dmesg - fusionio_iothread1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-71.18.1.el6.x86_64 (mockbuild@x86-006.build.bos.redhat.com) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Wed Feb 2 17:49:59 EST 2011
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cf379000 (usable)
BIOS-e820: 00000000cf379000 - 00000000cf38f000 (reserved)
BIOS-e820: 00000000cf38f000 - 00000000cf3ce000 (ACPI data)
BIOS-e820: 00000000cf3ce000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000330000000 (usable)
DMI 2.6 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x330000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFF0000000 write-back
3 base 0100000000 mask FF00000000 write-back
4 base 0200000000 mask FF00000000 write-back
5 base 0300000000 mask FFE0000000 write-back
6 base 0320000000 mask FFF0000000 write-back
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcf379 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cf379000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cf200000 page 2M
00cf200000 - 00cf379000 page 4k
kernel direct mapping tables up to cf379000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000000330000000
0100000000 - 0300000000 page 1G
0300000000 - 0330000000 page 2M
kernel direct mapping tables up to 330000000 @ a000-c000
RAMDISK: 37301000 - 37fef886
ACPI: RSDP 00000000000f1240 00024 (v02 DELL )
ACPI: XSDT 00000000000f1344 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000cf3b3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000cf38f000 03D72 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 00000000cf3b6000 00040
ACPI: APIC 00000000cf3b3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000cf3b35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000cf3b362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 00000000cf3b3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000cf3b38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000cf3b3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000cf3b3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000cf392ef4 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000cf393164 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000cf392d74 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000cf392da4 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 00000000cf3b3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000cf3b3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000cf3b7000 043F4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 1 -> APIC 32 -> Node 0
SRAT: PXM 2 -> APIC 0 -> Node 1
SRAT: PXM 1 -> APIC 34 -> Node 0
SRAT: PXM 2 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 50 -> Node 0
SRAT: PXM 2 -> APIC 18 -> Node 1
SRAT: PXM 1 -> APIC 52 -> Node 0
SRAT: PXM 2 -> APIC 20 -> Node 1
SRAT: PXM 1 -> APIC 33 -> Node 0
SRAT: PXM 2 -> APIC 1 -> Node 1
SRAT: PXM 1 -> APIC 35 -> Node 0
SRAT: PXM 2 -> APIC 3 -> Node 1
SRAT: PXM 1 -> APIC 51 -> Node 0
SRAT: PXM 2 -> APIC 19 -> Node 1
SRAT: PXM 1 -> APIC 53 -> Node 0
SRAT: PXM 2 -> APIC 21 -> Node 1
SRAT: Node 1 PXM 2 0-d0000000
SRAT: Node 1 PXM 2 100000000-1b0000000
SRAT: Node 0 PXM 1 1b0000000-330000000
NUMA: Using 28 for the hash shift.
Bootmem setup node 0 00000001b0000000-0000000330000000
NODE_DATA [00000001b0000000 - 00000001b0033fff]
bootmap [00000001b0034000 - 00000001b0063fff] pages 30
(8 early reservations) ==> bootmem [01b0000000 - 0330000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0001ca0ff8] TEXT DATA BSS
#3 [0037301000 - 0037fef886] RAMDISK
#4 [000009e800 - 0000100000] BIOS reserved
#5 [0001ca1000 - 0001ca14fd] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000000b000] PGTABLE
Bootmem setup node 1 0000000000000000-00000001b0000000
NODE_DATA [000000000000b000 - 000000000003efff]
bootmap [000000000003f000 - 0000000000074fff] pages 36
(8 early reservations) ==> bootmem [0000000000 - 01b0000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001ca0ff8] TEXT DATA BSS ==> [0001000000 - 0001ca0ff8]
#3 [0037301000 - 0037fef886] RAMDISK ==> [0037301000 - 0037fef886]
#4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
#5 [0001ca1000 - 0001ca14fd] BRK ==> [0001ca1000 - 0001ca14fd]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
found SMP MP-table at [ffff8800000fe710] fe710
Reserving 129MB of memory at 32MB for crashkernel (System RAM: 13056MB)
[ffffea0005e80000-ffffea0005ffffff] potential offnode page_structs
[ffffea0000000000-ffffea0005ffffff] PMD -> [ffff880028600000-ffff88002dbfffff] on node 1
[ffffea0006000000-ffffea000b3fffff] PMD -> [ffff8801b0200000-ffff8801b55fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00330000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
1: 0x00000001 -> 0x000000a0
1: 0x00000100 -> 0x000cf379
1: 0x00100000 -> 0x001b0000
0: 0x001b0000 -> 0x00330000
On node 0 totalpages: 1572864
Normal zone: 21504 pages used for memmap
Normal zone: 1551360 pages, LIFO batch:31
On node 1 totalpages: 1569560
DMA zone: 56 pages used for memmap
DMA zone: 103 pages reserved
DMA zone: 3840 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 830385 pages, LIFO batch:31
Normal zone: 9856 pages used for memmap
Normal zone: 711040 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x35] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 32 CPUs, 16 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000cf379000 - 00000000cf38f000
PM: Registered nosave memory: 00000000cf38f000 - 00000000cf3ce000
PM: Registered nosave memory: 00000000cf3ce000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s95064 r8192 d23720 u131072
pcpu-alloc: s95064 r8192 d23720 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 3096625
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
AMD-Vi disabled by default: pass amd_iommu=on to enable
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 12166476k/13369344k available (4939k kernel code, 799648k absent, 403220k reserved, 3932k data, 1220k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1208
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 125829120 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2394.215 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.43 BogoMIPS (lpj=2394215)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20287 entries in 80 pages
DMAR: Host address width 40
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
IOMMU fed90000: ver 1:0 cap c90780106f0462 ecap f020fe
DMAR: RMRR base: 0x000000cf4c8000 end: 0x000000cf4dffff
DMAR: RMRR base: 0x000000cf4b1000 end: 0x000000cf4bffff
DMAR: RMRR base: 0x000000cf4a1000 end: 0x000000cf4a1fff
DMAR: RMRR base: 0x000000cf4a3000 end: 0x000000cf4a3fff
DMAR: RMRR base: 0x000000cf4a5000 end: 0x000000cf4a5fff
DMAR: RMRR base: 0x000000cf4a7000 end: 0x000000cf4a7fff
DMAR: RMRR base: 0x000000cf4c0000 end: 0x000000cf4c0fff
DMAR: RMRR base: 0x000000cf4c2000 end: 0x000000cf4c2fff
DMAR: ATSR flags: 0x0
IOAPIC id 0 under DRHD base 0xfed90000
IOAPIC id 1 under DRHD base 0xfed90000
Enabled Interrupt-remapping
Setting APIC routing to physical flat
alloc irq_desc for 56 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
Booting Node 1, Processors #1 Ok.
Booting Node 0, Processors #2 Ok.
Booting Node 1, Processors #3 Ok.
Booting Node 0, Processors #4 Ok.
Booting Node 1, Processors #5 Ok.
Booting Node 0, Processors #6 Ok.
Booting Node 1, Processors #7 Ok.
Booting Node 0, Processors #8 Ok.
Booting Node 1, Processors #9 Ok.
Booting Node 0, Processors #10 Ok.
Booting Node 1, Processors #11 Ok.
Booting Node 0, Processors #12 Ok.
Booting Node 1, Processors #13 Ok.
Booting Node 0, Processors #14 Ok.
Booting Node 1, Processors #15
Brought up 16 CPUs
Total of 16 processors activated (76605.63 BogoMIPS).
Testing NMI watchdog ... OK.
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2600 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xec40-0xec5f]
pci 0000:00:1a.1: reg 20 io port: [0xec60-0xec7f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xde0fe000-0xde0fe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xec80-0xec9f]
pci 0000:00:1d.1: reg 20 io port: [0xeca0-0xecbf]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xde0ff000-0xde0ff3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
pci 0000:00:1f.2: reg 10 io port: [0xec10-0xec17]
pci 0000:00:1f.2: reg 14 io port: [0xec08-0xec0b]
pci 0000:00:1f.2: reg 18 io port: [0xec18-0xec1f]
pci 0000:00:1f.2: reg 1c io port: [0xec0c-0xec0f]
pci 0000:00:1f.2: reg 20 io port: [0xec20-0xec2f]
pci 0000:00:1f.2: reg 24 io port: [0xec30-0xec3f]
pci 0000:01:00.0: reg 10 64bit mmio: [0xd6000000-0xd7ffffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.1: reg 10 64bit mmio: [0xd8000000-0xd9ffffff]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: PME# disabled
pci 0000:00:01.0: bridge 32bit mmio: [0xd6000000-0xd9ffffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:03.0: bridge 32bit mmio: [0xda000000-0xddffffff]
pci 0000:03:00.0: reg 10 io port: [0xfc00-0xfcff]
pci 0000:03:00.0: reg 14 64bit mmio: [0xde2b0000-0xde2bffff]
pci 0000:03:00.0: reg 1c 64bit mmio: [0xde2c0000-0xde2fffff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xde100000-0xde1fffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:04.0: bridge io port: [0xf000-0xffff]
pci 0000:00:04.0: bridge 32bit mmio: [0xde100000-0xde2fffff]
pci 0000:05:00.0: reg 10 32bit mmio: [0xde3e0000-0xde3fffff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:06.0: bridge 32bit mmio: [0xde300000-0xde7fffff]
pci 0000:06:04.0: PME# supported from D0 D3hot D3cold
pci 0000:06:04.0: PME# disabled
pci 0000:06:05.0: PME# supported from D0 D3hot D3cold
pci 0000:06:05.0: PME# disabled
pci 0000:06:06.0: PME# supported from D0 D3hot D3cold
pci 0000:06:06.0: PME# disabled
pci 0000:05:00.0: bridge 32bit mmio: [0xde400000-0xde7fffff]
pci 0000:08:00.0: reg 24 32bit mmio: [0xde7f0000-0xde7fffff]
pci 0000:08:00.0: reg 30 32bit mmio pref: [0xde600000-0xde6fffff]
pci 0000:08:00.0: PME# supported from D0
pci 0000:08:00.0: PME# disabled
pci 0000:06:05.0: bridge 32bit mmio: [0xde600000-0xde7fffff]
pci 0000:09:00.0: reg 24 32bit mmio: [0xde5f0000-0xde5fffff]
pci 0000:09:00.0: reg 30 32bit mmio pref: [0xde400000-0xde4fffff]
pci 0000:09:00.0: PME# supported from D0
pci 0000:09:00.0: PME# disabled
pci 0000:06:06.0: bridge 32bit mmio: [0xde400000-0xde5fffff]
pci 0000:0c:03.0: reg 10 32bit mmio pref: [0xd5800000-0xd5ffffff]
pci 0000:0c:03.0: reg 14 32bit mmio: [0xdeffc000-0xdeffffff]
pci 0000:0c:03.0: reg 18 32bit mmio: [0xdf000000-0xdf7fffff]
pci 0000:0c:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xde800000-0xdf7fffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd5800000-0xd5ffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
vgaarb: device added: PCI:0000:0c:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x880-0x8ff could not be reserved
system 00:07: ioport range 0x900-0x91f has been reserved
system 00:07: ioport range 0x920-0x923 has been reserved
system 00:07: ioport range 0x924-0x924 has been reserved
system 00:07: ioport range 0xc00-0xc7f has been reserved
system 00:07: ioport range 0xca0-0xca7 has been reserved
system 00:07: ioport range 0xca9-0xcab has been reserved
system 00:07: ioport range 0xcad-0xcaf has been reserved
system 00:08: ioport range 0xca8-0xca8 has been reserved
system 00:08: ioport range 0xcac-0xcac has been reserved
system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0b: iomem range 0xfed90000-0xfed91fff has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [0xd6000000-0xd9ffffff]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [0xda000000-0xddffffff]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:00:04.0: PCI bridge to [bus 03-03]
pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
pci 0000:00:04.0: bridge window [0xf000-0xffff]
pci 0000:00:04.0: bridge window [0xde100000-0xde2fffff]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 04-04]
pci 0000:00:05.0: PCI bridge, secondary bus 0000:04
pci 0000:00:05.0: bridge window [io disabled]
pci 0000:00:05.0: bridge window [mem disabled]
pci 0000:00:05.0: bridge window [mem pref disabled]
pci 0000:06:04.0: PCI bridge to [bus 07-07]
pci 0000:06:04.0: PCI bridge, secondary bus 0000:07
pci 0000:06:04.0: bridge window [io disabled]
pci 0000:06:04.0: bridge window [mem disabled]
pci 0000:06:04.0: bridge window [mem pref disabled]
pci 0000:06:05.0: PCI bridge to [bus 08-08]
pci 0000:06:05.0: PCI bridge, secondary bus 0000:08
pci 0000:06:05.0: bridge window [0x1000-0x1fff]
pci 0000:06:05.0: bridge window [0xde600000-0xde7fffff]
pci 0000:06:05.0: bridge window [0xd0000000-0xd01fffff]
pci 0000:06:06.0: PCI bridge to [bus 09-09]
pci 0000:06:06.0: PCI bridge, secondary bus 0000:09
pci 0000:06:06.0: bridge window [io disabled]
pci 0000:06:06.0: bridge window [0xde400000-0xde5fffff]
pci 0000:06:06.0: bridge window [mem pref disabled]
pci 0000:05:00.0: PCI bridge to [bus 06-09]
pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
pci 0000:05:00.0: bridge window [0x1000-0x1fff]
pci 0000:05:00.0: bridge window [0xde400000-0xde7fffff]
pci 0000:05:00.0: bridge window [0xd0000000-0xd01fffff]
pci 0000:00:06.0: PCI bridge to [bus 05-09]
pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
pci 0000:00:06.0: bridge window [0x1000-0x1fff]
pci 0000:00:06.0: bridge window [0xde300000-0xde7fffff]
pci 0000:00:06.0: bridge window [0xd0000000-0xd01fffff]
pci 0000:00:07.0: PCI bridge to [bus 0a-0a]
pci 0000:00:07.0: PCI bridge, secondary bus 0000:0a
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 0b-0b]
pci 0000:00:09.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:09.0: bridge window [io disabled]
pci 0000:00:09.0: bridge window [mem disabled]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [0xde800000-0xdf7fffff]
pci 0000:00:1e.0: bridge window [0xd5800000-0xd5ffffff]
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:06.0: setting latency timer to 64
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:05:00.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35
pci 0000:05:00.0: setting latency timer to 64
pci 0000:06:04.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35
pci 0000:06:04.0: setting latency timer to 64
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:06:05.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
pci 0000:06:05.0: setting latency timer to 64
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:06:06.0: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:06:06.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xd6000000-0xd9ffffff]
pci_bus 0000:02: resource 1 mem: [0xda000000-0xddffffff]
pci_bus 0000:03: resource 0 io: [0xf000-0xffff]
pci_bus 0000:03: resource 1 mem: [0xde100000-0xde2fffff]
pci_bus 0000:05: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:05: resource 1 mem: [0xde300000-0xde7fffff]
pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xd01fffff]
pci_bus 0000:06: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:06: resource 1 mem: [0xde400000-0xde7fffff]
pci_bus 0000:06: resource 2 pref mem [0xd0000000-0xd01fffff]
pci_bus 0000:08: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:08: resource 1 mem: [0xde600000-0xde7fffff]
pci_bus 0000:08: resource 2 pref mem [0xd0000000-0xd01fffff]
pci_bus 0000:09: resource 1 mem: [0xde400000-0xde5fffff]
pci_bus 0000:0c: resource 1 mem: [0xde800000-0xdf7fffff]
pci_bus 0000:0c: resource 2 pref mem [0xd5800000-0xd5ffffff]
pci_bus 0000:0c: resource 3 io: [0x00-0xffff]
pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:0c:03.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13242k freed
DMAR: Device scope device [0000:00:1a.02] not found
DMAR: Device scope device [0000:00:1a.02] not found
DMAR: Device scope device [0000:00:1d.02] not found
DMAR: Device scope device [0000:00:1d.02] not found
audit: initializing netlink socket (disabled)
type=2000 audit(1298629156.361:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 23788
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key B0AF55024C39DF6B
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 57 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:03.0: irq 58 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:04.0: irq 59 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:05.0: irq 60 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:06.0: irq 61 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:07.0: irq 62 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:09.0: irq 63 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:05:00.0: irq 64 for MSI/MSI-X
pcieport 0000:05:00.0: setting latency timer to 64
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:06:04.0: irq 65 for MSI/MSI-X
pcieport 0000:06:04.0: setting latency timer to 64
alloc irq_desc for 66 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:06:05.0: irq 66 for MSI/MSI-X
pcieport 0000:06:05.0: setting latency timer to 64
alloc irq_desc for 67 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:06:06.0: irq 67 for MSI/MSI-X
pcieport 0000:06:06.0: setting latency timer to 64
aer 0000:00:01.0:pcie02: PCIe errors handled by platform firmware.
aer 0000:00:03.0:pcie02: PCIe errors handled by platform firmware.
aer 0000:00:04.0:pcie02: PCIe errors handled by platform firmware.
aer 0000:00:05.0:pcie02: PCIe errors handled by platform firmware.
aer 0000:00:06.0:pcie02: PCIe errors handled by platform firmware.
aer 0000:00:07.0:pcie02: PCIe errors handled by platform firmware.
aer 0000:00:09.0:pcie02: PCIe errors handled by platform firmware.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
processor LNXCPU:08: registered as cooling_device8
processor LNXCPU:09: registered as cooling_device9
processor LNXCPU:0a: registered as cooling_device10
processor LNXCPU:0b: registered as cooling_device11
processor LNXCPU:0c: registered as cooling_device12
processor LNXCPU:0d: registered as cooling_device13
processor LNXCPU:0e: registered as cooling_device14
processor LNXCPU:0f: registered as cooling_device15
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.0
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xde0fe000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-71.18.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xde0ff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-71.18.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-71.18.1.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-71.18.1.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-71.18.1.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-71.18.1.el6.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2011-02-25 10:19:17 UTC (1298629157)
Initalizing network drop monitor service
Freeing unused kernel memory: 1220k freed
Write protecting the kernel read-only data: 7184k
dracut: dracut-004-33.2.el6_0
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
mpt2sas version 05.100.00.02 loaded
scsi0 : Fusion MPT SAS Host
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
mpt2sas 0000:03:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
mpt2sas 0000:03:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (12180940 kB)
alloc irq_desc for 68 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
mpt2sas 0000:03:00.0: irq 68 for MSI/MSI-X
mpt2sas0: PCI-MSI-X enabled: IRQ 68
mpt2sas0: iomem(0x00000000de2b0000), mapped(0xffffc90012620000), size(65536)
mpt2sas0: ioport(0x000000000000fc00), size(256)
mpt2sas0: sending diag reset !!
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb 1-3: New USB device found, idVendor=0424, idProduct=2514
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 3 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: New USB device found, idVendor=14dd, idProduct=1009
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: DCIM-USBG2
usb 3-1: Manufacturer: Raritan
usb 3-1: configuration #1 chosen from 1 choice
input: Raritan DCIM-USBG2 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2
generic-usb 0003:14DD:1009.0001: input,hidraw0: USB HID v1.10 Keyboard [Raritan DCIM-USBG2] on usb-0000:00:1a.0-1/input0
input: Raritan DCIM-USBG2 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input3
generic-usb 0003:14DD:1009.0002: input,hidraw1: USB HID v1.10 Mouse [Raritan DCIM-USBG2] on usb-0000:00:1a.0-1/input1
mpt2sas0: diag reset: SUCCESS
mpt2sas0: Allocated physical memory: size(1091 kB)
mpt2sas0: Current Controller Queue Depth(467), Max Controller Queue Depth(3439)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2008: FWVersion(02.15.63.00), ChipRevision(0x03), BiosVersion(07.01.09.00)
mpt2sas0: Dell PERC H200 Integrated: Vendor(0x1000), Device(0x0072), SSVID(0x1028), SSDID(0x1F1E)
mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
mpt2sas0: host_add: handle(0x0001), sas_addr(0x5842b2b07723c000), phys(8)
mpt2sas0: failure at drivers/scsi/mpt2sas/mpt2sas_scsih.c:4147/_scsih_add_device()!
mpt2sas0: port enable: SUCCESS
scsi 0:0:0:0: Direct-Access Pliant LB150S D012 PQ: 0 ANSI: 5
scsi 0:0:0:0: SSP: handle(0x000a), sas_addr(0x5001e8200001c112), device_name(0x20e8015011c10100)
scsi 0:0:0:0: SSP: enclosure_logical_id(0x5842b2b07723c000), slot(0)
scsi 0:0:0:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
ata_piix 0000:00:1f.2: version 2.13
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 23
ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 23
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100
ata1.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM TEAC DVD-ROM DV-28SW R.2A PQ: 0 ANSI: 5
ata2: failed to resume link (SControl 0)
ata2: SATA link down (SStatus 4 SControl 0)
sd 0:0:0:0: [sda] 291093264 512-byte logical blocks: (149 GB/138 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: e3 00 10 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda1): mounted filesystem with ordered data mode
EXT4-fs (sda1): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sda1
dracut: Loading SELinux policy
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1298629168.467:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: Can't load policy: No such file or directory
dracut: Switching root
readahead-collector: starting
udev: starting version 147
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.8-j15 (Feb 15, 2010)
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
bnx2 0000:01:00.0: setting latency timer to 64
bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j15.fw
bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j10.fw
eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr b8:ac:6f:98:9b:31
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
bnx2 0000:01:00.1: setting latency timer to 64
bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j15.fw
bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j10.fw
eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr b8:ac:6f:98:9b:33
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
bnx2 0000:02:00.0: setting latency timer to 64
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j15.fw
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j10.fw
eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr b8:ac:6f:98:9b:35
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.1: PCI INT B -> GSI 42 (level, low) -> IRQ 42
bnx2 0000:02:00.1: setting latency timer to 64
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j15.fw
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j10.fw
eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr b8:ac:6f:98:9b:37
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
EDAC MC: Ver: 2.1.0 Feb 2 2011
PCI: Discovered peer bus ff
PCI: Discovered peer bus fe
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
EDAC MC1: Giving out device to 'i7core_edac.c' 'i7 core #1': DEV 0000:fe:03.0
EDAC PCI1: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED)
EDAC i7core: Driver loaded.
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ACPI Error: No handler for Region [IPMI] (ffff8801a97a1420) [IPMI] (20090903/evregion-319)
ACPI Error: Region IPMI(7) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff880328e608d0), AE_NOT_EXIST
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff880328e60910), AE_NOT_EXIST
ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20090903/power_meter-772)
EXT4-fs (dm-0): mounted filesystem with ordered data mode
EXT4-fs (dm-1): mounted filesystem with ordered data mode
EXT4-fs (dm-2): mounted filesystem with ordered data mode
readahead-disable-service: delaying service auditd
microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU12 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU13 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU14 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU15 sig=0x206c2, pf=0x1, revision=0x13
platform microcode: firmware: requesting intel-ucode/06-2c-02
Microcode Update Driver: v2.00 , Peter Oruba
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
alloc irq_desc for 69 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:01:00.0: irq 69 for MSI/MSI-X
alloc irq_desc for 70 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:01:00.0: irq 70 for MSI/MSI-X
alloc irq_desc for 71 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:01:00.0: irq 71 for MSI/MSI-X
alloc irq_desc for 72 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:01:00.0: irq 72 for MSI/MSI-X
alloc irq_desc for 73 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:01:00.0: irq 73 for MSI/MSI-X
alloc irq_desc for 74 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:01:00.0: irq 74 for MSI/MSI-X
alloc irq_desc for 75 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:01:00.0: irq 75 for MSI/MSI-X
alloc irq_desc for 76 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:01:00.0: irq 76 for MSI/MSI-X
alloc irq_desc for 77 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:01:00.0: irq 77 for MSI/MSI-X
bnx2: eth0: using MSIX
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
EXT4-fs warning (device dm-2): release_blocks_on_commit: discard not supported, disabling
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
EXT4-fs warning (device sda1): release_blocks_on_commit: discard not supported, disabling
EXT4-fs warning (device dm-0): release_blocks_on_commit: discard not supported, disabling
eth0: no IPv6 routers present
Bridge firewalling registered
virbr0: starting userspace STP failed, starting kernel STP
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
lo: Disabled Privacy Extensions
readahead-collector: starting delayed service auditd
readahead-collector: sorting
readahead-collector: finished
EXT4-fs (dm-3): mounted filesystem with ordered data mode
EXT4-fs warning (device dm-1): release_blocks_on_commit: discard not supported, disabling
iomemory_vsl: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
fioinf Using Linux I/O Scheduler
fioinf
fioinf Copyright 2006-2010 Fusion Multisystems, Inc. dba Fusion-io. All rights reserved.
fioinf For Terms and Conditions see the License file included
fioinf with this driver package.
fioinf
fioinf ioDrive driver 2.2.2.61 hovenweep@e0c5cec17853 loading...
iodrive 0000:08:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
iodrive 0000:08:00.0: setting latency timer to 64
fioinf ioDrive 0000:08:00.0: mapped controller on BAR 5
fioinf ioDrive 0000:08:00.0: Firmware version 5.0.3 43247 (0x500003 0xa8ef)
fioinf ioDrive 0000:08:00.0: MID: dual_plane enabled
fioinf ioDrive 0000:08:00.0: board part number is 2784
fioinf ioDrive 0000:08:00.0: board id (serial 78052 part 2784 revision 1)
fioinf ioDrive 0000:08:00.0: using legacy interrupts
fioinf ioDrive 0000:08:00.0: Resetting NAND controller
fioinf ioDrive 0000:08:00.0: enabling 1-bit hardware ECC corrections.
fioinf ioDrive 0000:08:00.0: using v2 packetizer interface.
fioinf ioDrive 0000:08:00.0: powercut flush supported.
fioinf ioDrive 0000:08:00.0: Slices supported.
fioinf ioDrive 0000:08:00.0: Nand DCM Lock = 1
fioinf ioDrive 0000:08:00.0: reduced-write threshold 96.0%
fioinf ioDrive 0000:08:00.0: capacity warning thresh 10.0%
fioinf ioDrive 0000:08:00.0: read-only threshold 94.0%
fioinf ioDrive 0000:08:00.0: PCIe power monitor enabled (master). Limit set to 24.750 watts.
fioinf ioDrive 0000:08:00.0: Thermal monitoring: enabled
fioinf Fusion-io ioDrive Duo 640GB 0000:08:00.0: Found device 0000:08:00.0
fioinf Fusion-io ioDrive Duo 640GB 0000:08:00.0: flushed write pipeline.
fioinf 0000:08:00.0: found LEB map revision 6 in EB 0.
fioinf 0000:08:00.0: found LEB map revision 6 in EB 1.
fioinf Fusion-io ioDrive Duo 640GB 0000:08:00.0: Scanning for NV data...
fioinf Fusion-io ioDrive Duo 640GB 0000:08:00.0: No NV data available
fioinf Fusion-io ioDrive Duo 640GB 0000:08:00.0: Init NV data
fioinf Waiting for /dev/fct0 to be created
fioinf Fusion-io ioDrive Duo 640GB 0000:08:00.0: probed fct0
iodrive 0000:09:00.0: PCI INT A -> GSI 45 (level, low) -> IRQ 45
iodrive 0000:09:00.0: setting latency timer to 64
fioinf ioDrive 0000:09:00.0: mapped controller on BAR 5
fioinf ioDrive 0000:09:00.0: Firmware version 5.0.3 43247 (0x500003 0xa8ef)
fioinf ioDrive 0000:09:00.0: MID: dual_plane enabled
fioinf ioDrive 0000:09:00.0: board part number is 2784
fioinf ioDrive 0000:09:00.0: board id (serial 78048 part 2784 revision 1)
fioinf Fusion-io ioDrive Duo 640GB 0000:08:00.0: sector_size=512
fioinf Fusion-io ioDrive Duo 640GB 0000:08:00.0: setting channel range data to [1 .. 4094]
fioinf Fusion-io ioDrive Duo 640GB 0000:08:00.0: setting up object store: data
fioinf Fusion-io ioDrive Duo 640GB 0000:08:00.0: Attaching log data (512 byte sectors)...
fioinf Fusion-io ioDrive Duo 640GB 0000:08:00.0: 629986688 sectors vol 6059c0a1-33d2-42b3-8986-86f653dae5bc
fioinf Fusion-io ioDrive Duo 640GB 0000:08:00.0: Attach succeeded for data
fioinf ioDrive 0000:09:00.0: using legacy interrupts
fioinf ioDrive 0000:09:00.0: Resetting NAND controller
fioinf ioDrive 0000:09:00.0: enabling 1-bit hardware ECC corrections.
fioinf ioDrive 0000:09:00.0: using v2 packetizer interface.
fioinf ioDrive 0000:09:00.0: powercut flush supported.
fioinf ioDrive 0000:09:00.0: Slices supported.
fioinf ioDrive 0000:09:00.0: Nand DCM Lock = 1
fioinf ioDrive 0000:09:00.0: reduced-write threshold 96.0%
fioinf ioDrive 0000:09:00.0: capacity warning thresh 10.0%
fioinf ioDrive 0000:09:00.0: read-only threshold 94.0%
fioinf ioDrive 0000:09:00.0: PCIe power monitor enabled (slave). Limit set to 24.750 watts.
fioinf ioDrive 0000:09:00.0: Thermal monitoring: enabled
fioinf Fusion-io ioDrive Duo 640GB 0000:09:00.0: Found device 0000:09:00.0
fioinf Fusion-io ioDrive Duo 640GB 0000:09:00.0: flushed write pipeline.
fioinf 0000:09:00.0: found LEB map revision 6 in EB 0.
fioinf 0000:09:00.0: found LEB map revision 6 in EB 1.
fioinf Fusion-io ioDrive Duo 640GB 0000:08:00.0: Found metadata in EBs 3-3, loading...
blk_queue_max_segment_size: set to minimum 4096
fioinf Fusion-io ioDrive Duo 640GB 0000:08:00.0: Creating block device fioa: major: 252 minor: 0 sector size: 512...
fioa: unknown partition table
fioinf Waiting for /dev/fioa to be created
fioinf Fusion-io ioDrive Duo 640GB 0000:09:00.0: Scanning for NV data...
fioinf Fusion-io ioDrive Duo 640GB 0000:09:00.0: No NV data available
fioinf Fusion-io ioDrive Duo 640GB 0000:09:00.0: Init NV data
fioinf Waiting for /dev/fct1 to be created
fioinf Fusion-io ioDrive Duo 640GB 0000:09:00.0: probed fct1
fioinf Fusion-io ioDrive Duo 640GB 0000:09:00.0: sector_size=512
fioinf Fusion-io ioDrive Duo 640GB 0000:09:00.0: setting channel range data to [1 .. 4094]
fioinf Fusion-io ioDrive Duo 640GB 0000:09:00.0: setting up object store: data
fioinf Fusion-io ioDrive Duo 640GB 0000:09:00.0: Attaching log data (512 byte sectors)...
fioinf Fusion-io ioDrive Duo 640GB 0000:09:00.0: 629986688 sectors vol c0c75726-63e4-427e-9aaf-45302eb5b91d
fioinf Fusion-io ioDrive Duo 640GB 0000:09:00.0: Attach succeeded for data
fioinf Fusion-io ioDrive Duo 640GB 0000:09:00.0: Found metadata in EBs 3-3, loading...
blk_queue_max_segment_size: set to minimum 4096
fioinf Fusion-io ioDrive Duo 640GB 0000:09:00.0: Creating block device fiob: major: 252 minor: 16 sector size: 512...
fiob: unknown partition table
fioinf Waiting for /dev/fiob to be created
EXT4-fs (fioa): mounted filesystem with ordered data mode
EXT4-fs (fiob): mounted filesystem with ordered data mode
EXT4-fs (fioa): mounted filesystem with ordered data mode
EXT4-fs (fiob): mounted filesystem with ordered data mode
mpt2sas 0000:03:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
mpt2sas 0000:03:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
fio[20834]: segfault at 0 ip 0000000000417ad0 sp 00007fffc227b2b0 error 6 in fio[400000+31000]
fio[20847]: segfault at 0 ip 0000000000417ad0 sp 00007fff45848790 error 6 in fio[400000+31000]
fio[20861]: segfault at 0 ip 0000000000417ad0 sp 00007fff9a8899f0 error 6 in fio[400000+31000]
mpt2sas 0000:03:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
mpt2sas 0000:03:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
mpt2sas 0000:03:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
mpt2sas 0000:03:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
mpt2sas 0000:03:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.