Compare your own system(s) to this result file with the
Phoronix Test Suite by running the command:
phoronix-test-suite benchmark 1907022-HV-1809111RA89 Various ARM Linux Benchmarks - Spetember 2018 - Phoronix Test Suite Various ARM Linux Benchmarks - Spetember 2018 stock jetson nano
HTML result view exported from: https://openbenchmarking.org/result/1907022-HV-1809111RA89&sor&grs .
Various ARM Linux Benchmarks - Spetember 2018 Processor Motherboard Memory Disk Monitor Graphics Audio Network OS Kernel Compiler File-System Screen Resolution Display Server Desktop Display Driver Vulkan ALL-H3-CC H2+ ALL-H3-CC H3 ALL-H3-CC H5 AML-S905X-CC Le Potato Banana Pi M3 Firefly ROC-RK3328-CC Jetson TX1 Jetson TX2 ODROID-C1+ ODROID-C2 Pine64 1GB Raspberry Pi 2 B Raspberry Pi 3 B Raspberry Pi 3 B+ Socionext Developerbox Tinker Board jetson_nano ARMv7 rev 5 @ 0.91GHz (4 Cores) Allwinner sun8i Family Libre Board ALL-H3-CC H3 493MB 32GB SC32G VE228 Ubuntu 18.04 4.14.65-sunxi (armv7l) GCC 7.3.0 ext4 1920x1080 1024MB 32GB GB1QT ARMVv8 Cortex-A53 (4 Cores) Libre Board ALL-H3-CC H5 2048MB Raspbian 9.4 4.18.0-rc3-gfc36def997cf-dirty (aarch64) X Server 1.19.2 GCC 6.3.0 20170516 Unknown @ 1.51GHz (4 Cores) Libre Board AML-S905X-CC 32GB SC32G Acer P243W 4.14.53-00653-gc01abe8ba6bc (aarch64) LXDE 1920x1200 ARMv7 rev 5 @ 1.80GHz (8 Cores) sun8i 32GB SC32G + 8GB M8G1GC PowerVR Raspbian 8.0 3.4.39-BPI-M3-Kernel (armv7l) X Server 1.18.4 GCC 4.9.2 1280x720 Rockchip @ 1.39GHz (4 Cores) Firefly ROC-RK3328-CC 32GB GB1QT Acer P243W Ubuntu 18.04 4.4.114 (aarch64) GCC 7.3.0 1920x1080p60 ARMv8 rev 1 @ 1.73GHz (4 Cores) jetson_tx1 4096MB 16GB 016G32 NVIDIA TEGRA Ubuntu 16.04 4.4.38-tegra (aarch64) Unity 7.4.5 NVIDIA 1.0.0 1.0.8 GCC 5.4.0 20160609 1920x1200 ARMv8 rev 3 @ 2.04GHz (6 Cores) quill 8192MB 31GB 032G34 DELL P2415Q 3840x2160 ARMv7 rev 1 @ 1.54GHz (4 Cores) ODROIDC 804MB 32GB GB1QT ARM Mali 3.10.107-190 (armv7l) 1920x2160 Amlogic @ 1.54GHz (4 Cores) ODROID-C2 2048MB OSD Ubuntu 18.04 3.16.57-20 (aarch64) X Server 1.19.6 GCC 7.3.0 1920x1200 AArch64 rev 4 @ 1.15GHz (4 Cores) sun50iw1p1 1024MB 32GB SC32G Ubuntu 16.04 3.10.104 (aarch64) X Server 1.18.4 GCC 5.4.0 20160609 1920x1080 ARMv7 rev 5 @ 0.90GHz (4 Cores) BCM2835 Raspberry Pi 2 Model B Rev 1.1 927MB 32GB GB2MW BCM2708 Raspbian 9.4 4.14.50-v7+ (armv7l) LXDE X Server 1.19.2 GCC 6.3.0 20170516 1920x1200 ARMv7 rev 4 @ 1.20GHz (4 Cores) BCM2835 Raspberry Pi 3 Model B Rev 1.2 32GB GB1QT 4.14.62-v7+ (armv7l) 656x416 ARMv7 rev 4 @ 1.40GHz (4 Cores) BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3 32GB GB2MW 1920x1200 Unknown (24 Cores) Socionext SynQuacer E- DeveloperBox (build #38 BIOS) 32768MB 8GB M32508 + 1000GB Samsung SSD 970 EVO 1TB ASUS NVIDIA GeForce GT 710B 1024MB NVIDIA GK208 HDMI/DP ASUS VG236 Ubuntu 18.04 4.15.0-33-generic (aarch64) GCC 7.3.0 1920x1080 ARMv7 rev 1 @ 1.80GHz (4 Cores) Rockchip (Device Tree) 2048MB 32GB GB1QT Acer P243W Debian 9.0 4.4.16-00006-g4431f98-dirty (armv7l) LXDE X Server 1.18.4 GCC 6.3.0 20170516 ARMv8 rev 1 @ 1.43GHz (4 Cores) jetson-nano 4096MB 32GB SL32G NVIDIA TEGRA E201W Realtek RTL8111/8168/8411 + Intel 8265 / 8275 Ubuntu 18.04 4.9.140-tegra (aarch64) Unity 7.5.0 X Server 1.19.6 NVIDIA 1.0.0 1.1.85 GCC 7.4.0 + CUDA 10.0 1600x900 OpenBenchmarking.org Compiler Details - ALL-H3-CC H2+: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v - ALL-H3-CC H3: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v - ALL-H3-CC H5: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - AML-S905X-CC Le Potato: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Banana Pi M3: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v - Firefly ROC-RK3328-CC: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v - Jetson TX1: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v - Jetson TX2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v - ODROID-C1+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v - ODROID-C2: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v - Pine64 1GB: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v - Raspberry Pi 2 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Raspberry Pi 3 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Raspberry Pi 3 B+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Socionext Developerbox: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v - Tinker Board: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v - jetson_nano: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v Processor Details - ALL-H3-CC H2+: Scaling Governor: cpufreq-dt ondemand - ALL-H3-CC H3: Scaling Governor: cpufreq-dt ondemand - AML-S905X-CC Le Potato: Scaling Governor: arm-big-little ondemand - Banana Pi M3: Scaling Governor: sunxi-iks ondemand - Firefly ROC-RK3328-CC: Scaling Governor: cpufreq-dt performance - Jetson TX1: Scaling Governor: tegra-cpufreq interactive - Jetson TX2: Scaling Governor: tegra_cpufreq schedutil - ODROID-C1+: Scaling Governor: meson_cpufreq performance - ODROID-C2: Scaling Governor: meson_cpufreq performance - Pine64 1GB: Scaling Governor: cpufreq-sunxi interactive - Raspberry Pi 2 B: Scaling Governor: BCM2835 Freq ondemand - Raspberry Pi 3 B: Scaling Governor: BCM2835 Freq ondemand - Raspberry Pi 3 B+: Scaling Governor: BCM2835 Freq ondemand - Tinker Board: Scaling Governor: cpufreq-dt interactive - jetson_nano: Scaling Governor: tegra-cpufreq schedutil Python Details - ALL-H3-CC H2+: Python 2.7.15rc1 + Python 3.6.5 - ALL-H3-CC H3: Python 2.7.15rc1 + Python 3.6.5 - ALL-H3-CC H5: Python 2.7.13 + Python 3.5.3 - AML-S905X-CC Le Potato: Python 2.7.13 + Python 3.5.3 - Banana Pi M3: Python 2.7.9 + Python 3.4.2 - Firefly ROC-RK3328-CC: Python 2.7.15rc1 + Python 3.6.5 - Jetson TX1: Python 2.7.12 + Python 3.5.2 - Jetson TX2: Python 2.7.12 + Python 3.5.2 - ODROID-C1+: Python 2.7.12 + Python 3.5.2 - ODROID-C2: Python 2.7.15rc1 + Python 3.6.5 - Pine64 1GB: Python 2.7.12 + Python 3.5.2 - Raspberry Pi 2 B: Python 2.7.13 + Python 3.5.3 - Raspberry Pi 3 B: Python 2.7.13 + Python 3.5.3 - Raspberry Pi 3 B+: Python 2.7.13 + Python 3.5.3 - Socionext Developerbox: Python 2.7.15rc1 + Python 3.6.5 - Tinker Board: Python 2.7.13 + Python 3.5.3 - jetson_nano: Python 2.7.15+ + Python 3.6.8 Disk Mount Options Details - Jetson TX2: data=ordered,relatime,rw - ODROID-C2: errors=remount-ro,noatime,rw - Pine64 1GB: data=ordered,noatime,rw,stripe=1024 - Raspberry Pi 2 B: data=ordered,noatime,rw - Raspberry Pi 3 B: data=ordered,noatime,rw - Raspberry Pi 3 B+: data=ordered,noatime,rw - Tinker Board: data=ordered,noatime,rw Disk Details - Socionext Developerbox: NONE / data=ordered,errors=remount-ro,relatime,rw
Various ARM Linux Benchmarks - Spetember 2018 encode-flac: WAV To FLAC compress-7zip: Compress Speed Test ttsiod-renderer: Phong Rendering With Soft-Shadow Mapping pybench: Total For Average Test Times phpbench: PHP Benchmark Suite encode-mp3: WAV To MP3 perl-benchmark: Pod2html tinymembench: Standard Memcpy aobench: 2048 x 2048 - Total Time compress-zstd: Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19 hint: FLOAT scikit-learn: primesieve: 1e12 Prime Number Generation perl-benchmark: Interpreter redis: GET redis: SET x264: H.264 Video Encoding c-ray: Total Time - 4K, 16 Rays Per Pixel pgbench: Buffer Test - Normal Load - Read Only git: Time To Complete Common Git Commands pgbench: Buffer Test - Normal Load - Read Write ALL-H3-CC H2+ ALL-H3-CC H3 ALL-H3-CC H5 AML-S905X-CC Le Potato Banana Pi M3 Firefly ROC-RK3328-CC Jetson TX1 Jetson TX2 ODROID-C1+ ODROID-C2 Pine64 1GB Raspberry Pi 2 B Raspberry Pi 3 B Raspberry Pi 3 B+ Socionext Developerbox Tinker Board jetson_nano 537.27 1162 10.73 29409 26622 535.90 2.27366223 827 698 1407 34637880 1975 0.01012165 1.13 4166 91.83 537.42 1197 10.83 29389 26642 536.62 2.26615629 912 700 1383 34640333 2246 1940 0.01010965 1.14 4156 87.37 566.38 1301 11.91 40680 21324 518.51 2.57579869 1339 491 1219 34003720 1515 1623 0.01057718 54779 37927 3088 77.19 334.63 2209 20.30 22876 37855 300.96 1.49377750 2095 282 808 59121388 954 891 0.00776080 102953 71525 1755 5502 54.41 603 279.92 2654 15990 18202 266.35 2.59638113 738 461 1069 67935371 221 876 0.03473245 124215 79881 1669 293.37 1951 14030 53802 296.20 1.31366123 1566 289 848 61129612 650 934 0.00514761 265608 189623 2.12 1773 2977 40.04 263 78.86 4526 45.05 6348 111979 113.14 0.60071034 3862 165 441 88381313 434 401 0.00235869 484688 333535 5.96 851 16079 23.66 1222 65.15 5650 5357 133175 95.91 0.48746904 3798 134 455 103988087 0.00987031 660813 432278 675 14427 17.57 1793 344.23 1477 14.15 23773 34052 331.01 1.73162418 928 457 978 55729881 1631 1591 0.00814231 167346 100561 1.46 2720 5199 69.23 345 263.28 2198 23.07 12775 59176 266.80 1.11893361 1688 260 822 67673261 664 599 0.00551193 271547 194581 2.89 1537 6059 38.99 719 352.20 15.73 20196 36988 350.19 1.40449621 1377 352 1034 50185204 853 943 0.01025786 255546 159810 2.12 2342 4555 52.64 456 534.59 1125 10.94 37907 20836 514.11 2.46504575 956 667 1315 35952660 2328 1897 0.01345155 113111 67210 1.10 4375 3856 97.32 133 387.09 1863 15.66 24349 34420 352.66 1.29447902 1297 333 934 50009135 844 1543 0.00842084 213067 131764 2.03 2357 6640 57.19 409 336.07 1796 16.82 20923 40165 301.98 1.11833973 1288 290 867 57957193 785 1113 0.00742901 240761 150337 2.09 2074 6526 51.84 144 390.76 9368 89.28 19386 38922 406.39 1.57088061 1543 400 931 44150376 899 133 0.00658840 235721 160053 12.41 391 31506 46.37 4166 122.05 3472 27.80 9256 66398 145.59 0.69415680 1502 192 573 80755325 474 0.00428081 326351 218747 4.42 1048 13309 26.06 1142 112.25 3928 38.87 7096 101772 143.52 0.72673013 3455 189 407 66921969 151 488 0.00453442 563104 390683 5.05 1050 12068 156.74 316 OpenBenchmarking.org
PostgreSQL pgbench Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read Only OpenBenchmarking.org TPS Per Dollar, More Is Better PostgreSQL pgbench 10.3 Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read Only Tinker Board Raspberry Pi 3 B Raspberry Pi 3 B+ AML-S905X-CC Le Potato ODROID-C1+ ODROID-C2 Firefly ROC-RK3328-CC Jetson TX1 Socionext Developerbox Jetson TX2 50 100 150 200 250 234.11 189.77 164.05 122.27 106.10 96.25 59.54 33.71 26.26 26.23 1. Tinker Board: $56.85 reported cost. 2. Raspberry Pi 3 B: $34.99 reported cost. 3. Raspberry Pi 3 B+: $39.78 reported cost. 4. AML-S905X-CC Le Potato: $45.00 reported cost. 5. ODROID-C1+: $49.00 reported cost. 6. ODROID-C2: $62.95 reported cost. 7. Firefly ROC-RK3328-CC: $50.00 reported cost. 8. Jetson TX1: $476.99 reported cost. 9. Socionext Developerbox: $1200.00 reported cost. 10. Jetson TX2: $549.99 reported cost.
FLAC Audio Encoding WAV To FLAC OpenBenchmarking.org Seconds, Fewer Is Better FLAC Audio Encoding 1.3.2 WAV To FLAC Jetson TX2 Jetson TX1 jetson_nano Tinker Board ODROID-C2 Banana Pi M3 Firefly ROC-RK3328-CC AML-S905X-CC Le Potato Raspberry Pi 3 B+ ODROID-C1+ Pine64 1GB Raspberry Pi 3 B Socionext Developerbox Raspberry Pi 2 B ALL-H3-CC H2+ ALL-H3-CC H3 ALL-H3-CC H5 120 240 360 480 600 SE +/- 0.17, N = 5 SE +/- 0.39, N = 5 SE +/- 3.45, N = 25 SE +/- 1.28, N = 5 SE +/- 1.35, N = 5 SE +/- 1.17, N = 5 SE +/- 1.63, N = 5 SE +/- 0.86, N = 5 SE +/- 0.93, N = 5 SE +/- 1.72, N = 5 SE +/- 0.17, N = 5 SE +/- 0.55, N = 5 SE +/- 0.03, N = 5 SE +/- 2.05, N = 5 SE +/- 0.65, N = 5 SE +/- 0.68, N = 5 SE +/- 0.29, N = 5 65.15 78.86 112.25 122.05 263.28 279.92 293.37 334.63 336.07 344.23 352.20 387.09 390.76 534.59 537.27 537.42 566.38 -logg -logg -logg -logg -logg -logg -logg -logg -logg -logg -logg -logg -logg -logg -logg -logg 1. (CXX) g++ options: -O2 -fvisibility=hidden -lm
7-Zip Compression Compress Speed Test OpenBenchmarking.org MIPS, More Is Better 7-Zip Compression 16.02 Compress Speed Test Socionext Developerbox Jetson TX2 Jetson TX1 jetson_nano Tinker Board Banana Pi M3 AML-S905X-CC Le Potato ODROID-C2 Firefly ROC-RK3328-CC Raspberry Pi 3 B Raspberry Pi 3 B+ ODROID-C1+ ALL-H3-CC H5 ALL-H3-CC H3 ALL-H3-CC H2+ Raspberry Pi 2 B 2K 4K 6K 8K 10K SE +/- 58.09, N = 3 SE +/- 11.46, N = 3 SE +/- 28.68, N = 3 SE +/- 20.13, N = 3 SE +/- 36.57, N = 3 SE +/- 43.13, N = 9 SE +/- 4.16, N = 3 SE +/- 17.25, N = 3 SE +/- 0.67, N = 3 SE +/- 3.84, N = 3 SE +/- 16.51, N = 3 SE +/- 13.74, N = 3 SE +/- 1.20, N = 3 SE +/- 1.45, N = 3 SE +/- 8.84, N = 3 9368 5650 4526 3928 3472 2654 2209 2198 1951 1863 1796 1477 1301 1197 1162 1125 1. (CXX) g++ options: -pipe -lpthread
TTSIOD 3D Renderer Phong Rendering With Soft-Shadow Mapping OpenBenchmarking.org FPS, More Is Better TTSIOD 3D Renderer 2.3b Phong Rendering With Soft-Shadow Mapping Socionext Developerbox Jetson TX1 jetson_nano Tinker Board ODROID-C2 AML-S905X-CC Le Potato Raspberry Pi 3 B+ Pine64 1GB Raspberry Pi 3 B ODROID-C1+ ALL-H3-CC H5 Raspberry Pi 2 B ALL-H3-CC H3 ALL-H3-CC H2+ 20 40 60 80 100 SE +/- 0.07, N = 3 SE +/- 0.07, N = 3 SE +/- 0.06, N = 3 SE +/- 0.02, N = 3 SE +/- 0.01, N = 3 SE +/- 0.02, N = 3 SE +/- 0.03, N = 3 SE +/- 0.05, N = 3 SE +/- 0.25, N = 4 SE +/- 0.06, N = 3 SE +/- 0.01, N = 3 SE +/- 0.02, N = 3 SE +/- 0.00, N = 3 SE +/- 0.01, N = 3 89.28 45.05 38.87 27.80 23.07 20.30 16.82 15.73 15.66 14.15 11.91 10.94 10.83 10.73 1. (CXX) g++ options: -O3 -fomit-frame-pointer -ffast-math -mtune=native -flto -lSDL -fopenmp -fwhole-program -lstdc++
x264 Performance / Cost - H.264 Video Encoding OpenBenchmarking.org Frames Per Second Per Dollar, More Is Better x264 2018-07-28 Performance / Cost - H.264 Video Encoding Tinker Board Raspberry Pi 3 B Raspberry Pi 3 B+ ODROID-C2 ALL-H3-CC H2+ Firefly ROC-RK3328-CC ALL-H3-CC H3 ODROID-C1+ Socionext Developerbox Jetson TX1 0.018 0.036 0.054 0.072 0.09 0.08 0.06 0.05 0.05 0.05 0.04 0.04 0.03 0.01 0.01 1. Tinker Board: $56.85 reported cost. 2. Raspberry Pi 3 B: $34.99 reported cost. 3. Raspberry Pi 3 B+: $39.78 reported cost. 4. ODROID-C2: $62.95 reported cost. 5. ALL-H3-CC H2+: $25.00 reported cost. 6. Firefly ROC-RK3328-CC: $50.00 reported cost. 7. ALL-H3-CC H3: $30.00 reported cost. 8. ODROID-C1+: $49.00 reported cost. 9. Socionext Developerbox: $1200.00 reported cost. 10. Jetson TX1: $476.99 reported cost.
C-Ray Performance / Cost - Total Time - 4K, 16 Rays Per Pixel OpenBenchmarking.org Seconds x Dollar, Fewer Is Better C-Ray 1.1 Performance / Cost - Total Time - 4K, 16 Rays Per Pixel Tinker Board AML-S905X-CC Le Potato Raspberry Pi 3 B Raspberry Pi 3 B+ Firefly ROC-RK3328-CC ODROID-C2 ALL-H3-CC H2+ ALL-H3-CC H5 ALL-H3-CC H3 ODROID-C1+ Jetson TX2 Jetson TX1 Socionext Developerbox 100K 200K 300K 400K 500K 59578.80 78975.00 82471.43 82503.72 88650.00 96754.15 104150.00 123520.00 124680.00 133280.00 371243.25 405918.49 469200.00 1. Tinker Board: $56.85 reported cost. 2. AML-S905X-CC Le Potato: $45.00 reported cost. 3. Raspberry Pi 3 B: $34.99 reported cost. 4. Raspberry Pi 3 B+: $39.78 reported cost. 5. Firefly ROC-RK3328-CC: $50.00 reported cost. 6. ODROID-C2: $62.95 reported cost. 7. ALL-H3-CC H2+: $25.00 reported cost. 8. ALL-H3-CC H5: $40.00 reported cost. 9. ALL-H3-CC H3: $30.00 reported cost. 10. ODROID-C1+: $49.00 reported cost. 11. Jetson TX2: $549.99 reported cost. 12. Jetson TX1: $476.99 reported cost. 13. Socionext Developerbox: $1200.00 reported cost.
PostgreSQL pgbench Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read Write OpenBenchmarking.org TPS Per Dollar, More Is Better PostgreSQL pgbench 10.3 Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read Write Tinker Board AML-S905X-CC Le Potato Raspberry Pi 3 B ODROID-C2 ODROID-C1+ Firefly ROC-RK3328-CC Raspberry Pi 3 B+ Socionext Developerbox Jetson TX2 Jetson TX1 5 10 15 20 25 20.09 13.40 11.69 11.42 7.04 5.26 3.62 3.47 3.26 2.56 1. Tinker Board: $56.85 reported cost. 2. AML-S905X-CC Le Potato: $45.00 reported cost. 3. Raspberry Pi 3 B: $34.99 reported cost. 4. ODROID-C2: $62.95 reported cost. 5. ODROID-C1+: $49.00 reported cost. 6. Firefly ROC-RK3328-CC: $50.00 reported cost. 7. Raspberry Pi 3 B+: $39.78 reported cost. 8. Socionext Developerbox: $1200.00 reported cost. 9. Jetson TX2: $549.99 reported cost. 10. Jetson TX1: $476.99 reported cost.
7-Zip Compression Performance / Cost - Compress Speed Test OpenBenchmarking.org MIPS Per Dollar, More Is Better 7-Zip Compression 16.02 Performance / Cost - Compress Speed Test Tinker Board Raspberry Pi 3 B AML-S905X-CC Le Potato ALL-H3-CC H2+ Raspberry Pi 3 B+ ALL-H3-CC H3 Firefly ROC-RK3328-CC ODROID-C2 ALL-H3-CC H5 ODROID-C1+ Jetson TX2 Jetson TX1 Socionext Developerbox 14 28 42 56 70 61.07 53.24 49.09 46.48 45.15 39.90 39.02 34.92 32.53 30.14 10.27 9.49 7.81 1. Tinker Board: $56.85 reported cost. 2. Raspberry Pi 3 B: $34.99 reported cost. 3. AML-S905X-CC Le Potato: $45.00 reported cost. 4. ALL-H3-CC H2+: $25.00 reported cost. 5. Raspberry Pi 3 B+: $39.78 reported cost. 6. ALL-H3-CC H3: $30.00 reported cost. 7. Firefly ROC-RK3328-CC: $50.00 reported cost. 8. ODROID-C2: $62.95 reported cost. 9. ALL-H3-CC H5: $40.00 reported cost. 10. ODROID-C1+: $49.00 reported cost. 11. Jetson TX2: $549.99 reported cost. 12. Jetson TX1: $476.99 reported cost. 13. Socionext Developerbox: $1200.00 reported cost.
PyBench Total For Average Test Times OpenBenchmarking.org Milliseconds, Fewer Is Better PyBench 2018-02-16 Total For Average Test Times Jetson TX2 Jetson TX1 jetson_nano Tinker Board ODROID-C2 Firefly ROC-RK3328-CC Banana Pi M3 Socionext Developerbox Pine64 1GB Raspberry Pi 3 B+ AML-S905X-CC Le Potato ODROID-C1+ Raspberry Pi 3 B ALL-H3-CC H3 ALL-H3-CC H2+ Raspberry Pi 2 B ALL-H3-CC H5 9K 18K 27K 36K 45K SE +/- 16.86, N = 3 SE +/- 21.11, N = 3 SE +/- 49.63, N = 3 SE +/- 16.41, N = 3 SE +/- 167.68, N = 3 SE +/- 46.73, N = 3 SE +/- 60.92, N = 3 SE +/- 13.74, N = 3 SE +/- 32.08, N = 3 SE +/- 85.92, N = 3 SE +/- 50.54, N = 3 SE +/- 37.03, N = 3 SE +/- 25.83, N = 3 SE +/- 35.56, N = 3 SE +/- 50.90, N = 3 SE +/- 51.49, N = 3 SE +/- 54.78, N = 3 5357 6348 7096 9256 12775 14030 15990 19386 20196 20923 22876 23773 24349 29389 29409 37907 40680
PHPBench PHP Benchmark Suite OpenBenchmarking.org Score, More Is Better PHPBench 0.8.1 PHP Benchmark Suite Jetson TX2 Jetson TX1 jetson_nano Tinker Board ODROID-C2 Firefly ROC-RK3328-CC Raspberry Pi 3 B+ Socionext Developerbox AML-S905X-CC Le Potato Pine64 1GB Raspberry Pi 3 B ODROID-C1+ ALL-H3-CC H3 ALL-H3-CC H2+ ALL-H3-CC H5 Raspberry Pi 2 B Banana Pi M3 30K 60K 90K 120K 150K SE +/- 871.71, N = 3 SE +/- 1075.34, N = 3 SE +/- 357.25, N = 3 SE +/- 222.05, N = 3 SE +/- 287.89, N = 3 SE +/- 238.66, N = 3 SE +/- 65.58, N = 3 SE +/- 16.44, N = 3 SE +/- 52.26, N = 3 SE +/- 17.90, N = 3 SE +/- 58.48, N = 3 SE +/- 82.63, N = 3 SE +/- 27.36, N = 3 SE +/- 26.01, N = 3 SE +/- 7.80, N = 3 SE +/- 141.51, N = 3 SE +/- 84.14, N = 3 133175 111979 101772 66398 59176 53802 40165 38922 37855 36988 34420 34052 26642 26622 21324 20836 18202
TTSIOD 3D Renderer Performance / Cost - Phong Rendering With Soft-Shadow Mapping OpenBenchmarking.org FPS Per Dollar, More Is Better TTSIOD 3D Renderer 2.3b Performance / Cost - Phong Rendering With Soft-Shadow Mapping Tinker Board Raspberry Pi 3 B AML-S905X-CC Le Potato ALL-H3-CC H2+ Raspberry Pi 3 B+ ODROID-C2 ALL-H3-CC H3 ALL-H3-CC H5 ODROID-C1+ Jetson TX1 Socionext Developerbox 0.1103 0.2206 0.3309 0.4412 0.5515 0.49 0.45 0.45 0.43 0.42 0.37 0.36 0.30 0.29 0.09 0.07 1. Tinker Board: $56.85 reported cost. 2. Raspberry Pi 3 B: $34.99 reported cost. 3. AML-S905X-CC Le Potato: $45.00 reported cost. 4. ALL-H3-CC H2+: $25.00 reported cost. 5. Raspberry Pi 3 B+: $39.78 reported cost. 6. ODROID-C2: $62.95 reported cost. 7. ALL-H3-CC H3: $30.00 reported cost. 8. ALL-H3-CC H5: $40.00 reported cost. 9. ODROID-C1+: $49.00 reported cost. 10. Jetson TX1: $476.99 reported cost. 11. Socionext Developerbox: $1200.00 reported cost.
FLAC Audio Encoding Performance / Cost - WAV To FLAC OpenBenchmarking.org Seconds x Dollar, Fewer Is Better FLAC Audio Encoding 1.3.2 Performance / Cost - WAV To FLAC Tinker Board Raspberry Pi 3 B+ ALL-H3-CC H2+ Raspberry Pi 3 B Firefly ROC-RK3328-CC AML-S905X-CC Le Potato ALL-H3-CC H3 ODROID-C2 ODROID-C1+ ALL-H3-CC H5 Jetson TX2 Jetson TX1 Socionext Developerbox 100K 200K 300K 400K 500K 6938.54 13368.86 13431.75 13544.28 14668.50 15058.35 16122.60 16573.48 16867.27 22655.20 35831.85 37615.43 468912.00 1. Tinker Board: $56.85 reported cost. 2. Raspberry Pi 3 B+: $39.78 reported cost. 3. ALL-H3-CC H2+: $25.00 reported cost. 4. Raspberry Pi 3 B: $34.99 reported cost. 5. Firefly ROC-RK3328-CC: $50.00 reported cost. 6. AML-S905X-CC Le Potato: $45.00 reported cost. 7. ALL-H3-CC H3: $30.00 reported cost. 8. ODROID-C2: $62.95 reported cost. 9. ODROID-C1+: $49.00 reported cost. 10. ALL-H3-CC H5: $40.00 reported cost. 11. Jetson TX2: $549.99 reported cost. 12. Jetson TX1: $476.99 reported cost. 13. Socionext Developerbox: $1200.00 reported cost.
LAME MP3 Encoding Performance / Cost - WAV To MP3 OpenBenchmarking.org Seconds x Dollar, Fewer Is Better LAME MP3 Encoding 3.100 Performance / Cost - WAV To MP3 Tinker Board Raspberry Pi 3 B+ Raspberry Pi 3 B ALL-H3-CC H2+ AML-S905X-CC Le Potato Firefly ROC-RK3328-CC ALL-H3-CC H3 ODROID-C1+ ODROID-C2 ALL-H3-CC H5 Jetson TX2 Jetson TX1 Socionext Developerbox 100K 200K 300K 400K 500K 8276.79 12012.76 12339.57 13397.50 13543.20 14810.00 16098.60 16219.49 16795.06 20740.40 52749.54 53966.65 487668.00 1. Tinker Board: $56.85 reported cost. 2. Raspberry Pi 3 B+: $39.78 reported cost. 3. Raspberry Pi 3 B: $34.99 reported cost. 4. ALL-H3-CC H2+: $25.00 reported cost. 5. AML-S905X-CC Le Potato: $45.00 reported cost. 6. Firefly ROC-RK3328-CC: $50.00 reported cost. 7. ALL-H3-CC H3: $30.00 reported cost. 8. ODROID-C1+: $49.00 reported cost. 9. ODROID-C2: $62.95 reported cost. 10. ALL-H3-CC H5: $40.00 reported cost. 11. Jetson TX2: $549.99 reported cost. 12. Jetson TX1: $476.99 reported cost. 13. Socionext Developerbox: $1200.00 reported cost.
LAME MP3 Encoding WAV To MP3 OpenBenchmarking.org Seconds, Fewer Is Better LAME MP3 Encoding 3.100 WAV To MP3 Jetson TX2 Jetson TX1 jetson_nano Tinker Board Banana Pi M3 ODROID-C2 Firefly ROC-RK3328-CC AML-S905X-CC Le Potato Raspberry Pi 3 B+ ODROID-C1+ Pine64 1GB Raspberry Pi 3 B Socionext Developerbox Raspberry Pi 2 B ALL-H3-CC H5 ALL-H3-CC H2+ ALL-H3-CC H3 120 240 360 480 600 SE +/- 0.11, N = 3 SE +/- 0.15, N = 3 SE +/- 0.22, N = 3 SE +/- 0.06, N = 3 SE +/- 2.53, N = 3 SE +/- 2.55, N = 3 SE +/- 0.24, N = 3 SE +/- 0.09, N = 3 SE +/- 0.49, N = 3 SE +/- 0.99, N = 3 SE +/- 0.11, N = 3 SE +/- 0.10, N = 3 SE +/- 0.07, N = 3 SE +/- 0.40, N = 3 SE +/- 0.09, N = 3 SE +/- 0.29, N = 3 SE +/- 0.28, N = 3 95.91 113.14 143.52 145.59 266.35 266.80 296.20 300.96 301.98 331.01 350.19 352.66 406.39 514.11 518.51 535.90 536.62 -lncurses 1. (CC) gcc options: -lm
Perl Benchmarks Test: Pod2html OpenBenchmarking.org Seconds, Fewer Is Better Perl Benchmarks Test: Pod2html Jetson TX2 Jetson TX1 Tinker Board jetson_nano Raspberry Pi 3 B+ ODROID-C2 Raspberry Pi 3 B Firefly ROC-RK3328-CC Pine64 1GB AML-S905X-CC Le Potato Socionext Developerbox ODROID-C1+ ALL-H3-CC H3 ALL-H3-CC H2+ Raspberry Pi 2 B ALL-H3-CC H5 Banana Pi M3 0.5842 1.1684 1.7526 2.3368 2.921 SE +/- 0.00383151, N = 3 SE +/- 0.00322779, N = 3 SE +/- 0.00065111, N = 3 SE +/- 0.00391261, N = 3 SE +/- 0.01837187, N = 4 SE +/- 0.02171209, N = 3 SE +/- 0.00473476, N = 3 SE +/- 0.01051258, N = 3 SE +/- 0.00496104, N = 3 SE +/- 0.00368669, N = 3 SE +/- 0.00683757, N = 3 SE +/- 0.06022970, N = 6 SE +/- 0.00913039, N = 3 SE +/- 0.00906752, N = 3 SE +/- 0.04245993, N = 9 SE +/- 0.01160841, N = 3 SE +/- 0.02860806, N = 3 0.48746904 0.60071034 0.69415680 0.72673013 1.11833973 1.11893361 1.29447902 1.31366123 1.40449621 1.49377750 1.57088061 1.73162418 2.26615629 2.27366223 2.46504575 2.57579869 2.59638113
Tinymembench Standard Memcpy OpenBenchmarking.org MB/s, More Is Better Tinymembench 2018-05-28 Standard Memcpy Jetson TX1 Jetson TX2 jetson_nano AML-S905X-CC Le Potato ODROID-C2 Firefly ROC-RK3328-CC Socionext Developerbox Tinker Board Pine64 1GB ALL-H3-CC H5 Raspberry Pi 3 B Raspberry Pi 3 B+ Raspberry Pi 2 B ODROID-C1+ ALL-H3-CC H3 ALL-H3-CC H2+ Banana Pi M3 800 1600 2400 3200 4000 3862 3798 3455 2095 1688 1566 1543 1502 1377 1339 1297 1288 956 928 912 827 738 1. (CC) gcc options: -O2 -lm
AOBench Size: 2048 x 2048 - Total Time OpenBenchmarking.org Seconds, Fewer Is Better AOBench Size: 2048 x 2048 - Total Time Jetson TX2 Jetson TX1 jetson_nano Tinker Board ODROID-C2 AML-S905X-CC Le Potato Firefly ROC-RK3328-CC Raspberry Pi 3 B+ Raspberry Pi 3 B Pine64 1GB Socionext Developerbox ODROID-C1+ Banana Pi M3 ALL-H3-CC H5 Raspberry Pi 2 B ALL-H3-CC H2+ ALL-H3-CC H3 150 300 450 600 750 SE +/- 0.07, N = 3 SE +/- 0.11, N = 3 SE +/- 0.14, N = 3 SE +/- 0.05, N = 3 SE +/- 0.05, N = 3 SE +/- 0.12, N = 3 SE +/- 0.18, N = 3 SE +/- 3.87, N = 6 SE +/- 0.44, N = 3 SE +/- 0.24, N = 3 SE +/- 0.28, N = 3 SE +/- 2.17, N = 3 SE +/- 5.31, N = 3 SE +/- 1.23, N = 3 SE +/- 0.55, N = 3 SE +/- 0.03, N = 3 SE +/- 0.21, N = 3 134 165 189 192 260 282 289 290 333 352 400 457 461 491 667 698 700 1. (CC) gcc options: -lm -O3
Primesieve Performance / Cost - 1e12 Prime Number Generation OpenBenchmarking.org Seconds x Dollar, Fewer Is Better Primesieve 7.1 Performance / Cost - 1e12 Prime Number Generation ODROID-C2 AML-S905X-CC Le Potato Raspberry Pi 3 B+ Firefly ROC-RK3328-CC ALL-H3-CC H2+ Raspberry Pi 3 B ALL-H3-CC H3 ALL-H3-CC H5 ODROID-C1+ Socionext Developerbox Jetson TX1 40K 80K 120K 160K 200K 37707.05 40095.00 44275.14 46700.00 49375.00 53989.57 58200.00 64920.00 77959.00 159600.00 191272.99 1. ODROID-C2: $62.95 reported cost. 2. AML-S905X-CC Le Potato: $45.00 reported cost. 3. Raspberry Pi 3 B+: $39.78 reported cost. 4. Firefly ROC-RK3328-CC: $50.00 reported cost. 5. ALL-H3-CC H2+: $25.00 reported cost. 6. Raspberry Pi 3 B: $34.99 reported cost. 7. ALL-H3-CC H3: $30.00 reported cost. 8. ALL-H3-CC H5: $40.00 reported cost. 9. ODROID-C1+: $49.00 reported cost. 10. Socionext Developerbox: $1200.00 reported cost. 11. Jetson TX1: $476.99 reported cost.
Perl Benchmarks Performance / Cost - Test: Pod2html OpenBenchmarking.org Seconds x Dollar, Fewer Is Better Perl Benchmarks Performance / Cost - Test: Pod2html Tinker Board Raspberry Pi 3 B+ Raspberry Pi 3 B ALL-H3-CC H2+ Firefly ROC-RK3328-CC AML-S905X-CC Le Potato ALL-H3-CC H3 ODROID-C2 ODROID-C1+ ALL-H3-CC H5 Jetson TX2 Jetson TX1 Socionext Developerbox 400 800 1200 1600 2000 39.46 44.49 45.29 56.84 65.68 67.22 67.98 70.44 84.85 103.03 268.10 286.53 1885.06 1. Tinker Board: $56.85 reported cost. 2. Raspberry Pi 3 B+: $39.78 reported cost. 3. Raspberry Pi 3 B: $34.99 reported cost. 4. ALL-H3-CC H2+: $25.00 reported cost. 5. Firefly ROC-RK3328-CC: $50.00 reported cost. 6. AML-S905X-CC Le Potato: $45.00 reported cost. 7. ALL-H3-CC H3: $30.00 reported cost. 8. ODROID-C2: $62.95 reported cost. 9. ODROID-C1+: $49.00 reported cost. 10. ALL-H3-CC H5: $40.00 reported cost. 11. Jetson TX2: $549.99 reported cost. 12. Jetson TX1: $476.99 reported cost. 13. Socionext Developerbox: $1200.00 reported cost.
PyBench Performance / Cost - Total For Average Test Times OpenBenchmarking.org Milliseconds x Dollar, Fewer Is Better PyBench 2018-02-16 Performance / Cost - Total For Average Test Times Tinker Board Firefly ROC-RK3328-CC ALL-H3-CC H2+ ODROID-C2 Raspberry Pi 3 B+ Raspberry Pi 3 B ALL-H3-CC H3 AML-S905X-CC Le Potato ODROID-C1+ ALL-H3-CC H5 Jetson TX2 Jetson TX1 Socionext Developerbox 5M 10M 15M 20M 25M 526203.60 701500.00 735225.00 804186.25 832316.94 851971.51 881670.00 1029420.00 1164877.00 1627200.00 2946296.43 3027932.52 23263200.00 1. Tinker Board: $56.85 reported cost. 2. Firefly ROC-RK3328-CC: $50.00 reported cost. 3. ALL-H3-CC H2+: $25.00 reported cost. 4. ODROID-C2: $62.95 reported cost. 5. Raspberry Pi 3 B+: $39.78 reported cost. 6. Raspberry Pi 3 B: $34.99 reported cost. 7. ALL-H3-CC H3: $30.00 reported cost. 8. AML-S905X-CC Le Potato: $45.00 reported cost. 9. ODROID-C1+: $49.00 reported cost. 10. ALL-H3-CC H5: $40.00 reported cost. 11. Jetson TX2: $549.99 reported cost. 12. Jetson TX1: $476.99 reported cost. 13. Socionext Developerbox: $1200.00 reported cost.
AOBench Performance / Cost - Size: 2048 x 2048 - Total Time OpenBenchmarking.org Seconds x Dollar, Fewer Is Better AOBench Performance / Cost - Size: 2048 x 2048 - Total Time Tinker Board Raspberry Pi 3 B+ Raspberry Pi 3 B AML-S905X-CC Le Potato Firefly ROC-RK3328-CC ODROID-C2 ALL-H3-CC H2+ ALL-H3-CC H5 ALL-H3-CC H3 ODROID-C1+ Jetson TX2 Jetson TX1 Socionext Developerbox 100K 200K 300K 400K 500K 10915.20 11536.20 11651.67 12690.00 14450.00 16367.00 17450.00 19640.00 21000.00 22393.00 73698.66 78703.35 480000.00 1. Tinker Board: $56.85 reported cost. 2. Raspberry Pi 3 B+: $39.78 reported cost. 3. Raspberry Pi 3 B: $34.99 reported cost. 4. AML-S905X-CC Le Potato: $45.00 reported cost. 5. Firefly ROC-RK3328-CC: $50.00 reported cost. 6. ODROID-C2: $62.95 reported cost. 7. ALL-H3-CC H2+: $25.00 reported cost. 8. ALL-H3-CC H5: $40.00 reported cost. 9. ALL-H3-CC H3: $30.00 reported cost. 10. ODROID-C1+: $49.00 reported cost. 11. Jetson TX2: $549.99 reported cost. 12. Jetson TX1: $476.99 reported cost. 13. Socionext Developerbox: $1200.00 reported cost.
Scikit-Learn Performance / Cost - OpenBenchmarking.org Seconds x Dollar, Fewer Is Better Scikit-Learn 0.17.1 Performance / Cost - Tinker Board Raspberry Pi 3 B Raspberry Pi 3 B+ Firefly ROC-RK3328-CC ODROID-C2 AML-S905X-CC Le Potato ALL-H3-CC H5 ALL-H3-CC H3 ODROID-C1+ Jetson TX1 Socionext Developerbox 200K 400K 600K 800K 1000K 26946.90 29531.56 31227.30 32500.00 41798.80 42930.00 60600.00 67380.00 79919.00 207013.66 1078800.00 1. Tinker Board: $56.85 reported cost. 2. Raspberry Pi 3 B: $34.99 reported cost. 3. Raspberry Pi 3 B+: $39.78 reported cost. 4. Firefly ROC-RK3328-CC: $50.00 reported cost. 5. ODROID-C2: $62.95 reported cost. 6. AML-S905X-CC Le Potato: $45.00 reported cost. 7. ALL-H3-CC H5: $40.00 reported cost. 8. ALL-H3-CC H3: $30.00 reported cost. 9. ODROID-C1+: $49.00 reported cost. 10. Jetson TX1: $476.99 reported cost. 11. Socionext Developerbox: $1200.00 reported cost.
Hierarchical INTegration Performance / Cost - Test: FLOAT OpenBenchmarking.org QUIPs Per Dollar, More Is Better Hierarchical INTegration 1.0 Performance / Cost - Test: FLOAT Raspberry Pi 3 B+ Raspberry Pi 3 B Tinker Board ALL-H3-CC H2+ AML-S905X-CC Le Potato Firefly ROC-RK3328-CC ALL-H3-CC H3 ODROID-C1+ ODROID-C2 ALL-H3-CC H5 Jetson TX2 Jetson TX1 Socionext Developerbox 300K 600K 900K 1200K 1500K 1456943.01 1429240.78 1420498.24 1385515.20 1313808.62 1222592.24 1154677.77 1137344.51 1075031.95 850093.00 189072.69 185289.66 36791.98 1. Raspberry Pi 3 B+: $39.78 reported cost. 2. Raspberry Pi 3 B: $34.99 reported cost. 3. Tinker Board: $56.85 reported cost. 4. ALL-H3-CC H2+: $25.00 reported cost. 5. AML-S905X-CC Le Potato: $45.00 reported cost. 6. Firefly ROC-RK3328-CC: $50.00 reported cost. 7. ALL-H3-CC H3: $30.00 reported cost. 8. ODROID-C1+: $49.00 reported cost. 9. ODROID-C2: $62.95 reported cost. 10. ALL-H3-CC H5: $40.00 reported cost. 11. Jetson TX2: $549.99 reported cost. 12. Jetson TX1: $476.99 reported cost. 13. Socionext Developerbox: $1200.00 reported cost.
Git Performance / Cost - Time To Complete Common Git Commands OpenBenchmarking.org Seconds x Dollar, Fewer Is Better Git Performance / Cost - Time To Complete Common Git Commands Tinker Board Raspberry Pi 3 B Firefly ROC-RK3328-CC Raspberry Pi 3 B+ ALL-H3-CC H2+ AML-S905X-CC Le Potato ODROID-C2 ALL-H3-CC H3 ALL-H3-CC H5 ODROID-C1+ Jetson TX2 Jetson TX1 Socionext Developerbox 12K 24K 36K 48K 60K 1481.51 2001.08 2002.00 2062.20 2295.75 2448.45 2454.42 2621.10 3087.60 3392.27 9663.32 11285.58 55644.00 1. Tinker Board: $56.85 reported cost. 2. Raspberry Pi 3 B: $34.99 reported cost. 3. Firefly ROC-RK3328-CC: $50.00 reported cost. 4. Raspberry Pi 3 B+: $39.78 reported cost. 5. ALL-H3-CC H2+: $25.00 reported cost. 6. AML-S905X-CC Le Potato: $45.00 reported cost. 7. ODROID-C2: $62.95 reported cost. 8. ALL-H3-CC H3: $30.00 reported cost. 9. ALL-H3-CC H5: $40.00 reported cost. 10. ODROID-C1+: $49.00 reported cost. 11. Jetson TX2: $549.99 reported cost. 12. Jetson TX1: $476.99 reported cost. 13. Socionext Developerbox: $1200.00 reported cost.
Tinymembench Performance / Cost - Standard Memcpy OpenBenchmarking.org MB/s Per Dollar, More Is Better Tinymembench 2018-05-28 Performance / Cost - Standard Memcpy AML-S905X-CC Le Potato Raspberry Pi 3 B ALL-H3-CC H5 ALL-H3-CC H2+ Raspberry Pi 3 B+ Firefly ROC-RK3328-CC ALL-H3-CC H3 ODROID-C2 Tinker Board ODROID-C1+ Jetson TX1 Jetson TX2 Socionext Developerbox 11 22 33 44 55 46.56 37.07 33.48 33.08 32.38 31.32 30.40 26.81 26.42 18.94 8.10 6.91 1.29 1. AML-S905X-CC Le Potato: $45.00 reported cost. 2. Raspberry Pi 3 B: $34.99 reported cost. 3. ALL-H3-CC H5: $40.00 reported cost. 4. ALL-H3-CC H2+: $25.00 reported cost. 5. Raspberry Pi 3 B+: $39.78 reported cost. 6. Firefly ROC-RK3328-CC: $50.00 reported cost. 7. ALL-H3-CC H3: $30.00 reported cost. 8. ODROID-C2: $62.95 reported cost. 9. Tinker Board: $56.85 reported cost. 10. ODROID-C1+: $49.00 reported cost. 11. Jetson TX1: $476.99 reported cost. 12. Jetson TX2: $549.99 reported cost. 13. Socionext Developerbox: $1200.00 reported cost.
PHPBench Performance / Cost - PHP Benchmark Suite OpenBenchmarking.org Score Per Dollar, More Is Better PHPBench 0.8.1 Performance / Cost - PHP Benchmark Suite Tinker Board Firefly ROC-RK3328-CC ALL-H3-CC H2+ Raspberry Pi 3 B+ Raspberry Pi 3 B ODROID-C2 ALL-H3-CC H3 AML-S905X-CC Le Potato ODROID-C1+ ALL-H3-CC H5 Jetson TX2 Jetson TX1 Socionext Developerbox 300 600 900 1200 1500 1167.95 1076.04 1064.88 1009.68 983.71 940.05 888.07 841.22 694.94 533.10 242.14 234.76 32.44 1. Tinker Board: $56.85 reported cost. 2. Firefly ROC-RK3328-CC: $50.00 reported cost. 3. ALL-H3-CC H2+: $25.00 reported cost. 4. Raspberry Pi 3 B+: $39.78 reported cost. 5. Raspberry Pi 3 B: $34.99 reported cost. 6. ODROID-C2: $62.95 reported cost. 7. ALL-H3-CC H3: $30.00 reported cost. 8. AML-S905X-CC Le Potato: $45.00 reported cost. 9. ODROID-C1+: $49.00 reported cost. 10. ALL-H3-CC H5: $40.00 reported cost. 11. Jetson TX2: $549.99 reported cost. 12. Jetson TX1: $476.99 reported cost. 13. Socionext Developerbox: $1200.00 reported cost.
Zstd Compression Performance / Cost - Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19 OpenBenchmarking.org Seconds x Dollar, Fewer Is Better Zstd Compression 1.3.4 Performance / Cost - Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19 Tinker Board Raspberry Pi 3 B Raspberry Pi 3 B+ ALL-H3-CC H2+ AML-S905X-CC Le Potato ALL-H3-CC H3 Firefly ROC-RK3328-CC ODROID-C1+ ALL-H3-CC H5 ODROID-C2 Jetson TX1 Jetson TX2 Socionext Developerbox 200K 400K 600K 800K 1000K 32575.05 32680.66 34489.26 35175.00 36360.00 41490.00 42400.00 47922.00 48760.00 51744.90 210352.59 250245.45 1117200.00 1. Tinker Board: $56.85 reported cost. 2. Raspberry Pi 3 B: $34.99 reported cost. 3. Raspberry Pi 3 B+: $39.78 reported cost. 4. ALL-H3-CC H2+: $25.00 reported cost. 5. AML-S905X-CC Le Potato: $45.00 reported cost. 6. ALL-H3-CC H3: $30.00 reported cost. 7. Firefly ROC-RK3328-CC: $50.00 reported cost. 8. ODROID-C1+: $49.00 reported cost. 9. ALL-H3-CC H5: $40.00 reported cost. 10. ODROID-C2: $62.95 reported cost. 11. Jetson TX1: $476.99 reported cost. 12. Jetson TX2: $549.99 reported cost. 13. Socionext Developerbox: $1200.00 reported cost.
Perl Benchmarks Performance / Cost - Test: Interpreter OpenBenchmarking.org Seconds x Dollar, Fewer Is Better Perl Benchmarks Performance / Cost - Test: Interpreter Tinker Board ALL-H3-CC H2+ Firefly ROC-RK3328-CC Raspberry Pi 3 B ALL-H3-CC H3 Raspberry Pi 3 B+ AML-S905X-CC Le Potato ODROID-C2 ODROID-C1+ ALL-H3-CC H5 Jetson TX1 Jetson TX2 Socionext Developerbox 2 4 6 8 10 0.24 0.25 0.26 0.29 0.30 0.30 0.35 0.35 0.40 0.42 1.13 5.43 7.91 1. Tinker Board: $56.85 reported cost. 2. ALL-H3-CC H2+: $25.00 reported cost. 3. Firefly ROC-RK3328-CC: $50.00 reported cost. 4. Raspberry Pi 3 B: $34.99 reported cost. 5. ALL-H3-CC H3: $30.00 reported cost. 6. Raspberry Pi 3 B+: $39.78 reported cost. 7. AML-S905X-CC Le Potato: $45.00 reported cost. 8. ODROID-C2: $62.95 reported cost. 9. ODROID-C1+: $49.00 reported cost. 10. ALL-H3-CC H5: $40.00 reported cost. 11. Jetson TX1: $476.99 reported cost. 12. Jetson TX2: $549.99 reported cost. 13. Socionext Developerbox: $1200.00 reported cost.
Redis Performance / Cost - Test: GET OpenBenchmarking.org Requests Per Second Per Dollar, More Is Better Redis 4.0.8 Performance / Cost - Test: GET Raspberry Pi 3 B Raspberry Pi 3 B+ Tinker Board Firefly ROC-RK3328-CC ODROID-C2 ODROID-C1+ AML-S905X-CC Le Potato ALL-H3-CC H5 Jetson TX2 Jetson TX1 Socionext Developerbox 1300 2600 3900 5200 6500 6089.37 6052.31 5740.56 5312.16 4313.69 3415.22 2287.84 1369.48 1201.50 1016.14 196.43 1. Raspberry Pi 3 B: $34.99 reported cost. 2. Raspberry Pi 3 B+: $39.78 reported cost. 3. Tinker Board: $56.85 reported cost. 4. Firefly ROC-RK3328-CC: $50.00 reported cost. 5. ODROID-C2: $62.95 reported cost. 6. ODROID-C1+: $49.00 reported cost. 7. AML-S905X-CC Le Potato: $45.00 reported cost. 8. ALL-H3-CC H5: $40.00 reported cost. 9. Jetson TX2: $549.99 reported cost. 10. Jetson TX1: $476.99 reported cost. 11. Socionext Developerbox: $1200.00 reported cost.
Zstd Compression Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19 OpenBenchmarking.org Seconds, Fewer Is Better Zstd Compression 1.3.4 Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19 jetson_nano Jetson TX1 Jetson TX2 Tinker Board AML-S905X-CC Le Potato ODROID-C2 Firefly ROC-RK3328-CC Raspberry Pi 3 B+ Socionext Developerbox Raspberry Pi 3 B ODROID-C1+ Pine64 1GB Banana Pi M3 ALL-H3-CC H5 Raspberry Pi 2 B ALL-H3-CC H3 ALL-H3-CC H2+ 300 600 900 1200 1500 SE +/- 0.60, N = 3 SE +/- 1.94, N = 3 SE +/- 0.02, N = 3 SE +/- 0.74, N = 3 SE +/- 1.29, N = 3 SE +/- 1.06, N = 3 SE +/- 2.33, N = 3 SE +/- 0.57, N = 3 SE +/- 2.72, N = 3 SE +/- 0.31, N = 3 SE +/- 6.01, N = 3 SE +/- 0.98, N = 3 SE +/- 3.00, N = 3 SE +/- 1.72, N = 3 SE +/- 6.35, N = 3 SE +/- 0.40, N = 3 SE +/- 1.50, N = 3 407 441 455 573 808 822 848 867 931 934 978 1034 1069 1219 1315 1383 1407 -llzma -llz4 -llzma -llzma -llzma -llzma -llzma -llzma -llzma -llzma -llzma -llzma -llzma -llzma -llzma -llzma -llzma 1. (CC) gcc options: -O3 -pthread -lz
Hierarchical INTegration Test: FLOAT OpenBenchmarking.org QUIPs, More Is Better Hierarchical INTegration 1.0 Test: FLOAT Jetson TX2 Jetson TX1 Tinker Board Banana Pi M3 ODROID-C2 jetson_nano Firefly ROC-RK3328-CC AML-S905X-CC Le Potato Raspberry Pi 3 B+ ODROID-C1+ Pine64 1GB Raspberry Pi 3 B Socionext Developerbox Raspberry Pi 2 B ALL-H3-CC H3 ALL-H3-CC H2+ ALL-H3-CC H5 20M 40M 60M 80M 100M SE +/- 187708.64, N = 3 SE +/- 466387.18, N = 3 SE +/- 3664.18, N = 3 SE +/- 132627.22, N = 3 SE +/- 19085.92, N = 3 SE +/- 79569.68, N = 3 SE +/- 19531.90, N = 3 SE +/- 7375.88, N = 3 SE +/- 271590.74, N = 3 SE +/- 359364.97, N = 3 SE +/- 27122.74, N = 3 SE +/- 73922.97, N = 3 SE +/- 3286.77, N = 3 SE +/- 113633.28, N = 3 SE +/- 1696.71, N = 3 SE +/- 1621.71, N = 3 SE +/- 9829.94, N = 3 103988087 88381313 80755325 67935371 67673261 66921969 61129612 59121388 57957193 55729881 50185204 50009135 44150376 35952660 34640333 34637880 34003720 1. (CC) gcc options: -O3 -march=native -lm
Redis Performance / Cost - Test: SET OpenBenchmarking.org Requests Per Second Per Dollar, More Is Better Redis 4.0.8 Performance / Cost - Test: SET Tinker Board Firefly ROC-RK3328-CC Raspberry Pi 3 B+ Raspberry Pi 3 B ODROID-C2 ODROID-C1+ AML-S905X-CC Le Potato ALL-H3-CC H5 Jetson TX2 Jetson TX1 Socionext Developerbox 800 1600 2400 3200 4000 3847.79 3792.46 3779.21 3765.76 3091.04 2052.27 1589.44 948.18 785.97 699.25 133.38 1. Tinker Board: $56.85 reported cost. 2. Firefly ROC-RK3328-CC: $50.00 reported cost. 3. Raspberry Pi 3 B+: $39.78 reported cost. 4. Raspberry Pi 3 B: $34.99 reported cost. 5. ODROID-C2: $62.95 reported cost. 6. ODROID-C1+: $49.00 reported cost. 7. AML-S905X-CC Le Potato: $45.00 reported cost. 8. ALL-H3-CC H5: $40.00 reported cost. 9. Jetson TX2: $549.99 reported cost. 10. Jetson TX1: $476.99 reported cost. 11. Socionext Developerbox: $1200.00 reported cost.
Scikit-Learn OpenBenchmarking.org Seconds, Fewer Is Better Scikit-Learn 0.17.1 jetson_nano Banana Pi M3 Jetson TX1 Tinker Board Firefly ROC-RK3328-CC ODROID-C2 Raspberry Pi 3 B+ Raspberry Pi 3 B Pine64 1GB Socionext Developerbox AML-S905X-CC Le Potato ALL-H3-CC H5 ODROID-C1+ ALL-H3-CC H3 Raspberry Pi 2 B 500 1000 1500 2000 2500 SE +/- 0.91, N = 3 SE +/- 0.29, N = 3 SE +/- 1.69, N = 3 SE +/- 1.43, N = 3 SE +/- 1.06, N = 3 SE +/- 1.01, N = 3 SE +/- 1.26, N = 3 SE +/- 0.80, N = 3 SE +/- 0.51, N = 3 SE +/- 0.74, N = 3 SE +/- 1.54, N = 3 SE +/- 1.25, N = 3 SE +/- 2.27, N = 3 SE +/- 1.01, N = 3 SE +/- 7.83, N = 3 151 221 434 474 650 664 785 844 853 899 954 1515 1631 2246 2328
Primesieve 1e12 Prime Number Generation OpenBenchmarking.org Seconds, Fewer Is Better Primesieve 7.1 1e12 Prime Number Generation Socionext Developerbox Jetson TX1 jetson_nano ODROID-C2 Banana Pi M3 AML-S905X-CC Le Potato Firefly ROC-RK3328-CC Pine64 1GB Raspberry Pi 3 B+ Raspberry Pi 3 B ODROID-C1+ ALL-H3-CC H5 Raspberry Pi 2 B ALL-H3-CC H3 ALL-H3-CC H2+ 400 800 1200 1600 2000 SE +/- 0.13, N = 3 SE +/- 15.34, N = 9 SE +/- 13.78, N = 9 SE +/- 3.10, N = 3 SE +/- 13.52, N = 5 SE +/- 4.98, N = 3 SE +/- 15.71, N = 3 SE +/- 14.59, N = 5 SE +/- 11.17, N = 3 SE +/- 21.17, N = 5 SE +/- 31.20, N = 3 SE +/- 19.70, N = 9 SE +/- 5.62, N = 3 SE +/- 15.03, N = 3 SE +/- 21.10, N = 3 133 401 488 599 876 891 934 943 1113 1543 1591 1623 1897 1940 1975 1. (CXX) g++ options: -O3 -lpthread
Perl Benchmarks Test: Interpreter OpenBenchmarking.org Seconds, Fewer Is Better Perl Benchmarks Test: Interpreter Jetson TX1 Tinker Board jetson_nano Firefly ROC-RK3328-CC ODROID-C2 Socionext Developerbox Raspberry Pi 3 B+ AML-S905X-CC Le Potato ODROID-C1+ Raspberry Pi 3 B Jetson TX2 ALL-H3-CC H3 ALL-H3-CC H2+ Pine64 1GB ALL-H3-CC H5 Raspberry Pi 2 B Banana Pi M3 0.0078 0.0156 0.0234 0.0312 0.039 SE +/- 0.00001414, N = 3 SE +/- 0.00014579, N = 12 SE +/- 0.00001215, N = 3 SE +/- 0.00002586, N = 3 SE +/- 0.00001616, N = 3 SE +/- 0.00001488, N = 3 SE +/- 0.00021301, N = 12 SE +/- 0.00008543, N = 3 SE +/- 0.00000666, N = 3 SE +/- 0.00021052, N = 11 SE +/- 0.00012375, N = 3 SE +/- 0.00003080, N = 3 SE +/- 0.00001117, N = 3 SE +/- 0.00011141, N = 3 SE +/- 0.00001343, N = 3 SE +/- 0.00021832, N = 3 SE +/- 0.00011530, N = 3 0.00235869 0.00428081 0.00453442 0.00514761 0.00551193 0.00658840 0.00742901 0.00776080 0.00814231 0.00842084 0.00987031 0.01010965 0.01012165 0.01025786 0.01057718 0.01345155 0.03473245
Tinymembench Standard Memset OpenBenchmarking.org MB/s, More Is Better Tinymembench 2018-05-28 Standard Memset Jetson TX2 Jetson TX1 jetson_nano Socionext Developerbox Firefly ROC-RK3328-CC AML-S905X-CC Le Potato Tinker Board ODROID-C2 Pine64 1GB ODROID-C1+ ALL-H3-CC H3 ALL-H3-CC H2+ ALL-H3-CC H5 Raspberry Pi 3 B+ Raspberry Pi 3 B Raspberry Pi 2 B Banana Pi M3 3K 6K 9K 12K 15K 13913 10374 8468 7359 7336 5535 4192 3604 3093 2881 2278 2277 2193 1871 1738 1177 1064 1. (CC) gcc options: -O2 -lm
Redis Test: GET OpenBenchmarking.org Requests Per Second, More Is Better Redis 4.0.8 Test: GET Jetson TX2 jetson_nano Jetson TX1 Tinker Board ODROID-C2 Firefly ROC-RK3328-CC Pine64 1GB Raspberry Pi 3 B+ Socionext Developerbox Raspberry Pi 3 B ODROID-C1+ Banana Pi M3 Raspberry Pi 2 B AML-S905X-CC Le Potato ALL-H3-CC H5 140K 280K 420K 560K 700K SE +/- 2540.60, N = 3 SE +/- 6398.04, N = 3 SE +/- 2915.59, N = 3 SE +/- 4435.65, N = 3 SE +/- 777.10, N = 3 SE +/- 3573.20, N = 6 SE +/- 3541.46, N = 3 SE +/- 1090.67, N = 3 SE +/- 2599.96, N = 3 SE +/- 1229.44, N = 3 SE +/- 1992.94, N = 12 SE +/- 1833.04, N = 3 SE +/- 1911.33, N = 3 SE +/- 263.42, N = 3 SE +/- 336.63, N = 3 660813 563104 484688 326351 271547 265608 255546 240761 235721 213067 167346 124215 113111 102953 54779 1. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread
Redis Test: SET OpenBenchmarking.org Requests Per Second, More Is Better Redis 4.0.8 Test: SET Jetson TX2 jetson_nano Jetson TX1 Tinker Board ODROID-C2 Firefly ROC-RK3328-CC Socionext Developerbox Pine64 1GB Raspberry Pi 3 B+ Raspberry Pi 3 B ODROID-C1+ Banana Pi M3 AML-S905X-CC Le Potato Raspberry Pi 2 B ALL-H3-CC H5 90K 180K 270K 360K 450K SE +/- 436.19, N = 3 SE +/- 5191.46, N = 4 SE +/- 3890.46, N = 3 SE +/- 2798.54, N = 3 SE +/- 2273.51, N = 3 SE +/- 335.35, N = 3 SE +/- 368.39, N = 3 SE +/- 1081.64, N = 3 SE +/- 677.69, N = 3 SE +/- 881.60, N = 3 SE +/- 1526.07, N = 5 SE +/- 1043.53, N = 3 SE +/- 405.28, N = 3 SE +/- 744.95, N = 3 SE +/- 313.11, N = 3 432278 390683 333535 218747 194581 189623 160053 159810 150337 131764 100561 79881 71525 67210 37927 1. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread
x264 H.264 Video Encoding OpenBenchmarking.org Frames Per Second, More Is Better x264 2018-07-28 H.264 Video Encoding Socionext Developerbox Jetson TX1 jetson_nano Tinker Board ODROID-C2 Pine64 1GB Firefly ROC-RK3328-CC Raspberry Pi 3 B+ Raspberry Pi 3 B ODROID-C1+ ALL-H3-CC H3 ALL-H3-CC H2+ Raspberry Pi 2 B 3 6 9 12 15 SE +/- 0.01, N = 3 SE +/- 0.06, N = 3 SE +/- 0.05, N = 10 SE +/- 0.05, N = 3 SE +/- 0.01, N = 3 SE +/- 0.00, N = 3 SE +/- 0.01, N = 3 SE +/- 0.00, N = 3 SE +/- 0.01, N = 3 SE +/- 0.01, N = 3 SE +/- 0.00, N = 3 SE +/- 0.00, N = 3 SE +/- 0.01, N = 3 12.41 5.96 5.05 4.42 2.89 2.12 2.12 2.09 2.03 1.46 1.14 1.13 1.10 -lavformat -lavcodec -lavutil -lswscale 1. (CC) gcc options: -ldl -lm -lpthread
C-Ray Total Time - 4K, 16 Rays Per Pixel OpenBenchmarking.org Seconds, Fewer Is Better C-Ray 1.1 Total Time - 4K, 16 Rays Per Pixel Socionext Developerbox Jetson TX2 Jetson TX1 Tinker Board jetson_nano ODROID-C2 Banana Pi M3 AML-S905X-CC Le Potato Firefly ROC-RK3328-CC Raspberry Pi 3 B+ Pine64 1GB Raspberry Pi 3 B ODROID-C1+ ALL-H3-CC H5 ALL-H3-CC H3 ALL-H3-CC H2+ Raspberry Pi 2 B 900 1800 2700 3600 4500 SE +/- 1.67, N = 3 SE +/- 60.69, N = 9 SE +/- 60.87, N = 9 SE +/- 5.86, N = 3 SE +/- 58.66, N = 9 SE +/- 0.45, N = 3 SE +/- 22.18, N = 3 SE +/- 2.44, N = 3 SE +/- 10.58, N = 3 SE +/- 2.67, N = 3 SE +/- 3.98, N = 3 SE +/- 16.16, N = 3 SE +/- 5.34, N = 3 SE +/- 5.10, N = 3 SE +/- 1.59, N = 3 SE +/- 6.17, N = 3 SE +/- 6.73, N = 3 391 675 851 1048 1050 1537 1669 1755 1773 2074 2342 2357 2720 3088 4156 4166 4375 1. (CC) gcc options: -lm -lpthread -O3
PostgreSQL pgbench Scaling: Buffer Test - Test: Normal Load - Mode: Read Only OpenBenchmarking.org TPS, More Is Better PostgreSQL pgbench 10.3 Scaling: Buffer Test - Test: Normal Load - Mode: Read Only Socionext Developerbox Jetson TX1 Jetson TX2 Tinker Board jetson_nano Raspberry Pi 3 B Raspberry Pi 3 B+ ODROID-C2 AML-S905X-CC Le Potato ODROID-C1+ Pine64 1GB Raspberry Pi 2 B Firefly ROC-RK3328-CC 7K 14K 21K 28K 35K SE +/- 64.76, N = 3 SE +/- 112.24, N = 3 SE +/- 29.83, N = 3 SE +/- 143.40, N = 3 SE +/- 65.69, N = 3 SE +/- 61.95, N = 3 SE +/- 115.45, N = 3 SE +/- 103.97, N = 4 SE +/- 32.74, N = 3 SE +/- 17.10, N = 3 SE +/- 9.36, N = 3 SE +/- 57.37, N = 3 SE +/- 8.74, N = 3 31506 16079 14427 13309 12068 6640 6526 6059 5502 5199 4555 3856 2977 1. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm
Git Time To Complete Common Git Commands OpenBenchmarking.org Seconds, Fewer Is Better Git Time To Complete Common Git Commands Jetson TX2 Jetson TX1 Tinker Board ODROID-C2 Firefly ROC-RK3328-CC Socionext Developerbox Raspberry Pi 3 B+ Pine64 1GB AML-S905X-CC Le Potato Raspberry Pi 3 B ODROID-C1+ ALL-H3-CC H5 ALL-H3-CC H3 ALL-H3-CC H2+ Raspberry Pi 2 B jetson_nano 30 60 90 120 150 SE +/- 0.20, N = 3 SE +/- 0.67, N = 12 SE +/- 0.68, N = 12 SE +/- 1.18, N = 12 SE +/- 0.91, N = 12 SE +/- 0.01, N = 3 SE +/- 1.49, N = 12 SE +/- 0.83, N = 3 SE +/- 0.94, N = 12 SE +/- 1.07, N = 3 SE +/- 0.83, N = 12 SE +/- 1.24, N = 12 SE +/- 1.30, N = 12 SE +/- 0.78, N = 3 SE +/- 1.28, N = 12 SE +/- 16.44, N = 9 17.57 23.66 26.06 38.99 40.04 46.37 51.84 52.64 54.41 57.19 69.23 77.19 87.37 91.83 97.32 156.74 1. Jetson TX2: git version 2.7.4 2. Jetson TX1: git version 2.7.4 3. Tinker Board: git version 2.11.0 4. ODROID-C2: git version 2.17.1 5. Firefly ROC-RK3328-CC: git version 2.17.1 6. Socionext Developerbox: git version 2.17.1 7. Raspberry Pi 3 B+: git version 2.11.0 8. Pine64 1GB: git version 2.7.4 9. AML-S905X-CC Le Potato: git version 2.11.0 10. Raspberry Pi 3 B: git version 2.11.0 11. ODROID-C1+: git version 2.7.4 12. ALL-H3-CC H5: git version 2.11.0 13. ALL-H3-CC H3: git version 2.17.1 14. ALL-H3-CC H2+: git version 2.17.1 15. Raspberry Pi 2 B: git version 2.11.0 16. jetson_nano: git version 2.17.1
PostgreSQL pgbench Scaling: Buffer Test - Test: Normal Load - Mode: Read Write OpenBenchmarking.org TPS, More Is Better PostgreSQL pgbench 10.3 Scaling: Buffer Test - Test: Normal Load - Mode: Read Write Socionext Developerbox Jetson TX2 Jetson TX1 Tinker Board ODROID-C2 AML-S905X-CC Le Potato Pine64 1GB Raspberry Pi 3 B ODROID-C1+ jetson_nano Firefly ROC-RK3328-CC Raspberry Pi 3 B+ Raspberry Pi 2 B 900 1800 2700 3600 4500 SE +/- 1.88, N = 3 SE +/- 17.07, N = 3 SE +/- 11.36, N = 3 SE +/- 34.75, N = 12 SE +/- 26.05, N = 12 SE +/- 2.18, N = 3 SE +/- 3.93, N = 3 SE +/- 6.52, N = 12 SE +/- 9.10, N = 12 SE +/- 32.66, N = 12 SE +/- 8.44, N = 12 SE +/- 1.99, N = 6 SE +/- 1.32, N = 3 4166 1793 1222 1142 719 603 456 409 345 316 263 144 133 1. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm
Phoronix Test Suite v10.8.4