UP Board Linux Benchmark Comparison

UP2 E3940 2GB Benchmarks comparison for a future article on up-community.org

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1612202-TA-1608052HA40
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts

Limit displaying results to tests within:

Bioinformatics 2 Tests
C/C++ Compiler Tests 6 Tests
CPU Massive 6 Tests
Creator Workloads 3 Tests
Cryptography 2 Tests
HPC - High Performance Computing 2 Tests
Multi-Core 3 Tests
Renderers 2 Tests
Scientific Computing 2 Tests
Server CPU Tests 4 Tests

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Geometric Means Per-Suite/Category
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable
Show Perf Per RAM Channel Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Hide
Result
Result
Identifier
View Logs
Performance Per
Dollar
Date
Run
  Test
  Duration
UP2 N4200 4GB
December 19 2016
 
Up Board 2GB
August 03 2016
 
Raspberry Pi 3
March 04 2016
 
Raspberry Pi 2
January 06 2016
 
Raspberry Pi Zero
January 06 2016
 
Jetson TX1
January 08 2016
 
Jetson TK1
January 08 2016
 
Banana Pi M2
January 10 2016
 
ODROID C1 Plus
January 05 2016
 
Orange Pi PC
January 07 2016
 
Orange Pi Plus
January 07 2016
 
UP2 E3940 2GB
December 19 2016
 
Invert Hiding All Results Option
 

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

UP2 N4200 4GB

Processor: Intel Pentium N4200 @ 2.50GHz (4 Cores), Motherboard: AAEON UP-APL01, Chipset: Intel Atom/Celeron/Pentium, Memory: 4 x 1024 MB DDR3 Unde, Disk: 31GB M52532, Graphics: Intel HD (Broxton) 3072MB, Audio: Intel Atom/Celeron/Pentium, Monitor: LP2151, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 16.10, Kernel: 4.8.0-30-generic (x86_64), Desktop: Unity 7.5.0, Display Server: X Server 1.18.4, Display Driver: modesetting 1.18.4, OpenGL: 4.3 Mesa 12.0.3, Compiler: GCC 6.2.0 20161005, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-browser-plugin --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-arch-directory=amd64 --with-default-libstdcxx-abi=new --with-multilib-list=m32,m64,mx32 --with-tune=generic -v
Processor Notes: Scaling Governor: intel_pstate powersave

Up Board 2GB

Processor: Intel Atom x5-Z8350 @ 1.92GHz (4 Cores), Motherboard: AAEON UP-CHT01, Chipset: Intel Device 2280, Memory: 1 x 2048 MB DDR3-1600MHz 00000000, Disk: 16GB M52516, Graphics: Intel Device 22b0 (500MHz), Monitor: SAMSUNG, Network: Realtek RTL8111/8168/8411

OS: ubilinux 3.0, Kernel: 4.4.0-ubi3-amd64 (x86_64), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Display Driver: intel 2.99.917, OpenGL: 3.3 Mesa 10.3.2, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-browser-plugin --disable-vtable-verify --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i586 --with-arch-directory=amd64 --with-multilib-list=m32,m64,mx32 --with-tune=generic -v
Processor Notes: Scaling Governor: intel_pstate powersave

Raspberry Pi 3

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 3 Model B Rev 1.2, Memory: 925MB, Disk: 16GB SD16G, Graphics: LLVMpipe

OS: Raspbian 8.0, Kernel: 4.1.18-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.17.2, OpenGL: 3.0 Mesa 11.1.0 Gallium 0.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Raspberry Pi 2

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 2 Model B Rev 1.1, Memory: 925MB, Disk: 8GB SD

OS: Raspbian 8.0, Kernel: 4.1.13-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Raspberry Pi Zero

Processor: ARMv6-compatible rev 7 @ 1.00GHz (1 Core), Motherboard: BCM2708 Raspberry Pi ? Rev 1.2, Memory: 434MB, Disk: 8GB SL08G

OS: Raspbian 8.0, Kernel: 4.1.13+ (armv6l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1776x952

Jetson TX1

Processor: Cortex A57 rev 1 @ 1.91GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA Tegra X1 (nvgpu)/, Monitor: Acer G237HL

OS: Ubuntu 14.04, Kernel: 3.10.67-g3a5c467 (aarch64), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 23.1.1, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + Clang 3.4-1ubuntu3 + CUDA 7.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Jetson TK1

Processor: ARMv7 rev 3 @ 2.32GHz (4 Cores), Motherboard: jetson-tk1, Memory: 2048MB, Disk: 16GB SEM16G, Graphics: GK20A/NullRM/AXI, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 14.04, Kernel: 3.10.40-gdacac96 (armv7l), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 21.4, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + CUDA 6.5, File-System: ext4, Screen Resolution: 1920x1080

Banana Pi M2

Processor: ARMv7 rev 3 @ 1.01GHz (4 Cores), Motherboard: Allwinner sun6i (A31) Family Banana Pi BPI-M2, Memory: 1024MB, Disk: 8GB SD

OS: Debian 8.1, Kernel: 4.2.0-BPI-kernel+ (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

ODROID C1 Plus

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 836MB, Disk: 8GB SD

OS: Ubuntu 14.04, Kernel: 3.10.80-135 (armv7l), Desktop: LXDE 0.6.1, Display Server: X Server 1.15.1, OpenGL: 2.1 Mesa 10.1.3, Compiler: GCC 4.9.3, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance

Orange Pi PC

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 16GB SL16G

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Orange Pi Plus

Changed Processor to ARMv7 rev 5 @ 1.20GHz (3 Cores).

UP2 E3940 2GB

Processor: Intel Atom E3940 @ 1.80GHz (4 Cores), Motherboard: AAEON UP-APL01, Chipset: Intel Atom/Celeron/Pentium, Memory: 2 x 1024 MB DDR3 Unde, Disk: 31GB M52532, Graphics: Intel HD (Broxton 2x6) 1920MB, Audio: Intel Atom/Celeron/Pentium, Monitor: LP2151, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 16.10, Kernel: 4.8.0-30-generic (x86_64), Desktop: Unity 7.5.0, Display Server: X Server 1.18.4, Display Driver: modesetting 1.18.4, OpenGL: 4.3 Mesa 12.0.3, Compiler: GCC 6.2.0 20161005, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-browser-plugin --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-arch-directory=amd64 --with-default-libstdcxx-abi=new --with-multilib-list=m32,m64,mx32 --with-tune=generic -v
Processor Notes: Scaling Governor: intel_pstate powersave

UP Board Linux Benchmark ComparisonProcessorMotherboardChipsetMemoryDiskGraphicsAudioMonitorNetworkOSKernelDesktopDisplay ServerDisplay DriverOpenGLCompilerFile-SystemScreen ResolutionUP2 N4200 4GBUp Board 2GBRaspberry Pi 3Raspberry Pi 2Raspberry Pi ZeroJetson TX1Jetson TK1Banana Pi M2ODROID C1 PlusOrange Pi PCOrange Pi PlusUP2 E3940 2GBIntel Pentium N4200 @ 2.50GHz (4 Cores)AAEON UP-APL01Intel Atom/Celeron/Pentium4 x 1024 MB DDR3 Unde31GB M52532Intel HD (Broxton) 3072MBIntel Atom/Celeron/PentiumLP2151Realtek RTL8111/8168/8411Ubuntu 16.104.8.0-30-generic (x86_64)Unity 7.5.0X Server 1.18.4modesetting 1.18.44.3 Mesa 12.0.3GCC 6.2.0 20161005ext41920x1080Intel Atom x5-Z8350 @ 1.92GHz (4 Cores)AAEON UP-CHT01Intel Device 22801 x 2048 MB DDR3-1600MHz 0000000016GB M52516Intel Device 22b0 (500MHz)SAMSUNGubilinux 3.04.4.0-ubi3-amd64 (x86_64)LXDE 0.7.2X Server 1.16.4intel 2.99.9173.3 Mesa 10.3.2GCC 4.9.2ARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2709 Raspberry Pi 3 Model B Rev 1.2925MB16GB SD16GLLVMpipeRaspbian 8.04.1.18-v7+ (armv7l)X Server 1.17.23.0 Mesa 11.1.0 Gallium 0.41824x984ARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2709 Raspberry Pi 2 Model B Rev 1.18GB SD4.1.13-v7+ (armv7l)X Server 1.16.4ARMv6-compatible rev 7 @ 1.00GHz (1 Core)BCM2708 Raspberry Pi ? Rev 1.2434MB8GB SL08G4.1.13+ (armv6l)1776x952Cortex A57 rev 1 @ 1.91GHz (4 Cores)jetson_tx14096MB16GB 016G32NVIDIA Tegra X1 (nvgpu)/Acer G237HLUbuntu 14.043.10.67-g3a5c467 (aarch64)Unity 7.2.2X Server 1.15.1NVIDIA 23.1.14.3.0GCC 4.8.4 + Clang 3.4-1ubuntu3 + CUDA 7.01920x1080ARMv7 rev 3 @ 2.32GHz (4 Cores)jetson-tk12048MB16GB SEM16GGK20A/NullRM/AXIRealtek RTL8111/8168/84113.10.40-gdacac96 (armv7l)NVIDIA 21.4GCC 4.8.4 + CUDA 6.5ARMv7 rev 3 @ 1.01GHz (4 Cores)Allwinner sun6i (A31) Family Banana Pi BPI-M21024MB8GB SDDebian 8.14.2.0-BPI-kernel+ (armv7l)GCC 4.9.2ARMv7 rev 1 @ 1.54GHz (4 Cores)ODROIDC836MBUbuntu 14.043.10.80-135 (armv7l)LXDE 0.6.1X Server 1.15.12.1 Mesa 10.1.3GCC 4.9.3ARMv7 rev 5 @ 1.20GHz (4 Cores)sun8i1024MB16GB SL16GRaspbian GNU/Linux 73.4.39 (armv7l)LXDE 0.7.1X Server 1.12.4GCC 4.6.31280x720ARMv7 rev 5 @ 1.20GHz (3 Cores)Intel Atom E3940 @ 1.80GHz (4 Cores)AAEON UP-APL01Intel Atom/Celeron/Pentium2 x 1024 MB DDR3 Unde31GB M52532Intel HD (Broxton 2x6) 1920MBIntel Atom/Celeron/PentiumLP2151Realtek RTL8111/8168/8411Ubuntu 16.104.8.0-30-generic (x86_64)Unity 7.5.0X Server 1.18.4modesetting 1.18.44.3 Mesa 12.0.3GCC 6.2.0 201610051920x1080OpenBenchmarking.orgCompiler Details- UP2 N4200 4GB: --build=x86_64-linux-gnu --disable-browser-plugin --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-arch-directory=amd64 --with-default-libstdcxx-abi=new --with-multilib-list=m32,m64,mx32 --with-tune=generic -v - Up Board 2GB: --build=x86_64-linux-gnu --disable-browser-plugin --disable-vtable-verify --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i586 --with-arch-directory=amd64 --with-multilib-list=m32,m64,mx32 --with-tune=generic -v - Raspberry Pi 3: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v - Raspberry Pi 2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v - Raspberry Pi Zero: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v - Jetson TX1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v - Jetson TK1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v - Banana Pi M2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v - ODROID C1 Plus: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v - Orange Pi PC: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Orange Pi Plus: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- UP2 E3940 2GB: --build=x86_64-linux-gnu --disable-browser-plugin --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-arch-directory=amd64 --with-default-libstdcxx-abi=new --with-multilib-list=m32,m64,mx32 --with-tune=generic -v Processor Details- UP2 N4200 4GB: Scaling Governor: intel_pstate powersave- Up Board 2GB: Scaling Governor: intel_pstate powersave- Raspberry Pi 3: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 2: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi Zero: Scaling Governor: BCM2835 Freq ondemand- Jetson TX1: Scaling Governor: tegra interactive- Jetson TK1: Scaling Governor: tegra interactive- Banana Pi M2: Scaling Governor: cpufreq-dt ondemand- ODROID C1 Plus: Scaling Governor: meson_cpufreq performance- Orange Pi PC: Scaling Governor: cpufreq-sunxi ondemand- Orange Pi Plus: Scaling Governor: cpufreq-sunxi ondemand- UP2 E3940 2GB: Scaling Governor: intel_pstate powersave

UP2 N4200 4GBUp Board 2GBRaspberry Pi 3Raspberry Pi 2Raspberry Pi ZeroJetson TX1Jetson TK1Banana Pi M2ODROID C1 PlusOrange Pi PCOrange Pi PlusUP2 E3940 2GBResult OverviewPhoronix Test Suite100%2186%4272%6358%8444%OpenSSLHimeno BenchmarkC-RaySmallptFLAC Audio EncodingTimed MAFFT AlignmentJohn The RipperR.4.b.PP.P.STotal TimeG.I.R.1.SWAV To FLACM.S.ABlowfish

UP Board Linux Benchmark Comparisonencode-flac: WAV To FLACopenssl: RSA 4096-bit Performancehimeno: Poisson Pressure Solvermafft: Multiple Sequence Alignmentsmallpt: Global Illumination Renderer; 100 Samplesc-ray: Total Timejohn-the-ripper: BlowfishUP2 N4200 4GBUp Board 2GBRaspberry Pi 3Raspberry Pi 2Raspberry Pi ZeroJetson TX1Jetson TK1Banana Pi M2ODROID C1 PlusOrange Pi PCOrange Pi PlusUP2 E3940 2GB14.53219.53787.1913.3825455.42296436.3075.70425.8327.16529147.491447228.3720.2562.5453.621388247.37629314.5811.9333.2975.462175505.44387606.762.6010.00501.11120293037.5788.7347.6424.6783.4016.5661385.30156350.2954.40141.3015.10288895.01422269.6313.4060.0871.581984436.18427200.5018.8081.9751.541590323.08494261.8311.9359.2477.161982951.10315257.877.8364.38103.0530421424.8632219.34164.50594.0117.6634074.232110OpenBenchmarking.org

Meta Performance Per Dollar

OpenBenchmarking.orgPerformance Per Dollar, More Is BetterMeta Performance Per DollarPerformance Per DollarJetson TK1Jetson TX1ODROID C1 PlusOrange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi 3Raspberry Pi ZeroUP2 E3940 2GBUP2 N4200 4GBUp Board 2GB2468101.030.794.075.072.923.586.788.085.666.656.561. Jetson TK1: $192 reported cost. Average result: 196.81.2. Jetson TX1: $599 reported cost. Average result: 471.18.3. ODROID C1 Plus: $45 reported cost. Average result: 183.06.4. Orange Pi PC: $25 reported cost. Average result: 126.84.5. Orange Pi Plus: $45 reported cost. Average result: 131.24.6. Raspberry Pi 2: $37 reported cost. Average result: 132.57.7. Raspberry Pi 3: $35 reported cost. Average result: 237.26.8. Raspberry Pi Zero: $5 reported cost. Average result: 40.41.9. UP2 E3940 2GB: $169 reported cost. Average result: 956.17.10. UP2 N4200 4GB: $199 reported cost. Average result: 1323.57.11. Up Board 2GB: $99 reported cost. Average result: 649.51.

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format three times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.1WAV To FLACBanana Pi M2Jetson TK1Jetson TX1ODROID C1 PlusOrange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi 3Raspberry Pi ZeroUP2 E3940 2GBUP2 N4200 4GBUp Board 2GB130260390520650SE +/- 0.15, N = 5SE +/- 0.02, N = 5SE +/- 0.05, N = 5SE +/- 2.46, N = 5SE +/- 2.52, N = 5SE +/- 1.28, N = 5SE +/- 1.30, N = 5SE +/- 0.36, N = 5SE +/- 3.95, N = 5SE +/- 0.02, N = 5SE +/- 0.00, N = 5SE +/- 0.01, N = 5269.6350.2947.64200.50261.83257.87314.58228.37606.7619.3414.5336.30-logg1. (CXX) g++ options: -O2 -fvisibility=hidden -lm

OpenSSL

OpenBenchmarking.orgSigns Per Second Per Dollar, More Is BetterOpenSSL 1.0.1gPerformance / Cost - RSA 4096-bit PerformanceJetson TK1Jetson TX1ODROID C1 PlusOrange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi 3Raspberry Pi ZeroUP2 E3940 2GBUP2 N4200 4GBUp Board 2GB0.24750.4950.74250.991.23750.280.040.420.480.170.320.580.520.971.100.761. Jetson TK1: $192 reported cost.2. Jetson TX1: $599 reported cost.3. ODROID C1 Plus: $45 reported cost.4. Orange Pi PC: $25 reported cost.5. Orange Pi Plus: $45 reported cost.6. Raspberry Pi 2: $37 reported cost.7. Raspberry Pi 3: $35 reported cost.8. Raspberry Pi Zero: $5 reported cost.9. UP2 E3940 2GB: $169 reported cost.10. UP2 N4200 4GB: $199 reported cost.11. Up Board 2GB: $99 reported cost.

OpenBenchmarking.orgSigns Per Second, More Is BetterOpenSSL 1.0.1gRSA 4096-bit PerformanceBanana Pi M2Jetson TK1Jetson TX1ODROID C1 PlusOrange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi 3Raspberry Pi ZeroUP2 E3940 2GBUP2 N4200 4GBUp Board 2GB50100150200250SE +/- 0.00, N = 3SE +/- 0.06, N = 3SE +/- 0.03, N = 3SE +/- 0.00, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.71, N = 6SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.07, N = 3SE +/- 0.00, N = 313.4054.4024.6718.8011.937.8311.9320.252.60164.50219.5375.70-march=armv7-a-fomit-frame-pointer-m64-m64-m641. (CC) gcc options: -O3 -lssl -lcrypto -ldl

Himeno Benchmark

OpenBenchmarking.orgMFLOPS Per Dollar, More Is BetterHimeno Benchmark 3.0Performance / Cost - Poisson Pressure SolverJetson TK1Jetson TX1ODROID C1 PlusOrange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi 3Raspberry Pi ZeroUP2 E3940 2GBUP2 N4200 4GBUp Board 2GB0.96751.9352.90253.874.83750.740.141.822.371.430.901.792.003.513.964.301. Jetson TK1: $192 reported cost.2. Jetson TX1: $599 reported cost.3. ODROID C1 Plus: $45 reported cost.4. Orange Pi PC: $25 reported cost.5. Orange Pi Plus: $45 reported cost.6. Raspberry Pi 2: $37 reported cost.7. Raspberry Pi 3: $35 reported cost.8. Raspberry Pi Zero: $5 reported cost.9. UP2 E3940 2GB: $169 reported cost.10. UP2 N4200 4GB: $199 reported cost.11. Up Board 2GB: $99 reported cost.

OpenBenchmarking.orgMFLOPS, More Is BetterHimeno Benchmark 3.0Poisson Pressure SolverBanana Pi M2Jetson TK1Jetson TX1ODROID C1 PlusOrange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi 3Raspberry Pi ZeroUP2 E3940 2GBUP2 N4200 4GBUp Board 2GB2004006008001000SE +/- 0.79, N = 3SE +/- 1.48, N = 3SE +/- 0.85, N = 3SE +/- 1.42, N = 3SE +/- 0.40, N = 3SE +/- 0.06, N = 3SE +/- 0.47, N = 3SE +/- 1.51, N = 6SE +/- 0.07, N = 3SE +/- 0.26, N = 3SE +/- 0.27, N = 3SE +/- 0.54, N = 360.08141.3083.4081.9759.2464.3833.2962.5410.00594.01787.19425.831. (CC) gcc options: -O3

Timed MAFFT Alignment

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed MAFFT Alignment 6.864Multiple Sequence AlignmentBanana Pi M2Jetson TK1Jetson TX1ODROID C1 PlusOrange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi 3Raspberry Pi ZeroUP2 E3940 2GBUP2 N4200 4GBUp Board 2GB110220330440550SE +/- 2.05, N = 6SE +/- 0.34, N = 6SE +/- 0.07, N = 3SE +/- 0.25, N = 3SE +/- 0.42, N = 3SE +/- 2.30, N = 6SE +/- 1.02, N = 3SE +/- 1.03, N = 3SE +/- 5.19, N = 3SE +/- 0.31, N = 6SE +/- 0.19, N = 5SE +/- 0.07, N = 371.5815.1016.5651.5477.16103.0575.4653.62501.1117.6613.3827.161. (CC) gcc options: -O3 -lm -lpthread

Smallpt

OpenBenchmarking.orgSeconds, Fewer Is BetterSmallpt 1.0Global Illumination Renderer; 100 SamplesBanana Pi M2Jetson TK1Jetson TX1ODROID C1 PlusOrange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi 3Raspberry Pi ZeroUP2 E3940 2GBUP2 N4200 4GBUp Board 2GB3K6K9K12K15KSE +/- 0.88, N = 3SE +/- 1.53, N = 3SE +/- 0.33, N = 3SE +/- 1.53, N = 3SE +/- 0.67, N = 3SE +/- 2.19, N = 3SE +/- 5.90, N = 3SE +/- 2.96, N = 3SE +/- 32.94, N = 3SE +/- 0.58, N = 3SE +/- 0.00, N = 3SE +/- 0.33, N = 31984288861315901982304221751388120293402545291. (CXX) g++ options: -fopenmp

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total TimeBanana Pi M2Jetson TK1Jetson TX1ODROID C1 PlusOrange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi 3Raspberry Pi ZeroUP2 E3940 2GBUP2 N4200 4GBUp Board 2GB7001400210028003500SE +/- 0.38, N = 3SE +/- 5.21, N = 6SE +/- 1.22, N = 6SE +/- 1.77, N = 3SE +/- 5.09, N = 3SE +/- 16.48, N = 3SE +/- 0.74, N = 3SE +/- 0.58, N = 3SE +/- 15.62, N = 3SE +/- 0.03, N = 3SE +/- 0.02, N = 3SE +/- 0.03, N = 3436.1895.0185.30323.08951.101424.86505.44247.373037.5774.2355.42147.491. (CC) gcc options: -lm -lpthread -O3

John The Ripper

OpenBenchmarking.orgReal C/S Per Dollar, More Is BetterJohn The Ripper 1.8.0Performance / Cost - Test: BlowfishJetson TK1Jetson TX1ODROID C1 PlusOrange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi 3Raspberry Pi ZeroUP2 E3940 2GBUP2 N4200 4GBUp Board 2GB481216202.202.6110.9812.607.1610.4617.9717.7512.4914.8914.621. Jetson TK1: $192 reported cost.2. Jetson TX1: $599 reported cost.3. ODROID C1 Plus: $45 reported cost.4. Orange Pi PC: $25 reported cost.5. Orange Pi Plus: $45 reported cost.6. Raspberry Pi 2: $37 reported cost.7. Raspberry Pi 3: $35 reported cost.8. Raspberry Pi Zero: $5 reported cost.9. UP2 E3940 2GB: $169 reported cost.10. UP2 N4200 4GB: $199 reported cost.11. Up Board 2GB: $99 reported cost.

OpenBenchmarking.orgReal C/S, More Is BetterJohn The Ripper 1.8.0Test: BlowfishBanana Pi M2Jetson TK1Jetson TX1ODROID C1 PlusOrange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi 3Raspberry Pi ZeroUP2 E3940 2GBUP2 N4200 4GBUp Board 2GB6001200180024003000SE +/- 0.33, N = 3SE +/- 0.33, N = 3SE +/- 1.73, N = 3SE +/- 0.33, N = 3SE +/- 14.50, N = 6SE +/- 0.00, N = 3SE +/- 0.67, N = 3SE +/- 9.50, N = 3SE +/- 1.73, N = 3SE +/- 82.10, N = 6SE +/- 1.86, N = 3SE +/- 1.00, N = 3427.00422.001563.00494.00315.00322.00387.00629.0088.732110.002964.001447.00-lcrypt-lcrypt-lcrypt1. (CC) gcc options: -fopenmp

UP2 N4200 4GB

Processor: Intel Pentium N4200 @ 2.50GHz (4 Cores), Motherboard: AAEON UP-APL01, Chipset: Intel Atom/Celeron/Pentium, Memory: 4 x 1024 MB DDR3 Unde, Disk: 31GB M52532, Graphics: Intel HD (Broxton) 3072MB, Audio: Intel Atom/Celeron/Pentium, Monitor: LP2151, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 16.10, Kernel: 4.8.0-30-generic (x86_64), Desktop: Unity 7.5.0, Display Server: X Server 1.18.4, Display Driver: modesetting 1.18.4, OpenGL: 4.3 Mesa 12.0.3, Compiler: GCC 6.2.0 20161005, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-browser-plugin --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-arch-directory=amd64 --with-default-libstdcxx-abi=new --with-multilib-list=m32,m64,mx32 --with-tune=generic -v
Processor Notes: Scaling Governor: intel_pstate powersave

Testing initiated at 19 December 2016 11:22 by user root.

Up Board 2GB

Processor: Intel Atom x5-Z8350 @ 1.92GHz (4 Cores), Motherboard: AAEON UP-CHT01, Chipset: Intel Device 2280, Memory: 1 x 2048 MB DDR3-1600MHz 00000000, Disk: 16GB M52516, Graphics: Intel Device 22b0 (500MHz), Monitor: SAMSUNG, Network: Realtek RTL8111/8168/8411

OS: ubilinux 3.0, Kernel: 4.4.0-ubi3-amd64 (x86_64), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Display Driver: intel 2.99.917, OpenGL: 3.3 Mesa 10.3.2, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-browser-plugin --disable-vtable-verify --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i586 --with-arch-directory=amd64 --with-multilib-list=m32,m64,mx32 --with-tune=generic -v
Processor Notes: Scaling Governor: intel_pstate powersave

Testing initiated at 3 August 2016 13:13 by user root.

Raspberry Pi 3

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 3 Model B Rev 1.2, Memory: 925MB, Disk: 16GB SD16G, Graphics: LLVMpipe

OS: Raspbian 8.0, Kernel: 4.1.18-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.17.2, OpenGL: 3.0 Mesa 11.1.0 Gallium 0.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 4 March 2016 23:10 by user pi.

Raspberry Pi 2

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 2 Model B Rev 1.1, Memory: 925MB, Disk: 8GB SD

OS: Raspbian 8.0, Kernel: 4.1.13-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 6 January 2016 20:24 by user pi.

Raspberry Pi Zero

Processor: ARMv6-compatible rev 7 @ 1.00GHz (1 Core), Motherboard: BCM2708 Raspberry Pi ? Rev 1.2, Memory: 434MB, Disk: 8GB SL08G

OS: Raspbian 8.0, Kernel: 4.1.13+ (armv6l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1776x952

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 6 January 2016 01:22 by user pi.

Jetson TX1

Processor: Cortex A57 rev 1 @ 1.91GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA Tegra X1 (nvgpu)/, Monitor: Acer G237HL

OS: Ubuntu 14.04, Kernel: 3.10.67-g3a5c467 (aarch64), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 23.1.1, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + Clang 3.4-1ubuntu3 + CUDA 7.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Testing initiated at 8 January 2016 20:16 by user ubuntu.

Jetson TK1

Processor: ARMv7 rev 3 @ 2.32GHz (4 Cores), Motherboard: jetson-tk1, Memory: 2048MB, Disk: 16GB SEM16G, Graphics: GK20A/NullRM/AXI, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 14.04, Kernel: 3.10.40-gdacac96 (armv7l), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 21.4, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + CUDA 6.5, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Testing initiated at 8 January 2016 22:06 by user ubuntu.

Banana Pi M2

Processor: ARMv7 rev 3 @ 1.01GHz (4 Cores), Motherboard: Allwinner sun6i (A31) Family Banana Pi BPI-M2, Memory: 1024MB, Disk: 8GB SD

OS: Debian 8.1, Kernel: 4.2.0-BPI-kernel+ (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

Testing initiated at 10 January 2016 14:02 by user pi.

ODROID C1 Plus

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 836MB, Disk: 8GB SD

OS: Ubuntu 14.04, Kernel: 3.10.80-135 (armv7l), Desktop: LXDE 0.6.1, Display Server: X Server 1.15.1, OpenGL: 2.1 Mesa 10.1.3, Compiler: GCC 4.9.3, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance

Testing initiated at 5 January 2016 20:42 by user odroid.

Orange Pi PC

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 16GB SL16G

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Testing initiated at 7 January 2016 19:03 by user root.

Orange Pi Plus

Processor: ARMv7 rev 5 @ 1.20GHz (3 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 16GB SL16G

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Testing initiated at 7 January 2016 01:35 by user root.

UP2 E3940 2GB

Processor: Intel Atom E3940 @ 1.80GHz (4 Cores), Motherboard: AAEON UP-APL01, Chipset: Intel Atom/Celeron/Pentium, Memory: 2 x 1024 MB DDR3 Unde, Disk: 31GB M52532, Graphics: Intel HD (Broxton 2x6) 1920MB, Audio: Intel Atom/Celeron/Pentium, Monitor: LP2151, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 16.10, Kernel: 4.8.0-30-generic (x86_64), Desktop: Unity 7.5.0, Display Server: X Server 1.18.4, Display Driver: modesetting 1.18.4, OpenGL: 4.3 Mesa 12.0.3, Compiler: GCC 6.2.0 20161005, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-browser-plugin --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-arch-directory=amd64 --with-default-libstdcxx-abi=new --with-multilib-list=m32,m64,mx32 --with-tune=generic -v
Processor Notes: Scaling Governor: intel_pstate powersave

Testing initiated at 19 December 2016 18:07 by user root.