dmesg - 1
Linux version 6.6.49-0-lts (buildozer@build-3-20-x86_64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #1-Alpine SMP PREEMPT_DYNAMIC 2024-09-04 12:53:09
Command line: BOOT_IMAGE=/boot/vmlinuz-lts modules=loop,squashfs,sd-mod,usb-storage quiet
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009afefff] usable
BIOS-e820: [mem 0x0000000009aff000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a227fff] ACPI NVS
BIOS-e820: [mem 0x000000000a228000-0x0000000092bc2fff] usable
BIOS-e820: [mem 0x0000000092bc3000-0x0000000092f1afff] reserved
BIOS-e820: [mem 0x0000000092f1b000-0x0000000092f7efff] ACPI data
BIOS-e820: [mem 0x0000000092f7f000-0x0000000097ff3fff] ACPI NVS
BIOS-e820: [mem 0x0000000097ff4000-0x00000000995fefff] reserved
BIOS-e820: [mem 0x00000000995ff000-0x000000009affcfff] usable
BIOS-e820: [mem 0x000000009affd000-0x000000009bffffff] reserved
BIOS-e820: [mem 0x000000009ce00000-0x000000009fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043e2fffff] usable
BIOS-e820: [mem 0x000000043f340000-0x00000004801fffff] reserved
NX (Execute Disable) protection: active
APIC: Static calls initialized
e820: update [mem 0x8db6c018-0x8db7de57] usable ==> usable
e820: update [mem 0x8db6c018-0x8db7de57] usable ==> usable
e820: update [mem 0x8db63018-0x8db6ba57] usable ==> usable
e820: update [mem 0x8db63018-0x8db6ba57] usable ==> usable
e820: update [mem 0x8db58018-0x8db62e57] usable ==> usable
e820: update [mem 0x8db58018-0x8db62e57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009afefff] usable
reserve setup_data: [mem 0x0000000009aff000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a227fff] ACPI NVS
reserve setup_data: [mem 0x000000000a228000-0x000000008db58017] usable
reserve setup_data: [mem 0x000000008db58018-0x000000008db62e57] usable
reserve setup_data: [mem 0x000000008db62e58-0x000000008db63017] usable
reserve setup_data: [mem 0x000000008db63018-0x000000008db6ba57] usable
reserve setup_data: [mem 0x000000008db6ba58-0x000000008db6c017] usable
reserve setup_data: [mem 0x000000008db6c018-0x000000008db7de57] usable
reserve setup_data: [mem 0x000000008db7de58-0x0000000092bc2fff] usable
reserve setup_data: [mem 0x0000000092bc3000-0x0000000092f1afff] reserved
reserve setup_data: [mem 0x0000000092f1b000-0x0000000092f7efff] ACPI data
reserve setup_data: [mem 0x0000000092f7f000-0x0000000097ff3fff] ACPI NVS
reserve setup_data: [mem 0x0000000097ff4000-0x00000000995fefff] reserved
reserve setup_data: [mem 0x00000000995ff000-0x000000009affcfff] usable
reserve setup_data: [mem 0x000000009affd000-0x000000009bffffff] reserved
reserve setup_data: [mem 0x000000009ce00000-0x000000009fffffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000043e2fffff] usable
reserve setup_data: [mem 0x000000043f340000-0x00000004801fffff] reserved
efi: EFI v2.8 by American Megatrends
efi: ACPI=0x97fdb000 ACPI 2.0=0x97fdb014 TPMFinalLog=0x97faa000 SMBIOS=0x993d2000 SMBIOS 3.0=0x993d1000 MEMATTR=0x8e9b3818 ESRT=0x902a8818 INITRD=0x8db7ee18 RNG=0x92f2e018 TPMEventLog=0x8db82018
random: crng init done
efi: Remove mem57: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
e820: remove [mem 0xe0000000-0xefffffff] reserved
efi: Remove mem58: MMIO range=[0xfd000000-0xfedfffff] (30MB) from e820 map
e820: remove [mem 0xfd000000-0xfedfffff] reserved
efi: Not removing mem59: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
efi: Remove mem60: MMIO range=[0xfee01000-0xffffffff] (17MB) from e820 map
e820: remove [mem 0xfee01000-0xffffffff] reserved
efi: Remove mem62: MMIO range=[0x460000000-0x4801fffff] (514MB) from e820 map
e820: remove [mem 0x460000000-0x4801fffff] reserved
SMBIOS 3.4.0 present.
DMI: Win Element S500+/S500+, BIOS 1.00 01/03/2024
tsc: Fast TSC calibration using PIT
tsc: Detected 2694.955 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x43e300 max_arch_pfn = 0x400000000
MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xa0000000-0xffffffff] usable ==> reserved
last_pfn = 0x9affd max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000902a8818 to 0x00000000902a8850.
e820: update [mem 0x902a8000-0x902a8fff] usable ==> reserved
Using GB pages for direct mapping
Secure boot disabled
RAMDISK: [mem 0x8832a000-0x89679fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000097FDB014 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000097FDA728 0000E4 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x0000000092F74000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x0000000092F6B000 008F4A (v02 ALASKA A M I 01072009 INTL 20200717)
ACPI: FACS 0x0000000097FA8000 000040
ACPI: SSDT 0x0000000092F7E000 000573 (v01 AMD ACDC 00000001 INTL 20200717)
ACPI: SSDT 0x0000000092F75000 00808B (v02 AMD AmdTable 00000002 MSFT 02000002)
ACPI: FIDT 0x0000000092F6A000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x0000000092F69000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: FPDT 0x0000000092F68000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: VFCT 0x0000000092F5D000 00AE84 (v01 ALASKA A M I 00000001 AMD 33504F47)
ACPI: BGRT 0x0000000092F5C000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: TPM2 0x0000000092F5B000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
ACPI: SSDT 0x0000000092F55000 005354 (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: CRAT 0x0000000092F54000 000EE8 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: CDIT 0x0000000092F53000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: SSDT 0x0000000092F52000 000BAB (v01 AMD AmdTable 00000001 INTL 20200717)
ACPI: SSDT 0x0000000092F4F000 0029B0 (v01 AMD AmdTable 00000001 INTL 20200717)
ACPI: SSDT 0x0000000092F47000 007EBA (v01 AMD AmdTable 00000001 INTL 20200717)
ACPI: WSMT 0x0000000092F46000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: APIC 0x0000000092F45000 0000E8 (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: IVRS 0x0000000092F44000 0001A4 (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: SSDT 0x0000000092F43000 0007D7 (v01 AMD AmdTable 00000001 INTL 20200717)
ACPI: SSDT 0x0000000092F41000 0010A5 (v01 AMD AmdTable 00000001 INTL 20200717)
ACPI: SSDT 0x0000000092F40000 0007B5 (v01 AMD AmdTable 00000001 INTL 20200717)
ACPI: SSDT 0x0000000092F36000 009479 (v01 AMD AmdTable 00000001 INTL 20200717)
ACPI: SSDT 0x0000000092F30000 005022 (v01 AMD AmdTable 00000001 INTL 20200717)
ACPI: SSDT 0x0000000092F2F000 000C77 (v01 AMD AmdTable 00000001 INTL 20200717)
ACPI: Reserving FACP table memory at [mem 0x92f74000-0x92f74113]
ACPI: Reserving DSDT table memory at [mem 0x92f6b000-0x92f73f49]
ACPI: Reserving FACS table memory at [mem 0x97fa8000-0x97fa803f]
ACPI: Reserving SSDT table memory at [mem 0x92f7e000-0x92f7e572]
ACPI: Reserving SSDT table memory at [mem 0x92f75000-0x92f7d08a]
ACPI: Reserving FIDT table memory at [mem 0x92f6a000-0x92f6a09b]
ACPI: Reserving MCFG table memory at [mem 0x92f69000-0x92f6903b]
ACPI: Reserving FPDT table memory at [mem 0x92f68000-0x92f68043]
ACPI: Reserving VFCT table memory at [mem 0x92f5d000-0x92f67e83]
ACPI: Reserving BGRT table memory at [mem 0x92f5c000-0x92f5c037]
ACPI: Reserving TPM2 table memory at [mem 0x92f5b000-0x92f5b04b]
ACPI: Reserving SSDT table memory at [mem 0x92f55000-0x92f5a353]
ACPI: Reserving CRAT table memory at [mem 0x92f54000-0x92f54ee7]
ACPI: Reserving CDIT table memory at [mem 0x92f53000-0x92f53028]
ACPI: Reserving SSDT table memory at [mem 0x92f52000-0x92f52baa]
ACPI: Reserving SSDT table memory at [mem 0x92f4f000-0x92f519af]
ACPI: Reserving SSDT table memory at [mem 0x92f47000-0x92f4eeb9]
ACPI: Reserving WSMT table memory at [mem 0x92f46000-0x92f46027]
ACPI: Reserving APIC table memory at [mem 0x92f45000-0x92f450e7]
ACPI: Reserving IVRS table memory at [mem 0x92f44000-0x92f441a3]
ACPI: Reserving SSDT table memory at [mem 0x92f43000-0x92f437d6]
ACPI: Reserving SSDT table memory at [mem 0x92f41000-0x92f420a4]
ACPI: Reserving SSDT table memory at [mem 0x92f40000-0x92f407b4]
ACPI: Reserving SSDT table memory at [mem 0x92f36000-0x92f3f478]
ACPI: Reserving SSDT table memory at [mem 0x92f30000-0x92f35021]
ACPI: Reserving SSDT table memory at [mem 0x92f2f000-0x92f2fc76]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043e2fffff]
NODE_DATA(0) allocated [mem 0x43e2fa000-0x43e2fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043e2fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009afefff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a228000-0x0000000092bc2fff]
node 0: [mem 0x00000000995ff000-0x000000009affcfff]
node 0: [mem 0x0000000100000000-0x000000043e2fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000043e2fffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 1281 pages in unavailable ranges
On node 0, zone DMA32: 40 pages in unavailable ranges
On node 0, zone DMA32: 27196 pages in unavailable ranges
On node 0, zone Normal: 20483 pages in unavailable ranges
On node 0, zone Normal: 7424 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 1 global_irq 1 low edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: Using ACPI (MADT) for SMP configuration information
e820: update [mem 0x8ce5d000-0x8d44bfff] usable ==> reserved
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09aff000-0x09ffffff]
PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a227fff]
PM: hibernation: Registered nosave memory: [mem 0x8ce5d000-0x8d44bfff]
PM: hibernation: Registered nosave memory: [mem 0x8db58000-0x8db58fff]
PM: hibernation: Registered nosave memory: [mem 0x8db62000-0x8db62fff]
PM: hibernation: Registered nosave memory: [mem 0x8db63000-0x8db63fff]
PM: hibernation: Registered nosave memory: [mem 0x8db6b000-0x8db6bfff]
PM: hibernation: Registered nosave memory: [mem 0x8db6c000-0x8db6cfff]
PM: hibernation: Registered nosave memory: [mem 0x8db7d000-0x8db7dfff]
PM: hibernation: Registered nosave memory: [mem 0x902a8000-0x902a8fff]
PM: hibernation: Registered nosave memory: [mem 0x92bc3000-0x92f1afff]
PM: hibernation: Registered nosave memory: [mem 0x92f1b000-0x92f7efff]
PM: hibernation: Registered nosave memory: [mem 0x92f7f000-0x97ff3fff]
PM: hibernation: Registered nosave memory: [mem 0x97ff4000-0x995fefff]
PM: hibernation: Registered nosave memory: [mem 0x9affd000-0x9bffffff]
PM: hibernation: Registered nosave memory: [mem 0x9c000000-0x9cdfffff]
PM: hibernation: Registered nosave memory: [mem 0x9ce00000-0x9fffffff]
PM: hibernation: Registered nosave memory: [mem 0xa0000000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[mem 0xa0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 58 pages/cpu s198632 r8192 d30744 u262144
pcpu-alloc: s198632 r8192 d30744 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-lts modules=loop,squashfs,sd-mod,usb-storage quiet
Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-lts modules=loop,squashfs,sd-mod,usb-storage", will be passed to user space.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 3943945
Policy zone: Normal
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
software IO TLB: area num 16.
Memory: 15533732K/16026844K available (14336K kernel code, 1958K rwdata, 9356K rodata, 3488K init, 4760K bss, 492856K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
kmemleak: Kernel memory leak detector disabled
ftrace: allocating 41041 entries in 161 pages
ftrace: allocated 161 pages with 3 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 16640, nr_irqs: 1096, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230628
APIC: Switch to symmetric I/O mode setup
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160
AMD-Vi: Using global IVHD EFR:0x246577efa2254afa, EFR2:0x0
x2apic: IRQ remapping doesn't support X2APIC mode
APIC: Switched APIC routing to: physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d8a0ba8cd, max_idle_ns: 440795311069 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5392.48 BogoMIPS (lpj=8983183)
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP always-on protection
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
Speculative Return Stack Overflow: IBPB-extending microcode not applied!
Speculative Return Stack Overflow: WARNING: See for mitigation options.
Speculative Return Stack Overflow: Vulnerable: Safe RET, no microcode
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
Freeing SMP alternatives memory: 36K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=lockdown,capability,landlock,yama
landlock: Up and running.
Yama: becoming mindful.
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
smpboot: CPU0: AMD Ryzen 7 6810U with Radeon Graphics (family: 0x19, model: 0x44, stepping: 0x1)
RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
signal: max sigframe size: 3376
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
MCE: In-kernel MCE decoding enabled.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node #0, CPUs: #2 #4 #6 #8 #10 #12 #14 #1 #3 #5 #7 #9 #11 #13 #15
Spectre V2 : Update user space SMT mitigation: STIBP always-on
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
----------------
| NMI testsuite:
--------------------
remote IPI: ok |
local IPI: ok |
--------------------
Good, all 2 testcases passed! |
---------------------------------
smpboot: Total of 16 processors activated (86273.83 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a227fff] (163840 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0x92f7f000-0x97ff3fff] (84365312 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1730144919.183:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor ladder
cpuidle: using governor menu
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: Using configuration type 1 for base access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 13 ACPI AML tables successfully acquired and loaded
ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
ACPI: _OSC evaluation for CPUs failed, trying _PDC
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Ignoring E820 reservations for host bridge windows
ACPI: Enabled 6 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0.GP11.PWRS: New power resource
ACPI: \_SB_.PCI0.GP11: Overriding _PRW sleep state (S4) by S0 from power resources
ACPI: \_SB_.PCI0.GP11.SWUS.PWRS: New power resource
ACPI: \_SB_.PCI0.GP12.PWRS: New power resource
ACPI: \_SB_.PCI0.GP12: Overriding _PRW sleep state (S4) by S0 from power resources
ACPI: \_SB_.PCI0.GP12.SWUS.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.VGA_.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.HDAU.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.ACP_.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.AZAL.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.XHC0.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.XHC1.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.XHC2.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.XHC3.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.XHC4.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.NHI0.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.NHI0: Overriding _PRW sleep state (S4) by S0 from power resources
ACPI: \_SB_.PCI0.GP19.NHI1.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.NHI1: Overriding _PRW sleep state (S4) by S0 from power resources
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0x460000000-0x7fffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:14b5] type 00 class 0x060000
pci 0000:00:00.2: [1022:14b6] type 00 class 0x080600
pci 0000:00:01.0: [1022:14b7] type 00 class 0x060000
pci 0000:00:01.3: [1022:14ba] type 01 class 0x060400
pci 0000:00:01.3: enabling Extended Tags
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:14b7] type 00 class 0x060000
pci 0000:00:02.1: [1022:14ba] type 01 class 0x060400
pci 0000:00:02.1: enabling Extended Tags
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: [1022:14ba] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: [1022:14ba] type 01 class 0x060400
pci 0000:00:02.3: enabling Extended Tags
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1022:14b7] type 00 class 0x060000
pci 0000:00:03.1: [1022:14cd] type 01 class 0x060400
pci 0000:00:03.1: enabling Extended Tags
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:14b7] type 00 class 0x060000
pci 0000:00:04.1: [1022:14cd] type 01 class 0x060400
pci 0000:00:04.1: enabling Extended Tags
pci 0000:00:04.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:14b7] type 00 class 0x060000
pci 0000:00:08.1: [1022:14b9] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.3: [1022:14b9] type 01 class 0x060400
pci 0000:00:08.3: enabling Extended Tags
pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1679] type 00 class 0x060000
pci 0000:00:18.1: [1022:167a] type 00 class 0x060000
pci 0000:00:18.2: [1022:167b] type 00 class 0x060000
pci 0000:00:18.3: [1022:167c] type 00 class 0x060000
pci 0000:00:18.4: [1022:167d] type 00 class 0x060000
pci 0000:00:18.5: [1022:167e] type 00 class 0x060000
pci 0000:00:18.6: [1022:167f] type 00 class 0x060000
pci 0000:00:18.7: [1022:1680] type 00 class 0x060000
pci 0000:01:00.0: [8086:125c] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xdc900000-0xdc9fffff]
pci 0000:01:00.0: reg 0x1c: [mem 0xdca00000-0xdca03fff]
pci 0000:01:00.0: reg 0x30: [mem 0xdc800000-0xdc8fffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 01]
pci 0000:00:01.3: bridge window [mem 0xdc800000-0xdcafffff]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xdcc00000-0xdcc00fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0x7ff0500000-0x7ff0503fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PCI bridge to [bus 02]
pci 0000:00:02.1: bridge window [io 0xf000-0xffff]
pci 0000:00:02.1: bridge window [mem 0xdcc00000-0xdccfffff]
pci 0000:00:02.1: bridge window [mem 0x7ff0500000-0x7ff05fffff 64bit pref]
pci 0000:03:00.0: [14c3:7961] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0x7ff0300000-0x7ff03fffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0x7ff0400000-0x7ff0403fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0x7ff0404000-0x7ff0404fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [mem 0x7ff0300000-0x7ff04fffff 64bit pref]
pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:04:00.0: reg 0x10: [io 0xe050-0xe057]
pci 0000:04:00.0: reg 0x14: [io 0xe040-0xe043]
pci 0000:04:00.0: reg 0x18: [io 0xe030-0xe037]
pci 0000:04:00.0: reg 0x1c: [io 0xe020-0xe023]
pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe01f]
pci 0000:04:00.0: reg 0x24: [mem 0xdcb10000-0xdcb101ff]
pci 0000:04:00.0: reg 0x30: [mem 0xdcb00000-0xdcb0ffff pref]
pci 0000:00:02.3: PCI bridge to [bus 04]
pci 0000:00:02.3: bridge window [io 0xe000-0xefff]
pci 0000:00:02.3: bridge window [mem 0xdcb00000-0xdcbfffff]
pci 0000:00:03.1: PCI bridge to [bus 05-74]
pci 0000:00:03.1: bridge window [io 0xb000-0xcfff]
pci 0000:00:03.1: bridge window [mem 0xc4000000-0xdbffffff]
pci 0000:00:03.1: bridge window [mem 0x7fb0000000-0x7fd7ffffff 64bit pref]
pci 0000:00:04.1: PCI bridge to [bus 75-e4]
pci 0000:00:04.1: bridge window [io 0x9000-0xafff]
pci 0000:00:04.1: bridge window [mem 0xac000000-0xc3ffffff]
pci 0000:00:04.1: bridge window [mem 0x7f80000000-0x7fa7ffffff 64bit pref]
pci 0000:e5:00.0: [1002:1681] type 00 class 0x030000
pci 0000:e5:00.0: reg 0x10: [mem 0x7fe0000000-0x7fefffffff 64bit pref]
pci 0000:e5:00.0: reg 0x18: [mem 0x7ff0000000-0x7ff01fffff 64bit pref]
pci 0000:e5:00.0: reg 0x20: [io 0xd000-0xd0ff]
pci 0000:e5:00.0: reg 0x24: [mem 0xdc700000-0xdc77ffff]
pci 0000:e5:00.0: enabling Extended Tags
pci 0000:e5:00.0: BAR 0: assigned to efifb
pci 0000:e5:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:e5:00.1: [1002:1640] type 00 class 0x040300
pci 0000:e5:00.1: reg 0x10: [mem 0xdc788000-0xdc78bfff]
pci 0000:e5:00.1: enabling Extended Tags
pci 0000:e5:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:e5:00.2: [1022:1649] type 00 class 0x108000
pci 0000:e5:00.2: reg 0x18: [mem 0xdc600000-0xdc6fffff]
pci 0000:e5:00.2: reg 0x24: [mem 0xdc78c000-0xdc78dfff]
pci 0000:e5:00.2: enabling Extended Tags
pci 0000:e5:00.3: [1022:161d] type 00 class 0x0c0330
pci 0000:e5:00.3: reg 0x10: [mem 0xdc500000-0xdc5fffff 64bit]
pci 0000:e5:00.3: enabling Extended Tags
pci 0000:e5:00.3: PME# supported from D0 D3hot D3cold
pci 0000:e5:00.4: [1022:161e] type 00 class 0x0c0330
pci 0000:e5:00.4: reg 0x10: [mem 0xdc400000-0xdc4fffff 64bit]
pci 0000:e5:00.4: enabling Extended Tags
pci 0000:e5:00.4: PME# supported from D0 D3hot D3cold
pci 0000:e5:00.6: [1022:15e3] type 00 class 0x040300
pci 0000:e5:00.6: reg 0x10: [mem 0xdc780000-0xdc787fff]
pci 0000:e5:00.6: enabling Extended Tags
pci 0000:e5:00.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus e5]
pci 0000:00:08.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:08.1: bridge window [mem 0xdc400000-0xdc7fffff]
pci 0000:00:08.1: bridge window [mem 0x7fe0000000-0x7ff01fffff 64bit pref]
pci 0000:e6:00.0: [1022:161f] type 00 class 0x0c0330
pci 0000:e6:00.0: reg 0x10: [mem 0xdc200000-0xdc2fffff 64bit]
pci 0000:e6:00.0: enabling Extended Tags
pci 0000:e6:00.0: PME# supported from D0 D3hot D3cold
pci 0000:e6:00.3: [1022:15d6] type 00 class 0x0c0330
pci 0000:e6:00.3: reg 0x10: [mem 0xdc100000-0xdc1fffff 64bit]
pci 0000:e6:00.3: enabling Extended Tags
pci 0000:e6:00.3: PME# supported from D0 D3hot D3cold
pci 0000:e6:00.4: [1022:15d7] type 00 class 0x0c0330
pci 0000:e6:00.4: reg 0x10: [mem 0xdc000000-0xdc0fffff 64bit]
pci 0000:e6:00.4: enabling Extended Tags
pci 0000:e6:00.4: PME# supported from D0 D3hot D3cold
pci 0000:e6:00.5: [1022:162e] type 00 class 0x0c0340
pci 0000:e6:00.5: reg 0x10: [mem 0xdc380000-0xdc3fffff 64bit]
pci 0000:e6:00.5: enabling Extended Tags
pci 0000:e6:00.5: PME# supported from D0 D3hot D3cold
pci 0000:e6:00.6: [1022:162f] type 00 class 0x0c0340
pci 0000:e6:00.6: reg 0x10: [mem 0xdc300000-0xdc37ffff 64bit]
pci 0000:e6:00.6: enabling Extended Tags
pci 0000:e6:00.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.3: PCI bridge to [bus e6]
pci 0000:00:08.3: bridge window [mem 0xdc000000-0xdc3fffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
efivars: Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09aff000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x8ce5d000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8db58018-0x8fffffff]
e820: reserve RAM buffer [mem 0x8db63018-0x8fffffff]
e820: reserve RAM buffer [mem 0x8db6c018-0x8fffffff]
e820: reserve RAM buffer [mem 0x902a8000-0x93ffffff]
e820: reserve RAM buffer [mem 0x92bc3000-0x93ffffff]
e820: reserve RAM buffer [mem 0x9affd000-0x9bffffff]
e820: reserve RAM buffer [mem 0x43e300000-0x43fffffff]
pci 0000:e5:00.0: vgaarb: setting as boot VGA device
pci 0000:e5:00.0: vgaarb: bridge control possible
pci 0000:e5:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
vgaarb: loaded
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:02: [io 0x0a00-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
pnp 00:03: [dma 0 disabled]
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:01.3: PCI bridge to [bus 01]
pci 0000:00:01.3: bridge window [mem 0xdc800000-0xdcafffff]
pci 0000:00:02.1: PCI bridge to [bus 02]
pci 0000:00:02.1: bridge window [io 0xf000-0xffff]
pci 0000:00:02.1: bridge window [mem 0xdcc00000-0xdccfffff]
pci 0000:00:02.1: bridge window [mem 0x7ff0500000-0x7ff05fffff 64bit pref]
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [mem 0x7ff0300000-0x7ff04fffff 64bit pref]
pci 0000:00:02.3: PCI bridge to [bus 04]
pci 0000:00:02.3: bridge window [io 0xe000-0xefff]
pci 0000:00:02.3: bridge window [mem 0xdcb00000-0xdcbfffff]
pci 0000:00:03.1: PCI bridge to [bus 05-74]
pci 0000:00:03.1: bridge window [io 0xb000-0xcfff]
pci 0000:00:03.1: bridge window [mem 0xc4000000-0xdbffffff]
pci 0000:00:03.1: bridge window [mem 0x7fb0000000-0x7fd7ffffff 64bit pref]
pci 0000:00:04.1: PCI bridge to [bus 75-e4]
pci 0000:00:04.1: bridge window [io 0x9000-0xafff]
pci 0000:00:04.1: bridge window [mem 0xac000000-0xc3ffffff]
pci 0000:00:04.1: bridge window [mem 0x7f80000000-0x7fa7ffffff 64bit pref]
pci 0000:00:08.1: PCI bridge to [bus e5]
pci 0000:00:08.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:08.1: bridge window [mem 0xdc400000-0xdc7fffff]
pci 0000:00:08.1: bridge window [mem 0x7fe0000000-0x7ff01fffff 64bit pref]
pci 0000:00:08.3: PCI bridge to [bus e6]
pci 0000:00:08.3: bridge window [mem 0xdc000000-0xdc3fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0xa0000000-0xdfffffff window]
pci_bus 0000:00: resource 10 [mem 0x460000000-0x7fffffffff window]
pci_bus 0000:01: resource 1 [mem 0xdc800000-0xdcafffff]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xdcc00000-0xdccfffff]
pci_bus 0000:02: resource 2 [mem 0x7ff0500000-0x7ff05fffff 64bit pref]
pci_bus 0000:03: resource 2 [mem 0x7ff0300000-0x7ff04fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xdcb00000-0xdcbfffff]
pci_bus 0000:05: resource 0 [io 0xb000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xc4000000-0xdbffffff]
pci_bus 0000:05: resource 2 [mem 0x7fb0000000-0x7fd7ffffff 64bit pref]
pci_bus 0000:75: resource 0 [io 0x9000-0xafff]
pci_bus 0000:75: resource 1 [mem 0xac000000-0xc3ffffff]
pci_bus 0000:75: resource 2 [mem 0x7f80000000-0x7fa7ffffff 64bit pref]
pci_bus 0000:e5: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:e5: resource 1 [mem 0xdc400000-0xdc7fffff]
pci_bus 0000:e5: resource 2 [mem 0x7fe0000000-0x7ff01fffff 64bit pref]
pci_bus 0000:e6: resource 1 [mem 0xdc000000-0xdc3fffff]
pci 0000:e5:00.1: D0 power state depends on 0000:e5:00.0
pci 0000:00:08.1: can't derive routing for PCI INT A
pci 0000:00:08.1: PCI INT A: not connected
pci 0000:00:08.3: can't derive routing for PCI INT A
pci 0000:00:08.3: PCI INT A: not connected
PCI: CLS 64 bytes, default 64
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
Trying to unpack rootfs image as initramfs...
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.3: Adding to iommu group 1
pci 0000:00:02.0: Adding to iommu group 2
pci 0000:00:02.1: Adding to iommu group 3
pci 0000:00:02.2: Adding to iommu group 4
pci 0000:00:02.3: Adding to iommu group 5
pci 0000:00:03.0: Adding to iommu group 6
pci 0000:00:03.1: Adding to iommu group 6
pci 0000:00:04.0: Adding to iommu group 7
pci 0000:00:04.1: Adding to iommu group 7
pci 0000:00:08.0: Adding to iommu group 8
pci 0000:00:08.1: Adding to iommu group 9
pci 0000:00:08.3: Adding to iommu group 10
pci 0000:00:14.0: Adding to iommu group 11
pci 0000:00:14.3: Adding to iommu group 11
pci 0000:00:18.0: Adding to iommu group 12
pci 0000:00:18.1: Adding to iommu group 12
pci 0000:00:18.2: Adding to iommu group 12
pci 0000:00:18.3: Adding to iommu group 12
pci 0000:00:18.4: Adding to iommu group 12
pci 0000:00:18.5: Adding to iommu group 12
pci 0000:00:18.6: Adding to iommu group 12
pci 0000:00:18.7: Adding to iommu group 12
pci 0000:01:00.0: Adding to iommu group 13
pci 0000:02:00.0: Adding to iommu group 14
pci 0000:03:00.0: Adding to iommu group 15
pci 0000:04:00.0: Adding to iommu group 16
pci 0000:e5:00.0: Adding to iommu group 17
pci 0000:e5:00.1: Adding to iommu group 18
pci 0000:e5:00.2: Adding to iommu group 19
pci 0000:e5:00.3: Adding to iommu group 20
pci 0000:e5:00.4: Adding to iommu group 21
pci 0000:e5:00.6: Adding to iommu group 22
pci 0000:e6:00.0: Adding to iommu group 23
pci 0000:e6:00.3: Adding to iommu group 24
pci 0000:e6:00.4: Adding to iommu group 25
pci 0000:e6:00.5: Adding to iommu group 26
pci 0000:e6:00.6: Adding to iommu group 27
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
AMD-Vi: Extended features (0x246577efa2254afa, 0x0): PPR NX GT [5] IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x000000008432a000-0x000000008832a000] (64MB)
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003fd)
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.3: PME: Signaling with IRQ 36
pcieport 0000:00:02.1: PME: Signaling with IRQ 37
pcieport 0000:00:02.2: PME: Signaling with IRQ 38
pcieport 0000:00:02.3: PME: Signaling with IRQ 39
pcieport 0000:00:03.1: PME: Signaling with IRQ 40
pcieport 0000:00:03.1: AER: enabled with IRQ 40
pcieport 0000:00:03.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
pcieport 0000:00:04.1: PME: Signaling with IRQ 41
pcieport 0000:00:04.1: AER: enabled with IRQ 41
pcieport 0000:00:04.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
pcieport 0000:00:08.1: PME: Signaling with IRQ 42
pcieport 0000:00:08.3: PME: Signaling with IRQ 43
pcieport 0000:00:08.3: AER: enabled with IRQ 43
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Estimated ratio of average max frequency by base frequency (times 1024): 1416
Monitor-Mwait will be used to enter C-1 state
ACPI: \_SB_.PLTF.P000: Found 3 idle states
ACPI: \_SB_.PLTF.P001: Found 3 idle states
ACPI: \_SB_.PLTF.P002: Found 3 idle states
ACPI: \_SB_.PLTF.P003: Found 3 idle states
ACPI: \_SB_.PLTF.P004: Found 3 idle states
ACPI: \_SB_.PLTF.P005: Found 3 idle states
ACPI: \_SB_.PLTF.P006: Found 3 idle states
ACPI: \_SB_.PLTF.P007: Found 3 idle states
ACPI: \_SB_.PLTF.P008: Found 3 idle states
ACPI: \_SB_.PLTF.P009: Found 3 idle states
ACPI: \_SB_.PLTF.P00A: Found 3 idle states
ACPI: \_SB_.PLTF.P00B: Found 3 idle states
ACPI: \_SB_.PLTF.P00C: Found 3 idle states
ACPI: \_SB_.PLTF.P00D: Found 3 idle states
ACPI: \_SB_.PLTF.P00E: Found 3 idle states
ACPI: \_SB_.PLTF.P00F: Found 3 idle states
ERST DBG: ERST support is disabled.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
hpet_acpi_add: no address or irqs in _CRS
brd: module loaded
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
i8042: No controller found
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: setting system clock to 2024-10-28T19:48:39 UTC (1730144919)
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
gre: GRE over IPv4 demultiplexor driver
NET: Registered PF_INET6 protocol family
Freeing initrd memory: 19776K
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
can: controller area network core
NET: Registered PF_CAN protocol family
Key type dns_resolver registered
microcode: CPU8: patch_level=0x0a404102
microcode: CPU9: patch_level=0x0a404102
microcode: CPU13: patch_level=0x0a404102
microcode: CPU12: patch_level=0x0a404102
microcode: CPU1: patch_level=0x0a404102
microcode: CPU0: patch_level=0x0a404102
microcode: CPU2: patch_level=0x0a404102
microcode: CPU3: patch_level=0x0a404102
microcode: CPU5: patch_level=0x0a404102
microcode: CPU4: patch_level=0x0a404102
microcode: CPU14: patch_level=0x0a404102
microcode: CPU6: patch_level=0x0a404102
microcode: CPU7: patch_level=0x0a404102
microcode: CPU10: patch_level=0x0a404102
microcode: CPU11: patch_level=0x0a404102
microcode: CPU15: patch_level=0x0a404102
microcode: Microcode Update Driver: v2.2.
resctrl: L3 allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (521276585, 399282)->(524115499, -2439632)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
Key type .fscrypt registered
Key type fscrypt-provisioning registered
clk: Disabling unused clocks
Freeing unused kernel image (initmem) memory: 3488K
Write protecting the kernel read-only data: 24576k
Freeing unused kernel image (rodata/data gap) memory: 884K
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-lts
modules=loop,squashfs,sd-mod,usb-storage
Alpine Init 3.10.1-r0
Loading boot drivers...
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
ACPI: bus type drm_connector registered
[drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
fbcon: Deferring console take-over
simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
Loading boot drivers: ok.
Mounting boot media...
xhci_hcd 0000:e5:00.3: xHCI Host Controller
xhci_hcd 0000:e5:00.3: new USB bus registered, assigned bus number 1
xhci_hcd 0000:e5:00.3: hcc params 0x0120ffc5 hci version 0x120 quirks 0x0000000200000410
xhci_hcd 0000:e5:00.3: xHCI Host Controller
xhci_hcd 0000:e5:00.3: new USB bus registered, assigned bus number 2
xhci_hcd 0000:e5:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.6.49-0-lts xhci-hcd
usb usb1: SerialNumber: 0000:e5:00.3
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.6.49-0-lts xhci-hcd
usb usb2: SerialNumber: 0000:e5:00.3
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:e5:00.4: xHCI Host Controller
xhci_hcd 0000:e5:00.4: new USB bus registered, assigned bus number 3
xhci_hcd 0000:e5:00.4: hcc params 0x0120ffc5 hci version 0x120 quirks 0x0000000200000410
xhci_hcd 0000:e5:00.4: xHCI Host Controller
xhci_hcd 0000:e5:00.4: new USB bus registered, assigned bus number 4
xhci_hcd 0000:e5:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.6.49-0-lts xhci-hcd
usb usb3: SerialNumber: 0000:e5:00.4
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.6.49-0-lts xhci-hcd
usb usb4: SerialNumber: 0000:e5:00.4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:e6:00.0: xHCI Host Controller
xhci_hcd 0000:e6:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:e6:00.0: USB3 root hub has no ports
xhci_hcd 0000:e6:00.0: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
xhci_hcd 0000:e6:00.0: xHCI Host Controller
xhci_hcd 0000:e6:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:e6:00.0: Host supports USB 3.0 SuperSpeed
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 6.6.49-0-lts xhci-hcd
usb usb5: SerialNumber: 0000:e6:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 6.6.49-0-lts xhci-hcd
usb usb6: SerialNumber: 0000:e6:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci_hcd 0000:e6:00.3: xHCI Host Controller
xhci_hcd 0000:e6:00.3: new USB bus registered, assigned bus number 7
xhci_hcd 0000:e6:00.3: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
xhci_hcd 0000:e6:00.3: xHCI Host Controller
xhci_hcd 0000:e6:00.3: new USB bus registered, assigned bus number 8
xhci_hcd 0000:e6:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 6.6.49-0-lts xhci-hcd
usb usb7: SerialNumber: 0000:e6:00.3
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 6.6.49-0-lts xhci-hcd
usb usb8: SerialNumber: 0000:e6:00.3
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
xhci_hcd 0000:e6:00.4: xHCI Host Controller
xhci_hcd 0000:e6:00.4: new USB bus registered, assigned bus number 9
xhci_hcd 0000:e6:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
xhci_hcd 0000:e6:00.4: xHCI Host Controller
xhci_hcd 0000:e6:00.4: new USB bus registered, assigned bus number 10
xhci_hcd 0000:e6:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 6.6.49-0-lts xhci-hcd
usb usb9: SerialNumber: 0000:e6:00.4
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 1 port detected
usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 6.6.49-0-lts xhci-hcd
usb usb10: SerialNumber: 0000:e6:00.4
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 1 port detected
libata version 3.00 loaded.
ahci 0000:04:00.0: version 3.0
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m512@0xdcb10000 port 0xdcb10100 irq 55
ata2: SATA max UDMA/133 abar m512@0xdcb10000 port 0xdcb10180 irq 55
usb 5-1: new high-speed USB device number 2 using xhci_hcd
usb 3-3: new high-speed USB device number 2 using xhci_hcd
usb 9-1: new full-speed USB device number 2 using xhci_hcd
ata1: SATA link down (SStatus 0 SControl 300)
usb 3-3: New USB device found, idVendor=0489, idProduct=e0cd, bcdDevice= 1.00
usb 3-3: New USB device strings: Mfr=5, Product=6, SerialNumber=7
usb 3-3: Product: Wireless_Device
usb 3-3: Manufacturer: MediaTek Inc.
usb 3-3: SerialNumber: 000000000
usb 5-1: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: Ultra Fit
usb 5-1: Manufacturer: SanDisk
usb 5-1: SerialNumber: 4C530001160224123284
usb-storage 5-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 5-1:1.0
usb 9-1: New USB device found, idVendor=046d, idProduct=c33c, bcdDevice=19.01
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-1: Product: G513 RGB MECHANICAL GAMING KEYBOARD
usb 9-1: Manufacturer: Logitech
usb 9-1: SerialNumber: 188939423532
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:00/input/input0
usbcore: registered new interface driver uas
hid: raw HID events driver (C) Jiri Kosina
tsc: Refined TSC clocksource calibration: 2694.937 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d88f69cfe, max_idle_ns: 440795256597 ns
clocksource: Switched to clocksource tsc
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech G513 RGB MECHANICAL GAMING KEYBOARD as /devices/pci0000:00/0000:00:08.3/0000:e6:00.4/usb9/9-1/9-1:1.0/0003:046D:C33C.0001/input/input1
hid-generic 0003:046D:C33C.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech G513 RGB MECHANICAL GAMING KEYBOARD] on usb-0000:e6:00.4-1/input0
input: Logitech G513 RGB MECHANICAL GAMING KEYBOARD Keyboard as /devices/pci0000:00/0000:00:08.3/0000:e6:00.4/usb9/9-1/9-1:1.1/0003:046D:C33C.0002/input/input2
hid-generic 0003:046D:C33C.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech G513 RGB MECHANICAL GAMING KEYBOARD] on usb-0000:e6:00.4-1/input1
scsi 2:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
sd 2:0:0:0: [sda] 121438208 512-byte logical blocks: (62.2 GB/57.9 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI removable disk
FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda2): mounted filesystem 6e5c4368-6b9a-cc48-a72b-c9de2403666c ro with ordered data mode. Quota mode: none.
EXT4-fs (sda2): unmounting filesystem 6e5c4368-6b9a-cc48-a72b-c9de2403666c.
Mounting boot media: ok.
Installing packages to root filesystem...
fbcon: Taking over console
Console: switching to colour frame buffer device 100x37
Installing packages to root filesystem: ok.
loop0: detected capacity change from 0 to 315960
acpi-tad ACPI000E:00: Missing _PRW
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: button: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [TZ01] (20 C)
tpm_crb MSFT0101:00: Disabling hwrng
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
snd_hda_intel 0000:e5:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:e5:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:e5:00.6: enabling device (0000 -> 0002)
Linux agpgart interface v0.103
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:e5:00.1/sound/card0/input7
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:e5:00.1/sound/card0/input8
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:e5:00.1/sound/card0/input9
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:e5:00.1/sound/card0/input10
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:e5:00.6/sound/card1/input11
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:e5:00.6/sound/card1/input12
[drm] amdgpu kernel modesetting enabled.
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
amdgpu 0000:e5:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (YELLOW_CARP 0x1002:0x1681 0x1002:0x0124 0xC0).
[drm] register mmio base: 0xDC700000
[drm] register mmio size: 524288
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
[drm] add ip block number 9
amdgpu 0000:e5:00.0: amdgpu: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 113-REMBRANDT-X37
[drm] VCN(0) decode is enabled in VM mode
[drm] VCN(0) encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
Console: switching to colour dummy device 80x25
amdgpu 0000:e5:00.0: vgaarb: deactivate vga console
amdgpu 0000:e5:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:e5:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
amdgpu 0000:e5:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
amdgpu 0000:e5:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=512M, BAR=512M
[drm] RAM width 128bits LPDDR5
[drm] amdgpu: 512M of VRAM memory ready
[drm] amdgpu: 7634M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F41FC00000).
[drm] Loading DMUB firmware via PSP: version=0x04000044
[drm] use_doorbell being set to: [true]
[drm] Found VCN firmware Version ENC: 1.31 DEC: 3 VEP: 0 Revision: 2
amdgpu 0000:e5:00.0: amdgpu: Will use PSP to load VCN firmware
[drm] reserve 0xa00000 from 0xf41e000000 for PSP TMR
amdgpu 0000:e5:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:e5:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:e5:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu 0000:e5:00.0: amdgpu: SMU is initialized successfully!
[drm] Display Core v3.2.247 initialized on DCN 3.1
[drm] DP-HDMI FRL PCON supported
[drm] DMUB hardware initialized: version=0x04000044
snd_hda_intel 0000:e5:00.1: bound 0000:e5:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
amdgpu: Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x1681:0x1002]
kfd kfd: amdgpu: added device 1002:1681
amdgpu 0000:e5:00.0: amdgpu: SE 1, SH per SE 2, CU per SH 6, active_cu_number 12
amdgpu 0000:e5:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
amdgpu 0000:e5:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:e5:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:e5:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:e5:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:e5:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:e5:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:e5:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:e5:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:e5:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:e5:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
amdgpu 0000:e5:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 8
amdgpu 0000:e5:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 8
amdgpu 0000:e5:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 8
amdgpu 0000:e5:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 8
[drm] Initialized amdgpu 3.54.0 20150101 for 0000:e5:00.0 on minor 1
fbcon: amdgpudrmfb (fb0) is primary device
[drm] DSC precompute is not needed.
[drm] REG_WAIT timeout 1us * 100000 tries - optc31_disable_crtc line:136
Console: switching to colour frame buffer device 320x90
amdgpu 0000:e5:00.0: [drm] fb0: amdgpudrmfb frame buffer device
ACPI: bus type thunderbolt registered
ccp 0000:e5:00.2: enabling device (0000 -> 0002)
ccp 0000:e5:00.2: tee enabled
ccp 0000:e5:00.2: psp enabled
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
r8169 0000:02:00.0 eth0: RTL8168g/8111g, 00:f1:f5:2d:bb:64, XID 4c0, IRQ 97
r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
mt7921e 0000:03:00.0: enabling device (0000 -> 0002)
mt7921e 0000:03:00.0: ASIC revision: 79610010
mt7921e 0000:03:00.0: HW/SW Version: 0x8a108a10, Build Time: 20240716150944a
Intel(R) 2.5G Ethernet Linux Driver
Copyright(c) 2018 Intel Corporation.
igc 0000:01:00.0: PCIe PTM not supported by PCIe bus/controller
mt7921e 0000:03:00.0: WM Firmware Version: ____010000, Build Time: 20240716151027
pps pps0: new PPS source ptp0
igc 0000:01:00.0 (unnamed net_device) (uninitialized): PHC added
igc 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
igc 0000:01:00.0 eth1: MAC: 00:f1:f5:2d:f6:50
input: PC Speaker as /devices/platform/pcspkr/input/input13
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: Failed to register coredump (-95)
Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20240716151445
Bluetooth: hci0: Device setup in 156322 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
NET: Registered PF_PACKET protocol family
wlan0: authenticate with 14:eb:b6:0c:2b:af
wlan0: send auth to 14:eb:b6:0c:2b:af (try 1/3)
wlan0: authenticated
wlan0: associate with 14:eb:b6:0c:2b:af (try 1/3)
wlan0: RX AssocResp from 14:eb:b6:0c:2b:af (capab=0x1431 status=0 aid=39)
wlan0: associated
sched: RT throttling activated
usb 9-1: USB disconnect, device number 2
usb 9-1: new full-speed USB device number 3 using xhci_hcd
usb 9-1: New USB device found, idVendor=046d, idProduct=c33c, bcdDevice=19.01
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-1: Product: G513 RGB MECHANICAL GAMING KEYBOARD
usb 9-1: Manufacturer: Logitech
usb 9-1: SerialNumber: 188939423532
input: Logitech G513 RGB MECHANICAL GAMING KEYBOARD as /devices/pci0000:00/0000:00:08.3/0000:e6:00.4/usb9/9-1/9-1:1.0/0003:046D:C33C.0003/input/input14
hid-generic 0003:046D:C33C.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech G513 RGB MECHANICAL GAMING KEYBOARD] on usb-0000:e6:00.4-1/input0
input: Logitech G513 RGB MECHANICAL GAMING KEYBOARD Keyboard as /devices/pci0000:00/0000:00:08.3/0000:e6:00.4/usb9/9-1/9-1:1.1/0003:046D:C33C.0004/input/input15
hid-generic 0003:046D:C33C.0004: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech G513 RGB MECHANICAL GAMING KEYBOARD] on usb-0000:e6:00.4-1/input1
usb 9-1: USB disconnect, device number 3
usb 9-1: new full-speed USB device number 4 using xhci_hcd
usb 9-1: New USB device found, idVendor=046d, idProduct=c33c, bcdDevice=19.01
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-1: Product: G513 RGB MECHANICAL GAMING KEYBOARD
usb 9-1: Manufacturer: Logitech
usb 9-1: SerialNumber: 188939423532
input: Logitech G513 RGB MECHANICAL GAMING KEYBOARD as /devices/pci0000:00/0000:00:08.3/0000:e6:00.4/usb9/9-1/9-1:1.0/0003:046D:C33C.0005/input/input18
hid-generic 0003:046D:C33C.0005: input,hidraw0: USB HID v1.11 Keyboard [Logitech G513 RGB MECHANICAL GAMING KEYBOARD] on usb-0000:e6:00.4-1/input0
input: Logitech G513 RGB MECHANICAL GAMING KEYBOARD Keyboard as /devices/pci0000:00/0000:00:08.3/0000:e6:00.4/usb9/9-1/9-1:1.1/0003:046D:C33C.0006/input/input19
hid-generic 0003:046D:C33C.0006: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech G513 RGB MECHANICAL GAMING KEYBOARD] on usb-0000:e6:00.4-1/input1
usb 9-1: USB disconnect, device number 4
usb 9-1: new full-speed USB device number 5 using xhci_hcd
usb 9-1: New USB device found, idVendor=046d, idProduct=c33c, bcdDevice=19.01
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-1: Product: G513 RGB MECHANICAL GAMING KEYBOARD
usb 9-1: Manufacturer: Logitech
usb 9-1: SerialNumber: 188939423532
input: Logitech G513 RGB MECHANICAL GAMING KEYBOARD as /devices/pci0000:00/0000:00:08.3/0000:e6:00.4/usb9/9-1/9-1:1.0/0003:046D:C33C.0007/input/input22
hid-generic 0003:046D:C33C.0007: input,hidraw0: USB HID v1.11 Keyboard [Logitech G513 RGB MECHANICAL GAMING KEYBOARD] on usb-0000:e6:00.4-1/input0
input: Logitech G513 RGB MECHANICAL GAMING KEYBOARD Keyboard as /devices/pci0000:00/0000:00:08.3/0000:e6:00.4/usb9/9-1/9-1:1.1/0003:046D:C33C.0008/input/input23
hid-generic 0003:046D:C33C.0008: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech G513 RGB MECHANICAL GAMING KEYBOARD] on usb-0000:e6:00.4-1/input1
usb 9-1: USB disconnect, device number 5
usb 9-1: new full-speed USB device number 6 using xhci_hcd
usb 9-1: New USB device found, idVendor=046d, idProduct=c33c, bcdDevice=19.01
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-1: Product: G513 RGB MECHANICAL GAMING KEYBOARD
usb 9-1: Manufacturer: Logitech
usb 9-1: SerialNumber: 188939423532
input: Logitech G513 RGB MECHANICAL GAMING KEYBOARD as /devices/pci0000:00/0000:00:08.3/0000:e6:00.4/usb9/9-1/9-1:1.0/0003:046D:C33C.0009/input/input26
hid-generic 0003:046D:C33C.0009: input,hidraw0: USB HID v1.11 Keyboard [Logitech G513 RGB MECHANICAL GAMING KEYBOARD] on usb-0000:e6:00.4-1/input0
input: Logitech G513 RGB MECHANICAL GAMING KEYBOARD Keyboard as /devices/pci0000:00/0000:00:08.3/0000:e6:00.4/usb9/9-1/9-1:1.1/0003:046D:C33C.000A/input/input27
hid-generic 0003:046D:C33C.000A: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech G513 RGB MECHANICAL GAMING KEYBOARD] on usb-0000:e6:00.4-1/input1
usb 9-1: USB disconnect, device number 6