dmesg - pepo
microcode: updated early: 0x84 -> 0xf4, date = 2023-02-23
Linux version 6.5.0-9-generic (buildd@bos03-amd64-043) (x86_64-linux-gnu-gcc-13 (Ubuntu 13.2.0-4ubuntu3) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.41) #9-Ubuntu SMP PREEMPT_DYNAMIC Sat Oct 7 01:35:40 UTC 2023 (Ubuntu 6.5.0-9.9-generic 6.5.3)
Command line: BOOT_IMAGE=/casper/vmlinuz layerfs-path=minimal.standard.live.squashfs --- quiet splash
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000082d86fff] usable
BIOS-e820: [mem 0x0000000082d87000-0x0000000082d87fff] ACPI NVS
BIOS-e820: [mem 0x0000000082d88000-0x0000000082d88fff] reserved
BIOS-e820: [mem 0x0000000082d89000-0x000000008e26dfff] usable
BIOS-e820: [mem 0x000000008e26e000-0x000000008e729fff] reserved
BIOS-e820: [mem 0x000000008e72a000-0x000000008e75dfff] ACPI data
BIOS-e820: [mem 0x000000008e75e000-0x000000008eb7dfff] ACPI NVS
BIOS-e820: [mem 0x000000008eb7e000-0x000000008f7fefff] reserved
BIOS-e820: [mem 0x000000008f7ff000-0x000000008f7fffff] usable
BIOS-e820: [mem 0x000000008f800000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000086effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x7652e018-0x7654da57] usable ==> usable
e820: update [mem 0x7652e018-0x7654da57] usable ==> usable
e820: update [mem 0x7651d018-0x7652de57] usable ==> usable
e820: update [mem 0x7651d018-0x7652de57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000007651d017] usable
reserve setup_data: [mem 0x000000007651d018-0x000000007652de57] usable
reserve setup_data: [mem 0x000000007652de58-0x000000007652e017] usable
reserve setup_data: [mem 0x000000007652e018-0x000000007654da57] usable
reserve setup_data: [mem 0x000000007654da58-0x0000000082d86fff] usable
reserve setup_data: [mem 0x0000000082d87000-0x0000000082d87fff] ACPI NVS
reserve setup_data: [mem 0x0000000082d88000-0x0000000082d88fff] reserved
reserve setup_data: [mem 0x0000000082d89000-0x000000008e26dfff] usable
reserve setup_data: [mem 0x000000008e26e000-0x000000008e729fff] reserved
reserve setup_data: [mem 0x000000008e72a000-0x000000008e75dfff] ACPI data
reserve setup_data: [mem 0x000000008e75e000-0x000000008eb7dfff] ACPI NVS
reserve setup_data: [mem 0x000000008eb7e000-0x000000008f7fefff] reserved
reserve setup_data: [mem 0x000000008f7ff000-0x000000008f7fffff] usable
reserve setup_data: [mem 0x000000008f800000-0x000000008fffffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000086effffff] usable
efi: EFI v2.6 by American Megatrends
efi: ACPI 2.0=0x8eb03000 ACPI=0x8eb03000 SMBIOS=0x8f66c000 ESRT=0x892abf98 MEMATTR=0x89269018 MOKvar=0x8eddb000 INITRD=0x82e68998 RNG=0x8e75d018
random: crng init done
efi: Remove mem34: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
e820: remove [mem 0xe0000000-0xefffffff] reserved
efi: Not removing mem35: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
efi: Not removing mem36: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
efi: Not removing mem37: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
efi: Not removing mem38: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
efi: Remove mem39: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
e820: remove [mem 0xff000000-0xffffffff] reserved
secureboot: Secure boot disabled
SMBIOS 2.8 present.
DMI: Micro-Star International Co., Ltd. MS-7B45/Z370 GAMING PRO CARBON (MS-7B45), BIOS A.51 03/29/2018
tsc: Detected 3700.000 MHz processor
tsc: Detected 3699.850 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x86f000 max_arch_pfn = 0x400000000
MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x8f800 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000892abf98 to 0x00000000892abfd0.
e820: update [mem 0x892ab000-0x892abfff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x7654e000-0x7cc88fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008EB03000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008EB030A8 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000008EB2BB88 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000008EB03218 02896F (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000008EB7DF00 000040
ACPI: APIC 0x000000008EB2BCA0 0000F4 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000008EB2BD98 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000008EB2BDE0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000008EB2BE80 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008EB2BEC0 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000008EB2C268 003158 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000008EB2F3C0 002611 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x000000008EB319D8 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000008EB31A10 0011A2 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x000000008EB32BB8 000A2B (v02 INTEL xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x000000008EB335E8 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000008EB33630 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000008EB34DE0 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000008EB34E78 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
ACPI: SSDT 0x000000008EB34FC0 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000008EB35260 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x000000008EB38268 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
ACPI: DBGP 0x000000008EB38780 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000008EB387B8 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: BGRT 0x000000008EB38810 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WSMT 0x000000008EB38848 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Reserving FACP table memory at [mem 0x8eb2bb88-0x8eb2bc9b]
ACPI: Reserving DSDT table memory at [mem 0x8eb03218-0x8eb2bb86]
ACPI: Reserving FACS table memory at [mem 0x8eb7df00-0x8eb7df3f]
ACPI: Reserving APIC table memory at [mem 0x8eb2bca0-0x8eb2bd93]
ACPI: Reserving FPDT table memory at [mem 0x8eb2bd98-0x8eb2bddb]
ACPI: Reserving FIDT table memory at [mem 0x8eb2bde0-0x8eb2be7b]
ACPI: Reserving MCFG table memory at [mem 0x8eb2be80-0x8eb2bebb]
ACPI: Reserving SSDT table memory at [mem 0x8eb2bec0-0x8eb2c262]
ACPI: Reserving SSDT table memory at [mem 0x8eb2c268-0x8eb2f3bf]
ACPI: Reserving SSDT table memory at [mem 0x8eb2f3c0-0x8eb319d0]
ACPI: Reserving HPET table memory at [mem 0x8eb319d8-0x8eb31a0f]
ACPI: Reserving SSDT table memory at [mem 0x8eb31a10-0x8eb32bb1]
ACPI: Reserving SSDT table memory at [mem 0x8eb32bb8-0x8eb335e2]
ACPI: Reserving UEFI table memory at [mem 0x8eb335e8-0x8eb33629]
ACPI: Reserving SSDT table memory at [mem 0x8eb33630-0x8eb34ddd]
ACPI: Reserving LPIT table memory at [mem 0x8eb34de0-0x8eb34e73]
ACPI: Reserving SSDT table memory at [mem 0x8eb34e78-0x8eb34fb8]
ACPI: Reserving SSDT table memory at [mem 0x8eb34fc0-0x8eb3525e]
ACPI: Reserving SSDT table memory at [mem 0x8eb35260-0x8eb38261]
ACPI: Reserving SSDT table memory at [mem 0x8eb38268-0x8eb3877e]
ACPI: Reserving DBGP table memory at [mem 0x8eb38780-0x8eb387b3]
ACPI: Reserving DBG2 table memory at [mem 0x8eb387b8-0x8eb3880b]
ACPI: Reserving BGRT table memory at [mem 0x8eb38810-0x8eb38847]
ACPI: Reserving WSMT table memory at [mem 0x8eb38848-0x8eb3886f]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000086effffff]
NODE_DATA(0) allocated [mem 0x86efd5000-0x86effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000086effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x0000000082d86fff]
node 0: [mem 0x0000000082d89000-0x000000008e26dfff]
node 0: [mem 0x000000008f7ff000-0x000000008f7fffff]
node 0: [mem 0x0000000100000000-0x000000086effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000086effffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 98 pages in unavailable ranges
On node 0, zone DMA32: 2 pages in unavailable ranges
On node 0, zone DMA32: 5521 pages in unavailable ranges
On node 0, zone Normal: 2048 pages in unavailable ranges
On node 0, zone Normal: 4096 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x1808
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x89227000-0x89268fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x7651d000-0x7651dfff]
PM: hibernation: Registered nosave memory: [mem 0x7652d000-0x7652dfff]
PM: hibernation: Registered nosave memory: [mem 0x7652e000-0x7652efff]
PM: hibernation: Registered nosave memory: [mem 0x7654d000-0x7654dfff]
PM: hibernation: Registered nosave memory: [mem 0x82d87000-0x82d87fff]
PM: hibernation: Registered nosave memory: [mem 0x82d88000-0x82d88fff]
PM: hibernation: Registered nosave memory: [mem 0x89227000-0x89268fff]
PM: hibernation: Registered nosave memory: [mem 0x892ab000-0x892abfff]
PM: hibernation: Registered nosave memory: [mem 0x8e26e000-0x8e729fff]
PM: hibernation: Registered nosave memory: [mem 0x8e72a000-0x8e75dfff]
PM: hibernation: Registered nosave memory: [mem 0x8e75e000-0x8eb7dfff]
PM: hibernation: Registered nosave memory: [mem 0x8eb7e000-0x8f7fefff]
PM: hibernation: Registered nosave memory: [mem 0x8f800000-0x8fffffff]
PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[mem 0x90000000-0xfdffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
Kernel command line: BOOT_IMAGE=/casper/vmlinuz layerfs-path=minimal.standard.live.squashfs --- quiet splash
Unknown kernel command line parameters "--- splash BOOT_IMAGE=/casper/vmlinuz layerfs-path=minimal.standard.live.squashfs", will be passed to user space.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 8245795
Policy zone: Normal
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
software IO TLB: area num 16.
Memory: 32613132K/33507364K available (20480K kernel code, 4268K rwdata, 13520K rodata, 4788K init, 17396K bss, 893972K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 55224 entries in 216 pages
ftrace: allocated 216 pages with 4 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=14799400)
x86/cpu: SGX disabled by BIOS.
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
RETBleed: Mitigation: IBRS
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
MDS: Mitigation: Clear CPU buffers
TAA: Mitigation: TSX disabled
MMIO Stale Data: Mitigation: Clear CPU buffers
SRBDS: Mitigation: Microcode
GDS: Mitigation: Microcode
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
Freeing SMP alternatives memory: 44K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity
landlock: Up and running.
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
smpboot: CPU0: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xa)
RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
signal: max sigframe size: 2032
Estimated ratio of average max frequency by base frequency (times 1024): 1217
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
MDS CPU bug present and SMT on, data leak possible. See for more details.
MMIO Stale Data CPU bug present and SMT on, data leak possible. See for more details.
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 12 processors activated (88796.40 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x82d87000-0x82d87fff] (4096 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0x8e75e000-0x8eb7dfff] (4325376 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 18:14:34, date: 2024-10-21
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1729534473.064:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
fbcon: Taking over console
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 11 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8CF201361800 00077A (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8CF2013C1000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8CF201694000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8CF2013C0C00 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8CF2013C3C00 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: \_SB_.PCI0.PEG0.PG00: New power resource
ACPI: \_SB_.PCI0.PEG1.PG01: New power resource
ACPI: \_SB_.PCI0.PEG2.PG02: New power resource
ACPI: \_TZ_.FN00: New power resource
ACPI: \_TZ_.FN01: New power resource
ACPI: \_TZ_.FN02: New power resource
ACPI: \_TZ_.FN03: New power resource
ACPI: \_TZ_.FN04: New power resource
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR DPC]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0x2000000000-0x2fffffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0x2ffff27000-0x2ffff27fff 64bit]
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x2ffff10000-0x2ffff1ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0x2ffff26000-0x2ffff26fff 64bit]
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x2ffff25000-0x2ffff25fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf524000-0xdf525fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf527000-0xdf5270ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf526000-0xdf5267ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:a296] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a2c9] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf520000-0xdf523fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0x2ffff20000-0x2ffff23fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0x2ffff00000-0x2ffff0ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0x2ffff24000-0x2ffff240ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf500000-0xdf51ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [10de:1b80] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x2fe0000000-0x2fefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0x2ff0000000-0x2ff1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.0: BAR 1: assigned to efifb
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x2 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0x2fe0000000-0x2ff1ffffff 64bit pref]
pci 0000:02:00.0: [144d:a808] type 00 class 0x010802
pci 0000:02:00.0: reg 0x10: [mem 0xdf400000-0xdf403fff 64bit]
pci 0000:02:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:1b.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.0: bridge window [mem 0xdf400000-0xdf4fffff]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xdf300000-0xdf307fff 64bit]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x2 link at 0000:00:1c.4 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:05:00.0: [8086:272b] type 00 class 0x028000
pci 0000:05:00.0: reg 0x10: [mem 0xdf200000-0xdf203fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:1c.6 (capable of 15.753 Gb/s with 16.0 GT/s PCIe x1 link)
pci 0000:00:1c.6: PCI bridge to [bus 05]
pci 0000:00:1c.6: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:06:00.0: [144d:a804] type 00 class 0x010802
pci 0000:06:00.0: reg 0x10: [mem 0xdf100000-0xdf103fff 64bit]
pci 0000:06:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:1d.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
pci 0000:00:1d.0: PCI bridge to [bus 06]
pci 0000:00:1d.0: bridge window [mem 0xdf100000-0xdf1fffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 10
ACPI: PCI: Interrupt link LNKC configured for IRQ 11
ACPI: PCI: Interrupt link LNKD configured for IRQ 11
ACPI: PCI: Interrupt link LNKE configured for IRQ 11
ACPI: PCI: Interrupt link LNKF configured for IRQ 11
ACPI: PCI: Interrupt link LNKG configured for IRQ 11
ACPI: PCI: Interrupt link LNKH configured for IRQ 11
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
efivars: Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7651d018-0x77ffffff]
e820: reserve RAM buffer [mem 0x7652e018-0x77ffffff]
e820: reserve RAM buffer [mem 0x82d87000-0x83ffffff]
e820: reserve RAM buffer [mem 0x89227000-0x8bffffff]
e820: reserve RAM buffer [mem 0x892ab000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8e26e000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8f800000-0x8fffffff]
e820: reserve RAM buffer [mem 0x86f000000-0x86fffffff]
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a0f] has been reserved
system 00:00: [io 0x0a10-0x0a1f] has been reserved
system 00:00: [io 0x0a20-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [io 0xff00-0xfffe] has been reserved
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0x2fe0000000-0x2ff1ffffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.0: bridge window [mem 0xdf400000-0xdf4fffff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:00:1c.6: PCI bridge to [bus 05]
pci 0000:00:1c.6: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1d.0: PCI bridge to [bus 06]
pci 0000:00:1d.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0x2000000000-0x2fffffffff window]
pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0x2fe0000000-0x2ff1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xdf400000-0xdf4fffff]
pci_bus 0000:04: resource 1 [mem 0xdf300000-0xdf3fffff]
pci_bus 0000:05: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:06: resource 1 [mem 0xdf100000-0xdf1fffff]
pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
pci 0000:04:00.0: PME# does not work under D0, disabling it
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0000000085227000-0x0000000089227000] (64MB)
Trying to unpack rootfs image as initramfs...
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.38)
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: Ignoring BGRT: unexpected or invalid BMP data
efifb: framebuffer at 0x2fe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: button: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: button: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: thermal: Thermal Zone [TZ01] (30 C)
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: setting system clock to 2024-10-21T18:14:34 UTC (1729534474)
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
i2c_dev: i2c /dev entries driver
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
resource: resource sanity check: requesting [mem 0x00000000fdffe800-0x00000000fe0007ff], which spans more than pnp 00:06 [mem 0xfdb00000-0xfdffffff]
caller get_primary_reg_base+0x4f/0xb0 mapping multiple BARs
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
Freeing initrd memory: 105708K
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
Key type dns_resolver registered
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (508252749, 308414)->(516445563, -7884400)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 68146f2d536c7f9efbc818156af57d8945afe4ba'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
blacklist: Loading compiled-in revocation X.509 certificates
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 68146f2d536c7f9efbc818156af57d8945afe4ba'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 12:680:241
memory memory119: hash matches
RAS: Correctable Errors collector initialized.
clk: Disabling unused clocks
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 4788K
Write protecting the kernel read-only data: 34816k
Freeing unused kernel image (rodata/data gap) memory: 816K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
---
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/casper/vmlinuz
layerfs-path=minimal.standard.live.squashfs
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
ahci 0000:00:17.0: version 3.0
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.5.0-9-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.5.0-9-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
cryptd: max_cpu_qlen set to 1000
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
nvme nvme1: pci function 0000:02:00.0
nvme nvme0: pci function 0000:06:00.0
ACPI: bus type drm_connector registered
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
nvme nvme1: missing or invalid SUBNQN field.
nvme nvme1: Shutdown timeout set to 8 seconds
nvme nvme0: 7/0/0 default/read/poll queues
nvme nvme1: 12/0/0 default/read/poll queues
nvme1n1: p1 p2 p3
xhci_hcd 0000:04:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:04:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.5.0-9-generic xhci-hcd
usb usb3: SerialNumber: 0000:04:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.5.0-9-generic xhci-hcd
usb usb4: SerialNumber: 0000:04:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
nvme0n1: p1
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf526000 port 0xdf526100 irq 126
ata2: SATA max UDMA/133 abar m2048@0xdf526000 port 0xdf526180 irq 126
ata3: SATA max UDMA/133 abar m2048@0xdf526000 port 0xdf526200 irq 126
ata4: SATA max UDMA/133 abar m2048@0xdf526000 port 0xdf526280 irq 126
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
usb 1-2: new high-speed USB device number 2 using xhci_hcd
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 30:9c:23:a5:ac:63
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
tsc: Refined TSC clocksource calibration: 3695.998 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d2284b57, max_idle_ns: 881590451434 ns
clocksource: Switched to clocksource tsc
usb 1-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.01
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: 4-Port USB 2.1 Hub
usb 1-2: Manufacturer: Generic
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=0930, idProduct=6545, bcdDevice= 1.00
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: DataTraveler 3.0
usb 2-2: Manufacturer: Kingston
usb 2-2: SerialNumber: 0019E06B4A04EE702767D488
usb 1-7: new full-speed USB device number 3 using xhci_hcd
MXM: GUID detected in BIOS
Console: switching to colour dummy device 80x25
nouveau 0000:01:00.0: vgaarb: deactivate vga console
nouveau 0000:01:00.0: NVIDIA GP104 (134000a1)
nouveau 0000:01:00.0: bios: version 86.04.60.00.02
nouveau 0000:01:00.0: pmu: firmware unavailable
nouveau 0000:01:00.0: fb: 8192 MiB GDDR5X
usb 1-7: New USB device found, idVendor=8087, idProduct=0036, bcdDevice= 0.00
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
nouveau 0000:01:00.0: DRM: VRAM: 8192 MiB
nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
nouveau 0000:01:00.0: DRM: BIT table 'A' not found
nouveau 0000:01:00.0: DRM: BIT table 'L' not found
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.1
nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f42 00020030
nouveau 0000:01:00.0: DRM: DCB outp 01: 04811f96 04600020
nouveau 0000:01:00.0: DRM: DCB outp 02: 04011f92 00020020
nouveau 0000:01:00.0: DRM: DCB outp 03: 04822f86 04600010
nouveau 0000:01:00.0: DRM: DCB outp 04: 04022f82 00020010
nouveau 0000:01:00.0: DRM: DCB outp 06: 02033f62 00020010
nouveau 0000:01:00.0: DRM: DCB outp 07: 02844f76 04600020
nouveau 0000:01:00.0: DRM: DCB outp 08: 02044f72 00020020
nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031
nouveau 0000:01:00.0: DRM: DCB conn 01: 02000146
nouveau 0000:01:00.0: DRM: DCB conn 02: 01000246
nouveau 0000:01:00.0: DRM: DCB conn 03: 00010361
nouveau 0000:01:00.0: DRM: DCB conn 04: 00020446
nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
usb 1-2.1: new high-speed USB device number 4 using xhci_hcd
fbcon: nouveaudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
nouveau 0000:01:00.0: DRM: Disabling PCI power management to avoid bug
usb 1-2.1: New USB device found, idVendor=046d, idProduct=0892, bcdDevice= 0.19
usb 1-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=1
usb 1-2.1: Product: HD Pro Webcam C920
usb 1-2.1: SerialNumber: A6C6BDDF
usb 1-2.2: new full-speed USB device number 5 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=05ac, idProduct=029f, bcdDevice= 4.20
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.2: Product: Magic Keyboard with Touch ID and Numeric Keypad
usb 1-2.2: Manufacturer: Apple Inc.
usb 1-2.2: SerialNumber: F0T130200FJ18DMAQ
usb 1-2.3: new full-speed USB device number 6 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=046d, idProduct=c547, bcdDevice= 4.02
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Receiver
usb 1-2.3: Manufacturer: Logitech
usb 1-2.4: new high-speed USB device number 7 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 1-2.4: Product: USB 10/100/1000 LAN
usb 1-2.4: Manufacturer: Realtek
usb 1-2.4: SerialNumber: 000001
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new device driver r8152-cfgselector
usbhid 1-2.2:1.2: couldn't find an input interrupt endpoint
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:05AC:029F.0001: hiddev0,hidraw0: USB HID v1.10 Device [Apple Inc. Magic Keyboard with Touch ID and Numeric Keypad] on usb-0000:00:14.0-2.2/input0
input: Apple Inc. Magic Keyboard with Touch ID and Numeric Keypad Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:05AC:029F.0002/input/input3
hid-generic 0003:05AC:029F.0002: input,hiddev1,hidraw1: USB HID v1.10 Keyboard [Apple Inc. Magic Keyboard with Touch ID and Numeric Keypad] on usb-0000:00:14.0-2.2/input1
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:046D:C547.0003/input/input5
hid-generic 0003:046D:C547.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2.3/input0
input: Logitech USB Receiver Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:046D:C547.0004/input/input6
r8152-cfgselector 1-2.4: reset high-speed USB device number 7 using xhci_hcd
hid-generic 0003:046D:C547.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2.3/input1
hid-generic 0003:046D:C547.0005: hiddev2,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.3/input2
apple 0003:05AC:029F.0001: fixing up Magic Keyboard battery report descriptor
apple 0003:05AC:029F.0001: Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling
input: Apple Inc. Magic Keyboard with Touch ID and Numeric Keypad as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:05AC:029F.0001/input/input7
apple 0003:05AC:029F.0001: input,hiddev0,hidraw0: USB HID v1.10 Keyboard [Apple Inc. Magic Keyboard with Touch ID and Numeric Keypad] on usb-0000:00:14.0-2.2/input0
r8152 1-2.4:1.0: load rtl8153a-4 v2 02/07/20 successfully
input: Apple Inc. Magic Keyboard with Touch ID and Numeric Keypad as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:05AC:029F.0002/input/input8
r8152 1-2.4:1.0 eth0: v1.12.13
usbcore: registered new interface driver r8152
usbcore: registered new interface driver cdc_ether
r8152 1-2.4:1.0 enx00e04c683eb5: renamed from eth0
apple 0003:05AC:029F.0002: input,hiddev1,hidraw1: USB HID v1.10 Keyboard [Apple Inc. Magic Keyboard with Touch ID and Numeric Keypad] on usb-0000:00:14.0-2.2/input1
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
workqueue: drm_fb_helper_damage_work [drm_kms_helper] hogged CPU for >10000us 4 times, consider switching to WQ_UNBOUND
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host4: usb-storage 2-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
raid6: avx2x4 gen() 36945 MB/s
raid6: avx2x2 gen() 48202 MB/s
raid6: avx2x1 gen() 40764 MB/s
raid6: using algorithm avx2x2 gen() 48202 MB/s
raid6: .... xor() 28833 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
scsi 4:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] 60995328 512-byte logical blocks: (31.2 GB/29.1 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sda] No Caching mode page found
sd 4:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 4:0:0:0: [sda] Attached SCSI removable disk
evict_inodes inode 000000003f4f18bf, i_count = 1, was skipped!
evict_inodes inode 0000000011018072, i_count = 1, was skipped!
evict_inodes inode 00000000b472ed01, i_count = 1, was skipped!
evict_inodes inode 000000000d8486bd, i_count = 1, was skipped!
loop0: detected capacity change from 0 to 3387216
loop1: detected capacity change from 0 to 845352
loop2: detected capacity change from 0 to 1590344
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
systemd[1]: Inserted module 'autofs4'
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
systemd[1]: systemd 253.5-1ubuntu6 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
systemd[1]: Queued start job for default target graphical.target.
systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
systemd[1]: Created slice user.slice - User and Session Slice.
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
systemd[1]: Reached target remote-fs.target - Remote File Systems.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target swap.target - Swaps.
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
systemd[1]: Listening on syslog.socket - Syslog Socket.
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Socket.
systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Finished blk-availability.service - Availability of block devices.
systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting [email protected] - Load Kernel Module configfs...
systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
systemd[1]: Starting [email protected] - Load Kernel Module drm...
systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
systemd[1]: Starting [email protected] - Load Kernel Module fuse...
systemd[1]: Starting [email protected] - Load Kernel Module loop...
pstore: Using crash dump compression: deflate
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
pstore: Registered efi_pstore as persistent store backend
systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module drm.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module fuse.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module loop.
systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
systemd[1]: Starting cloud-init-local.service - Initial cloud-init job (pre-networking)...
systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
systemd-journald[1199]: Collecting audit messages is disabled.
systemd[1]: Starting systemd-sysusers.service - Create System Users...
lp: driver loaded but no devices found
systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
ppdev: user-space parallel port driver
systemd[1]: Started systemd-journald.service - Journal Service.
systemd-journald[1199]: Received client request to flush runtime journal.
EDAC ie31200: No ECC support
usbcore: registered new device driver apple-mfi-fastcharge
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
pci 0000:00:1f.1: [8086:a2a0] type 00 class 0x058000
pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit]
mc: Linux media interface: v0.10
mei_me 0000:00:16.0: enabling device (0004 -> 0006)
i2c i2c-17: 4/4 memory slots populated (from DMI)
i2c i2c-17: Successfully instantiated SPD at 0x50
i2c i2c-17: Successfully instantiated SPD at 0x51
i2c i2c-17: Successfully instantiated SPD at 0x52
i2c i2c-17: Successfully instantiated SPD at 0x53
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
videodev: Linux video capture interface: v2.00
ee1004 17-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
ee1004 17-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
ee1004 17-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
ee1004 17-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:05:00.0: enabling device (0000 -> 0002)
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
iwlwifi 0000:05:00.0: Detected crf-id 0x2001910, cnv-id 0x2001910 wfpm id 0x80000000
iwlwifi 0000:05:00.0: PCI dev 272b/00f4, rev=0x472, rfid=0x112200
iwlwifi 0000:05:00.0: Direct firmware load for iwlwifi-gl-c0-fm-c0-83.ucode failed with error -2
iwlwifi 0000:05:00.0: Direct firmware load for iwlwifi-gl-c0-fm-c0-82.ucode failed with error -2
iwlwifi 0000:05:00.0: Direct firmware load for iwlwifi-gl-c0-fm-c0-81.ucode failed with error -2
iwlwifi 0000:05:00.0: Direct firmware load for iwlwifi-gl-c0-fm-c0-80.ucode failed with error -2
iwlwifi 0000:05:00.0: no suitable firmware found!
iwlwifi 0000:05:00.0: minimum version required: iwlwifi-gl-c0-fm-c0-80
iwlwifi 0000:05:00.0: maximum version supported: iwlwifi-gl-c0-fm-c0-83
iwlwifi 0000:05:00.0: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
gspca_main: v2.14.0 registered
usbcore: registered new interface driver btusb
Bluetooth: hci0: Device revision is 0
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is disabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Bootloader timestamp 2022.18 buildtype 1 build 16362
Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-0291-0291.sfi (-2)
Bluetooth: hci0: Reading supported features failed (-56)
Bluetooth: hci0: Error reading debug features
gspca_main: vc032x-2.14.0 probing 046d:0892
Bluetooth: hci0: Failed to read MSFT supported features (-56)
gspca_vc032x: reg_r err -32
vc032x: probe of 1-2.1:1.0 failed with error -32
usbcore: registered new interface driver vc032x
usb 1-2.1: Found UVC 1.00 device HD Pro Webcam C920 (046d:0892)
usbcore: registered new interface driver uvcvideo
intel_tcc_cooling: Programmable TCC Offset detected
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain dram
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input10
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input11
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
usbcore: registered new interface driver snd-usb-audio
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
spl: loading out-of-tree module taints kernel.
zfs: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
zfs: module license taints kernel.
ZFS: Loaded module v2.2.0~rc3-0ubuntu4, ZFS pool version 5000, ZFS filesystem version 5
loop3: detected capacity change from 0 to 8
loop4: detected capacity change from 0 to 151352
loop5: detected capacity change from 0 to 492560
loop6: detected capacity change from 0 to 22944
loop7: detected capacity change from 0 to 1017816
loop8: detected capacity change from 0 to 187776
loop9: detected capacity change from 0 to 21536
loop10: detected capacity change from 0 to 83672
loop11: detected capacity change from 0 to 904
loop12: detected capacity change from 0 to 268184
audit: type=1400 audit(1729534560.239:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.ubuntu-desktop-installer" pid=1776 comm="apparmor_parser"
audit: type=1400 audit(1729534560.307:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/20290/usr/lib/snapd/snap-confine" pid=1771 comm="apparmor_parser"
audit: type=1400 audit(1729534560.307:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/20290/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1771 comm="apparmor_parser"
audit: type=1400 audit(1729534560.411:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.connect-plug-host-hunspell" pid=1780 comm="apparmor_parser"
audit: type=1400 audit(1729534560.427:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.post-refresh" pid=1782 comm="apparmor_parser"
audit: type=1400 audit(1729534560.431:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.disconnect-plug-host-hunspell" pid=1781 comm="apparmor_parser"
audit: type=1400 audit(1729534560.443:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.configure" pid=1779 comm="apparmor_parser"
audit: type=1400 audit(1729534560.475:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.firefox" pid=1777 comm="apparmor_parser"
audit: type=1400 audit(1729534560.483:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.geckodriver" pid=1778 comm="apparmor_parser"
audit: type=1400 audit(1729534560.707:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firmware-updater.hook.configure" pid=1786 comm="apparmor_parser"
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
loop13: detected capacity change from 0 to 8
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb 1-2.1: reset high-speed USB device number 4 using xhci_hcd
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
workqueue: drm_fb_helper_damage_work [drm_kms_helper] hogged CPU for >10000us 8 times, consider switching to WQ_UNBOUND
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
workqueue: drm_fb_helper_damage_work [drm_kms_helper] hogged CPU for >10000us 16 times, consider switching to WQ_UNBOUND
kauditd_printk_skb: 45 callbacks suppressed
audit: type=1400 audit(1729534575.675:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/20290/usr/lib/snapd/snap-confine" pid=2263 comm="apparmor_parser"
audit: type=1400 audit(1729534575.699:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/20290/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2263 comm="apparmor_parser"
audit: type=1400 audit(1729534575.799:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.firefox.hook.disconnect-plug-host-hunspell" pid=2270 comm="apparmor_parser"
audit: type=1400 audit(1729534575.799:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.firefox.hook.connect-plug-host-hunspell" pid=2269 comm="apparmor_parser"
audit: type=1400 audit(1729534575.831:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.firefox.hook.configure" pid=2268 comm="apparmor_parser"
audit: type=1400 audit(1729534575.839:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.firefox.hook.post-refresh" pid=2271 comm="apparmor_parser"
audit: type=1400 audit(1729534575.991:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.firefox" pid=2265 comm="apparmor_parser"
audit: type=1400 audit(1729534576.223:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.firefox.geckodriver" pid=2267 comm="apparmor_parser"
audit: type=1400 audit(1729534576.239:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.firefox.firefox" pid=2266 comm="apparmor_parser"
audit: type=1400 audit(1729534576.615:66): apparmor="DENIED" operation="open" class="file" profile="snap-update-ns.firefox" name="/var/lib/" pid=2289 comm="6" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
workqueue: drm_fb_helper_damage_work [drm_kms_helper] hogged CPU for >10000us 32 times, consider switching to WQ_UNBOUND
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
systemd-journald[1199]: Time jumped backwards, rotating.
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
kauditd_printk_skb: 1 callbacks suppressed
audit: type=1400 audit(1729534595.362:68): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=2583 comm="snap-confine" capability=12 capname="net_admin"
audit: type=1400 audit(1729534595.362:69): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=2583 comm="snap-confine" capability=38 capname="perfmon"
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
audit: type=1400 audit(1729534602.198:70): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=3061 comm="snap-confine" capability=12 capname="net_admin"
audit: type=1400 audit(1729534602.198:71): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=3061 comm="snap-confine" capability=38 capname="perfmon"
rfkill: input handler disabled
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
Btrfs loaded, zoned=yes, fsverity=yes
block sda: the capability attribute has been deprecated.
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
audit: type=1400 audit(1729534724.943:72): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=5484 comm="snap-confine" capability=12 capname="net_admin"
audit: type=1400 audit(1729534724.943:73): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=5484 comm="snap-confine" capability=38 capname="perfmon"
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
audit: type=1107 audit(1729534729.251:74): pid=1801 uid=101 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.3" pid=5484 label="snap.firefox.firefox" peer_pid=1828 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=101 hostname=? addr=? terminal=?'
audit: type=1107 audit(1729534729.379:75): pid=1801 uid=101 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/timedate1" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.103" pid=5484 label="snap.firefox.firefox" peer_pid=5677 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=101 hostname=? addr=? terminal=?'
audit: type=1107 audit(1729534729.379:76): pid=1801 uid=101 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/timedate1" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.103" pid=5484 label="snap.firefox.firefox" peer_pid=5677 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=101 hostname=? addr=? terminal=?'
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
nouveau 0000:01:00.0: fifo: fault 00 [READ] at 0000000000000000 engine 00 [gr] client 05 [HUB/FECS] reason 02 [PTE] on channel 8 [01ff53d000 gnome-clocks[7274]]
nouveau 0000:01:00.0: fifo:000000:0008:[gnome-clocks[7274]] rc scheduled
nouveau 0000:01:00.0: fifo:000000: rc scheduled
nouveau 0000:01:00.0: gr: FECS 00010000
nouveau 0000:01:00.0: gr: 409000 - done 00007300
nouveau 0000:01:00.0: gr: 409000 - stat 00000001 00000000 00090009 00000201
nouveau 0000:01:00.0: gr: 409000 - stat 00011900 00000000 00000000 00000000
nouveau 0000:01:00.0: gr: 502000 - done 00000300
nouveau 0000:01:00.0: gr: 502000 - stat 00000001 00000000 00000001 00000000
nouveau 0000:01:00.0: gr: 502000 - stat 00000790 00000000 00000000 00000000
nouveau 0000:01:00.0: gr: 50a000 - done 00000300
nouveau 0000:01:00.0: gr: 50a000 - stat 00000001 00000000 00000001 00000000
nouveau 0000:01:00.0: gr: 50a000 - stat 00000790 00000000 00000000 00000000
nouveau 0000:01:00.0: gr: 512000 - done 00000300
nouveau 0000:01:00.0: gr: 512000 - stat 00000001 00000000 00000001 00000000
nouveau 0000:01:00.0: gr: 512000 - stat 00000790 00000000 00000000 00000000
nouveau 0000:01:00.0: gr: 51a000 - done 00000300
nouveau 0000:01:00.0: gr: 51a000 - stat 00000001 00000000 00000001 00000000
nouveau 0000:01:00.0: gr: 51a000 - stat 00000790 00000000 00000000 00000000
nouveau 0000:01:00.0: fifo:000000:0008:0008:[gnome-clocks[7274]] errored - disabling channel
nouveau 0000:01:00.0: Xorg[2624]: channel 8 killed!
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
loop13: detected capacity change from 0 to 131016
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
loop14: detected capacity change from 0 to 23032
audit: type=1400 audit(1729535039.253:77): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.hw-probe" pid=8605 comm="apparmor_parser"
audit: type=1400 audit(1729535039.313:78): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.hw-probe.hook.configure" pid=8606 comm="apparmor_parser"
audit: type=1400 audit(1729535039.317:79): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.hw-probe.hw-probe" pid=8607 comm="apparmor_parser"
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
loop15: detected capacity change from 0 to 895688
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
audit: type=1400 audit(1729535080.212:80): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/20290/usr/lib/snapd/snap-confine" pid=9101 comm="apparmor_parser"
audit: type=1400 audit(1729535080.212:81): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/20290/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=9101 comm="apparmor_parser"
audit: type=1400 audit(1729535080.308:82): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.hw-probe" pid=9103 comm="apparmor_parser"
audit: type=1400 audit(1729535080.336:83): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.hw-probe.hook.configure" pid=9104 comm="apparmor_parser"
audit: type=1400 audit(1729535080.460:84): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.hw-probe.hw-probe" pid=9105 comm="apparmor_parser"
audit: type=1400 audit(1729535080.840:85): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hook.configure" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libpthread-2.31.so" pid=9140 comm="fc-cache" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1729535080.840:86): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hook.configure" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libc-2.31.so" pid=9140 comm="fc-cache" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1729535080.840:87): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hook.configure" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libexpat.so.1.6.11" pid=9140 comm="fc-cache" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1729535080.840:88): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hook.configure" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libexpat.so.1.6.11" pid=9140 comm="fc-cache" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
kauditd_printk_skb: 8 callbacks suppressed
audit: type=1400 audit(1729535110.139:98): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=9294 comm="snap-confine" capability=12 capname="net_admin"
audit: type=1400 audit(1729535110.139:99): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=9294 comm="snap-confine" capability=38 capname="perfmon"
audit: type=1326 audit(1729535110.667:100): auid=1000 uid=1000 gid=1000 ses=2 subj=snap.snap-store.snap-store pid=9294 comm="snap-store" exe="/snap/snap-store/1046/bin/snap-store" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f326f41b5b1 code=0x50000
audit: type=1326 audit(1729535110.667:101): auid=1000 uid=1000 gid=1000 ses=2 subj=snap.snap-store.snap-store pid=9294 comm="snap-store" exe="/snap/snap-store/1046/bin/snap-store" sig=0 arch=c000003e syscall=141 compat=0 ip=0x7f326f49a93b code=0x50000
audit: type=1400 audit(1729535110.775:102): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.snap-store" name="/proc/sys/vm/max_map_count" pid=9294 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1326 audit(1729535110.951:103): auid=1000 uid=1000 gid=1000 ses=2 subj=snap.snap-store.snap-store pid=9294 comm="snap-store" exe="/snap/snap-store/1046/bin/snap-store" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f326f41b5b1 code=0x50000
audit: type=1326 audit(1729535110.951:104): auid=1000 uid=1000 gid=1000 ses=2 subj=snap.snap-store.snap-store pid=9294 comm="snap-store" exe="/snap/snap-store/1046/bin/snap-store" sig=0 arch=c000003e syscall=141 compat=0 ip=0x7f326f49a93b code=0x50000
audit: type=1400 audit(1729535111.579:105): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.snap-store" name="/var/lib/swcatalog/" pid=9294 comm="DartWorker" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535111.587:106): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.snap-store" name="/var/cache/swcatalog/" pid=9294 comm="DartWorker" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535111.603:107): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.snap-store" name="/var/cache/app-info/" pid=9294 comm="DartWorker" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
loop16: detected capacity change from 0 to 56
kauditd_printk_skb: 4 callbacks suppressed
audit: type=1400 audit(1729535159.926:112): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.checkbox.client-cert-iot-server" pid=10114 comm="apparmor_parser"
audit: type=1400 audit(1729535159.926:113): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.checkbox.hook.remove" pid=10118 comm="apparmor_parser"
audit: type=1400 audit(1729535159.926:114): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.checkbox.odm-certification" pid=10119 comm="apparmor_parser"
audit: type=1400 audit(1729535159.926:115): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.checkbox.hook.configure" pid=10116 comm="apparmor_parser"
audit: type=1400 audit(1729535159.926:116): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.checkbox.hook.install" pid=10117 comm="apparmor_parser"
audit: type=1400 audit(1729535159.926:117): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.checkbox.checkbox-cli" pid=10113 comm="apparmor_parser"
audit: type=1400 audit(1729535159.926:118): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.checkbox.shell" pid=10120 comm="apparmor_parser"
audit: type=1400 audit(1729535159.926:119): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.checkbox.configure" pid=10115 comm="apparmor_parser"
audit: type=1400 audit(1729535159.926:120): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.checkbox.agent" pid=10112 comm="apparmor_parser"
audit: type=1400 audit(1729535159.930:121): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.checkbox.sru" pid=10121 comm="apparmor_parser"
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
evict_inodes inode 00000000cbcd48e6, i_count = 1, was skipped!
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
loop16: detected capacity change from 0 to 56
kauditd_printk_skb: 2 callbacks suppressed
audit: type=1400 audit(1729535233.937:124): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.odm-certification" pid=10802 comm="apparmor_parser"
audit: type=1400 audit(1729535233.937:125): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.hook.configure" pid=10799 comm="apparmor_parser"
audit: type=1400 audit(1729535233.937:126): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.agent" pid=10795 comm="apparmor_parser"
audit: type=1400 audit(1729535233.937:127): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.shell" pid=10803 comm="apparmor_parser"
audit: type=1400 audit(1729535233.937:128): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.checkbox-cli" pid=10796 comm="apparmor_parser"
audit: type=1400 audit(1729535233.937:129): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.hook.install" pid=10800 comm="apparmor_parser"
audit: type=1400 audit(1729535233.937:130): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.client-cert-iot-server" pid=10797 comm="apparmor_parser"
audit: type=1400 audit(1729535233.937:131): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.configure" pid=10798 comm="apparmor_parser"
audit: type=1400 audit(1729535233.937:132): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.hook.remove" pid=10801 comm="apparmor_parser"
audit: type=1400 audit(1729535233.941:133): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.sru" pid=10804 comm="apparmor_parser"
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
evict_inodes inode 00000000a7957118, i_count = 1, was skipped!
nouveau 0000:01:00.0: fifo: fault 00 [READ] at 0000000000000000 engine 00 [gr] client 05 [HUB/FECS] reason 02 [PTE] on channel 6 [01ff53b000 gnome-clocks[11128]]
nouveau 0000:01:00.0: fifo:000000:0006:[gnome-clocks[11128]] rc scheduled
nouveau 0000:01:00.0: fifo:000000: rc scheduled
nouveau 0000:01:00.0: gr: FECS 00010000
nouveau 0000:01:00.0: gr: 409000 - done 00007300
nouveau 0000:01:00.0: gr: 409000 - stat 00000001 00000000 00090009 00000201
nouveau 0000:01:00.0: gr: 409000 - stat 00011900 00000000 00000000 00000000
nouveau 0000:01:00.0: gr: 502000 - done 00000300
nouveau 0000:01:00.0: gr: 502000 - stat 00000001 00000000 00000001 00000000
nouveau 0000:01:00.0: gr: 502000 - stat 00000790 00000000 00000000 00000000
nouveau 0000:01:00.0: gr: 50a000 - done 00000300
nouveau 0000:01:00.0: gr: 50a000 - stat 00000001 00000000 00000001 00000000
nouveau 0000:01:00.0: gr: 50a000 - stat 00000790 00000000 00000000 00000000
nouveau 0000:01:00.0: gr: 512000 - done 00000300
nouveau 0000:01:00.0: gr: 512000 - stat 00000001 00000000 00000001 00000000
nouveau 0000:01:00.0: gr: 512000 - stat 00000790 00000000 00000000 00000000
nouveau 0000:01:00.0: gr: 51a000 - done 00000300
nouveau 0000:01:00.0: gr: 51a000 - stat 00000001 00000000 00000001 00000000
nouveau 0000:01:00.0: gr: 51a000 - stat 00000790 00000000 00000000 00000000
nouveau 0000:01:00.0: fifo:000000:0006:0006:[gnome-clocks[11128]] errored - disabling channel
nouveau 0000:01:00.0: Xorg[2624]: channel 6 killed!
nouveau 0000:01:00.0: fifo: fault 00 [READ] at 0000000000000000 engine 00 [gr] client 05 [HUB/FECS] reason 02 [PTE] on channel 8 [01ff515000 nautilus[11122]]
nouveau 0000:01:00.0: fifo:000000:0008:[nautilus[11122]] rc scheduled
nouveau 0000:01:00.0: fifo:000000: rc scheduled
nouveau 0000:01:00.0: gr: FECS 00010000
nouveau 0000:01:00.0: gr: 409000 - done 00007300
nouveau 0000:01:00.0: gr: 409000 - stat 00000001 00000000 00090009 00000201
nouveau 0000:01:00.0: gr: 409000 - stat 00011900 00000000 00000000 00000000
nouveau 0000:01:00.0: gr: 502000 - done 00000300
nouveau 0000:01:00.0: gr: 502000 - stat 00000001 00000000 00000001 00000000
nouveau 0000:01:00.0: gr: 502000 - stat 00000790 00000000 00000000 00000000
nouveau 0000:01:00.0: gr: 50a000 - done 00000300
nouveau 0000:01:00.0: gr: 50a000 - stat 00000001 00000000 00000001 00000000
nouveau 0000:01:00.0: gr: 50a000 - stat 00000790 00000000 00000000 00000000
nouveau 0000:01:00.0: gr: 512000 - done 00000300
nouveau 0000:01:00.0: gr: 512000 - stat 00000001 00000000 00000001 00000000
nouveau 0000:01:00.0: gr: 512000 - stat 00000790 00000000 00000000 00000000
nouveau 0000:01:00.0: gr: 51a000 - done 00000300
nouveau 0000:01:00.0: gr: 51a000 - stat 00000001 00000000 00000001 00000000
nouveau 0000:01:00.0: gr: 51a000 - stat 00000790 00000000 00000000 00000000
nouveau 0000:01:00.0: fifo:000000:0008:0008:[nautilus[11122]] errored - disabling channel
nouveau 0000:01:00.0: Xorg[2624]: channel 8 killed!
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
kauditd_printk_skb: 2 callbacks suppressed
audit: type=1400 audit(1729535240.633:136): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=11238 comm="snap-confine" capability=12 capname="net_admin"
audit: type=1400 audit(1729535240.633:137): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=11238 comm="snap-confine" capability=38 capname="perfmon"
audit: type=1400 audit(1729535240.753:138): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libc-2.31.so" pid=11306 comm="update-mime-dat" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535240.753:139): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libdl-2.31.so" pid=11306 comm="update-mime-dat" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535240.753:140): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libdl-2.31.so" pid=11306 comm="update-mime-dat" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535240.753:141): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libz.so.1.2.11" pid=11306 comm="update-mime-dat" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535240.753:142): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libz.so.1.2.11" pid=11306 comm="update-mime-dat" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535240.757:143): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/liblzma.so.5.2.4" pid=11306 comm="update-mime-dat" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535240.757:144): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/liblzma.so.5.2.4" pid=11306 comm="update-mime-dat" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535240.761:145): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libpthread-2.31.so" pid=11319 comm="gio-querymodule" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
kauditd_printk_skb: 180 callbacks suppressed
audit: type=1400 audit(1729535275.024:326): apparmor="DENIED" operation="exec" class="file" profile="snap.hw-probe.hw-probe" name="/usr/bin/kmod" pid=11988 comm="sh" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
audit: type=1400 audit(1729535275.036:327): apparmor="DENIED" operation="exec" class="file" profile="snap.hw-probe.hw-probe" name="/usr/bin/kmod" pid=11990 comm="sh" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
audit: type=1400 audit(1729535275.036:328): apparmor="DENIED" operation="exec" class="file" profile="snap.hw-probe.hw-probe" name="/usr/bin/kmod" pid=11993 comm="sh" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
audit: type=1400 audit(1729535275.480:329): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/run/utmp" pid=12076 comm="uptime" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535275.480:330): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/run/utmp" pid=12076 comm="uptime" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
audit: type=1400 audit(1729535332.472:331): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/etc/default/grub" pid=11408 comm="perl" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
audit: type=1107 audit(1729535431.826:332): pid=1801 uid=101 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal" bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="PropertiesChanged" name=":1.3" mask="receive" pid=5484 label="snap.firefox.firefox" peer_pid=1828 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=101 hostname=? addr=? terminal=?'
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
audit: type=1107 audit(1729535438.094:333): pid=1801 uid=101 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal" bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="PropertiesChanged" name=":1.3" mask="receive" pid=5484 label="snap.firefox.firefox" peer_pid=1828 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=101 hostname=? addr=? terminal=?'
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
audit: type=1107 audit(1729535461.486:334): pid=1801 uid=101 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal" bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="PropertiesChanged" name=":1.3" mask="receive" pid=5484 label="snap.firefox.firefox" peer_pid=1828 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=101 hostname=? addr=? terminal=?'
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
audit: type=1107 audit(1729535470.802:335): pid=1801 uid=101 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal" bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="PropertiesChanged" name=":1.3" mask="receive" pid=5484 label="snap.firefox.firefox" peer_pid=1828 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=101 hostname=? addr=? terminal=?'
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
audit: type=1107 audit(1729535548.717:336): pid=1801 uid=101 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal" bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="PropertiesChanged" name=":1.3" mask="receive" pid=5484 label="snap.firefox.firefox" peer_pid=1828 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=101 hostname=? addr=? terminal=?'
systemd[1]: systemd 253.5-1ubuntu6 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
audit: type=1400 audit(1729535600.788:337): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=21482 comm="snap-confine" capability=12 capname="net_admin"
audit: type=1400 audit(1729535600.788:338): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=21482 comm="snap-confine" capability=38 capname="perfmon"
audit: type=1400 audit(1729535600.992:339): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libgcc_s.so.1" pid=21553 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535600.992:340): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libsystemd.so.0.28.0" pid=21553 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535600.992:341): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libzstd.so.1.4.4" pid=21553 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535600.992:342): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/librt-2.31.so" pid=21553 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535600.992:343): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/liblz4.so.1.9.2" pid=21553 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535600.992:344): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libgcrypt.so.20.2.5" pid=21553 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535600.992:345): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libpcre.so.3.13.3" pid=21553 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535600.992:346): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libpcre.so.3.13.3" pid=21553 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
kauditd_printk_skb: 44 callbacks suppressed
audit: type=1107 audit(1729535621.700:391): pid=1801 uid=101 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal" bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="PropertiesChanged" name=":1.3" mask="receive" pid=5484 label="snap.firefox.firefox" peer_pid=1828 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=101 hostname=? addr=? terminal=?'
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
audit: type=1400 audit(1729535634.272:392): apparmor="DENIED" operation="exec" class="file" profile="snap.hw-probe.hw-probe" name="/usr/bin/kmod" pid=22544 comm="sh" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
audit: type=1400 audit(1729535634.280:393): apparmor="DENIED" operation="exec" class="file" profile="snap.hw-probe.hw-probe" name="/usr/bin/kmod" pid=22546 comm="sh" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
audit: type=1400 audit(1729535634.284:394): apparmor="DENIED" operation="exec" class="file" profile="snap.hw-probe.hw-probe" name="/usr/bin/kmod" pid=22549 comm="sh" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
audit: type=1400 audit(1729535634.756:395): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/run/utmp" pid=22620 comm="uptime" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535634.756:396): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/run/utmp" pid=22620 comm="uptime" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
audit: type=1400 audit(1729535692.104:397): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/etc/default/grub" pid=21573 comm="perl" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
loop16: detected capacity change from 0 to 56
audit: type=1400 audit(1729535693.456:398): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.shell" pid=23771 comm="apparmor_parser"
audit: type=1400 audit(1729535693.456:399): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.agent" pid=23763 comm="apparmor_parser"
audit: type=1400 audit(1729535693.456:400): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.configure" pid=23766 comm="apparmor_parser"
audit: type=1400 audit(1729535693.456:401): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.hook.remove" pid=23769 comm="apparmor_parser"
audit: type=1400 audit(1729535693.456:402): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.client-cert-iot-server" pid=23765 comm="apparmor_parser"
audit: type=1400 audit(1729535693.456:403): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.checkbox-cli" pid=23764 comm="apparmor_parser"
audit: type=1400 audit(1729535693.456:404): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.odm-certification" pid=23770 comm="apparmor_parser"
audit: type=1400 audit(1729535693.460:405): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.hook.configure" pid=23767 comm="apparmor_parser"
audit: type=1400 audit(1729535693.460:406): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.hook.install" pid=23768 comm="apparmor_parser"
evict_inodes inode 000000000ed7686c, i_count = 1, was skipped!
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
kauditd_printk_skb: 3 callbacks suppressed
audit: type=1107 audit(1729535877.779:410): pid=1801 uid=101 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal" bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="PropertiesChanged" name=":1.3" mask="receive" pid=5484 label="snap.firefox.firefox" peer_pid=1828 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=101 hostname=? addr=? terminal=?'
audit: type=1107 audit(1729535879.075:411): pid=1801 uid=101 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal" bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="PropertiesChanged" name=":1.3" mask="receive" pid=5484 label="snap.firefox.firefox" peer_pid=1828 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=101 hostname=? addr=? terminal=?'
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
loop16: detected capacity change from 0 to 477024
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
loop17: detected capacity change from 0 to 56
audit: type=1400 audit(1729535891.035:412): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.odm-certification" pid=29920 comm="apparmor_parser"
audit: type=1400 audit(1729535891.035:413): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.agent" pid=29909 comm="apparmor_parser"
audit: type=1400 audit(1729535891.039:414): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.shell" pid=29921 comm="apparmor_parser"
audit: type=1400 audit(1729535891.039:415): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.checkbox-cli" pid=29910 comm="apparmor_parser"
audit: type=1400 audit(1729535891.039:416): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.configure" pid=29912 comm="apparmor_parser"
audit: type=1400 audit(1729535891.039:417): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.hook.configure" pid=29915 comm="apparmor_parser"
audit: type=1400 audit(1729535891.043:418): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.hook.remove" pid=29918 comm="apparmor_parser"
audit: type=1400 audit(1729535891.043:419): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.checkbox" pid=29907 comm="apparmor_parser"
audit: type=1400 audit(1729535891.043:420): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.client-cert-iot-server" pid=29911 comm="apparmor_parser"
audit: type=1400 audit(1729535891.047:421): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox.hook.install" pid=29916 comm="apparmor_parser"
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
kauditd_printk_skb: 2 callbacks suppressed
audit: type=1400 audit(1729535904.879:424): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=34932 comm="snap-confine" capability=12 capname="net_admin"
audit: type=1400 audit(1729535904.879:425): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=34932 comm="snap-confine" capability=38 capname="perfmon"
audit: type=1400 audit(1729535905.367:426): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libgcc_s.so.1" pid=35141 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535905.367:427): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libsystemd.so.0.28.0" pid=35141 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535905.367:428): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libzstd.so.1.4.4" pid=35141 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535905.367:429): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/librt-2.31.so" pid=35141 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535905.367:430): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/liblz4.so.1.9.2" pid=35141 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535905.367:431): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libgcrypt.so.20.2.5" pid=35141 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535905.367:432): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libpcre.so.3.13.3" pid=35141 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535905.367:433): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/snap/core20/2379/usr/lib/x86_64-linux-gnu/libpcre.so.3.13.3" pid=35141 comm="python3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
kauditd_printk_skb: 44 callbacks suppressed
audit: type=1400 audit(1729535936.330:478): apparmor="DENIED" operation="exec" class="file" profile="snap.hw-probe.hw-probe" name="/usr/bin/kmod" pid=48991 comm="sh" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
audit: type=1400 audit(1729535936.354:479): apparmor="DENIED" operation="exec" class="file" profile="snap.hw-probe.hw-probe" name="/usr/bin/kmod" pid=48995 comm="sh" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
audit: type=1400 audit(1729535936.386:480): apparmor="DENIED" operation="exec" class="file" profile="snap.hw-probe.hw-probe" name="/usr/bin/kmod" pid=49012 comm="sh" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
audit: type=1400 audit(1729535937.318:481): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/run/utmp" pid=49327 comm="uptime" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1729535937.318:482): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/run/utmp" pid=49327 comm="uptime" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
audit: type=1400 audit(1729535993.742:483): apparmor="DENIED" operation="open" class="file" profile="snap.hw-probe.hw-probe" name="/etc/default/grub" pid=35302 comm="perl" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?
usb usb2-port8: Cannot enable. Maybe the USB cable is bad?