Xorg.0.log - tjbench-base
(--) Log file renamed from "/var/log/Xorg.pid-5077.log" to "/var/log/Xorg.0.log"
X.Org X Server 1.18.4
Release Date: 2016-07-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.15.0-140-generic x86_64 Ubuntu
Current Operating System: Linux tau 4.4.0-210-generic #242-Ubuntu SMP Fri Apr 16 09:57:56 UTC 2021 x86_64
Build Date: 08 April 2021 01:52:21PM
xorg-server 2:1.18.4-0ubuntu0.12 (For technical support please see )
Current version of pixman: 0.33.6
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 29 09:45:08 2023
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor ""
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(==) Max clients allowed: 256, resource mask: 0x1fffff
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x55b45e23cdc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 20.0
X.Org XInput driver : 22.1
X.Org Server Extension : 9.0
(++) using VT number 7
(II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
(--) PCI:*(0:10:0:0) 102b:0534:1028:063a rev 1, Mem @ 0x90000000/16777216, 0x91800000/16384, 0x91000000/8388608
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.18.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 9.0
(==) AIGLX enabled
(==) Matched mga as autoconfigured driver 0
(==) Matched modesetting as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Matched vesa as autoconfigured driver 3
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "mga"
(WW) Warning, couldn't open module mga
(II) UnloadModule: "mga"
(II) Unloading mga
(EE) Failed to load module "mga" (module does not exist, 0)
(II) LoadModule: "modesetting"
(II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
(II) Module modesetting: vendor="X.Org Foundation"
compiled for 1.18.4, module version = 1.18.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 20.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.18.1, module version = 0.4.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 20.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.18.1, module version = 2.3.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 20.0
(==) Matched mga as autoconfigured driver 0
(==) Matched modesetting as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Matched vesa as autoconfigured driver 3
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "mga"
(WW) Warning, couldn't open module mga
(II) UnloadModule: "mga"
(II) Unloading mga
(EE) Failed to load module "mga" (module does not exist, 0)
(II) LoadModule: "modesetting"
(II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
(II) Module modesetting: vendor="X.Org Foundation"
compiled for 1.18.4, module version = 1.18.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 20.0
(II) UnloadModule: "modesetting"
(II) Unloading modesetting
(II) Failed to load module "modesetting" (already loaded, 0)
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.18.1, module version = 0.4.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 20.0
(II) UnloadModule: "fbdev"
(II) Unloading fbdev
(II) Failed to load module "fbdev" (already loaded, 0)
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.18.1, module version = 2.3.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 20.0
(II) UnloadModule: "vesa"
(II) Unloading vesa
(II) Failed to load module "vesa" (already loaded, 0)
(II) modesetting: Driver for Modesetting Kernel Drivers: kms
(II) FBDEV: driver for framebuffer: fbdev
(II) VESA: driver for VESA chipsets: vesa
(EE) open /dev/dri/card0: No such file or directory
(EE) open /dev/dri/card0: No such file or directory
(WW) Falling back to old probe method for modesetting
(EE) open /dev/dri/card0: No such file or directory
(EE) open /dev/dri/card0: No such file or directory
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.18.4, module version = 0.0.2
ABI class: X.Org Video Driver, version 20.0
(**) FBDEV(2): claimed PCI slot 10@0:0:0
(II) FBDEV(2): using default device
(WW) Falling back to old probe method for vesa
(EE) Screen 0 deleted because of no matching config section.
(II) UnloadModule: "modesetting"
(EE) Screen 0 deleted because of no matching config section.
(II) UnloadModule: "modesetting"
(II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
(==) FBDEV(0): RGB weight 888
(==) FBDEV(0): Default visual is TrueColor
(==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDEV(0): hardware: VESA VGA (video memory: 5120kB)
(II) FBDEV(0): checking modes against framebuffer device...
(II) FBDEV(0): checking modes against monitor...
(--) FBDEV(0): Virtual size is 1280x1024 (pitch 1280)
(**) FBDEV(0): Built-in mode "current": 131.1 MHz, 80.3 kHz, 76.6 Hz
(II) FBDEV(0): Modeline "current"x0.0 131.09 1280 1312 1472 1632 1024 1028 1032 1048 -hsync -vsync -csync (80.3 kHz b)
(==) FBDEV(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.18.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(**) FBDEV(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.18.4, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading vesa
(==) Depth 24 pixmap format is 32 bpp
(II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
(==) FBDEV(0): Backing store enabled
(==) FBDEV(0): DPMS enabled
(==) RandR enabled
(II) SELinux: Disabled on system
(II) AIGLX: Screen 0 is not DRI2 capable
(EE) AIGLX: reverting to software rendering
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: Loaded and initialized swrast
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.18.1, module version = 2.10.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 22.1
(II) systemd-logind: got fd for /dev/input/event0 13:64 fd 14 paused 0
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event0"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event1)
(**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(II) systemd-logind: got fd for /dev/input/event1 13:65 fd 15 paused 0
(II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
(**) PixArt USB Optical Mouse: always reports core events
(**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event1"
(--) evdev: PixArt USB Optical Mouse: Vendor 0x4f2 Product 0x939
(--) evdev: PixArt USB Optical Mouse: Found 12 mouse buttons
(--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
(--) evdev: PixArt USB Optical Mouse: Found relative axes
(--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
(II) evdev: PixArt USB Optical Mouse: Configuring as mouse
(II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
(**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11.2/3-11.2:1.0/0003:04F2:0939.0001/input/input1/event1"
(II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 7)
(II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
(**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) PixArt USB Optical Mouse: (accel) acceleration profile 0
(**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
(**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
(II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Dell Dell USB Entry Keyboard (/dev/input/event2)
(**) Dell Dell USB Entry Keyboard: Applying InputClass "evdev keyboard catchall"
(II) systemd-logind: got fd for /dev/input/event2 13:66 fd 16 paused 0
(II) Using input driver 'evdev' for 'Dell Dell USB Entry Keyboard'
(**) Dell Dell USB Entry Keyboard: always reports core events
(**) evdev: Dell Dell USB Entry Keyboard: Device: "/dev/input/event2"
(--) evdev: Dell Dell USB Entry Keyboard: Vendor 0x413c Product 0x2107
(--) evdev: Dell Dell USB Entry Keyboard: Found keys
(II) evdev: Dell Dell USB Entry Keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11.3/3-11.3:1.0/0003:413C:2107.0002/input/input2/event2"
(II) XINPUT: Adding extended input device "Dell Dell USB Entry Keyboard" (type: KEYBOARD, id 8)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) systemd-logind: got pause for 13:66
(II) systemd-logind: got pause for 13:65
(II) systemd-logind: got pause for 13:64
(II) evdev: Dell Dell USB Entry Keyboard: Close
(II) UnloadModule: "evdev"
(II) systemd-logind: releasing fd for 13:66
(II) evdev: PixArt USB Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) systemd-logind: releasing fd for 13:65
(II) evdev: Power Button: Close
(II) UnloadModule: "evdev"
(II) systemd-logind: releasing fd for 13:64
(WW) xf86CloseConsole: KDSETMODE failed: Input/output error
(WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
(WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
(II) Server terminated successfully (0). Closing log file.