dmesg - desktop-amd580
Linux version 6.5.9-1-default (geeko@buildhost) (gcc (SUSE Linux) 13.2.1 20230912 [revision b96e66fd4ef3e36983969fb8cdd1956f551a074b], GNU ld (GNU Binutils; openSUSE Tumbleweed) 2.40.0.20230412-5) #1 SMP PREEMPT_DYNAMIC Wed Oct 25 10:31:37 UTC 2023 (29edc7c)
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d1efff] usable
BIOS-e820: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
BIOS-e820: [mem 0x000000000a20b000-0x00000000c3487fff] usable
BIOS-e820: [mem 0x00000000c3488000-0x00000000c3488fff] reserved
BIOS-e820: [mem 0x00000000c3489000-0x00000000ca53afff] usable
BIOS-e820: [mem 0x00000000ca53b000-0x00000000ca896fff] reserved
BIOS-e820: [mem 0x00000000ca897000-0x00000000cabc5fff] ACPI data
BIOS-e820: [mem 0x00000000cabc6000-0x00000000caefefff] ACPI NVS
BIOS-e820: [mem 0x00000000caeff000-0x00000000cbbfefff] reserved
BIOS-e820: [mem 0x00000000cbbff000-0x00000000ccffffff] usable
BIOS-e820: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000102f37ffff] usable
BIOS-e820: [mem 0x000000102f380000-0x000000102fffffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0xc1361018-0xc1370067] usable ==> usable
e820: update [mem 0xc1361018-0xc1370067] usable ==> usable
e820: update [mem 0xc1343018-0xc1360257] usable ==> usable
e820: update [mem 0xc1343018-0xc1360257] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009d1efff] usable
reserve setup_data: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
reserve setup_data: [mem 0x000000000a20b000-0x00000000c1343017] usable
reserve setup_data: [mem 0x00000000c1343018-0x00000000c1360257] usable
reserve setup_data: [mem 0x00000000c1360258-0x00000000c1361017] usable
reserve setup_data: [mem 0x00000000c1361018-0x00000000c1370067] usable
reserve setup_data: [mem 0x00000000c1370068-0x00000000c3487fff] usable
reserve setup_data: [mem 0x00000000c3488000-0x00000000c3488fff] reserved
reserve setup_data: [mem 0x00000000c3489000-0x00000000ca53afff] usable
reserve setup_data: [mem 0x00000000ca53b000-0x00000000ca896fff] reserved
reserve setup_data: [mem 0x00000000ca897000-0x00000000cabc5fff] ACPI data
reserve setup_data: [mem 0x00000000cabc6000-0x00000000caefefff] ACPI NVS
reserve setup_data: [mem 0x00000000caeff000-0x00000000cbbfefff] reserved
reserve setup_data: [mem 0x00000000cbbff000-0x00000000ccffffff] usable
reserve setup_data: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
reserve setup_data: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000102f37ffff] usable
reserve setup_data: [mem 0x000000102f380000-0x000000102fffffff] reserved
efi: EFI v2.7 by American Megatrends
efi: ACPI=0xcabc5000 ACPI 2.0=0xcabc5014 TPMFinalLog=0xcaeb4000 SMBIOS=0xcb9f5000 SMBIOS 3.0=0xcb9f4000 MEMATTR=0xc6694698 ESRT=0xc975b918 MOKvar=0xc667e000 RNG=0xcaba2c18 TPMEventLog=0xc1372018
random: crng init done
efi: Remove mem69: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
e820: remove [mem 0xf0000000-0xf7ffffff] reserved
efi: Remove mem70: MMIO range=[0xfd100000-0xfd1fffff] (1MB) from e820 map
e820: remove [mem 0xfd100000-0xfd1fffff] reserved
efi: Not removing mem71: MMIO range=[0xfea00000-0xfea0ffff] (64KB) from e820 map
efi: Remove mem72: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map
e820: remove [mem 0xfeb80000-0xfec01fff] reserved
efi: Not removing mem73: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
efi: Not removing mem74: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
efi: Not removing mem75: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
efi: Not removing mem76: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
efi: Not removing mem77: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map
efi: Not removing mem78: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map
efi: Remove mem79: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
e820: remove [mem 0xff000000-0xffffffff] reserved
secureboot: Secure boot disabled
SMBIOS 3.3.0 present.
DMI: ASUS System Product Name/TUF GAMING X570-PRO (WI-FI), BIOS 4408 10/28/2022
tsc: Fast TSC calibration using PIT
tsc: Detected 3700.062 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x102f380 max_arch_pfn = 0x400000000
MTRR map: 6 entries (4 fixed + 2 variable; max 21), built from 9 variable MTRRs
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
last_pfn = 0xcd000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000c975b918 to 0x00000000c975b950.
e820: update [mem 0xc975b000-0xc975bfff] usable ==> reserved
e820: update [mem 0xc667e000-0xc667efff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x721e9000-0x75444fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000CABC5014 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CABC4728 0000E4 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x00000000CABB5000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000CABA9000 00B5D8 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000CAEB2000 000040
ACPI: SSDT 0x00000000CABBB000 008C98 (v02 AMD AmdTable 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000CABB7000 003B86 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: SSDT 0x00000000CABB6000 0000FC (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: FIDT 0x00000000CABA8000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000CAA5D000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: MCFG 0x00000000CABA6000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000CABA5000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000CABA4000 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
ACPI: SSDT 0x00000000CABA3000 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: VFCT 0x00000000CAB93000 00EC84 (v01 ALASKA A M I 00000001 AMD 31504F47)
ACPI: BGRT 0x00000000CAB92000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WPBT 0x00000000CAA6F000 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
ACPI: TPM2 0x00000000CAA6E000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
ACPI: IVRS 0x00000000CAA6D000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000000)
ACPI: SSDT 0x00000000CAA6A000 002314 (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: CRAT 0x00000000CAA69000 000F50 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: CDIT 0x00000000CAA68000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: SSDT 0x00000000CAA67000 000259 (v01 AMD QOGIRDGP 00000001 INTL 20120913)
ACPI: SSDT 0x00000000CAA65000 0010AC (v01 AMD QOGIRTPX 00000001 INTL 20120913)
ACPI: SSDT 0x00000000CAA64000 00052C (v01 AMD QOGIRNOI 00000001 INTL 20120913)
ACPI: SSDT 0x00000000CAA60000 003E42 (v01 AMD QOGIRN 00000001 INTL 20120913)
ACPI: WSMT 0x00000000CAA5F000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: APIC 0x00000000CAA5E000 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: Reserving FACP table memory at [mem 0xcabb5000-0xcabb5113]
ACPI: Reserving DSDT table memory at [mem 0xcaba9000-0xcabb45d7]
ACPI: Reserving FACS table memory at [mem 0xcaeb2000-0xcaeb203f]
ACPI: Reserving SSDT table memory at [mem 0xcabbb000-0xcabc3c97]
ACPI: Reserving SSDT table memory at [mem 0xcabb7000-0xcabbab85]
ACPI: Reserving SSDT table memory at [mem 0xcabb6000-0xcabb60fb]
ACPI: Reserving FIDT table memory at [mem 0xcaba8000-0xcaba809b]
ACPI: Reserving FPDT table memory at [mem 0xcaa5d000-0xcaa5d043]
ACPI: Reserving MCFG table memory at [mem 0xcaba6000-0xcaba603b]
ACPI: Reserving HPET table memory at [mem 0xcaba5000-0xcaba5037]
ACPI: Reserving SSDT table memory at [mem 0xcaba4000-0xcaba4023]
ACPI: Reserving SSDT table memory at [mem 0xcaba3000-0xcaba3023]
ACPI: Reserving VFCT table memory at [mem 0xcab93000-0xcaba1c83]
ACPI: Reserving BGRT table memory at [mem 0xcab92000-0xcab92037]
ACPI: Reserving WPBT table memory at [mem 0xcaa6f000-0xcaa6f03b]
ACPI: Reserving TPM2 table memory at [mem 0xcaa6e000-0xcaa6e04b]
ACPI: Reserving IVRS table memory at [mem 0xcaa6d000-0xcaa6d0cf]
ACPI: Reserving SSDT table memory at [mem 0xcaa6a000-0xcaa6c313]
ACPI: Reserving CRAT table memory at [mem 0xcaa69000-0xcaa69f4f]
ACPI: Reserving CDIT table memory at [mem 0xcaa68000-0xcaa68028]
ACPI: Reserving SSDT table memory at [mem 0xcaa67000-0xcaa67258]
ACPI: Reserving SSDT table memory at [mem 0xcaa65000-0xcaa660ab]
ACPI: Reserving SSDT table memory at [mem 0xcaa64000-0xcaa6452b]
ACPI: Reserving SSDT table memory at [mem 0xcaa60000-0xcaa63e41]
ACPI: Reserving WSMT table memory at [mem 0xcaa5f000-0xcaa5f027]
ACPI: Reserving APIC table memory at [mem 0xcaa5e000-0xcaa5e15d]
system APIC only can use physical flat
Setting APIC routing to physical flat.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000102f37ffff]
NODE_DATA(0) allocated [mem 0x102f355000-0x102f37ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000102f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009d1efff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a20b000-0x00000000c3487fff]
node 0: [mem 0x00000000c3489000-0x00000000ca53afff]
node 0: [mem 0x00000000cbbff000-0x00000000ccffffff]
node 0: [mem 0x0000000100000000-0x000000102f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000102f37ffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 737 pages in unavailable ranges
On node 0, zone DMA32: 11 pages in unavailable ranges
On node 0, zone DMA32: 1 pages in unavailable ranges
On node 0, zone DMA32: 5828 pages in unavailable ranges
On node 0, zone Normal: 12288 pages in unavailable ranges
On node 0, zone Normal: 3200 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
system APIC only can use physical flat
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
e820: update [mem 0xc6c52000-0xc6c97fff] usable ==> reserved
smpboot: Allowing 32 CPUs, 16 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09d1f000-0x09ffffff]
PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
PM: hibernation: Registered nosave memory: [mem 0xc1343000-0xc1343fff]
PM: hibernation: Registered nosave memory: [mem 0xc1360000-0xc1360fff]
PM: hibernation: Registered nosave memory: [mem 0xc1361000-0xc1361fff]
PM: hibernation: Registered nosave memory: [mem 0xc1370000-0xc1370fff]
PM: hibernation: Registered nosave memory: [mem 0xc3488000-0xc3488fff]
PM: hibernation: Registered nosave memory: [mem 0xc667e000-0xc667efff]
PM: hibernation: Registered nosave memory: [mem 0xc6c52000-0xc6c97fff]
PM: hibernation: Registered nosave memory: [mem 0xc975b000-0xc975bfff]
PM: hibernation: Registered nosave memory: [mem 0xca53b000-0xca896fff]
PM: hibernation: Registered nosave memory: [mem 0xca897000-0xcabc5fff]
PM: hibernation: Registered nosave memory: [mem 0xcabc6000-0xcaefefff]
PM: hibernation: Registered nosave memory: [mem 0xcaeff000-0xcbbfefff]
PM: hibernation: Registered nosave memory: [mem 0xcd000000-0xcfffffff]
PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfe9fffff]
PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfec0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xffffffff]
[mem 0xd0000000-0xfe9fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 70 pages/cpu s249856 r8192 d28672 u524288
pcpu-alloc: s249856 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23
pcpu-alloc: [0] 24 25 26 27 [0] 28 29 30 31
Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.5.9-1-default splash=silent", will be passed to user space.
printk: log_buf_len individual max cpu contribution: 32768 bytes
printk: log_buf_len total cpu_extra contributions: 1015808 bytes
printk: log_buf_len min size: 262144 bytes
printk: log_buf_len: 2097152 bytes
printk: early log buf free: 243440(92%)
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 16493095
Policy zone: Normal
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: area num 32.
Memory: 3281044K/67020216K available (16384K kernel code, 2940K rwdata, 12408K rodata, 4172K init, 16960K bss, 1407620K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 45871 entries in 180 pages
ftrace: allocated 180 pages with 4 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
AMD-Vi: Using global IVHD EFR:0xf77ef22294ada, EFR2:0x0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aab23396bc, max_idle_ns: 881591057655 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7403.46 BogoMIPS (lpj=12333540)
AMD Zen1 DIV0 bug detected. Disable SMT for full protection.
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Speculation Barrier for firmware calls
RETBleed: Mitigation: untrained return thunk
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
Speculative Return Stack Overflow: Mitigation: safe RET
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
Freeing SMP alternatives memory: 36K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,bpf,integrity
landlock: Up and running.
Yama: becoming mindful.
AppArmor: AppArmor initialized
LSM support for eBPF active
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
smpboot: CPU0: AMD Ryzen 7 2700X Eight-Core Processor (family: 0x17, model: 0x8, stepping: 0x2)
RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
signal: max sigframe size: 1776
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 16 processors activated (118449.40 BogoMIPS)
node 0 deferred pages initialised in 84ms
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0xcabc6000-0xcaefefff] (3379200 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 01:36:20, date: 2023-11-05
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1699148179.276:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor ladder
cpuidle: using governor menu
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 11 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved as ACPI motherboard resource
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfec02fff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.2: [1022:1453] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:01:00.0: [1022:57ad] type 01 class 0x060400
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link)
pci 0000:00:01.2: PCI bridge to [bus 01-09]
pci 0000:00:01.2: bridge window [mem 0xfc200000-0xfcafffff]
pci 0000:02:01.0: [1022:57a3] type 01 class 0x060400
pci 0000:02:01.0: enabling Extended Tags
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: [1022:57a3] type 01 class 0x060400
pci 0000:02:02.0: enabling Extended Tags
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:04.0: [1022:57a3] type 01 class 0x060400
pci 0000:02:04.0: enabling Extended Tags
pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
pci 0000:02:05.0: [1022:57a3] type 01 class 0x060400
pci 0000:02:05.0: enabling Extended Tags
pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
pci 0000:02:08.0: [1022:57a4] type 01 class 0x060400
pci 0000:02:08.0: enabling Extended Tags
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:02:09.0: [1022:57a4] type 01 class 0x060400
pci 0000:02:09.0: enabling Extended Tags
pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
pci 0000:02:0a.0: [1022:57a4] type 01 class 0x060400
pci 0000:02:0a.0: enabling Extended Tags
pci 0000:02:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-09]
pci 0000:01:00.0: bridge window [mem 0xfc200000-0xfcafffff]
pci 0000:03:00.0: [15b7:5011] type 00 class 0x010802
pci 0000:03:00.0: reg 0x10: [mem 0xfca00000-0xfca03fff 64bit]
pci 0000:03:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0xfca00000-0xfcafffff]
pci 0000:04:00.0: [15b7:5006] type 00 class 0x010802
pci 0000:04:00.0: reg 0x10: [mem 0xfc900000-0xfc903fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xfc904000-0xfc9040ff 64bit]
pci 0000:02:02.0: PCI bridge to [bus 04]
pci 0000:02:02.0: bridge window [mem 0xfc900000-0xfc9fffff]
pci 0000:05:00.0: [8086:2723] type 00 class 0x028000
pci 0000:05:00.0: reg 0x10: [mem 0xfc800000-0xfc803fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:04.0: PCI bridge to [bus 05]
pci 0000:02:04.0: bridge window [mem 0xfc800000-0xfc8fffff]
pci 0000:06:00.0: [8086:15f3] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xfc400000-0xfc4fffff]
pci 0000:06:00.0: reg 0x1c: [mem 0xfc500000-0xfc503fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:05.0: PCI bridge to [bus 06]
pci 0000:02:05.0: bridge window [mem 0xfc400000-0xfc5fffff]
pci 0000:07:00.0: [1022:1485] type 00 class 0x130000
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:07:00.1: [1022:149c] type 00 class 0x0c0330
pci 0000:07:00.1: reg 0x10: [mem 0xfc300000-0xfc3fffff 64bit]
pci 0000:07:00.1: enabling Extended Tags
pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
pci 0000:07:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:07:00.3: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit]
pci 0000:07:00.3: enabling Extended Tags
pci 0000:07:00.3: PME# supported from D0 D3hot D3cold
pci 0000:02:08.0: PCI bridge to [bus 07]
pci 0000:02:08.0: bridge window [mem 0xfc200000-0xfc3fffff]
pci 0000:08:00.0: [1022:7901] type 00 class 0x010601
pci 0000:08:00.0: reg 0x24: [mem 0xfc700000-0xfc7007ff]
pci 0000:08:00.0: enabling Extended Tags
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:02:09.0: PCI bridge to [bus 08]
pci 0000:02:09.0: bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:09:00.0: [1022:7901] type 00 class 0x010601
pci 0000:09:00.0: reg 0x24: [mem 0xfc600000-0xfc6007ff]
pci 0000:09:00.0: enabling Extended Tags
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:02:0a.0: PCI bridge to [bus 09]
pci 0000:02:0a.0: bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:0a:00.0: [1002:67df] type 00 class 0x030000
pci 0000:0a:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:0a:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
pci 0000:0a:00.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:0a:00.0: reg 0x24: [mem 0xfcf00000-0xfcf3ffff]
pci 0000:0a:00.0: reg 0x30: [mem 0xfcf40000-0xfcf5ffff pref]
pci 0000:0a:00.0: BAR 0: assigned to efifb
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:0a:00.1: [1002:aaf0] type 00 class 0x040300
pci 0000:0a:00.1: reg 0x10: [mem 0xfcf60000-0xfcf63fff 64bit]
pci 0000:0a:00.1: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 0a]
pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
pci 0000:00:03.1: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:0b:00.0: [1022:145a] type 00 class 0x130000
pci 0000:0b:00.0: enabling Extended Tags
pci 0000:0b:00.2: [1022:1456] type 00 class 0x108000
pci 0000:0b:00.2: reg 0x18: [mem 0xfcc00000-0xfccfffff]
pci 0000:0b:00.2: reg 0x24: [mem 0xfcd00000-0xfcd01fff]
pci 0000:0b:00.2: enabling Extended Tags
pci 0000:0b:00.3: [1022:145f] type 00 class 0x0c0330
pci 0000:0b:00.3: reg 0x10: [mem 0xfcb00000-0xfcbfffff 64bit]
pci 0000:0b:00.3: enabling Extended Tags
pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 0b]
pci 0000:00:07.1: bridge window [mem 0xfcb00000-0xfcdfffff]
pci 0000:0c:00.0: [1022:1455] type 00 class 0x130000
pci 0000:0c:00.0: enabling Extended Tags
pci 0000:0c:00.2: [1022:7901] type 00 class 0x010601
pci 0000:0c:00.2: reg 0x24: [mem 0xfce08000-0xfce08fff]
pci 0000:0c:00.2: enabling Extended Tags
pci 0000:0c:00.2: PME# supported from D3hot D3cold
pci 0000:0c:00.3: [1022:1457] type 00 class 0x040300
pci 0000:0c:00.3: reg 0x10: [mem 0xfce00000-0xfce07fff]
pci 0000:0c:00.3: enabling Extended Tags
pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: bridge window [mem 0xfce00000-0xfcefffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
iommu: Default domain type: Passthrough
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
efivars: Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d1f000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0xc1343018-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc1361018-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc3488000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc667e000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc6c52000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc975b000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca53b000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
e820: reserve RAM buffer [mem 0x102f380000-0x102fffffff]
pci 0000:0a:00.0: vgaarb: setting as boot VGA device
pci 0000:0a:00.0: vgaarb: bridge control possible
pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: [io 0x0200-0x021f] has been reserved
pnp 00:03: [dma 0 disabled]
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 524288 bind 65536)
MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0xfca00000-0xfcafffff]
pci 0000:02:02.0: PCI bridge to [bus 04]
pci 0000:02:02.0: bridge window [mem 0xfc900000-0xfc9fffff]
pci 0000:02:04.0: PCI bridge to [bus 05]
pci 0000:02:04.0: bridge window [mem 0xfc800000-0xfc8fffff]
pci 0000:02:05.0: PCI bridge to [bus 06]
pci 0000:02:05.0: bridge window [mem 0xfc400000-0xfc5fffff]
pci 0000:02:08.0: PCI bridge to [bus 07]
pci 0000:02:08.0: bridge window [mem 0xfc200000-0xfc3fffff]
pci 0000:02:09.0: PCI bridge to [bus 08]
pci 0000:02:09.0: bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:02:0a.0: PCI bridge to [bus 09]
pci 0000:02:0a.0: bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:01:00.0: PCI bridge to [bus 02-09]
pci 0000:01:00.0: bridge window [mem 0xfc200000-0xfcafffff]
pci 0000:00:01.2: PCI bridge to [bus 01-09]
pci 0000:00:01.2: bridge window [mem 0xfc200000-0xfcafffff]
pci 0000:00:03.1: PCI bridge to [bus 0a]
pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
pci 0000:00:03.1: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 0b]
pci 0000:00:07.1: bridge window [mem 0xfcb00000-0xfcdfffff]
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: bridge window [mem 0xfce00000-0xfcefffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfec02fff window]
pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfcafffff]
pci_bus 0000:02: resource 1 [mem 0xfc200000-0xfcafffff]
pci_bus 0000:03: resource 1 [mem 0xfca00000-0xfcafffff]
pci_bus 0000:04: resource 1 [mem 0xfc900000-0xfc9fffff]
pci_bus 0000:05: resource 1 [mem 0xfc800000-0xfc8fffff]
pci_bus 0000:06: resource 1 [mem 0xfc400000-0xfc5fffff]
pci_bus 0000:07: resource 1 [mem 0xfc200000-0xfc3fffff]
pci_bus 0000:08: resource 1 [mem 0xfc700000-0xfc7fffff]
pci_bus 0000:09: resource 1 [mem 0xfc600000-0xfc6fffff]
pci_bus 0000:0a: resource 0 [io 0xf000-0xffff]
pci_bus 0000:0a: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:0a: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
pci_bus 0000:0b: resource 1 [mem 0xfcb00000-0xfcdfffff]
pci_bus 0000:0c: resource 1 [mem 0xfce00000-0xfcefffff]
pci 0000:0a:00.1: D0 power state depends on 0000:0a:00.0
PCI: CLS 64 bytes, default 64
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
Trying to unpack rootfs image as initramfs...
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.2: Adding to iommu group 1
pci 0000:00:02.0: Adding to iommu group 2
pci 0000:00:03.0: Adding to iommu group 3
pci 0000:00:03.1: Adding to iommu group 4
pci 0000:00:04.0: Adding to iommu group 5
pci 0000:00:07.0: Adding to iommu group 6
pci 0000:00:07.1: Adding to iommu group 7
pci 0000:00:08.0: Adding to iommu group 8
pci 0000:00:08.1: Adding to iommu group 9
pci 0000:00:14.0: Adding to iommu group 10
pci 0000:00:14.3: Adding to iommu group 10
pci 0000:00:18.0: Adding to iommu group 11
pci 0000:00:18.1: Adding to iommu group 11
pci 0000:00:18.2: Adding to iommu group 11
pci 0000:00:18.3: Adding to iommu group 11
pci 0000:00:18.4: Adding to iommu group 11
pci 0000:00:18.5: Adding to iommu group 11
pci 0000:00:18.6: Adding to iommu group 11
pci 0000:00:18.7: Adding to iommu group 11
pci 0000:01:00.0: Adding to iommu group 12
pci 0000:02:01.0: Adding to iommu group 13
pci 0000:02:02.0: Adding to iommu group 14
pci 0000:02:04.0: Adding to iommu group 15
pci 0000:02:05.0: Adding to iommu group 16
pci 0000:02:08.0: Adding to iommu group 17
pci 0000:02:09.0: Adding to iommu group 18
pci 0000:02:0a.0: Adding to iommu group 19
pci 0000:03:00.0: Adding to iommu group 20
pci 0000:04:00.0: Adding to iommu group 21
pci 0000:05:00.0: Adding to iommu group 22
pci 0000:06:00.0: Adding to iommu group 23
pci 0000:07:00.0: Adding to iommu group 17
pci 0000:07:00.1: Adding to iommu group 17
pci 0000:07:00.3: Adding to iommu group 17
pci 0000:08:00.0: Adding to iommu group 18
pci 0000:09:00.0: Adding to iommu group 19
pci 0000:0a:00.0: Adding to iommu group 24
pci 0000:0a:00.1: Adding to iommu group 24
pci 0000:0b:00.0: Adding to iommu group 25
pci 0000:0b:00.2: Adding to iommu group 26
pci 0000:0b:00.3: Adding to iommu group 27
pci 0000:0c:00.0: Adding to iommu group 28
pci 0000:0c:00.2: Adding to iommu group 29
pci 0000:0c:00.3: Adding to iommu group 30
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
AMD-Vi: Extended features (0xf77ef22294ada, 0x0): PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000bd343000-0x00000000c1343000] (64MB)
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-16 Joules
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
jitterentropy: Initialization failed with host not compliant with requirements: 9
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 51568K
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.2: AER: enabled with IRQ 27
pcieport 0000:00:03.1: AER: enabled with IRQ 28
pcieport 0000:00:07.1: AER: enabled with IRQ 29
pcieport 0000:00:08.1: AER: enabled with IRQ 31
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Monitor-Mwait will be used to enter C-1 state
ACPI: \_PR_.C000: Found 2 idle states
ACPI: \_PR_.C002: Found 2 idle states
ACPI: \_PR_.C004: Found 2 idle states
ACPI: \_PR_.C006: Found 2 idle states
ACPI: \_PR_.C008: Found 2 idle states
ACPI: \_PR_.C00A: Found 2 idle states
ACPI: \_PR_.C00C: Found 2 idle states
ACPI: \_PR_.C00E: Found 2 idle states
ACPI: \_PR_.C001: Found 2 idle states
ACPI: \_PR_.C003: Found 2 idle states
ACPI: \_PR_.C005: Found 2 idle states
ACPI: \_PR_.C007: Found 2 idle states
ACPI: \_PR_.C009: Found 2 idle states
ACPI: \_PR_.C00B: Found 2 idle states
ACPI: \_PR_.C00D: Found 2 idle states
ACPI: \_PR_.C00F: Found 2 idle states
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_crb MSFT0101:00: Disabling hwrng
ACPI: bus type drm_connector registered
[drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
Console: switching to colour frame buffer device 128x48
simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: setting system clock to 2023-11-05T01:36:20 UTC (1699148180)
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
ledtrig-cpu: registered to indicate activity on CPUs
hid: raw HID events driver (C) Jiri Kosina
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
microcode: microcode updated early to new patch_level=0x0800820d
microcode: CPU0: patch_level=0x0800820d
microcode: CPU1: patch_level=0x0800820d
microcode: CPU2: patch_level=0x0800820d
microcode: CPU3: patch_level=0x0800820d
microcode: CPU4: patch_level=0x0800820d
microcode: CPU5: patch_level=0x0800820d
microcode: CPU6: patch_level=0x0800820d
microcode: CPU3: new patch_level=0x0800820d
microcode: CPU2: new patch_level=0x0800820d
microcode: CPU0: new patch_level=0x0800820d
microcode: CPU1: new patch_level=0x0800820d
microcode: CPU6: new patch_level=0x0800820d
microcode: CPU7: patch_level=0x0800820d
microcode: CPU4: new patch_level=0x0800820d
microcode: CPU8: patch_level=0x0800820d
microcode: CPU10: patch_level=0x0800820d
microcode: CPU11: patch_level=0x0800820d
microcode: CPU5: new patch_level=0x0800820d
microcode: CPU9: patch_level=0x0800820d
microcode: CPU14: patch_level=0x0800820d
microcode: CPU12: patch_level=0x0800820d
microcode: CPU13: patch_level=0x0800820d
microcode: CPU7: new patch_level=0x0800820d
microcode: CPU15: patch_level=0x0800820d
microcode: CPU10: new patch_level=0x0800820d
microcode: CPU11: new patch_level=0x0800820d
microcode: CPU12: new patch_level=0x0800820d
microcode: CPU14: new patch_level=0x0800820d
microcode: CPU8: new patch_level=0x0800820d
microcode: CPU9: new patch_level=0x0800820d
microcode: CPU13: new patch_level=0x0800820d
microcode: CPU15: new patch_level=0x0800820d
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (679451859, 437467)->(848941954, -169052628)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
page_owner is disabled
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 15:90:609
PM: hash matches drivers/base/power/main.c:768
node node0: hash matches
RAS: Correctable Errors collector initialized.
clk: Disabling unused clocks
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 4172K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (rodata/data gap) memory: 1928K
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-6.5.9-1-default
splash=silent
systemd[1]: systemd 254.5+suse.10.gb53f364c26 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON -UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initrd.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to .
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: Queued start job for default target Initrd Default Target.
systemd[1]: Reached target Initrd /usr File System.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Reached target Timer Units.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Socket Units.
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Memstrack Anylazing Service was skipped because no trigger condition checks were met.
systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Virtual Console Setup...
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
systemd-journald[294]: Collecting audit messages is disabled.
systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Reached target Preparation for Local File Systems.
systemd[1]: Reached target Local File Systems.
SCSI subsystem initialized
alua: device handler registered
emc: device handler registered
rdac: device handler registered
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
systemd[1]: Finished Virtual Console Setup.
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
systemd[1]: Starting dracut ask for additional cmdline parameters...
systemd[1]: Started Journal Service.
raid6: avx2x4 gen() 26497 MB/s
raid6: avx2x2 gen() 29815 MB/s
raid6: avx2x1 gen() 27239 MB/s
raid6: using algorithm avx2x2 gen() 29815 MB/s
raid6: .... xor() 15779 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
tsc: Refined TSC clocksource calibration: 3699.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6aaaa900000, max_idle_ns: 881590498719 ns
clocksource: Switched to clocksource tsc
Btrfs loaded, assert=on, zoned=yes, fsverity=yes
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
ccp 0000:0b:00.2: enabling device (0000 -> 0002)
ccp 0000:0b:00.2: ccp enabled
ccp 0000:0b:00.2: psp enabled
ACPI: bus type USB registered
cryptd: max_cpu_qlen set to 1000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
libata version 3.00 loaded.
usbcore: registered new device driver usb
nvme nvme1: pci function 0000:03:00.0
nvme nvme0: pci function 0000:04:00.0
nvme nvme1: 32/0/0 default/read/poll queues
nvme nvme0: 32/0/0 default/read/poll queues
nvme1n1: p1 p2 p3 p4
nvme0n1: p1 p2
ahci 0000:08:00.0: version 3.0
ahci 0000:08:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x4 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host0: ahci
scsi host1: ahci
AVX2 version of gcm_enc/dec engaged.
scsi host2: ahci
AES CTR mode by8 optimization enabled
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfc700000 port 0xfc700200 irq 112
AMD-Vi: AMD IOMMUv2 loaded and initialized
ahci 0000:09:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x21 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
ata4: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600100 irq 126
ata5: DUMMY
ata6: DUMMY
ata7: DUMMY
ata8: DUMMY
ata9: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600380 irq 131
ahci 0000:0c:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x8 impl SATA mode
ahci 0000:0c:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host9: ahci
scsi host10: ahci
scsi host11: ahci
scsi host12: ahci
ata10: DUMMY
ata11: DUMMY
ata12: DUMMY
ata13: SATA max UDMA/133 abar m4096@0xfce08000 port 0xfce08280 irq 146
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
ata3.00: configured for UDMA/133
ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: ATA-11: Samsung SSD 860 EVO M.2 250GB, RVT24B6Q, max UDMA/133
ata9.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100
ata9.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
scsi 2:0:0:0: CD-ROM ASUS DRW-24D5MT 1.00 PQ: 0 ANSI: 5
ata4.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata9.00: configured for UDMA/100
ata13: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: Features: Trust Dev-Sleep NCQ-sndrcv
ata13.00: ATA-9: WDC WDS500G1B0B-00AS40, X41110WD, max UDMA/133
ata13.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata4.00: supports DRM functions and may not be fully accessible
ata13.00: Features: Dev-Sleep
ata13.00: configured for UDMA/133
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Attached scsi generic sg0 type 5
scsi 3:0:0:0: Direct-Access ATA Samsung SSD 860 4B6Q PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
ata4.00: Enabling discard_zeroes_data
sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sda] Preferred minimum I/O size 512 bytes
scsi 8:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0012 PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: Enabling discard_zeroes_data
sd 8:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
scsi 12:0:0:0: Direct-Access ATA WDC WDS500G1B0B- 10WD PQ: 0 ANSI: 5
sd 12:0:0:0: Attached scsi generic sg3 type 0
sd 12:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 12:0:0:0: [sdc] Write Protect is off
sd 12:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 12:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 12:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
sda: sda1 sda2
sd 3:0:0:0: [sda] supports TCG Opal
sd 3:0:0:0: [sda] Attached SCSI disk
sdc: sdc1 sdc2 sdc3
sd 12:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1
sd 8:0:0:0: [sdb] Attached SCSI disk
xhci_hcd 0000:07:00.1: xHCI Host Controller
xhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 1
xhci_hcd 0000:07:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
xhci_hcd 0000:07:00.1: xHCI Host Controller
xhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 2
xhci_hcd 0000:07:00.1: Host supports USB 3.1 Enhanced SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.5.9-1-default xhci-hcd
usb usb1: SerialNumber: 0000:07:00.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.5.9-1-default xhci-hcd
usb usb2: SerialNumber: 0000:07:00.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:07:00.3: xHCI Host Controller
xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:07:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
xhci_hcd 0000:07:00.3: xHCI Host Controller
xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:07:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.5.9-1-default xhci-hcd
usb usb3: SerialNumber: 0000:07:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.5.9-1-default xhci-hcd
usb usb4: SerialNumber: 0000:07:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:0b:00.3: xHCI Host Controller
xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0b:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410
xhci_hcd 0000:0b:00.3: xHCI Host Controller
xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:0b:00.3: Host supports USB 3.0 SuperSpeed
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 6.5.9-1-default xhci-hcd
usb usb5: SerialNumber: 0000:0b:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 6.5.9-1-default xhci-hcd
usb usb6: SerialNumber: 0000:0b:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
BTRFS: device fsid 1d89d4dc-a2e6-4211-9dd2-99193a120ffb devid 1 transid 104378 /dev/sdc3 scanned by (udev-worker) (455)
BTRFS: device fsid eb4b5695-1cb5-405d-b73a-6560a9cbd2b3 devid 1 transid 88649 /dev/sdc2 scanned by (udev-worker) (448)
sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
usb 1-1: new low-speed USB device number 2 using xhci_hcd
usb 3-4: new full-speed USB device number 2 using xhci_hcd
usb 5-3: new low-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=046d, idProduct=c05b, bcdDevice=54.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Optical Mouse
usb 1-1: Manufacturer: Logitech
usb 3-4: config 1 has an invalid interface number: 2 but max is 1
usb 3-4: config 1 has no interface number 1
usb 3-4: New USB device found, idVendor=0b05, idProduct=1939, bcdDevice= 1.00
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: AURA LED Controller
usb 3-4: Manufacturer: AsusTek Computer Inc.
usb 3-4: SerialNumber: 9876543210
usb 5-3: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3: Product: USB Keyboard
usb 5-3: Manufacturer: Logitech
usb 1-2: new high-speed USB device number 3 using xhci_hcd
usb 1-2: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.10
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-2: SerialNumber: E5044320
usb 5-4: new high-speed USB device number 3 using xhci_hcd
usb 1-4: new full-speed USB device number 4 using xhci_hcd
usb 1-4: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-4: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.10
usb 5-4: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 5-4: SerialNumber: B1307620
usb 1-6: new high-speed USB device number 5 using xhci_hcd
usb 1-6: New USB device found, idVendor=0bda, idProduct=0161, bcdDevice=61.23
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: USB2.0-CRW
usb 1-6: Manufacturer: Generic
usb 1-6: SerialNumber: 20070818000000000
usb-storage 1-6:1.1: USB Mass Storage device detected
scsi host13: usb-storage 1-6:1.1
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
[drm] amdgpu kernel modesetting enabled.
amdgpu: CRAT table disabled by module option
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
amdgpu 0000:0a:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1462:0x3417 0xE7).
[drm] register mmio base: 0xFCF00000
[drm] register mmio size: 262144
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
amdgpu 0000:0a:00.0: amdgpu: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: MS-V34113-F1
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
Console: switching to colour dummy device 80x25
amdgpu 0000:0a:00.0: vgaarb: deactivate vga console
amdgpu 0000:0a:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[drm] vm size is 256 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
amdgpu 0000:0a:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used)
amdgpu 0000:0a:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[drm] Detected VRAM RAM=8192M, BAR=256M
[drm] RAM width 256bits GDDR5
[drm] amdgpu: 8192M of VRAM memory ready
[drm] amdgpu: 32097M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.1/usb1/1-1/1-1:1.0/0003:046D:C05B.0001/input/input0
hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:07:00.1-1/input0
hid-generic 0003:0B05:1939.0002: hiddev96,hidraw1: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:07:00.3-4/input2
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:0b:00.3/usb5/5-3/5-3:1.0/0003:046D:C31C.0003/input/input1
[drm] Chained IB support enabled!
amdgpu: hwmgr_sw_init smu backed is polaris10_smu
[drm] Found UVD firmware Version: 1.130 Family ID: 16
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:0b:00.3-3/input0
input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:0b:00.3/usb5/5-3/5-3:1.1/0003:046D:C31C.0004/input/input2
[drm] Display Core v3.2.241 initialized on DCE 11.2
input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:07.1/0000:0b:00.3/usb5/5-3/5-3:1.1/0003:046D:C31C.0004/input/input3
hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:0b:00.3-3/input1
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
amdgpu: Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x67df:0x1002]
kfd kfd: amdgpu: added device 1002:67df
amdgpu 0000:0a:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 36
amdgpu 0000:0a:00.0: amdgpu: Using BACO for runtime pm
[drm] Initialized amdgpu 3.54.0 20150101 for 0000:0a:00.0 on minor 1
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:0a:00.0: [drm] fb0: amdgpudrmfb frame buffer device
BTRFS info (device sdc3): using crc32c (crc32c-intel) checksum algorithm
BTRFS info (device sdc3): using free space tree
BTRFS info (device sdc3): enabling ssd optimizations
BTRFS info (device sdc3): auto enabling async discard
systemd-journald[294]: Received SIGTERM from PID 1 (systemd).
scsi 13:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
scsi 13:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
scsi 13:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
scsi 13:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 13:0:0:0: Attached scsi generic sg4 type 0
sd 13:0:0:1: Attached scsi generic sg5 type 0
sd 13:0:0:2: Attached scsi generic sg6 type 0
sd 13:0:0:3: Attached scsi generic sg7 type 0
sd 13:0:0:0: [sdd] Media removed, stopped polling
sd 13:0:0:0: [sdd] Attached SCSI removable disk
sd 13:0:0:1: [sde] Media removed, stopped polling
sd 13:0:0:1: [sde] Attached SCSI removable disk
sd 13:0:0:2: [sdf] Media removed, stopped polling
sd 13:0:0:2: [sdf] Attached SCSI removable disk
sd 13:0:0:3: [sdg] Media removed, stopped polling
sd 13:0:0:3: [sdg] Attached SCSI removable disk
systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
systemd[1]: systemd 254.5+suse.10.gb53f364c26 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON -UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: bpf-lsm: LSM BPF program attached
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: initrd-switch-root.service: Deactivated successfully.
systemd[1]: Stopped Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice Slice /system/systemd-fsck.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Local Integrity Protected Volumes.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target System Time Set.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module dm_mod...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Load Kernel Module loop...
systemd[1]: plymouth-start.service: Deactivated successfully.
systemd[1]: plymouth-start.service: Unit process 551 (plymouthd) remains running after unit stopped.
loop: module loaded
fuse: init (API version 7.38)
systemd[1]: Stopped Show Plymouth Boot Screen.
systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: plymouth-switch-root.service: Deactivated successfully.
systemd[1]: Stopped Plymouth switch root service.
systemd[1]: systemd-fsck-root.service: Deactivated successfully.
systemd[1]: Stopped File System Check on Root Device.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd-journald[780]: Collecting audit messages is disabled.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: Started Journal Service.
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: button: Power Button [PWRF]
input: PC Speaker as /devices/platform/pcspkr/input/input6
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
acpi_cpufreq: overriding BIOS provided _PSD data
usbcore: registered new interface driver mceusb
DRBG: Continuing without Jitter RNG
mc: Linux media interface: v0.10
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Intel(R) 2.5G Ethernet Linux Driver
Copyright(c) 2018 Intel Corporation.
kvm_amd: TSC scaling supported
kvm_amd: Nested Virtualization enabled
kvm_amd: Nested Paging enabled
kvm_amd: SEV enabled (ASIDs 0 - 15)
kvm_amd: SEV-ES enabled (ASIDs 0 - 4294967295)
igc 0000:06:00.0: PCIe PTM not supported by PCIe bus/controller
kvm_amd: Virtual VMLOAD VMSAVE supported
kvm_amd: Virtual GIF supported
kvm_amd: LBR virtualization supported
Adding 33554428k swap on /dev/nvme0n1p1. Priority:-2 extents:1 across:33554428k SSFS
MCE: In-kernel MCE decoding enabled.
asus_wmi: ASUS WMI generic driver loaded
pps pps0: new PPS source ptp0
igc 0000:06:00.0 (unnamed net_device) (uninitialized): PHC added
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
videodev: Linux video capture interface: v2.00
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:05:00.0: enabling device (0000 -> 0002)
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
iwlwifi 0000:05:00.0: Detected crf-id 0x3617, cnv-id 0x100530 wfpm id 0x80000000
iwlwifi 0000:05:00.0: PCI dev 2723/0084, rev=0x340, rfid=0x10a100
igc 0000:06:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
igc 0000:06:00.0 eth0: MAC: 04:42:1a:93:dd:52
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
snd_hda_intel 0000:0a:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:0a:00.1: Force to non-snoop mode
igc 0000:06:00.0 enp6s0: renamed from eth0
snd_hda_intel 0000:0c:00.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:0a:00.1: bound 0000:0a:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input8
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input9
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input10
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input11
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input12
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input13
snd_hda_codec_realtek hdaudioC1D0: ALCS1200A: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALCS1200A: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
usbcore: registered new interface driver btusb
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input14
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input15
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input16
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input17
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input18
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input19
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input20
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input21
iwlwifi 0000:05:00.0: api flags index 2 larger than supported by driver
iwlwifi 0000:05:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
iwlwifi 0000:05:00.0: loaded firmware version 77.bd067429.0 cc-a0-77.ucode op_mode iwlmvm
Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
Bluetooth: hci0: Boot Address: 0x24800
Bluetooth: hci0: Firmware Version: 255-255.255
usb 1-4: USB disconnect, device number 4
Bluetooth: hci0: FW download error recovery failed (-19)
Bluetooth: hci0: sending frame failed (-19)
Bluetooth: hci0: Reading supported features failed (-19)
Bluetooth: hci0: Error reading debug features
Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
Bluetooth: hci0: sending frame failed (-19)
Bluetooth: hci0: Failed to read MSFT supported features (-19)
iwlwifi 0000:05:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
thermal thermal_zone0: failed to read out thermal zone (-61)
systemd-journald[780]: Received client request to flush runtime journal.
iwlwifi 0000:05:00.0: Detected RF HR B3, rfid=0x10a100
audit: type=1400 audit(1699148188.026:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=1178 comm="apparmor_parser"
audit: type=1400 audit(1699148188.026:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lessopen.sh" pid=1181 comm="apparmor_parser"
audit: type=1400 audit(1699148188.026:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1169 comm="apparmor_parser"
audit: type=1400 audit(1699148188.026:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1171 comm="apparmor_parser"
audit: type=1400 audit(1699148188.026:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1171 comm="apparmor_parser"
audit: type=1400 audit(1699148188.026:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=1167 comm="apparmor_parser"
audit: type=1400 audit(1699148188.026:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1183 comm="apparmor_parser"
audit: type=1400 audit(1699148188.026:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/locate" pid=1182 comm="apparmor_parser"
audit: type=1400 audit(1699148188.026:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-bgqd" pid=1173 comm="apparmor_parser"
audit: type=1400 audit(1699148188.026:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-dcerpcd" pid=1174 comm="apparmor_parser"
iwlwifi 0000:05:00.0: base HW address: b0:7d:64:f2:0d:9b
systemd-journald[780]: /var/log/journal/4ba9e295e90946fbbfabb7fb4ebc9c0c/system.journal: Journal file uses a different sequence number ID, rotating.
systemd-journald[780]: Rotating system journal.
iwlwifi 0000:05:00.0 wlp5s0: renamed from wlan0
usb 1-4: new full-speed USB device number 6 using xhci_hcd
usb 1-4: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017
Bluetooth: hci0: Device revision is 1
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
Bluetooth: hci0: Boot Address: 0x24800
Bluetooth: hci0: Firmware Version: 255-255.255
warning: `ksysguardd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usb 1-2: set resolution quirk: cval->res = 384
usb 1-2: Found UVC 1.00 device (046d:0825)
nct6775: Found NCT6798D or compatible chip at 0x2e:0x290
NET: Registered PF_QIPCRTR protocol family
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1317139 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 14610 usecs
Bluetooth: hci0: Malformed MSFT vendor event: 0x02
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
Bluetooth: hci0: Firmware revision 0.3 build 249 week 27 2023
Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
Bluetooth: MGMT ver 1.22
NET: Registered PF_ALG protocol family
usb 5-4: set resolution quirk: cval->res = 384
usbcore: registered new interface driver snd-usb-audio
usb 5-4: Found UVC 1.00 device (046d:0825)
usbcore: registered new interface driver uvcvideo
NET: Registered PF_PACKET protocol family
igc 0000:06:00.0 enp6s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
igc 0000:06:00.0 enp6s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
kauditd_printk_skb: 58 callbacks suppressed
audit: type=1400 audit(1699148196.218:70): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/bin/lxc-start" pid=1924 comm="apparmor_parser"
audit: type=1400 audit(1699148196.238:71): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default" pid=1928 comm="apparmor_parser"
audit: type=1400 audit(1699148196.238:72): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-cgns" pid=1928 comm="apparmor_parser"
audit: type=1400 audit(1699148196.238:73): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-mounting" pid=1928 comm="apparmor_parser"
audit: type=1400 audit(1699148196.238:74): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-nesting" pid=1928 comm="apparmor_parser"
systemd-journald[780]: /var/log/journal/4ba9e295e90946fbbfabb7fb4ebc9c0c/user-1000.journal: Journal file uses a different sequence number ID, rotating.
systemd-journald[780]: Time jumped backwards, rotating.
ksplashqml[2319]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
sctp: Hash tables configured (bind 1024/1024)
amdgpu 0000:0a:00.0: amdgpu: Disabling VM faults because of PRT request!