dmesg - 7zip-pstate
Linux version 5.19.7-2-pve (build@proxmox) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT_DYNAMIC PVE 5.19.7-2 (Tue, 04 Oct 2022 17:18:40 + ()
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
signal: max sigframe size: 3376
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009afefff] usable
BIOS-e820: [mem 0x0000000009aff000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS
BIOS-e820: [mem 0x000000000a20d000-0x00000000999f3fff] usable
BIOS-e820: [mem 0x00000000999f4000-0x00000000999f4fff] reserved
BIOS-e820: [mem 0x00000000999f5000-0x000000009aa54fff] usable
BIOS-e820: [mem 0x000000009aa55000-0x000000009aa55fff] reserved
BIOS-e820: [mem 0x000000009aa56000-0x00000000b8f5cfff] usable
BIOS-e820: [mem 0x00000000b8f5d000-0x00000000ba696fff] reserved
BIOS-e820: [mem 0x00000000ba697000-0x00000000ba6defff] ACPI data
BIOS-e820: [mem 0x00000000ba6df000-0x00000000bc157fff] ACPI NVS
BIOS-e820: [mem 0x00000000bc158000-0x00000000bcf77fff] reserved
BIOS-e820: [mem 0x00000000bcf78000-0x00000000bcffefff] type 20
BIOS-e820: [mem 0x00000000bcfff000-0x00000000bdffffff] usable
BIOS-e820: [mem 0x00000000be000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
BIOS-e820: [mem 0x00000000fd400000-0x00000000fd4fffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041e2fffff] usable
BIOS-e820: [mem 0x000000041e300000-0x000000043fffffff] reserved
NX (Execute Disable) protection: active
efi: EFI v2.70 by American Megatrends
efi: ACPI=0xbc13f000 ACPI 2.0=0xbc13f014 SMBIOS=0xbce25000 SMBIOS 3.0=0xbce24000 MEMATTR=0xb5af5018 ESRT=0xb4bea318
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: To Be Filled By O.E.M. X570M Pro4/X570M Pro4, BIOS P3.70 02/23/2022
tsc: Fast TSC calibration using PIT
tsc: Detected 3899.935 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x41e300 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000b4bea318 to 0x00000000b4bea350.
e820: update [mem 0xb4bea000-0xb4beafff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x313a9000-0x349cbfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BC13F014 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BC13E728 0000C4 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x00000000BA6D0000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BA6C9000 0063C6 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000BB139000 000040
ACPI: IVRS 0x00000000BA6DE000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: SSDT 0x00000000BA6D6000 0072B0 (v02 AMD QOGIR 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000BA6D2000 003ACF (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: SSDT 0x00000000BA6D1000 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: FIDT 0x00000000BA6C8000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BA6C7000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: AAFT 0x00000000BA6C6000 0000C9 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BA6C5000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000BA6C4000 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
ACPI: VFCT 0x00000000BA6B6000 00D884 (v01 ALASKA A M I 00000001 AMD 31504F47)
ACPI: SSDT 0x00000000BA6B2000 003E4C (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: CRAT 0x00000000BA6B1000 000B68 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: CDIT 0x00000000BA6B0000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: SSDT 0x00000000BA6AC000 003802 (v01 AMD QOGIRN 00000001 INTL 20120913)
ACPI: WSMT 0x00000000BA6AB000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: APIC 0x00000000BA6AA000 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000BA6A9000 000497 (v01 AMD QOGIRPRN 00000001 INTL 20120913)
ACPI: SSDT 0x00000000BA6A7000 0010AF (v01 AMD QOGIRC 00000001 INTL 20120913)
ACPI: FPDT 0x00000000BA6A6000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: Reserving FACP table memory at [mem 0xba6d0000-0xba6d0113]
ACPI: Reserving DSDT table memory at [mem 0xba6c9000-0xba6cf3c5]
ACPI: Reserving FACS table memory at [mem 0xbb139000-0xbb13903f]
ACPI: Reserving IVRS table memory at [mem 0xba6de000-0xba6de0cf]
ACPI: Reserving SSDT table memory at [mem 0xba6d6000-0xba6dd2af]
ACPI: Reserving SSDT table memory at [mem 0xba6d2000-0xba6d5ace]
ACPI: Reserving SSDT table memory at [mem 0xba6d1000-0xba6d10c7]
ACPI: Reserving FIDT table memory at [mem 0xba6c8000-0xba6c809b]
ACPI: Reserving MCFG table memory at [mem 0xba6c7000-0xba6c703b]
ACPI: Reserving AAFT table memory at [mem 0xba6c6000-0xba6c60c8]
ACPI: Reserving HPET table memory at [mem 0xba6c5000-0xba6c5037]
ACPI: Reserving SSDT table memory at [mem 0xba6c4000-0xba6c4023]
ACPI: Reserving VFCT table memory at [mem 0xba6b6000-0xba6c3883]
ACPI: Reserving SSDT table memory at [mem 0xba6b2000-0xba6b5e4b]
ACPI: Reserving CRAT table memory at [mem 0xba6b1000-0xba6b1b67]
ACPI: Reserving CDIT table memory at [mem 0xba6b0000-0xba6b0028]
ACPI: Reserving SSDT table memory at [mem 0xba6ac000-0xba6af801]
ACPI: Reserving WSMT table memory at [mem 0xba6ab000-0xba6ab027]
ACPI: Reserving APIC table memory at [mem 0xba6aa000-0xba6aa15d]
ACPI: Reserving SSDT table memory at [mem 0xba6a9000-0xba6a9496]
ACPI: Reserving SSDT table memory at [mem 0xba6a7000-0xba6a80ae]
ACPI: Reserving FPDT table memory at [mem 0xba6a6000-0xba6a6043]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041e2fffff]
NODE_DATA(0) allocated [mem 0x41e2d5000-0x41e2fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041e2fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009afefff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a20d000-0x00000000999f3fff]
node 0: [mem 0x00000000999f5000-0x000000009aa54fff]
node 0: [mem 0x000000009aa56000-0x00000000b8f5cfff]
node 0: [mem 0x00000000bcfff000-0x00000000bdffffff]
node 0: [mem 0x0000000100000000-0x000000041e2fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041e2fffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 1281 pages in unavailable ranges
On node 0, zone DMA32: 13 pages in unavailable ranges
On node 0, zone DMA32: 1 pages in unavailable ranges
On node 0, zone DMA32: 1 pages in unavailable ranges
On node 0, zone DMA32: 16546 pages in unavailable ranges
On node 0, zone Normal: 8192 pages in unavailable ranges
On node 0, zone Normal: 7424 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 32 CPUs, 20 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09aff000-0x09ffffff]
PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20cfff]
PM: hibernation: Registered nosave memory: [mem 0x999f4000-0x999f4fff]
PM: hibernation: Registered nosave memory: [mem 0x9aa55000-0x9aa55fff]
PM: hibernation: Registered nosave memory: [mem 0xb4bea000-0xb4beafff]
PM: hibernation: Registered nosave memory: [mem 0xb8f5d000-0xba696fff]
PM: hibernation: Registered nosave memory: [mem 0xba697000-0xba6defff]
PM: hibernation: Registered nosave memory: [mem 0xba6df000-0xbc157fff]
PM: hibernation: Registered nosave memory: [mem 0xbc158000-0xbcf77fff]
PM: hibernation: Registered nosave memory: [mem 0xbcf78000-0xbcffefff]
PM: hibernation: Registered nosave memory: [mem 0xbe000000-0xbfffffff]
PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd3fffff]
PM: hibernation: Registered nosave memory: [mem 0xfd400000-0xfd4fffff]
PM: hibernation: Registered nosave memory: [mem 0xfd500000-0xfe9fffff]
PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xc0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 3966552
Policy zone: Normal
Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.19.7-2-pve", will be passed to user space.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 15584996K/16118708K available (18440K kernel code, 4009K rwdata, 5800K rodata, 3100K init, 5016K bss, 533452K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 49730 entries in 195 pages
ftrace: allocated 195 pages with 4 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
random: crng init done
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20220331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x706e3b332eb, max_idle_ns: 881590993380 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7799.87 BogoMIPS (lpj=15599740)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V2 : User space: Vulnerable
Speculative Store Bypass: Vulnerable
Freeing SMP alternatives memory: 44K
smpboot: CPU0: AMD Ryzen 5 5600G with Radeon Graphics (family: 0x19, model: 0x50, stepping: 0x0)
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 5 and lim to 1.
cblist_init_generic: Setting shift to 5 and lim to 1.
cblist_init_generic: Setting shift to 5 and lim to 1.
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 3
smpboot: Total of 12 processors activated (93598.44 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20cfff] (53248 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0xba6df000-0xbc157fff] (27758592 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 11:05:59, date: 2022-10-19
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1666177559.144:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
fbcon: Taking over console
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 9 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 4 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec02fff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1630] type 00 class 0x060000
pci 0000:00:00.2: [1022:1631] type 00 class 0x080600
pci 0000:00:01.0: [1022:1632] type 00 class 0x060000
pci 0000:00:01.1: [1022:1633] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.2: [1022:1634] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1632] type 00 class 0x060000
pci 0000:00:02.1: [1022:1634] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: [1022:1633] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1632] type 00 class 0x060000
pci 0000:00:08.1: [1022:1635] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:1635] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:166a] type 00 class 0x060000
pci 0000:00:18.1: [1022:166b] type 00 class 0x060000
pci 0000:00:18.2: [1022:166c] type 00 class 0x060000
pci 0000:00:18.3: [1022:166d] type 00 class 0x060000
pci 0000:00:18.4: [1022:166e] type 00 class 0x060000
pci 0000:00:18.5: [1022:166f] type 00 class 0x060000
pci 0000:00:18.6: [1022:1670] type 00 class 0x060000
pci 0000:00:18.7: [1022:1671] type 00 class 0x060000
pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:02:00.0: [1022:57ad] type 01 class 0x060400
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link)
pci 0000:00:01.2: PCI bridge to [bus 02-09]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfbc00000-0xfc7fffff]
pci 0000:03:01.0: [1022:57a3] type 01 class 0x060400
pci 0000:03:01.0: enabling Extended Tags
pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
pci 0000:03:02.0: [1022:57a3] type 01 class 0x060400
pci 0000:03:02.0: enabling Extended Tags
pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
pci 0000:03:06.0: [1022:57a3] type 01 class 0x060400
pci 0000:03:06.0: enabling Extended Tags
pci 0000:03:06.0: PME# supported from D0 D3hot D3cold
pci 0000:03:08.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:08.0: enabling Extended Tags
pci 0000:03:08.0: PME# supported from D0 D3hot D3cold
pci 0000:03:09.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:09.0: enabling Extended Tags
pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
pci 0000:03:0a.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:0a.0: enabling Extended Tags
pci 0000:03:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-09]
pci 0000:02:00.0: bridge window [io 0xf000-0xffff]
pci 0000:02:00.0: bridge window [mem 0xfbc00000-0xfc7fffff]
pci 0000:04:00.0: [144d:a808] type 00 class 0x010802
pci 0000:04:00.0: reg 0x10: [mem 0xfc700000-0xfc703fff 64bit]
pci 0000:03:01.0: PCI bridge to [bus 04]
pci 0000:03:01.0: bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:05:00.0: [1d6a:11b1] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfc040000-0xfc04ffff 64bit]
pci 0000:05:00.0: reg 0x18: [mem 0xfc050000-0xfc050fff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xfbc00000-0xfbffffff 64bit]
pci 0000:05:00.0: reg 0x30: [mem 0xfc000000-0xfc03ffff pref]
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:02.0: PCI bridge to [bus 05]
pci 0000:03:02.0: bridge window [mem 0xfbc00000-0xfc0fffff]
pci 0000:06:00.0: [8086:1539] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xfc600000-0xfc61ffff]
pci 0000:06:00.0: reg 0x18: [io 0xf000-0xf01f]
pci 0000:06:00.0: reg 0x1c: [mem 0xfc620000-0xfc623fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:06.0: PCI bridge to [bus 06]
pci 0000:03:06.0: bridge window [io 0xf000-0xffff]
pci 0000:03:06.0: bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:07:00.0: [1022:1485] type 00 class 0x130000
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:07:00.1: [1022:149c] type 00 class 0x0c0330
pci 0000:07:00.1: reg 0x10: [mem 0xfc300000-0xfc3fffff 64bit]
pci 0000:07:00.1: enabling Extended Tags
pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
pci 0000:07:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:07:00.3: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit]
pci 0000:07:00.3: enabling Extended Tags
pci 0000:07:00.3: PME# supported from D0 D3hot D3cold
pci 0000:03:08.0: PCI bridge to [bus 07]
pci 0000:03:08.0: bridge window [mem 0xfc200000-0xfc3fffff]
pci 0000:08:00.0: [1022:7901] type 00 class 0x010601
pci 0000:08:00.0: reg 0x24: [mem 0xfc500000-0xfc5007ff]
pci 0000:08:00.0: enabling Extended Tags
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:03:09.0: PCI bridge to [bus 08]
pci 0000:03:09.0: bridge window [mem 0xfc500000-0xfc5fffff]
pci 0000:09:00.0: [1022:7901] type 00 class 0x010601
pci 0000:09:00.0: reg 0x24: [mem 0xfc400000-0xfc4007ff]
pci 0000:09:00.0: enabling Extended Tags
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:03:0a.0: PCI bridge to [bus 09]
pci 0000:03:0a.0: bridge window [mem 0xfc400000-0xfc4fffff]
pci 0000:0a:00.0: [c0a9:5407] type 00 class 0x010802
pci 0000:0a:00.0: reg 0x10: [mem 0xfce00000-0xfce03fff 64bit]
pci 0000:0a:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:02.1 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
pci 0000:00:02.1: PCI bridge to [bus 0a]
pci 0000:00:02.1: bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:0b:00.0: [144d:a808] type 00 class 0x010802
pci 0000:0b:00.0: reg 0x10: [mem 0xfcd00000-0xfcd03fff 64bit]
pci 0000:00:02.2: PCI bridge to [bus 0b]
pci 0000:00:02.2: bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:0c:00.0: [1002:1638] type 00 class 0x030000
pci 0000:0c:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:0c:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
pci 0000:0c:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:0c:00.0: reg 0x24: [mem 0xfcb00000-0xfcb7ffff]
pci 0000:0c:00.0: enabling Extended Tags
pci 0000:0c:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:0c:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:0c:00.1: [1002:1637] type 00 class 0x040300
pci 0000:0c:00.1: reg 0x10: [mem 0xfcb88000-0xfcb8bfff]
pci 0000:0c:00.1: enabling Extended Tags
pci 0000:0c:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:0c:00.2: [1022:15df] type 00 class 0x108000
pci 0000:0c:00.2: reg 0x18: [mem 0xfca00000-0xfcafffff]
pci 0000:0c:00.2: reg 0x24: [mem 0xfcb8c000-0xfcb8dfff]
pci 0000:0c:00.2: enabling Extended Tags
pci 0000:0c:00.3: [1022:1639] type 00 class 0x0c0330
pci 0000:0c:00.3: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit]
pci 0000:0c:00.3: enabling Extended Tags
pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.4: [1022:1639] type 00 class 0x0c0330
pci 0000:0c:00.4: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit]
pci 0000:0c:00.4: enabling Extended Tags
pci 0000:0c:00.4: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.6: [1022:15e3] type 00 class 0x040300
pci 0000:0c:00.6: reg 0x10: [mem 0xfcb80000-0xfcb87fff]
pci 0000:0c:00.6: enabling Extended Tags
pci 0000:0c:00.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcbfffff]
pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:0d:00.0: [1022:7901] type 00 class 0x010601
pci 0000:0d:00.0: reg 0x24: [mem 0xfcc01000-0xfcc017ff]
pci 0000:0d:00.0: enabling Extended Tags
pci 0000:0d:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:0d:00.1: [1022:7901] type 00 class 0x010601
pci 0000:0d:00.1: reg 0x24: [mem 0xfcc00000-0xfcc007ff]
pci 0000:0d:00.1: enabling Extended Tags
pci 0000:00:08.2: PCI bridge to [bus 0d]
pci 0000:00:08.2: bridge window [mem 0xfcc00000-0xfccfffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09aff000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x999f4000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9aa55000-0x9bffffff]
e820: reserve RAM buffer [mem 0xb4bea000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb8f5d000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x41e300000-0x41fffffff]
pci 0000:0c:00.0: vgaarb: setting as boot VGA device
pci 0000:0c:00.0: vgaarb: bridge control possible
pci 0000:0c:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:01: [mem 0x420000000-0x43fffffff window] has been reserved
system 00:03: [io 0x0280-0x028f] has been reserved
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: [io 0x02a0-0x02af] has been reserved
system 00:03: [io 0x02b0-0x02bf] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:02.1: bridge window [io 0x1000-0x0fff] to [bus 0a] add_size 1000
pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0a] add_size 200000 add_align 100000
clipped [mem size 0x00040000 64bit pref] to [mem size 0xfffffffffffe0000 64bit pref] for e820 entry [mem 0x000a0000-0x000fffff]
pci 0000:00:02.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:02.1: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:03:01.0: PCI bridge to [bus 04]
pci 0000:03:01.0: bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:03:02.0: PCI bridge to [bus 05]
pci 0000:03:02.0: bridge window [mem 0xfbc00000-0xfc0fffff]
pci 0000:03:06.0: PCI bridge to [bus 06]
pci 0000:03:06.0: bridge window [io 0xf000-0xffff]
pci 0000:03:06.0: bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:03:08.0: PCI bridge to [bus 07]
pci 0000:03:08.0: bridge window [mem 0xfc200000-0xfc3fffff]
pci 0000:03:09.0: PCI bridge to [bus 08]
pci 0000:03:09.0: bridge window [mem 0xfc500000-0xfc5fffff]
pci 0000:03:0a.0: PCI bridge to [bus 09]
pci 0000:03:0a.0: bridge window [mem 0xfc400000-0xfc4fffff]
pci 0000:02:00.0: PCI bridge to [bus 03-09]
pci 0000:02:00.0: bridge window [io 0xf000-0xffff]
pci 0000:02:00.0: bridge window [mem 0xfbc00000-0xfc7fffff]
pci 0000:00:01.2: PCI bridge to [bus 02-09]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfbc00000-0xfc7fffff]
pci 0000:00:02.1: PCI bridge to [bus 0a]
pci 0000:00:02.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.1: bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:00:02.1: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:02.2: PCI bridge to [bus 0b]
pci 0000:00:02.2: bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcbfffff]
pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:00:08.2: PCI bridge to [bus 0d]
pci 0000:00:08.2: bridge window [mem 0xfcc00000-0xfccfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec02fff window]
pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfc7fffff]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfc7fffff]
pci_bus 0000:04: resource 1 [mem 0xfc700000-0xfc7fffff]
pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfc0fffff]
pci_bus 0000:06: resource 0 [io 0xf000-0xffff]
pci_bus 0000:06: resource 1 [mem 0xfc600000-0xfc6fffff]
pci_bus 0000:07: resource 1 [mem 0xfc200000-0xfc3fffff]
pci_bus 0000:08: resource 1 [mem 0xfc500000-0xfc5fffff]
pci_bus 0000:09: resource 1 [mem 0xfc400000-0xfc4fffff]
pci_bus 0000:0a: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:0a: resource 1 [mem 0xfce00000-0xfcefffff]
pci_bus 0000:0a: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
pci_bus 0000:0b: resource 1 [mem 0xfcd00000-0xfcdfffff]
pci_bus 0000:0c: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0c: resource 1 [mem 0xfc800000-0xfcbfffff]
pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
pci_bus 0000:0d: resource 1 [mem 0xfcc00000-0xfccfffff]
pci 0000:0c:00.1: D0 power state depends on 0000:0c:00.0
pci 0000:0c:00.3: extending delay after power-on from D3hot to 20 msec
pci 0000:0c:00.4: extending delay after power-on from D3hot to 20 msec
PCI: CLS 64 bytes, default 64
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
Trying to unpack rootfs image as initramfs...
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.1: Adding to iommu group 1
pci 0000:00:01.2: Adding to iommu group 2
pci 0000:00:02.0: Adding to iommu group 3
pci 0000:00:02.1: Adding to iommu group 4
pci 0000:00:02.2: Adding to iommu group 5
pci 0000:00:08.0: Adding to iommu group 6
pci 0000:00:08.1: Adding to iommu group 7
pci 0000:00:08.2: Adding to iommu group 8
pci 0000:00:14.0: Adding to iommu group 9
pci 0000:00:14.3: Adding to iommu group 9
pci 0000:00:18.0: Adding to iommu group 10
pci 0000:00:18.1: Adding to iommu group 10
pci 0000:00:18.2: Adding to iommu group 10
pci 0000:00:18.3: Adding to iommu group 10
pci 0000:00:18.4: Adding to iommu group 10
pci 0000:00:18.5: Adding to iommu group 10
pci 0000:00:18.6: Adding to iommu group 10
pci 0000:00:18.7: Adding to iommu group 10
pci 0000:01:00.0: Adding to iommu group 11
pci 0000:02:00.0: Adding to iommu group 12
pci 0000:03:01.0: Adding to iommu group 13
pci 0000:03:02.0: Adding to iommu group 14
pci 0000:03:06.0: Adding to iommu group 15
pci 0000:03:08.0: Adding to iommu group 16
pci 0000:03:09.0: Adding to iommu group 17
pci 0000:03:0a.0: Adding to iommu group 18
pci 0000:04:00.0: Adding to iommu group 19
pci 0000:05:00.0: Adding to iommu group 20
pci 0000:06:00.0: Adding to iommu group 21
pci 0000:07:00.0: Adding to iommu group 16
pci 0000:07:00.1: Adding to iommu group 16
pci 0000:07:00.3: Adding to iommu group 16
pci 0000:08:00.0: Adding to iommu group 17
pci 0000:09:00.0: Adding to iommu group 18
pci 0000:0a:00.0: Adding to iommu group 22
pci 0000:0b:00.0: Adding to iommu group 23
pci 0000:0c:00.0: Adding to iommu group 24
pci 0000:0c:00.1: Adding to iommu group 25
pci 0000:0c:00.2: Adding to iommu group 26
pci 0000:0c:00.3: Adding to iommu group 27
pci 0000:0c:00.4: Adding to iommu group 28
pci 0000:0c:00.6: Adding to iommu group 29
pci 0000:0d:00.0: Adding to iommu group 30
pci 0000:0d:00.1: Adding to iommu group 31
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
AMD-Vi: Extended features (0x206d73ef22254ade): PPR X2APIC NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: X2APIC enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000b0a31000-0x00000000b4a31000] (64MB)
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.36)
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 55436K
alg: self-tests for CTR-KDF (hmac(sha256)) passed
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
pcieport 0000:00:01.1: PME: Signaling with IRQ 27
pcieport 0000:00:01.2: PME: Signaling with IRQ 28
pcieport 0000:00:02.1: PME: Signaling with IRQ 29
pcieport 0000:00:02.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
pcieport 0000:00:02.2: PME: Signaling with IRQ 30
pcieport 0000:00:08.1: PME: Signaling with IRQ 31
pcieport 0000:00:08.2: PME: Signaling with IRQ 32
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
Estimated ratio of average max frequency by base frequency (times 1024): 1119
Monitor-Mwait will be used to enter C-1 state
ACPI: \_PR_.C000: Found 3 idle states
ACPI: \_PR_.C002: Found 3 idle states
ACPI: \_PR_.C004: Found 3 idle states
ACPI: \_PR_.C006: Found 3 idle states
ACPI: \_PR_.C008: Found 3 idle states
ACPI: \_PR_.C00A: Found 3 idle states
ACPI: \_PR_.C001: Found 3 idle states
ACPI: \_PR_.C003: Found 3 idle states
ACPI: \_PR_.C005: Found 3 idle states
ACPI: \_PR_.C007: Found 3 idle states
ACPI: \_PR_.C009: Found 3 idle states
ACPI: \_PR_.C00B: Found 3 idle states
Linux agpgart interface v0.103
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2022-10-19T11:06:00 UTC (1666177560)
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c_dev: i2c /dev entries driver
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
Bridge firewalling registered
Key type dns_resolver registered
microcode: CPU0: patch_level=0x0a50000c
microcode: CPU1: patch_level=0x0a50000c
microcode: CPU2: patch_level=0x0a50000c
microcode: CPU3: patch_level=0x0a50000c
microcode: CPU4: patch_level=0x0a50000c
microcode: CPU5: patch_level=0x0a50000c
microcode: CPU6: patch_level=0x0a50000c
microcode: CPU7: patch_level=0x0a50000c
microcode: CPU8: patch_level=0x0a50000c
microcode: CPU9: patch_level=0x0a50000c
microcode: CPU10: patch_level=0x0a50000c
microcode: CPU11: patch_level=0x0a50000c
microcode: Microcode Update Driver: v2.2.
resctrl: L3 allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (599176393, 181766)->(603804743, -4446584)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 93200dc8d0b182d360164e03128838155045b91f'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 10:132:75
RAS: Correctable Errors collector initialized.
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 3100K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 344K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.19.7-2-pve
ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP0.VGA.LCD._BCM.AFN7], AE_NOT_FOUND (20220331/psargs-330)
Initialized Local Variables for Method [_BCM]:
Local0: 000000000c540e7d Integer 00000000000000FF
Local1: 000000001d8610a4 Integer 0000000000000000
Initialized Arguments for Method [_BCM]: (1 arguments defined for method invocation)
Arg0: 000000005954886b Integer 0000000000000064
ACPI Error: Aborting method \_SB.PCI0.GPP0.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
ACPI: \_SB_.PCI0.GPP0.VGA_.LCD_: _BCM evaluation failed
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input2
ACPI: video: Video Device [VGA1] (multi-head: yes rom: no post: no)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GP17.VGA.LCD._BCM.AFN7], AE_NOT_FOUND (20220331/psargs-330)
Initialized Local Variables for Method [_BCM]:
Local0: 00000000c1daf272 Integer 00000000000000FF
Local1: 000000007ca2984b Integer 0000000000000000
Initialized Arguments for Method [_BCM]: (1 arguments defined for method invocation)
Arg0: 0000000003424c80 Integer 0000000000000064
ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
ACPI: \_SB_.PCI0.GP17.VGA_.LCD_: _BCM evaluation failed
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:15/LNXVIDEO:01/input/input3
MACsec IEEE 802.1AE
dca service started, version 1.12.1
nvme nvme0: pci function 0000:01:00.0
nvme nvme1: pci function 0000:04:00.0
nvme nvme2: pci function 0000:0a:00.0
nvme nvme3: pci function 0000:0b:00.0
igb: Intel(R) Gigabit Ethernet Network Driver
igb: Copyright (c) 2007-2014 Intel Corporation.
igb 0000:06:00.0: enabling device (0000 -> 0002)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
ahci 0000:08:00.0: version 3.0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
ahci 0000:08:00.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf ilck led clo only pmp fbs pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfc500000 port 0xfc500100 irq 51
ata2: SATA max UDMA/133 abar m2048@0xfc500000 port 0xfc500180 irq 52
ata3: SATA max UDMA/133 abar m2048@0xfc500000 port 0xfc500200 irq 53
ata4: SATA max UDMA/133 abar m2048@0xfc500000 port 0xfc500280 irq 54
ahci 0000:09:00.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf ilck led clo only pmp fbs pio slum part
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata5: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400100 irq 79
ata6: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400180 irq 80
ata7: DUMMY
ata8: DUMMY
ata9: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400300 irq 83
ata10: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400380 irq 84
ahci 0000:0d:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0d:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host10: ahci
ata11: SATA max UDMA/133 abar m2048@0xfcc01000 port 0xfcc01100 irq 96
ahci 0000:0d:00.1: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0d:00.1: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host11: ahci
ata12: SATA max UDMA/133 abar m2048@0xfcc00000 port 0xfcc00100 irq 98
nvme nvme1: missing or invalid SUBNQN field.
nvme nvme1: Shutdown timeout set to 8 seconds
nvme nvme0: Shutdown timeout set to 10 seconds
nvme nvme3: Shutdown timeout set to 10 seconds
nvme nvme3: 32/0/0 default/read/poll queues
nvme nvme0: 32/0/0 default/read/poll queues
nvme3n1: p1
nvme3n1: p1 size 1953525168 extends beyond EOD, truncated
nvme0n1: p1
nvme0n1: p1 size 1953525168 extends beyond EOD, truncated
nvme nvme1: 32/0/0 default/read/poll queues
pps pps0: new PPS source ptp0
igb 0000:06:00.0: added PHC on eth0
igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) a8:a1:59:58:1f:05
igb 0000:06:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:06:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
nvme nvme2: 31/0/0 default/read/poll queues
nvme2n1: p1 p2 p3 p4 p5 p6
ata11: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: FORCE: horkage modified (noncq)
ata2.00: ATA-11: TOSHIBA MG09ACA18TE, 0104, max UDMA/133
ata2.00: 35156656128 sectors, multi 16: LBA48 NCQ (not used)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10.00: FORCE: horkage modified (noncq)
ata10.00: ATA-9: ST2000VM003-1ET164, SC11, max UDMA/133
ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (not used)
ata9.00: FORCE: horkage modified (noncq)
ata9.00: ATA-9: ST2000VM003-1ET164, SC11, max UDMA/133
ata9.00: 3907029168 sectors, multi 16: LBA48 NCQ (not used)
ata10.00: configured for UDMA/133
ata5.00: FORCE: horkage modified (noncq)
ata5.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA5C0, max UDMA/133
ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (not used)
ata9.00: configured for UDMA/133
ata5.00: configured for UDMA/133
ata3.00: FORCE: horkage modified (noncq)
ata3.00: ATA-11: TOSHIBA MG09ACA18TE, 0104, max UDMA/133
ata3.00: 35156656128 sectors, multi 16: LBA48 NCQ (not used)
ata4.00: FORCE: horkage modified (noncq)
ata4.00: ATA-11: TOSHIBA MG09ACA18TE, 0104, max UDMA/133
ata4.00: 35156656128 sectors, multi 16: LBA48 NCQ (not used)
ata1.00: FORCE: horkage modified (noncq)
ata1.00: ATA-11: TOSHIBA MG09ACA18TE, 0104, max UDMA/133
ata1.00: 35156656128 sectors, multi 16: LBA48 NCQ (not used)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: FORCE: horkage modified (noncq)
ata6.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA5C0, max UDMA/133
ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (not used)
ata6.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata4.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG09ACA1 0104 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA TOSHIBA MG09ACA1 0104 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 2:0:0:0: Direct-Access ATA TOSHIBA MG09ACA1 0104 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes
scsi 3:0:0:0: Direct-Access ATA TOSHIBA MG09ACA1 0104 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes
scsi 4:0:0:0: Direct-Access ATA Hitachi HDS5C302 A5C0 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access ATA Hitachi HDS5C302 A5C0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] Preferred minimum I/O size 512 bytes
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdf] Preferred minimum I/O size 512 bytes
scsi 8:0:0:0: Direct-Access ATA ST2000VM003-1ET1 SC11 PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg6 type 0
sd 8:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 8:0:0:0: [sdg] 4096-byte physical blocks
sd 8:0:0:0: [sdg] Write Protect is off
sd 8:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:0:0: [sdg] Preferred minimum I/O size 4096 bytes
scsi 9:0:0:0: Direct-Access ATA ST2000VM003-1ET1 SC11 PQ: 0 ANSI: 5
sd 9:0:0:0: Attached scsi generic sg7 type 0
sd 9:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 9:0:0:0: [sdh] 4096-byte physical blocks
sd 9:0:0:0: [sdh] Write Protect is off
sd 9:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 9:0:0:0: [sdh] Preferred minimum I/O size 4096 bytes
sdf: sdf1
sd 5:0:0:0: [sdf] Attached SCSI disk
sd 2:0:0:0: [sdc] Attached SCSI disk
sdg: sdg1
sd 8:0:0:0: [sdg] Attached SCSI disk
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 1:0:0:0: [sdb] Attached SCSI disk
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
sdh: sdh1
sd 9:0:0:0: [sdh] Attached SCSI disk
xhci_hcd 0000:07:00.1: xHCI Host Controller
xhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 1
xhci_hcd 0000:07:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
igb 0000:06:00.0 enp6s0: renamed from eth0
xhci_hcd 0000:07:00.1: xHCI Host Controller
xhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 2
xhci_hcd 0000:07:00.1: Host supports USB 3.1 Enhanced SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.19.7-2-pve xhci-hcd
usb usb1: SerialNumber: 0000:07:00.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.19.7-2-pve xhci-hcd
usb usb2: SerialNumber: 0000:07:00.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.3: xHCI Host Controller
xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:07:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
xhci_hcd 0000:07:00.3: xHCI Host Controller
xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:07:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.19.7-2-pve xhci-hcd
usb usb3: SerialNumber: 0000:07:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.19.7-2-pve xhci-hcd
usb usb4: SerialNumber: 0000:07:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:0c:00.3: xHCI Host Controller
xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0c:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
xhci_hcd 0000:0c:00.3: xHCI Host Controller
xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.19.7-2-pve xhci-hcd
usb usb5: SerialNumber: 0000:0c:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.19.7-2-pve xhci-hcd
usb usb6: SerialNumber: 0000:0c:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:0c:00.4: xHCI Host Controller
xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 7
xhci_hcd 0000:0c:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
xhci_hcd 0000:0c:00.4: xHCI Host Controller
xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 8
xhci_hcd 0000:0c:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 5.19.7-2-pve xhci-hcd
usb usb7: SerialNumber: 0000:0c:00.4
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 5.19.7-2-pve xhci-hcd
usb usb8: SerialNumber: 0000:0c:00.4
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
md/raid1:md3: active with 2 out of 2 mirrors
md3: detected capacity change from 0 to 1738752000
atlantic 0000:05:00.0 enp5s0: renamed from eth1
tsc: Refined TSC clocksource calibration: 3927.160 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x713728cf636, max_idle_ns: 881590730117 ns
raid6: avx2x4 gen() 46705 MB/s
raid6: avx2x2 gen() 36904 MB/s
raid6: avx2x1 gen() 24431 MB/s
raid6: using algorithm avx2x4 gen() 46705 MB/s
raid6: .... xor() 4895 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
clocksource: Switched to clocksource tsc
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
md/raid:md1: device sde operational as raid disk 3
md/raid:md1: device sdf operational as raid disk 2
md/raid:md1: device sdh operational as raid disk 1
md/raid:md1: device sdg operational as raid disk 0
md/raid:md2: device sdd operational as raid disk 3
md/raid:md2: device sdc operational as raid disk 2
md/raid:md2: device sdb operational as raid disk 1
md/raid:md2: device sda operational as raid disk 0
md/raid:md1: raid level 5 active with 4 out of 4 devices, algorithm 2
md/raid:md2: raid level 5 active with 4 out of 4 devices, algorithm 2
md2: detected capacity change from 0 to 105469175808
md1: detected capacity change from 0 to 11720300544
bcache: bch_journal_replay() journal replay done, 41 keys in 10 entries, seq 319927
bcache: register_cache() registered cache device md3
usb 5-1: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new full-speed USB device number 2 using xhci_hcd
usb 7-1: new high-speed USB device number 2 using xhci_hcd
usb 5-1: New USB device found, idVendor=1058, idProduct=25a3, bcdDevice=10.21
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: Elements 25A3
usb 5-1: Manufacturer: Western Digital
usb 5-1: SerialNumber: 37484B3330414148
bcache: register_bdev() registered backing device md2
usb 7-1: New USB device found, idVendor=2109, idProduct=2822, bcdDevice= 5.a3
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1: Product: USB2.0 Hub
usb 7-1: Manufacturer: VIA Labs, Inc.
usb 7-1: SerialNumber: 000000001
usb-storage 5-1:1.0: USB Mass Storage device detected
scsi host12: usb-storage 5-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
bcache: bch_cached_dev_attach() Caching md2 as bcache0 on set c0c843f6-e6aa-41ee-a2ad-0398dc1724a0
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 5 ports detected
bcache: register_bdev() registered backing device md1
bcache: bch_cached_dev_attach() Caching md1 as bcache1 on set c0c843f6-e6aa-41ee-a2ad-0398dc1724a0
usb 8-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 8-1: New USB device found, idVendor=2109, idProduct=8822, bcdDevice= 5.a3
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: USB3.1 Hub
usb 8-1: Manufacturer: VIA Labs, Inc.
usb 8-1: SerialNumber: 000000001
hub 8-1:1.0: USB hub found
hub 8-1:1.0: 4 ports detected
Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
BTRFS: device label md1 devid 1 transid 4568 /dev/bcache1 scanned by btrfs (449)
usb 7-1.5: new high-speed USB device number 3 using xhci_hcd
PM: Image not found (code -22)
EXT4-fs (nvme2n1p1): mounted filesystem with ordered data mode. Quota mode: none.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 7-1.5: New USB device found, idVendor=2109, idProduct=8818, bcdDevice= 0.01
usb 7-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1.5: Product: USB Billboard Device
usb 7-1.5: Manufacturer: VIA Labs, Inc.
usb 7-1.5: SerialNumber: 0000000000000001
systemd[1]: /etc/systemd/system/ryzen_monitor.service:5: Unknown key name 'SilentOnSuccess' in section 'Unit', ignoring.
systemd[1]: /etc/systemd/system/ryzen_monitor.service:6: Unknown key name 'SilentStartup' in section 'Unit', ignoring.
systemd[1]: /etc/systemd/system/rc-local.service:11: Support for option SysVStartPriority= has been removed and it is ignored
usb 8-1.1: new SuperSpeed USB device number 3 using xhci_hcd
systemd[1]: Queued start job for default target Multi-User System.
usb 8-1.1: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 6.14
usb 8-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1.1: Product: USB3.1 SATA Bridge
usb 8-1.1: Manufacturer: VIA Labs,Inc.
usb 8-1.1: SerialNumber: 0000000000003254
usb 8-1.1: UAS is ignored for this device, using usb-storage instead
usb-storage 8-1.1:1.0: USB Mass Storage device detected
usb-storage 8-1.1:1.0: Quirks match for vid 2109 pid 0715: 800000
scsi host13: usb-storage 8-1.1:1.0
scsi 12:0:0:0: Direct-Access WD Elements 25A3 1021 PQ: 0 ANSI: 6
sd 12:0:0:0: Attached scsi generic sg8 type 0
sd 12:0:0:0: [sdi] Very big device. Trying to use READ CAPACITY(16).
sd 12:0:0:0: [sdi] 15627986944 512-byte logical blocks: (8.00 TB/7.28 TiB)
sd 12:0:0:0: [sdi] 4096-byte physical blocks
sd 12:0:0:0: [sdi] Write Protect is off
sd 12:0:0:0: [sdi] Mode Sense: 47 00 10 08
sd 12:0:0:0: [sdi] No Caching mode page found
sd 12:0:0:0: [sdi] Assuming drive cache: write through
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-postfix.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Slices.
systemd[1]: Reached target System Time Set.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Network Service Netlink Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Finished Availability of block devices.
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in OpenVSwitch configuration for cleanup being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: [email protected]: Succeeded.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: [email protected]: Succeeded.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
EXT4-fs (nvme2n1p1): re-mounted. Quota mode: none.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Finished Load/Save Random Seed.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: Finished Create System Users.
systemd[1]: Condition check resulted in First Boot Complete being skipped.
ACPI: bus type drm_connector registered
systemd[1]: Starting Create Static Device Nodes in /dev...
sdi: sdi1
sd 12:0:0:0: [sdi] Attached SCSI disk
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Mounted RPC Pipe File System.
systemd[1]: [email protected]: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Starting pNFS block layout mapping daemon...
lp: driver loaded but no devices found
systemd[1]: Starting Rule-based Manager for Device Events and Files...
systemd[1]: Started pNFS block layout mapping daemon.
ppdev: user-space parallel port driver
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Started Rule-based Manager for Device Events and Files.
usb 8-1.2: new SuperSpeed USB device number 4 using xhci_hcd
systemd[1]: Finished Coldplug All udev Devices.
systemd[1]: Starting Wait for udev To Complete Device Initialization...
systemd[1]: Started Journal Service.
systemd-journald[539]: Received client request to flush runtime journal.
usb 8-1.2: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 6.14
usb 8-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1.2: Product: USB3.1 SATA Bridge
usb 8-1.2: Manufacturer: VIA Labs,Inc.
usb 8-1.2: SerialNumber: 0000000000003255
usb 8-1.2: UAS is ignored for this device, using usb-storage instead
usb-storage 8-1.2:1.0: USB Mass Storage device detected
usb-storage 8-1.2:1.0: Quirks match for vid 2109 pid 0715: 800000
scsi host14: usb-storage 8-1.2:1.0
ryzen_smu: loading out-of-tree module taints kernel.
ryzen_smu: CPUID: family 0x19, model 0x50, stepping 0x0, package 0x2
ryzen_smu: SMU v64.60.0
Adding 8284156k swap on /dev/nvme2n1p2. Priority:-2 extents:1 across:8284156k SSFS
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
input: PC Speaker as /devices/platform/pcspkr/input/input4
usb 8-1.3: new SuperSpeed USB device number 5 using xhci_hcd
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-16 Joules
BTRFS info (device bcache1): enabling ssd optimizations
BTRFS info (device bcache1): force zstd compression, level 1
BTRFS info (device bcache1): using free space tree
BTRFS info (device bcache1): has skinny extents
cryptd: max_cpu_qlen set to 1000
EXT4-fs (nvme2n1p3): mounted filesystem with ordered data mode. Quota mode: journalled.
bcache: register_bcache() error : device already registered
bcache: register_bcache() error : device already registered
usb 8-1.3: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 6.14
usb 8-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1.3: Product: USB3.1 SATA Bridge
usb 8-1.3: Manufacturer: VIA Labs,Inc.
usb 8-1.3: SerialNumber: 0000000000003256
usb 8-1.3: UAS is ignored for this device, using usb-storage instead
usb-storage 8-1.3:1.0: USB Mass Storage device detected
usb-storage 8-1.3:1.0: Quirks match for vid 2109 pid 0715: 800000
scsi host15: usb-storage 8-1.3:1.0
F2FS-fs (nvme1n1): Found nat_bits in checkpoint
usb 8-1.4: new SuperSpeed USB device number 6 using xhci_hcd
usb 8-1.4: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 6.14
usb 8-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1.4: Product: USB3.1 SATA Bridge
usb 8-1.4: Manufacturer: VIA Labs,Inc.
usb 8-1.4: SerialNumber: 0000000000003257
usb 8-1.4: UAS is ignored for this device, using usb-storage instead
usb-storage 8-1.4:1.0: USB Mass Storage device detected
usb-storage 8-1.4:1.0: Quirks match for vid 2109 pid 0715: 800000
scsi host16: usb-storage 8-1.4:1.0
bcache: register_bcache() error : device already registered
SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
XFS (bcache0): Mounting V5 Filesystem
nct6775: Found NCT6798D or compatible chip at 0x2e:0x290
F2FS-fs (nvme1n1): Mounted with checkpoint version = 32341d52
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
XFS (bcache0): Ending clean mount
ccp 0000:0c:00.2: enabling device (0000 -> 0002)
ccp 0000:0c:00.2: ccp: unable to access the device: you might be running a broken BIOS.
ccp 0000:0c:00.2: tee enabled
ccp 0000:0c:00.2: psp enabled
SVM: TSC scaling supported
kvm: Nested Virtualization enabled
SVM: kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
SVM: LBR virtualization supported
MCE: In-kernel MCE decoding enabled.
rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 5-... } 6 jiffies s: 25 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug): l=1:0-15:0x20/.
Task dump for CPU 5:
task:systemd-modules state:R running task stack: 0 pid: 543 ppid: 1 flags:0x00004008
Call Trace:
? __slab_free+0x219/0x320
__schedule+0x333/0x13d0
? x2apic_send_IPI_allbutself+0x13/0x20
? sysvec_apic_timer_interrupt+0x4e/0x90
? asm_sysvec_apic_timer_interrupt+0x1b/0x20
? l2arc_rebuild.isra.0+0x10e0/0x10e0 [zfs]
? vdev_rebuild_range+0x530/0x530 [zfs]
? avx512bw_rec_pqr+0x4f7/0x4f7 [zfs]
? vdev_rebuild_range+0x530/0x530 [zfs]
? find_kallsyms_symbol+0x79/0x1a0
? spa_free_bootprop+0x10/0x10 [zfs]
? spa_restart_removal+0xb0/0xb0 [zfs]
? module_address_lookup+0x68/0xc0
? spa_vdev_remove_cancel_check+0x30/0x30 [zfs]
? kallsyms_lookup_buildid+0xf8/0x180
? kallsyms_lookup+0x14/0x20
? test_for_valid_rec+0x38/0x80
? change_page_attr_set_clr+0x153/0x1c0
? ftrace_module_enable+0xad/0x3c0
? set_memory_x+0x40/0x50
? load_module+0x188f/0x21d0
? __do_sys_finit_module+0xc8/0x140
? __x64_sys_finit_module+0x1a/0x20
? do_syscall_64+0x59/0x90
? syscall_exit_to_user_mode+0x26/0x50
? __x64_sys_mmap+0x33/0x50
? do_syscall_64+0x69/0x90
? sysvec_call_function+0x4e/0x90
? entry_SYSCALL_64_after_hwframe+0x63/0xcd
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
snd_hda_intel 0000:0c:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:0c:00.6: enabling device (0000 -> 0002)
AMD-Vi: AMD IOMMUv2 loaded and initialized
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card0/input5
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card0/input6
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card0/input7
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card0/input8
ZFS: Loaded module v2.1.6-pve1, ZFS pool version 5000, ZFS filesystem version 5
snd_hda_codec_realtek hdaudioC1D0: ALCS1200A: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALCS1200A: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 6-... } 6 jiffies s: 29 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug): l=1:0-15:0x40/.
Task dump for CPU 6:
task:systemd-udevd state:R running task stack: 0 pid: 573 ppid: 560 flags:0x00004008
Call Trace:
? amdgpu_ctx_get_hw_prio.isra.0+0x100/0x100 [amdgpu]
? kallsyms_lookup_buildid+0xf8/0x180
? kallsyms_lookup+0x14/0x20
? test_for_valid_rec+0x38/0x80
? change_page_attr_set_clr+0x153/0x1c0
? ftrace_module_enable+0xad/0x3c0
? set_memory_x+0x40/0x50
? load_module+0x188f/0x21d0
? kernel_read_file+0x230/0x290
? __do_sys_finit_module+0xc8/0x140
? __x64_sys_finit_module+0x1a/0x20
? do_syscall_64+0x59/0x90
? syscall_exit_to_user_mode+0x26/0x50
? __x64_sys_mmap+0x33/0x50
? do_syscall_64+0x69/0x90
? __x64_sys_finit_module+0x1a/0x20
? do_syscall_64+0x69/0x90
? sysvec_call_function+0x4e/0x90
? entry_SYSCALL_64_after_hwframe+0x63/0xcd
usb 3-1: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 1.00
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
usb 3-1: Product: Ellipse ECO
usb 3-1: Manufacturer: EATON
usb 3-1: SerialNumber: 000000000
rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 6-... } 25 jiffies s: 29 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug): l=1:0-15:0x40/.
Task dump for CPU 6:
task:systemd-udevd state:R running task stack: 0 pid: 573 ppid: 560 flags:0x00004008
Call Trace:
? gfx_v8_0_get_clockgating_state+0xc0/0xc0 [amdgpu]
? kallsyms_lookup_buildid+0xf8/0x180
? kallsyms_lookup+0x14/0x20
? test_for_valid_rec+0x38/0x80
? change_page_attr_set_clr+0x153/0x1c0
? ftrace_module_enable+0xad/0x3c0
? set_memory_x+0x40/0x50
? load_module+0x188f/0x21d0
? kernel_read_file+0x230/0x290
? __do_sys_finit_module+0xc8/0x140
? __x64_sys_finit_module+0x1a/0x20
? do_syscall_64+0x59/0x90
? syscall_exit_to_user_mode+0x26/0x50
? __x64_sys_mmap+0x33/0x50
? do_syscall_64+0x69/0x90
? __x64_sys_finit_module+0x1a/0x20
? do_syscall_64+0x69/0x90
? sysvec_call_function+0x4e/0x90
? entry_SYSCALL_64_after_hwframe+0x63/0xcd
rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 6-... } 44 jiffies s: 29 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug): l=1:0-15:0x40/.
Task dump for CPU 6:
task:systemd-udevd state:R running task stack: 0 pid: 573 ppid: 560 flags:0x00004008
Call Trace:
? kgd_hqd_sdma_load+0x240/0x240 [amdgpu]
? kallsyms_lookup_buildid+0xf8/0x180
? kallsyms_lookup+0x14/0x20
? test_for_valid_rec+0x38/0x80
? change_page_attr_set_clr+0x153/0x1c0
? ftrace_module_enable+0xad/0x3c0
? set_memory_x+0x40/0x50
? load_module+0x188f/0x21d0
? kernel_read_file+0x230/0x290
? __do_sys_finit_module+0xc8/0x140
? __x64_sys_finit_module+0x1a/0x20
? do_syscall_64+0x59/0x90
? syscall_exit_to_user_mode+0x26/0x50
? __x64_sys_mmap+0x33/0x50
? do_syscall_64+0x69/0x90
? __x64_sys_finit_module+0x1a/0x20
? do_syscall_64+0x69/0x90
? sysvec_call_function+0x4e/0x90
? entry_SYSCALL_64_after_hwframe+0x63/0xcd
usb 3-4: new full-speed USB device number 3 using xhci_hcd
rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 6-... } 63 jiffies s: 29 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug): l=1:0-15:0x40/.
Task dump for CPU 6:
task:systemd-udevd state:R running task stack: 0 pid: 573 ppid: 560 flags:0x00004008
Call Trace:
? kv_dpm_is_idle+0x20/0x20 [amdgpu]
? kallsyms_lookup_buildid+0xf8/0x180
? kallsyms_lookup+0x14/0x20
? test_for_valid_rec+0x38/0x80
? change_page_attr_set_clr+0x153/0x1c0
? ftrace_module_enable+0xad/0x3c0
? set_memory_x+0x40/0x50
? load_module+0x188f/0x21d0
? kernel_read_file+0x230/0x290
? __do_sys_finit_module+0xc8/0x140
? __x64_sys_finit_module+0x1a/0x20
? do_syscall_64+0x59/0x90
? syscall_exit_to_user_mode+0x26/0x50
? __x64_sys_mmap+0x33/0x50
? do_syscall_64+0x69/0x90
? __x64_sys_finit_module+0x1a/0x20
? do_syscall_64+0x69/0x90
? sysvec_call_function+0x4e/0x90
? entry_SYSCALL_64_after_hwframe+0x63/0xcd
rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 6-... } 82 jiffies s: 29 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug): l=1:0-15:0x40/.
Task dump for CPU 6:
task:systemd-udevd state:R running task stack: 0 pid: 573 ppid: 560 flags:0x00004008
Call Trace:
? dce110_stream_encoder_dp_blank+0x140/0x140 [amdgpu]
? kallsyms_lookup_buildid+0xf8/0x180
? kallsyms_lookup+0x14/0x20
? test_for_valid_rec+0x38/0x80
? change_page_attr_set_clr+0x153/0x1c0
? ftrace_module_enable+0xad/0x3c0
? set_memory_x+0x40/0x50
? load_module+0x188f/0x21d0
? kernel_read_file+0x230/0x290
? __do_sys_finit_module+0xc8/0x140
? __x64_sys_finit_module+0x1a/0x20
? do_syscall_64+0x59/0x90
? syscall_exit_to_user_mode+0x26/0x50
? __x64_sys_mmap+0x33/0x50
? do_syscall_64+0x69/0x90
? __x64_sys_finit_module+0x1a/0x20
? do_syscall_64+0x69/0x90
? sysvec_call_function+0x4e/0x90
? entry_SYSCALL_64_after_hwframe+0x63/0xcd
usb 3-4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.03
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4: Product: USB Receiver
usb 3-4: Manufacturer: Logitech
EXT4-fs (sdi1): mounted filesystem with ordered data mode. Quota mode: journalled.
rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 6-... } 101 jiffies s: 29 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug): l=1:0-15:0x40/.
Task dump for CPU 6:
task:systemd-udevd state:R running task stack: 0 pid: 573 ppid: 560 flags:0x00004008
Call Trace:
? read_dce_straps+0x30/0x30 [amdgpu]
? kallsyms_lookup_buildid+0xf8/0x180
? kallsyms_lookup+0x14/0x20
? test_for_valid_rec+0x38/0x80
? change_page_attr_set_clr+0x153/0x1c0
? ftrace_module_enable+0xad/0x3c0
? set_memory_x+0x40/0x50
? load_module+0x188f/0x21d0
? kernel_read_file+0x230/0x290
? __do_sys_finit_module+0xc8/0x140
? __x64_sys_finit_module+0x1a/0x20
? do_syscall_64+0x59/0x90
? syscall_exit_to_user_mode+0x26/0x50
? __x64_sys_mmap+0x33/0x50
? do_syscall_64+0x69/0x90
? __x64_sys_finit_module+0x1a/0x20
? do_syscall_64+0x69/0x90
? sysvec_call_function+0x4e/0x90
? entry_SYSCALL_64_after_hwframe+0x63/0xcd
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input9
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input10
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input11
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input12
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input13
scsi 14:0:0:0: Direct-Access ST2000VM 003-1ET164 SC11 PQ: 0 ANSI: 6
scsi 13:0:0:0: Direct-Access ST2000VM 003-1ET164 SC11 PQ: 0 ANSI: 6
hid: raw HID events driver (C) Jiri Kosina
sd 14:0:0:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 14:0:0:0: Attached scsi generic sg9 type 0
sd 14:0:0:0: [sdj] Write Protect is off
sd 14:0:0:0: [sdj] Mode Sense: 2f 00 00 00
sd 13:0:0:0: Attached scsi generic sg10 type 0
[drm] amdgpu kernel modesetting enabled.
sd 13:0:0:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
sd 14:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
amdgpu 0000:0c:00.0: vgaarb: deactivate vga console
amdgpu 0000:0c:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (RENOIR 0x1002:0x1638 0x1002:0x1636 0xC9).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 524288
sd 13:0:0:0: [sdk] Write Protect is off
sd 13:0:0:0: [sdk] Mode Sense: 2f 00 00 00
sd 13:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
[drm] add ip block number 9
amdgpu 0000:0c:00.0: amdgpu: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 13-CEZANNE-019
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
amdgpu 0000:0c:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
amdgpu 0000:0c:00.0: amdgpu: PCIE atomic ops is not supported
amdgpu 0000:0c:00.0: amdgpu: MODE2 reset
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:0c:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
amdgpu 0000:0c:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
amdgpu 0000:0c:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=512M, BAR=512M
[drm] RAM width 128bits DDR4
[drm] amdgpu: 512M of VRAM memory ready
[drm] amdgpu: 7682M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F400900000
amdgpu 0000:0c:00.0: amdgpu: PSP runtime database doesn't exist
amdgpu 0000:0c:00.0: amdgpu: PSP runtime database doesn't exist
[drm] Loading DMUB firmware via PSP: version=0x0101001F
[drm] Found VCN firmware Version ENC: 1.17 DEC: 5 VEP: 0 Revision: 2
amdgpu 0000:0c:00.0: amdgpu: Will use PSP to load VCN firmware
sdj: sdj1
sd 14:0:0:0: [sdj] Attached SCSI disk
sdk: sdk1
sd 13:0:0:0: [sdk] Attached SCSI disk
scsi 15:0:0:0: Direct-Access ST2000VM 003-1ET164 SC11 PQ: 0 ANSI: 6
scsi 16:0:0:0: Direct-Access ST2000VM 003-1ET164 SC11 PQ: 0 ANSI: 6
sd 15:0:0:0: Attached scsi generic sg11 type 0
sd 16:0:0:0: Attached scsi generic sg12 type 0
sd 15:0:0:0: [sdl] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 16:0:0:0: [sdm] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 15:0:0:0: [sdl] Write Protect is off
sd 15:0:0:0: [sdl] Mode Sense: 2f 00 00 00
sd 16:0:0:0: [sdm] Write Protect is off
sd 16:0:0:0: [sdm] Mode Sense: 2f 00 00 00
sd 15:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 16:0:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[drm] reserve 0x400000 from 0xf41f800000 for PSP TMR
sdl: sdl1
sd 15:0:0:0: [sdl] Attached SCSI disk
sdm: sdm1
sd 16:0:0:0: [sdm] Attached SCSI disk
md/raid:md0: device sdm operational as raid disk 3
md/raid:md0: device sdl operational as raid disk 2
md/raid:md0: device sdj operational as raid disk 1
md/raid:md0: device sdk operational as raid disk 0
md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2
amdgpu 0000:0c:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:0c:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:0c:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu 0000:0c:00.0: amdgpu: SMU is initialized successfully!
------------[ cut here ]------------
WARNING: CPU: 9 PID: 573 at drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c:98 rn_vbios_smu_send_msg_with_param+0xfd/0x110 [amdgpu]
Modules linked in: usbhid(+) fjes(-) hid tcp_bbr sch_fq amdgpu(+) snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi iommu_v2 gpu_sched drm_ttm_helper ttm snd_hda_intel snd_intel_dspcfg drm_display_helper snd_intel_sdw_acpi snd_hda_codec cec snd_hda_core rc_core snd_hwdep intel_rapl_msr drm_kms_helper snd_pcm intel_rapl_common fb_sys_fops snd_timer syscopyarea snd sysfillrect sysimgblt soundcore zfs(PO) zunicode(PO) zzstd(O) edac_mce_amd zlua(O) zavl(PO) icp(PO) kvm_amd zcommon(PO) znvpair(PO) ccp spl(O) kvm msr nct6775 irqbypass nct6775_core crct10dif_pclmul hwmon_vid ghash_clmulni_intel quota_v2 macvlan quota_tree aesni_intel crypto_simd xfs f2fs cryptd crc32_generic lz4hc_compress lz4_compress rapl wmi_bmof pcspkr efi_pstore k10temp ryzen_smu(O) mac_hid drivetemp parport_pc ppdev lp parport drm sunrpc ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid0 multipath linear simplefb uas usb_storage raid456 async_raid6_recov async_memcpy
async_pq async_xor async_tx xor raid6_pq libcrc32c bcache raid1 xhci_pci xhci_pci_renesas crc32_pclmul ahci i2c_piix4 igb libahci i2c_algo_bit xhci_hcd nvme atlantic dca macsec nvme_core wmi video
CPU: 9 PID: 573 Comm: systemd-udevd Tainted: P O 5.19.7-2-pve #1
Hardware name: To Be Filled By O.E.M. X570M Pro4/X570M Pro4, BIOS P3.70 02/23/2022
RIP: 0010:rn_vbios_smu_send_msg_with_param+0xfd/0x110 [amdgpu]
Code: 24 48 c7 c2 c0 46 42 c2 be 93 62 01 00 e8 0b 92 e8 ff 5b 41 5c 41 5d 41 5e 5d c3 cc cc cc cc 3d fe 00 00 00 74 d7 0f 0b eb d3 0b e9 51 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 0f 1f 44
RSP: 0018:ffffa62a8139f460 EFLAGS: 00010202
RAX: 00000000000000fe RBX: 0000000000030d41 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 000000000001629b RDI: ffff8b2348f00000
RBP: ffffa62a8139f480 R08: ffffffffc2693cc0 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff8b234fb78800
R13: 000000000000000d R14: 0000000000000001 R15: 0000000000000003
FS: 00007f72fcc458c0(0000) GS:ffff8b260bc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b0fcd5cac0 CR3: 000000013bc34000 CR4: 0000000000750ee0
PKRU: 55555554
Call Trace:
rn_vbios_smu_enable_48mhz_tmdp_refclk_pwrdwn+0x17/0x20 [amdgpu]
rn_clk_mgr_construct+0x13c/0xe50 [amdgpu]
dc_clk_mgr_create+0x40a/0x570 [amdgpu]
dc_create+0x24e/0x640 [amdgpu]
? dmi_matches+0xa0/0x220
amdgpu_dm_init.isra.0+0x219/0x320 [amdgpu]
? dev_vprintk_emit+0x168/0x18f
? dev_printk_emit+0x4e/0x69
dm_hw_init+0x13/0x30 [amdgpu]
amdgpu_device_init.cold+0x1a8c/0x1fbe [amdgpu]
? pci_read_config_word+0x27/0x40
? do_pci_enable_device.part.0+0xc0/0xf0
amdgpu_driver_load_kms+0x1c/0x160 [amdgpu]
amdgpu_pci_probe+0x173/0x3b0 [amdgpu]
local_pci_probe+0x48/0x90
? pci_match_device+0xe2/0x140
pci_device_probe+0xc8/0x270
really_probe+0x1d3/0x3b0
__driver_probe_device+0x119/0x190
driver_probe_device+0x23/0xc0
__driver_attach+0xbd/0x200
? __device_attach_driver+0x120/0x120
bus_for_each_dev+0x7c/0xd0
driver_attach+0x1e/0x30
bus_add_driver+0x178/0x220
driver_register+0x91/0x100
__pci_register_driver+0x68/0x70
amdgpu_init+0x6e/0x1000 [amdgpu]
? 0xffffffffc15ea000
do_one_initcall+0x46/0x210
? kmem_cache_alloc_trace+0x1a6/0x320
do_init_module+0x52/0x210
load_module+0x1d9c/0x21d0
? kernel_read_file+0x230/0x290
__do_sys_finit_module+0xc8/0x140
__x64_sys_finit_module+0x1a/0x20
do_syscall_64+0x59/0x90
? syscall_exit_to_user_mode+0x26/0x50
? __x64_sys_mmap+0x33/0x50
? do_syscall_64+0x69/0x90
? __x64_sys_finit_module+0x1a/0x20
? do_syscall_64+0x69/0x90
? sysvec_call_function+0x4e/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f72fce083a9
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 3d 01 f0 ff ff 73 01 c3 48 8b 0d b7 8a 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffcc5007ed8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000559b9c316410 RCX: 00007f72fce083a9
RDX: 0000000000000000 RSI: 00007f72fcfa5e2d RDI: 000000000000001a
RBP: 0000000000020000 R08: 0000000000000000 R09: 0000559b9c1df610
R10: 000000000000001a R11: 0000000000000246 R12: 00007f72fcfa5e2d
R13: 0000000000000000 R14: 0000559b9c30cec0 R15: 0000559b9c316410
---[ end trace 0000000000000000 ]---
[drm] Display Core initialized with v3.2.187!
[drm] DMUB hardware initialized: version=0x0101001F
snd_hda_intel 0000:0c:00.1: bound 0000:0c:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
amdgpu: sdma_bitmap: 3
md0: detected capacity change from 0 to 11720294400
memmap_init_zone_device initialised 131072 pages in 0ms
amdgpu: HMM registered 512MB device memory
amdgpu: SRAT table not found
amdgpu: Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x1638:0x1002]
kfd kfd: amdgpu: added device 1002:1638
amdgpu 0000:0c:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 7
amdgpu 0000:0c:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:0c:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:0c:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:0c:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:0c:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:0c:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:0c:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:0c:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:0c:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:0c:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:0c:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
amdgpu 0000:0c:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
amdgpu 0000:0c:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
amdgpu 0000:0c:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
amdgpu 0000:0c:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[drm] Initialized amdgpu 3.47.0 20150101 for 0000:0c:00.0 on minor 0
amdgpu 0000:0c:00.0: [drm] Cannot find any crtc or sizes
[drm] DSC precompute is not needed.
bcache: register_bdev() registered backing device md0
bcache: bch_cached_dev_attach() Caching md0 as bcache2 on set c0c843f6-e6aa-41ee-a2ad-0398dc1724a0
XFS (bcache2): Mounting V5 Filesystem
XFS (bcache2): Ending clean mount
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver usbmouse
usbcore: registered new interface driver usbkbd
hid-generic 0003:0463:FFFF.0001: hiddev0,hidraw0: USB HID v10.10 Device [EATON Ellipse ECO] on usb-0000:07:00.3-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.3/usb3/3-4/3-4:1.0/0003:046D:C52B.0002/input/input14
hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:07:00.3-4/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.3/usb3/3-4/3-4:1.1/0003:046D:C52B.0003/input/input15
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.3/usb3/3-4/3-4:1.1/0003:046D:C52B.0003/input/input16
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.3/usb3/3-4/3-4:1.1/0003:046D:C52B.0003/input/input17
hid-generic 0003:046D:C52B.0003: input,hiddev1,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:07:00.3-4/input1
hid-generic 0003:046D:C52B.0004: hiddev2,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:07:00.3-4/input2
logitech-djreceiver 0003:046D:C52B.0004: hiddev1,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:07:00.3-4/input2
input: Logitech Wireless Device PID:4031 Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.3/usb3/3-4/3-4:1.2/0003:046D:C52B.0004/0003:046D:4031.0005/input/input19
hid-generic 0003:046D:4031.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Device PID:4031] on usb-0000:07:00.3-4/input2:1
input: Logitech Wireless Device PID:2011 Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.3/usb3/3-4/3-4:1.2/0003:046D:C52B.0004/0003:046D:2011.0006/input/input23
hid-generic 0003:046D:2011.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Device PID:2011] on usb-0000:07:00.3-4/input2:2
input: Logitech Wireless Device PID:4024 Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.3/usb3/3-4/3-4:1.2/0003:046D:C52B.0004/0003:046D:4024.0007/input/input27
input: Logitech Wireless Device PID:4024 Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.3/usb3/3-4/3-4:1.2/0003:046D:C52B.0004/0003:046D:4024.0007/input/input28
hid-generic 0003:046D:4024.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4024] on usb-0000:07:00.3-4/input2:3
input: Logitech M310/M310t as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.3/usb3/3-4/3-4:1.2/0003:046D:C52B.0004/0003:046D:4031.0005/input/input32
logitech-hidpp-device 0003:046D:4031.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M310/M310t] on usb-0000:07:00.3-4/input2:1
input: Logitech K520 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.3/usb3/3-4/3-4:1.2/0003:046D:C52B.0004/0003:046D:2011.0006/input/input33
logitech-hidpp-device 0003:046D:2011.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:07:00.3-4/input2:2
input: Logitech K400 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.3/usb3/3-4/3-4:1.2/0003:046D:C52B.0004/0003:046D:4024.0007/input/input34
logitech-hidpp-device 0003:046D:4024.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:07:00.3-4/input2:3
Process accounting resumed
atlantic 0000:05:00.0 enp5s0: atlantic: link change old 0 new 2500
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
Initializing XFRM netlink socket
docker0: port 1(veth3eb255c) entered blocking state
docker0: port 1(veth3eb255c) entered disabled state
device veth3eb255c entered promiscuous mode
docker0: port 1(veth3eb255c) entered blocking state
docker0: port 1(veth3eb255c) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
docker0: port 1(veth3eb255c) entered disabled state
docker0: port 2(veth7a12214) entered blocking state
docker0: port 2(veth7a12214) entered disabled state
device veth7a12214 entered promiscuous mode
docker0: port 2(veth7a12214) entered blocking state
docker0: port 2(veth7a12214) entered forwarding state
docker0: port 3(veth8f597a0) entered blocking state
docker0: port 3(veth8f597a0) entered disabled state
device veth8f597a0 entered promiscuous mode
docker0: port 3(veth8f597a0) entered blocking state
docker0: port 3(veth8f597a0) entered forwarding state
docker0: port 4(veth0af7bd3) entered blocking state
docker0: port 4(veth0af7bd3) entered disabled state
device veth0af7bd3 entered promiscuous mode
docker0: port 4(veth0af7bd3) entered blocking state
docker0: port 4(veth0af7bd3) entered forwarding state
docker0: port 5(veth49b97a9) entered blocking state
docker0: port 5(veth49b97a9) entered disabled state
device veth49b97a9 entered promiscuous mode
docker0: port 5(veth49b97a9) entered blocking state
docker0: port 5(veth49b97a9) entered forwarding state
eth0: renamed from veth3feb342
docker0: port 6(veth4474817) entered blocking state
docker0: port 6(veth4474817) entered disabled state
device veth4474817 entered promiscuous mode
docker0: port 6(veth4474817) entered blocking state
docker0: port 6(veth4474817) entered forwarding state
docker0: port 2(veth7a12214) entered disabled state
docker0: port 3(veth8f597a0) entered disabled state
docker0: port 4(veth0af7bd3) entered disabled state
docker0: port 5(veth49b97a9) entered disabled state
docker0: port 6(veth4474817) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): veth3eb255c: link becomes ready
docker0: port 1(veth3eb255c) entered blocking state
docker0: port 1(veth3eb255c) entered forwarding state
eth0: renamed from veth36f3b80
IPv6: ADDRCONF(NETDEV_CHANGE): veth7a12214: link becomes ready
docker0: port 2(veth7a12214) entered blocking state
docker0: port 2(veth7a12214) entered forwarding state
docker0: port 7(veth0bc5724) entered blocking state
docker0: port 7(veth0bc5724) entered disabled state
device veth0bc5724 entered promiscuous mode
docker0: port 7(veth0bc5724) entered blocking state
docker0: port 7(veth0bc5724) entered forwarding state
eth0: renamed from vethafd6da0
eth0: renamed from vethf43239b
eth0: renamed from veth8fecd5e
docker0: port 7(veth0bc5724) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): veth49b97a9: link becomes ready
docker0: port 5(veth49b97a9) entered blocking state
docker0: port 5(veth49b97a9) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): veth4474817: link becomes ready
docker0: port 6(veth4474817) entered blocking state
docker0: port 6(veth4474817) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): veth0af7bd3: link becomes ready
docker0: port 4(veth0af7bd3) entered blocking state
docker0: port 4(veth0af7bd3) entered forwarding state
eth0: renamed from veth95f6b64
eth0: renamed from veth33d84d0
IPv6: ADDRCONF(NETDEV_CHANGE): veth8f597a0: link becomes ready
docker0: port 3(veth8f597a0) entered blocking state
docker0: port 3(veth8f597a0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): veth0bc5724: link becomes ready
docker0: port 7(veth0bc5724) entered blocking state
docker0: port 7(veth0bc5724) entered forwarding state
bpfilter: Loaded bpfilter_umh pid 13826
Started bpfilter
docker0: port 6(veth4474817) entered disabled state
veth8fecd5e: renamed from eth0
docker0: port 6(veth4474817) entered disabled state
device veth4474817 left promiscuous mode
docker0: port 6(veth4474817) entered disabled state
docker0: port 6(veth20415a3) entered blocking state
docker0: port 6(veth20415a3) entered disabled state
device veth20415a3 entered promiscuous mode
docker0: port 6(veth20415a3) entered blocking state
docker0: port 6(veth20415a3) entered forwarding state
eth0: renamed from vethc0f2173
IPv6: ADDRCONF(NETDEV_CHANGE): veth20415a3: link becomes ready
msr: Write to unrecognized MSR 0x49 by wrmsr (pid: 20817).
msr: See for details.
usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -110
usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -75
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: configured for UDMA/133
Attempt to set a LOCK_MAND lock via flock(2). This support has been removed and the request ignored.
process 'pts/cpuminer-opt-1.5.1/cpuminer-opt-3.18.0/cpuminer' started with executable stack