dmesg - withsolutionpts
__hwasan_loadN_noabort worked !!
__hwasan_tag_memory worked
Booting Linux on physical CPU 0x0000000000 [0x410fd083]
Linux version 5.15.30-v8+ (root@ubuntu) (aarch64-linux-gnu-gcc (Ubuntu 11.2.0-5ubuntu1) 11.2.0, GNU ld (GNU Binutils for Ubuntu) 2.37) #523 SMP PREEMPT Wed Jul 20 05:57:07 PDT 2022
random: fast init done
Machine model: Raspberry Pi 4 Model B Rev 1.2
efi: UEFI not found.
Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Zone ranges:
DMA [mem 0x0000000000000000-0x000000003fffffff]
DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x000000003b3fffff]
node 0: [mem 0x0000000040000000-0x00000000fbffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
The address value is :288230101434727920
__hwasan_storeN_noabort worked !!
The address value is :(____ptrval____)
The size value : 4
==================================================================
BUG: KASAN: invalid-access in setup_arch+0x67c/0x838
Write of size 4 at addr 03ffffc009977df0 by task swapper/0
Pointer tag: [03], memory tag: [fe]
CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.30-v8+ #523
Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT)
Call trace:
dump_backtrace+0x0/0x330
show_stack+0x24/0x30
dump_stack_lvl+0x8c/0xb8
print_address_description+0x7c/0x27c
kasan_report+0x220/0x288
kasan_check_range+0xb4/0x24c
__hwasan_store4_noabort+0x3c/0x50
setup_arch+0x67c/0x838
start_kernel+0xec/0x7f4
__primary_switched+0xa8/0xb0
Memory state around the buggy address:
ffffffc009977b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc009977c00: 00 00 00 fe fe fe fe 00 00 00 00 fe fe 00 00 00
>ffffffc009977d00: 00 fe fe 00 00 00 fe fe fe fe fe fe fe fe fe fe
^
ffffffc009977e00: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
ffffffc009977f00: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
==================================================================
Disabling lock debugging due to kernel taint
The address value is :216172507396800000
The address value is :(____ptrval____)
The size value : 4
The address value is :288230101434727924
The address value is :(____ptrval____)
The size value : 4
The address value is :216172507396800004
The address value is :(____ptrval____)
The size value : 4
The address value is :288230101434727928
The address value is :(____ptrval____)
The size value : 4
The address value is :216172507396800008
The address value is :(____ptrval____)
The size value : 4
The address value is :288230101434727932
The address value is :(____ptrval____)
The size value : 4
The address value is :216172507396800012
The address value is :(____ptrval____)
The size value : 4
kasan: Test var is equal : 15
kasan: KernelAddressSanitizer initialized
percpu: Embedded 35 pages/cpu s105816 r8192 d29352 u143360
pcpu-alloc: s105816 r8192 d29352 u143360 alloc=35*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Detected PIPT I-cache on CPU0
CPU features: detected: Spectre-v2
CPU features: detected: Spectre-v4
CPU features: detected: Spectre-BHB
CPU features: detected: ARM errata 1165522, 1319367, or 1530923
Built 1 zonelists, mobility grouping on. Total pages: 996912
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
Memory: 3283500K/4050944K available (17600K kernel code, 2084K rwdata, 4312K rodata, 4032K init, 1040K bss, 439764K reserved, 327680K cma-reserved)
The KASAN_SHADOW_OFFSET value is : efffffc000000000
The KASAN_GRANULE_SIZE value is : 16
The KASAN_SHADOW_SCALE_SHIFT value is : 4
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 36857 entries in 144 pages
ftrace: allocated 144 pages with 2 groups
trace event string verifier disabled
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Root IRQ handler: gic_handle_irq
GIC: Using split EOI/Deactivate mode
irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10)
random: get_random_bytes called from start_kernel+0x5bc/0x7f4 with crng_init=1
arch_timer: cp15 timer(s) running at 54.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
Console: colour dummy device 80x25
printk: console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
cgroup: Disabling memory control group subsystem
rcu: Hierarchical SRCU implementation.
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected PIPT I-cache on CPU1
CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
Detected PIPT I-cache on CPU2
CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
Detected PIPT I-cache on CPU3
CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected: 32-bit EL0 Support
CPU features: detected: 32-bit EL1 Support
CPU features: detected: CRC32 instructions
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
Enabled cp15_barrier support
Enabled setend support
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
DMI not present or invalid.
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.528:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'step_wise'
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 65536 entries
bcm2835-mbox fe00b880.mailbox: mailbox enabled
raspberrypi-firmware soc:firmware: Attached to firmware from 2022-03-24T13:19:26, variant start
raspberrypi-firmware soc:firmware: Firmware hash is e5a963efa66a1974127860b42e913d2374139ff5
bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usb_phy_generic phy: supply vcc not found, using dummy regulator
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
FS-Cache: Loaded
CacheFiles: Loaded
simple-framebuffer 3ea32000.framebuffer: framebuffer at 0x3ea32000, 0x195000 bytes
simple-framebuffer 3ea32000.framebuffer: format=a8r8g8b8, mode=720x576x32, linelength=2880
Console: switching to colour frame buffer device 90x36
simple-framebuffer 3ea32000.framebuffer: fb0: simplefb registered!
NET: Registered PF_INET protocol family
IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
kvm [1]: IPA Size Limit: 44 bits
kvm [1]: vgic interrupt IRQ9
kvm [1]: Hyp mode initialized successfully
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=20 bucket_order=0
zbud: loaded
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
pci 0000:00:00.0: PME# supported from D0 D3hot
pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3cold
pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
iproc-rng200 fe104000.rng: hwrng registered
vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
cacheinfo: Unable to detect cache hierarchy for CPU 0
brd: module loaded
loop: module loaded
Loading iSCSI transport class v2.0-870.
bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
usbcore: registered new interface driver r8152
usbcore: registered new interface driver lan78xx
usbcore: registered new interface driver smsc95xx
pci 0000:00:00.0: enabling device (0000 -> 0002)
xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00003c0000000890
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.15.30-v8+ xhci-hcd
usb usb1: SerialNumber: 0000:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.15.30-v8+ xhci-hcd
usb usb2: SerialNumber: 0000:01:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
dwc_otg: FIQ enabled
dwc_otg: NAK holdoff enabled
dwc_otg: FIQ split-transaction FSM enabled
Module dwc_common_port init
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
usb 1-1: new high-speed USB device number 2 using xhci_hcd
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
Initializing XFRM netlink socket
NET: Registered PF_PACKET protocol family
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
usb 1-1.4: new full-speed USB device number 3 using xhci_hcd
printk: console [ttyS0] disabled
usb 1-1.4: New USB device found, idVendor=1a86, idProduct=e2e3, bcdDevice= 0.00
printk: console [ttyS0] enabled
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
usb 1-1.4: Product: USB2IIC_CTP_CONTROL
usb 1-1.4: Manufacturer: wch.cn
bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
input: wch.cn USB2IIC_CTP_CONTROL Touchscreen as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1A86:E2E3.0001/input/input0
mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
input: wch.cn USB2IIC_CTP_CONTROL as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1A86:E2E3.0001/input/input1
mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
hid-generic 0003:1A86:E2E3.0001: input,hiddev96,hidraw0: USB HID v1.00 Device [wch.cn USB2IIC_CTP_CONTROL] on usb-0000:01:00.0-1.4/input0
of_cfs_init
mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
of_cfs_init: OK
mmc1: new high speed SDIO card at address 0001
TAP version 14
mmc0: new ultra high speed DDR50 SDXC card at address aaaa
mmcblk0: mmc0:aaaa SN64G 59.5 GiB
1..7
mmcblk0: p1 p2
mmcblk0: mmc0:aaaa SN64G 59.5 GiB
# Subtest: kunit_executor_test
1..3
ok 1 - filter_subsuite_test
ok 2 - filter_subsuite_to_empty_test
ok 3 - filter_suites_test
# kunit_executor_test: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 - kunit_executor_test
# Subtest: kunit-try-catch-test
1..2
ok 1 - kunit_test_try_catch_successful_try_no_catch
ok 2 - kunit_test_try_catch_unsuccessful_try_does_catch
# kunit-try-catch-test: pass:2 fail:0 skip:0 total:2
# Totals: pass:2 fail:0 skip:0 total:2
ok 2 - kunit-try-catch-test
# Subtest: kunit-resource-test
1..7
ok 1 - kunit_resource_test_init_resources
ok 2 - kunit_resource_test_alloc_resource
ok 3 - kunit_resource_test_destroy_resource
ok 4 - kunit_resource_test_cleanup_resources
ok 5 - kunit_resource_test_proper_free_ordering
ok 6 - kunit_resource_test_static
ok 7 - kunit_resource_test_named
# kunit-resource-test: pass:7 fail:0 skip:0 total:7
# Totals: pass:7 fail:0 skip:0 total:7
ok 3 - kunit-resource-test
# Subtest: kunit-log-test
1..1
put this in log.
this too.
add to suite log.
along with this.
ok 1 - kunit_log_test
ok 4 - kunit-log-test
# Subtest: kunit_status
1..2
ok 1 - kunit_status_set_failure_test
ok 2 - kunit_status_mark_skipped_test
# kunit_status: pass:2 fail:0 skip:0 total:2
# Totals: pass:2 fail:0 skip:0 total:2
ok 5 - kunit_status
# Subtest: string-stream-test
1..3
ok 1 - string_stream_test_empty_on_creation
ok 2 - string_stream_test_not_empty_after_add
ok 3 - string_stream_test_get_string
# string-stream-test: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 6 - string-stream-test
# Subtest: example
1..3
# example_simple_test: initializing
ok 1 - example_simple_test
# example_skip_test: initializing
# example_skip_test: You should not see a line below.
ok 2 - example_skip_test # SKIP this test should be skipped
# example_mark_skipped_test: initializing
# example_mark_skipped_test: You should see a line below.
# example_mark_skipped_test: You should see this line.
ok 3 - example_mark_skipped_test # SKIP this test should be skipped
# example: pass:1 fail:0 skip:2 total:3
# Totals: pass:1 fail:0 skip:2 total:3
ok 7 - example
EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
EXT4-fs (mmcblk0p2): write access will be enabled during recovery
EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
devtmpfs: mounted
Freeing unused kernel memory: 4032K
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
systemd[1]: System time before build time, advancing clock.
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture arm64.
systemd[1]: Set hostname to .
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice system-getty.slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice system-modprobe.slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Paths.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Condition check resulted in Huge Pages File System being skipped.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Restore / save the current clock...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Starting File System Check on Root Device...
systemd[1]: Starting Journal Service...
fuse: init (API version 7.34)
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted RPC Pipe File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Restore / save the current clock.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: modprobe@configfs.service: Succeeded.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: modprobe@fuse.service: Succeeded.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Finished File System Check on Root Device.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Started File System Check Daemon to report status.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.
systemd-journald[168]: Received client request to flush runtime journal.
systemd-journald[168]: File /var/log/journal/4a2edff545964ee5a9ccdd2e5d0dd0ee/system.journal corrupted or uncleanly shut down, renaming and replacing.
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
mc: Linux media interface: v0.10
bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[vc_sm_connected_init]: start
[vc_sm_connected_init]: installed successfully
brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
videodev: Linux video capture interface: v2.00
snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_audio bcm2835_audio: card created with 8 channels
bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
bcm2835-codec bcm2835-codec: Device registered as /dev/video10
bcm2835-codec bcm2835-codec: Loaded V4L2 decode
bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
bcm2835-isp bcm2835-isp: Register output node 0 with media controller
bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
bcm2835-codec bcm2835-codec: Device registered as /dev/video11
bcm2835-codec bcm2835-codec: Loaded V4L2 encode
bcm2835-codec bcm2835-codec: Device registered as /dev/video12
bcm2835-codec bcm2835-codec: Loaded V4L2 isp
bcm2835-codec bcm2835-codec: Device registered as /dev/video18
bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
bcm2835-codec bcm2835-codec: Device registered as /dev/video31
bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
bcm2835-isp bcm2835-isp: Register output node 0 with media controller
bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
brcmfmac: F1 signature read @0x18000000=0x15264345
brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2
usbcore: registered new interface driver brcmfmac
brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
checking generic (3ea32000 195000) vs hw (0 ffffffffffffffff)
fb0: switching to vc4 from simple
Console: switching to colour dummy device 80x25
vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
Registered IR keymap rc-cec
rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input2
input: wch.cn USB2IIC_CTP_CONTROL as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1A86:E2E3.0001/input/input3
input: wch.cn USB2IIC_CTP_CONTROL UNKNOWN as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1A86:E2E3.0001/input/input4
hid-multitouch 0003:1A86:E2E3.0001: input,hiddev96,hidraw0: USB HID v1.00 Device [wch.cn USB2IIC_CTP_CONTROL] on usb-0000:01:00.0-1.4/input0
vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
Registered IR keymap rc-cec
rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input5
vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
Registered IR keymap rc-cec
rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input6
vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
Console: switching to colour frame buffer device 90x36
vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
8021q: 802.1Q VLAN Support v1.8
Adding 102396k swap on /var/swap. Priority:-2 extents:3 across:126976k SSFS
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
bcmgenet fd580000.ethernet eth0: Link is Down
cam-dummy-reg: disabling
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Broadcom registered
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NET: Registered PF_ALG protocol family
ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead