dmesg - odroidm1
Booting Linux on physical CPU 0x0000000000 [0x412fd050]
Linux version 4.19.219-odroid-arm64 ([email protected]) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-6ubuntu2), GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP Fri, 27 May 2022 03:16:46 +0000
Machine model: Hardkernel ODROID-M1
earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
bootconsole [uart8250] enabled
OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
cma: Reserved 16 MiB at 0x00000000e8c00000
On node 0 totalpages: 1968202
DMA32 zone: 14938 pages used for memmap
DMA32 zone: 0 pages reserved
DMA32 zone: 955974 pages, LIFO batch:63
Normal zone: 16382 pages used for memmap
Normal zone: 1012228 pages, LIFO batch:63
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: Trusted OS migration not required
psci: SMC Calling Convention v1.2
percpu: Embedded 24 pages/cpu s58344 r8192 d31768 u98304
pcpu-alloc: s58344 r8192 d31768 u98304 alloc=24*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Detected VIPT I-cache on CPU0
CPU features: detected: Virtualization Host Extensions
CPU features: detected: Speculative Store Bypassing Safe (SSBS)
Built 1 zonelists, mobility grouping on. Total pages: 1936882
Kernel command line: root=/dev/mmcblk0p2 quiet splash plymouth.ignore-serial-consoles earlycon=uart8250,mmio32,0xfe660000 pci=nomsi fsck.mode=force fsck.repair=yes mtdparts=sfc_nor:0x20000@0xe0000(env),0x200000@0x100000(uboot),0x100000@0x300000(splash),0xc00000@0x400000(firmware) console=tty1
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: mapped [mem 0xe4c00000-0xe8c00000] (64MB)
Memory: 7613232K/7872808K available (10110K kernel code, 1350K rwdata, 3616K rodata, 1280K init, 479K bss, 243192K reserved, 16384K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 38725 entries in 152 pages
rcu: Hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: Distributor has no Range Selector support
GICv3: no VLPI support, no direct LPI support
ITS [mem 0xfd440000-0xfd45ffff]
ITS@0x00000000fd440000: allocated 8192 Devices @ee2a0000 (indirect, esz 8, psz 64K, shr 0)
ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @ee2b0000 (flat, esz 2, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
GIC: using LPI property table @0x000000000a520000
GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
CPU0: Booted with LPIs enabled, memory probably corrupted
CPU0: Failed to disable LPIs
random: random: get_random_bytes called from start_kernel+0x368/0x500 with crng_init=0
arch_timer: cp15 timer(s) running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Console: colour dummy device 80x25
console [tty1] enabled
bootconsole [uart8250] disabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
ASID allocator initialised with 32768 entries
rcu: Hierarchical SRCU implementation.
Platform MSI: interrupt-controller@fd440000 domain created
PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
CPU1: Booted with LPIs enabled, memory probably corrupted
CPU1: Failed to disable LPIs
CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
Detected VIPT I-cache on CPU2
GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
CPU2: Booted with LPIs enabled, memory probably corrupted
CPU2: Failed to disable LPIs
CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
Detected VIPT I-cache on CPU3
GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
CPU3: Booted with LPIs enabled, memory probably corrupted
CPU3: Failed to disable LPIs
CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected: GIC system register CPU interface
CPU features: detected: Privileged Access Never
CPU features: detected: LSE atomic instructions
CPU features: detected: User Access Override
CPU features: detected: 32-bit EL0 Support
CPU features: detected: RAS Extension Support
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
Registered cp15_barrier emulation handler
Registered setend emulation handler
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.046:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
Registered FIQ tty driver
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
DMA: preallocated 256 KiB pool for atomic allocations
rockchip-gpio fdd60000.gpio: probed gpio0 (fdd60000.gpio)
rockchip-gpio fe740000.gpio: probed gpio1 (fe740000.gpio)
rockchip-gpio fe750000.gpio: probed gpio2 (fe750000.gpio)
rockchip-gpio fe760000.gpio: probed gpio3 (fe760000.gpio)
rockchip-gpio fe770000.gpio: probed gpio4 (fe770000.gpio)
rockchip-pinctrl pinctrl: probed pinctrl
fbcon: Taking over console
console [ttyFIQ0] enabled
Registered fiq debugger ttyFIQ0
dc_12v: 12000 mV
reg-fixed-voltage dc-12v: dc_12v supplying 12000000uV
reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree
vcc3v3_sys: supplied by dc_12v
dc_12v: could not add device link regulator.2 err -2
vcc3v3_sys: 3300 mV
reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
reg-fixed-voltage vcc5v0-sys: Looking up vin-supply from device tree
vcc5v0_sys: supplied by dc_12v
dc_12v: could not add device link regulator.3 err -2
vcc5v0_sys: 5000 mV
reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
reg-fixed-voltage vcc5v0-usb: Looking up vin-supply from device tree
vcc5v0_usb: supplied by dc_12v
dc_12v: could not add device link regulator.4 err -2
vcc5v0_usb: 5000 mV
reg-fixed-voltage vcc5v0-usb: vcc5v0_usb supplying 5000000uV
reg-fixed-voltage vcc5v0-host-regulator: Looking up vin-supply from device tree
vcc5v0_host: supplied by vcc5v0_usb
vcc5v0_usb: could not add device link regulator.5 err -2
vcc5v0_host: 5000 mV
reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 5000000uV
vcc5v0_otg: 5000 mV
reg-fixed-voltage vcc5v0-otg-regulator: Looking up vin-supply from device tree
vcc5v0_otg: supplied by vcc5v0_usb
reg-fixed-voltage vcc5v0-otg-regulator: vcc5v0_otg supplying 5000000uV
reg-fixed-voltage pcie30-avdd0v9: Looking up vin-supply from device tree
pcie30_avdd0v9: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.7 err -2
pcie30_avdd0v9: 900 mV
reg-fixed-voltage pcie30-avdd0v9: pcie30_avdd0v9 supplying 900000uV
reg-fixed-voltage pcie30-avdd1v8: Looking up vin-supply from device tree
pcie30_avdd1v8: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.8 err -2
pcie30_avdd1v8: 1800 mV
reg-fixed-voltage pcie30-avdd1v8: pcie30_avdd1v8 supplying 1800000uV
vcc3v3_pcie: 3300 mV
reg-fixed-voltage gpio-regulator: Looking up vin-supply from device tree
vcc3v3_pcie: supplied by dc_12v
reg-fixed-voltage gpio-regulator: vcc3v3_pcie supplying 3300000uV
rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_vpu-supply from device tree
rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_vpu-supply property in node /power-management@fdd90000/power-controller failed
rk_iommu fdea0800.iommu: version = 2
rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rga-supply from device tree
rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rga-supply property in node /power-management@fdd90000/power-controller failed
rk_iommu fded0480.iommu: version = 2
rk_iommu fdee0800.iommu: version = 2
rk_iommu fdef0800.iommu: version = 2
rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rkvenc-supply from device tree
rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rkvenc-supply property in node /power-management@fdd90000/power-controller failed
rk_iommu fdf40f00.iommu: version = 2
rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rkvdec-supply from device tree
rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rkvdec-supply property in node /power-management@fdd90000/power-controller failed
rk_iommu fdf80800.iommu: version = 2
rk_iommu fe043e00.iommu: version = 2
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
Advanced Linux Sound Architecture Driver Initialized.
rockchip-cpuinfo cpuinfo: SoC : 35682000
rockchip-cpuinfo cpuinfo: Serial : 55f426dbcda3a453
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NET: Registered protocol family 2
IP idents hash table entries: 131072 (order: 8, 1048576 bytes)
tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 6, 393216 bytes)
UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 15304K
hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
Initialise system trusted keyrings
workingset: timestamp_bits=45 max_order=21 bucket_order=0
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
phy phy-fe8a0000.usb2-phy.0: Looking up phy-supply from device tree
vcc5v0_host: could not add device link phy-fe8a0000.usb2-phy.0 err -2
phy phy-fe8a0000.usb2-phy.0: Linked as a consumer to regulator.5
phy phy-fe8a0000.usb2-phy.1: Looking up phy-supply from device tree
phy phy-fe8a0000.usb2-phy.1: Looking up phy-supply property in node /usb2-phy@fe8a0000/otg-port failed
phy phy-fe8a0000.usb2-phy.1: Looking up vbus-supply from device tree
phy phy-fe8a0000.usb2-phy.1: Linked as a consumer to regulator.6
extcon extcon1: failed to create extcon usb2-phy link
phy phy-fe8b0000.usb2-phy.2: Looking up phy-supply from device tree
vcc5v0_host: could not add device link phy-fe8b0000.usb2-phy.2 err -2
phy phy-fe8b0000.usb2-phy.2: Linked as a consumer to regulator.5
phy phy-fe8b0000.usb2-phy.3: Looking up phy-supply from device tree
vcc5v0_host: could not add device link phy-fe8b0000.usb2-phy.3 err -2
phy phy-fe8b0000.usb2-phy.3: Linked as a consumer to regulator.5
phy phy-fe8b0000.usb2-phy.3: Looking up vbus-supply from device tree
phy phy-fe8b0000.usb2-phy.3: Looking up vbus-supply property in node /usb2-phy@fe8b0000/otg-port failed
phy phy-fe8b0000.usb2-phy.3: No vbus specified for otg port
phy phy-fe850000.video-phy.4: Looking up phy-supply from device tree
phy phy-fe850000.video-phy.4: Looking up phy-supply property in node /video-phy@fe850000 failed
phy phy-fe820000.phy.5: Looking up phy-supply from device tree
phy phy-fe820000.phy.5: Looking up phy-supply property in node /phy@fe820000 failed
phy phy-fe830000.phy.6: Looking up phy-supply from device tree
phy phy-fe830000.phy.6: Looking up phy-supply property in node /phy@fe830000 failed
phy phy-fe840000.phy.7: Looking up phy-supply from device tree
phy phy-fe840000.phy.7: Looking up phy-supply property in node /phy@fe840000 failed
phy phy-fe8c0000.phy.8: Looking up phy-supply from device tree
phy phy-fe8c0000.phy.8: Looking up phy-supply property in node /phy@fe8c0000 failed
rk-pcie 3c0800000.pcie: Looking up vpcie3v3-supply from device tree
rk-pcie 3c0800000.pcie: Linked as a consumer to regulator.9
pwm-backlight backlight: Looking up power-supply from device tree
pwm-backlight backlight: Looking up power-supply property in node /backlight failed
pwm-backlight backlight: backlight supply power not found, using dummy regulator
pwm-backlight backlight: Linked as a consumer to regulator.0
pwm-backlight backlight1: Looking up power-supply from device tree
pwm-backlight backlight1: Looking up power-supply property in node /backlight1 failed
pwm-backlight backlight1: backlight1 supply power not found, using dummy regulator
pwm-backlight backlight1: Linked as a consumer to regulator.0
mpp_service mpp-srv:
mpp_service mpp-srv: probe start
iommu: Adding device fdf40000.rkvenc to group 4
mpp_rkvenc fdf40000.rkvenc: Linked as a consumer to fdf40f00.iommu
mpp_rkvenc fdf40000.rkvenc: probing start
mpp_rkvenc fdf40000.rkvenc: Looking up venc-supply from device tree
mpp_rkvenc fdf40000.rkvenc: venc regulator not ready, retry
rkvenc_init:1199: failed to add venc devfreq
mpp_rkvenc fdf40000.rkvenc: probing finish
iommu: Adding device fdea0400.vdpu to group 0
mpp_vdpu2 fdea0400.vdpu: Linked as a consumer to fdea0800.iommu
mpp_vdpu2 fdea0400.vdpu: probe device
rk-pcie 3c0800000.pcie: missing legacy IRQ resource
rk-pcie 3c0800000.pcie: Missing *config* reg space
rk-pcie 3c0800000.pcie: host bridge /pcie@fe280000 ranges:
rk-pcie 3c0800000.pcie: Parsing ranges property...
rk-pcie 3c0800000.pcie: err 0x380000000..0x3807fffff -> 0x80000000
rk-pcie 3c0800000.pcie: IO 0x380800000..0x3808fffff -> 0x80800000
rk-pcie 3c0800000.pcie: MEM 0x380900000..0x3bfffffff -> 0x80900000
mpp_vdpu2 fdea0400.vdpu: probing finish
iommu: Adding device fdee0000.vepu to group 2
mpp_vepu2 fdee0000.vepu: Linked as a consumer to fdee0800.iommu
mpp_vepu2 fdee0000.vepu: probe device
mpp_vepu2 fdee0000.vepu: probing finish
iommu: Adding device fdef0000.iep to group 3
mpp-iep2 fdef0000.iep: Linked as a consumer to fdef0800.iommu
mpp-iep2 fdef0000.iep: probe device
mpp-iep2 fdef0000.iep: allocate roi buffer failed
mpp-iep2 fdef0000.iep: probing finish
iommu: Adding device fded0000.jpegd to group 1
mpp_jpgdec fded0000.jpegd: Linked as a consumer to fded0480.iommu
mpp_jpgdec fded0000.jpegd: probe device
mpp_jpgdec fded0000.jpegd: probing finish
iommu: Adding device fdf80200.rkvdec to group 5
mpp_rkvdec2 fdf80200.rkvdec: Linked as a consumer to fdf80800.iommu
mpp_rkvdec2 fdf80200.rkvdec: probing start
mpp_rkvdec2 fdf80200.rkvdec: 16 task capacity link mode detected
mpp_rkvdec2 fdf80200.rkvdec: shared_niu_a is not found!
rkvdec2_init:661: No niu aclk reset resource define
mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found!
rkvdec2_init:664: No niu hclk reset resource define
mpp_rkvdec2 fdf80200.rkvdec: sram_start 0x00000000fdcc0000
mpp_rkvdec2 fdf80200.rkvdec: rcb_iova 0x0000000010000000
mpp_rkvdec2 fdf80200.rkvdec: sram_size 45056
mpp_rkvdec2 fdf80200.rkvdec: rcb_size 65536
mpp_rkvdec2 fdf80200.rkvdec: min_width 512
mpp_rkvdec2 fdf80200.rkvdec: link mode probe finish
mpp_rkvdec2 fdf80200.rkvdec: probing finish
mpp_service mpp-srv: probe success
dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330
dma-pl330 fe530000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
dma-pl330 fe550000.dmac: Loaded driver for PL330 DMAC-241330
dma-pl330 fe550000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
rockchip-system-monitor rockchip-system-monitor: system monitor probe
random: fast init done
gpiomem-rk3568 fd660000.rk3568-gpiomem: Initialised: Registers at 0xfd660000
random: crng init done
iommu: Adding device fe040000.vop to group 6
rockchip-vop2 fe040000.vop: Linked as a consumer to fe043e00.iommu
rockchip-drm display-subsystem: Linked as a consumer to fe040000.vop
rockchip-drm display-subsystem: Linked as a consumer to fe0a0000.hdmi
rockchip-drm display-subsystem: defer getting devfreq
rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x3f, primary plane phy id: 4
rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp1 assign plane mask: 0x0, primary plane phy id: -1
rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x0, primary plane phy id: -1
[drm] unsupported AFBC format[3432564e]
[drm] failed to init overlay plane Cluster0-win1
[drm] failed to init overlay plane Cluster1-win1
rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffff8008b07e08)
dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffffff8008b0b8b0)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
get_framebuffer_by_node: failed to get logo,offset
rockchip-drm display-subsystem: can't not find any loader display
rockchip-drm display-subsystem: failed to show loader logo
[drm] Cannot find any crtc or sizes
[drm] Cannot find any crtc or sizes
[drm] Initialized rockchip 2.0.0 20140818 for display-subsystem on minor 0
rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_gpu-supply from device tree
rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_gpu-supply property in node /power-management@fdd90000/power-controller failed
mali fde60000.gpu: Kernel DDK version g7p1-01bet0
mali fde60000.gpu: Looking up mali-supply from device tree
cacheinfo: Unable to detect cache hierarchy for CPU 0
mali fde60000.gpu: Device initialization Deferred
lkdtm: No crash points registered, enable through debugfs
spi_master spi0: cannot find modalias for /spi@fe610000/pcfg-pull-none-smt
spi_master spi0: Failed to create SPI device for /spi@fe610000/pcfg-pull-none-smt
spi_master spi0: cannot find modalias for /spi@fe610000/pcfg-pull-up-drv-level-2
spi_master spi0: Failed to create SPI device for /spi@fe610000/pcfg-pull-up-drv-level-2
spi_master spi0: cannot find modalias for /spi@fe610000/pcfg-pull-up-drv-level-1
spi_master spi0: Failed to create SPI device for /spi@fe610000/pcfg-pull-up-drv-level-1
spi_master spi0: cannot find modalias for /spi@fe610000/pcfg-pull-none-drv-level-3
spi_master spi0: Failed to create SPI device for /spi@fe610000/pcfg-pull-none-drv-level-3
spi_master spi0: cannot find modalias for /spi@fe610000/pcfg-pull-none-drv-level-2
spi_master spi0: Failed to create SPI device for /spi@fe610000/pcfg-pull-none-drv-level-2
spi_master spi0: cannot find modalias for /spi@fe610000/pcfg-pull-none-drv-level-1
spi_master spi0: Failed to create SPI device for /spi@fe610000/pcfg-pull-none-drv-level-1
spi_master spi0: cannot find modalias for /spi@fe610000/pcfg-pull-none
spi_master spi0: Failed to create SPI device for /spi@fe610000/pcfg-pull-none
spi_master spi0: cannot find modalias for /spi@fe610000/pcfg-pull-up
spi_master spi0: Failed to create SPI device for /spi@fe610000/pcfg-pull-up
libphy: Fixed MDIO Bus: probed
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver cdc_ncm
dwc3 fcc00000.dwc3: Failed to get clk 'ref': -2
dwc3 fcc00000.dwc3: Configuration mismatch. dr_mode forced to host
dwc3 fd000000.dwc3: Failed to get clk 'ref': -2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform fd800000.usb: EHCI Host Controller
ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1
ehci-platform fd800000.usb: irq 12, io mem 0xfd800000
ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.19.219-odroid-arm64 ehci_hcd
usb usb1: SerialNumber: fd800000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-platform fd880000.usb: EHCI Host Controller
ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2
ehci-platform fd880000.usb: irq 14, io mem 0xfd880000
ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.19.219-odroid-arm64 ehci_hcd
usb usb2: SerialNumber: fd880000.usb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
ohci-platform fd840000.usb: Generic Platform OHCI controller
ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
ohci-platform fd840000.usb: irq 13, io mem 0xfd840000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: Generic Platform OHCI controller
usb usb3: Manufacturer: Linux 4.19.219-odroid-arm64 ohci_hcd
usb usb3: SerialNumber: fd840000.usb
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci-platform fd8c0000.usb: Generic Platform OHCI controller
ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4
ohci-platform fd8c0000.usb: irq 15, io mem 0xfd8c0000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: Generic Platform OHCI controller
usb usb4: Manufacturer: Linux 4.19.219-odroid-arm64 ohci_hcd
usb usb4: SerialNumber: fd8c0000.usb
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 5
xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000011002010010
xhci-hcd xhci-hcd.4.auto: irq 70, io mem 0xfcc00000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.19.219-odroid-arm64 xhci-hcd
usb usb5: SerialNumber: xhci-hcd.4.auto
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 6
xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.19.219-odroid-arm64 xhci-hcd
usb usb6: SerialNumber: xhci-hcd.4.auto
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 7
xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000011002010010
xhci-hcd xhci-hcd.5.auto: irq 71, io mem 0xfd000000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 4.19.219-odroid-arm64 xhci-hcd
usb usb7: SerialNumber: xhci-hcd.5.auto
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 8
xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.19.219-odroid-arm64 xhci-hcd
usb usb8: SerialNumber: xhci-hcd.5.auto
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
.. rk pwm remotectl v2.0 init
input: fdd70030.pwm as /devices/platform/fdd70030.pwm/input/input0
remotectl-pwm fdd70030.pwm: pwm version is 0x2130000
remotectl-pwm fdd70030.pwm: Controller support pwrkey capture
i2c /dev entries driver
fan53555-regulator 3-001c: FAN53555 Option[12] Rev[15] Detected!
vdd_cpu: override max_uV, 1390000 -> 1387500
fan53555-regulator 3-001c: Looking up vin-supply from device tree
vdd_cpu: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.10 err -2
vdd_cpu: 712 1387 mV at 1025 mV
rk808 3-0020: chip id: 0x8090
rk808 3-0020: No cache defaults, reading back from HW
rk808 3-0020: source: on=0x40, off=0x00
rk808 3-0020: support dcdc3 fb mode:-22, 63
rk808 3-0020: support pmic reset mode:0,0
rk808-regulator rk808-regulator: there is no dvs0 gpio
rk808-regulator rk808-regulator: there is no dvs1 gpio
rk808 3-0020: Looking up vcc1-supply from device tree
vdd_logic: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.11 err -2
vdd_logic: 500 1350 mV at 900 mV
rk808 3-0020: Looking up vcc2-supply from device tree
vdd_gpu: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.12 err -2
vdd_gpu: 500 1350 mV at 900 mV
rk808 3-0020: Looking up vcc3-supply from device tree
vcc_ddr: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.13 err -2
vcc_ddr: at 500 mV
rk808 3-0020: Looking up vcc4-supply from device tree
vdd_npu: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.14 err -2
vdd_npu: 500 1350 mV at 900 mV
rk808 3-0020: Looking up vcc9-supply from device tree
vcc_1v8: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.15 err -2
vcc_1v8: 1800 mV
rk808 3-0020: Looking up vcc5-supply from device tree
vdda0v9_image: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.16 err -2
vdda0v9_image: 900 mV
rk808 3-0020: Looking up vcc5-supply from device tree
vdda_0v9: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.17 err -2
vdda_0v9: 900 mV
rk808 3-0020: Looking up vcc5-supply from device tree
vdda0v9_pmu: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.18 err -2
vdda0v9_pmu: 900 mV
rk808 3-0020: Looking up vcc6-supply from device tree
vccio_acodec: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.19 err -2
vccio_acodec: 3300 mV
rk808 3-0020: Looking up vcc6-supply from device tree
vccio_sd: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.20 err -2
vccio_sd: 1800 3300 mV at 3300 mV
rk808 3-0020: Looking up vcc6-supply from device tree
vcc3v3_pmu: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.21 err -2
vcc3v3_pmu: 3300 mV
rk808 3-0020: Looking up vcc7-supply from device tree
vcca_1v8: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.22 err -2
vcca_1v8: 1800 mV
rk808 3-0020: Looking up vcc7-supply from device tree
vcca1v8_pmu: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.23 err -2
vcca1v8_pmu: 1800 mV
rk808 3-0020: Looking up vcc7-supply from device tree
vcca1v8_image: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.24 err -2
vcca1v8_image: 1800 mV
rk808 3-0020: Looking up vcc9-supply from device tree
vcc_3v3: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.25 err -2
vcc_3v3: at 3300 mV
rk808 3-0020: Looking up vcc8-supply from device tree
vcc3v3_sd: supplied by vcc3v3_sys
vcc3v3_sys: could not add device link regulator.26 err -2
vcc3v3_sd: at 3300 mV
rk817-battery rk817-battery: Failed to find matching dt id
rk817-charger rk817-charger: Failed to find matching dt id
input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-3/3-0020/rk805-pwrkey/input/input1
rk808-rtc rk808-rtc: registered as rtc0
rk808-rtc rk808-rtc: setting system clock to 2017-08-04 09:00:21 UTC (1501837221)
rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio1-supply from device tree
rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio1-supply property in node /syscon@fdc20000/io-domains failed
rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio2-supply from device tree
rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.21
rockchip-iodomain fdc20000.syscon:io-domains: pmuio2(3300000 uV) supplied by vcc3v3_pmu
rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio1-supply from device tree
rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.19
rockchip-iodomain fdc20000.syscon:io-domains: vccio1(3300000 uV) supplied by vccio_acodec
rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply from device tree
rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply property in node /syscon@fdc20000/io-domains failed
rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio3-supply from device tree
rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.20
rockchip-iodomain fdc20000.syscon:io-domains: vccio3(3300000 uV) supplied by vccio_sd
rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio4-supply from device tree
rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.15
rockchip-iodomain fdc20000.syscon:io-domains: vccio4(1800000 uV) supplied by vcc_1v8
rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio5-supply from device tree
rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.25
rockchip-iodomain fdc20000.syscon:io-domains: vccio5(3300000 uV) supplied by vcc_3v3
rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio6-supply from device tree
rockchip-iodomain fdc20000.syscon:io-domains: vccio6(3300000 uV) supplied by vcc_3v3
rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio7-supply from device tree
rockchip-iodomain fdc20000.syscon:io-domains: vccio7(3300000 uV) supplied by vcc_3v3
rockchip-thermal fe710000.tsadc: tsadc is probed successfully!
cpu cpu0: leakage=38
cpu cpu0: pvtm = 85390, from nvmem
cpu cpu0: pvtm-volt-sel=1
cpu cpu0: Looking up cpu-supply from device tree
cpu cpu0: Linked as a consumer to regulator.10
cpu cpu0: Dropping the link to regulator.10
cpu cpu0: Looking up cpu-supply from device tree
cpu cpu0: Linked as a consumer to regulator.10
cpu cpu0: avs=0
cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
cpu cpu0: failed to find power_model node
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
dwmmc_rockchip fe2b0000.dwmmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip fe2b0000.dwmmc: Using internal DMA controller.
dwmmc_rockchip fe2b0000.dwmmc: Version ID is 270a
dwmmc_rockchip fe2b0000.dwmmc: DW MMC controller at irq 46,32 bit host data width,256 deep fifo
dwmmc_rockchip fe2b0000.dwmmc: Looking up vmmc-supply from device tree
dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.26
dwmmc_rockchip fe2b0000.dwmmc: Looking up vqmmc-supply from device tree
dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.20
mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-dwcmshc fe310000.sdhci: Looking up vmmc-supply from device tree
sdhci-dwcmshc fe310000.sdhci: Looking up vmmc-supply property in node /sdhci@fe310000 failed
sdhci-dwcmshc fe310000.sdhci: Looking up vqmmc-supply from device tree
sdhci-dwcmshc fe310000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe310000 failed
mmc0: Unknown controller version (5). You may experience problems.
mmc0: SDHCI controller on fe310000.sdhci [fe310000.sdhci] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
rockchip,bus bus-npu: Looking up bus-supply from device tree
rockchip,bus bus-npu: Linked as a consumer to regulator.11
rockchip,bus bus-npu: Failed to get leakage
rockchip,bus bus-npu: pvtm = 85390, from nvmem
rockchip,bus bus-npu: pvtm-volt-sel=1
rockchip,bus bus-npu: avs=0
rockchip-saradc fe720000.saradc: Looking up vref-supply from device tree
rockchip-saradc fe720000.saradc: Linked as a consumer to regulator.22
rksfc_base v1.1 2016-01-08
rksfc fe300000.sfc: rksfc_probe clk rate = 99000000
rkflash_dev_init enter
sfc nor id: c2 25 38
rkflash[1] init success
4 cmdlinepart partitions found on MTD device sfc_nor
Creating 4 MTD partitions on "sfc_nor":
0x0000000e0000-0x000000100000 : "env"
0x000000100000-0x000000300000 : "uboot"
0x000000300000-0x000000400000 : "splash"
0x000000400000-0x000001000000 : "firmware"
sfc_nor_mtd_init register mtd succuss
rkflash_dev_init device register as mtd dev, ret= 0
rk817-codec rk817-codec: DMA mask not set
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
rga2: Driver loaded successfully ver:3.2.63318
rga2: Module initialized.
mali fde60000.gpu: Kernel DDK version g7p1-01bet0
mali fde60000.gpu: Looking up mali-supply from device tree
mali fde60000.gpu: Linked as a consumer to regulator.12
mali fde60000.gpu: Looking up shadercores-supply from device tree
mali fde60000.gpu: Looking up shadercores-supply property in node /gpu@fde60000 failed
mali fde60000.gpu: Looking up mali-supply from device tree
vdd_gpu: could not add device link fde60000.gpu err -17
vdd_gpu: Failed to create debugfs directory
mali fde60000.gpu: Looking up shadercores-supply from device tree
mali fde60000.gpu: Looking up shadercores-supply property in node /gpu@fde60000 failed
mali fde60000.gpu: dev_pm_opp_set_regulators: no regulator (shadercores) found: -19
mali fde60000.gpu: leakage=10
mali fde60000.gpu: pvtm = 85390, from nvmem
asoc-simple-card hdmi-sound: i2s-hifi fe400000.i2s mapping ok
mali fde60000.gpu: avs=0
W : [File] : /opt/source/drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 112; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
mali fde60000.gpu: GPU identified as 0x2 arch 7.4.0 r1p0 status 0
mali fde60000.gpu: No priority control manager is configured
mali fde60000.gpu: No memory group manager is configured
mali fde60000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
asoc-simple-card rk809-sound: ASoC: DAPM unknown pin Headphones
mali fde60000.gpu: Probed as mali0
asoc-simple-card rk809-sound: rk817-hifi fe410000.i2s mapping ok
input: ODROID-M1-FRONT Headphones as /devices/platform/rk809-sound/sound/card1/input2
rk_gmac-dwmac fe2a0000.ethernet: Looking up phy-supply from device tree
rk_gmac-dwmac fe2a0000.ethernet: Looking up phy-supply property in node /ethernet@fe2a0000 failed
rk_gmac-dwmac fe2a0000.ethernet: no regulator found
rk_gmac-dwmac fe2a0000.ethernet: clock input or output? (output).
rk_gmac-dwmac fe2a0000.ethernet: TX delay(0x4f).
rk_gmac-dwmac fe2a0000.ethernet: RX delay(0x2d).
rk_gmac-dwmac fe2a0000.ethernet: integrated PHY? (no).
rk_gmac-dwmac fe2a0000.ethernet: init for RGMII
rk_gmac-dwmac fe2a0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
rk_gmac-dwmac fe2a0000.ethernet: DWMAC4/5
rk_gmac-dwmac fe2a0000.ethernet: DMA HW capability register supported
rk_gmac-dwmac fe2a0000.ethernet: RX Checksum Offload Engine supported
rk_gmac-dwmac fe2a0000.ethernet: TX Checksum insertion supported
rk_gmac-dwmac fe2a0000.ethernet: Wake-Up On Lan supported
rk_gmac-dwmac fe2a0000.ethernet: TSO supported
rk_gmac-dwmac fe2a0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
rk_gmac-dwmac fe2a0000.ethernet: rk_get_eth_addr: mac address: 00:1e:06:51:05:27
rk_gmac-dwmac fe2a0000.ethernet: device MAC address 00:1e:06:51:05:27
rk_gmac-dwmac fe2a0000.ethernet: TSO feature enabled
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 BJTD4R 29.1 GiB
mmcblk0boot0: mmc0:0001 BJTD4R partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 BJTD4R partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 BJTD4R partition 3 4.00 MiB, chardev (240:0)
mmcblk0: p1 p2
usb 5-1: new high-speed USB device number 2 using xhci-hcd
devfreq fde60000.gpu: Couldn't update frequency transition information.
rockchip-vop2 fe040000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11 for vp0
libphy: stmmac: probed
asoc-simple-card rk809-sound: ASoC: DAPM unknown pin Headphones
rockchip-pm rockchip-suspend: not set pwm-regulator-config
I : [File] : /opt/source/drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '03:16:46', on 'May 27 2022'.
Mali:
Mali device driver loaded
Console: switching to colour frame buffer device 240x67
rockchip-drm display-subsystem: fb0: frame buffer device
usb 5-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB2.0 Hub
usb 5-1: Manufacturer: GenesysLogic
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
usb 6-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice=92.24
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB3.0 Hub
usb 6-1: Manufacturer: GenesysLogic
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 4 ports detected
ALSA device list:
#0: ODROID-M1-HDMI
#1: ODROID-M1-FRONT
Freeing unused kernel memory: 1280K
Run /init as init process
rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
usb 5-1.1: new low-speed USB device number 3 using xhci-hcd
libata version 3.00 loaded.
ahci fc800000.sata: Looking up target-supply from device tree
ahci fc800000.sata: Looking up target-supply property in node /sata@fc800000 failed
ahci fc800000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
ahci fc800000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
ahci fc800000.sata: port 0 is not capable of FBS
scsi host0: ahci
ata1: SATA max UDMA/133 mmio [mem 0xfc800000-0xfc800fff] port 0x100 irq 11
usb 5-1.1: New USB device found, idVendor=046d, idProduct=c069, bcdDevice=56.01
usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.1: Product: USB Laser Mouse
usb 5-1.1: Manufacturer: Logitech
ata1: SATA link down (SStatus 0 SControl 300)
usb 5-1.2: new full-speed USB device number 4 using xhci-hcd
usb 5-1.2: New USB device found, idVendor=046d, idProduct=c32b, bcdDevice=92.04
usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1.2: Product: Gaming Keyboard G910
usb 5-1.2: Manufacturer: Logitech
usb 5-1.2: SerialNumber: 0F8B34563232
rk-pcie 3c0800000.pcie: PCIe Link up, LTSSM is 0x230011
rk-pcie 3c0800000.pcie: PCI host bridge to bus 0002:20
pci_bus 0002:20: root bus resource [bus 20-2f]
pci_bus 0002:20: root bus resource [??? 0x380000000-0x3807fffff flags 0x0] (bus address [0x80000000-0x807fffff])
pci_bus 0002:20: root bus resource [io 0x0000-0xfffff] (bus address [0x80800000-0x808fffff])
pci_bus 0002:20: root bus resource [mem 0x380900000-0x3bfffffff] (bus address [0x80900000-0xbfffffff])
pci_bus 0002:20: scanning bus
pci 0002:20:00.0: [1d87:3566] type 01 class 0x060400
pci 0002:20:00.0: reg 0x10: [mem 0x00000000-0x3fffffff 64bit]
pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
pci 0002:20:00.0: supports D1 D2
pci 0002:20:00.0: PME# supported from D0 D1 D3hot
pci 0002:20:00.0: PME# disabled
PCI: OF: /pcie@fe280000: msi-map, using mask ffffffff, rid-base: 00002000, out-base: 00002000, length: 00001000, rid: 00002000 -> 00002000
pci_bus 0002:20: fixups for bus
pci 0002:20:00.0: scanning [bus 01-ff] behind bridge, pass 0
pci 0002:20:00.0: Primary bus is hard wired to 0
pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
pci 0002:20:00.0: scanning [bus 00-00] behind bridge, pass 1
pci_bus 0002:21: scanning bus
pci 0002:21:00.0: [144d:a808] type 00 class 0x010802
pci 0002:21:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
pci 0002:21:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8 GT/s x2 link at 0002:20:00.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
PCI: OF: /pcie@fe280000: msi-map, using mask ffffffff, rid-base: 00002000, out-base: 00002000, length: 00001000, rid: 00002100 -> 00002100
pci_bus 0002:21: fixups for bus
pci_bus 0002:21: bus scan returning with max=21
pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
pci_bus 0002:20: bus scan returning with max=21
pci 0002:20:00.0: BAR 0: no space for [mem size 0x40000000 64bit]
pci 0002:20:00.0: BAR 0: failed to assign [mem size 0x40000000 64bit]
pci 0002:20:00.0: BAR 8: assigned [mem 0x380900000-0x3809fffff]
pci 0002:20:00.0: BAR 6: assigned [mem 0x380a00000-0x380a0ffff pref]
pci 0002:21:00.0: BAR 0: assigned [mem 0x380900000-0x380903fff 64bit]
pci 0002:20:00.0: PCI bridge to [bus 21]
pci 0002:20:00.0: bridge window [mem 0x380900000-0x3809fffff]
pcieport 0002:20:00.0: assign IRQ: got 99
pcieport 0002:20:00.0: Signaling PME with IRQ 99
nvme 0002:21:00.0: assign IRQ: got 99
nvme nvme0: pci function 0002:21:00.0
nvme 0002:21:00.0: enabling device (0000 -> 0002)
nvme 0002:21:00.0: enabling bus mastering
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 8 seconds
nvme0n1: p1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Laser Mouse as /devices/platform/usbdrd/fcc00000.dwc3/xhci-hcd.4.auto/usb5/5-1/5-1.1/5-1.1:1.0/0003:046D:C069.0001/input/input3
hid-generic 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-xhci-hcd.4.auto-1.1/input0
input: Logitech Gaming Keyboard G910 as /devices/platform/usbdrd/fcc00000.dwc3/xhci-hcd.4.auto/usb5/5-1/5-1.2/5-1.2:1.0/0003:046D:C32B.0002/input/input4
hid-generic 0003:046D:C32B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G910] on usb-xhci-hcd.4.auto-1.2/input0
input: Logitech Gaming Keyboard G910 Keyboard as /devices/platform/usbdrd/fcc00000.dwc3/xhci-hcd.4.auto/usb5/5-1/5-1.2/5-1.2:1.1/0003:046D:C32B.0003/input/input5
input: Logitech Gaming Keyboard G910 Consumer Control as /devices/platform/usbdrd/fcc00000.dwc3/xhci-hcd.4.auto/usb5/5-1/5-1.2/5-1.2:1.1/0003:046D:C32B.0003/input/input6
hid-generic 0003:046D:C32B.0003: input,hiddev96,hidraw2: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G910] on usb-xhci-hcd.4.auto-1.2/input1
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: System time before build time, advancing clock.
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture arm64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/libmali-setup.service:2: Unknown key name 'Descript' in section 'Unit', ignoring.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Network Service Netlink Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Condition check resulted in Huge Pages File System being skipped.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in OpenVSwitch configuration for cleanup being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
version 39.2
EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
ipmi device interface
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Condition check resulted in FUSE Control File System being skipped.
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: Starting Network Service...
systemd[1]: Started Journal Service.
systemd-journald[230]: Received client request to flush runtime journal.
systemd-journald[230]: File /var/log/journal/8a80ff1efe404216804b133144b4bbc5/system.journal corrupted or uncleanly shut down, renaming and replacing.
RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=98)
dwmac4: Master AXI performs any burst length
rk_gmac-dwmac fe2a0000.ethernet eth0: No Safety Features support found
rk_gmac-dwmac fe2a0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
rk_gmac-dwmac fe2a0000.ethernet eth0: registered PTP clock
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] only support 1 gamma
cryptd: max_cpu_qlen set to 1000
mousedev: PS/2 mouse device common for all mice
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
rk_gmac-dwmac fe2a0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fuse init (API version 7.27)
ttyFIQ ttyFIQ0: tty_port_close_start: tty->count = 1 port count = 2
[drm] only support 1 gamma
[drm] only support 1 gamma
[drm] only support 1 gamma
[drm] only support 1 gamma
[drm] only support 1 gamma
[drm] only support 1 gamma
SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled
XFS (nvme0n1p1): Mounting V5 Filesystem
XFS (nvme0n1p1): Ending clean mount
[drm] only support 1 gamma
[drm] only support 1 gamma
[drm] only support 1 gamma
[drm] only support 1 gamma
[drm] only support 1 gamma
[drm] only support 1 gamma
[drm] only support 1 gamma
[drm] only support 1 gamma