dmesg - prueba7
Linux version 5.4.0-86-generic (buildd@lgw01-amd64-036) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #97~18.04.1-Ubuntu SMP Sat Sep 18 03:11:22 UTC 2021 (Ubuntu 5.4.0-86.97~18.04.1-generic 5.4.133)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable
BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009a0bbfff] usable
BIOS-e820: [mem 0x000000009a0bc000-0x000000009aabbfff] reserved
BIOS-e820: [mem 0x000000009aabc000-0x000000009f2befff] usable
BIOS-e820: [mem 0x000000009f2bf000-0x000000009fabefff] reserved
BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
BIOS-e820: [mem 0x000000009fc00000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x99120018-0x9912ec57] usable ==> usable
e820: update [mem 0x99120018-0x9912ec57] usable ==> usable
e820: update [mem 0x99112018-0x9911f057] usable ==> usable
e820: update [mem 0x99112018-0x9911f057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000006dfff] usable
reserve setup_data: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000099112017] usable
reserve setup_data: [mem 0x0000000099112018-0x000000009911f057] usable
reserve setup_data: [mem 0x000000009911f058-0x0000000099120017] usable
reserve setup_data: [mem 0x0000000099120018-0x000000009912ec57] usable
reserve setup_data: [mem 0x000000009912ec58-0x000000009a0bbfff] usable
reserve setup_data: [mem 0x000000009a0bc000-0x000000009aabbfff] reserved
reserve setup_data: [mem 0x000000009aabc000-0x000000009f2befff] usable
reserve setup_data: [mem 0x000000009f2bf000-0x000000009fabefff] reserved
reserve setup_data: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
reserve setup_data: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
reserve setup_data: [mem 0x000000009fbff000-0x000000009fbfffff] usable
reserve setup_data: [mem 0x000000009fc00000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000021effffff] usable
efi: EFI v2.31 by INSYDE Corp.
efi: ESRT=0x9f5dcc18 ACPI=0x9fbfe000 ACPI 2.0=0x9fbfe014 SMBIOS=0x9fabef98
secureboot: Secure boot disabled
SMBIOS 2.8 present.
DMI: LENOVO 80E3/Lancer 5B2, BIOS A2CN43WW(V2.11) 01/09/2016
tsc: Fast TSC calibration using PIT
tsc: Detected 1996.270 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x21f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFE0000000 write-back
2 base 009FBA8000 mask FFFFFFF000 uncachable
3 base 00FF800000 mask FFFF800000 write-protect
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000021f000000 aka 8688M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x9fc00 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000009f5dcc18 to 0x000000009f5dcc50.
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x3d6b5000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009FBFE014 000024 (v02 LENOVO)
ACPI: XSDT 0x000000009FBFE120 0000AC (v01 LENOVO CB-01 00000001 01000013)
ACPI: FACP 0x000000009FBFC000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DSDT 0x000000009FBF0000 007291 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FACS 0x000000009FB66000 000040
ACPI: UEFI 0x000000009FBFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: HPET 0x000000009FBFB000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: APIC 0x000000009FBFA000 000090 (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MCFG 0x000000009FBF9000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASF! 0x000000009FBF8000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BOOT 0x000000009FBEF000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FPDT 0x000000009FBED000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MSDM 0x000000009FBEC000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009FBEB000 000CB4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009FBE6000 00489D (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009FBE5000 000418 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009FBE3000 00148F (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009FBE2000 00008C (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009FBE0000 001138 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009FBDE000 000FB4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BGRT 0x000000009FBDF000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: Reserving FACP table memory at [mem 0x9fbfc000-0x9fbfc10b]
ACPI: Reserving DSDT table memory at [mem 0x9fbf0000-0x9fbf7290]
ACPI: Reserving FACS table memory at [mem 0x9fb66000-0x9fb6603f]
ACPI: Reserving UEFI table memory at [mem 0x9fbfd000-0x9fbfd235]
ACPI: Reserving HPET table memory at [mem 0x9fbfb000-0x9fbfb037]
ACPI: Reserving APIC table memory at [mem 0x9fbfa000-0x9fbfa08f]
ACPI: Reserving MCFG table memory at [mem 0x9fbf9000-0x9fbf903b]
ACPI: Reserving ASF! table memory at [mem 0x9fbf8000-0x9fbf80a4]
ACPI: Reserving BOOT table memory at [mem 0x9fbef000-0x9fbef027]
ACPI: Reserving FPDT table memory at [mem 0x9fbed000-0x9fbed043]
ACPI: Reserving MSDM table memory at [mem 0x9fbec000-0x9fbec054]
ACPI: Reserving SSDT table memory at [mem 0x9fbeb000-0x9fbebcb3]
ACPI: Reserving SSDT table memory at [mem 0x9fbe6000-0x9fbea89c]
ACPI: Reserving SSDT table memory at [mem 0x9fbe5000-0x9fbe5417]
ACPI: Reserving SSDT table memory at [mem 0x9fbe3000-0x9fbe448e]
ACPI: Reserving SSDT table memory at [mem 0x9fbe2000-0x9fbe208b]
ACPI: Reserving SSDT table memory at [mem 0x9fbe0000-0x9fbe1137]
ACPI: Reserving SSDT table memory at [mem 0x9fbde000-0x9fbdefb3]
ACPI: Reserving BGRT table memory at [mem 0x9fbdf000-0x9fbdf037]
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021effffff]
NODE_DATA(0) allocated [mem 0x21efd5000-0x21effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000006dfff]
node 0: [mem 0x0000000000070000-0x0000000000087fff]
node 0: [mem 0x0000000000100000-0x000000009a0bbfff]
node 0: [mem 0x000000009aabc000-0x000000009f2befff]
node 0: [mem 0x000000009fbff000-0x000000009fbfffff]
node 0: [mem 0x0000000100000000-0x000000021effffff]
Zeroed struct page in unavailable ranges: 10171 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
On node 0 totalpages: 1824837
DMA zone: 64 pages used for memmap
DMA zone: 1132 pages reserved
DMA zone: 3973 pages, LIFO batch:0
DMA32 zone: 10083 pages used for memmap
DMA32 zone: 645312 pages, LIFO batch:63
Normal zone: 18368 pages used for memmap
Normal zone: 1175552 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
e820: update [mem 0x9ce38000-0x9ceb3fff] usable ==> reserved
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0006e000-0x0006ffff]
PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: Registered nosave memory: [mem 0x99112000-0x99112fff]
PM: Registered nosave memory: [mem 0x9911f000-0x9911ffff]
PM: Registered nosave memory: [mem 0x99120000-0x99120fff]
PM: Registered nosave memory: [mem 0x9912e000-0x9912efff]
PM: Registered nosave memory: [mem 0x9a0bc000-0x9aabbfff]
PM: Registered nosave memory: [mem 0x9ce38000-0x9ceb3fff]
PM: Registered nosave memory: [mem 0x9f2bf000-0x9fabefff]
PM: Registered nosave memory: [mem 0x9fabf000-0x9fbbefff]
PM: Registered nosave memory: [mem 0x9fbbf000-0x9fbfefff]
PM: Registered nosave memory: [mem 0x9fc00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u524288
pcpu-alloc: s188416 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 1795190
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 6964680K/7299348K available (14339K kernel code, 2381K rwdata, 4984K rodata, 2716K init, 5004K bss, 334668K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 44320 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x398cd578cbd, max_idle_ns: 881590620865 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.54 BogoMIPS (lpj=7985080)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD A8-6410 APU with AMD Radeon R5 Graphics (family: 0x16, model: 0x30, stepping: 0x1)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
do_IRQ: 1.55 No irq handler for vector
#2
do_IRQ: 2.55 No irq handler for vector
#3
do_IRQ: 3.55 No irq handler for vector
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (15970.16 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 15:54:12, date: 2021-09-29
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1632930851.160:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
pci 0000:00:01.0: [1002:9851] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:00:01.0: reg 0x24: [mem 0xf0d00000-0xf0d3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: enabling Extended Tags
pci 0000:00:01.0: BAR 0: assigned to efifb
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xf0d60000-0xf0d63fff 64bit]
pci 0000:00:01.1: enabling Extended Tags
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
pci 0000:00:02.3: enabling Extended Tags
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
pci 0000:00:02.4: enabling Extended Tags
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xf0d40000-0xf0d5ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xf0b00000-0xf0bfffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xf0d70000-0xf0d70fff]
pci 0000:00:08.0: reg 0x24: [mem 0xf0d6a000-0xf0d6bfff]
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xf0d68000-0xf0d69fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f]
pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127]
pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117]
pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123]
pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f]
pci 0000:00:11.0: reg 0x24: [mem 0xf0d6f000-0xf0d6f3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.0: reg 0x10: [mem 0xf0d6e000-0xf0d6e0ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.0: reg 0x10: [mem 0xf0d6d000-0xf0d6d0ff]
pci 0000:00:13.0: supports D1 D2
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf0d64000-0xf0d67fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xf0d6c000-0xf0d6c0ff 64bit]
pci 0000:00:14.7: PME# supported from D3cold
pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
pci 0000:01:00.0: [168c:0041] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xf0800000-0xf09fffff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: PCI bridge to [bus 01]
pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf09fffff]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf0c04000-0xf0c04fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf0c00000-0xf0c03fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.4: PCI bridge to [bus 02]
pci 0000:00:02.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.4: bridge window [mem 0xf0c00000-0xf0cfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions and events
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:01.0: vgaarb: setting as boot VGA device
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:01.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0x99112018-0x9bffffff]
e820: reserve RAM buffer [mem 0x99120018-0x9bffffff]
e820: reserve RAM buffer [mem 0x9a0bc000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9ce38000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f2bf000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xff000000-0xff000fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs ETD0624 ETD0000 PNP0f13 (active)
system 00:04: [io 0x0400-0x04cf] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0680-0x06ff] has been reserved
system 00:04: [io 0x077a] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cdb] has been reserved
system 00:04: [io 0x0840-0x0847] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xff800000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: address conflict with Reserved [mem 0xff800000-0xffffffff]
pci 0000:00:02.3: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:02.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:02.3: BAR 15: assigned [mem 0xf0e00000-0xf0ffffff 64bit pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0xf0a00000-0xf0a1ffff pref]
pci 0000:00:02.3: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:02.3: PCI bridge to [bus 01]
pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf09fffff]
pci 0000:00:02.3: bridge window [mem 0xf0e00000-0xf0ffffff 64bit pref]
pci 0000:00:02.4: PCI bridge to [bus 02]
pci 0000:00:02.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.4: bridge window [mem 0xf0c00000-0xf0cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xf0800000-0xf09fffff]
pci_bus 0000:01: resource 2 [mem 0xf0e00000-0xf0ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf0c00000-0xf0cfffff]
NET: Registered protocol family 2
IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
pci 0000:00:12.0: PME# does not work under D3, disabling it
pci 0000:00:13.0: PME# does not work under D3, disabling it
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 42276K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x93ac0000-0x97ac0000] (64MB)
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:02.3: PME: Signaling with IRQ 25
pcieport 0000:00:02.3: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
pcieport 0000:00:02.4: PME: Signaling with IRQ 27
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xe0000000, using 4224k, total 4224k
efifb: mode is 1366x768x32, linelength=5632, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
ACPI: AC Adapter [ACAD] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
battery: ACPI: Battery Slot [BAT1] (battery present)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.0: EHCI Host Controller
ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.0: debug port 2
ehci-pci 0000:00:12.0: irq 18, io mem 0xf0d6e000
ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-86-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:13.0: EHCI Host Controller
ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.0: debug port 2
ehci-pci 0000:00:13.0: irq 18, io mem 0xf0d6d000
ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-86-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-86-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:10.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-86-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:10.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:_MSS] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x07030105
microcode: CPU1: patch_level=0x07030105
microcode: CPU2: patch_level=0x07030105
microcode: CPU3: patch_level=0x07030105
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1712172092, 575841)->(1791474177, -78726244)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 25deba86190785d498ffcb39f7653a35b6e52a28'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'G4045G5045: 6ecbdd3afbb68c9b4530d63c783bed69'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 5:680:943
tty tty0: hash matches
tty console: hash matches
rtc_cmos 00:01: setting system clock to 2021-09-29T15:54:13 UTC (1632930853)
acpi_cpufreq: overriding BIOS provided _PSD data
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2716K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1160K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:00: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMBS.SMB0) (20190816/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
scsi host0: ahci
libphy: r8169: probed
r8169 0000:02:00.0 eth0: RTL8168gu/8111gu, 50:7b:9d:aa:69:aa, XID 509, IRQ 35
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xf0d6f000 port 0xf0d6f100 irq 34
ata2: SATA max UDMA/133 abar m1024@0xf0d6f000 port 0xf0d6f180 irq 34
r8169 0000:02:00.0 enp2s0: renamed from eth0
usb 2-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
hub 2-1:1.0: 4 ports detected
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
usb 2-1.2: new high-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 1996.256 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x398cbb98ce6, max_idle_ns: 881590701561 ns
clocksource: Switched to clocksource tsc
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD2500BEVT-35A23T0, 01.01A01, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
ata2.00: ATAPI: hp CDDVDW SU-208FB, HH00, max UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-3 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM hp CDDVDW SU-208FB HH00 PQ: 0 ANSI: 5
usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: USB2.0-CRW
usb 1-1.3: Manufacturer: Generic
usb 1-1.3: SerialNumber: 20100201396000000
usbcore: registered new interface driver rtsx_usb
usb 2-1.2: New USB device found, idVendor=0bda, idProduct=579a, bcdDevice= 0.06
usb 2-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 2-1.2: Product: Lenovo EasyCamera
usb 2-1.2: Manufacturer: J58FC4L24
usb 2-1.2: SerialNumber: 200901010001
sda: sda1 sda2
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sd 0:0:0:0: [sda] Attached SCSI disk
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03)
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 2-1.3: new full-speed USB device number 4 using ehci-pci
psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a.
psmouse serio1: elantech: Elan sample query result 05, 20, 97
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
usb 2-1.3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
fbcon: Taking over console
Console: switching to colour frame buffer device 170x48
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-postgresql.slice.
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[277]: Received request to flush runtime journal from PID 1
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
ccp 0000:00:08.0: 4 command queues available
ccp 0000:00:08.0: ccp enabled
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input7
cryptd: max_cpu_qlen set to 1000
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
[drm] radeon kernel modesetting enabled.
radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf07fffff
radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0d00000 -> 0xf0d3ffff
checking generic (e0000000 420000) vs hw (e0000000 10000000)
fb0: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
radeon 0000:00:01.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (MULLINS 0x1002:0x9851 0x17AA:0x3801 0x05).
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 8388608
resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
caller pci_map_rom+0x71/0x1d0 mapping multiple BARs
ATOM BIOS: AMD
radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 3539896 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading mullins Microcode
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
ath10k_pci 0000:01:00.0: qca6164 hw2.1 target 0x05010000 chip_id 0x003405ff sub 17aa:3545
ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
ath10k_pci 0000:01:00.0: firmware ver SW_RM.1.1.1-00157-QCARMSWPZ-1 api 5 features ignore-otp,no-4addr-pad crc32 10bf8e08
[drm] Found UVD firmware Version: 1.64 Family ID: 9
ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 ae2e275a
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000006b02f1d5
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0x0000000010b63983
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0x000000008057cce8
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000000062150c96
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0x0000000005e1f934
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0x00000000f01a0c72
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0x00000000628410d4
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0x00000000a4a9942b
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 12 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
usbcore: registered new interface driver btusb
Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000200.bin
Bluetooth: hci0: QCA: patch rome 0x200 build 0x299, firmware rome 0x200 build 0x111
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] eDP-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
Bluetooth: hci0: using NVM file: qca/nvm_usb_00000200.bin
ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
ath10k_pci 0000:01:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
[drm] fb mappable at 0xE0731000
[drm] vram apper at 0xE0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:579a)
input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC1D0: inputs:
snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
AMD-Vi: AMD IOMMUv2 functionality not available on this system
[drm] amdgpu kernel modesetting enabled.
CRAT table not found
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
audit: type=1400 audit(1632930908.611:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=748 comm="apparmor_parser"
audit: type=1400 audit(1632930908.611:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=748 comm="apparmor_parser"
audit: type=1400 audit(1632930908.611:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=748 comm="apparmor_parser"
audit: type=1400 audit(1632930908.611:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=749 comm="apparmor_parser"
audit: type=1400 audit(1632930908.619:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=751 comm="apparmor_parser"
audit: type=1400 audit(1632930908.619:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=751 comm="apparmor_parser"
audit: type=1400 audit(1632930909.439:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=745 comm="apparmor_parser"
audit: type=1400 audit(1632930909.439:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=745 comm="apparmor_parser"
audit: type=1400 audit(1632930909.439:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=745 comm="apparmor_parser"
audit: type=1400 audit(1632930909.439:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=745 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Generic FE-GE Realtek PHY r8169-200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
r8169 0000:02:00.0 enp2s0: Link is Down
ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
wlp1s0: authenticate with a4:98:13:52:91:43
wlp1s0: send auth to a4:98:13:52:91:43 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with a4:98:13:52:91:43 (try 1/3)
wlp1s0: RX AssocResp from a4:98:13:52:91:43 (capab=0x431 status=0 aid=5)
wlp1s0: associated
ath: EEPROM regdomain: 0x81e4
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x10
ath: Country alpha2 being used: MX
ath: Regpair used: 0x10
ath: regdomain 0x81e4 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3139 > 3132), lowering kernel.perf_event_max_sample_rate to 63500
r8169 0000:02:00.0 enp2s0: Link is Down
r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx
r8169 0000:02:00.0 enp2s0: Link is Down
r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx
kauditd_printk_skb: 84 callbacks suppressed
audit: type=1400 audit(1632944088.415:96): apparmor="DENIED" operation="capable" profile="/snap/snapd/13170/usr/lib/snapd/snap-confine" pid=16204 comm="snap-confine" capability=4 capname="fsetid"
audit: type=1326 audit(1632944093.551:97): auid=1000 uid=1000 gid=1000 ses=3 pid=16302 comm="glxinfo" exe="/snap/vlc/2344/usr/bin/glxinfo" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f225d310c7f code=0x50000
audit: type=1326 audit(1632944093.551:98): auid=1000 uid=1000 gid=1000 ses=3 pid=16302 comm="glxinfo" exe="/snap/vlc/2344/usr/bin/glxinfo" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f225d310c7f code=0x50000
audit: type=1326 audit(1632944093.555:99): auid=1000 uid=1000 gid=1000 ses=3 pid=16302 comm="glxinfo" exe="/snap/vlc/2344/usr/bin/glxinfo" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f225d310c7f code=0x50000
audit: type=1326 audit(1632944093.555:100): auid=1000 uid=1000 gid=1000 ses=3 pid=16302 comm="glxinfo" exe="/snap/vlc/2344/usr/bin/glxinfo" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f225d310c7f code=0x50000
audit: type=1326 audit(1632944093.555:101): auid=1000 uid=1000 gid=1000 ses=3 pid=16302 comm="glxinfo" exe="/snap/vlc/2344/usr/bin/glxinfo" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f225d310c7f code=0x50000
audit: type=1326 audit(1632944093.555:102): auid=1000 uid=1000 gid=1000 ses=3 pid=16302 comm="glxinfo" exe="/snap/vlc/2344/usr/bin/glxinfo" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f225d310c7f code=0x50000
audit: type=1326 audit(1632944093.555:103): auid=1000 uid=1000 gid=1000 ses=3 pid=16302 comm="glxinfo" exe="/snap/vlc/2344/usr/bin/glxinfo" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f225d310c7f code=0x50000
audit: type=1326 audit(1632944093.555:104): auid=1000 uid=1000 gid=1000 ses=3 pid=16302 comm="glxinfo" exe="/snap/vlc/2344/usr/bin/glxinfo" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f225d310c7f code=0x50000
audit: type=1326 audit(1632944093.555:105): auid=1000 uid=1000 gid=1000 ses=3 pid=16302 comm="glxinfo" exe="/snap/vlc/2344/usr/bin/glxinfo" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f225d310c7f code=0x50000
audit: type=1326 audit(1632944099.479:106): auid=1000 uid=1000 gid=1000 ses=3 pid=16204 comm="vlc" exe="/snap/vlc/2344/usr/bin/vlc" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f29653d0c7f code=0x50000
audit: type=1326 audit(1632944099.479:107): auid=1000 uid=1000 gid=1000 ses=3 pid=16204 comm="vlc" exe="/snap/vlc/2344/usr/bin/vlc" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f29653d0c7f code=0x50000
audit: type=1326 audit(1632944099.479:108): auid=1000 uid=1000 gid=1000 ses=3 pid=16204 comm="vlc" exe="/snap/vlc/2344/usr/bin/vlc" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f29653d0c7f code=0x50000
audit: type=1326 audit(1632944099.479:109): auid=1000 uid=1000 gid=1000 ses=3 pid=16204 comm="vlc" exe="/snap/vlc/2344/usr/bin/vlc" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f29653d0c7f code=0x50000
audit: type=1326 audit(1632944099.479:110): auid=1000 uid=1000 gid=1000 ses=3 pid=16204 comm="vlc" exe="/snap/vlc/2344/usr/bin/vlc" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f29653d0c7f code=0x50000
audit: type=1326 audit(1632944099.479:111): auid=1000 uid=1000 gid=1000 ses=3 pid=16204 comm="vlc" exe="/snap/vlc/2344/usr/bin/vlc" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f29653d0c7f code=0x50000
audit: type=1326 audit(1632944099.479:112): auid=1000 uid=1000 gid=1000 ses=3 pid=16204 comm="vlc" exe="/snap/vlc/2344/usr/bin/vlc" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f29653d0c7f code=0x50000
audit: type=1326 audit(1632944099.479:113): auid=1000 uid=1000 gid=1000 ses=3 pid=16204 comm="vlc" exe="/snap/vlc/2344/usr/bin/vlc" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f29653d0c7f code=0x50000
audit: type=1326 audit(1632944099.483:114): auid=1000 uid=1000 gid=1000 ses=3 pid=16204 comm="vlc" exe="/snap/vlc/2344/usr/bin/vlc" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f29653d0c7f code=0x50000
audit: type=1400 audit(1632944101.955:115): apparmor="DENIED" operation="open" profile="snap.vlc.vlc" name="/etc/glvnd/egl_vendor.d/" pid=16204 comm="vlc" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1632944768.234:116): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/11743/usr/lib/snapd/snap-confine" pid=17945 comm="apparmor_parser"
audit: type=1400 audit(1632944768.234:117): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/11743/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=17945 comm="apparmor_parser"
audit: type=1400 audit(1632944768.694:118): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=17947 comm="apparmor_parser"
audit: type=1400 audit(1632944768.726:119): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=17949 comm="apparmor_parser"
r8169 0000:02:00.0 enp2s0: Link is Down
r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx
r8169 0000:02:00.0 enp2s0: Link is Down
r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx
r8169 0000:02:00.0 enp2s0: Link is Down
r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx
r8169 0000:02:00.0 enp2s0: Link is Down
r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx
r8169 0000:02:00.0 enp2s0: Link is Down
r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx
r8169 0000:02:00.0 enp2s0: Link is Down