dmesg - emmc
Booting Linux on physical CPU 0x0
Linux version 4.9.201-tegra (aetina@aetina-virtual-machine) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Tue May 25 16:34:08 CST 2021
Boot CPU: AArch64 Processor [4e0f0040]
OF: fdt:memory scan node memory, reg size 48,
OF: fdt: - 80000000 , 2c000000
OF: fdt: - ac200000 , 44800000
OF: fdt: - 100000000 , 180000000
earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '')
bootconsole [tegra_comb_uart0] enabled
Found tegra_fbmem: 00800000@a06a0000
Found lut_mem: 00002008@a069a000
OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB
OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem
cma: Reserved 64 MiB at 0x00000000c2000000
On node 0 totalpages: 2031101
DMA zone: 7160 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 458237 pages, LIFO batch:31
Normal zone: 24576 pages used for memmap
Normal zone: 1572864 pages, LIFO batch:31
psci: probing for conduit method from DT.
psci: PSCIv1.0 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.1
percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304
pcpu-alloc: s57560 r8192 d32552 u98304 alloc=24*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
Speculative Store Bypass Disable mitigation not required
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999365
Kernel command line: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06a0000 lut_mem=0x2008@0xa069a000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
log_buf_len individual max cpu contribution: 32768 bytes
log_buf_len total cpu_extra contributions: 163840 bytes
log_buf_len min size: 32768 bytes
log_buf_len: 262144 bytes
early log buf free: 29180(89%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Memory: 7182108K/8124404K available (15422K kernel code, 2960K rwdata, 6876K rodata, 8640K init, 635K bss, 188632K reserved, 753664K cma-reserved)
Virtual kernel memory layout:
modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
.text : 0xffffff8008080000 - 0xffffff8008f90000 ( 15424 KB)
.rodata : 0xffffff8008f90000 - 0xffffff8009650000 ( 6912 KB)
.init : 0xffffff8009650000 - 0xffffff8009ec0000 ( 8640 KB)
.data : 0xffffff8009ec0000 - 0xffffff800a1a4008 ( 2961 KB)
.bss : 0xffffff800a1a4008 - 0xffffff800a242e9c ( 636 KB)
fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual)
memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
NR_IRQS:64 nr_irqs:64 0
GIC: Using split EOI/Deactivate mode
arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns
sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns
Console: colour dummy device 80x25
console [tty0] enabled
bootconsole [tegra_comb_uart0] disabled
kmemleak: Kernel memory leak detector disabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
ftrace: allocating 47587 entries in 186 pages
sched-energy: Sched-energy-costs installed from DT
ASID allocator initialised with 65536 entries
tegra-id: chipid=21917.
tegra-id: opt_subrevision=1.
Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0
DTS File Name: R32_5_1_Xavier-NX_AN810_Camera_IMX290_six_1.dts
DTB Build time: May 25 2021 16:34:44
CPU1: Booted secondary processor [4e0f0040]
CPU2: Booted secondary processor [4e0f0040]
CPU3: Booted secondary processor [4e0f0040]
CPU4: Booted secondary processor [4e0f0040]
CPU5: Booted secondary processor [4e0f0040]
Brought up 6 CPUs
SMP: Total of 6 processors activated.
CPU features: detected feature: Privileged Access Never
CPU features: detected feature: LSE atomic instructions
CPU features: detected feature: User Access Override
CPU features: detected feature: 32-bit EL0 Support
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
Initilizing CustomIPI irq domain
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
OS set in device tree is not L4T.
regulator-dummy: no parameters
Initializing plugin-manager
Plugin module not found
Plugin-manager status disabled
NET: Registered protocol family 16
pstore: using zlib compression
console [pstore-1] enabled
pstore: Registered ramoops as persistent store backend
ramoops: attached 0x200000@0xf0800000, ecc: 0/0
cpuidle: using governor menu
bpmp: waiting for handshake
bpmp: handshake completed
bpmp: synchronizing channels
bpmp: channels synchronized
bpmp: mail init ok
t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2
t19x-arm-smmu 12000000.iommu: probing hardware configuration...
t19x-arm-smmu 12000000.iommu: SMMUv2 with:
t19x-arm-smmu 12000000.iommu: stage 1 translation
t19x-arm-smmu 12000000.iommu: stage 2 translation
t19x-arm-smmu 12000000.iommu: nested translation
t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80
t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)!
t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only)
t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA
t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA
vdso: 2 pages (1 code @ ffffff8008f97000, 1 data @ ffffff8009ec4000)
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
tegra_aon_clk_init: ok
Registering BPMP clocks...
tegra_bpmp_clk_init: clock init ok (400 clks)
tegra_powergate_init: DONE
DTS File Name: R32_5_1_Xavier-NX_AN810_Camera_IMX290_six_1.dts
DTB Build time: May 25 2021 16:34:44
Tegra reboot handler registered.
iommu: Adding device 14160000.pcie to group 0
iommu: Adding device 141a0000.pcie to group 1
iommu: Adding device 2490000.ether_qos to group 2
iommu: Adding device 3100000.serial to group 3
iommu: Adding device 3110000.serial to group 4
iommu: Adding device 3140000.serial to group 5
tegra-pmc c360000.pmc: scratch reg offset dts data not present
tegra-pmc: get_secure_pmc_setting: done secure_pmc=0
tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET
tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1
tegra-pmc: ### PMC reset status reg: 0x2d
tegra-pmc: PMC Prod config success
padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
tegra-pmc c360000.pmc: IO padctrl driver initialized
iommu: Adding device 3460000.sdhci to group 6
iommu: Adding device 3440000.sdhci to group 7
iommu: Adding device 3230000.spi to group 8
iommu: Adding device 3270000.spi to group 9
iommu: Adding device 3160000.i2c to group 10
iommu: Adding device c240000.i2c to group 11
iommu: Adding device 3180000.i2c to group 12
iommu: Adding device 3190000.i2c to group 13
iommu: Adding device 31b0000.i2c to group 14
iommu: Adding device 31c0000.i2c to group 15
iommu: Adding device c250000.i2c to group 16
iommu: Adding device 31e0000.i2c to group 17
iommu: Adding device sound to group 18
iommu: Adding device 3510000.hda to group 19
iommu: Adding device bc00000.rtcpu to group 20
iommu: Adding device 13e10000.host1x to group 21
iommu: Adding device 13e10000.host1x:ctx0 to group 22
iommu: Adding device 13e10000.host1x:ctx1 to group 23
iommu: Adding device 13e10000.host1x:ctx2 to group 24
iommu: Adding device 13e10000.host1x:ctx3 to group 25
iommu: Adding device 13e10000.host1x:ctx4 to group 26
iommu: Adding device 13e10000.host1x:ctx5 to group 27
iommu: Adding device 13e10000.host1x:ctx6 to group 28
iommu: Adding device 13e10000.host1x:ctx7 to group 29
iommu: Adding device 15340000.vic to group 30
iommu: Adding device 15380000.nvjpg to group 31
iommu: Adding device 15500000.tsec to group 32
iommu: Adding device 15100000.tsecb to group 33
iommu: Adding device 15480000.nvdec to group 34
iommu: Adding device 15140000.nvdec1 to group 35
iommu: Adding device 154c0000.nvenc to group 36
iommu: Adding device 15a80000.nvenc1 to group 37
iommu: Adding device 15880000.nvdla0 to group 38
iommu: Adding device 158c0000.nvdla1 to group 39
iommu: Adding device 15200000.nvdisplay to group 40
platform 15200000.nvdisplay: IOVA linear map 0x00000000a06a0000(800000)
platform 15200000.nvdisplay: IOVA linear map 0x00000000a069a000(3000)
platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000)
t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client
iommu: Adding device 15210000.nvdisplay to group 41
t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client
iommu: Adding device 15c10000.vi to group 42
t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client
iommu: Adding device 14800000.isp to group 43
iommu: Adding device 16000000.pva0 to group 44
iommu: Adding device 16800000.pva1 to group 45
iommu: Adding device 15810000.se to group 46
iommu: Adding device 15820000.se to group 47
iommu: Adding device 15830000.se to group 48
iommu: Adding device 15840000.se to group 49
iommu: Adding device c1a0000.aon to group 50
iommu: Adding device d000000.bpmp to group 51
bpmp: ping status is 0
bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035
bpmp d000000.bpmp: probe ok
tegra-reset 0.bpmp_reset: registered 190 resets.
iommu: Adding device smmu_test to group 52
mc: mapped MMIO address: 0xffffff800a610000 -> 0x2c10000
mc: mapped MMIO address: 0xffffff800a630000 -> 0x2c20000
mc: mapped MMIO address: 0xffffff800a650000 -> 0x2c30000
mc: mapped MMIO address: 0xffffff800a670000 -> 0x2c40000
mc: mapped MMIO address: 0xffffff800a690000 -> 0x2c50000
mc: mapped MMIO address: 0xffffff800a6b0000 -> 0x2b80000
mc: mapped MMIO address: 0xffffff800a6d0000 -> 0x2b90000
mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2ba0000
mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2bb0000
mc: mapped MMIO address: 0xffffff800b110000 -> 0x1700000
mc: mapped MMIO address: 0xffffff800b130000 -> 0x1710000
mc: mapped MMIO address: 0xffffff800b150000 -> 0x1720000
mc: mapped MMIO address: 0xffffff800b170000 -> 0x1730000
mc: mapped MMIO address: 0xffffff800b190000 -> 0x1740000
mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1750000
mc: mapped MMIO address: 0xffffff800b1d0000 -> 0x1760000
mc: mapped MMIO address: 0xffffff800b1f0000 -> 0x1770000
mc-err: mcerr ops are set to t19x
iommu: Adding device 2600000.dma to group 53
gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip
GPIO line 339 (wifi-enable) hogged as output/high
GPIO line 412 (camera-control-output-low) hogged as output/low
GPIO line 413 (camera-control-output-low) hogged as output/low
GPIO line 446 (dap5_dout_pt6) hogged as output/low
gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio)
gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip
GPIO line 253 (pex-refclk-sel-low) hogged as output/low
GPIO line 266 (w-disable1) hogged as output/high
GPIO line 264 (w-disable2) hogged as output/high
GPIO line 265 (suspend-led-gpio) hogged as output/high
gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon)
tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a
tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3
tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256
iommu: Adding device 3550000.xudc to group 54
iommu: Adding device 3610000.xhci to group 55
arm64_ras arm64_ras: probed
ras_fhi_enable: FHI 469 enabled on CPU0
ras_fhi_enable: FHI 470 enabled on CPU1
ras_fhi_enable: FHI 471 enabled on CPU2
ras_fhi_enable: FHI 472 enabled on CPU3
ras_fhi_enable: FHI 473 enabled on CPU4
ras_fhi_enable: FHI 474 enabled on CPU5
carmel_ras_enable: RAS enabled on cpu0
carmel_ras_enable: RAS enabled on cpu1
carmel_ras_enable: RAS enabled on cpu2
carmel_ras_enable: RAS enabled on cpu3
carmel_ras_enable: RAS enabled on cpu4
carmel_ras_enable: RAS enabled on cpu5
carmel_ras carmel_ras: probed
tegra-cbb 2300000.cbb-noc: noc_secure_irq = 478, noc_nonsecure_irq = 477>
tegra-cbb c600000.aon-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479>
tegra-cbb d600000.bpmp-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481>
tegra-cbb be00000.rce-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483>
tegra-cbb b600000.sce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485>
tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet
vdd-ac-bat: 5000 mV
vdd-sdmmc1-sw: 3300 mV
vdd-1v8-sd: 1800 mV
vdd-3v3-cvb: 3300 mV
vdd-1v8-cvb: 1800 mV
vdd-epb-1v0: supplied by vdd-3v3-cvb
vdd-epb-1v0: 1000 mV
avdd-cam-2v8: 2800 mV
vdd-fan: 5000 mV
vdd-hdmi-5v0: 5000 mV
vdd_sys_en: 1200 mV
HugeTLB registered 2 MB page size, pre-allocated 0 pages
eventlib_kernel: keventlib is initialized, test id: 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
GPIO line 237 (tca9539_77_p05) hogged as output/low
gpiochip_setup_dev: registered GPIOs 232 to 247 on device: gpiochip2 (pca9539)
tegra-i2c 3180000.i2c: no acknowledge from address 0x20
pca953x 2-0020: failed reading register
pca953x: probe of 2-0020 failed with error -121
tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe
max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1
vdd-1v0: at 1000 mV
vdd-1v8-hs: at 1800 mV
vdd-1v8-ls: at 1800 mV
vdd-1v8-ao: at 1800 mV
vddio-ddr-1v1: at 1100 mV
vdd-rtc: at 800 mV
spmic-ldo1: at 2375 mV
vdd-ao-3v3: at 3300 mV
vddio-emmc-3v3: at 3300 mV
spmic-ldo4: at 1587 mV
vdd-usb-3v3: at 3300 mV
vddio-sdmmc1-3v3: at 3300 mV
vdd-csi-1v2: at 1200 mV
spmic-ldo8: at 1800 mV
GPIO line 230 (gpio_default) hogged as output/high
GPIO line 231 (gpio_default) hogged as output/high
gpiochip_setup_dev: registered GPIOs 224 to 231 on device: gpiochip3 (max77620-gpio)
max77620 4-003c: max77620 probe successful
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated
tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec
tegra_wdt_t18x 30c0000.watchdog: Registered successfully
trusty trusty: trusty version: Built: 08:40:57 Feb 19 2021
trusty trusty: selected api version: 3 (requested 3)
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
camchar: rtcpu character device driver loaded
gpio tegra-gpio wake61 for gpio=201(Z:1)
extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
nvmap_heap_init: nvmap_heap_init: created heap block cache
tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores
dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000
cma: enabled page replacement for spfn=c6000, epfn=f0000
dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf
nvmap_page_pool_init: Total RAM pages: 1983943
nvmap_page_pool_init: nvmap page pool size: 247992 pages (968 MB)
nvmap_background_zero_thread: PP zeroing thread starting.
misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB)
tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels
thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm
thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm
thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm
thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm
thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
la/ptsa driver initialized.
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 7064K
host1x 13e10000.host1x: initialized
hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.888:1): initialized
workingset: timestamp_bits=46 max_order=21 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ntfs: driver 2.1.32 [Flags: R/W].
9p: Installing v9fs 9p2000 file system support
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
io scheduler noop registered
io scheduler cfq registered (default)
gic 2a41000.agic-controller: GIC IRQ controller registered
random: fast init done
iommu: Adding device 2993000.adsp to group 56
iommu: Adding device aconnect@2a41000:adsp_audio to group 57
tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered
tegra-pwm 3280000.pwm: PWM clk can sleep in ops
tegra-pwm c340000.pwm: PWM clk can sleep in ops
tegra-pwm 32c0000.pwm: PWM clk can sleep in ops
tegra-pwm 32d0000.pwm: PWM clk can sleep in ops
tegra-pwm 32f0000.pwm: PWM clk can sleep in ops
tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1562500, vi_iso_bw=4500000, max_bw=4500000
tsec 15500000.tsec: initialized
tsec 15100000.tsecb: initialized
nvdec 15480000.nvdec: initialized
nvdec 15140000.nvdec1: initialized
falcon 15340000.vic: initialized
falcon 15380000.nvjpg: initialized
falcon 154c0000.nvenc: initialized
falcon 15a80000.nvenc1: initialized
iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56)
iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57)
iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58)
iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59)
iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60)
iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61)
iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62)
iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63)
t194-nvcsi 15a00000.nvcsi: initialized
scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized
scare-pigeon 14b00000.isp-thi: initialized
pva 16000000.pva0: initialized
pva 16800000.pva1: initialized
nvdla 15880000.nvdla0: initialized
nvdla 158c0000.nvdla1: initialized
tegradccommon 15200000.dc_common: host1x channel mapped
tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated
tegradccommon 15200000.dc_common: dma mapping done
tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=77
tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0.
tegra_cec 3960000.tegra_cec: Enable clock result: 0.
tegra_cec 3960000.tegra_cec: tegra_cec_init started
tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0
tegra_cec 3960000.tegra_cec: probed
tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1
generic_infoframe_type: 0x87
tegradc 15200000.nvdisplay: DT parsed successfully
tegradc 15200000.nvdisplay: Display dc.ffffff800bd90000 registered with id=0
tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 7088400 KB/s
tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 800000000 Hz
tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz
tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0
tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0
tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937
tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board
tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed
tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels
tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled
tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized
kfuse 3830000.kfuse: initialized
tegradc 15200000.nvdisplay: probed
console [ttyTCU0] enabled
[drm] Initialized
brd: module loaded
loop: module loaded
tegra_profiler: version: 1.143, samples/io: 48/28
tegra_profiler: auth: init
Console: switching to colour frame buffer device 240x67
tegradc 15200000.nvdisplay: fb registered
gpio tegra-gpio wake63 for gpio=97(M:1)
THERMAL EST: found 3 subdevs
THERMAL EST num_resources: 0
[THERMAL EST subdev 0]
[THERMAL EST subdev 1]
[THERMAL EST subdev 2]
THERMAL EST: Found 2 profiles, default profile is quiet
thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est
THERMAL EST: thz register success.
THERMAL EST: end of probe, return err: 0
tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
sd: No Scsi addr parsed to reserve index
hisi_sas: driver version v1.6
Parent Clock set for DC plld2
qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000
qspi_mtd spi6.0: s25fs256s (32768 Kbytes)
qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0
1 ofpart partitions found on MTD device spi6.0
Creating 1 MTD partitions on "spi6.0":
0x000000000000-0x000002000000 : "Whole_flash0"
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
CAN device driver interface
Message RAM Configuration
| base addr |0x0c312000|
| sidfc_flssa |0x00000000|
| xidfc_flesa |0x00000040|
| rxf0c_f0sa |0x000000c0|
| rxf1c_f1sa |0x000009c0|
| rxbc_rbsa |0x000009c0|
| txefc_efsa |0x000009c0|
| txbc_tbsa |0x00000a40|
| tmc_tmsa |0x00000ec0|
Release 3.2.0 from 19.12.2014
net can0: mttcan device registered (regs=ffffff800a4ad000, irq=63)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
Copyright(c) 1999 - 2017 Intel Corporation.
tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m
tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL.
tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL.
extcon-disp-state external-connection:disp-state: cable 47 state 1
Extcon AUX1(HDMI) enable
tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor
tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node
tegradc 15210000.nvdisplay: DT parsed successfully
tegradc 15210000.nvdisplay: Display dc.ffffff800d110000 registered with id=1
tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1
tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1
tegradc 15210000.nvdisplay: probed
tegradc 15210000.nvdisplay: fb registered
hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
tegradc 15210000.nvdisplay: blank - powerdown
extcon-disp-state external-connection:disp-state: cable 44 state 0 already set.
Extcon DP: HPD disabled
hpd: hpd_switch 0
hpd: switching from state 0 (Reset) to state 1 (Check Plug)
hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
tegradc 15200000.nvdisplay: blank - powerdown
extcon-disp-state external-connection:disp-state: cable 47 state 0
Extcon AUX1(HDMI) disable
eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg
eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 5 c0 a9
libphy: dwc_phy: probed
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver r8152
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver qmi_wwan
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP
tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4d97000 id
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver option
tegra-xusb 3610000.xhci: Firmware timestamp: 2019-07-24 05:47:34 UTC, Version: 60.06 release
tegra-xusb 3610000.xhci: xHCI Host Controller
tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1
tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810
tegra-xusb 3610000.xhci: irq 464, io mem 0x03610000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd
usb usb1: SerialNumber: 3610000.xhci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
tegra-xusb 3610000.xhci: xHCI Host Controller
tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2
tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd
usb usb2: SerialNumber: 3610000.xhci
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
Wake76 for irq=199
Wake77 for irq=199
Wake78 for irq=199
Wake79 for irq=199
Wake80 for irq=199
Wake81 for irq=199
Wake82 for irq=199
tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0
tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0
tegra_nvdisp_handle_pd_disable: Powergated Head1 pd
tegra_nvdisp_handle_pd_disable: Powergated Head0 pd
tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled
tegra-xudc-new 3550000.xudc: device count: 1
tegra-xudc-new 3550000.xudc: vbus state: 0
tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work
tegra-xudc-new 3550000.xudc: entering ELPG
tegra-xudc-new 3550000.xudc: entering ELPG done
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver xpad
usb usb2: usb_suspend_both: status 0
tegradc 15200000.nvdisplay: unblank
tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
Parent Clock set for DC plld2
tegradc 15200000.nvdisplay: hdmi: tmds rate:533250K prod-setting:prod_c_hdmi_300m_600m
tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID.
max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
Wake73 for irq=42
rtc rtc1: alarm rtc device
tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1
tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock
i2c /dev entries driver
pca954x 2-0070: vcc-pullup regulator not found
pca954x 2-0070: pca954x_probe: forcing device bus number, start 30.
pca954x 2-0070: device detect skipped.
i2c i2c-2: Added multiplexed i2c bus 30
i2c i2c-2: Added multiplexed i2c bus 31
i2c i2c-2: Added multiplexed i2c bus 32
i2c i2c-2: Added multiplexed i2c bus 33
i2c i2c-2: Added multiplexed i2c bus 34
i2c i2c-2: Added multiplexed i2c bus 35
i2c i2c-2: Added multiplexed i2c bus 36
i2c i2c-2: Added multiplexed i2c bus 37
pca954x 2-0070: registered 8 multiplexed busses for I2C switch pca9548
max77620-power max20024-power: Event recorder REG_NVERC : 0x0
tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer
FAN dev name: pwm-fan
FAN:gpio request success.
FAN: can't find tach_gpio
pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet
pwm_fan_driver pwm-fan: cap state:4, cap pwm:255
pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
pwm_fan_driver pwm-fan: tach period: 1000
pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2
pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2
pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2
pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
tegra-oc-event d280000.soctherm-oc-event: OC driver initialized
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
tegra194_cpufreq_probe: platform driver Initialization: pass
cpuidle: Initializing cpuidle driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-tegra 3460000.sdhci: Client registration for eMC Successful
CMDQ: cmdq_platfm_init successful
sdhci-tegra 3440000.sdhci: Got CD GPIO
sdhci-tegra 3440000.sdhci: Client registration for eMC Successful
tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete
tegra-se-nvhost 15810000.se: initialized
tegra-se-nvhost 15810000.se: tegra_se_probe: complete
tegra-se-nvhost 15820000.se: initialized
tegra-se-nvhost 15820000.se: tegra_se_probe: complete
tegra-se-nvhost 15830000.se: initialized
tegra-se-nvhost 15830000.se: tegra_se_probe: complete
tegra-se-nvhost 15840000.se: initialized
tegra-se-nvhost 15840000.se: tegra_se_probe: complete
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
extcon-disp-state external-connection:disp-state: cable 47 state 1
Extcon AUX1(HDMI) enable
tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed
tegra_aon c1a0000.aon: tegra aon driver probe OK
tegra186-aondbg aondbg: aondbg driver probe() OK
denver_knobs_init:MTS_VERSION:51035886
tegra19x_actmon d230000.actmon: in actmon_register()...
tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all
t19x_cache tegra-cache: probed
misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304
misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB)
carmel-pmu-drv carmel-pmu: Registered Carmel PMU
PLL_AON clock registered
Clocks initialized successfully
nvpmodel: initialized successfully
trusty-virtio trusty:virtio: initializing
trusty_ipc virtio0: vring0: va(pa) ffffffc1e26ba000(0) qsz 32 notifyid 1
trusty_ipc virtio0: vring1: va(pa) ffffffc1e2740000(0) qsz 32 notifyid 2
trusty-virtio trusty:virtio: initializing done
trusty_ipc virtio0: is online
tegra-hda 3510000.hda: Override SDO lines to 4
usbcore: registered new interface driver snd-usb-audio
tegradc 15200000.nvdisplay: sync windows ret = 246
mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr
gpio tegra-gpio wake50 for gpio=207(Z:7)
mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr
input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0
input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1
input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2
input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3
extcon-disp-state external-connection:disp-state: cable 51 state 1
Extcon HDMI: HPD enabled
tegradc 15200000.nvdisplay: hdmi: plugged
mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1
mmc1: host does not support reading read-only switch, assuming write-enable
mmc1: new high speed SDHC card at address 0260
mmcblk1: mmc1:0260 i-TF 14.4 GiB
mmcblk1: p1
mmc0: periodic cache flush enabled
mmc0: new HS400 Enhanced strobe MMC card at address 0001
mmcblk0: mmc0:0001 DG4016 14.7 GiB
mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB
OPE platform probe
OPE platform probe successful
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
tegra-asoc: sound: ADMAIF1 ADMAIF1 mapping ok
tegra-asoc: sound: ADMAIF2 ADMAIF2 mapping ok
tegra-asoc: sound: ADMAIF3 ADMAIF3 mapping ok
tegra-asoc: sound: ADMAIF4 ADMAIF4 mapping ok
tegra-asoc: sound: ADMAIF5 ADMAIF5 mapping ok
tegra-asoc: sound: ADMAIF6 ADMAIF6 mapping ok
tegra-asoc: sound: ADMAIF7 ADMAIF7 mapping ok
tegra-asoc: sound: ADMAIF8 ADMAIF8 mapping ok
tegra-asoc: sound: ADMAIF9 ADMAIF9 mapping ok
tegra-asoc: sound: ADMAIF10 ADMAIF10 mapping ok
tegra-asoc: sound: ADMAIF11 ADMAIF11 mapping ok
tegra-asoc: sound: ADMAIF12 ADMAIF12 mapping ok
tegra-asoc: sound: ADMAIF13 ADMAIF13 mapping ok
tegra-asoc: sound: ADMAIF14 ADMAIF14 mapping ok
tegra-asoc: sound: ADMAIF15 ADMAIF15 mapping ok
tegra-asoc: sound: ADMAIF16 ADMAIF16 mapping ok
tegra-asoc: sound: ADMAIF17 ADMAIF17 mapping ok
tegra-asoc: sound: ADMAIF18 ADMAIF18 mapping ok
tegra-asoc: sound: ADMAIF19 ADMAIF19 mapping ok
tegra-asoc: sound: ADMAIF20 ADMAIF20 mapping ok
usb usb2: usb_suspend_both: status 0
u32 classifier
Actions configured
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: netlink gateway (rev 20130117) max_hops=1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
9pnet: Installing 9P2000 support
Key type dns_resolver registered
Registered cp15_barrier emulation handler
Registered setend emulation handler
registered taskstats version 1
tegra-pcie-dw 14160000.pcie: Setting init speed to max speed
OF: PCI: host bridge /pcie@14160000 ranges:
OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000
OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000
OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000
tegra_cec 3960000.tegra_cec: physical address: 10:00.
tegra_cec 3960000.tegra_cec: Sent res: -113.
tegra_cec 3960000.tegra_cec: tegra_cec_init Done.
tegra-pcie-dw 14160000.pcie: link is down
tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00
pci_bus 0004:00: root bus resource [bus 00-ff]
pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff])
pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff])
pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref]
pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400
pci 0004:00:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0004:00:00.0 to group 58
pci 0004:00:00.0: PCI bridge to [bus 01-ff]
pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded
aer 0004:00:00.0:pcie002: service driver aer loaded
pcie_pme 0004:00:00.0:pcie001: unloading service driver pcie_pme
aer 0004:00:00.0:pcie002: unloading service driver aer
pci_bus 0004:01: busn_res: [bus 01-ff] is released
iommu: Removing device 0004:00:00.0 from group 58
pci_bus 0004:00: busn_res: [bus 00-ff] is released
tegra-pcie-dw 14160000.pcie: PCIe link is not up...!
tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed
OF: PCI: host bridge /pcie@141a0000 ranges:
OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000
OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000
OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000
tegra-pcie-dw 141a0000.pcie: link is up
tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00
pci_bus 0005:00: root bus resource [bus 00-ff]
pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff])
pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff])
pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref]
pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400
pci 0005:00:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0005:00:00.0 to group 58
pci 0005:01:00.0: [1b4b:9171] type 00 class 0x010601
pci 0005:01:00.0: reg 0x10: [io 0x8000-0x8007]
pci 0005:01:00.0: reg 0x14: [io 0x8040-0x8043]
pci 0005:01:00.0: reg 0x18: [io 0x8100-0x8107]
pci 0005:01:00.0: reg 0x1c: [io 0x8140-0x8143]
pci 0005:01:00.0: reg 0x20: [io 0x800000-0x80000f]
pci 0005:01:00.0: reg 0x24: [mem 0x00900000-0x009001ff]
pci 0005:01:00.0: reg 0x30: [mem 0x1fd0000000-0x1fd000ffff pref]
pci 0005:01:00.0: PME# supported from D3hot
iommu: Adding device 0005:01:00.0 to group 59
pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff]
pci 0005:00:00.0: BAR 13: assigned [io 0x100000-0x100fff]
pci 0005:01:00.0: BAR 6: assigned [mem 0x1f40000000-0x1f4000ffff pref]
pci 0005:01:00.0: BAR 5: assigned [mem 0x1f40010000-0x1f400101ff]
pci 0005:01:00.0: BAR 4: assigned [io 0x100000-0x10000f]
pci 0005:01:00.0: BAR 0: assigned [io 0x100010-0x100017]
pci 0005:01:00.0: BAR 2: assigned [io 0x100018-0x10001f]
pci 0005:01:00.0: BAR 1: assigned [io 0x100020-0x100023]
pci 0005:01:00.0: BAR 3: assigned [io 0x100024-0x100027]
pci 0005:00:00.0: PCI bridge to [bus 01-ff]
pci 0005:00:00.0: bridge window [io 0x100000-0x100fff]
pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f400fffff]
pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pci 0005:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt
pci 0005:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded
aer 0005:00:00.0:pcie002: service driver aer loaded
ahci 0005:01:00.0: version 3.0
ahci 0005:01:00.0: AHCI 0001.0000 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0005:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi host0: ahci
ata1: SATA max UDMA/133 abar m512@0x1f40010000 port 0x1f40010100 irq 555
tegra-cbb 14040000.cv-noc: noc_secure_irq = 90, noc_nonsecure_irq = 89>
tegra194-isp5 14800000.isp: initialized
tegra194-vi5 15c10000.vi: using default number of vi channels, 36
tegra194-vi5 15c10000.vi: initialized
tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--6 bound
tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--5 bound
tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--4 bound
tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--3 bound
tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound
tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound
tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24
tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10
tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200
tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400
tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0
tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400
tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400
tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1
tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200
tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300
tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0
tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10
tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10
tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0
tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400
tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400
tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1
tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000
usb usb1: usb_suspend_both: status 0
tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072
tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900
tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00
tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00
tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00
tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000
tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (65)
tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful
tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=cf2bef3ad10e437272857b76308abef8ffb80bda
Wake83 for irq=211
gpio tegra-gpio wake67 for gpio=48(G:0)
gpio tegra-gpio-aon wake29 for gpio=36(EE:4)
input: gpio-keys as /devices/gpio-keys/input/input4
tegra_rtc c2a0000.rtc: setting system clock to 2021-07-15 08:04:29 UTC (1626336269)
mmcblk mmc1:0260: Card claimed for testing.
mmcblk mmc0:0001: Card claimed for testing.
bpmp: mounted debugfs mirror
ALSA device list:
#0: tegra-hda-xnx at 0x3518000 irq 64
#1: jetson-xaviernx-ape
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-9: M.2 (S80) 3MG2-P, M161225, max UDMA/133
ata1.00: 123166720 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA M.2 (S80) 3MG2-P 225 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 123166720 512-byte logical blocks: (63.1 GB/58.7 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
Freeing unused kernel memory: 8640K
Root device found: mmcblk0p1
Found dev node: /dev/mmcblk0p1
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
Rootfs mounted over mmcblk0p1
Switching from initrd to actual rootfs
ip_tables: (C) 2000-2006 Netfilter Core Team
cgroup: cgroup2: unknown option "nsdelegate"
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
systemd[1]: graphical.target: Wants dependency dropin /etc/systemd/system/default.target.wants/setssdroot.service is not a symlink, ignoring.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice System Slice.
EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000
cpu-throttle-alert cooling device registered.
gpu-throttle-alert cooling device registered.
aux-throttle-alert cooling device registered.
tegra-xusb 3610000.xhci: entering ELPG
tegra-xusb 3610000.xhci: entering ELPG done
systemd-journald[2409]: Received request to flush runtime journal from PID 1
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
spidev: module is already loaded
spidev: module is already loaded
using random self ethernet address
using random host ethernet address
tegra-xusb 3610000.xhci: exiting ELPG
tegra-xusb 3610000.xhci: Firmware timestamp: 2019-07-24 05:47:34 UTC, Version: 60.06 release
tegra-xusb 3610000.xhci: exiting ELPG done
usb 1-2: new high-speed USB device number 3 using tegra-xusb
usb 1-2: New USB device found, idVendor=0451, idProduct=8442
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-2: SerialNumber: 5101008965C3
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 6 ports detected
usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb
usb 2-3: New USB device found, idVendor=0451, idProduct=8440
usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
usb 1-2.2: new high-speed USB device number 4 using tegra-xusb
usb 1-2.2: New USB device found, idVendor=05e3, idProduct=0610
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB2.1 Hub
usb 1-2.2: Manufacturer: GenesysLogic
hub 1-2.2:1.0: USB hub found
hub 1-2.2:1.0: 4 ports detected
usb 1-2.5: new high-speed USB device number 5 using tegra-xusb
usb 1-2.5: New USB device found, idVendor=0451, idProduct=82ff
usb 1-2.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hid-generic 0003:0451:82FF.0001: hidraw0: USB HID v1.11 Device [HID 0451:82ff] on usb-3610000.xhci-2.5/input0
usb 2-3.1: new SuperSpeed USB device number 3 using tegra-xusb
usb 2-3.1: New USB device found, idVendor=196d, idProduct=0201
usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.1: Product: USB Drive 3ME
usb 2-3.1: Manufacturer: Innodisk
usb 2-3.1: SerialNumber: 20191123AA10H7392006
usb-storage 2-3.1:1.0: USB Mass Storage device detected
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
scsi host1: usb-storage 2-3.1:1.0
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
using random self ethernet address
using random host ethernet address
nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set
usb 2-3.2: new SuperSpeed USB device number 4 using tegra-xusb
usb 2-3.2: New USB device found, idVendor=05e3, idProduct=0626
usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.2: Product: USB3.1 Hub
usb 2-3.2: Manufacturer: GenesysLogic
hub 2-3.2:1.0: USB hub found
hub 2-3.2:1.0: 4 ports detected
usb 1-2.2.1: new full-speed USB device number 6 using tegra-xusb
usb 1-2.2.1: New USB device found, idVendor=25a7, idProduct=fa61
usb 1-2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2.1: Product: 2.4G Receiver
usb 1-2.2.1: Manufacturer: Compx
input: Compx 2.4G Receiver as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.0/0003:25A7:FA61.0002/input/input5
usb 2-3.2: usb_suspend_both: status 0
hid-generic 0003:25A7:FA61.0002: input,hidraw1: USB HID v1.10 Keyboard [Compx 2.4G Receiver] on usb-3610000.xhci-2.2.1/input0
input: Compx 2.4G Receiver as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.1/0003:25A7:FA61.0003/input/input6
gpio tegra-gpio wake20 for gpio=52(G:4)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
rndis0: HOST MAC 6e:ce:df:91:45:cc
rndis0: MAC 6e:ce:df:91:45:cd
hid-generic 0003:25A7:FA61.0003: input,hidraw2: USB HID v1.10 Mouse [Compx 2.4G Receiver] on usb-3610000.xhci-2.2.1/input1
usb0: HOST MAC 6e:ce:df:91:45:ce
usb0: MAC 6e:ce:df:91:45:cf
tegra-xudc-new 3550000.xudc: exiting ELPG
tegra-xudc-new 3550000.xudc: exiting ELPG done
tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled
tegra-xudc-new 3550000.xudc: entering ELPG
tegra-xudc-new 3550000.xudc: entering ELPG done
tegra-xudc-new 3550000.xudc: exiting ELPG
tegra-xudc-new 3550000.xudc: exiting ELPG done
tegra-xudc-new 3550000.xudc: entering ELPG
tegra-xudc-new 3550000.xudc: entering ELPG done
zram: Added device: zram0
zram: Added device: zram1
l4tbr0: port 1(rndis0) entered blocking state
l4tbr0: port 1(rndis0) entered disabled state
zram: Added device: zram2
device rndis0 entered promiscuous mode
zram: Added device: zram3
zram: Added device: zram4
zram: Added device: zram5
IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
l4tbr0: port 2(usb0) entered blocking state
l4tbr0: port 2(usb0) entered disabled state
device usb0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
usb 1-2.2.4: new high-speed USB device number 7 using tegra-xusb
zram0: detected capacity change from 0 to 678526976
usb 1-2.2.4: New USB device found, idVendor=196d, idProduct=0201
usb 1-2.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.2.4: Product: USB Drive 2SE
usb 1-2.2.4: Manufacturer: InnoDisk
usb 1-2.2.4: SerialNumber: 20191214AA10H8674008
usb-storage 1-2.2.4:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-2.2.4:1.0
Adding 662620k swap on /dev/zram0. Priority:5 extents:1 across:662620k SS
zram1: detected capacity change from 0 to 678526976
Adding 662620k swap on /dev/zram1. Priority:5 extents:1 across:662620k SS
zram2: detected capacity change from 0 to 678526976
Adding 662620k swap on /dev/zram2. Priority:5 extents:1 across:662620k SS
zram3: detected capacity change from 0 to 678526976
Adding 662620k swap on /dev/zram3. Priority:5 extents:1 across:662620k SS
zram4: detected capacity change from 0 to 678526976
Adding 662620k swap on /dev/zram4. Priority:5 extents:1 across:662620k SS
zram5: detected capacity change from 0 to 678526976
Adding 662620k swap on /dev/zram5. Priority:5 extents:1 across:662620k SS
scsi 1:0:0:0: Direct-Access Innodisk USB Drive 3ME 0917 PQ: 0 ANSI: 6
sd 1:0:0:0: [sdb] 31686656 512-byte logical blocks: (16.2 GB/15.1 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 22 00 00 00
sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Attached SCSI removable disk
scsi 2:0:0:0: Direct-Access InnoDisk USB Drive 2SE 0225 PQ: 0 ANSI: 4
sd 2:0:0:0: [sdc] 16211968 512-byte logical blocks: (8.30 GB/7.73 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] Attached SCSI removable disk
tegradc 15200000.nvdisplay: unblank
tegradc 15210000.nvdisplay: blank - powerdown
eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fuse init (API version 7.26)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP socket layer initialized
tegradc 15200000.nvdisplay: unblank
tegradc 15210000.nvdisplay: blank - powerdown
EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
vdd-sdmmc1-sw: disabling
vdd-1v8-sd: disabling
vdd-epb-1v0: disabling
avdd-cam-2v8: disabling
vdd-fan: disabling
vdd_sys_en: disabling
nvgpu: 17000000.gv11b railgate_enable_store:297 [INFO] railgate is disabled.
FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000
FAN cooling trip_level:0 cur_temp:37950 trip_temps[1]:46000
FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000
FAN cooling trip_level:0 cur_temp:37950 trip_temps[1]:46000
FAN rising trip_level:1 cur_temp:46000 trip_temps[2]:60000
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
soctherm: OC ALARM 0x00000001
FAN cooling trip_level:0 cur_temp:37950 trip_temps[1]:46000