dmesg - 1
microcode: microcode updated early to revision 0xd6, date = 2019-10-03
Linux version 5.7.7-amd64-desktop (deepin@deepin-PC) (gcc version 8.3.0 (Uos 8.3.0.3-3+rebuild), GNU ld (GNU Binutils for Uos) 2.31.1) #72 SMP Mon Aug 24 12:11:34 CST 2020
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000006d312fff] usable
BIOS-e820: [mem 0x000000006d313000-0x000000006d313fff] ACPI NVS
BIOS-e820: [mem 0x000000006d314000-0x000000006d35dfff] reserved
BIOS-e820: [mem 0x000000006d35e000-0x000000007b406fff] usable
BIOS-e820: [mem 0x000000007b407000-0x000000007b7adfff] reserved
BIOS-e820: [mem 0x000000007b7ae000-0x000000007b7ebfff] ACPI data
BIOS-e820: [mem 0x000000007b7ec000-0x000000007be53fff] ACPI NVS
BIOS-e820: [mem 0x000000007be54000-0x000000007c425fff] reserved
BIOS-e820: [mem 0x000000007c426000-0x000000007c4fefff] type 20
BIOS-e820: [mem 0x000000007c4ff000-0x000000007c4fffff] usable
BIOS-e820: [mem 0x000000007c500000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000c7dffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ACPI=0x7b7bb000 ACPI 2.0=0x7b7bb000 SMBIOS=0x7c26d000 ESRT=0x7c1e4118 SMBIOS 3.0=0x7c26c000 MEMATTR=0x791d4018
SMBIOS 3.0.0 present.
DMI: Dell Inc. Precision 7510/0RJHDG, BIOS 1.19.3 10/04/2019
tsc: Detected 2700.000 MHz processor
tsc: Detected 2699.909 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0xc7e000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 007E000000 mask 7FFE000000 uncachable
2 base 007D800000 mask 7FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x7c500 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000007c1e4118 to 0x000000007c1e4150.
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
Secure boot could not be determined
RAMDISK: [mem 0x2e08f000-0x32692fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007B7BB000 000024 (v02 DELL )
ACPI: XSDT 0x000000007B7BB0B0 0000E4 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x000000007B7DC790 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x000000007B7BB228 021568 (v02 DELL CBX3 01072009 INTL 20120913)
ACPI: FACS 0x000000007BE51E80 000040
ACPI: APIC 0x000000007B7DC8A0 0000BC (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x000000007B7DC960 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x000000007B7DC9A8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: HPET 0x000000007B7DC9E8 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
ACPI: SSDT 0x000000007B7DCA20 00046D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x000000007B7DCE90 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000007B7DCF28 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x000000007B7DD170 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 0x000000007B7DFD20 0007D9 (v02 INTEL xh_rvp07 00000000 INTL 20120913)
ACPI: DBGP 0x000000007B7E0500 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x000000007B7E0538 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000007B7E0590 003866 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x000000007B7E3DF8 000042 (v01 00000000 00000000)
ACPI: SSDT 0x000000007B7E3E40 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: SSDT 0x000000007B7E4CB8 00435D (v02 DptfTa DptfTabl 00001000 INTL 20120913)
ACPI: MSDM 0x000000007B7E9018 000055 (v03 DELL CBX3 06222004 AMI 00010013)
ACPI: SLIC 0x000000007B7E9070 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: TCPA 0x000000007B7E91E8 000032 (v02 ALASKA NAPAASF 00000000 MSFT 01000013)
ACPI: SSDT 0x000000007B7E9220 000094 (v02 SgRef SgPeg 00001000 INTL 20120913)
ACPI: DMAR 0x000000007B7E92B8 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: BGRT 0x000000007B7E9360 000038 (v00 01072009 AMI 00010013)
ACPI: SSDT 0x000000007B7E9398 0019FF (v01 OptRef OptTabl 00001000 INTL 20120913)
ACPI: ASF! 0x000000007B7EAD98 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000c7dffffff]
NODE_DATA(0) allocated [mem 0xc7dfd5000-0xc7dffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000c7dffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000006d312fff]
node 0: [mem 0x000000006d35e000-0x000000007b406fff]
node 0: [mem 0x000000007c4ff000-0x000000007c4fffff]
node 0: [mem 0x0000000100000000-0x0000000c7dffffff]
Zeroed struct page in unavailable ranges: 27815 pages
Initmem setup node 0 [mem 0x0000000000001000-0x0000000c7dffffff]
On node 0 totalpages: 12555097
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 7823 pages used for memmap
DMA32 zone: 500669 pages, LIFO batch:63
Normal zone: 188288 pages used for memmap
Normal zone: 12050432 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x7e000000-0x7fffffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
e820: update [mem 0x78e8a000-0x78f11fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x6d313000-0x6d313fff]
PM: hibernation: Registered nosave memory: [mem 0x6d314000-0x6d35dfff]
PM: hibernation: Registered nosave memory: [mem 0x78e8a000-0x78f11fff]
PM: hibernation: Registered nosave memory: [mem 0x7b407000-0x7b7adfff]
PM: hibernation: Registered nosave memory: [mem 0x7b7ae000-0x7b7ebfff]
PM: hibernation: Registered nosave memory: [mem 0x7b7ec000-0x7be53fff]
PM: hibernation: Registered nosave memory: [mem 0x7be54000-0x7c425fff]
PM: hibernation: Registered nosave memory: [mem 0x7c426000-0x7c4fefff]
PM: hibernation: Registered nosave memory: [mem 0x7c500000-0x7fffffff]
PM: hibernation: Registered nosave memory: [mem 0x80000000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u262144
pcpu-alloc: s196608 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 12358900
Policy zone: Normal
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 49126588K/50220388K available (14339K kernel code, 2525K rwdata, 5340K rodata, 2616K init, 4960K bss, 1093800K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x42/0x550 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 45364 entries in 178 pages
ftrace: allocated 178 pages with 4 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200326
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000007b529000 end: 0x0000007b548fff
DMAR: RMRR base: 0x0000007d800000 end: 0x0000007fffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26eae8729ef, max_idle_ns: 440795235156 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.81 BogoMIPS (lpj=10799636)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
elfverify: start ...
LSM initialized: elfverify, elf enabled: 1, network enabled: 1
AppArmor: AppArmor initialized
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
TAA: Mitigation: Clear CPU buffers
SRBDS: Vulnerable: No microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i7-6820HQ CPU @ 2.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4
MDS CPU bug present and SMT on, data leak possible. See for more details.
TAA CPU bug present and SMT on, data leak possible. See for more details.
#5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (43198.54 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x6d313000-0x6d313fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7b7ec000-0x7be53fff] (6717440 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 00:52:55, date: 2021-06-17
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1623891175.052:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF96F5C6537800 0005FD (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF96F5C6AC9800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF96F5C6531800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF96F5C6AC3C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xdfe40000-0xdfe47fff 64bit]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdfe30000-0xdfe3ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdfe56000-0xdfe56fff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdfe55000-0xdfe55fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdfe50000-0xdfe51fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdfe54000-0xdfe540ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdfe53000-0xdfe537ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a111] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a150] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdfe4c000-0xdfe4ffff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdfe48000-0xdfe4bfff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdfe20000-0xdfe2ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdfe52000-0xdfe520ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdfe00000-0xdfe1ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [10de:13b1] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x0fffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0x00000000-0x01ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x0000-0x007f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 256)
pci 0000:01:00.0: Enabling HDA controller
pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x00003fff]
pci 0000:01:00.1: Max Payload Size set to 256 (was 128, max 256)
pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xdfd00000-0xdfd01fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:03:00.0: [10ec:525a] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x14: [mem 0xdfc00000-0xdfc00fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xdf100000-0xdfafffff]
pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
pci 0000:05:00.0: [144d:a802] type 00 class 0x010802
pci 0000:05:00.0: reg 0x10: [mem 0xdfb00000-0xdfb03fff 64bit]
pci 0000:05:00.0: reg 0x18: [io 0xc000-0xc0ff]
pci 0000:00:1d.0: PCI bridge to [bus 05]
pci 0000:00:1d.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1d.0: bridge window [mem 0xdfb00000-0xdfbfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: EC: GPE=0x14
ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
iommu: Default domain type: Translated
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:00:02.0: vgaarb: no bridge control possible
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x6d313000-0x6fffffff]
e820: reserve RAM buffer [mem 0x78e8a000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b407000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7c500000-0x7fffffff]
e820: reserve RAM buffer [mem 0xc7e000000-0xc7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: disabling [io 0x002e-0x002f] because it overlaps 0000:01:00.0 BAR 5 [io 0x0000-0x007f]
pnp 00:00: disabling [io 0x004e-0x004f] because it overlaps 0000:01:00.0 BAR 5 [io 0x0000-0x007f]
pnp 00:00: disabling [io 0x0061] because it overlaps 0000:01:00.0 BAR 5 [io 0x0000-0x007f]
pnp 00:00: disabling [io 0x0063] because it overlaps 0000:01:00.0 BAR 5 [io 0x0000-0x007f]
pnp 00:00: disabling [io 0x0065] because it overlaps 0000:01:00.0 BAR 5 [io 0x0000-0x007f]
pnp 00:00: disabling [io 0x0067] because it overlaps 0000:01:00.0 BAR 5 [io 0x0000-0x007f]
pnp 00:00: disabling [io 0x0070] because it overlaps 0000:01:00.0 BAR 5 [io 0x0000-0x007f]
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs DLL06d9 PNP0f13 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (disabled)
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0xff00-0xfffe] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c31 (active)
pnp: PnP ACPI: found 12 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: BAR 1: assigned [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: BAR 3: assigned [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: BAR 0: assigned [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.1: BAR 0: assigned [mem 0xdf080000-0xdf083fff]
pci 0000:01:00.0: BAR 5: assigned [io 0xe000-0xe07f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xdf100000-0xdfafffff]
pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
pci 0000:00:1d.0: PCI bridge to [bus 05]
pci 0000:00:1d.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1d.0: bridge window [mem 0xdfb00000-0xdfbfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:03: resource 1 [mem 0xdfc00000-0xdfcfffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdfafffff]
pci_bus 0000:04: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xdfb00000-0xdfbfffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 71696K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x74e8a000-0x78e8a000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
start plist test
end plist test
pcieport 0000:00:01.0: PME: Signaling with IRQ 122
pcieport 0000:00:1c.0: PME: Signaling with IRQ 123
pcieport 0000:00:1c.0: AER: enabled with IRQ 123
pcieport 0000:00:1c.2: PME: Signaling with IRQ 124
pcieport 0000:00:1c.2: AER: enabled with IRQ 124
pcieport 0000:00:1c.4: PME: Signaling with IRQ 125
pcieport 0000:00:1c.4: AER: enabled with IRQ 125
pcieport 0000:00:1c.4: pciehp: Slot #8 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
pcieport 0000:00:1d.0: PME: Signaling with IRQ 126
pcieport 0000:00:1d.0: AER: enabled with IRQ 126
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xb0000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.5.1 model 0x5E
intel_idle: Local APIC timer is reliable in all C-states
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
Linux agpgart interface v0.103
tpm_tis 00:0b: 1.2 TPM (device-id 0xFE, rev-id 2)
battery: ACPI: Battery Slot [BAT0] (battery present)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.7.7-amd64-desktop xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.7.7-amd64-desktop xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2021-06-17T00:52:57 UTC (1623891177)
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
hid: raw HID events driver (C) Jiri Kosina
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x506e3, pf=0x20, revision=0xd6
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (2152958248, 563715)->(2159700954, -6178991)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: ac170f56ab75ea2da6fc59bc4db920a9f509da25'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 9:612:860
memory memory307: hash matches
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2616K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 804K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/vmlinuz-5.7.7-amd64-desktop
DEEPIN_GFXMODE=
[hook_mmap_file] command: init, device(2), mount(0), elf enabled: 1
[hook_mmap_file] command: init, device(2), mount(0), elf enabled: 1
[hook_mmap_file] command: init, device(2), mount(0), elf enabled: 1
[hook_mmap_file] command: init, device(2), mount(0), elf enabled: 1
wmi_bus wmi_bus-PNP0C14:02: WQBC data block query control method not found
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x1a impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf stag led clo only pio slum part ems sxs deso sadm sds apst
usb 1-1: new low-speed USB device number 2 using xhci_hcd
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
nvme nvme0: pci function 0000:05:00.0
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
nvme nvme0: 8/0/0 default/read/poll queues
nvme0n1: p1 p2 p3 p4 p5 p6 p7
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration
scsi host4: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xdfe53000 port 0xdfe53180 irq 128
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xdfe53000 port 0xdfe53280 irq 128
ata5: SATA max UDMA/133 abar m2048@0xdfe53000 port 0xdfe53300 irq 128
MXM: GUID detected in BIOS
ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200326/nsarguments-66)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200326/nsarguments-66)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
nouveau: detected PR support, will not use DSM
nouveau 0000:01:00.0: enabling device (0000 -> 0003)
checking generic (b0000000 7f0000) vs hw (dd000000 1000000)
checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
i915 0000:00:02.0: vgaarb: deactivate vga console
nouveau 0000:01:00.0: NVIDIA GM107 (117310a2)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a _new_ bug report on drm/i915, see for details.
usb 1-1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Optical Mouse
usb 1-1: Manufacturer: PixArt
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
nouveau 0000:01:00.0: bios: version 82.07.8f.00.1a
nouveau 0000:01:00.0: mxm: BIOS version 3.0
usb 1-6: new full-speed USB device number 3 using xhci_hcd
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 28:f1:0e:17:b0:6a
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
ata2: SATA link down (SStatus 0 SControl 300)
nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 3c7e3c [ IBUS ]
fbcon: Taking over console
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
usb 1-6: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[TTM] Zone kernel: Available graphics memory: 24620874 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.0
nouveau 0000:01:00.0: DRM: DCB outp 03: 01875fd6 04420020
nouveau 0000:01:00.0: DRM: DCB outp 04: 01075f92 00020020
nouveau 0000:01:00.0: DRM: DCB outp 05: 08814fc6 04420010
nouveau 0000:01:00.0: DRM: DCB outp 06: 08014f82 00020010
nouveau 0000:01:00.0: DRM: DCB outp 10: 02827fa6 04420010
nouveau 0000:01:00.0: DRM: DCB outp 11: 02027f62 00020010
nouveau 0000:01:00.0: DRM: DCB outp 13: 02049f00 00000000
nouveau 0000:01:00.0: DRM: DCB conn 00: 08000040
nouveau 0000:01:00.0: DRM: DCB conn 04: 01000446
nouveau 0000:01:00.0: DRM: DCB conn 05: 02000546
nouveau 0000:01:00.0: DRM: DCB conn 07: 00010746
nouveau 0000:01:00.0: DRM: DCB conn 08: 00020847
nouveau 0000:01:00.0: DRM: DCB conn 09: 00000900
nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
usb 1-10: new full-speed USB device number 4 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2711.970 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x271769d4601, max_idle_ns: 440795256941 ns
clocksource: Switched to clocksource tsc
ata4: SATA link down (SStatus 4 SControl 300)
nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
nouveau 0000:01:00.0: DRM: Disabling PCI power management to avoid bug
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5832, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
usb 1-10: config 0 descriptor??
usb 1-11: new high-speed USB device number 5 using xhci_hcd
input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input7
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
ata5: SATA link down (SStatus 4 SControl 300)
usb 1-11: New USB device found, idVendor=1bcf, idProduct=2b91, bcdDevice=57.27
usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-11: Product: Integrated_Webcam_HD
usb 1-11: Manufacturer: CNFEH63M22501789D4C2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver usbmouse
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:093A:2510.0001/input/input8
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1/input0
[drm] Initialized i915 1.6.0 20200313 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input10
vga_switcheroo: enabled
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
raid6: avx2x4 gen() 37081 MB/s
raid6: avx2x4 xor() 17469 MB/s
raid6: avx2x2 gen() 38260 MB/s
raid6: avx2x2 xor() 22746 MB/s
raid6: avx2x1 gen() 32661 MB/s
raid6: avx2x1 xor() 17499 MB/s
raid6: sse2x4 gen() 16068 MB/s
raid6: sse2x4 xor() 8851 MB/s
raid6: sse2x2 gen() 16287 MB/s
raid6: sse2x2 xor() 9931 MB/s
raid6: sse2x1 gen() 13783 MB/s
raid6: sse2x1 xor() 7027 MB/s
raid6: using algorithm avx2x2 gen() 38260 MB/s
raid6: .... xor() 22746 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
process '/usr/bin/fstype' started with executable stack
PM: Image not found (code -22)
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
partition count: 1, comm[1]: init, path: /usr/lib/systemd/systemd, cmdline: (null)
[hook_mmap_file] command: init, device(2), mount(2), elf enabled: 1
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Configuration file /lib/systemd/system/test.service is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: Configuration file /lib/systemd/system/test.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway.
systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
systemd[1]: Configuration file /lib/systemd/system/license.service is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: Configuration file /lib/systemd/system/deepin-elf-verify.service is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: Listening on initctl Compatibility Named Pipe.
ashmem_linux: loading out-of-tree module taints kernel.
ashmem_linux: module verification failed: signature and/or required key missing - tainting kernel
module loaded
Planted kprobe for symbol kallsyms_lookup_name at 0000000024f4e4a0
Planted kprobe for symbol kallsyms_lookup_name at 0000000024f4e4a0
EXT4-fs (nvme0n1p3): re-mounted. Opts: (null)
kallsyms_lookup_name address = 0xffffffff96b5ca60
binder init
module loaded
Planted kprobe for symbol kallsyms_lookup_name at 0000000024f4e4a0
Planted kprobe for symbol kallsyms_lookup_name at 0000000024f4e4a0
kallsyms_lookup_name address = 0xffffffff96b5ca60
mp: /, major: 3, minor: 3
partition count: 1, comm[487]: systemd-modules, path: /usr/lib/systemd/systemd-modules-load, cmdline: /lib/systemd/systemd-modules-load
register_kretprobes 10 ok
input: DELL Wireless hotkeys as /devices/virtual/input/input11
parport_pc 00:06: [io 0x0378-0x037b]
parport_pc 00:06: [irq 5]
parport_pc 00:06: activated
parport_pc 00:06: reported by Plug and Play ACPI
iTCO_vendor_support: vendor-support=0
pstore: Using crash dump compression: deflate
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
pstore: Registered efi as persistent store backend
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain dram
proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM
iwlwifi 0000:02:00.0: Found debug configuration: 0
iwlwifi 0000:02:00.0: loaded firmware version 36.77d01142.0 8000C-36.ucode op_mode iwlmvm
iwlwifi 0000:02:00.0: Direct firmware load for iwl-debug-yoyo.bin failed with error -2
input: PC Speaker as /devices/platform/pcspkr/input/input12
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
Error: Driver 'pcspkr' is already registered, aborting...
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
input: Dell WMI hotkeys as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input13
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
cryptd: max_cpu_qlen set to 1000
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor.
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
iwlwifi 0000:02:00.0: base HW address: e4:a4:71:31:ff:5b
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3235: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x1a
snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x13
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone10: failed to read out thermal zone (-61)
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
intel_rapl_common: RAPL package-0 domain package locked by BIOS
intel_rapl_common: RAPL package-0 domain dram locked by BIOS
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
ppdev: user-space parallel port driver
iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
dell_laptop: Using i8042 filter function for receiving events
mc: Linux media interface: v0.10
Adding 16777212k swap on /dev/nvme0n1p7. Priority:-2 extents:1 across:16777212k SSFS
videodev: Linux video capture interface: v2.00
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
Bluetooth: hci0: Device revision is 5
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
partition /boot [3, 2] added, comm[892]: mount
EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Opts: (null)
partition /recovery [3, 6] added, comm[897]: mount
uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:2b91)
EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
partition /data [3, 5] added, comm[901]: mount
partition /home [3, 5] added, comm[925]: mount
partition /var [3, 5] added, comm[926]: mount
[is_in_developer_mode] developer file: '1', size: 1
[skip_elf_verify] is in developer mode
[is_in_developer_mode] developer file: '1', size: 1
[skip_elf_verify] is in developer mode
partition /opt [3, 5] added, comm[928]: mount
partition /root [3, 5] added, comm[929]: mount
systemd-journald[495]: Received request to flush runtime journal from PID 1
partition /boot/efi [3, 1] added, comm[906]: mount
uvcvideo 1-11:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-11:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-11:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-11:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input29
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1366177 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 10714 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
Bluetooth: hci0: Firmware revision 0.0 build 10 week 41 2018
st: Version 20160209, fixed bufsize 32768, s/g segs 256
iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
deepin-devlicen[2195]: segfault at a ip 00007f0544c022f1 sp 00007ffc1f923c78 error 4 in libc-2.28.so[7f0544ac8000+148000]
Code: 84 00 00 00 00 00 0f 1f 00 31 c0 c5 f8 77 c3 66 2e 0f 1f 84 00 00 00 00 00 89 f9 48 89 fa c5 f9 ef c0 83 e1 3f 83 f9 20 77 1f fd 74 0f c5 fd d7 c1 85 c0 0f 85 df 00 00 00 48 83 c7 20 83 e1
partition /data/uengine/data/rootfs [7, 0] added, comm[3044]: uengine
on_do_mount_ent no type
on_do_mount_ent no type
broken atomic modeset userspace detected, disabling atomic
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
uengine0: port 1(veth84VSAW) entered blocking state
uengine0: port 1(veth84VSAW) entered disabled state
device veth84VSAW entered promiscuous mode
uengine0: port 1(veth84VSAW) entered blocking state
uengine0: port 1(veth84VSAW) entered forwarding state
cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
eth0: renamed from veth35RT5H
IPv6: ADDRCONF(NETDEV_CHANGE): veth84VSAW: link becomes ready
init: init first stage started!
init: init second stage started!
init: Running restorecon...
init: waitpid failed: No child processes
init: (Loading properties from /default.prop took 0.00s.)
init: (Parsing /init.environ.rc took 0.00s.)
init: (Parsing /init.usb.rc took 0.00s.)
init: (Parsing /init.goldfish.rc took 0.00s.)
init: (Parsing /init.zygote64_32.rc took 0.00s.)
init: (Parsing /init.rc took 0.00s.)
init: write_file: Unable to open '/proc/sys/kernel/sysrq': Read-only file system
ueventd: ueventd started!
ueventd: Coldboot took 0.00s.
cgroup: Unknown subsys name 'schedtune'
new mount options do not match the existing superblock, will be ignored
fs_mgr: No entries found in fstab
healthd: wakealarm_init: timerfd_create failed
healthd: BatteryHealthPath not found
healthd: BatteryTemperaturePath not found
healthd: battery l=42 v=12414 t=42.4 h=1 st=5 c=1 fc=5535000 cc=0 chg=a
capability: warning: `main' uses 32-bit capabilities (legacy support in use)
init: Service 'cameraserver' (pid 44) killed by signal 15
init: Service 'cameraserver' (pid 44) killing any children in process group
init: Starting service 'cameraserver'...
init: couldn't write 179 to /dev/cpuset/camera-daemon/tasks: No such file or directory
init: Service 'cameraserver' (pid 179) killed by signal 15
on_do_mount_ent no type
init: Service 'cameraserver' (pid 179) killing any children in process group
on_do_mount_ent no type
healthd: battery l=42 v=12414 t=42.4 h=1 st=5 c=1 fc=5535000 cc=0 chg=a
init: write_file: Unable to open '/proc/sys/vm/extra_free_kbytes': No such file or directory
bpfilter: Loaded bpfilter_umh pid 5705
Started bpfilter
init: Starting service 'cameraserver'...
init: couldn't write 472 to /dev/cpuset/camera-daemon/tasks: No such file or directory
perf: interrupt took too long (2526 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3185 > 3157), lowering kernel.perf_event_max_sample_rate to 62750
usb 2-5: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-5: New USB device found, idVendor=13fe, idProduct=6300, bcdDevice= 1.00
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-5: Product: USB DISK 3.0
usb 2-5: Manufacturer:
usb 2-5: SerialNumber: 07002B4987020C76
usb-storage 2-5:1.0: USB Mass Storage device detected
scsi host5: usb-storage 2-5:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 5:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: [sda] 122880000 512-byte logical blocks: (62.9 GB/58.6 GiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 5:0:0:0: [sda] No Caching mode page found
sd 5:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2
sd 5:0:0:0: [sda] Attached SCSI removable disk
This is the fuse filesytem，so return
This is the fuse filesytem，so return
sys_umount: /media/uos/D611-C70E, 8, 1
sys_umount: /media/uos/EFI, 8, 2
sd 5:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE cmd_age=0s
sd 5:0:0:0: [sda] tag#0 Sense Key : Hardware Error [current]
sd 5:0:0:0: [sda] tag#0 Add. Sense: No additional sense information
sd 5:0:0:0: [sda] tag#0 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
usb 2-5: USB disconnect, device number 2
perf: interrupt took too long (3997 > 3981), lowering kernel.perf_event_max_sample_rate to 50000