dmesg - fio-firrst
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-1160.el7.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-44) (GCC) ) #1 SMP Mon Oct 19 16:18:59 UTC 2020
Command line: BOOT_IMAGE=/vmlinuz-3.10.0-1160.el7.x86_64 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=en_US.UTF-8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c17effff] usable
BIOS-e820: [mem 0x00000000c17f0000-0x00000000c17fffff] ACPI data
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Hypervisor detected: KVM
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0xc17f0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR variable ranges disabled:
PAT configuration [0-7]: WB WC UC- UC WB WP UC- UC
CPU MTRRs all blank - virtualized system.
found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffffffffff200ff0]
Base memory trampoline at [ffffa10200099000] 99000 size 24576
BRK [0x15674000, 0x15674fff] PGTABLE
BRK [0x15675000, 0x15675fff] PGTABLE
BRK [0x15676000, 0x15676fff] PGTABLE
BRK [0x15677000, 0x15677fff] PGTABLE
BRK [0x15678000, 0x15678fff] PGTABLE
BRK [0x15679000, 0x15679fff] PGTABLE
BRK [0x1567a000, 0x1567afff] PGTABLE
RAMDISK: [mem 0x343e7000-0x361ebfff]
Early table checksum verification disabled
ACPI: RSDP 00000000000e0000 00024 (v02 VBOX )
ACPI: XSDT 00000000c17f0030 0003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 00000000c17f00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 00000000c17f0470 02325 (v02 VBOX VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 00000000c17f0200 00040
ACPI: APIC 00000000c17f0240 00054 (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI: SSDT 00000000c17f02a0 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000000c17effff]
NODE_DATA(0) allocated [mem 0xc17c9000-0xc17effff]
Reserving 161MB of memory at 672MB for crashkernel (System RAM: 3095MB)
kvm-clock: cpu 0, msr 0:c1778001, primary cpu clock
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: using sched offset of 18880370858 cycles
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xc17effff]
Initmem setup node 0 [mem 0x00001000-0xc17effff]
On node 0 totalpages: 792462
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12320 pages used for memmap
DMA32 zone: 788464 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0xc1800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on KVM
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
percpu: Embedded 38 pages/cpu s118784 r8192 d28672 u2097152
pcpu-alloc: s118784 r8192 d28672 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists in Node order, mobility grouping on. Total pages: 780057
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-1160.el7.x86_64 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=en_US.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 2013200k/3170240k available (7788k kernel code, 392k absent, 266728k reserved, 5954k data, 1984k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
x86/pti: Unmapping kernel while in userspace
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=1.
NR_IRQS:327936 nr_irqs:256 0
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 85196800 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Detected 3292.372 MHz processor
Calibrating delay loop (skipped) preset value.. 6584.74 BogoMIPS (lpj=3292372)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys net_prio
mce: Detected Haswell CPU. MCE quirk HSD131, HSM142, HSW131, BDM48, or HSM142 enabled.
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
FEATURE SPEC_CTRL Not Present
FEATURE IBPB_SUPPORT Not Present
Spectre V1 : Mitigation: Load fences, usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Vulnerable: Retpoline without IBPB
Speculative Store Bypass: Vulnerable
SRBDS: Unknown: Dependent on hypervisor status
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 29651 entries in 116 pages
Enabling x2apic
Enabled x2apic
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (fam: 06, model: 3c, stepping: 03)
Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
KVM setup paravirtual spinlock
Brought up 1 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 1 processors activated (6584.74 BogoMIPS)
node 0 initialised, 222480 pages in 20ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
EVM: security.selinux
EVM: security.ima
EVM: security.capability
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 18:33:21, date: 04/09/21
NET: Registered protocol family 16
cpuidle: using governor haltpoll
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 07
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc1800000-0xfdffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:02.0: [15ad:0405] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [io 0xd010-0xd01f]
pci 0000:00:02.0: reg 0x14: [mem 0xf0000000-0xf0ffffff pref]
pci 0000:00:02.0: reg 0x18: [mem 0xf1000000-0xf11fffff]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xf1200000-0xf121ffff]
pci 0000:00:03.0: reg 0x18: [io 0xd020-0xd027]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [io 0xd040-0xd05f]
pci 0000:00:04.0: reg 0x14: [mem 0xf1400000-0xf17fffff]
pci 0000:00:04.0: reg 0x18: [mem 0xf1800000-0xf1803fff pref]
pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
pci 0000:00:06.0: reg 0x10: [mem 0xf1804000-0xf1804fff]
pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB
pci 0000:00:0b.0: [8086:265c] type 00 class 0x0c0320
pci 0000:00:0b.0: reg 0x10: [mem 0xf1805000-0xf1805fff]
pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247]
pci 0000:00:0d.0: reg 0x14: [io 0xd248-0xd24b]
pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257]
pci 0000:00:0d.0: reg 0x1c: [io 0xd258-0xd25b]
pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f]
pci 0000:00:0d.0: reg 0x24: [mem 0xf1806000-0xf1807fff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xc17f0000-0xc3ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
amd_nb: Cannot enumerate AMD northbridges
Switched to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp: PnP ACPI: found 2 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc1800000-0xfdffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 30740k freed
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 10737418240 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-0 Joules
RAPL PMU: hw unit of domain package 2^-0 Joules
RAPL PMU: hw unit of domain dram 2^-0 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-0 Joules
platform rtc_cmos: registered platform RTC device (no PNP device found)
sha1_ssse3: Using AVX optimized SHA-1 implementation
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 256 (order: 2, 16384 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1617993222.670:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:0b.0: EHCI Host Controller
ehci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:0b.0: irq 19, io mem 0xf1805000
ehci-pci 0000:00:0b.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-1160.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:06.0: OHCI PCI host controller
ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:06.0: irq 22, io mem 0xf1804000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 3.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.10.0-1160.el7.x86_64 ohci_hcd
usb usb2: SerialNumber: 0000:00:06.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 12 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
random: fast init done
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
mce: Using 0 MCE banks
PM: Hibernation image not present or could not be loaded.
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: e1fdb0e2a7e861a1d1ca80a23dcf0dba3aa4adf5'
registered taskstats version 1
page_owner is disabled
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass! (rc=-19)
BERT: Boot Error Record Table support is disabled. Enable it by using bert_enable as kernel parameter.
Magic number: 1:602:594
rtc_cmos rtc_cmos: setting system clock to 2021-04-09 18:33:23 UTC (1617993203)
Freeing unused kernel memory: 1984k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 392k freed
Freeing unused kernel memory: 536k freed
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected virtualization kvm.
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Created slice Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Journal Service...
systemd[1]: Reached target Swap.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Reached target Timers.
systemd[1]: Reached target Local File Systems.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
fuse init (API version 7.23)
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.1-ioctl (2018-04-03) initialised: dm-devel@redhat.com
tsc: Refined TSC clocksource calibration: 3290.678 MHz
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
libata version 3.00 loaded.
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:db:bb:7a
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
ahci 0000:00:0d.0: version 3.0
ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
scsi host2: ahci
ata3: SATA max UDMA/133 abar m8192@0xf1806000 port 0xf1806100 irq 21
[drm] DMA map mode: Keeping DMA mappings.
[drm] Capabilities:
[drm] Cursor.
[drm] Cursor bypass 2.
[drm] Alpha cursor.
[drm] 3D.
[drm] Extended Fifo.
[drm] Pitchlock.
[drm] Irq mask.
[drm] GMR.
[drm] Traces.
[drm] GMR2.
[drm] Screen Object 2.
[drm] Max GMR ids is 8192
[drm] Max number of GMR pages is 1048576
[drm] Max dedicated hypervisor surface memory is 507904 kiB
[drm] Maximum display memory size is 16384 kiB
[drm] VRAM at 0xf0000000 size is 16384 kiB
[drm] MMIO at 0xf1000000 size is 2048 kiB
[TTM] Zone kernel: Available graphics memory: 1468400 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
[drm] Screen Objects Display Unit initialized
[drm] width 720
[drm] height 400
[drm] bpp 32
[drm] Fifo max 0x00200000 min 0x00001000 cap 0x00000355
[drm] DX: no.
[drm] Atomic: yes.
[drm] SM4_1: no.
[drm:vmw_host_log [vmwgfx]] *ERROR* Failed to send host log message.
[drm:vmw_host_log [vmwgfx]] *ERROR* Failed to send host log message.
fbcon: svgadrmfb (fb0) is primary device
Console: switching to colour frame buffer device 100x37
[drm] Initialized vmwgfx 2.15.0 20180704 for 0000:00:02.0 on minor 0
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata3.00: 209715200 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: [sda] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
SGI XFS with ACLs, security attributes, no debug enabled
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Ending clean mount
systemd-journald[92]: Received SIGTERM from PID 1 (systemd).
type=1404 audit(1617993206.867:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 112812 rules.
SELinux: 2048 avtab hash slots, 112812 rules.
SELinux: 8 users, 14 roles, 5046 types, 316 bools, 1 sens, 1024 cats
SELinux: 130 classes, 112812 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
type=1403 audit(1617993207.027:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 166.041ms.
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 37.743ms.
random: crng init done
systemd-journald[486]: Received request to flush runtime journal from PID 1
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input4
vboxguest: loading out-of-tree module taints kernel.
vboxguest: module verification failed: signature and/or required key missing - tainting kernel
vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input5
vboxguest: Successfully loaded version 6.1.12
vboxguest: misc device minor 58, IRQ 20, I/O port d040, MMIO at 00000000f1400000 (size 0x400000)
vboxguest: Successfully loaded version 6.1.12 (interface 0x00010004)
input: PC Speaker as /devices/platform/pcspkr/input/input6
sr 1:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
cryptd: max_cpu_qlen set to 1000
XFS (sda1): Mounting V5 Filesystem
Adding 3145724k swap on /dev/mapper/centos-swap. Priority:-2 extents:1 across:3145724k FS
XFS (sda1): Ending clean mount
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ppdev: user-space parallel port driver
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for __generic-gcm-aes-aesni (__driver-generic-gcm-aes-aesni)
XFS (dm-2): Mounting V5 Filesystem
snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
XFS (dm-2): Ending clean mount
floppy0: no floppy controllers found
work still pending
type=1305 audit(1617993212.605:4): audit_pid=806 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
Netfilter messages via NETLINK v0.30.
ip_set: protocol 7
IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
SELinux: 2048 avtab hash slots, 112812 rules.
SELinux: 2048 avtab hash slots, 112812 rules.
SELinux: 8 users, 14 roles, 5046 types, 316 bools, 1 sens, 1024 cats
SELinux: 130 classes, 112812 rules
SELinux: Converting 1444 SID table entries...
SELinux: 2048 avtab hash slots, 112812 rules.
SELinux: 2048 avtab hash slots, 112812 rules.
SELinux: 8 users, 14 roles, 5046 types, 316 bools, 1 sens, 1024 cats
SELinux: 130 classes, 112812 rules
SELinux: Converting 1444 SID table entries...
18:34:16.539903 main VBoxService 6.1.12 r139181 (verbosity: 0) linux.amd64 (Jul 10 2020 23:13:42) release log
18:34:16.539908 main Log opened 2021-04-09T18:34:16.539878000Z
18:34:16.540066 main OS Product: Linux
18:34:16.540102 main OS Release: 3.10.0-1160.el7.x86_64
18:34:16.540132 main OS Version: #1 SMP Mon Oct 19 16:18:59 UTC 2020
18:34:16.540175 main Executable: /opt/VBoxGuestAdditions-6.1.12/sbin/VBoxService
18:34:16.540176 main Process ID: 2088
18:34:16.540178 main Package type: LINUX_64BITS_GENERIC
18:34:16.549769 main 6.1.12 r139181 started. Verbose level = 0
18:34:16.577773 main vbglR3GuestCtrlDetectPeekGetCancelSupport: Supported (#1)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
TCP: lp registered
e1000: enp0s3 NIC Link is Down
e1000 0000:00:03.0 enp0s3: Reset adapter
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
hrtimer: interrupt took 2804536 ns
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX