dmesg - dc1366x768
Linux version 5.3.0-64-generic (buildd@lcy01-amd64-026) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #58-Ubuntu SMP Fri Jul 10 19:33:51 UTC 2020 (Ubuntu 5.3.0-64.58-generic 5.3.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000086fff] usable
BIOS-e820: [mem 0x0000000000087000-0x0000000000087fff] reserved
BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009afffff] usable
BIOS-e820: [mem 0x0000000009b00000-0x0000000009dfffff] reserved
BIOS-e820: [mem 0x0000000009e00000-0x0000000009efffff] usable
BIOS-e820: [mem 0x0000000009f00000-0x0000000009f09fff] ACPI NVS
BIOS-e820: [mem 0x0000000009f0a000-0x00000000842a9fff] usable
BIOS-e820: [mem 0x00000000842aa000-0x0000000084ba9fff] reserved
BIOS-e820: [mem 0x0000000084baa000-0x000000008b5befff] usable
BIOS-e820: [mem 0x000000008b5bf000-0x000000008d7befff] reserved
BIOS-e820: [mem 0x000000008d7bf000-0x000000008f7befff] ACPI NVS
BIOS-e820: [mem 0x000000008f7bf000-0x000000008f7fefff] ACPI data
BIOS-e820: [mem 0x000000008f7ff000-0x000000008f7fffff] usable
BIOS-e820: [mem 0x000000008f800000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000fff4ffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022f33ffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x82636018-0x82643457] usable ==> usable
e820: update [mem 0x82636018-0x82643457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000086fff] usable
reserve setup_data: [mem 0x0000000000087000-0x0000000000087fff] reserved
reserve setup_data: [mem 0x0000000000088000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000bffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009afffff] usable
reserve setup_data: [mem 0x0000000009b00000-0x0000000009dfffff] reserved
reserve setup_data: [mem 0x0000000009e00000-0x0000000009efffff] usable
reserve setup_data: [mem 0x0000000009f00000-0x0000000009f09fff] ACPI NVS
reserve setup_data: [mem 0x0000000009f0a000-0x0000000082636017] usable
reserve setup_data: [mem 0x0000000082636018-0x0000000082643457] usable
reserve setup_data: [mem 0x0000000082643458-0x00000000842a9fff] usable
reserve setup_data: [mem 0x00000000842aa000-0x0000000084ba9fff] reserved
reserve setup_data: [mem 0x0000000084baa000-0x000000008b5befff] usable
reserve setup_data: [mem 0x000000008b5bf000-0x000000008d7befff] reserved
reserve setup_data: [mem 0x000000008d7bf000-0x000000008f7befff] ACPI NVS
reserve setup_data: [mem 0x000000008f7bf000-0x000000008f7fefff] ACPI data
reserve setup_data: [mem 0x000000008f7ff000-0x000000008f7fffff] usable
reserve setup_data: [mem 0x000000008f800000-0x00000000cfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff800000-0x00000000fff4ffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000022f33ffff] usable
efi: EFI v2.60 by INSYDE Corp.
efi: ACPI 2.0=0x8f7fe014 ESRT=0x8c4e9018 SMBIOS=0x8c4e7000 SMBIOS 3.0=0x8c4e5000 TPMFinalLog=0x8d6e0000 MEMATTR=0x89370018 TPMEventLog=0x84bb9018
secureboot: Secure boot disabled
SMBIOS 3.1.1 present.
DMI: Acer Aspire A315-41/Metapod_RR, BIOS V1.18 06/18/2020
tsc: Fast TSC calibration using PIT
tsc: Detected 1996.134 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x22f340 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-through
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000FF800000 mask FFFFFF800000 write-protect
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000230000000 aka 8960M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x8f800 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000008c4e9018 to 0x000000008c4e9050.
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
RAMDISK: [mem 0x3aca7000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008F7FE014 000024 (v02 ACRSYS)
ACPI: XSDT 0x000000008F7CA188 0000EC (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 0x000000008F7F3000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DSDT 0x000000008F7E7000 006806 (v01 ACRSYS ACRPRDCT 00040000 1025 00040000)
ACPI: FACS 0x000000008F3A2000 000040
ACPI: UEFI 0x000000008F7FD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000008F7F7000 005419 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
ACPI: MSDM 0x000000008F7F6000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASF! 0x000000008F7F5000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: BOOT 0x000000008F7F4000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: HPET 0x000000008F7F2000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC 0x000000008F7F1000 000138 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG 0x000000008F7F0000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: WSMT 0x000000008F7EE000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000008F7E5000 00119C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: CRAT 0x000000008F7E4000 000810 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: CDIT 0x000000008F7E3000 000029 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: UEFI 0x000000008F7E2000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: SSDT 0x000000008F7DC000 005536 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: VFCT 0x000000008F7CE000 00D484 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000008F7EF000 00046D (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: TPM2 0x000000008F7CD000 000034 (v04 ACRSYS ACRPRDCT 00000002 1025 00040000)
ACPI: IVRS 0x000000008F7CC000 0000D0 (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000008F7CB000 0001D4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000008F7C9000 000C33 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000008F7C7000 0010F5 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000008F7C5000 001B4E (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: FPDT 0x000000008F7C4000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
ACPI: BGRT 0x000000008F7C3000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022f33ffff]
NODE_DATA(0) allocated [mem 0x22f315000-0x22f33ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000022f33ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000086fff]
node 0: [mem 0x0000000000088000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009afffff]
node 0: [mem 0x0000000009e00000-0x0000000009efffff]
node 0: [mem 0x0000000009f0a000-0x00000000842a9fff]
node 0: [mem 0x0000000084baa000-0x000000008b5befff]
node 0: [mem 0x000000008f7ff000-0x000000008f7fffff]
node 0: [mem 0x0000000100000000-0x000000022f33ffff]
Zeroed struct page in unavailable ranges: 25452 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000022f33ffff]
On node 0 totalpages: 1809556
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8807 pages used for memmap
DMA32 zone: 563638 pages, LIFO batch:63
Normal zone: 19405 pages used for memmap
Normal zone: 1241920 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
Using ACPI for processor (LAPIC) configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
e820: update [mem 0x88d78000-0x88df2fff] usable ==> reserved
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00087000-0x00087fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09b00000-0x09dfffff]
PM: Registered nosave memory: [mem 0x09f00000-0x09f09fff]
PM: Registered nosave memory: [mem 0x82636000-0x82636fff]
PM: Registered nosave memory: [mem 0x82643000-0x82643fff]
PM: Registered nosave memory: [mem 0x842aa000-0x84ba9fff]
PM: Registered nosave memory: [mem 0x88d78000-0x88df2fff]
PM: Registered nosave memory: [mem 0x8b5bf000-0x8d7befff]
PM: Registered nosave memory: [mem 0x8d7bf000-0x8f7befff]
PM: Registered nosave memory: [mem 0x8f7bf000-0x8f7fefff]
PM: Registered nosave memory: [mem 0x8f800000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xfff4ffff]
PM: Registered nosave memory: [mem 0xfff50000-0xffffffff]
[mem 0xd0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 1781258
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 6882404K/7238224K available (14339K kernel code, 2387K rwdata, 4732K rodata, 2680K init, 5040K bss, 355820K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 43632 entries in 171 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 272, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190703
ACPI: setting ELCR to 0200 (from 0000)
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
AMD-Vi: [Firmware Bug]: : No southbridge IOAPIC found
AMD-Vi: Disabling interrupt remapping
Switched APIC routing to physical flat.
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x398bd529e78, max_idle_ns: 881590816213 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.26 BogoMIPS (lpj=7984536)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Vulnerable
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx (family: 0x17, model: 0x11, stepping: 0x0)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 8 processors activated (31938.14 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x09f00000-0x09f09fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0x8d7bf000-0x8f7befff] (33554432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 15:52:00, date: 2021-03-14
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1615737119.144:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: 9 ACPI AML tables successfully acquired and loaded
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: Power Resource [P0ST] (on)
ACPI: Power Resource [P3ST] (on)
PCI: setting IRQ 7 as level-triggered
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Probing PCI hardware
PCI: root bus 00: using default resources
PCI: Probing PCI hardware (bus 00)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0x7ffffffffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.6: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.6: enabling Extended Tags
pci 0000:00:01.6: PME# supported from D0 D3hot D3cold
pci 0000:00:01.7: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.7: enabling Extended Tags
pci 0000:00:01.7: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
pci 0000:01:00.0: [10ec:5287] type 00 class 0xff0000
pci 0000:01:00.0: reg 0x10: [mem 0xe0905000-0xe0905fff]
pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.1: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.1: reg 0x10: [io 0x2000-0x20ff]
pci 0000:01:00.1: reg 0x18: [mem 0xe0904000-0xe0904fff 64bit]
pci 0000:01:00.1: reg 0x20: [mem 0xe0900000-0xe0903fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.6: PCI bridge to [bus 01]
pci 0000:00:01.6: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.6: bridge window [mem 0xe0900000-0xe09fffff]
pci 0000:02:00.0: [168c:0042] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xe0200000-0xe03fffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.7: PCI bridge to [bus 02]
pci 0000:00:01.7: bridge window [mem 0xe0200000-0xe03fffff]
pci 0000:03:00.0: [1002:15dd] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [io 0x1000-0x10ff]
pci 0000:03:00.0: reg 0x24: [mem 0xe0800000-0xe087ffff]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: BAR 0: assigned to efifb
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:03:00.1: [1002:15de] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xe0888000-0xe088bfff]
pci 0000:03:00.1: enabling Extended Tags
pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.2: [1022:15df] type 00 class 0x108000
pci 0000:03:00.2: reg 0x18: [mem 0xe0700000-0xe07fffff]
pci 0000:03:00.2: reg 0x24: [mem 0xe088c000-0xe088dfff]
pci 0000:03:00.2: enabling Extended Tags
pci 0000:03:00.3: [1022:15e0] type 00 class 0x0c0330
pci 0000:03:00.3: reg 0x10: [mem 0xe0600000-0xe06fffff 64bit]
pci 0000:03:00.3: enabling Extended Tags
pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
pci 0000:03:00.4: [1022:15e1] type 00 class 0x0c0330
pci 0000:03:00.4: reg 0x10: [mem 0xe0500000-0xe05fffff 64bit]
pci 0000:03:00.4: enabling Extended Tags
pci 0000:03:00.4: PME# supported from D0 D3hot D3cold
pci 0000:03:00.6: [1022:15e3] type 00 class 0x040300
pci 0000:03:00.6: reg 0x10: [mem 0xe0880000-0xe0887fff]
pci 0000:03:00.6: enabling Extended Tags
pci 0000:03:00.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 03]
pci 0000:00:08.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:08.1: bridge window [mem 0xe0500000-0xe08fffff]
pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:04:00.0: [1022:7901] type 00 class 0x010601
pci 0000:04:00.0: reg 0x24: [mem 0xe0400000-0xe04007ff]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 04]
pci 0000:00:08.2: bridge window [mem 0xe0400000-0xe04fffff]
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 04
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:01.6: can't claim BAR 13 [io 0x2000-0x2fff]: address conflict with PNP0A08:00 [io 0x0d00-0xffff window]
pci 0000:00:01.6: can't claim BAR 14 [mem 0xe0900000-0xe09fffff]: address conflict with PNP0A08:00 [mem 0xd0000000-0xf7ffffff window]
pci 0000:00:01.7: can't claim BAR 14 [mem 0xe0200000-0xe03fffff]: address conflict with PNP0A08:00 [mem 0xd0000000-0xf7ffffff window]
pci 0000:00:08.1: can't claim BAR 13 [io 0x1000-0x1fff]: address conflict with PNP0A08:00 [io 0x0d00-0xffff window]
pci 0000:00:08.1: can't claim BAR 14 [mem 0xe0500000-0xe08fffff]: address conflict with PNP0A08:00 [mem 0xd0000000-0xf7ffffff window]
pci 0000:00:08.1: can't claim BAR 15 [mem 0xd0000000-0xe01fffff 64bit pref]: address conflict with PNP0A08:00 [mem 0xd0000000-0xf7ffffff window]
pci 0000:00:08.2: can't claim BAR 14 [mem 0xe0400000-0xe04fffff]: address conflict with PNP0A08:00 [mem 0xd0000000-0xf7ffffff window]
pci 0000:01:00.0: can't claim BAR 0 [mem 0xe0905000-0xe0905fff]: no compatible bridge window
pci 0000:01:00.1: can't claim BAR 0 [io 0x2000-0x20ff]: no compatible bridge window
pci 0000:01:00.1: can't claim BAR 2 [mem 0xe0904000-0xe0904fff 64bit]: no compatible bridge window
pci 0000:01:00.1: can't claim BAR 4 [mem 0xe0900000-0xe0903fff 64bit]: no compatible bridge window
pci 0000:02:00.0: can't claim BAR 0 [mem 0xe0200000-0xe03fffff 64bit]: no compatible bridge window
pci 0000:03:00.0: can't claim BAR 0 [mem 0xd0000000-0xdfffffff 64bit pref]: no compatible bridge window
pci 0000:03:00.0: can't claim BAR 2 [mem 0xe0000000-0xe01fffff 64bit pref]: no compatible bridge window
pci 0000:03:00.0: can't claim BAR 4 [io 0x1000-0x10ff]: no compatible bridge window
pci 0000:03:00.0: can't claim BAR 5 [mem 0xe0800000-0xe087ffff]: no compatible bridge window
pci 0000:03:00.1: can't claim BAR 0 [mem 0xe0888000-0xe088bfff]: no compatible bridge window
pci 0000:03:00.2: can't claim BAR 2 [mem 0xe0700000-0xe07fffff]: no compatible bridge window
pci 0000:03:00.2: can't claim BAR 5 [mem 0xe088c000-0xe088dfff]: no compatible bridge window
pci 0000:03:00.3: can't claim BAR 0 [mem 0xe0600000-0xe06fffff 64bit]: no compatible bridge window
pci 0000:03:00.4: can't claim BAR 0 [mem 0xe0500000-0xe05fffff 64bit]: no compatible bridge window
pci 0000:03:00.6: can't claim BAR 0 [mem 0xe0880000-0xe0887fff]: no compatible bridge window
pci 0000:04:00.0: can't claim BAR 5 [mem 0xe0400000-0xe04007ff]: no compatible bridge window
e820: reserve RAM buffer [mem 0x00087000-0x0008ffff]
e820: reserve RAM buffer [mem 0x09b00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x09f00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x82636018-0x83ffffff]
e820: reserve RAM buffer [mem 0x842aa000-0x87ffffff]
e820: reserve RAM buffer [mem 0x88d78000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8b5bf000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8f800000-0x8fffffff]
e820: reserve RAM buffer [mem 0x22f340000-0x22fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfd300000-0xfd3fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs FUJ7401 PNP0303 (active)
system 00:03: [io 0x0400-0x04cf] has been reserved
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cdb] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:04: [mem 0xff800000-0xffffffff] could not be reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 5 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:08.1: BAR 15: assigned [mem 0x230000000-0x247ffffff 64bit pref]
pci 0000:00:01.7: BAR 14: assigned [mem 0xff000000-0xff1fffff]
pci 0000:00:01.6: BAR 14: assigned [mem 0xfef00000-0xfeffffff]
pci 0000:00:08.1: BAR 14: assigned [mem 0xff200000-0xff5fffff]
pci 0000:00:08.2: BAR 14: assigned [mem 0xff600000-0xff6fffff]
pci 0000:00:01.6: BAR 13: no space for [io size 0x1000]
pci 0000:00:01.6: BAR 13: failed to assign [io size 0x1000]
pci 0000:00:08.1: BAR 13: no space for [io size 0x1000]
pci 0000:00:08.1: BAR 13: failed to assign [io size 0x1000]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfef00000-0xfef0ffff pref]
pci 0000:01:00.1: BAR 4: assigned [mem 0xfef10000-0xfef13fff 64bit]
pci 0000:01:00.0: BAR 0: assigned [mem 0xfef14000-0xfef14fff]
pci 0000:01:00.1: BAR 2: assigned [mem 0xfef15000-0xfef15fff 64bit]
pci 0000:01:00.1: BAR 0: no space for [io size 0x0100]
pci 0000:01:00.1: BAR 0: trying firmware assignment [io 0x2000-0x20ff]
pci 0000:01:00.1: BAR 0: [io 0x2000-0x20ff] conflicts with PNP0A08:00 [io 0x0d00-0xffff window]
pci 0000:01:00.1: BAR 0: failed to assign [io size 0x0100]
pci 0000:00:01.6: PCI bridge to [bus 01]
pci 0000:00:01.6: bridge window [mem 0xfef00000-0xfeffffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0xff000000-0xff1fffff 64bit]
pci 0000:00:01.7: PCI bridge to [bus 02]
pci 0000:00:01.7: bridge window [mem 0xff000000-0xff1fffff]
pci 0000:03:00.0: BAR 0: assigned [mem 0x230000000-0x23fffffff 64bit pref]
pci 0000:03:00.0: BAR 2: assigned [mem 0x240000000-0x2401fffff 64bit pref]
pci 0000:03:00.2: BAR 2: assigned [mem 0xff200000-0xff2fffff]
pci 0000:03:00.3: BAR 0: assigned [mem 0xff300000-0xff3fffff 64bit]
pci 0000:03:00.4: BAR 0: assigned [mem 0xff400000-0xff4fffff 64bit]
pci 0000:03:00.0: BAR 5: assigned [mem 0xff500000-0xff57ffff]
pci 0000:03:00.6: BAR 0: assigned [mem 0xff580000-0xff587fff]
pci 0000:03:00.1: BAR 0: assigned [mem 0xff588000-0xff58bfff]
pci 0000:03:00.2: BAR 5: assigned [mem 0xff58c000-0xff58dfff]
pci 0000:03:00.0: BAR 4: no space for [io size 0x0100]
pci 0000:03:00.0: BAR 4: trying firmware assignment [io 0x1000-0x10ff]
pci 0000:03:00.0: BAR 4: [io 0x1000-0x10ff] conflicts with PNP0A08:00 [io 0x0d00-0xffff window]
pci 0000:03:00.0: BAR 4: failed to assign [io size 0x0100]
pci 0000:00:08.1: PCI bridge to [bus 03]
pci 0000:00:08.1: bridge window [mem 0xff200000-0xff5fffff]
pci 0000:00:08.1: bridge window [mem 0x230000000-0x247ffffff 64bit pref]
pci 0000:04:00.0: BAR 5: assigned [mem 0xff600000-0xff6007ff]
pci 0000:00:08.2: PCI bridge to [bus 04]
pci 0000:00:08.2: bridge window [mem 0xff600000-0xff6fffff]
pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0x7ffffffffff]
pci_bus 0000:01: resource 1 [mem 0xfef00000-0xfeffffff]
pci_bus 0000:02: resource 1 [mem 0xff000000-0xff1fffff]
pci_bus 0000:03: resource 1 [mem 0xff200000-0xff5fffff]
pci_bus 0000:03: resource 2 [mem 0x230000000-0x247ffffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xff600000-0xff6fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
pci 0000:03:00.3: extending delay after power-on from D3hot to 20 msec
pci 0000:00:08.1: can't find IRQ for PCI INT A; please try using pci=biosirq
pci 0000:03:00.3: can't find IRQ for PCI INT D; please try using pci=biosirq
pci 0000:03:00.4: extending delay after power-on from D3hot to 20 msec
pci 0000:03:00.4: can't find IRQ for PCI INT A; please try using pci=biosirq
pci 0000:03:00.4: quirk_usb_early_handoff+0x0/0x662 took 22870 usecs
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Initramfs unpacking failed: Decoding failed
Freeing initrd memory: 85340K
pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter.
pci 0000:00:00.2: can't find IRQ for PCI INT A; please try using pci=biosirq
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.6: Adding to iommu group 1
pci 0000:00:01.7: Adding to iommu group 2
pci 0000:00:08.0: Adding to iommu group 3
pci 0000:00:08.1: Adding to iommu group 4
pci 0000:00:08.2: Adding to iommu group 3
pci 0000:00:14.0: Adding to iommu group 5
pci 0000:00:14.3: Adding to iommu group 5
pci 0000:00:18.0: Adding to iommu group 6
pci 0000:00:18.1: Adding to iommu group 6
pci 0000:00:18.2: Adding to iommu group 6
pci 0000:00:18.3: Adding to iommu group 6
pci 0000:00:18.4: Adding to iommu group 6
pci 0000:00:18.5: Adding to iommu group 6
pci 0000:00:18.6: Adding to iommu group 6
pci 0000:00:18.7: Adding to iommu group 6
pci 0000:01:00.0: Adding to iommu group 7
pci 0000:01:00.1: Adding to iommu group 7
pci 0000:02:00.0: Adding to iommu group 8
pci 0000:03:00.0: Adding to iommu group 9
pci 0000:03:00.0: Using iommu direct mapping
pci 0000:03:00.1: Adding to iommu group 10
pci 0000:03:00.2: Adding to iommu group 10
pci 0000:03:00.3: Adding to iommu group 10
pci 0000:03:00.4: Adding to iommu group 10
pci 0000:03:00.6: Adding to iommu group 10
pci 0000:04:00.0: Adding to iommu group 3
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0x4f77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.6: PME: Signaling with IRQ 17
pcieport 0000:00:01.6: AER: enabled with IRQ 17
pcieport 0000:00:01.7: PME: Signaling with IRQ 18
pcieport 0000:00:01.7: AER: enabled with IRQ 18
pcieport 0000:00:08.1: PME: Signaling with IRQ 19
pcieport 0000:00:08.2: can't find IRQ for PCI INT A; please try using pci=biosirq
pcieport 0000:00:08.2: PME: Signaling with IRQ 20
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
pci 0000:03:00.0: BAR has moved, updating efifb address
efifb: showing boot graphics
efifb: framebuffer at 0x230000000, using 4224k, total 4224k
efifb: mode is 1366x768x32, linelength=5632, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Linux agpgart interface v0.103
battery: ACPI: Battery Slot [BAT1] (battery present)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.3: can't find IRQ for PCI INT D; please try using pci=biosirq
xhci_hcd 0000:03:00.3: xHCI Host Controller
xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.3.0-64-generic xhci-hcd
usb usb1: SerialNumber: 0000:03:00.3
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0000:03:00.3: xHCI Host Controller
xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 2
xhci_hcd 0000:03:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.3.0-64-generic xhci-hcd
usb usb2: SerialNumber: 0000:03:00.3
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:03:00.4: can't find IRQ for PCI INT A; please try using pci=biosirq
xhci_hcd 0000:03:00.4: xHCI Host Controller
xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.3.0-64-generic xhci-hcd
usb usb3: SerialNumber: 0000:03:00.4
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.4: xHCI Host Controller
xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 4
xhci_hcd 0000:03:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.3.0-64-generic xhci-hcd
usb usb4: SerialNumber: 0000:03:00.4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x0810100b
microcode: CPU1: patch_level=0x0810100b
microcode: CPU2: patch_level=0x0810100b
microcode: CPU3: patch_level=0x0810100b
microcode: CPU4: patch_level=0x0810100b
microcode: CPU5: patch_level=0x0810100b
microcode: CPU6: patch_level=0x0810100b
microcode: CPU7: patch_level=0x0810100b
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1187244654, 5251231)->(1327445541, -134949656)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: e55c71c7c9503b285e050ac81c7551e1cbbd40e4'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Problem loading X.509 certificate -65
Error adding keys to platform keyring UEFI:db
integrity: Loading X.509 certificate: UEFI:db
integrity: Problem loading X.509 certificate -65
Error adding keys to platform keyring UEFI:db
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Linpus: linpus.com: 2e092cab5e97a89f94a6e272ec7267c267cf4483'
ima: Allocated hash algorithm: sha1
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 13:961:891
event_source msr: hash matches
rtc_cmos 00:01: setting system clock to 2021-03-14T15:52:01 UTC (1615737121)
acpi_cpufreq: overriding BIOS provided _PSD data
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2680K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1412K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb 1-4: new full-speed USB device number 2 using xhci_hcd
hidraw: raw HID events driver (C) Jiri Kosina
i2c_hid i2c-ELAN0504:01: i2c-ELAN0504:01 supply vdd not found, using dummy regulator
i2c_hid i2c-ELAN0504:01: i2c-ELAN0504:01 supply vddl not found, using dummy regulator
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
rtsx_pci 0000:01:00.0: can't find IRQ for PCI INT B; please try using pci=biosirq
r8169 0000:01:00.1: can't find IRQ for PCI INT A; please try using pci=biosirq
ahci 0000:04:00.0: version 3.0
ahci 0000:04:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
libphy: r8169: probed
r8169 0000:01:00.1 eth0: RTL8411b, 98:28:a6:24:84:f2, XID 5c8, IRQ 40
r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
cryptd: max_cpu_qlen set to 1000
ahci 0000:04:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
scsi host0: ahci
ata1: SATA max UDMA/133 abar m2048@0xff600000 port 0xff600100 irq 39
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
usb 3-1: New USB device found, idVendor=0bda, idProduct=5648, bcdDevice= 0.06
usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-1: Product: VGA WebCam
usb 3-1: Manufacturer: KSVGA05001832027A4LM06
usb 3-1: SerialNumber: 200901010001
usb 1-4: New USB device found, idVendor=04ca, idProduct=3015, bcdDevice= 0.01
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
r8169 0000:01:00.1 enp1s0f1: renamed from eth0
[drm] amdgpu kernel modesetting enabled.
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add APU node [0x0:0x0]
Finished initializing topology
amdgpu 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 0: 0x230000000 -> 0x23fffffff
amdgpu 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 2: 0x240000000 -> 0x2401fffff
amdgpu 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xff500000 -> 0xff57ffff
checking generic (230000000 420000) vs hw (230000000 10000000)
fb0: switching to amdgpudrmfb from EFI VGA
amdgpu 0000:03:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1025:0x1259 0xC4).
[drm] register mmio base: 0xFF500000
[drm] register mmio size: 524288
[drm] PCI I/O BAR is not found.
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
ATOM BIOS: 113-RAVEN-113
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] VCN jpeg decode is enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:03:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
amdgpu 0000:03:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
amdgpu 0000:03:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=1024M
[drm] RAM width 64bits DDR4
[TTM] Zone kernel: Available graphics memory: 3541120 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 1024M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[drm] Warning: check cp_fw_version and update it to realize GRBM requires 1-cycle delay in cp firmware
[drm] use_doorbell being set to: [true]
amdgpu: [powerplay] hwmgr_sw_init smu backed is smu10_smu
[drm] Found VCN firmware Version ENC: 1.9 DEC: 1 VEP: 0 Revision: 28
[drm] PSP loading VCN firmware
[drm] reserve 0x400000 from 0xf400c00000 for PSP TMR
usb 3-2: new full-speed USB device number 3 using xhci_hcd
usb 3-2: New USB device found, idVendor=0458, idProduct=6001, bcdDevice=10.01
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Wireless Device
usb 3-2: Manufacturer: Genius
[drm] DM_PPLIB: values for F clock
[drm] DM_PPLIB: 400000 in kHz, 3174 in mV
[drm] DM_PPLIB: 933000 in kHz, 3724 in mV
[drm] DM_PPLIB: 1067000 in kHz, 3924 in mV
[drm] DM_PPLIB: 1200000 in kHz, 4074 in mV
[drm] DM_PPLIB: values for DCF clock
[drm] DM_PPLIB: 300000 in kHz, 3174 in mV
[drm] DM_PPLIB: 600000 in kHz, 3724 in mV
[drm] DM_PPLIB: 626000 in kHz, 3924 in mV
[drm] DM_PPLIB: 654000 in kHz, 4074 in mV
[drm] Display Core initialized with v3.2.35!
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] VCN decode and encode initialized successfully(under SPG Mode).
kfd kfd: Allocated 3969056 bytes on gart
Topology: Add APU node [0x15dd:0x1002]
kfd kfd: added device 1002:15dd
[drm] fb mappable at 0x91000000
[drm] vram apper at 0x90000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: Deferring console take-over
amdgpu 0000:03:00.0: fb0: amdgpudrmfb frame buffer device
tsc: Refined TSC clocksource calibration: 1996.249 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x398cadd9d93, max_idle_ns: 881590552906 ns
clocksource: Switched to clocksource tsc
input: Genius Wireless Device as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-2/3-2:1.0/0003:0458:6001.0001/input/input5
hid-generic 0003:0458:6001.0001: input,hidraw0: USB HID v1.01 Mouse [Genius Wireless Device] on usb-0000:03:00.4-2/input0
input: Genius Wireless Device System Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-2/3-2:1.1/0003:0458:6001.0002/input/input6
amdgpu 0000:03:00.0: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:03:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:03:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:03:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:03:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:03:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:03:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:03:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:03:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:03:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:03:00.0: ring sdma0 uses VM inv eng 0 on hub 1
amdgpu 0000:03:00.0: ring vcn_dec uses VM inv eng 1 on hub 1
amdgpu 0000:03:00.0: ring vcn_enc0 uses VM inv eng 4 on hub 1
amdgpu 0000:03:00.0: ring vcn_enc1 uses VM inv eng 5 on hub 1
amdgpu 0000:03:00.0: ring vcn_jpeg uses VM inv eng 6 on hub 1
[drm] Initialized amdgpu 3.33.0 20150101 for 0000:03:00.0 on minor 0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
input: Genius Wireless Device Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-2/3-2:1.1/0003:0458:6001.0002/input/input7
input: Genius Wireless Device as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-2/3-2:1.1/0003:0458:6001.0002/input/input8
hid-generic 0003:0458:6001.0002: input,hiddev0,hidraw1: USB HID v1.01 Device [Genius Wireless Device] on usb-0000:03:00.4-2/input1
input: Genius Wireless Device as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-2/3-2:1.2/0003:0458:6001.0003/input/input9
ata1.00: ATA-10: ST1000LM035-1RK172, ACM2, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
hid-generic 0003:0458:6001.0003: input,hidraw2: USB HID v1.01 Keyboard [Genius Wireless Device] on usb-0000:03:00.4-2/input2
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 ACM2 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5
sd 0:0:0:0: [sda] Attached SCSI disk
i2c_designware AMDI0010:01: controller timed out
raid6: avx2x4 gen() 17920 MB/s
raid6: avx2x4 xor() 11576 MB/s
raid6: avx2x2 gen() 17692 MB/s
raid6: avx2x2 xor() 11568 MB/s
raid6: avx2x1 gen() 14004 MB/s
raid6: avx2x1 xor() 10181 MB/s
raid6: sse2x4 gen() 13220 MB/s
raid6: sse2x4 xor() 7897 MB/s
raid6: sse2x2 gen() 12851 MB/s
raid6: sse2x2 xor() 8161 MB/s
raid6: sse2x1 gen() 6554 MB/s
raid6: sse2x1 xor() 6247 MB/s
raid6: using algorithm avx2x4 gen() 17920 MB/s
raid6: .... xor() 11576 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Started Journal Service.
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd-journald[441]: Received request to flush runtime journal from PID 1
systemd-journald[441]: File /var/log/journal/27cf79240b3c4acfbc2f7ed1a9767caa/system.journal corrupted or uncleanly shut down, renaming and replacing.
lp: driver loaded but no devices found
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
ppdev: user-space parallel port driver
acpi AMDI0010:01: Already enumerated
input: Acer Wireless Radio Control as /devices/LNXSYSTM:00/10251229:00/input/input10
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x801
input: Acer WMI hotkeys as /devices/virtual/input/input11
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
mc: Linux media interface: v0.10
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
videodev: Linux video capture interface: v2.00
usbcore: registered new interface driver btusb
ath10k_pci 0000:02:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
pcieport 0000:00:01.7: AER: Corrected error received: 0000:00:01.0
pcieport 0000:00:01.7: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
pcieport 0000:00:01.7: AER: device [1022:15d3] error status/mask=00000040/00006000
pcieport 0000:00:01.7: AER: [ 6] BadTLP
Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
pcieport 0000:00:01.7: AER: Corrected error received: 0000:00:01.0
pcieport 0000:00:01.7: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
pcieport 0000:00:01.7: AER: device [1022:15d3] error status/mask=00000040/00006000
pcieport 0000:00:01.7: AER: [ 6] BadTLP
uvcvideo: Found UVC 1.00 device VGA WebCam (0bda:5648)
uvcvideo 3-1:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 3-1:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 3-1:1.0: Entity type for entity Camera 1 was not initialized!
input: VGA WebCam: VGA WebCam as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-1/3-1:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:03:00.1: can't find IRQ for PCI INT B; please try using pci=biosirq
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:03:00.6: can't find IRQ for PCI INT C; please try using pci=biosirq
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input13
ath10k_pci 0000:02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6
ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input14
ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
ath10k_pci 0000:02:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
ath: EEPROM regdomain: 0x69
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x69
ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
spl: loading out-of-tree module taints kernel.
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
ZFS: Loaded module v0.8.1-1ubuntu14.4, ZFS pool version 5000, ZFS filesystem version 5
audit: type=1400 audit(1615737151.756:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=916 comm="apparmor_parser"
audit: type=1400 audit(1615737151.756:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=912 comm="apparmor_parser"
audit: type=1400 audit(1615737151.756:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=912 comm="apparmor_parser"
audit: type=1400 audit(1615737151.764:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=914 comm="apparmor_parser"
audit: type=1400 audit(1615737151.784:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ibus/ibus-engine-hangul" pid=918 comm="apparmor_parser"
audit: type=1400 audit(1615737151.796:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=919 comm="apparmor_parser"
audit: type=1400 audit(1615737151.796:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=915 comm="apparmor_parser"
audit: type=1400 audit(1615737151.800:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=913 comm="apparmor_parser"
audit: type=1400 audit(1615737151.800:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=913 comm="apparmor_parser"
audit: type=1400 audit(1615737151.800:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=913 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE)
r8169 0000:01:00.1 enp1s0f1: Link is Down
pcieport 0000:00:01.7: AER: Multiple Corrected error received: 0000:00:01.0
pcieport 0000:00:01.7: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
pcieport 0000:00:01.7: AER: device [1022:15d3] error status/mask=00000040/00006000
pcieport 0000:00:01.7: AER: [ 6] BadTLP
ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
r8169 0000:01:00.1 enp1s0f1: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
wlp2s0: authenticate with 60:ce:86:52:a1:f5
wlp2s0: send auth to 60:ce:86:52:a1:f5 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 60:ce:86:52:a1:f5 (try 1/3)
wlp2s0: RX AssocResp from 60:ce:86:52:a1:f5 (capab=0xc31 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x81e4
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x10
ath: Country alpha2 being used: MX
ath: Regpair used: 0x10
ath: regdomain 0x81e4 dynamically updated by country element
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 60:ce:86:52:a1:f5
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
rfkill: input handler disabled
rfkill: input handler enabled
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
kauditd_printk_skb: 57 callbacks suppressed
audit: type=1400 audit(1615758879.274:69): apparmor="DENIED" operation="capable" profile="/snap/core/10859/usr/lib/snapd/snap-confine" pid=2466 comm="snap-confine" capability=4 capname="fsetid"
audit: type=1400 audit(1615758908.338:70): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/+pnp:00:02" pid=2466 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
acer_wmi: Unknown function number - 8 - 0