dmesg - test2
microcode: microcode updated early to revision 0xde, date = 2020-05-25
Linux version 5.10.16-200.fc33.x86_64 (mockbuild@bkernel01.iad2.fedoraproject.org) (gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9), GNU ld version 2.35-18.fc33) #1 SMP Sun Feb 14 03:02:32 UTC 2021
Command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-5.10.16-200.fc33.x86_64 root=/dev/mapper/fedora_localhost--live-root ro resume=/dev/mapper/fedora_localhost--live-swap rd.lvm.lv=fedora_localhost-live/root rd.lvm.lv=fedora_localhost-live/swap rhgb quiet systemd.unified_cgroup_hierarchy=0
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000a303afff] usable
BIOS-e820: [mem 0x00000000a303b000-0x00000000a303bfff] ACPI NVS
BIOS-e820: [mem 0x00000000a303c000-0x00000000a303cfff] reserved
BIOS-e820: [mem 0x00000000a303d000-0x00000000b6c33fff] usable
BIOS-e820: [mem 0x00000000b6c34000-0x00000000b9f76fff] reserved
BIOS-e820: [mem 0x00000000b9f77000-0x00000000b9ff3fff] ACPI data
BIOS-e820: [mem 0x00000000b9ff4000-0x00000000ba4b0fff] ACPI NVS
BIOS-e820: [mem 0x00000000ba4b1000-0x00000000bacfdfff] reserved
BIOS-e820: [mem 0x00000000bacfe000-0x00000000bacfefff] usable
BIOS-e820: [mem 0x00000000bacff000-0x00000000bf7fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023e7fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xa0b65018-0xa0b75057] usable ==> usable
e820: update [mem 0xa0b65018-0xa0b75057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000a0b65017] usable
reserve setup_data: [mem 0x00000000a0b65018-0x00000000a0b75057] usable
reserve setup_data: [mem 0x00000000a0b75058-0x00000000a303afff] usable
reserve setup_data: [mem 0x00000000a303b000-0x00000000a303bfff] ACPI NVS
reserve setup_data: [mem 0x00000000a303c000-0x00000000a303cfff] reserved
reserve setup_data: [mem 0x00000000a303d000-0x00000000b6c33fff] usable
reserve setup_data: [mem 0x00000000b6c34000-0x00000000b9f76fff] reserved
reserve setup_data: [mem 0x00000000b9f77000-0x00000000b9ff3fff] ACPI data
reserve setup_data: [mem 0x00000000b9ff4000-0x00000000ba4b0fff] ACPI NVS
reserve setup_data: [mem 0x00000000ba4b1000-0x00000000bacfdfff] reserved
reserve setup_data: [mem 0x00000000bacfe000-0x00000000bacfefff] usable
reserve setup_data: [mem 0x00000000bacff000-0x00000000bf7fffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000023e7fffff] usable
efi: EFI v2.70 by American Megatrends
efi: ACPI 2.0=0xb9f90000 ACPI=0xb9f90000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0xba424000 ESRT=0xba9a7218 MEMATTR=0xb2e69018 RNG=0xba9a7e98 TPMEventLog=0xa313b018
efi: seeding entropy pool
[Firmware Bug]: TPM Final Events table missing or invalid
secureboot: Secure boot disabled
SMBIOS 3.1.1 present.
DMI: Dell Inc. Vostro 3470/04FN10, BIOS 1.5.21 01/30/2019
tsc: Detected 2800.000 MHz processor
tsc: Detected 2799.927 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x23e800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00BE000000 mask 7FFE000000 uncachable
2 base 00BD000000 mask 7FFF000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xbacff max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000ba9a7218 to 0x00000000ba9a7250.
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x5dda0000-0x6003efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000B9F90000 000024 (v02 DELL )
ACPI: XSDT 0x00000000B9F900B0 0000DC (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x00000000B9FCEBB0 000114 (v06 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x00000000B9F90218 03E994 (v02 DELL CBX3 01072009 INTL 20160527)
ACPI: FACS 0x00000000BA4AF080 000040
ACPI: APIC 0x00000000B9FCECC8 0000A0 (v04 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x00000000B9FCED68 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FIDT 0x00000000B9FCEDB0 00009C (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x00000000B9FCEE50 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: SSDT 0x00000000B9FCEE90 0017D5 (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
ACPI: BOOT 0x00000000B9FD0668 000028 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: SSDT 0x00000000B9FD0690 0031C8 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
ACPI: HPET 0x00000000B9FD3858 000038 (v01 INTEL CBX3 00000002 01000013)
ACPI: SSDT 0x00000000B9FD3890 000E82 (v02 INTEL Ther_Rvp 00001000 INTL 20160527)
ACPI: SSDT 0x00000000B9FD4718 0008D0 (v02 INTEL DELL_SFF 00000000 INTL 20160527)
ACPI: UEFI 0x00000000B9FD4FE8 000048 (v01 DELL\x CBX3 00000002 01000013)
ACPI: LPIT 0x00000000B9FD5030 00005C (v01 INTEL CBX3 00000002 01000013)
ACPI: SSDT 0x00000000B9FD5090 0027DE (v02 INTEL PtidDevc 00001000 INTL 20160527)
ACPI: SSDT 0x00000000B9FD7870 0014E2 (v02 INTEL TbtTypeC 00000000 INTL 20160527)
ACPI: DBGP 0x00000000B9FD8D58 000034 (v01 DELL\x CBX3 00000002 01000013)
ACPI: DBG2 0x00000000B9FD8D90 000054 (v00 DELL\x CBX3 00000002 01000013)
ACPI: MSDM 0x00000000B9FD8DE8 000055 (v03 DELL CBX3 06222004 AMI 00010013)
ACPI: SLIC 0x00000000B9FD8E40 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: SSDT 0x00000000B9FD8FB8 000144 (v02 Intel ADebTabl 00001000 INTL 20160527)
ACPI: DMAR 0x00000000B9FD9100 0000A8 (v01 INTEL EDK2 00000002 01000013)
ACPI: BGRT 0x00000000B9FD91A8 000038 (v00 01072009 AMI 00010013)
ACPI: TPM2 0x00000000B9FD91E0 000034 (v04 DELL\x CBX3 00000001 AMI 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023e7fffff]
NODE_DATA(0) allocated [mem 0x23e7d3000-0x23e7fdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023e7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000a303afff]
node 0: [mem 0x00000000a303d000-0x00000000b6c33fff]
node 0: [mem 0x00000000bacfe000-0x00000000bacfefff]
node 0: [mem 0x0000000100000000-0x000000023e7fffff]
Zeroed struct page in unavailable ranges: 44079 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000023e7fffff]
On node 0 totalpages: 2053073
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 11633 pages used for memmap
DMA32 zone: 744499 pages, LIFO batch:63
Normal zone: 20384 pages used for memmap
Normal zone: 1304576 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0xbd800000-0xbf7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0xb29d3000-0xb2a5cfff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 6 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xa0b65000-0xa0b65fff]
PM: hibernation: Registered nosave memory: [mem 0xa0b75000-0xa0b75fff]
PM: hibernation: Registered nosave memory: [mem 0xa303b000-0xa303bfff]
PM: hibernation: Registered nosave memory: [mem 0xa303c000-0xa303cfff]
PM: hibernation: Registered nosave memory: [mem 0xb29d3000-0xb2a5cfff]
PM: hibernation: Registered nosave memory: [mem 0xb6c34000-0xb9f76fff]
PM: hibernation: Registered nosave memory: [mem 0xb9f77000-0xb9ff3fff]
PM: hibernation: Registered nosave memory: [mem 0xb9ff4000-0xba4b0fff]
PM: hibernation: Registered nosave memory: [mem 0xba4b1000-0xbacfdfff]
PM: hibernation: Registered nosave memory: [mem 0xbacff000-0xbf7fffff]
PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xbf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists, mobility grouping on. Total pages: 2020971
Policy zone: Normal
Kernel command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-5.10.16-200.fc33.x86_64 root=/dev/mapper/fedora_localhost--live-root ro resume=/dev/mapper/fedora_localhost--live-swap rd.lvm.lv=fedora_localhost-live/root rd.lvm.lv=fedora_localhost-live/swap rhgb quiet systemd.unified_cgroup_hierarchy=0
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 7879724K/8212292K available (14345K kernel code, 3465K rwdata, 9708K rodata, 2540K init, 5504K bss, 332308K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x2e/0x550 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 45616 entries in 179 pages
ftrace: allocated 179 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
NR_IRQS: 524544, nr_irqs: 1536, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200925
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x000000ba753000 end: 0x000000ba99cfff
DMAR: RMRR base: 0x000000bd000000 end: 0x000000bf7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285bfbafad2, max_idle_ns: 440795215530 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.85 BogoMIPS (lpj=2799927)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux: Initializing.
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i5-8400 CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5
smp: Brought up 1 node, 6 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 6 processors activated (33599.12 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xa303b000-0xa303bfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xb9ff4000-0xba4b0fff] (4968448 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 03:09:58, date: 2021-02-20
NET: Registered protocol family 16
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1613790598.026:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
Simple Boot Flag at 0x47 set to 0x80
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
alg: No test for 842 (842-generic)
alg: No test for 842 (842-scomp)
raid6: skip pq benchmark and using algorithm avx2x4
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF960B80B1D800 000684 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF960B812C4C00 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF960B81367800 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF960B80B1D000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF960B80B6B000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF960B812C5400 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF960B812C7C00 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: Power Resource [PIN] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xbf800000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
pci 0000:00:02.0: [8086:3e92] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xd131e000-0xd131efff 64bit]
pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0xd131d000-0xd131dfff 64bit]
pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd1300000-0xd130ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0xd1316000-0xd1317fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0xd131c000-0xd131cfff 64bit]
pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd131b000-0xd131bfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xd1314000-0xd1315fff]
pci 0000:00:17.0: reg 0x14: [mem 0xd131a000-0xd131a0ff]
pci 0000:00:17.0: reg 0x18: [io 0x4090-0x4097]
pci 0000:00:17.0: reg 0x1c: [io 0x4080-0x4083]
pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:17.0: reg 0x24: [mem 0xd1319000-0xd13197ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a33c] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
pci 0000:00:1c.7: [8086:a33f] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PTM enabled (root), 4ns granularity
pci 0000:00:1f.0: [8086:a304] type 00 class 0x060100
pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xd1310000-0xd1313fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xd1000000-0xd10fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xd1318000-0xd13180ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x18: [mem 0xd1204000-0xd1204fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xd1200000-0xd1203fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xd1200000-0xd12fffff]
pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xd1100000-0xd117ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xd1180000-0xd118ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 02]
pci 0000:00:1c.7: bridge window [mem 0xd1100000-0xd11fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs) *1
ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs) *1
ACPI: PCI Interrupt Link [LNKH] (IRQs) *1
iommu: Default domain type: Translated
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xa0b65018-0xa3ffffff]
e820: reserve RAM buffer [mem 0xa303b000-0xa3ffffff]
e820: reserve RAM buffer [mem 0xb29d3000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb6c34000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xbacff000-0xbbffffff]
e820: reserve RAM buffer [mem 0x23e800000-0x23fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a3f] has been reserved
system 00:00: [io 0x0a40-0x0a7f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x1800-0x18fe] could not be reserved
system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:05: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x2000-0x20fe] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd6e0000-0xfd6effff] has been reserved
system 00:07: [mem 0xfd6d0000-0xfd6dffff] has been reserved
system 00:07: [mem 0xfd6b0000-0xfd6bffff] has been reserved
system 00:07: [mem 0xfd6a0000-0xfd6affff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xd1200000-0xd12fffff]
pci 0000:00:1c.7: PCI bridge to [bus 02]
pci 0000:00:1c.7: bridge window [mem 0xd1100000-0xd11fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 18 [mem 0xbf800000-0xf7ffffff window]
pci_bus 0000:00: resource 19 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xd1200000-0xd12fffff]
pci_bus 0000:02: resource 1 [mem 0xd1100000-0xd11fffff]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 35452K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000ae9d3000-0x00000000b29d3000] (64MB)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
NET: Registered protocol family 38
xor: automatically using best checksumming function avx
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:1c.0: AER: enabled with IRQ 122
pcieport 0000:00:1c.0: DPC: enabled with IRQ 122
pcieport 0000:00:1c.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1c.7: AER: enabled with IRQ 123
pcieport 0000:00:1c.7: DPC: enabled with IRQ 123
pcieport 0000:00:1c.7: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xc0000000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.5.1 model 0x9E
intel_idle: Local APIC timer is reliable in all C-states
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xd1319000 port 0xd1319100 irq 124
ata2: SATA max UDMA/133 abar m2048@0xd1319000 port 0xd1319180 irq 124
ata3: SATA max UDMA/133 abar m2048@0xd1319000 port 0xd1319200 irq 124
ata4: SATA max UDMA/133 abar m2048@0xd1319000 port 0xd1319280 irq 124
ata5: DUMMY
ata6: DUMMY
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.16-200.fc33.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.16-200.fc33.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb: port power management may be unreliable
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2021-02-20T03:09:59 UTC (1613790599)
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
RPL Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: sig=0x906ea, pf=0x2, revision=0xde
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (937095769, 8797572)->(949017420, -3124079)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 68c58f561b2d4a6e7ae6694191125e0ad6edd015'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, crc32c=crc32c-generic
Key type encrypted registered
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 9:409:159
acpi device:26: hash matches
RAS: Correctable Errors collector initialized.
ata4: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata1.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-5: new low-speed USB device number 2 using xhci_hcd
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2540K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 532K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
rhgb
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=(hd0,gpt2)/vmlinuz-5.10.16-200.fc33.x86_64
usb 1-5: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: Dell MS116 USB Optical Mouse
usb 1-5: Manufacturer: PixArt
input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:413C:301A.0001/input/input3
hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-5/input0
systemd[1]: systemd v246.10-1.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
usb 1-6: new low-speed USB device number 3 using xhci_hcd
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: Queued start job for default target Initrd Default Target.
systemd[1]: Reached target Local File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Started Memstrack Anylazing Service.
systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: memstrack.service: Succeeded.
systemd[1]: Started Journal Service.
fuse: init (API version 7.32)
audit: type=1130 audit(1613790600.137:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1613790600.138:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1613790600.143:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1613790600.144:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1613790600.144:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 1-6: New USB device found, idVendor=413c, idProduct=2113, bcdDevice=33.08
usb 1-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-6: Product: Dell KB216 Wired Keyboard
audit: type=1130 audit(1613790600.197:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:413C:2113.0002/input/input4
audit: type=1130 audit(1613790600.214:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1334 audit(1613790600.214:9): prog-id=5 op=LOAD
audit: type=1334 audit(1613790600.214:10): prog-id=6 op=LOAD
hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-6/input0
input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:413C:2113.0003/input/input5
input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:413C:2113.0003/input/input6
hid-generic 0003:413C:2113.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-6/input1
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
wmi_bus wmi_bus-PNP0C14:02: WQBC data block query control method not found
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
libphy: r8169: probed
r8169 0000:01:00.0 eth0: RTL8168h/8111h, 8c:ec:4b:8f:a8:02, XID 541, IRQ 126
r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
r8169 0000:01:00.0 enp1s0: renamed from eth0
usb 1-7: new high-speed USB device number 4 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2807.992 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879bebd5fb, max_idle_ns: 440795349991 ns
clocksource: Switched to clocksource tsc
checking generic (c0000000 7e9000) vs hw (d0000000 1000000)
checking generic (c0000000 7e9000) vs hw (c0000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
i915 0000:00:02.0: vgaarb: deactivate vga console
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-7: New USB device found, idVendor=0424, idProduct=2137, bcdDevice=60.80
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: USB2137B
usb 1-7: Manufacturer: SMSC
i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 7 ports detected
[drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
fbcon: i915drmfb (fb0) is primary device
fbcon: Deferring console take-over
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
usb 1-8: new high-speed USB device number 5 using xhci_hcd
usb 1-8: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8: Product: USB2.0-CRW
usb 1-8: Manufacturer: Generic
usb 1-8: SerialNumber: 20100201396000000
usb 1-7.5: new full-speed USB device number 6 using xhci_hcd
usb 1-7.5: New USB device found, idVendor=04d8, idProduct=0b29, bcdDevice= 0.02
usb 1-7.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7.5: Product: U2417H_0B29_15083001
usb 1-7.5: Manufacturer: Microchip Technology Inc.
hid-generic 0003:04D8:0B29.0004: hiddev97,hidraw3: USB HID v1.11 Device [Microchip Technology Inc. U2417H_0B29_15083001] on usb-0000:00:14.0-7.5/input0
usb 1-14: new full-speed USB device number 7 using xhci_hcd
usb 1-14: New USB device found, idVendor=0cf3, idProduct=e005, bcdDevice= 0.02
usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver rtsx_usb
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd v246.10-1.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
zram_generator::generator[593]: Creating dev-zram0.swap for /dev/zram0 (3889MB)
systemd-sysv-generator[591]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[591]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
zram: Added device: zram0
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: /usr/lib/systemd/system/mcelog.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
kauditd_printk_skb: 41 callbacks suppressed
audit: type=1334 audit(1613790605.499:52): prog-id=13 op=LOAD
audit: type=1334 audit(1613790605.500:53): prog-id=14 op=LOAD
audit: type=1131 audit(1613790605.500:54): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: initrd-switch-root.service: Succeeded.
systemd[1]: Stopped Switch Root.
audit: type=1130 audit(1613790605.501:55): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1613790605.501:56): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-sshd\x2dkeygen.slice.
systemd[1]: Created slice system-swap\x2dcreate.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Login Prompts.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on User Database Manager Socket.
systemd[1]: Activating swap /dev/mapper/fedora_localhost--live-swap...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Preprocess NFS configuration convertion...
systemd[1]: plymouth-switch-root.service: Succeeded.
systemd[1]: Stopped Plymouth switch root service.
audit: type=1131 audit(1613790605.514:57): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Stopped Journal Service.
audit: type=1130 audit(1613790605.560:58): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1613790605.560:59): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1334 audit(1613790605.560:60): prog-id=13 op=UNLOAD
audit: type=1334 audit(1613790605.560:61): prog-id=14 op=UNLOAD
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
Adding 1048572k swap on /dev/mapper/fedora_localhost--live-swap. Priority:-2 extents:1 across:1048572k FS
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: sysroot.mount: Succeeded.
systemd[1]: Activated swap /dev/mapper/fedora_localhost--live-swap.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: modprobe@configfs.service: Succeeded.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: modprobe@fuse.service: Succeeded.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
EXT4-fs (dm-0): re-mounted. Opts: (null)
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: nfs-convert.service: Succeeded.
systemd[1]: Finished Preprocess NFS configuration convertion.
systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped.
systemd[1]: Condition check resulted in First Boot Wizard being skipped.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Condition check resulted in Create System Users being skipped.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
input: Dell WMI hotkeys as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input8
EDAC ie31200: No ECC support
EDAC ie31200: No ECC support
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
input: PC Speaker as /devices/platform/pcspkr/input/input9
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
i2c i2c-5: 1/2 memory slots populated (from DMI)
i2c i2c-5: Successfully instantiated SPD at 0x50
zram0: detected capacity change from 0 to 4077912064
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
Adding 3982332k swap on /dev/zram0. Priority:100 extents:1 across:3982332k SSFS
ee1004 5-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
iTCO_vendor_support: vendor-support=0
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: don't support firmware rome 0x31010100
usbcore: registered new interface driver ath3k
ath9k 0000:02:00.0: enabling device (0100 -> 0102)
ath: phy0: WB335 2-ANT card detected
ath: phy0: Set BT/WLAN RX diversity capability
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: AER: can't find device of ID00e7
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: AER: can't find device of ID00e7
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x43
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9565 Rev:2 mem=0xffffa61582880000, irq=19
ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
snd_hda_intel 0000:00:1f.3: enabling device (0100 -> 0102)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC891: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x17/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x1b
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
snd_hda_codec_hdmi hdaudioC0D2: Monitor plugged-in, Failed to power up codec ret=[-13]
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
kauditd_printk_skb: 30 callbacks suppressed
audit: type=1130 audit(1613790610.756:92): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck@dev-mapper-fedora_localhost\x2d\x2dlive\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
audit: type=1130 audit(1613790611.587:95): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1613790611.637:96): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1613790611.645:97): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1613790612.075:98): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1613790612.228:99): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
r8169 0000:01:00.0 enp1s0: Link is Down
r8169 0000:01:00.0 enp1s0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
usb 1-7: USB disconnect, device number 4
usb 1-7.5: USB disconnect, device number 6
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
perf: interrupt took too long (3135 > 3130), lowering kernel.perf_event_max_sample_rate to 63000
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
perf: interrupt took too long (3928 > 3918), lowering kernel.perf_event_max_sample_rate to 50000
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
usb 1-7: new high-speed USB device number 8 using xhci_hcd
usb 1-7: New USB device found, idVendor=0424, idProduct=2137, bcdDevice=60.80
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: USB2137B
usb 1-7: Manufacturer: SMSC
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 7 ports detected
usb 1-7.5: new full-speed USB device number 9 using xhci_hcd
usb 1-7.5: New USB device found, idVendor=04d8, idProduct=0b29, bcdDevice= 0.02
usb 1-7.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7.5: Product: U2417H_0B29_15083001
usb 1-7.5: Manufacturer: Microchip Technology Inc.
hid-generic 0003:04D8:0B29.0005: hiddev97,hidraw3: USB HID v1.11 Device [Microchip Technology Inc. U2417H_0B29_15083001] on usb-0000:00:14.0-7.5/input0
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
systemd-sysv-generator[59841]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[59841]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
zram_generator::generator[59843]: Creating dev-zram0.swap for /dev/zram0 (3889MB)
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
usb 1-7: USB disconnect, device number 8
usb 1-7.5: USB disconnect, device number 9
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
usb 1-7: new high-speed USB device number 10 using xhci_hcd
usb 1-7: New USB device found, idVendor=0424, idProduct=2137, bcdDevice=60.80
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: USB2137B
usb 1-7: Manufacturer: SMSC
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 7 ports detected
usb 1-7.5: new full-speed USB device number 11 using xhci_hcd
usb 1-7.5: New USB device found, idVendor=04d8, idProduct=0b29, bcdDevice= 0.02
usb 1-7.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7.5: Product: U2417H_0B29_15083001
usb 1-7.5: Manufacturer: Microchip Technology Inc.
hid-generic 0003:04D8:0B29.0006: hiddev97,hidraw3: USB HID v1.11 Device [Microchip Technology Inc. U2417H_0B29_15083001] on usb-0000:00:14.0-7.5/input0
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
systemd-sysv-generator[83082]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[83082]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
zram_generator::generator[83084]: Creating dev-zram0.swap for /dev/zram0 (3889MB)
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
usb 1-7: USB disconnect, device number 10
usb 1-7.5: USB disconnect, device number 11
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
usb 1-7: new high-speed USB device number 12 using xhci_hcd
usb 1-7: New USB device found, idVendor=0424, idProduct=2137, bcdDevice=60.80
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: USB2137B
usb 1-7: Manufacturer: SMSC
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 7 ports detected
usb 1-7.5: new full-speed USB device number 13 using xhci_hcd
usb 1-7.5: New USB device found, idVendor=04d8, idProduct=0b29, bcdDevice= 0.02
usb 1-7.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7.5: Product: U2417H_0B29_15083001
usb 1-7.5: Manufacturer: Microchip Technology Inc.
hid-generic 0003:04D8:0B29.0007: hiddev97,hidraw3: USB HID v1.11 Device [Microchip Technology Inc. U2417H_0B29_15083001] on usb-0000:00:14.0-7.5/input0
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout
pcieport 0000:00:1c.7: AER: Corrected error received: 0000:00:1c.7
pcieport 0000:00:1c.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.7: device [8086:a33f] error status/mask=00001000/00002000
pcieport 0000:00:1c.7: [12] Timeout