dmesg - desram
Linux version 5.4.0-65-generic (buildd@lcy01-amd64-018) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #73-Ubuntu SMP Mon Jan 18 17:25:17 UTC 2021 (Ubuntu 5.4.0-65.73-generic 5.4.78)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d81fff] usable
BIOS-e820: [mem 0x0000000009d82000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x000000005b3b1fff] usable
BIOS-e820: [mem 0x000000005b3b2000-0x000000005b4d0fff] reserved
BIOS-e820: [mem 0x000000005b4d1000-0x000000005b650fff] usable
BIOS-e820: [mem 0x000000005b651000-0x000000005ba5efff] ACPI NVS
BIOS-e820: [mem 0x000000005ba5f000-0x000000005ca86fff] reserved
BIOS-e820: [mem 0x000000005ca87000-0x000000005effffff] usable
BIOS-e820: [mem 0x000000005f000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f33ffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x56d4f018-0x56d5d057] usable ==> usable
e820: update [mem 0x56d4f018-0x56d5d057] usable ==> usable
e820: update [mem 0x56d41018-0x56d4e457] usable ==> usable
e820: update [mem 0x56d41018-0x56d4e457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009d81fff] usable
reserve setup_data: [mem 0x0000000009d82000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
reserve setup_data: [mem 0x000000000a20b000-0x000000000affffff] usable
reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
reserve setup_data: [mem 0x000000000b020000-0x0000000056d41017] usable
reserve setup_data: [mem 0x0000000056d41018-0x0000000056d4e457] usable
reserve setup_data: [mem 0x0000000056d4e458-0x0000000056d4f017] usable
reserve setup_data: [mem 0x0000000056d4f018-0x0000000056d5d057] usable
reserve setup_data: [mem 0x0000000056d5d058-0x000000005b3b1fff] usable
reserve setup_data: [mem 0x000000005b3b2000-0x000000005b4d0fff] reserved
reserve setup_data: [mem 0x000000005b4d1000-0x000000005b650fff] usable
reserve setup_data: [mem 0x000000005b651000-0x000000005ba5efff] ACPI NVS
reserve setup_data: [mem 0x000000005ba5f000-0x000000005ca86fff] reserved
reserve setup_data: [mem 0x000000005ca87000-0x000000005effffff] usable
reserve setup_data: [mem 0x000000005f000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000041f33ffff] usable
efi: EFI v2.70 by American Megatrends
efi: ACPI 2.0=0x5b9dc000 ACPI=0x5b9dc000 SMBIOS=0x5c8cb000 MEMATTR=0x56e97018 ESRT=0x56e9ef98
secureboot: Secure boot disabled
SMBIOS 2.8 present.
DMI: Micro-Star International Co., Ltd MS-7C02/B450 TOMAHAWK MAX (MS-7C02), BIOS 3.70 06/09/2020
tsc: Fast TSC calibration failed
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x41f340 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0x5f000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x0000000056e9ef98 to 0x0000000056e9efd0.
e820: update [mem 0x56e9e000-0x56e9efff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x382d9000-0x3d48ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000005B9DC000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000005B9DC0A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000005B9E39B8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000005B9DC200 0077B7 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x000000005BA48E00 000040
ACPI: APIC 0x000000005B9E3AD0 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000005B9E3C30 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000005B9E3C78 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000005B9E3D18 000094 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: SSDT 0x000000005B9E3DB0 005419 (v02 AMD AmdTable 00000002 MSFT 04000000)
ACPI: SSDT 0x000000005B9E91D0 003776 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x000000005B9EC948 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x000000005B9EC988 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: UEFI 0x000000005B9EC9C0 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: IVRS 0x000000005B9ECA08 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x000000005B9ECAD8 00119C (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x000000005B9EDC78 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x000000005B9EE488 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: BGRT 0x000000005B9EE4B8 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000005B9EE4F0 000C34 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x000000005B9EF128 0010AC (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x000000005B9F01D8 001D4A (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x000000005B9F1F28 0000BF (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: WSMT 0x000000005B9F1FE8 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f33ffff]
NODE_DATA(0) allocated [mem 0x41f315000-0x41f33ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041f33ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009d81fff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a20b000-0x000000000affffff]
node 0: [mem 0x000000000b020000-0x000000005b3b1fff]
node 0: [mem 0x000000005b4d1000-0x000000005b650fff]
node 0: [mem 0x000000005ca87000-0x000000005effffff]
node 0: [mem 0x0000000100000000-0x000000041f33ffff]
Zeroed struct page in unavailable ranges: 13599 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f33ffff]
On node 0 totalpages: 3656417
DMA zone: 64 pages used for memmap
DMA zone: 30 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 5921 pages used for memmap
DMA32 zone: 378882 pages, LIFO batch:63
Normal zone: 51149 pages used for memmap
Normal zone: 3273536 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
e820: update [mem 0x56e06000-0x56e62fff] usable ==> reserved
smpboot: Allowing 32 CPUs, 24 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09d82000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: Registered nosave memory: [mem 0x56d41000-0x56d41fff]
PM: Registered nosave memory: [mem 0x56d4e000-0x56d4efff]
PM: Registered nosave memory: [mem 0x56d4f000-0x56d4ffff]
PM: Registered nosave memory: [mem 0x56d5d000-0x56d5dfff]
PM: Registered nosave memory: [mem 0x56e06000-0x56e62fff]
PM: Registered nosave memory: [mem 0x56e9e000-0x56e9efff]
PM: Registered nosave memory: [mem 0x5b3b2000-0x5b4d0fff]
PM: Registered nosave memory: [mem 0x5b651000-0x5ba5efff]
PM: Registered nosave memory: [mem 0x5ba5f000-0x5ca86fff]
PM: Registered nosave memory: [mem 0x5f000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists, mobility grouping on. Total pages: 3599253
Policy zone: Normal
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 14071480K/14625668K available (14339K kernel code, 2399K rwdata, 4960K rodata, 2724K init, 4980K bss, 554188K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 44555 entries in 175 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3599.882 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e3e339f9a, max_idle_ns: 440795204041 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7199.76 BogoMIPS (lpj=14399528)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Vulnerable
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Ryzen 5 2400G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 4
smpboot: Total of 8 processors activated (57598.11 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
PM: Registering ACPI NVS region [mem 0x5b651000-0x5ba5efff] (4251648 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 13:07:46, date: 2021-02-20
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1613826466.164:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 9 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
pci 0000:12:00.0: [1022:43d5] type 00 class 0x0c0330
pci 0000:12:00.0: reg 0x10: [mem 0xfcea0000-0xfcea7fff 64bit]
pci 0000:12:00.0: enabling Extended Tags
pci 0000:12:00.0: PME# supported from D3hot D3cold
pci 0000:12:00.1: [1022:43c8] type 00 class 0x010601
pci 0000:12:00.1: reg 0x24: [mem 0xfce80000-0xfce9ffff]
pci 0000:12:00.1: reg 0x30: [mem 0xfce00000-0xfce7ffff pref]
pci 0000:12:00.1: enabling Extended Tags
pci 0000:12:00.1: PME# supported from D3hot D3cold
pci 0000:12:00.2: [1022:43c6] type 01 class 0x060400
pci 0000:12:00.2: enabling Extended Tags
pci 0000:12:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.2: PCI bridge to [bus 12-28]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfcc00000-0xfcefffff]
pci 0000:20:00.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:00.0: enabling Extended Tags
pci 0000:20:00.0: PME# supported from D3hot D3cold
pci 0000:20:01.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:01.0: enabling Extended Tags
pci 0000:20:01.0: PME# supported from D3hot D3cold
pci 0000:20:04.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:04.0: enabling Extended Tags
pci 0000:20:04.0: PME# supported from D3hot D3cold
pci 0000:20:06.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:06.0: enabling Extended Tags
pci 0000:20:06.0: PME# supported from D3hot D3cold
pci 0000:20:07.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:07.0: enabling Extended Tags
pci 0000:20:07.0: PME# supported from D3hot D3cold
pci 0000:12:00.2: PCI bridge to [bus 20-28]
pci 0000:12:00.2: bridge window [io 0xf000-0xffff]
pci 0000:12:00.2: bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:20:00.0: PCI bridge to [bus 21]
pci 0000:22:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:22:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:22:00.0: reg 0x18: [mem 0xfcd04000-0xfcd04fff 64bit]
pci 0000:22:00.0: reg 0x20: [mem 0xfcd00000-0xfcd03fff 64bit]
pci 0000:22:00.0: supports D1 D2
pci 0000:22:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:20:01.0: PCI bridge to [bus 22]
pci 0000:20:01.0: bridge window [io 0xf000-0xffff]
pci 0000:20:01.0: bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:20:04.0: PCI bridge to [bus 25]
pci 0000:27:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:27:00.0: reg 0x10: [mem 0xfcc00000-0xfcc07fff 64bit]
pci 0000:27:00.0: PME# supported from D3cold
pci 0000:20:06.0: PCI bridge to [bus 27]
pci 0000:20:06.0: bridge window [mem 0xfcc00000-0xfccfffff]
pci 0000:20:07.0: PCI bridge to [bus 28]
pci 0000:29:00.0: [1002:15dd] type 00 class 0x030000
pci 0000:29:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:29:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:29:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:29:00.0: reg 0x24: [mem 0xfcb00000-0xfcb7ffff]
pci 0000:29:00.0: enabling Extended Tags
pci 0000:29:00.0: BAR 0: assigned to efifb
pci 0000:29:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:29:00.1: [1002:15de] type 00 class 0x040300
pci 0000:29:00.1: reg 0x10: [mem 0xfcb80000-0xfcb83fff]
pci 0000:29:00.1: enabling Extended Tags
pci 0000:29:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:29:00.2: [1022:15df] type 00 class 0x108000
pci 0000:29:00.2: reg 0x18: [mem 0xfca00000-0xfcafffff]
pci 0000:29:00.2: reg 0x24: [mem 0xfcb84000-0xfcb85fff]
pci 0000:29:00.2: enabling Extended Tags
pci 0000:29:00.3: [1022:15e0] type 00 class 0x0c0330
pci 0000:29:00.3: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit]
pci 0000:29:00.3: enabling Extended Tags
pci 0000:29:00.3: PME# supported from D0 D3hot D3cold
pci 0000:29:00.4: [1022:15e1] type 00 class 0x0c0330
pci 0000:29:00.4: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit]
pci 0000:29:00.4: enabling Extended Tags
pci 0000:29:00.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 29]
pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcbfffff]
pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:2a:00.0: [1022:7901] type 00 class 0x010601
pci 0000:2a:00.0: reg 0x24: [mem 0xfcf00000-0xfcf007ff]
pci 0000:2a:00.0: enabling Extended Tags
pci 0000:2a:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 2a]
pci 0000:00:08.2: bridge window [mem 0xfcf00000-0xfcffffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:29:00.0: vgaarb: setting as boot VGA device
pci 0000:29:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:29:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x09d82000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0x56d41018-0x57ffffff]
e820: reserve RAM buffer [mem 0x56d4f018-0x57ffffff]
e820: reserve RAM buffer [mem 0x56e06000-0x57ffffff]
e820: reserve RAM buffer [mem 0x56e9e000-0x57ffffff]
e820: reserve RAM buffer [mem 0x5b3b2000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5b651000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff]
e820: reserve RAM buffer [mem 0x41f340000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x60000000-0xdfffffff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: [io 0x0a10-0x0a1f] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] has been reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:20:00.0: PCI bridge to [bus 21]
pci 0000:20:01.0: PCI bridge to [bus 22]
pci 0000:20:01.0: bridge window [io 0xf000-0xffff]
pci 0000:20:01.0: bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:20:04.0: PCI bridge to [bus 25]
pci 0000:20:06.0: PCI bridge to [bus 27]
pci 0000:20:06.0: bridge window [mem 0xfcc00000-0xfccfffff]
pci 0000:20:07.0: PCI bridge to [bus 28]
pci 0000:12:00.2: PCI bridge to [bus 20-28]
pci 0000:12:00.2: bridge window [io 0xf000-0xffff]
pci 0000:12:00.2: bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:00:01.2: PCI bridge to [bus 12-28]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfcc00000-0xfcefffff]
pci 0000:00:08.1: PCI bridge to [bus 29]
pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcbfffff]
pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:08.2: PCI bridge to [bus 2a]
pci 0000:00:08.2: bridge window [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:12: resource 0 [io 0xf000-0xffff]
pci_bus 0000:12: resource 1 [mem 0xfcc00000-0xfcefffff]
pci_bus 0000:20: resource 0 [io 0xf000-0xffff]
pci_bus 0000:20: resource 1 [mem 0xfcc00000-0xfcdfffff]
pci_bus 0000:22: resource 0 [io 0xf000-0xffff]
pci_bus 0000:22: resource 1 [mem 0xfcd00000-0xfcdfffff]
pci_bus 0000:27: resource 1 [mem 0xfcc00000-0xfccfffff]
pci_bus 0000:29: resource 0 [io 0xe000-0xefff]
pci_bus 0000:29: resource 1 [mem 0xfc800000-0xfcbfffff]
pci_bus 0000:29: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:2a: resource 1 [mem 0xfcf00000-0xfcffffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:29:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:29:00.1: D0 power state depends on 0000:29:00.0
pci 0000:29:00.3: extending delay after power-on from D3hot to 20 msec
pci 0000:29:00.4: extending delay after power-on from D3hot to 20 msec
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 83676K
pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter.
fbcon: Taking over console
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.2: Adding to iommu group 1
pci 0000:00:08.0: Adding to iommu group 2
pci 0000:00:08.1: Adding to iommu group 3
pci 0000:00:08.2: Adding to iommu group 4
pci 0000:00:14.0: Adding to iommu group 5
pci 0000:00:14.3: Adding to iommu group 5
pci 0000:00:18.0: Adding to iommu group 6
pci 0000:00:18.1: Adding to iommu group 6
pci 0000:00:18.2: Adding to iommu group 6
pci 0000:00:18.3: Adding to iommu group 6
pci 0000:00:18.4: Adding to iommu group 6
pci 0000:00:18.5: Adding to iommu group 6
pci 0000:00:18.6: Adding to iommu group 6
pci 0000:00:18.7: Adding to iommu group 6
pci 0000:12:00.0: Adding to iommu group 7
pci 0000:12:00.1: Adding to iommu group 7
pci 0000:12:00.2: Adding to iommu group 7
pci 0000:20:00.0: Adding to iommu group 7
pci 0000:20:01.0: Adding to iommu group 7
pci 0000:20:04.0: Adding to iommu group 7
pci 0000:20:06.0: Adding to iommu group 7
pci 0000:20:07.0: Adding to iommu group 7
pci 0000:22:00.0: Adding to iommu group 7
pci 0000:27:00.0: Adding to iommu group 7
pci 0000:29:00.0: Adding to iommu group 8
pci 0000:29:00.0: Using iommu direct mapping
pci 0000:29:00.1: Adding to iommu group 9
pci 0000:29:00.2: Adding to iommu group 9
pci 0000:29:00.3: Adding to iommu group 9
pci 0000:29:00.4: Adding to iommu group 9
pci 0000:2a:00.0: Adding to iommu group 10
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0x4f77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.2: AER: enabled with IRQ 27
pcieport 0000:00:08.2: AER: enabled with IRQ 29
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xe0000000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:12:00.0: xHCI Host Controller
xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:12:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-65-generic xhci-hcd
usb usb1: SerialNumber: 0000:12:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
xhci_hcd 0000:12:00.0: xHCI Host Controller
xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:12:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-65-generic xhci-hcd
usb usb2: SerialNumber: 0000:12:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:27:00.0: xHCI Host Controller
xhci_hcd 0000:27:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:27:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-65-generic xhci-hcd
usb usb3: SerialNumber: 0000:27:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:27:00.0: xHCI Host Controller
xhci_hcd 0000:27:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:27:00.0: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-65-generic xhci-hcd
usb usb4: SerialNumber: 0000:27:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:29:00.3: xHCI Host Controller
xhci_hcd 0000:29:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:29:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.4.0-65-generic xhci-hcd
usb usb5: SerialNumber: 0000:29:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:29:00.3: xHCI Host Controller
xhci_hcd 0000:29:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:29:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.4.0-65-generic xhci-hcd
usb usb6: SerialNumber: 0000:29:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
xhci_hcd 0000:29:00.4: xHCI Host Controller
xhci_hcd 0000:29:00.4: new USB bus registered, assigned bus number 7
xhci_hcd 0000:29:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 5.4.0-65-generic xhci-hcd
usb usb7: SerialNumber: 0000:29:00.4
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
xhci_hcd 0000:29:00.4: xHCI Host Controller
xhci_hcd 0000:29:00.4: new USB bus registered, assigned bus number 8
xhci_hcd 0000:29:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 5.4.0-65-generic xhci-hcd
usb usb8: SerialNumber: 0000:29:00.4
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08101016
microcode: CPU1: patch_level=0x08101016
microcode: CPU2: patch_level=0x08101016
microcode: CPU3: patch_level=0x08101016
microcode: CPU4: patch_level=0x08101016
microcode: CPU5: patch_level=0x08101016
microcode: CPU6: patch_level=0x08101016
microcode: CPU7: patch_level=0x08101016
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (547481191, -27995260)->(520962446, -1476515)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 254611168742f91faa32f8ad6a92fc903145caeb'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 9:919:129
nvmem cmos_nvram0: hash matches
event_source kprobe: hash matches
acpi device:04: hash matches
acpi PNP0C02:01: hash matches
rtc_cmos 00:02: setting system clock to 2021-02-20T13:07:46 UTC (1613826466)
acpi_cpufreq: overriding BIOS provided _PSD data
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2724K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1184K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
acpi device:10: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:01/input/input2
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
ahci 0000:12:00.1: version 3.0
ahci 0000:12:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:12:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:12:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80100 irq 66
ata2: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80180 irq 66
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80300 irq 66
ata6: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80380 irq 66
ata7: DUMMY
ata8: DUMMY
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
cryptd: max_cpu_qlen set to 1000
ahci 0000:2a:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:2a:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host8: ahci
ata9: SATA max UDMA/133 abar m2048@0xfcf00000 port 0xfcf00100 irq 68
libphy: r8169: probed
r8169 0000:22:00.0 eth0: RTL8168h/8111h, 2c:f0:5d:97:6d:f2, XID 541, IRQ 69
r8169 0000:22:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
[drm] amdgpu kernel modesetting enabled.
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add APU node [0x0:0x0]
Finished initializing topology
amdgpu 0000:29:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
amdgpu 0000:29:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
amdgpu 0000:29:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfcb00000 -> 0xfcb7ffff
checking generic (e0000000 7e9000) vs hw (e0000000 10000000)
fb0: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
amdgpu 0000:29:00.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1462:0x7C02 0xC6).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 524288
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
r8169 0000:22:00.0 enp34s0: renamed from eth0
[drm] BIOS signature incorrect 0 0
ATOM BIOS: 113-RAVEN-114
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] VCN jpeg decode is enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:29:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
amdgpu 0000:29:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
amdgpu 0000:29:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=2048M
[drm] RAM width 128bits DDR4
[TTM] Zone kernel: Available graphics memory: 7169482 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[drm] use_doorbell being set to: [true]
amdgpu: [powerplay] hwmgr_sw_init smu backed is smu10_smu
[drm] Found VCN firmware Version ENC: 1.9 DEC: 1 VEP: 0 Revision: 28
[drm] PSP loading VCN firmware
[drm] reserve 0x400000 from 0xf47f800000 for PSP TMR
usb 1-2: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using xhci_hcd
[drm] DM_PPLIB: values for F clock
[drm] DM_PPLIB: 1600000 in kHz, 4399 in mV
[drm] DM_PPLIB: values for DCF clock
[drm] DM_PPLIB: 300000 in kHz, 3649 in mV
[drm] DM_PPLIB: 600000 in kHz, 4074 in mV
[drm] DM_PPLIB: 626000 in kHz, 4250 in mV
[drm] DM_PPLIB: 654000 in kHz, 4399 in mV
[drm] Display Core initialized with v3.2.48!
ata9: SATA link down (SStatus 0 SControl 300)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] VCN decode and encode initialized successfully(under SPG Mode).
kfd kfd: Allocated 3969056 bytes on gart
Topology: Add APU node [0x15dd:0x1002]
kfd kfd: added device 1002:15dd
[drm] fb mappable at 0x60BC1000
[drm] vram apper at 0x60000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:29:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:29:00.0: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:29:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:29:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:29:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:29:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:29:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:29:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:29:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:29:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:29:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:29:00.0: ring sdma0 uses VM inv eng 0 on hub 1
amdgpu 0000:29:00.0: ring vcn_dec uses VM inv eng 1 on hub 1
amdgpu 0000:29:00.0: ring vcn_enc0 uses VM inv eng 4 on hub 1
amdgpu 0000:29:00.0: ring vcn_enc1 uses VM inv eng 5 on hub 1
amdgpu 0000:29:00.0: ring vcn_jpeg uses VM inv eng 6 on hub 1
[drm] Initialized amdgpu 3.35.0 20150101 for 0000:29:00.0 on minor 0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-10: KINGSTON SA400S37240G, SBFKB1E1, max UDMA/133
ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1E1 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-1: New USB device found, idVendor=0b05, idProduct=180d, bcdDevice= 1.03
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: STRIX SOUND CARD
usb 3-1: Manufacturer: ASUSTeK
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:0B05:180D.0001: No inputs registered, leaving
hid-generic 0003:0B05:180D.0001: hidraw0: USB HID v1.00 Device [ASUSTeK STRIX SOUND CARD] on usb-0000:27:00.0-1/input4
usb 1-2: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.10
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-2: SerialNumber: 886942E0
tsc: Refined TSC clocksource calibration: 3603.084 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33efb481cb8, max_idle_ns: 440795276869 ns
clocksource: Switched to clocksource tsc
usb 1-8: new full-speed USB device number 3 using xhci_hcd
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-10: WDC WD10EZEX-08WN4A0, 02.01A02, max UDMA/100
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-08W 1A02 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-8: New USB device found, idVendor=24ae, idProduct=1006, bcdDevice= 1.10
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: Rapoo 2.4G Wireless Touchpad Keyboard
usb 1-8: Manufacturer: RAPOO
input: RAPOO Rapoo 2.4G Wireless Touchpad Keyboard as /devices/pci0000:00/0000:00:01.2/0000:12:00.0/usb1/1-8/1-8:1.0/0003:24AE:1006.0002/input/input4
hid-generic 0003:24AE:1006.0002: input,hidraw1: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Touchpad Keyboard] on usb-0000:12:00.0-8/input0
input: RAPOO Rapoo 2.4G Wireless Touchpad Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:12:00.0/usb1/1-8/1-8:1.1/0003:24AE:1006.0003/input/input6
ata5: SATA link down (SStatus 0 SControl 330)
input: RAPOO Rapoo 2.4G Wireless Touchpad Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:12:00.0/usb1/1-8/1-8:1.1/0003:24AE:1006.0003/input/input7
hid-generic 0003:24AE:1006.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Touchpad Keyboard] on usb-0000:12:00.0-8/input1
input: RAPOO Rapoo 2.4G Wireless Touchpad Keyboard as /devices/pci0000:00/0000:00:01.2/0000:12:00.0/usb1/1-8/1-8:1.2/0003:24AE:1006.0004/input/input8
hid-generic 0003:24AE:1006.0004: input,hidraw3: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Touchpad Keyboard] on usb-0000:12:00.0-8/input2
usb 1-9: new full-speed USB device number 4 using xhci_hcd
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
ata6.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX00 PQ: 0 ANSI: 5
sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg2 type 5
usb 1-9: New USB device found, idVendor=3938, idProduct=1031, bcdDevice= 1.08
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9: Product: 2.4G Wireless Mouse
usb 1-9: Manufacturer: MOSART Semi.
input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:01.2/0000:12:00.0/usb1/1-9/1-9:1.0/0003:3938:1031.0005/input/input9
input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:01.2/0000:12:00.0/usb1/1-9/1-9:1.0/0003:3938:1031.0005/input/input10
hid-generic 0003:3938:1031.0005: input,hiddev1,hidraw4: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:12:00.0-9/input0
raid6: avx2x4 gen() 25297 MB/s
raid6: avx2x4 xor() 14304 MB/s
raid6: avx2x2 gen() 24866 MB/s
raid6: avx2x2 xor() 16376 MB/s
raid6: avx2x1 gen() 19417 MB/s
raid6: avx2x1 xor() 15044 MB/s
raid6: sse2x4 gen() 17762 MB/s
raid6: sse2x4 xor() 10479 MB/s
raid6: sse2x2 gen() 17528 MB/s
raid6: sse2x2 xor() 11149 MB/s
raid6: sse2x1 gen() 8443 MB/s
raid6: sse2x1 xor() 8252 MB/s
raid6: using algorithm avx2x4 gen() 25297 MB/s
raid6: .... xor() 14304 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device fsid 5622c34e-93ab-4114-b871-dceedbb14f62 devid 1 transid 13075 /dev/sda4
BTRFS: device fsid 839ce71e-dbc6-4185-9dd4-8a82711644c0 devid 1 transid 8423 /dev/sda3
BTRFS info (device sda3): disk space caching is enabled
BTRFS info (device sda3): has skinny extents
BTRFS info (device sda3): enabling ssd optimizations
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
BTRFS info (device sda3): disk space caching is enabled
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Starting Helper to synchronize boot up for ifupdown...
systemd[1]: Finished Helper to synchronize boot up for ifupdown.
systemd[1]: Started Journal Service.
systemd-journald[435]: Received client request to flush runtime journal.
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device (046d:0825)
kvm: disabled by bios
input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:01.2/0000:12:00.0/usb1/1-2/1-2:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
kvm: disabled by bios
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Adding 4194300k swap on /dev/sda2. Priority:-2 extents:1 across:4194300k SSFS
BTRFS info (device sda4): disk space caching is enabled
BTRFS info (device sda4): has skinny extents
BTRFS info (device sda4): enabling ssd optimizations
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
snd_hda_intel 0000:29:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:29:00.1: bound 0000:29:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:29:00.1/sound/card2/input12
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:29:00.1/sound/card2/input13
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1613826471.460:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=789 comm="apparmor_parser"
audit: type=1400 audit(1613826471.460:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=789 comm="apparmor_parser"
audit: type=1400 audit(1613826471.460:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=793 comm="apparmor_parser"
audit: type=1400 audit(1613826471.460:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=794 comm="apparmor_parser"
audit: type=1400 audit(1613826471.460:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=788 comm="apparmor_parser"
audit: type=1400 audit(1613826471.460:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=792 comm="apparmor_parser"
audit: type=1400 audit(1613826471.460:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=792 comm="apparmor_parser"
audit: type=1400 audit(1613826471.460:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=792 comm="apparmor_parser"
audit: type=1400 audit(1613826471.464:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=796 comm="apparmor_parser"
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
audit: type=1400 audit(1613826471.464:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=790 comm="apparmor_parser"
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Generic FE-GE Realtek PHY r8169-2200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-2200:00, irq=IGNORE)
r8169 0000:22:00.0 enp34s0: Link is Down
usb 1-2: set resolution quirk: cval->res = 384
usbcore: registered new interface driver snd-usb-audio
r8169 0000:22:00.0 enp34s0: Link is Up - 100Mbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): enp34s0: link becomes ready
perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79500