dmesg - acerswetv1
Linux version 4.16.18-galliumos (reynhout@galliumos) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #1 SMP PREEMPT Sun Jun 23 04:14:45 UTC 2019
Command line: BOOT_IMAGE=/vmlinuz-4.16.18-galliumos root=/dev/mapper/galliumos--vg-root ro quiet splash tpm_tis.interrupts=0 acpi_osi=Linux vt.handoff=1
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000acaadfff] usable
BIOS-e820: [mem 0x00000000acaae000-0x00000000acbf1fff] reserved
BIOS-e820: [mem 0x00000000acbf2000-0x00000000acbfcfff] usable
BIOS-e820: [mem 0x00000000acbfd000-0x00000000acbfdfff] ACPI data
BIOS-e820: [mem 0x00000000acbfe000-0x00000000acf33fff] usable
BIOS-e820: [mem 0x00000000acf34000-0x00000000af9fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001cf5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.70 by EDK II
efi: ACPI 2.0=0xacf46000 SMBIOS=0xacf34000 MEMATTR=0xac6b5318
SMBIOS 2.8 present.
DMI: GOOGLE Parrot/Parrot, BIOS MrChromebox-4.12 06/04/2020
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1cf600 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0AD000000 mask FFF000000 uncachable
1 base 0AE000000 mask FFE000000 uncachable
2 base 0B0000000 mask FF0000000 uncachable
3 base 0C0000000 mask FF0000000 uncachable
4 base 0D0000000 mask FF0000000 write-combining
5 base 0E0000000 mask FE0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: last_pfn = 0xacf34 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 99000 size 24576
reserving inaccessible SNB gfx pages
BRK [0x181723000, 0x181723fff] PGTABLE
BRK [0x181724000, 0x181724fff] PGTABLE
BRK [0x181725000, 0x181725fff] PGTABLE
BRK [0x181726000, 0x181726fff] PGTABLE
BRK [0x181727000, 0x181727fff] PGTABLE
BRK [0x181728000, 0x181728fff] PGTABLE
BRK [0x181729000, 0x181729fff] PGTABLE
BRK [0x18172a000, 0x18172afff] PGTABLE
BRK [0x18172b000, 0x18172bfff] PGTABLE
BRK [0x18172c000, 0x18172cfff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x3e5f1000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000ACF46000 000024 (v02 COREv4)
ACPI: XSDT 0x00000000ACBFDF18 00005C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
ACPI: FACP 0x00000000ACF49610 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200110)
ACPI: DSDT 0x00000000ACF46280 003388 (v02 COREv4 COREBOOT 20110725 INTL 20200110)
ACPI: FACS 0x00000000ACF46240 000040
ACPI: FACS 0x00000000ACF46240 000040
ACPI: SSDT 0x00000000ACF49730 000C9C (v02 COREv4 COREBOOT 0000002A CORE 20200110)
ACPI: MCFG 0x00000000ACF4A3D0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
ACPI: TCPA 0x00000000ACF4A410 000032 (v02 COREv4 COREBOOT 00000000 CORE 20200110)
ACPI: APIC 0x00000000ACF4A450 00005C (v03 COREv4 COREBOOT 00000000 CORE 20200110)
ACPI: HPET 0x00000000ACF4C4B0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
ACPI: BGRT 0x00000000ACBFD018 000038 (v00 INTEL EDK2 00001720 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001cf5fffff]
NODE_DATA(0) allocated [mem 0x1cf5fa000-0x1cf5fdfff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000001cf5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x000000003fffffff]
node 0: [mem 0x0000000040200000-0x00000000acaadfff]
node 0: [mem 0x00000000acbf2000-0x00000000acbfcfff]
node 0: [mem 0x00000000acbfe000-0x00000000acf33fff]
node 0: [mem 0x0000000100000000-0x00000001cf5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000001cf5fffff]
On node 0 totalpages: 1556366
DMA zone: 64 pages used for memmap
DMA zone: 1199 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 10984 pages used for memmap
DMA32 zone: 702959 pages, LIFO batch:31
Normal zone: 13272 pages used for memmap
Normal zone: 849408 pages, LIFO batch:31
Reserved but unavailable: 102 pages
Reserving Intel graphics memory at [mem 0xada00000-0xaf9fffff]
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xacaae000-0xacbf1fff]
PM: Registered nosave memory: [mem 0xacbfd000-0xacbfdfff]
PM: Registered nosave memory: [mem 0xacf34000-0xaf9fffff]
PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
e820: [mem 0xafa00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
random: get_random_bytes called from start_kernel+0x84/0x45f with crng_init=0
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
percpu: Embedded 45 pages/cpu @ (ptrval) s146328 r8192 d29800 u1048576
pcpu-alloc: s146328 r8192 d29800 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists, mobility grouping on. Total pages: 1530847
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.18-galliumos root=/dev/mapper/galliumos--vg-root ro quiet splash tpm_tis.interrupts=0 acpi_osi=Linux vt.handoff=1
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 5989652K/6225464K available (10252K kernel code, 1322K rwdata, 3336K rodata, 1540K init, 1012K bss, 235812K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 33935 entries in 133 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180105
ACPI: 2 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 1097.412 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xfd18c96dca, max_idle_ns: 440795209714 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 2194.82 BogoMIPS (lpj=1097412)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Spectre V2 : Enabling Restricted Speculation for firmware calls
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 32K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
smp: Brought up 1 node, 2 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 2 processors activated (4389.64 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 14:45:38, date: 02/15/21
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1613400338.036:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0xafa00001-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
pci 0000:00:04.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xe0711000-0xe071100f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xe070e000-0xe070e3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe0708000-0xe070bfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xe070f000-0xe070f3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x1060-0x1067]
pci 0000:00:1f.2: reg 0x14: [io 0x1070-0x1073]
pci 0000:00:1f.2: reg 0x18: [io 0x1068-0x106f]
pci 0000:00:1f.2: reg 0x1c: [io 0x1074-0x1077]
pci 0000:00:1f.2: reg 0x20: [io 0x1040-0x105f]
pci 0000:00:1f.2: reg 0x24: [mem 0xe070d000-0xe070d7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xe0710000-0xe07100ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xe070c000-0xe070cfff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [168c:0034] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
pci 0000:03:00.0: [14e4:16b5] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xe0510000-0xe051ffff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0xe0600000-0xe06007ff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: [14e4:16bc] type 00 class 0x080501
pci 0000:03:00.1: reg 0x10: [mem 0xe0520000-0xe052ffff 64bit pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xacaae000-0xafffffff]
e820: reserve RAM buffer [mem 0xacbfd000-0xafffffff]
e820: reserve RAM buffer [mem 0xacf34000-0xafffffff]
e820: reserve RAM buffer [mem 0x1cf600000-0x1cfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0x20000000-0x201fffff] has been reserved
system 00:00: [mem 0x40000000-0x401fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0x0480-0x04bf] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b GGL0303 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0xafa00001-0xefffffff window]
pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:02: resource 1 [mem 0xe0400000-0xe04fffff]
pci_bus 0000:03: resource 1 [mem 0xe0600000-0xe06fffff]
pci_bus 0000:03: resource 2 [mem 0xe0500000-0xe05fffff 64bit pref]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26676K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa4f30000-0xa8f30000] (64MB) mapped at [ (ptrval)- (ptrval)]
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=21 bucket_order=0
zbud: loaded
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler mq-deadline registered (default)
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.0: Signaling PME with IRQ 24
pcieport 0000:00:1c.0: Signaling PME with IRQ 25
pcieport 0000:00:1c.1: Signaling PME with IRQ 26
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [TPAD]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (31 C)
Linux agpgart interface v0.103
random: fast init done
[Firmware Bug]: battery: (dis)charge rate invalid.
ACPI: Battery Slot [BATX] (battery present)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 21, io mem 0xe070e000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.16.18-galliumos ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 19, io mem 0xe070f000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.16.18-galliumos ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x206a7, pf=0x10, revision=0x2f
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1055158148, 0)->(1051725429, 3432719)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 1293feda390bd305e50886457fa26c268bafd3b9'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 9:821:788
rtc_cmos 00:03: setting system clock to 2021-02-15 14:45:39 UTC (1613400339)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1540K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2008K
Freeing unused kernel memory: 760K
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
sdhci-pci 0000:03:00.1: SDHCI controller found [14e4:16bc] (rev 10)
PTP clock support registered
cryptd: max_cpu_qlen set to 1000
mmc0: SDHCI controller on PCI [0000:03:00.1] using ADMA 64-bit
libata version 3.00 loaded.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
tg3.c:v3.137 (May 11, 2014)
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
scsi host0: ahci
tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:ce:fb:07
tg3 0000:03:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
scsi host1: ahci
scsi host2: ahci
tg3 0000:03:00.0 enp3s0f0: renamed from eth0
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xe070d000 port 0xe070d100 irq 27
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:31: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
fbcon: inteldrmfb (fb0) is primary device
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
ata1.00: ATA-8: KINGSTON SV300S37A120G, 506ABBF0, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1.1: string descriptor 0 read error: -22
usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: new high-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 1097.506 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfd1e55c821, max_idle_ns: 440795210298 ns
clocksource: Switched to clocksource tsc
usb 1-1.3: New USB device found, idVendor=064e, idProduct=d251
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: HD WebCam
usb 1-1.3: Manufacturer: SuYin
usb 1-1.3: SerialNumber: HF1016-A21U-OV02-VA-R01.00.03
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
random: lvm: uninitialized urandom read (4 bytes read)
random: plymouthd: uninitialized urandom read (8 bytes read)
random: plymouthd: uninitialized urandom read (8 bytes read)
random: crng init done
NET: Registered protocol family 38
raid6: sse2x1 gen() 3296 MB/s
raid6: sse2x1 xor() 2308 MB/s
raid6: sse2x2 gen() 3898 MB/s
raid6: sse2x2 xor() 2632 MB/s
raid6: sse2x4 gen() 4613 MB/s
raid6: sse2x4 xor() 3054 MB/s
raid6: using algorithm sse2x4 gen() 4613 MB/s
raid6: .... xor() 3054 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 5724.000 MB/sec
generic_sse: 5300.000 MB/sec
xor: using function: prefetch64-sse (5724.000 MB/sec)
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Swap.
EXT4-fs (dm-1): re-mounted. Opts: discard,errors=remount-ro
systemd-journald[394]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20180105/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180105/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180105/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180105/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
media: Linux media interface: v0.10
Linux video capture interface: v2.00
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
usbcore: registered new interface driver btusb
usbcore: registered new interface driver ath3k
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard
uvcvideo: Found UVC 1.00 device HD WebCam (064e:d251)
uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-1.3:1.0: Entity type for entity Extension 6 was not initialized!
uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 1-1.1: USB disconnect, device number 3
usb 1-1.1: new full-speed USB device number 5 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -22
usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
audit: type=1400 audit(1613400358.194:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=537 comm="apparmor_parser"
audit: type=1400 audit(1613400358.194:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=537 comm="apparmor_parser"
audit: type=1400 audit(1613400358.194:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=537 comm="apparmor_parser"
audit: type=1400 audit(1613400358.218:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=535 comm="apparmor_parser"
audit: type=1400 audit(1613400358.218:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=535 comm="apparmor_parser"
audit: type=1400 audit(1613400358.219:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=535 comm="apparmor_parser"
audit: type=1400 audit(1613400358.220:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=535 comm="apparmor_parser"
audit: type=1400 audit(1613400358.226:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=538 comm="apparmor_parser"
audit: type=1400 audit(1613400358.236:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=541 comm="apparmor_parser"
audit: type=1400 audit(1613400358.257:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=540 comm="apparmor_parser"
zram: Added device: zram0
zram0: detected capacity change from 0 to 9278369792
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
Adding 9060904k swap on /dev/zram0. Priority:-2 extents:1 across:9060904k SSFS
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
ath: phy0: ASPM enabled: 0x43
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x1b
snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffa6a701400000, irq=17
cyapa 7-0067: 7-0067 supply vcc not found, using dummy regulator
input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:1f.3/i2c-7/7-0067/input/input11
ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp3s0f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp3s0f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
aufs 4.16-20180409
wlp2s0: authenticate with e4:f4:c6:7e:d1:f0
wlp2s0: send auth to e4:f4:c6:7e:d1:f0 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e4:f4:c6:7e:d1:f0 (try 1/3)
wlp2s0: RX AssocResp from e4:f4:c6:7e:d1:f0 (capab=0x411 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11