dmesg - Kston
microcode: microcode updated early to revision 0x21, date = 2019-02-13
Linux version 5.4.0-52-generic (buildd@lgw01-amd64-060) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #57-Ubuntu SMP Thu Oct 15 10:57:00 UTC 2020 (Ubuntu 5.4.0-52.57-generic 5.4.65)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000caf82fff] usable
BIOS-e820: [mem 0x00000000caf83000-0x00000000cafc5fff] ACPI NVS
BIOS-e820: [mem 0x00000000cafc6000-0x00000000cb60bfff] usable
BIOS-e820: [mem 0x00000000cb60c000-0x00000000cb7f1fff] reserved
BIOS-e820: [mem 0x00000000cb7f2000-0x00000000da4c0fff] usable
BIOS-e820: [mem 0x00000000da4c1000-0x00000000da7d3fff] reserved
BIOS-e820: [mem 0x00000000da7d4000-0x00000000da901fff] usable
BIOS-e820: [mem 0x00000000da902000-0x00000000dac22fff] ACPI NVS
BIOS-e820: [mem 0x00000000dac23000-0x00000000daffefff] reserved
BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xcadd8018-0xcade8057] usable ==> usable
e820: update [mem 0xcadd8018-0xcade8057] usable ==> usable
e820: update [mem 0xcadc9018-0xcadd7057] usable ==> usable
e820: update [mem 0xcadc9018-0xcadd7057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
reserve setup_data: [mem 0x0000000040005000-0x00000000cadc9017] usable
reserve setup_data: [mem 0x00000000cadc9018-0x00000000cadd7057] usable
reserve setup_data: [mem 0x00000000cadd7058-0x00000000cadd8017] usable
reserve setup_data: [mem 0x00000000cadd8018-0x00000000cade8057] usable
reserve setup_data: [mem 0x00000000cade8058-0x00000000caf82fff] usable
reserve setup_data: [mem 0x00000000caf83000-0x00000000cafc5fff] ACPI NVS
reserve setup_data: [mem 0x00000000cafc6000-0x00000000cb60bfff] usable
reserve setup_data: [mem 0x00000000cb60c000-0x00000000cb7f1fff] reserved
reserve setup_data: [mem 0x00000000cb7f2000-0x00000000da4c0fff] usable
reserve setup_data: [mem 0x00000000da4c1000-0x00000000da7d3fff] reserved
reserve setup_data: [mem 0x00000000da7d4000-0x00000000da901fff] usable
reserve setup_data: [mem 0x00000000da902000-0x00000000dac22fff] ACPI NVS
reserve setup_data: [mem 0x00000000dac23000-0x00000000daffefff] reserved
reserve setup_data: [mem 0x00000000dafff000-0x00000000daffffff] usable
reserve setup_data: [mem 0x00000000db000000-0x00000000df9fffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000021f5fffff] usable
efi: EFI v2.31 by American Megatrends
efi: ESRT=0xdaf82818 ACPI=0xda986000 ACPI 2.0=0xda986000 SMBIOS=0xf04c0 MPS=0xfd440
secureboot: Secure boot disabled
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./OEM, BIOS 4.6.5 06/18/2019
tsc: Fast TSC calibration using PIT
tsc: Detected 1696.180 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x21f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FE0000000 write-back
2 base 0E0000000 mask FE0000000 uncachable
3 base 0DC000000 mask FFC000000 uncachable
4 base 0DB800000 mask FFF800000 uncachable
5 base 21F800000 mask FFF800000 uncachable
6 base 21F600000 mask FFFE00000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 8110M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 9 lose cover RAM: 0G
e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
last_pfn = 0xdb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd700-0x000fd70f]
esrt: Reserving ESRT space from 0x00000000daf82818 to 0x00000000daf82850.
check: Scanning 1 areas for low memory corruption
secureboot: Secure boot disabled
RAMDISK: [mem 0x3d0b9000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DA986000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DA986078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DA98FFB0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DA986178 009E31 (v02 ALASKA A M I 00000017 INTL 20051117)
ACPI: FACS 0x00000000DAC21080 000040
ACPI: APIC 0x00000000DA9900C0 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DA990138 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DA990180 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DA9901C0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DA9901F8 000495 (v01 IdeRef IdeTable 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DA990690 0008A2 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DA990F38 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 0x00000000DA991A60 0000B0 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
NODE_DATA(0) allocated [mem 0x21f5ce000-0x21f5f8fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021f5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x0000000040003fff]
node 0: [mem 0x0000000040005000-0x00000000caf82fff]
node 0: [mem 0x00000000cafc6000-0x00000000cb60bfff]
node 0: [mem 0x00000000cb7f2000-0x00000000da4c0fff]
node 0: [mem 0x00000000da7d4000-0x00000000da901fff]
node 0: [mem 0x00000000dafff000-0x00000000daffffff]
node 0: [mem 0x0000000100000000-0x000000021f5fffff]
Zeroed struct page in unavailable ranges: 26780 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000021f5fffff]
On node 0 totalpages: 2070372
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13896 pages used for memmap
DMA32 zone: 889286 pages, LIFO batch:63
Normal zone: 18392 pages used for memmap
Normal zone: 1177088 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0xcadc9000-0xcadc9fff]
PM: Registered nosave memory: [mem 0xcadd7000-0xcadd7fff]
PM: Registered nosave memory: [mem 0xcadd8000-0xcadd8fff]
PM: Registered nosave memory: [mem 0xcade8000-0xcade8fff]
PM: Registered nosave memory: [mem 0xcaf83000-0xcafc5fff]
PM: Registered nosave memory: [mem 0xcb60c000-0xcb7f1fff]
PM: Registered nosave memory: [mem 0xda4c1000-0xda7d3fff]
PM: Registered nosave memory: [mem 0xda902000-0xdac22fff]
PM: Registered nosave memory: [mem 0xdac23000-0xdaffefff]
PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 2037996
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7802688K/8281488K available (14339K kernel code, 2398K rwdata, 4956K rodata, 2716K init, 4988K bss, 478800K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44527 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000da77a000 end: 0x000000da786fff
DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x18730e9af02, max_idle_ns: 440795244530 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.36 BogoMIPS (lpj=6784720)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
SRBDS: Vulnerable: No microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2
MDS CPU bug present and SMT on, data leak possible. See for more details.
#3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (13569.44 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xcaf83000-0xcafc5fff] (274432 bytes)
PM: Registering ACPI NVS region [mem 0xda902000-0xdac22fff] (3280896 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 12:40:42, date: 2021-01-25
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1611578442.044:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9B41D5B5F000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9B41D5B57400 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9B41D5681400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 17 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7e07000-0xf7e073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7e00000-0xf7e03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7e06000-0xf7e063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xf110-0xf117]
pci 0000:00:1f.2: reg 0x14: [io 0xf100-0xf103]
pci 0000:00:1f.2: reg 0x18: [io 0xf0f0-0xf0f7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0e0-0xf0e3]
pci 0000:00:1f.2: reg 0x20: [io 0xf0d0-0xf0df]
pci 0000:00:1f.2: reg 0x24: [io 0xf0c0-0xf0cf]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7e05000-0xf7e050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.5: [8086:1c09] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.5: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.5: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.5: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.5: reg 0x20: [io 0xf070-0xf07f]
pci 0000:00:1f.5: reg 0x24: [io 0xf060-0xf06f]
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xf7c20000-0xf7c2ffff pref]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xcadc9018-0xcbffffff]
e820: reserve RAM buffer [mem 0xcadd8018-0xcbffffff]
e820: reserve RAM buffer [mem 0xcaf83000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb60c000-0xcbffffff]
e820: reserve RAM buffer [mem 0xda4c1000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda902000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x1000-0x100f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] has been reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a1f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xdfa00000-0xdfa00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 24524 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 23396 usecs
pci 0000:01:00.0: CLS mismatch (64 != 32), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 48404K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xc6dc9000-0xcadc9000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0xe0000000, using 1200k, total 1200k
efifb: mode is 640x480x32, linelength=2560, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e07000
ata1.01: ATA-11: Kston 128GB, SBFQBB.3, max UDMA/133
ata1.01: 250069680 sectors, multi 16: LBA48 NCQ (depth 0/32)
scsi 0:0:1:0: Direct-Access ATA Kston 128GB BB.3 PQ: 0 ANSI: 5
scsi 0:0:1:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-52-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sda: sda1 sda2
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
sd 0:0:1:0: [sda] Attached SCSI disk
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e06000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-52-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x306a9, pf=0x10, revision=0x21
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (990231795, 279204)->(996421547, -5910548)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 9587b8cca0bd5e3ad1c932f4859e23820e37ff94'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 5:253:684
mem full: hash matches
rtc_cmos 00:02: setting system clock to 2021-01-25T12:40:43 UTC (1611578443)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2716K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1188K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
usb 1-1: new high-speed USB device number 2 using ehci-pci
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
libphy: r8169: probed
r8169 0000:01:00.0 eth0: RTL8168evl/8111evl, 00:e0:4c:4c:90:7f, XID 2c9, IRQ 28
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb 2-1: new high-speed USB device number 2 using ehci-pci
r8169 0000:01:00.0 enp1s0: renamed from eth0
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
fbcon: Taking over console
Console: switching to colour frame buffer device 80x30
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
tsc: Refined TSC clocksource calibration: 1696.147 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872ef8535c, max_idle_ns: 440795255355 ns
clocksource: Switched to clocksource tsc
systemd[1]: Inserted module 'autofs4'
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 1-1.1: New USB device found, idVendor=058f, idProduct=6254, bcdDevice= 1.00
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 4 ports detected
usb 1-1.2: new high-speed USB device number 4 using ehci-pci
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
systemd[1]: Created slice system-code\x2dserver.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
usb 1-1.2: New USB device found, idVendor=0951, idProduct=162d, bcdDevice= 1.00
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: DataTraveler 102
usb 1-1.2: Manufacturer: Kingston
usb 1-1.2: SerialNumber: 0014857749E3BAB147F8002F
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
lp: driver loaded but no devices found
systemd[1]: Finished Load/Save Random Seed.
ppdev: user-space parallel port driver
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
usb 1-1.3: new full-speed USB device number 5 using ehci-pci
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Started Journal Service.
lp0: using parport0 (interrupt-driven).
systemd-journald[262]: Received client request to flush runtime journal.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
usb 1-1.3: New USB device found, idVendor=04fc, idProduct=0801, bcdDevice=16.11
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: USB Multi-Smart Mouse
usb 1-1.3: Manufacturer: MLK
usb 1-1.1.3: new low-speed USB device number 6 using ehci-pci
usb 1-1.1.3: New USB device found, idVendor=0a81, idProduct=0101, bcdDevice= 1.10
usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.3: Product: USB Keyboard
usb 1-1.1.3: Manufacturer: CHESEN
usb-storage 1-1.2:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-1.2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
cryptd: max_cpu_qlen set to 1000
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
checking generic (e0000000 12c000) vs hw (e0000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
ath9k 0000:02:00.0: enabling device (0100 -> 0102)
ath: phy0: ASPM enabled: 0x43
ath: EEPROM regdomain: 0x6a
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffb57e40480000, irq=18
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
input: MLK USB Multi-Smart Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:04FC:0801.0001/input/input3
input: MLK USB Multi-Smart Mouse Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:04FC:0801.0001/input/input4
scsi 4:0:0:0: Direct-Access Kingston DataTraveler 102 PMAP PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 7835648 512-byte logical blocks: (4.01 GB/3.74 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
hid-generic 0003:04FC:0801.0001: input,hidraw0: USB HID v1.11 Mouse [MLK USB Multi-Smart Mouse] on usb-0000:00:1a.0-1.3/input0
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/0003:0A81:0101.0002/input/input5
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
hid-generic 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1a.0-1.1.3/input0
input: CHESEN USB Keyboard System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:0A81:0101.0003/input/input6
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
input: CHESEN USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:0A81:0101.0003/input/input7
hid-generic 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1a.0-1.1.3/input1
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
audit: type=1400 audit(1611578446.214:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=516 comm="apparmor_parser"
audit: type=1400 audit(1611578446.214:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=515 comm="apparmor_parser"
audit: type=1400 audit(1611578446.214:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=517 comm="apparmor_parser"
audit: type=1400 audit(1611578446.226:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=514 comm="apparmor_parser"
audit: type=1400 audit(1611578446.226:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=514 comm="apparmor_parser"
audit: type=1400 audit(1611578446.226:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=514 comm="apparmor_parser"
audit: type=1400 audit(1611578446.230:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=522 comm="apparmor_parser"
audit: type=1400 audit(1611578446.230:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=522 comm="apparmor_parser"
audit: type=1400 audit(1611578446.230:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=522 comm="apparmor_parser"
kauditd_printk_skb: 25 callbacks suppressed
audit: type=1400 audit(1611578448.026:36): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=720 comm="cups-browsed" capability=23 capname="sys_nice"
RTL8211E Gigabit Ethernet r8169-100:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
r8169 0000:01:00.0 enp1s0: Link is Down
aufs 5.4.3-20200302
r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
wlp2s0: authenticate with 88:c3:97:c8:a7:7b
wlp2s0: send auth to 88:c3:97:c8:a7:7b (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 88:c3:97:c8:a7:7b (try 1/3)
wlp2s0: RX AssocResp from 88:c3:97:c8:a7:7b (capab=0x1511 status=0 aid=6)
wlp2s0: associated
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ath: regdomain 0x809c dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
wlp2s0: Limiting TX power to 30 (33 - 3) dBm as advertised by 88:c3:97:c8:a7:7b
rfkill: input handler disabled
rfkill: input handler enabled
rfkill: input handler disabled
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
audit: type=1400 audit(1611578467.318:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/10707/usr/lib/snapd/snap-confine" pid=2295 comm="apparmor_parser"
audit: type=1400 audit(1611578467.318:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/10707/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2295 comm="apparmor_parser"
audit: type=1400 audit(1611578468.538:39): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.snap-store" pid=2346 comm="apparmor_parser"
audit: type=1400 audit(1611578468.562:40): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=2367 comm="apparmor_parser"
audit: type=1400 audit(1611578468.570:41): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=2368 comm="apparmor_parser"
audit: type=1400 audit(1611578468.594:42): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.snap-store" pid=2366 comm="apparmor_parser"
audit: type=1400 audit(1611578470.782:43): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/10707/usr/lib/snapd/snap-confine" pid=2442 comm="apparmor_parser"
audit: type=1400 audit(1611578470.806:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/10707/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2442 comm="apparmor_parser"
audit: type=1400 audit(1611578471.942:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.snap-store" pid=2445 comm="apparmor_parser"
audit: type=1400 audit(1611578471.990:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=2447 comm="apparmor_parser"
kauditd_printk_skb: 2 callbacks suppressed
audit: type=1400 audit(1611578491.002:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=2914 comm="apparmor_parser"
audit: type=1400 audit(1611578491.174:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.snap-store" pid=2912 comm="apparmor_parser"
audit: type=1400 audit(1611578491.318:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=2913 comm="apparmor_parser"
audit: type=1400 audit(1611578491.678:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.snap-store" pid=2911 comm="apparmor_parser"
audit: type=1400 audit(1611578492.842:53): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/10707/usr/lib/snapd/snap-confine" pid=2955 comm="apparmor_parser"
audit: type=1400 audit(1611578492.842:54): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/10707/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2955 comm="apparmor_parser"
audit: type=1400 audit(1611578493.290:55): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.hook.configure" pid=2958 comm="apparmor_parser"
audit: type=1400 audit(1611578494.098:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.snap-store" pid=2959 comm="apparmor_parser"
audit: type=1400 audit(1611578494.382:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.snap-store" pid=2957 comm="apparmor_parser"
audit: type=1400 audit(1611578494.414:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=2960 comm="apparmor_parser"
kauditd_printk_skb: 1 callbacks suppressed
audit: type=1400 audit(1611578496.130:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.hook.configure" pid=3093 comm="apparmor_parser"
audit: type=1400 audit(1611578496.866:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=3095 comm="apparmor_parser"
audit: type=1400 audit(1611578496.914:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.snap-store" pid=3094 comm="apparmor_parser"
audit: type=1400 audit(1611578497.046:63): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.snap-store" pid=3092 comm="apparmor_parser"
audit: type=1400 audit(1611578497.154:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=3096 comm="apparmor_parser"