dmesg - test-ramspeed-average-all
microcode: microcode updated early to revision 0xe2, date = 2020-07-14
Linux version 5.4.0-62-lowlatency (buildd@lgw01-amd64-045) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #70-Ubuntu SMP PREEMPT Tue Jan 12 13:48:21 UTC 2021 (Ubuntu 5.4.0-62.70-lowlatency 5.4.78)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000059329fff] usable
BIOS-e820: [mem 0x000000005932a000-0x000000005932afff] ACPI NVS
BIOS-e820: [mem 0x000000005932b000-0x0000000059374fff] reserved
BIOS-e820: [mem 0x0000000059375000-0x00000000593c6fff] usable
BIOS-e820: [mem 0x00000000593c7000-0x0000000059ac3fff] reserved
BIOS-e820: [mem 0x0000000059ac4000-0x0000000076e45fff] usable
BIOS-e820: [mem 0x0000000076e46000-0x00000000777adfff] reserved
BIOS-e820: [mem 0x00000000777ae000-0x0000000077f99fff] ACPI NVS
BIOS-e820: [mem 0x0000000077f9a000-0x0000000077ffefff] ACPI data
BIOS-e820: [mem 0x0000000077fff000-0x0000000077ffffff] usable
BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000975ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z170 Pro4, BIOS P3.70 06/23/2016
tsc: Detected 4000.000 MHz processor
tsc: Detected 3999.984 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x976000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 007C000000 mask 7FFC000000 uncachable
2 base 007A000000 mask 7FFE000000 uncachable
3 base 0079000000 mask 7FFF000000 uncachable
4 base 0078800000 mask 7FFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x78000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fc660-0x000fc66f]
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
RAMDISK: [mem 0x32081000-0x35037fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000077F31098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x0000000077F52160 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x0000000077F311E8 020F74 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x0000000077F99F80 000040
ACPI: APIC 0x0000000077F52270 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x0000000077F52330 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x0000000077F52378 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x0000000077F52418 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x0000000077F52458 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
ACPI: SSDT 0x0000000077F52490 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x0000000077F52800 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000077F52898 00002B (v02 INTEL UsbCTabl 00001000 INTL 20120913)
ACPI: DBGP 0x0000000077F528C8 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x0000000077F52900 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000077F52958 000619 (v02 INTEL xh_rvp08 00000000 INTL 20120913)
ACPI: AAFT 0x0000000077F52F78 0004FE (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: SSDT 0x0000000077F53478 005212 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x0000000077F58690 000042 (v01 00000000 00000000)
ACPI: SSDT 0x0000000077F586D8 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: DMAR 0x0000000077F59530 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: ASF! 0x0000000077F595D8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000975ffffff]
NODE_DATA(0) allocated [mem 0x975fd5000-0x975ffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000975ffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x0000000059329fff]
node 0: [mem 0x0000000059375000-0x00000000593c6fff]
node 0: [mem 0x0000000059ac4000-0x0000000076e45fff]
node 0: [mem 0x0000000077fff000-0x0000000077ffffff]
node 0: [mem 0x0000000100000000-0x0000000975ffffff]
Zeroed struct page in unavailable ranges: 14694 pages
Initmem setup node 0 [mem 0x0000000000001000-0x0000000975ffffff]
On node 0 totalpages: 9356954
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 7516 pages used for memmap
DMA32 zone: 481023 pages, LIFO batch:63
Normal zone: 138624 pages used for memmap
Normal zone: 8871936 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x79000000-0x88ffffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x5932a000-0x5932afff]
PM: Registered nosave memory: [mem 0x5932b000-0x59374fff]
PM: Registered nosave memory: [mem 0x593c7000-0x59ac3fff]
PM: Registered nosave memory: [mem 0x76e46000-0x777adfff]
PM: Registered nosave memory: [mem 0x777ae000-0x77f99fff]
PM: Registered nosave memory: [mem 0x77f9a000-0x77ffefff]
PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
PM: Registered nosave memory: [mem 0x78100000-0x78ffffff]
PM: Registered nosave memory: [mem 0x79000000-0x88ffffff]
PM: Registered nosave memory: [mem 0x89000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x89000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 9210729
Policy zone: Normal
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 36594104K/37427816K available (14339K kernel code, 2403K rwdata, 4968K rodata, 2652K init, 5048K bss, 833712K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44600 entries in 175 pages
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x00000077528000 end: 0x00000077547fff
DMAR: RMRR base: 0x00000078800000 end: 0x00000088ffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x73509d9fa88, max_idle_ns: 881590914879 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7999.96 BogoMIPS (lpj=3999984)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
TAA: Mitigation: Clear CPU buffers
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 36K
smpboot: CPU0: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4
MDS CPU bug present and SMT on, data leak possible. See for more details.
TAA CPU bug present and SMT on, data leak possible. See for more details.
#5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (63999.74 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x5932a000-0x5932afff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x777ae000-0x77f99fff] (8306688 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 17:18:26, date: 2021-01-20
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1611163106.020:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
KVM setup pv remote TLB flush
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF930B8A4CB000 0007AA (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF930B8A9B5C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF930B8A4CF000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF930B8A4D2A00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x89000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf130000-0xdf13ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf14e000-0xdf14efff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf14d000-0xdf14dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf148000-0xdf149fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf14c000-0xdf14c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf14b000-0xdf14b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf144000-0xdf147fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf140000-0xdf143fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf120000-0xdf12ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf14a000-0xdf14a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf100000-0xdf11ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [144d:a802] type 00 class 0x010802
pci 0000:03:00.0: reg 0x10: [mem 0xdf000000-0xdf003fff 64bit]
pci 0000:03:00.0: reg 0x18: [io 0xe000-0xe0ff]
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci 0000:00:1d.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1d.0: bridge window [mem 0xdf000000-0xdf0fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
e820: reserve RAM buffer [mem 0x5932a000-0x5bffffff]
e820: reserve RAM buffer [mem 0x593c7000-0x5bffffff]
e820: reserve RAM buffer [mem 0x76e46000-0x77ffffff]
e820: reserve RAM buffer [mem 0x976000000-0x977ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0280-0x028f] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x02a0-0x02af] has been reserved
system 00:00: [io 0x02b0-0x02bf] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x1800-0x18fe] has been reserved
system 00:03: [io 0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0800-0x087f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0xff00-0xfffe] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1b.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci 0000:00:1d.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1d.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x89000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xdf000000-0xdf0fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 48860K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x72e46000-0x76e46000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:1b.0: PME: Signaling with IRQ 122
pcieport 0000:00:1c.0: PME: Signaling with IRQ 123
pcieport 0000:00:1d.0: PME: Signaling with IRQ 124
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0x00000000e53e7bb5, using 8128k, total 8128k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-62-lowlatency xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-62-lowlatency xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc rtc0: invalid alarm value: 2021-01-20T17:18:65
rtc_cmos 00:05: registered as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x506e3, pf=0x2, revision=0xe2
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (425858170, 3396985)->(433317431, -4062276)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: de031cbcb6c275fa270ed03239540539b757b42e'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 5:546:340
usb usb1-port11: hash matches
rtc_cmos 00:05: setting system clock to 2021-01-20T17:18:27 UTC (1611163107)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2652K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1176K
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ahci 0000:00:17.0: version 3.0
nvme nvme0: pci function 0000:03:00.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b100 irq 127
ata2: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b180 irq 127
ata3: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b200 irq 127
ata4: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b280 irq 127
ata5: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b300 irq 127
ata6: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b380 irq 127
nvme nvme0: 8/0/0 default/read/poll queues
nvme0n1: p1 p2 < p5 >
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
usb 1-2: new low-speed USB device number 2 using xhci_hcd
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 70:85:c2:0c:4a:f4
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
usb 1-2: New USB device found, idVendor=03f0, idProduct=094a, bcdDevice= 1.00
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: HP USB Optical Mouse
usb 1-2: Manufacturer: PixArt
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata5.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 4:0:0:0: [sda] 4096-byte physical blocks
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 4:0:0:0: [sda] Attached SCSI disk
usb 2-7: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-7: New USB device found, idVendor=1058, idProduct=107c, bcdDevice=10.65
usb 2-7: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-7: Product: Elements 107C
usb 2-7: Manufacturer: Western Digital
usb 2-7: SerialNumber: 57434334453058544E313252
usb-storage 2-7:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-7:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 1-3: new high-speed USB device number 3 using xhci_hcd
usb 1-3: New USB device found, idVendor=148f, idProduct=7601, bcdDevice= 0.00
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: 802.11 n WLAN
usb 1-3: Manufacturer: MediaTek
usb 1-3: SerialNumber: 1.0
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:03F0:094A.0001/input/input4
hid-generic 0003:03F0:094A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-2/input0
fbcon: Taking over console
Console: switching to colour frame buffer device 240x67
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
tsc: Refined TSC clocksource calibration: 4008.000 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39c5e21a6f1, max_idle_ns: 440795312983 ns
clocksource: Switched to clocksource tsc
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
lp: driver loaded but no devices found
EXT4-fs (nvme0n1p1): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
ppdev: user-space parallel port driver
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting Mount unit for core, revision 10577...
systemd[1]: Mounting Mount unit for core, revision 10583...
systemd[1]: Mounting Mount unit for core18, revision 1932...
systemd[1]: Mounting Mount unit for core18, revision 1944...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 60...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 66...
systemd[1]: Mounting Mount unit for gnome-system-monitor, revision 148...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1513...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1514...
systemd[1]: Mounting Mount unit for kde-frameworks-5-qt-5-14-core18, revision 4...
systemd[1]: Mounting Mount unit for kdenlive, revision 24...
systemd[1]: Mounting Mount unit for lxd, revision 9600...
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
systemd-journald[333]: Received client request to flush runtime journal.
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb0: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
cfg80211: Loading compiled-in X.509 certificates for regulatory database
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
scsi 6:0:0:0: Direct-Access WD Elements 107C 1065 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 732558336 4096-byte logical blocks: (3.00 TB/2.73 TiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 53 00 10 08
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI disk
usb 1-3: reset high-speed USB device number 3 using xhci_hcd
mt7601u 1-3:1.0: ASIC revision: 76010001 MAC revision: 76010500
mt7601u 1-3:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
Adding 7845884k swap on /dev/nvme0n1p5. Priority:-2 extents:1 across:7845884k SSFS
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1611163109.625:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=701 comm="apparmor_parser"
audit: type=1400 audit(1611163109.625:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=708 comm="apparmor_parser"
audit: type=1400 audit(1611163109.625:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=708 comm="apparmor_parser"
audit: type=1400 audit(1611163109.625:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=709 comm="apparmor_parser"
audit: type=1400 audit(1611163109.625:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/5548/usr/lib/snapd/snap-confine" pid=704 comm="apparmor_parser"
audit: type=1400 audit(1611163109.625:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/5548/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=704 comm="apparmor_parser"
audit: type=1400 audit(1611163109.627:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=705 comm="apparmor_parser"
audit: type=1400 audit(1611163109.628:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=715 comm="apparmor_parser"
audit: type=1400 audit(1611163109.629:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=713 comm="apparmor_parser"
mt7601u 1-3:1.0: EEPROM ver:0d fae:00
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver mt7601u
mt7601u 1-3:1.0 wlx00e02da5541b: renamed from wlan0
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: authenticated
wlx00e02da5541b: associate with 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: RX AssocResp from 74:9d:79:bd:0b:00 (capab=0x1431 status=0 aid=1)
wlx00e02da5541b: associated
wlx00e02da5541b: Limiting TX power to 20 (20 - 0) dBm as advertised by 74:9d:79:bd:0b:00
IPv6: ADDRCONF(NETDEV_CHANGE): wlx00e02da5541b: link becomes ready
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 4007999024 Hz
vboxdrv: Successfully loaded version 6.1.10_Ubuntu (interface 0x002d0001)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
SUPR0GipMap: fGetGipCpu=0x1b
vboxdrv: 0000000000000000 VMMR0.r0
vboxdrv: 0000000000000000 VBoxDDR0.r0
vboxdrv: 0000000000000000 VBoxEhciR0.r0
VMMR0InitVM: eflags=246 fKernelFeatures=0x0 (SUPKERNELFEATURES_SMAP=0)
usb 2-7: USB disconnect, device number 2
wlx00e02da5541b: deauthenticating from 74:9d:79:bd:0b:00 by local choice (Reason: 3=DEAUTH_LEAVING)
mt7601u 1-3:1.0: Warning: mt7601u_mcu_wait_resp retrying
mt7601u 1-3:1.0: Warning: mt7601u_mcu_wait_resp retrying
mt7601u 1-3:1.0: Warning: mt7601u_mcu_wait_resp retrying
mt7601u 1-3:1.0: Warning: mt7601u_mcu_wait_resp retrying
mt7601u 1-3:1.0: Warning: mt7601u_mcu_wait_resp retrying
mt7601u 1-3:1.0: Warning: mt7601u_mcu_wait_resp retrying
mt7601u 1-3:1.0: Error: mt7601u_mcu_wait_resp timed out
mt7601u 1-3:1.0: Error: send MCU cmd failed:-110
mt7601u 1-3:1.0: mt7601u_rxdc_cal intro failed:-110
mt7601u 1-3:1.0: Error: send MCU cmd failed:-110
mt7601u 1-3:1.0: mt7601u_rxdc_cal outro failed:-110
mt7601u 1-3:1.0: Error: MCU response pre-completed!
mt7601u 1-3:1.0: Error: MCU resp evt:0 seq:3-f!
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: authenticated
wlx00e02da5541b: associate with 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: RX AssocResp from 74:9d:79:bd:0b:00 (capab=0x1431 status=0 aid=1)
wlx00e02da5541b: associated
wlx00e02da5541b: Limiting TX power to 20 (20 - 0) dBm as advertised by 74:9d:79:bd:0b:00
IPv6: ADDRCONF(NETDEV_CHANGE): wlx00e02da5541b: link becomes ready
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
wlx00e02da5541b: disassociated from 74:9d:79:bd:0b:00 (Reason: 4=DISASSOC_DUE_TO_INACTIVITY)
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: authenticated
wlx00e02da5541b: associate with 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: RX AssocResp from 74:9d:79:bd:0b:00 (capab=0x1431 status=0 aid=1)
wlx00e02da5541b: associated
wlx00e02da5541b: Limiting TX power to 20 (20 - 0) dBm as advertised by 74:9d:79:bd:0b:00
wlx00e02da5541b: disassociated from 74:9d:79:bd:0b:00 (Reason: 4=DISASSOC_DUE_TO_INACTIVITY)
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: authenticated
wlx00e02da5541b: associate with 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: RX AssocResp from 74:9d:79:bd:0b:00 (capab=0x1431 status=0 aid=2)
wlx00e02da5541b: associated
wlx00e02da5541b: Limiting TX power to 20 (20 - 0) dBm as advertised by 74:9d:79:bd:0b:00
wlx00e02da5541b: disassociated from 74:9d:79:bd:0b:00 (Reason: 4=DISASSOC_DUE_TO_INACTIVITY)
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 2/3)
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 3/3)
wlx00e02da5541b: authentication with 74:9d:79:bd:0b:00 timed out
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: authenticated
wlx00e02da5541b: associate with 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: RX AssocResp from 74:9d:79:bd:0b:00 (capab=0x1431 status=1 aid=1)
wlx00e02da5541b: 74:9d:79:bd:0b:00 denied association (code=1)
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: authenticated
wlx00e02da5541b: associate with 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: RX AssocResp from 74:9d:79:bd:0b:00 (capab=0x1431 status=1 aid=1)
wlx00e02da5541b: 74:9d:79:bd:0b:00 denied association (code=1)
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: authenticated
wlx00e02da5541b: associate with 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: RX AssocResp from 74:9d:79:bd:0b:00 (capab=0x1431 status=1 aid=1)
wlx00e02da5541b: 74:9d:79:bd:0b:00 denied association (code=1)
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 2/3)
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 3/3)
wlx00e02da5541b: authentication with 74:9d:79:bd:0b:00 timed out
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: authenticated
wlx00e02da5541b: associate with 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: RX AssocResp from 74:9d:79:bd:0b:00 (capab=0x1431 status=0 aid=2)
wlx00e02da5541b: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlx00e02da5541b: link becomes ready
wlx00e02da5541b: Limiting TX power to 20 (20 - 0) dBm as advertised by 74:9d:79:bd:0b:00
e1000e: enp0s31f6 NIC Link is Down
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e: enp0s31f6 NIC Link is Down
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e: enp0s31f6 NIC Link is Down
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: authenticated
wlx00e02da5541b: associate with 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: RX AssocResp from 74:9d:79:bd:0b:00 (capab=0x1431 status=0 aid=3)
wlx00e02da5541b: associated
wlx00e02da5541b: Limiting TX power to 20 (20 - 0) dBm as advertised by 74:9d:79:bd:0b:00
IPv6: ADDRCONF(NETDEV_CHANGE): wlx00e02da5541b: link becomes ready
wlx00e02da5541b: disassociated from 74:9d:79:bd:0b:00 (Reason: 4=DISASSOC_DUE_TO_INACTIVITY)
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 2/3)
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 3/3)
wlx00e02da5541b: authentication with 74:9d:79:bd:0b:00 timed out
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: authenticated
wlx00e02da5541b: associate with 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: RX AssocResp from 74:9d:79:bd:0b:00 (capab=0x1431 status=0 aid=2)
wlx00e02da5541b: associated
wlx00e02da5541b: Limiting TX power to 20 (20 - 0) dBm as advertised by 74:9d:79:bd:0b:00
wlx00e02da5541b: disassociated from 74:9d:79:bd:0b:00 (Reason: 4=DISASSOC_DUE_TO_INACTIVITY)
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 2/3)
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 3/3)
wlx00e02da5541b: authentication with 74:9d:79:bd:0b:00 timed out
wlx00e02da5541b: authenticate with 74:9d:79:bd:0b:00
wlx00e02da5541b: send auth to 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: authenticated
wlx00e02da5541b: associate with 74:9d:79:bd:0b:00 (try 1/3)
wlx00e02da5541b: RX AssocResp from 74:9d:79:bd:0b:00 (capab=0x1431 status=0 aid=2)
wlx00e02da5541b: associated
wlx00e02da5541b: Limiting TX power to 20 (20 - 0) dBm as advertised by 74:9d:79:bd:0b:00
vboxdrv: 0000000000000000 VMMR0.r0
vboxdrv: 0000000000000000 VBoxDDR0.r0
vboxdrv: 0000000000000000 VBoxEhciR0.r0
VMMR0InitVM: eflags=246 fKernelFeatures=0x0 (SUPKERNELFEATURES_SMAP=0)
vboxdrv: 0000000000000000 VMMR0.r0
vboxdrv: 0000000000000000 VBoxDDR0.r0
vboxdrv: 0000000000000000 VBoxEhciR0.r0
VMMR0InitVM: eflags=246 fKernelFeatures=0x0 (SUPKERNELFEATURES_SMAP=0)
perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79000