dmesg - andreaC
Linux version 4.18.0-193.el8.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 8.3.1 20191121 (Red Hat 8.3.1-5) (GCC)) #1 SMP Fri May 8 10:59:10 UTC 2020
Command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-4.18.0-193.el8.x86_64 root=/dev/mapper/cl-root ro crashkernel=auto resume=/dev/mapper/cl-swap rd.lvm.lv=cl/root rd.lvm.lv=cl/swap
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
BIOS-e820: [mem 0x000000003fff0000-0x000000003fffffff] ACPI data
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Hypervisor detected: KVM
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 27e01001, primary cpu clock
kvm-clock: using sched offset of 5534034352 cycles
clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
tsc: Detected 2807.998 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR variable ranges disabled:
Disabled
x86/PAT: MTRRs disabled, skipping PAT initialization too.
CPU MTRRs all blank - virtualized system.
x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
found SMP MP-table at [mem 0x0009fff0-0x0009ffff]
kexec: Reserving the low 1M of memory for crashkernel
BRK [0x28001000, 0x28001fff] PGTABLE
BRK [0x28002000, 0x28002fff] PGTABLE
BRK [0x28003000, 0x28003fff] PGTABLE
BRK [0x28004000, 0x28004fff] PGTABLE
BRK [0x28005000, 0x28005fff] PGTABLE
RAMDISK: [mem 0x3480d000-0x363fefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
ACPI: XSDT 0x000000003FFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 0x000000003FFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 0x000000003FFF0470 002325 (v02 VBOX VBOXBIOS 00000002 INTL 20190509)
ACPI: FACS 0x000000003FFF0200 000040
ACPI: FACS 0x000000003FFF0200 000040
ACPI: APIC 0x000000003FFF0240 000054 (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI: SSDT 0x000000003FFF02A0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20190509)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000003ffeffff]
NODE_DATA(0) allocated [mem 0x3ffc6000-0x3ffeffff]
Using crashkernel=auto, the size chosen is a best effort estimation.
Reserving 160MB of memory at 672MB for crashkernel (System RAM: 1023MB)
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000003ffeffff]
Normal empty
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000003ffeffff]
Zeroed struct page in unavailable ranges: 98 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffeffff]
On node 0 totalpages: 262030
DMA zone: 64 pages used for memmap
DMA zone: 158 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 4032 pages used for memmap
DMA32 zone: 258032 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[mem 0x40000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on KVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
percpu: Embedded 53 pages/cpu s180224 r8192 d28672 u2097152
pcpu-alloc: s180224 r8192 d28672 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists, mobility grouping on. Total pages: 257776
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-4.18.0-193.el8.x86_64 root=/dev/mapper/cl-root ro crashkernel=auto resume=/dev/mapper/cl-swap rd.lvm.lv=cl/root rd.lvm.lv=cl/swap
Specific versions of hardware are certified with Red Hat Enterprise Linux 8. Please see the list of hardware certified with Red Hat Enterprise Linux 8 at .
Memory: 261120K/1048120K available (12292K kernel code, 2151K rwdata, 3848K rodata, 2404K init, 6476K bss, 245028K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 36334 entries in 142 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=1.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS: 524544, nr_irqs: 256, preallocated irqs: 16
random: get_random_bytes called from start_kernel+0x36b/0x55b with crng_init=0
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190703
APIC: Switch to symmetric I/O mode setup
x2apic enabled
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2879c456dd4, max_idle_ns: 440795285767 ns
Calibrating delay loop (skipped) preset value.. 5615.99 BogoMIPS (lpj=2807998)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
FEATURE SPEC_CTRL Not Present
FEATURE IBPB_SUPPORT Not Present
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Vulnerable
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 32K
smpboot: CPU0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: unsupported p6 CPU model 158 no PMU driver, software events only.
rcu: Hierarchical SRCU implementation.
NMI watchdog: Perf NMI watchdog permanently disabled
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 1 CPU
smpboot: Max logical packages: 1
smpboot: Total of 1 processors activated (5615.99 BogoMIPS)
node 0 initialised, 135493 pages in 0ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 256 (order: 2, 16384 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
audit: type=2000 audit(1610094984.154:1): state=initialized audit_enabled=0 res=1
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 07
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xfdffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:02.0: [15ad:0405] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [io 0xd010-0xd01f]
pci 0000:00:02.0: reg 0x14: [mem 0xf0000000-0xf0ffffff pref]
pci 0000:00:02.0: reg 0x18: [mem 0xf1000000-0xf11fffff]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xf1200000-0xf121ffff]
pci 0000:00:03.0: reg 0x18: [io 0xd020-0xd027]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [io 0xd040-0xd05f]
pci 0000:00:04.0: reg 0x14: [mem 0xf1400000-0xf17fffff]
pci 0000:00:04.0: reg 0x18: [mem 0xf1800000-0xf1803fff pref]
pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
pci 0000:00:06.0: reg 0x10: [mem 0xf1804000-0xf1804fff]
pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB
pci 0000:00:08.0: [8086:100e] type 00 class 0x020000
pci 0000:00:08.0: reg 0x10: [mem 0xf1820000-0xf183ffff]
pci 0000:00:08.0: reg 0x18: [io 0xd240-0xd247]
pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
pci 0000:00:0d.0: reg 0x10: [io 0xd248-0xd24f]
pci 0000:00:0d.0: reg 0x14: [io 0xd250-0xd253]
pci 0000:00:0d.0: reg 0x18: [io 0xd258-0xd25f]
pci 0000:00:0d.0: reg 0x1c: [io 0xd260-0xd263]
pci 0000:00:0d.0: reg 0x20: [io 0xd270-0xd27f]
pci 0000:00:0d.0: reg 0x24: [mem 0xf1840000-0xf1841fff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11)
iommu: Default domain type: Passthrough
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource kvm-clock
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp: PnP ACPI: found 2 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x40000000-0xfdffffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 28616K
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c456dd4, max_idle_ns: 440795285767 ns
clocksource: Switched to clocksource tsc
platform rtc_cmos: registered platform RTC device (no PNP device found)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=18 bucket_order=0
zbud: loaded
pstore: using deflate compression
Platform Keyring initialized
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
battery: ACPI: Battery Slot [BAT0] (battery present)
Non-volatile memory driver v1.3
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:06.0: OHCI PCI host controller
ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 1
ohci-pci 0000:00:06.0: irq 22, io mem 0xf1804000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI PCI host controller
usb usb1: Manufacturer: Linux 4.18.0-193.el8.x86_64 ohci_hcd
usb usb1: SerialNumber: 0000:00:06.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos rtc_cmos: registered as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
intel_pstate: CPU model not supported
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
core: Using 0 MCE banks
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (609957682, 0)->(895104804, -285147122)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kernel signing key: 5e845a6615b39bf1de63e0d9551f41c3de386d7f'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 29bd4c0d06d2e9911044b5dc973309139b51d6d5'
Loaded X.509 cert 'CentOS Linux kpatch signing key: b49f086205909dc4da2cfa99376fb191d2f09e78'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
rtc_cmos rtc_cmos: setting system clock to 2021-01-08 08:36:17 UTC (1610094977)
random: fast init done
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
Freeing unused decrypted memory: 2040K
Freeing unused kernel memory: 2404K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2020K
Freeing unused kernel memory: 248K
systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
systemd[1]: Detected virtualization oracle.
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on udev Kernel Socket.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Slices.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000: E1000 MODULE IS NOT SUPPORTED
libata version 3.00 loaded.
ata_piix 0000:00:01.1: version 2.13
ahci 0000:00:0d.0: version 3.0
ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata3: SATA max UDMA/133 abar m8192@0xf1840000 port 0xf1840100 irq 21
ata4: SATA max UDMA/133 abar m8192@0xf1840000 port 0xf1840180 irq 21
ata5: SATA max UDMA/133 abar m8192@0xf1840000 port 0xf1840200 irq 21
ata6: SATA max UDMA/133 abar m8192@0xf1840000 port 0xf1840280 irq 21
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata3.00: 16777216 sectors, multi 128: LBA48 NCQ (depth 32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata4.00: 16777216 sectors, multi 128: LBA48 NCQ (depth 32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:aa:2c:76
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata5.00: 16777216 sectors, multi 128: LBA48 NCQ (depth 32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata6.00: 16777216 sectors, multi 128: LBA48 NCQ (depth 32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: Attached scsi generic sg0 type 5
scsi 2:0:0:0: Attached scsi generic sg1 type 0
scsi 3:0:0:0: Attached scsi generic sg2 type 0
scsi 4:0:0:0: Attached scsi generic sg3 type 0
scsi 5:0:0:0: Attached scsi generic sg4 type 0
sd 2:0:0:0: [sda] 16777216 512-byte logical blocks: (8.59 GB/8.00 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdb] 16777216 512-byte logical blocks: (8.59 GB/8.00 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] 16777216 512-byte logical blocks: (8.59 GB/8.00 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdd] 16777216 512-byte logical blocks: (8.59 GB/8.00 GiB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdd] Attached SCSI disk
sd 4:0:0:0: [sdc] Attached SCSI disk
sd 3:0:0:0: [sdb] Attached SCSI disk
sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
e1000 0000:00:08.0 eth1: (PCI:33MHz:32-bit) 08:00:27:c0:e4:d0
e1000 0000:00:08.0 eth1: Intel(R) PRO/1000 Network Connection
e1000 0000:00:08.0 enp0s8: renamed from eth1
e1000 0000:00:03.0 enp0s3: renamed from eth0
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
PM: Image not found (code -22)
SGI XFS with ACLs, security attributes, no debug enabled
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Starting recovery (logdev: internal)
XFS (dm-0): Ending recovery (logdev: internal)
systemd-journald[259]: Received SIGTERM from PID 1 (systemd).
printk: systemd: 20 output lines suppressed due to ratelimiting
audit: type=1404 audit(1610094983.546:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
audit: type=1403 audit(1610094984.035:3): auid=4294967295 ses=4294967295 lsm=selinux res=1
systemd[1]: Successfully loaded SELinux policy in 495.591ms.
systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 17.430ms.
systemd[1]: systemd 239 (239-41.el8_3) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
systemd[1]: Detected virtualization oracle.
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd-fstab-generator[675]: Failed to create unit file /run/systemd/generator/var.mount, as it already exists. Duplicate entry in /etc/fstab?
systemd-fstab-generator[675]: Failed to create unit file /run/systemd/generator/var.mount, as it already exists. Duplicate entry in /etc/fstab?
systemd[669]: /usr/lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.
systemd[1]: /run/systemd/generator/systemd-cryptsetup@-dev-mapper-raid1\x2dnewvar:.service:12: RequiresMountsFor= path is not absolute, ignoring: TYPE=crypto_LUKS
systemd[1]: systemd-journald.service: Succeeded.
systemd[1]: initrd-switch-root.service: Succeeded.
systemd[1]: Stopped Switch Root.
systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
Adding 839676k swap on /dev/mapper/cl-swap. Priority:-2 extents:1 across:839676k FS
piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
input: PC Speaker as /devices/platform/pcspkr/input/input6
RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 8580497408
[drm] DMA map mode: Caching DMA mappings.
[drm] Capabilities:
[drm] Cursor.
[drm] Cursor bypass 2.
[drm] Alpha cursor.
[drm] 3D.
[drm] Extended Fifo.
[drm] Pitchlock.
[drm] Irq mask.
[drm] GMR.
[drm] Traces.
[drm] GMR2.
[drm] Screen Object 2.
[drm] Max GMR ids is 8192
[drm] Max number of GMR pages is 1048576
[drm] Max dedicated hypervisor surface memory is 507904 kiB
[drm] Maximum display memory size is 16384 kiB
[drm] VRAM at 0xf0000000 size is 16384 kiB
[drm] MMIO at 0xf1000000 size is 2048 kiB
[TTM] Zone kernel: Available graphics memory: 419226 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
[drm] Screen Objects Display Unit initialized
[drm] width 720
[drm] height 400
[drm] bpp 32
[drm] Fifo max 0x00200000 min 0x00001000 cap 0x00000355
[drm] DX: no.
[drm] Atomic: yes.
[drm] SM4_1: no.
[drm:vmw_host_log [vmwgfx]] *ERROR* Failed to send host log message.
[drm:vmw_host_log [vmwgfx]] *ERROR* Failed to send host log message.
intel_pmc_core intel_pmc_core.0: initialized
fbcon: svgadrmfb (fb0) is primary device
Console: switching to colour frame buffer device 100x37
[drm] Initialized vmwgfx 2.15.0 20180704 for 0000:00:02.0 on minor 0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): recovery complete
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[687]: Received request to flush runtime journal from PID 1
snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s8: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s8: link is not ready
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
e1000: enp0s8 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s8: link becomes ready
systemd-fstab-generator[1470]: Failed to create unit file /run/systemd/generator/var.mount, as it already exists. Duplicate entry in /etc/fstab?
systemd-fstab-generator[1470]: Failed to create unit file /run/systemd/generator/var.mount, as it already exists. Duplicate entry in /etc/fstab?
systemd-fstab-generator[1713]: Failed to create unit file /run/systemd/generator/var.mount, as it already exists. Duplicate entry in /etc/fstab?
systemd-fstab-generator[1713]: Failed to create unit file /run/systemd/generator/var.mount, as it already exists. Duplicate entry in /etc/fstab?
systemd-fstab-generator[1778]: Failed to create unit file /run/systemd/generator/var.mount, as it already exists. Duplicate entry in /etc/fstab?
systemd-fstab-generator[1778]: Failed to create unit file /run/systemd/generator/var.mount, as it already exists. Duplicate entry in /etc/fstab?
systemd-fstab-generator[2004]: Failed to create unit file /run/systemd/generator/var.mount, as it already exists. Duplicate entry in /etc/fstab?
systemd-fstab-generator[2004]: Failed to create unit file /run/systemd/generator/var.mount, as it already exists. Duplicate entry in /etc/fstab?
systemd-fstab-generator[2200]: Failed to create unit file /run/systemd/generator/var.mount, as it already exists. Duplicate entry in /etc/fstab?
systemd-fstab-generator[2200]: Failed to create unit file /run/systemd/generator/var.mount, as it already exists. Duplicate entry in /etc/fstab?
audit: type=1400 audit(1610097405.025:4): avc: denied { name_connect } for pid=2296 comm="php-fpm" dest=3386 scontext=system_u:system_r:httpd_t:s0 tcontext=system_u:object_r:unreserved_port_t:s0 tclass=tcp_socket permissive=0
audit: type=1400 audit(1610097499.417:5): avc: denied { name_connect } for pid=2297 comm="php-fpm" dest=3386 scontext=system_u:system_r:httpd_t:s0 tcontext=system_u:object_r:unreserved_port_t:s0 tclass=tcp_socket permissive=0
audit: type=1400 audit(1610097559.685:6): avc: denied { name_connect } for pid=2298 comm="php-fpm" dest=3386 scontext=system_u:system_r:httpd_t:s0 tcontext=system_u:object_r:unreserved_port_t:s0 tclass=tcp_socket permissive=0
audit: type=1405 audit(1610097737.475:7): bool=httpd_can_network_connect_db val=1 old_val=0 auid=1000 ses=1
audit: type=1107 audit(1610097737.475:8): pid=865 uid=81 auid=4294967295 ses=4294967295 subj=system_u:system_r:system_dbusd_t:s0-s0:c0.c1023 msg='avc: received policyload notice (seqno=2)
exe="/usr/bin/dbus-daemon" sauid=81 hostname=? addr=? terminal=?'
SELinux: Converting 411 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
audit: type=1107 audit(1610097738.484:9): pid=865 uid=81 auid=4294967295 ses=4294967295 subj=system_u:system_r:system_dbusd_t:s0-s0:c0.c1023 msg='avc: received policyload notice (seqno=3)
exe="/usr/bin/dbus-daemon" sauid=81 hostname=? addr=? terminal=?'
audit: type=1403 audit(1610097738.484:10): auid=1000 ses=1 lsm=selinux res=1
audit: type=1400 audit(1610097750.336:11): avc: denied { name_connect } for pid=2299 comm="php-fpm" dest=3386 scontext=system_u:system_r:httpd_t:s0 tcontext=system_u:object_r:unreserved_port_t:s0 tclass=tcp_socket permissive=0
audit: type=1400 audit(1610097781.021:12): avc: denied { name_connect } for pid=2300 comm="php-fpm" dest=3386 scontext=system_u:system_r:httpd_t:s0 tcontext=system_u:object_r:unreserved_port_t:s0 tclass=tcp_socket permissive=0