dmesg - asrock_b460m_hdv_jtr_1

Return To asrock_b460m_hdv_jtr_1 System Information

microcode: microcode updated early to revision 0xe0, date = 2020-07-08
Linux version 5.9.12-100.fc32.x86_64 (mockbuild@bkernel01.iad2.fedoraproject.org) (gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6), GNU ld version 2.34-6.fc32) #1 SMP Wed Dec 2 15:58:24 UTC 2020
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
x86/fpu: xstate_offset[9]:  960, xstate_sizes[9]:    8
x86/fpu: Enabled xstate features 0x21f, context size is 968 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved
BIOS-e820: [mem 0x0000000040400000-0x000000008b921fff] usable
BIOS-e820: [mem 0x000000008b922000-0x000000008b922fff] ACPI NVS
BIOS-e820: [mem 0x000000008b923000-0x000000008b948fff] usable
BIOS-e820: [mem 0x000000008b949000-0x000000008b949fff] reserved
BIOS-e820: [mem 0x000000008b94a000-0x000000008bac5fff] usable
BIOS-e820: [mem 0x000000008bac6000-0x000000008d331fff] reserved
BIOS-e820: [mem 0x000000008d332000-0x000000008d3aefff] ACPI data
BIOS-e820: [mem 0x000000008d3af000-0x000000008d887fff] ACPI NVS
BIOS-e820: [mem 0x000000008d888000-0x000000008dffefff] reserved
BIOS-e820: [mem 0x000000008dfff000-0x000000008dffffff] usable
BIOS-e820: [mem 0x000000008e000000-0x000000009f7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000045f7fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x86a5a018-0x86a6a457] usable ==> usable
e820: update [mem 0x86a5a018-0x86a6a457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000003fffffff] usable
reserve setup_data: [mem 0x0000000040000000-0x00000000403fffff] reserved
reserve setup_data: [mem 0x0000000040400000-0x0000000086a5a017] usable
reserve setup_data: [mem 0x0000000086a5a018-0x0000000086a6a457] usable
reserve setup_data: [mem 0x0000000086a6a458-0x000000008b921fff] usable
reserve setup_data: [mem 0x000000008b922000-0x000000008b922fff] ACPI NVS
reserve setup_data: [mem 0x000000008b923000-0x000000008b948fff] usable
reserve setup_data: [mem 0x000000008b949000-0x000000008b949fff] reserved
reserve setup_data: [mem 0x000000008b94a000-0x000000008bac5fff] usable
reserve setup_data: [mem 0x000000008bac6000-0x000000008d331fff] reserved
reserve setup_data: [mem 0x000000008d332000-0x000000008d3aefff] ACPI data
reserve setup_data: [mem 0x000000008d3af000-0x000000008d887fff] ACPI NVS
reserve setup_data: [mem 0x000000008d888000-0x000000008dffefff] reserved
reserve setup_data: [mem 0x000000008dfff000-0x000000008dffffff] usable
reserve setup_data: [mem 0x000000008e000000-0x000000009f7fffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000045f7fffff] usable
efi: EFI v2.70 by American Megatrends
efi: ACPI=0x8d804000 ACPI 2.0=0x8d804014 SMBIOS=0x8dd89000 SMBIOS 3.0=0x8dd88000 MEMATTR=0x86c8f418 ESRT=0x89594798 RNG=0x8ddb1a98 
efi: seeding entropy pool
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./B460M-HDV, BIOS P1.20 04/29/2020
tsc: Detected 2900.000 MHz processor
tsc: Detected 2899.886 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x45f800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 00C0000000 mask 7FC0000000 uncachable
  1 base 00A0000000 mask 7FE0000000 uncachable
  2 base 0090000000 mask 7FF0000000 uncachable
  3 base 008F000000 mask 7FFF000000 uncachable
  4 base 2000000000 mask 6000000000 uncachable
  5 base 1000000000 mask 7000000000 uncachable
  6 base 0800000000 mask 7800000000 uncachable
  7 base 4000000000 mask 4000000000 uncachable
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
last_pfn = 0x8e000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x0000000089594798 to 0x00000000895947f8.
e820: update [mem 0x89594000-0x89594fff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x7e017000-0x7fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008D804014 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008D803728 0000BC (v01 ALASKA A M I    01072009 AMI  01000013)
ACPI: FACP 0x000000008D3A8000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x000000008D372000 035EA7 (v02 ALASKA A M I    01072009 INTL 20160527)
ACPI: FACS 0x000000008D887000 000040
ACPI: MCFG 0x000000008D3AC000 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: SSDT 0x000000008D3A9000 0020AD (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
ACPI: FIDT 0x000000008D371000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: AAFT 0x000000008D3AE000 000383 (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
ACPI: SSDT 0x000000008D36D000 0031DA (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
ACPI: HPET 0x000000008D3AD000 000038 (v01 ALASKA A M I    01072009 AMI  01000013)
ACPI: SSDT 0x000000008D36A000 002E3E (v02 INTEL  xh_cmvd4 00000000 INTL 20160527)
ACPI: NHLT 0x000000008D369000 00002D (v00 ALASKA A M I    01072009 AMI  01000013)
ACPI: LPIT 0x000000008D368000 000094 (v01 ALASKA A M I    01072009 AMI  01000013)
ACPI: SSDT 0x000000008D364000 0025B2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527)
ACPI: DBGP 0x000000008D363000 000034 (v01 ALASKA A M I    01072009 AMI  01000013)
ACPI: DBG2 0x000000008D362000 000054 (v00 ALASKA A M I    01072009 AMI  01000013)
ACPI: SSDT 0x000000008D360000 001B67 (v02 ALASKA UsbCTabl 00001000 INTL 20160527)
ACPI: DMAR 0x000000008D35F000 0000A8 (v01 INTEL  EDK2     00000002      01000013)
ACPI: BGRT 0x000000008D35E000 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: WSMT 0x000000008D367000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: APIC 0x000000008D35D000 00012C (v04 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x000000008D35C000 000044 (v01 ALASKA CML      01072009 AMI  01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000045f7fffff]
NODE_DATA(0) allocated [mem 0x45f7d5000-0x45f7fffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000045f7fffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009dfff]
  node   0: [mem 0x000000000009f000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x000000003fffffff]
  node   0: [mem 0x0000000040400000-0x000000008b921fff]
  node   0: [mem 0x000000008b923000-0x000000008b948fff]
  node   0: [mem 0x000000008b94a000-0x000000008bac5fff]
  node   0: [mem 0x000000008dfff000-0x000000008dffffff]
  node   0: [mem 0x0000000100000000-0x000000045f7fffff]
Zeroed struct page in unavailable ranges: 20893 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000045f7fffff]
On node 0 totalpages: 4107875
  DMA zone: 64 pages used for memmap
  DMA zone: 26 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 8860 pages used for memmap
  DMA32 zone: 566981 pages, LIFO batch:63
  Normal zone: 55264 pages used for memmap
  Normal zone: 3536896 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x8f800000-0x9f7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x87174000-0x871b4fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x40000000-0x403fffff]
PM: hibernation: Registered nosave memory: [mem 0x86a5a000-0x86a5afff]
PM: hibernation: Registered nosave memory: [mem 0x86a6a000-0x86a6afff]
PM: hibernation: Registered nosave memory: [mem 0x87174000-0x871b4fff]
PM: hibernation: Registered nosave memory: [mem 0x89594000-0x89594fff]
PM: hibernation: Registered nosave memory: [mem 0x8b922000-0x8b922fff]
PM: hibernation: Registered nosave memory: [mem 0x8b949000-0x8b949fff]
PM: hibernation: Registered nosave memory: [mem 0x8bac6000-0x8d331fff]
PM: hibernation: Registered nosave memory: [mem 0x8d332000-0x8d3aefff]
PM: hibernation: Registered nosave memory: [mem 0x8d3af000-0x8d887fff]
PM: hibernation: Registered nosave memory: [mem 0x8d888000-0x8dffefff]
PM: hibernation: Registered nosave memory: [mem 0x8e000000-0x9f7fffff]
PM: hibernation: Registered nosave memory: [mem 0x9f800000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x9f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
Built 1 zonelists, mobility grouping on.  Total pages: 4043661
Policy zone: Normal
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 15927716K/16431500K available (14339K kernel code, 2518K rwdata, 8760K rodata, 2516K init, 4580K bss, 503524K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x2e/0x550 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 44235 entries in 173 pages
ftrace: allocated 173 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
	Trampoline variant of Tasks RCU enabled.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 2184, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200717
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000008db1c000 end: 0x0000008dd65fff
DMAR: RMRR base: 0x0000008f000000 end: 0x0000009f7fffff
DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=2899886)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux:  Initializing.
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Enhanced IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz (family: 0x6, model: 0xa5, stepping: 0x5)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version:                4
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (92796.35 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x8b922000-0x8b922fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8d3af000-0x8d887fff] (5083136 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
xor: automatically using best checksumming function   avx       
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 01:59:08, date: 2020-12-28
NET: Registered protocol family 16
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1609120748.034:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
alg: No test for 842 (842-generic)
alg: No test for 842 (842-scomp)
raid6: skip pq benchmark and using algorithm avx2x4
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8F874CFA7800 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8F874C86F800 0005E4 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8F874BE8AF00 0000FC (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8F874C86B000 000778 (v02 PmRef  ApIst    00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8F874BD96000 000D22 (v02 PmRef  ApPsd    00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8F874CFA4C00 0003CA (v02 PmRef  ApCst    00003000 INTL 20160527)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 10 GPEs in block 00 to 7F
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [PIN] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x9f800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:9b43] type 00 class 0x060000
pci 0000:00:02.0: [8086:9bc5] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:14.0: [8086:a3af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb1030000-0xb103ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a3b1] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xb104e000-0xb104efff 64bit]
pci 0000:00:16.0: [8086:a3ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb104d000-0xb104dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a382] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xb1048000-0xb1049fff]
pci 0000:00:17.0: reg 0x14: [mem 0xb104c000-0xb104c0ff]
pci 0000:00:17.0: reg 0x18: [io  0x3090-0x3097]
pci 0000:00:17.0: reg 0x1c: [io  0x3080-0x3083]
pci 0000:00:17.0: reg 0x20: [io  0x3060-0x307f]
pci 0000:00:17.0: reg 0x24: [mem 0xb104b000-0xb104b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1f.0: [8086:a3c8] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a3a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xb1044000-0xb1047fff]
pci 0000:00:1f.3: [8086:a3f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xb1040000-0xb1043fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xb1020000-0xb102ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a3a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xb104a000-0xb104a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
pci 0000:00:1f.6: [8086:0d55] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xb1000000-0xb101ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
iommu: Default domain type: Translated 
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x86a5a018-0x87ffffff]
e820: reserve RAM buffer [mem 0x87174000-0x87ffffff]
e820: reserve RAM buffer [mem 0x89594000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8b922000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8b949000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8bac6000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8e000000-0x8fffffff]
e820: reserve RAM buffer [mem 0x45f800000-0x45fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0x40000000-0x403fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io  0x0280-0x028f] has been reserved
system 00:01: [io  0x0290-0x029f] has been reserved
system 00:01: [io  0x02a0-0x02bf] has been reserved
system 00:01: [io  0x02c0-0x02cf] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 3]
pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [io  0x0680-0x069f] has been reserved
system 00:04: [io  0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io  0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io  0x2000-0x20fe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfe038000-0xfe038fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 11 [mem 0x9f800000-0xdfffffff window]
pci_bus 0000:00: resource 12 [mem 0xfc800000-0xfe7fffff window]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32668K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x82977000-0x86977000] (64MB)
platform rtc_cmos: registered platform RTC device (no PNP device found)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: Ignoring BGRT: unexpected or invalid BMP data
efifb: framebuffer at 0xa0000000, using 1876k, total 1875k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: \_SB_.PR00: Found 2 idle states
intel_idle: v0.5.1 model 0xA5
intel_idle: Local APIC timer is reliable in all C-states
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xb104b000 port 0xb104b100 irq 122
ata2: SATA max UDMA/133 abar m2048@0xb104b000 port 0xb104b180 irq 122
ata3: SATA max UDMA/133 abar m2048@0xb104b000 port 0xb104b200 irq 122
ata4: SATA max UDMA/133 abar m2048@0xb104b000 port 0xb104b280 irq 122
ata5: SATA max UDMA/133 abar m2048@0xb104b000 port 0xb104b300 irq 122
ata6: DUMMY
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.9.12-100.fc32.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.9.12-100.fc32.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.CR01._PLD], AE_NOT_FOUND (20200717/psargs-330)
ACPI Error: Aborting method \_SB.UBTC.RUCC due to previous error (AE_NOT_FOUND) (20200717/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SS04._PLD due to previous error (AE_NOT_FOUND) (20200717/psparse-529)
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: registered as rtc0
rtc_cmos rtc_cmos: setting system clock to 2020-12-28T01:59:09 UTC (1609120749)
rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
intel_pstate: CPU model not supported
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:06 [mem 0xfdb00000-0xfdffffff]
caller pmc_core_probe+0x6d/0x350 mapping multiple BARs
intel_pmc_core INT33A1:00:  initialized
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
RPL Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: sig=0xa0655, pf=0x2, revision=0xe0
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (874088923, 3461694)->(883471190, -5920573)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 54a58332202d4128acc49e99bbe7a0504af78058'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, crc32c=crc32c-generic
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
PM:   Magic number: 0:687:964
memory memory15: hash matches
RAS: Correctable Errors collector initialized.
ata1: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata3.00: ATA-11: SanDisk SSD G5 BICS4, 415000WD, max UDMA/133
ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      SanDisk SSD G5 B 00WD PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 sda5
sd 2:0:0:0: [sda] Attached SCSI disk
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2516K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 1480K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
usb 1-3: new low-speed USB device number 2 using xhci_hcd
Run /init as init process
  with arguments:
    /init
    rhgb
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=(hd0,gpt4)/vmlinuz-5.9.12-100.fc32.x86_64
systemd[1]: systemd v245.8-2.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Local File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
audit: type=1130 audit(1609120749.941:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
fuse: init (API version 7.31)
audit: type=1130 audit(1609120749.945:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1609120749.948:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1609120749.950:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 1-3: New USB device found, idVendor=1c4f, idProduct=0026, bcdDevice= 1.10
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: USB Keyboard
usb 1-3: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:1C4F:0026.0001/input/input3
audit: type=1130 audit(1609120749.975:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1609120750.006:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
hid-generic 0003:1C4F:0026.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-3/input0
input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:1C4F:0026.0002/input/input4
audit: type=1130 audit(1609120750.022:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1334 audit(1609120750.022:9): prog-id=6 op=LOAD
audit: type=1334 audit(1609120750.022:10): prog-id=7 op=LOAD
input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:1C4F:0026.0002/input/input5
hid-generic 0003:1C4F:0026.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-3/input1
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 1-4: new low-speed USB device number 3 using xhci_hcd
usb 1-4: New USB device found, idVendor=047d, idProduct=1022, bcdDevice= 1.05
usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-4: Product: Kensington USB Orbit
input: Kensington USB Orbit as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:047D:1022.0003/input/input6
hid-generic 0003:047D:1022.0003: input,hidraw2: USB HID v1.11 Mouse [Kensington USB Orbit] on usb-0000:00:14.0-4/input0
checking generic (a0000000 1d5000) vs hw (b0000000 1000000)
checking generic (a0000000 1d5000) vs hw (a0000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
i915 0000:00:02.0: vgaarb: deactivate vga console
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[drm] Initialized i915 1.6.0 20200715 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
fbcon: i915drmfb (fb0) is primary device
fbcon: Deferring console take-over
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
usb 1-7: new high-speed USB device number 4 using xhci_hcd
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) a8:a1:59:2f:cd:d1
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 eno1: renamed from eth0
tsc: Refined TSC clocksource calibration: 2903.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc050a48e, max_idle_ns: 440795325698 ns
clocksource: Switched to clocksource tsc
usb 1-7: device descriptor read/64, error -110
usb 1-7: device descriptor read/64, error -110
usb 1-7: new high-speed USB device number 5 using xhci_hcd
usb 1-7: device descriptor read/64, error -110
usb 1-7: device descriptor read/64, error -110
usb usb1-port7: attempt power cycle
usb 1-7: new high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 1-7: device not accepting address 6, error -62
usb 1-7: new high-speed USB device number 7 using xhci_hcd
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 1-7: device not accepting address 7, error -62
usb usb1-port7: unable to enumerate USB device
usb 1-10: new high-speed USB device number 8 using xhci_hcd
usb 1-10: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-10: Product: USB2.0 Hub
hub 1-10:1.0: USB hub found
hub 1-10:1.0: 4 ports detected
kauditd_printk_skb: 3 callbacks suppressed
audit: type=1130 audit(1609120816.760:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1609120816.897:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1334 audit(1609120816.913:16): prog-id=7 op=UNLOAD
audit: type=1334 audit(1609120816.913:17): prog-id=6 op=UNLOAD
audit: type=1334 audit(1609120816.913:18): prog-id=5 op=UNLOAD
audit: type=1334 audit(1609120816.913:19): prog-id=4 op=UNLOAD
audit: type=1334 audit(1609120816.913:20): prog-id=3 op=UNLOAD
audit: type=1334 audit(1609120816.986:21): prog-id=8 op=LOAD
audit: type=1334 audit(1609120816.986:22): prog-id=9 op=LOAD
audit: type=1334 audit(1609120816.986:23): prog-id=10 op=LOAD
systemd-journald[292]: Received SIGTERM from PID 1 (systemd).
SELinux:  Permission watch in class filesystem not defined in policy.
SELinux:  Permission watch in class file not defined in policy.
SELinux:  Permission watch_mount in class file not defined in policy.
SELinux:  Permission watch_sb in class file not defined in policy.
SELinux:  Permission watch_with_perm in class file not defined in policy.
SELinux:  Permission watch_reads in class file not defined in policy.
SELinux:  Permission watch in class dir not defined in policy.
SELinux:  Permission watch_mount in class dir not defined in policy.
SELinux:  Permission watch_sb in class dir not defined in policy.
SELinux:  Permission watch_with_perm in class dir not defined in policy.
SELinux:  Permission watch_reads in class dir not defined in policy.
SELinux:  Permission watch in class lnk_file not defined in policy.
SELinux:  Permission watch_mount in class lnk_file not defined in policy.
SELinux:  Permission watch_sb in class lnk_file not defined in policy.
SELinux:  Permission watch_with_perm in class lnk_file not defined in policy.
SELinux:  Permission watch_reads in class lnk_file not defined in policy.
SELinux:  Permission watch in class chr_file not defined in policy.
SELinux:  Permission watch_mount in class chr_file not defined in policy.
SELinux:  Permission watch_sb in class chr_file not defined in policy.
SELinux:  Permission watch_with_perm in class chr_file not defined in policy.
SELinux:  Permission watch_reads in class chr_file not defined in policy.
SELinux:  Permission watch in class blk_file not defined in policy.
SELinux:  Permission watch_mount in class blk_file not defined in policy.
SELinux:  Permission watch_sb in class blk_file not defined in policy.
SELinux:  Permission watch_with_perm in class blk_file not defined in policy.
SELinux:  Permission watch_reads in class blk_file not defined in policy.
SELinux:  Permission watch in class sock_file not defined in policy.
SELinux:  Permission watch_mount in class sock_file not defined in policy.
SELinux:  Permission watch_sb in class sock_file not defined in policy.
SELinux:  Permission watch_with_perm in class sock_file not defined in policy.
SELinux:  Permission watch_reads in class sock_file not defined in policy.
SELinux:  Permission watch in class fifo_file not defined in policy.
SELinux:  Permission watch_mount in class fifo_file not defined in policy.
SELinux:  Permission watch_sb in class fifo_file not defined in policy.
SELinux:  Permission watch_with_perm in class fifo_file not defined in policy.
SELinux:  Permission watch_reads in class fifo_file not defined in policy.
SELinux:  Permission perfmon in class capability2 not defined in policy.
SELinux:  Permission bpf in class capability2 not defined in policy.
SELinux:  Permission checkpoint_restore in class capability2 not defined in policy.
SELinux:  Permission perfmon in class cap2_userns not defined in policy.
SELinux:  Permission bpf in class cap2_userns not defined in policy.
SELinux:  Permission checkpoint_restore in class cap2_userns not defined in policy.
SELinux:  Class perf_event not defined in policy.
SELinux:  Class lockdown not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux:  policy capability network_peer_controls=1
SELinux:  policy capability open_perms=1
SELinux:  policy capability extended_socket_class=1
SELinux:  policy capability always_check_network=0
SELinux:  policy capability cgroup_seclabel=1
SELinux:  policy capability nnp_nosuid_transition=1
SELinux:  policy capability genfs_seclabel_symlinks=0
systemd[1]: Successfully loaded SELinux policy in 122.875ms.
systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 26.871ms.
systemd[1]: systemd v245.8-2.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
systemd[1]: initrd-switch-root.service: Succeeded.
systemd[1]: Stopped Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Login Prompts.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on multipathd control socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on User Database Manager Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Starting Preprocess NFS configuration convertion...
systemd[1]: plymouth-switch-root.service: Succeeded.
systemd[1]: Stopped Plymouth switch root service.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Stopped Journal Service.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Repartition Root Disk...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: sysroot.mount: Succeeded.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: nfs-convert.service: Succeeded.
systemd[1]: Finished Preprocess NFS configuration convertion.
EXT4-fs (sda1): re-mounted. Opts: (null)
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped.
systemd[1]: Condition check resulted in First Boot Wizard being skipped.
Adding 25165820k swap on /dev/sda2.  Priority:-2 extents:1 across:25165820k SSFS
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Condition check resulted in Create System Users being skipped.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Finished Repartition Root Disk.
systemd[1]: Reached target Swap.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Mounting Temporary Directory (/tmp)...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Temporary Directory (/tmp).
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Started Journal Service.
systemd-journald[568]: Received client request to flush runtime journal.
systemd-journald[568]: File /var/log/journal/b7c091e477014fe586457833981edfd1/system.journal corrupted or uncleanly shut down, renaming and replacing.
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
i2c i2c-4: 2/2 memory slots populated (from DMI)
i2c i2c-4: Successfully instantiated SPD at 0x50
input: PC Speaker as /devices/platform/pcspkr/input/input8
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
ppdev: user-space parallel port driver
ee1004 4-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
iTCO_vendor_support: vendor-support=0
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
intel_rapl_common: RAPL package-0 domain package locked by BIOS
intel_rapl_common: RAPL package-0 domain dram locked by BIOS
snd_hda_intel 0000:00:1f.3: enabling device (0400 -> 0402)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
systemd-journald[568]: File /var/log/journal/b7c091e477014fe586457833981edfd1/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.

Return To asrock_b460m_hdv_jtr_1 System Information