dmesg - unoptimized
Linux version 5.4.72 (root@2cee951a4de2) (gcc version 9.3.0 (Gentoo 9.3.0-r1 p3)) #1 SMP Sat Oct 17 14:25:06 -00 2020
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009dfffff] usable
BIOS-e820: [mem 0x0000000009e00000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000d9b34fff] usable
BIOS-e820: [mem 0x00000000d9b35000-0x00000000db033fff] reserved
BIOS-e820: [mem 0x00000000db034000-0x00000000db05cfff] ACPI data
BIOS-e820: [mem 0x00000000db05d000-0x00000000db512fff] ACPI NVS
BIOS-e820: [mem 0x00000000db513000-0x00000000dc25ffff] reserved
BIOS-e820: [mem 0x00000000dc260000-0x00000000dc4befff] type 20
BIOS-e820: [mem 0x00000000dc4bf000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000081f37ffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0xdb03c000 ACPI=0xdb03c000 SMBIOS=0xdc1cc000 SMBIOS 3.0=0xdc1cb000 ESRT=0xd75b0818
SMBIOS 3.2.0 present.
DMI: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 7601 10/16/2019
tsc: Fast TSC calibration failed
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x81f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000820000000 aka 33280M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000d75b0818 to 0x00000000d75b0878.
e820: update [mem 0xd75b0000-0xd75b0fff] usable ==> reserved
Using GB pages for direct mapping
Secure boot could not be determined
RAMDISK: [mem 0x3536d000-0x369adfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DB03C000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DB03C098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DB04B098 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DB03C1E0 00EEB6 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DB4FAD80 000040
ACPI: APIC 0x00000000DB04B1B0 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DB04B310 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DB04B358 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DB04B3F8 0000FC (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: SSDT 0x00000000DB04B4F8 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DB054190 003301 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DB057498 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: SSDT 0x00000000DB05BF70 0000BF (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: HPET 0x00000000DB057530 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DB057568 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DB057590 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: IVRS 0x00000000DB0575D8 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DB0576A8 001BF4 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DB0592A0 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DB05A1F0 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DB05A220 001D4A (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
Setting APIC routing to physical flat.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000081f37ffff]
NODE_DATA(0) allocated [mem 0x81f355000-0x81f37ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000081f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009dfffff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a20b000-0x000000000affffff]
node 0: [mem 0x000000000b020000-0x00000000d9b34fff]
node 0: [mem 0x00000000dc4bf000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000081f37ffff]
Zeroed struct page in unavailable ranges: 18582 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000081f37ffff]
On node 0 totalpages: 8370026
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 14034 pages used for memmap
DMA32 zone: 898123 pages, LIFO batch:63
Normal zone: 116686 pages used for memmap
Normal zone: 7467904 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 32 CPUs, 16 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09e00000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: Registered nosave memory: [mem 0xd75b0000-0xd75b0fff]
PM: Registered nosave memory: [mem 0xd9b35000-0xdb033fff]
PM: Registered nosave memory: [mem 0xdb034000-0xdb05cfff]
PM: Registered nosave memory: [mem 0xdb05d000-0xdb512fff]
PM: Registered nosave memory: [mem 0xdb513000-0xdc25ffff]
PM: Registered nosave memory: [mem 0xdc260000-0xdc4befff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfd0fffff]
PM: Registered nosave memory: [mem 0xfd100000-0xfd1fffff]
PM: Registered nosave memory: [mem 0xfd200000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 52 pages/cpu s176128 r8192 d28672 u262144
pcpu-alloc: s176128 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists, mobility grouping on. Total pages: 8239217
Policy zone: Normal
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 32588492K/33480104K available (12291K kernel code, 2271K rwdata, 4292K rodata, 2540K init, 5516K bss, 891612K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x3e/0x520 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 41038 entries in 161 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3792.416 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d54b8bd521, max_idle_ns: 881590993276 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7587.86 BogoMIPS (lpj=12641386)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Vulnerable
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD Ryzen 7 1700 Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 16 processors activated (121405.86 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
PM: Registering ACPI NVS region [mem 0xdb05d000-0xdb512fff] (4939776 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 16:34:24, date: 2020-12-14
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1607963664.173:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
fbcon: Taking over console
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xefff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.1: [1022:1453] type 01 class 0x060400
pci 0000:00:01.1: enabling Extended Tags
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: enabling Extended Tags
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [1022:1453] type 01 class 0x060400
pci 0000:00:03.2: enabling Extended Tags
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:01:00.0: [144d:a804] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:02:00.0: [1022:43b9] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfcca0000-0xfcca7fff 64bit]
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.1: [1022:43b5] type 00 class 0x010601
pci 0000:02:00.1: reg 0x24: [mem 0xfcc80000-0xfcc9ffff]
pci 0000:02:00.1: reg 0x30: [mem 0xfcc00000-0xfcc7ffff pref]
pci 0000:02:00.1: enabling Extended Tags
pci 0000:02:00.1: PME# supported from D3hot D3cold
pci 0000:02:00.2: [1022:43b0] type 01 class 0x060400
pci 0000:02:00.2: enabling Extended Tags
pci 0000:02:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 02-0a]
pci 0000:00:01.3: bridge window [io 0xe000-0xefff]
pci 0000:00:01.3: bridge window [mem 0xfca00000-0xfccfffff]
pci 0000:03:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:02.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:02.0: enabling Extended Tags
pci 0000:03:02.0: PME# supported from D3hot D3cold
pci 0000:03:03.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:03.0: enabling Extended Tags
pci 0000:03:03.0: PME# supported from D3hot D3cold
pci 0000:03:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:04.0: enabling Extended Tags
pci 0000:03:04.0: PME# supported from D3hot D3cold
pci 0000:03:05.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:05.0: enabling Extended Tags
pci 0000:03:05.0: PME# supported from D3hot D3cold
pci 0000:03:06.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:06.0: enabling Extended Tags
pci 0000:03:06.0: PME# supported from D3hot D3cold
pci 0000:03:07.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:07.0: enabling Extended Tags
pci 0000:03:07.0: PME# supported from D3hot D3cold
pci 0000:02:00.2: PCI bridge to [bus 03-0a]
pci 0000:02:00.2: bridge window [io 0xe000-0xefff]
pci 0000:02:00.2: bridge window [mem 0xfca00000-0xfcbfffff]
pci 0000:04:00.0: [1b21:1343] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfcb00000-0xfcb07fff 64bit]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [mem 0xfcb00000-0xfcbfffff]
pci 0000:05:00.0: [8086:1539] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfca00000-0xfca1ffff]
pci 0000:05:00.0: reg 0x18: [io 0xe000-0xe01f]
pci 0000:05:00.0: reg 0x1c: [mem 0xfca20000-0xfca23fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:02.0: PCI bridge to [bus 05]
pci 0000:03:02.0: bridge window [io 0xe000-0xefff]
pci 0000:03:02.0: bridge window [mem 0xfca00000-0xfcafffff]
pci 0000:03:03.0: PCI bridge to [bus 06]
pci 0000:03:04.0: PCI bridge to [bus 07]
pci 0000:03:05.0: PCI bridge to [bus 08]
pci 0000:03:06.0: PCI bridge to [bus 09]
pci 0000:03:07.0: PCI bridge to [bus 0a]
pci 0000:0b:00.0: [1002:67df] type 00 class 0x030000
pci 0000:0b:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:0b:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:0b:00.0: reg 0x20: [io 0xd000-0xd0ff]
pci 0000:0b:00.0: reg 0x24: [mem 0xfce00000-0xfce3ffff]
pci 0000:0b:00.0: reg 0x30: [mem 0xfce40000-0xfce5ffff pref]
pci 0000:0b:00.0: BAR 0: assigned to efifb
pci 0000:0b:00.0: supports D1 D2
pci 0000:0b:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:0b:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:0b:00.1: [1002:aaf0] type 00 class 0x040300
pci 0000:0b:00.1: reg 0x10: [mem 0xfce60000-0xfce63fff 64bit]
pci 0000:0b:00.1: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 0b]
pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.1: bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:0c:00.0: [19a2:0700] type 00 class 0x020000
pci 0000:0c:00.0: reg 0x14: [mem 0xfc61c000-0xfc61ffff]
pci 0000:0c:00.0: reg 0x18: [mem 0xfc5e0000-0xfc5fffff 64bit]
pci 0000:0c:00.0: reg 0x20: [mem 0xfc5c0000-0xfc5dffff 64bit]
pci 0000:0c:00.0: reg 0x30: [mem 0xfc380000-0xfc3fffff pref]
pci 0000:0c:00.0: PME# supported from D3hot D3cold
pci 0000:0c:00.1: [19a2:0700] type 00 class 0x020000
pci 0000:0c:00.1: reg 0x14: [mem 0xfc618000-0xfc61bfff]
pci 0000:0c:00.1: reg 0x18: [mem 0xfc5a0000-0xfc5bffff 64bit]
pci 0000:0c:00.1: reg 0x20: [mem 0xfc580000-0xfc59ffff 64bit]
pci 0000:0c:00.1: reg 0x30: [mem 0xfc300000-0xfc37ffff pref]
pci 0000:0c:00.1: PME# supported from D3hot D3cold
pci 0000:00:03.2: PCI bridge to [bus 0c]
pci 0000:00:03.2: bridge window [mem 0xfc000000-0xfc6fffff]
pci 0000:0d:00.0: [1022:145a] type 00 class 0x130000
pci 0000:0d:00.0: enabling Extended Tags
pci 0000:0d:00.2: [1022:1456] type 00 class 0x108000
pci 0000:0d:00.2: reg 0x18: [mem 0xfc800000-0xfc8fffff]
pci 0000:0d:00.2: reg 0x24: [mem 0xfc900000-0xfc901fff]
pci 0000:0d:00.2: enabling Extended Tags
pci 0000:0d:00.3: [1022:145c] type 00 class 0x0c0330
pci 0000:0d:00.3: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit]
pci 0000:0d:00.3: enabling Extended Tags
pci 0000:0d:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 0d]
pci 0000:00:07.1: bridge window [mem 0xfc700000-0xfc9fffff]
pci 0000:0e:00.0: [1022:1455] type 00 class 0x130000
pci 0000:0e:00.0: enabling Extended Tags
pci 0000:0e:00.2: [1022:7901] type 00 class 0x010601
pci 0000:0e:00.2: reg 0x24: [mem 0xfcd08000-0xfcd08fff]
pci 0000:0e:00.2: enabling Extended Tags
pci 0000:0e:00.2: PME# supported from D3hot D3cold
pci 0000:0e:00.3: [1022:1457] type 00 class 0x040300
pci 0000:0e:00.3: reg 0x10: [mem 0xfcd00000-0xfcd07fff]
pci 0000:0e:00.3: enabling Extended Tags
pci 0000:0e:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0e]
pci 0000:00:08.1: bridge window [mem 0xfcd00000-0xfcdfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events
iommu: Default domain type: Translated
pci 0000:0b:00.0: vgaarb: setting as boot VGA device
pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:0b:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09e00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0xd75b0000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd9b35000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x81f380000-0x81fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x02a0-0x02af] has been reserved
system 00:02: [io 0x0230-0x023f] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x040b] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c51] has been reserved
system 00:03: [io 0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cd1] has been reserved
system 00:03: [io 0x0cd2-0x0cd3] has been reserved
system 00:03: [io 0x0cd4-0x0cd5] has been reserved
system 00:03: [io 0x0cd6-0x0cd7] has been reserved
system 00:03: [io 0x0cd8-0x0cdf] has been reserved
system 00:03: [io 0x0800-0x089f] has been reserved
system 00:03: [io 0x0b00-0x0b0f] has been reserved
system 00:03: [io 0x0b20-0x0b3f] has been reserved
system 00:03: [io 0x0900-0x090f] has been reserved
system 00:03: [io 0x0910-0x091f] has been reserved
system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:03: [mem 0xff000000-0xffffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 4 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [mem 0xfcb00000-0xfcbfffff]
pci 0000:03:02.0: PCI bridge to [bus 05]
pci 0000:03:02.0: bridge window [io 0xe000-0xefff]
pci 0000:03:02.0: bridge window [mem 0xfca00000-0xfcafffff]
pci 0000:03:03.0: PCI bridge to [bus 06]
pci 0000:03:04.0: PCI bridge to [bus 07]
pci 0000:03:05.0: PCI bridge to [bus 08]
pci 0000:03:06.0: PCI bridge to [bus 09]
pci 0000:03:07.0: PCI bridge to [bus 0a]
pci 0000:02:00.2: PCI bridge to [bus 03-0a]
pci 0000:02:00.2: bridge window [io 0xe000-0xefff]
pci 0000:02:00.2: bridge window [mem 0xfca00000-0xfcbfffff]
pci 0000:00:01.3: PCI bridge to [bus 02-0a]
pci 0000:00:01.3: bridge window [io 0xe000-0xefff]
pci 0000:00:01.3: bridge window [mem 0xfca00000-0xfccfffff]
pci 0000:00:03.1: PCI bridge to [bus 0b]
pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.1: bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:03.2: PCI bridge to [bus 0c]
pci 0000:00:03.2: bridge window [mem 0xfc000000-0xfc6fffff]
pci 0000:00:07.1: PCI bridge to [bus 0d]
pci 0000:00:07.1: bridge window [mem 0xfc700000-0xfc9fffff]
pci 0000:00:08.1: PCI bridge to [bus 0e]
pci 0000:00:08.1: bridge window [mem 0xfcd00000-0xfcdfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xefff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfca00000-0xfccfffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfca00000-0xfcbfffff]
pci_bus 0000:04: resource 1 [mem 0xfcb00000-0xfcbfffff]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfca00000-0xfcafffff]
pci_bus 0000:0b: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0b: resource 1 [mem 0xfce00000-0xfcefffff]
pci_bus 0000:0b: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0xfc000000-0xfc6fffff]
pci_bus 0000:0d: resource 1 [mem 0xfc700000-0xfc9fffff]
pci_bus 0000:0e: resource 1 [mem 0xfcd00000-0xfcdfffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:0b:00.1: D0 power state depends on 0000:0b:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 22788K
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.1: Adding to iommu group 1
pci 0000:00:01.3: Adding to iommu group 2
pci 0000:00:02.0: Adding to iommu group 3
pci 0000:00:03.0: Adding to iommu group 4
pci 0000:00:03.1: Adding to iommu group 5
pci 0000:00:03.2: Adding to iommu group 6
pci 0000:00:04.0: Adding to iommu group 7
pci 0000:00:07.0: Adding to iommu group 8
pci 0000:00:07.1: Adding to iommu group 9
pci 0000:00:08.0: Adding to iommu group 10
pci 0000:00:08.1: Adding to iommu group 11
pci 0000:00:14.0: Adding to iommu group 12
pci 0000:00:14.3: Adding to iommu group 12
pci 0000:00:18.0: Adding to iommu group 13
pci 0000:00:18.1: Adding to iommu group 13
pci 0000:00:18.2: Adding to iommu group 13
pci 0000:00:18.3: Adding to iommu group 13
pci 0000:00:18.4: Adding to iommu group 13
pci 0000:00:18.5: Adding to iommu group 13
pci 0000:00:18.6: Adding to iommu group 13
pci 0000:00:18.7: Adding to iommu group 13
pci 0000:01:00.0: Adding to iommu group 14
pci 0000:02:00.0: Adding to iommu group 15
pci 0000:02:00.1: Adding to iommu group 15
pci 0000:02:00.2: Adding to iommu group 15
pci 0000:03:00.0: Adding to iommu group 15
pci 0000:03:02.0: Adding to iommu group 15
pci 0000:03:03.0: Adding to iommu group 15
pci 0000:03:04.0: Adding to iommu group 15
pci 0000:03:05.0: Adding to iommu group 15
pci 0000:03:06.0: Adding to iommu group 15
pci 0000:03:07.0: Adding to iommu group 15
pci 0000:04:00.0: Adding to iommu group 15
pci 0000:05:00.0: Adding to iommu group 15
pci 0000:0b:00.0: Adding to iommu group 16
pci 0000:0b:00.0: Using iommu direct mapping
pci 0000:0b:00.1: Adding to iommu group 16
pci 0000:0c:00.0: Adding to iommu group 17
pci 0000:0c:00.1: Adding to iommu group 17
pci 0000:0d:00.0: Adding to iommu group 18
pci 0000:0d:00.2: Adding to iommu group 19
pci 0000:0d:00.3: Adding to iommu group 20
pci 0000:0e:00.0: Adding to iommu group 21
pci 0000:0e:00.2: Adding to iommu group 22
pci 0000:0e:00.3: Adding to iommu group 23
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0xf77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
Platform Keyring initialized
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:01.1: AER: enabled with IRQ 28
pcieport 0000:00:01.3: AER: enabled with IRQ 29
pcieport 0000:00:03.1: AER: enabled with IRQ 30
pcieport 0000:00:03.2: AER: enabled with IRQ 31
pcieport 0000:00:07.1: AER: enabled with IRQ 32
pcieport 0000:00:08.1: AER: enabled with IRQ 33
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:02:00.1: version 3.0
ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80100 irq 44
ata2: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80180 irq 44
ata3: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80200 irq 44
ata4: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80280 irq 44
ata5: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80300 irq 44
ata6: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80380 irq 44
ata7: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80400 irq 44
ata8: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80480 irq 44
ahci 0000:0e:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0e:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host8: ahci
ata9: SATA max UDMA/133 abar m4096@0xfcd08000 port 0xfcd08100 irq 46
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000008000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.72 xhci-hcd
usb usb1: SerialNumber: 0000:02:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.72 xhci-hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.72 xhci-hcd
usb usb3: SerialNumber: 0000:04:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:04:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.72 xhci-hcd
usb usb4: SerialNumber: 0000:04:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:0d:00.3: xHCI Host Controller
xhci_hcd 0000:0d:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0d:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000040000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.4.72 xhci-hcd
usb usb5: SerialNumber: 0000:0d:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:0d:00.3: xHCI Host Controller
xhci_hcd 0000:0d:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:0d:00.3: Host supports USB 3.0 SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.4.72 xhci-hcd
usb usb6: SerialNumber: 0000:0d:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08001138
microcode: CPU1: patch_level=0x08001138
microcode: CPU2: patch_level=0x08001138
microcode: CPU3: patch_level=0x08001138
microcode: CPU4: patch_level=0x08001138
microcode: CPU5: patch_level=0x08001138
microcode: CPU6: patch_level=0x08001138
microcode: CPU7: patch_level=0x08001138
microcode: CPU8: patch_level=0x08001138
microcode: CPU9: patch_level=0x08001138
microcode: CPU10: patch_level=0x08001138
microcode: CPU11: patch_level=0x08001138
microcode: CPU12: patch_level=0x08001138
microcode: CPU13: patch_level=0x08001138
microcode: CPU14: patch_level=0x08001138
microcode: CPU15: patch_level=0x08001138
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (718874698, -23327762)->(721184292, -25637356)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
PM: Magic number: 0:815:590
rtc_cmos 00:01: setting system clock to 2020-12-14T16:34:25 UTC (1607963665)
ata1: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
usb 1-5: new full-speed USB device number 2 using xhci_hcd
usb 5-2: new full-speed USB device number 2 using xhci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0001/input/input2
usb 1-5: New USB device found, idVendor=b58e, idProduct=9e84, bcdDevice= 1.00
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Yeti Stereo Microphone
usb 1-5: Manufacturer: Blue Microphones
usb 1-5: SerialNumber: 797_2018/04/26_14309
hid-generic 0003:FEED:3060.0001: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
input: Blue Microphones Yeti Stereo Microphone Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-5/1-5:1.3/0003:B58E:9E84.0002/input/input3
hid-generic 0003:B58E:9E84.0002: input,hiddev96,hidraw1: USB HID v1.00 Device [Blue Microphones Yeti Stereo Microphone] on usb-0000:02:00.0-5/input3
usb 5-4: new full-speed USB device number 3 using xhci_hcd
usb 1-6: new full-speed USB device number 3 using xhci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 3792.875 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d581b92771, max_idle_ns: 881590605997 ns
clocksource: Switched to clocksource tsc
usb 5-4: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
usb 5-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-4: Product: CSR8510 A10
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-6: New USB device found, idVendor=046d, idProduct=c332, bcdDevice= 3.02
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Gaming Mouse G502
usb 1-6: Manufacturer: Logitech
usb 1-6: SerialNumber: 076B38613437
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-6/1-6:1.0/0003:046D:C332.0003/input/input5
hid-generic 0003:046D:C332.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:02:00.0-6/input0
input: Logitech Gaming Mouse G502 Keyboard as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-6/1-6:1.1/0003:046D:C332.0004/input/input6
input: Logitech Gaming Mouse G502 Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-6/1-6:1.1/0003:046D:C332.0004/input/input7
input: Logitech Gaming Mouse G502 System Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-6/1-6:1.1/0003:046D:C332.0004/input/input8
hid-generic 0003:046D:C332.0004: input,hiddev97,hidraw3: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:02:00.0-6/input1
usb 1-8: new high-speed USB device number 4 using xhci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-8: New USB device found, idVendor=0d8c, idProduct=0319, bcdDevice= 1.07
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: Schiit Modi Uber
usb 1-8: Manufacturer: Schiit Audio
hid-generic 0003:0D8C:0319.0005: No inputs registered, leaving
hid-generic 0003:0D8C:0319.0005: hidraw4: USB HID v1.00 Device [Schiit Audio Schiit Modi Uber] on usb-0000:02:00.0-8/input2
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2540K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel image memory: 2016K
Freeing unused kernel image memory: 1852K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
systemd-udevd[380]: starting version 3.2.9
udevd[381]: starting eudev-3.2.9
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
nvme nvme0: pci function 0000:01:00.0
nvme nvme0: 8/0/0 default/read/poll queues
nvme0n1: p1 p2
F2FS-fs (nvme0n1p2): recover fsync data on readonly fs
F2FS-fs (nvme0n1p2): Mounted with checkpoint version = 36067d18
dracut: Mounted root filesystem /dev/nvme0n1p2
dracut: Switching root
udevd[939]: starting version 3.2.9
udevd[939]: starting eudev-3.2.9
acpi_cpufreq: overriding BIOS provided _PSD data
dca service started, version 1.12.1
be2net 0000:0c:00.0: be2net version is 12.0.0.0
be2net 0000:0c:00.0: PCIe error reporting enabled
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
mc: Linux media interface: v0.10
ccp 0000:0d:00.2: enabling device (0000 -> 0002)
ccp 0000:0d:00.2: ccp enabled
pps pps0: new PPS source ptp0
igb 0000:05:00.0: added PHC on eth0
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 4c:ed:fb:76:56:7a
igb 0000:05:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:05:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
input: PC Speaker as /devices/platform/pcspkr/input/input12
snd_hda_intel 0000:0b:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:0b:00.1: Force to non-snoop mode
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
sp5100-tco sp5100-tco: Watchdog hardware is disabled
snd_hda_intel 0000:0e:00.3: enabling device (0000 -> 0002)
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
asus_wmi: ASUS WMI generic driver loaded
Error: Driver 'pcspkr' is already registered, aborting...
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13
usbcore: registered new interface driver btusb
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card1/input15
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card1/input16
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card1/input17
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card1/input18
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card1/input19
[drm] amdgpu kernel modesetting enabled.
Parsing CRAT table with 1 nodes
Ignoring ACPI CRAT on non-APU system
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfce00000 -> 0xfce3ffff
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb0: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
amdgpu 0000:0b:00.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1DA2:0xE366 0xE1).
[drm] register mmio base: 0xFCE00000
[drm] register mmio size: 262144
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
amdgpu 0000:0b:00.0: No more image in the PCI ROM
ATOM BIOS: 113-4E3661U-X6M
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
amdgpu 0000:0b:00.0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used)
amdgpu 0000:0b:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[drm] Detected VRAM RAM=8192M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 16436634 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 8192M of VRAM memory ready
[drm] amdgpu: 8192M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
[drm] Chained IB support enabled!
amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
[drm] Found UVD firmware Version: 1.130 Family ID: 16
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC2D0: inputs:
snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 909000
[drm] DM_PPLIB: 1134000
[drm] DM_PPLIB: 1266000
[drm] DM_PPLIB: 1365000
[drm] DM_PPLIB: 1432000
[drm] DM_PPLIB: 1490000
[drm] DM_PPLIB: 1560000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 156000
[drm] DM_PPLIB: memory_max_clock: 210000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 400000
[drm] DM_PPLIB: 1000000
[drm] DM_PPLIB: 2100000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 156000
[drm] DM_PPLIB: memory_max_clock: 210000
[drm] DM_PPLIB: level : 8
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/sound/card2/input20
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/sound/card2/input21
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/sound/card2/input22
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/sound/card2/input23
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/sound/card2/input24
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/sound/card2/input25
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/sound/card2/input26
[drm] Display Core initialized with v3.2.48!
snd_hda_intel 0000:0b:00.1: bound 0000:0b:00.0 (ops dm_ip_block [amdgpu])
be2net 0000:0c:00.0: FW config: function_mode=0x3, function_caps=0x7
[drm] DM_MST: Differing MST start on aconnector: 00000000a7a2140f [id: 59]
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
usbcore: registered new interface driver snd-usb-audio
[drm] UVD and UVD ENC initialized successfully.
be2net 0000:0c:00.0: Max: txqs 1, rxqs 5, rss 4, eqs 16, vfs 0
be2net 0000:0c:00.0: Max: uc-macs 30, mc-macs 64, vlans 64
be2net 0000:0c:00.0: enabled 1 MSI-x vector(s) for NIC
[drm] VCE initialized successfully.
kfd kfd: Allocated 3969056 bytes on gart
Virtual CRAT table created for GPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add dGPU node [0x67df:0x1002]
kfd kfd: added device 1002:67df
[drm] Cannot find any crtc or sizes
[drm] Initialized amdgpu 3.35.0 20150101 for 0000:0b:00.0 on minor 0
be2net 0000:0c:00.0: created 1 TX queue(s)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
be2net 0000:0c:00.0: created 1 RX queue(s)
igb 0000:05:00.0 enp5s0: renamed from eth0
be2net 0000:0c:00.0: FW version is 4.1.450.16
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
be2net 0000:0c:00.0: HW Flow control - TX:1 RX:1
be2net 0000:0c:00.0: Adapter does not support HW error recovery
be2net 0000:0c:00.0: Emulex OneConnect: PF port 1
be2net 0000:0c:00.1: be2net version is 12.0.0.0
be2net 0000:0c:00.1: PCIe error reporting enabled
elogind-daemon[2010]: New seat seat0.
elogind-daemon[2010]: Watching system buttons on /dev/input/event1 (Power Button)
elogind-daemon[2010]: Watching system buttons on /dev/input/event0 (Power Button)
elogind-daemon[2010]: Watching system buttons on /dev/input/event5 (Logitech Gaming Mouse G502 Keyboard)
elogind-daemon[2010]: Watching system buttons on /dev/input/event6 (Logitech Gaming Mouse G502 Consumer Control)
elogind-daemon[2010]: Watching system buttons on /dev/input/event7 (Logitech Gaming Mouse G502 System Control)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
[drm] DM_MST: added connector: 00000000bfe4b5bc [id: 77] [master: 00000000a7a2140f]
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
be2net 0000:0c:00.1: FW config: function_mode=0x3, function_caps=0x7
[drm] DM_MST: added connector: 00000000f260e36b [id: 82] [master: 00000000a7a2140f]
[drm] fb mappable at 0xE0830000
[drm] vram apper at 0xE0000000
[drm] size 19906560
[drm] fb depth is 24
[drm] pitch is 13824
fbcon: amdgpudrmfb (fb0) is primary device
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
be2net 0000:0c:00.1: Max: txqs 1, rxqs 5, rss 4, eqs 16, vfs 0
be2net 0000:0c:00.1: Max: uc-macs 30, mc-macs 64, vlans 64
be2net 0000:0c:00.1: enabled 1 MSI-x vector(s) for NIC
be2net 0000:0c:00.1: created 1 TX queue(s)
be2net 0000:0c:00.1: created 1 RX queue(s)
be2net 0000:0c:00.1: FW version is 4.1.450.16
be2net 0000:0c:00.1: HW Flow control - TX:1 RX:1
be2net 0000:0c:00.1: Adapter does not support HW error recovery
be2net 0000:0c:00.1: Emulex OneConnect: PF port 2
be2net 0000:0c:00.0 enp12s0f0: renamed from eth0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
be2net 0000:0c:00.1 enp12s0f1: renamed from eth1
be2net 0000:0c:00.0 enp12s0f0: Link is Up
be2net 0000:0c:00.0 enp12s0f0: Link is Up
be2net 0000:0c:00.1 enp12s0f1: Link is Down
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
Console: switching to colour frame buffer device 215x45
amdgpu 0000:0b:00.0: fb0: amdgpudrmfb frame buffer device
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
tun: Universal TUN/TAP device driver, 1.6
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
br-9a6bad8e2e01: port 1(veth7f71cd9) entered blocking state
br-9a6bad8e2e01: port 1(veth7f71cd9) entered disabled state
device veth7f71cd9 entered promiscuous mode
br-9a6bad8e2e01: port 1(veth7f71cd9) entered blocking state
br-9a6bad8e2e01: port 1(veth7f71cd9) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br-9a6bad8e2e01: link becomes ready
br-9a6bad8e2e01: port 1(veth7f71cd9) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): veth7f71cd9: link becomes ready
br-9a6bad8e2e01: port 1(veth7f71cd9) entered blocking state
br-9a6bad8e2e01: port 1(veth7f71cd9) entered forwarding state
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
eth0: renamed from veth887bded
br-9a6bad8e2e01: port 1(veth7f71cd9) entered disabled state
br-9a6bad8e2e01: port 1(veth7f71cd9) entered blocking state
br-9a6bad8e2e01: port 1(veth7f71cd9) entered forwarding state
br0: renamed from ov-001000-3jnqt
vxlan0: renamed from vx-001000-3jnqt
br0: port 1(vxlan0) entered blocking state
br0: port 1(vxlan0) entered disabled state
device vxlan0 entered promiscuous mode
br0: port 1(vxlan0) entered blocking state
br0: port 1(vxlan0) entered forwarding state
veth0: renamed from vethef956d0
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered disabled state
device veth0 entered promiscuous mode
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered forwarding state
br0: port 2(veth0) entered disabled state
eth0: renamed from veth282dbb1
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered forwarding state
docker_gwbridge: port 1(veth002d9f8) entered blocking state
docker_gwbridge: port 1(veth002d9f8) entered disabled state
device veth002d9f8 entered promiscuous mode
docker_gwbridge: port 1(veth002d9f8) entered blocking state
docker_gwbridge: port 1(veth002d9f8) entered forwarding state
docker_gwbridge: port 1(veth002d9f8) entered disabled state
eth1: renamed from veth0622a59
IPv6: ADDRCONF(NETDEV_CHANGE): veth002d9f8: link becomes ready
docker_gwbridge: port 1(veth002d9f8) entered blocking state
docker_gwbridge: port 1(veth002d9f8) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker_gwbridge: link becomes ready
IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
IPVS: ipvs loaded.
IPVS: [rr] scheduler registered.
br0: renamed from ov-001011-ss37w
vxlan0: renamed from vx-001011-ss37w
br0: port 1(vxlan0) entered blocking state
br0: port 1(vxlan0) entered disabled state
device vxlan0 entered promiscuous mode
br0: port 1(vxlan0) entered blocking state
br0: port 1(vxlan0) entered forwarding state
veth0: renamed from vethb025316
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered disabled state
device veth0 entered promiscuous mode
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered forwarding state
br0: port 2(veth0) entered disabled state
eth0: renamed from veth05de75f
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered forwarding state
br0: port 2(veth0) entered disabled state
br0: port 1(vxlan0) entered disabled state
ov-001011-ss37w: renamed from br0
device veth0 left promiscuous mode
ov-001011-ss37w: port 2(veth0) entered disabled state
device vxlan0 left promiscuous mode
ov-001011-ss37w: port 1(vxlan0) entered disabled state
vx-001011-ss37w: renamed from vxlan0
vethb025316: renamed from veth0
IPv6: ADDRCONF(NETDEV_CHANGE): vethb025316: link becomes ready
veth05de75f: renamed from eth0
br0: renamed from ov-001007-oh3wa
vxlan0: renamed from vx-001007-oh3wa
br0: port 1(vxlan0) entered blocking state
br0: port 1(vxlan0) entered disabled state
device vxlan0 entered promiscuous mode
br0: port 1(vxlan0) entered blocking state
br0: port 1(vxlan0) entered forwarding state
veth0: renamed from veth2fbff1a
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered disabled state
device veth0 entered promiscuous mode
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered forwarding state
br0: port 2(veth0) entered disabled state
eth0: renamed from veth4d26380
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered forwarding state
veth1: renamed from veth89859fb
br0: port 3(veth1) entered blocking state
br0: port 3(veth1) entered disabled state
device veth1 entered promiscuous mode
br0: port 3(veth1) entered blocking state
br0: port 3(veth1) entered forwarding state
docker_gwbridge: port 2(veth91c0920) entered blocking state
docker_gwbridge: port 2(veth91c0920) entered disabled state
device veth91c0920 entered promiscuous mode
docker_gwbridge: port 2(veth91c0920) entered blocking state
docker_gwbridge: port 2(veth91c0920) entered forwarding state
docker_gwbridge: port 2(veth91c0920) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): veth91c0920: link becomes ready
docker_gwbridge: port 2(veth91c0920) entered blocking state
docker_gwbridge: port 2(veth91c0920) entered forwarding state
docker_gwbridge: port 2(veth91c0920) entered disabled state
device veth91c0920 left promiscuous mode
docker_gwbridge: port 2(veth91c0920) entered disabled state
br0: port 3(veth1) entered disabled state
device veth1 left promiscuous mode
br0: port 3(veth1) entered disabled state
br0: renamed from ov-001011-ss37w
vxlan0: renamed from vx-001011-ss37w
br0: port 1(vxlan0) entered blocking state
br0: port 1(vxlan0) entered disabled state
device vxlan0 entered promiscuous mode
br0: port 1(vxlan0) entered blocking state
br0: port 1(vxlan0) entered forwarding state
veth0: renamed from veth60e09ae
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered disabled state
device veth0 entered promiscuous mode
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered forwarding state
eth0: renamed from veth5c50a6d
br0: port 2(veth0) entered disabled state
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered forwarding state
veth2: renamed from vethfb1c8b8
br0: port 3(veth2) entered blocking state
br0: port 3(veth2) entered disabled state
device veth2 entered promiscuous mode
br0: port 3(veth2) entered blocking state
br0: port 3(veth2) entered forwarding state
docker_gwbridge: port 2(veth21eab88) entered blocking state
docker_gwbridge: port 2(veth21eab88) entered disabled state
device veth21eab88 entered promiscuous mode
docker_gwbridge: port 2(veth21eab88) entered blocking state
docker_gwbridge: port 2(veth21eab88) entered forwarding state
docker_gwbridge: port 2(veth21eab88) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): veth21eab88: link becomes ready
docker_gwbridge: port 2(veth21eab88) entered blocking state
docker_gwbridge: port 2(veth21eab88) entered forwarding state
veth1: renamed from vethac95043
br0: port 3(veth1) entered blocking state
br0: port 3(veth1) entered disabled state
device veth1 entered promiscuous mode
br0: port 3(veth1) entered blocking state
br0: port 3(veth1) entered forwarding state
br0: port 3(veth1) entered disabled state
eth0: renamed from vethab27d9b
br0: port 3(veth1) entered blocking state
br0: port 3(veth1) entered forwarding state
br0: port 3(veth2) entered disabled state
eth1: renamed from veth008a2bd
br0: port 3(veth2) entered blocking state
br0: port 3(veth2) entered forwarding state
docker_gwbridge: port 2(veth21eab88) entered disabled state
eth2: renamed from veth4a57cf1
docker_gwbridge: port 2(veth21eab88) entered blocking state
docker_gwbridge: port 2(veth21eab88) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): veth16ba86b: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): veth736fa3e: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): veth9e20f02: link becomes ready
veth1: renamed from veth16ba86b
br0: port 3(veth1) entered blocking state
br0: port 3(veth1) entered disabled state
device veth1 entered promiscuous mode
br0: port 3(veth1) entered blocking state
br0: port 3(veth1) entered forwarding state
veth3: renamed from veth9e20f02
br0: port 4(veth3) entered blocking state
br0: port 4(veth3) entered disabled state
device veth3 entered promiscuous mode
br0: port 4(veth3) entered blocking state
br0: port 4(veth3) entered forwarding state
docker_gwbridge: port 3(veth453cb5b) entered blocking state
docker_gwbridge: port 3(veth453cb5b) entered disabled state
device veth453cb5b entered promiscuous mode
docker_gwbridge: port 3(veth453cb5b) entered blocking state
docker_gwbridge: port 3(veth453cb5b) entered forwarding state
docker_gwbridge: port 4(veth96ece7d) entered blocking state
docker_gwbridge: port 4(veth96ece7d) entered disabled state
device veth96ece7d entered promiscuous mode
docker_gwbridge: port 4(veth96ece7d) entered blocking state
docker_gwbridge: port 4(veth96ece7d) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): veth453cb5b: link becomes ready
docker_gwbridge: port 4(veth96ece7d) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): veth96ece7d: link becomes ready
docker_gwbridge: port 4(veth96ece7d) entered blocking state
docker_gwbridge: port 4(veth96ece7d) entered forwarding state
veth2: renamed from vethcc35ca8
br0: port 4(veth2) entered blocking state
br0: port 4(veth2) entered disabled state
device veth2 entered promiscuous mode
br0: port 4(veth2) entered blocking state
br0: port 4(veth2) entered forwarding state
br0: port 3(veth1) entered disabled state
eth0: renamed from veth736fa3e
br0: port 3(veth1) entered blocking state
br0: port 3(veth1) entered forwarding state
docker_gwbridge: port 4(veth96ece7d) entered disabled state
eth1: renamed from veth92e8efd
docker_gwbridge: port 4(veth96ece7d) entered blocking state
docker_gwbridge: port 4(veth96ece7d) entered forwarding state
eth0: renamed from veth425ebed
br0: port 4(veth2) entered disabled state
br0: port 4(veth2) entered blocking state
br0: port 4(veth2) entered forwarding state
br0: port 4(veth3) entered disabled state
eth1: renamed from veth18a9695
br0: port 4(veth3) entered blocking state
br0: port 4(veth3) entered forwarding state
docker_gwbridge: port 3(veth453cb5b) entered disabled state
eth2: renamed from vethc9e3382
docker_gwbridge: port 3(veth453cb5b) entered blocking state
docker_gwbridge: port 3(veth453cb5b) entered forwarding state
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: Using legacy client tracking operations.
NFSD: starting 90-second grace period (net f0000098)
zram: Added device: zram0
zram0: detected capacity change from 0 to 10737418240
Adding 10485756k swap on /dev/zram0. Priority:10 extents:1 across:10485756k SSFS
elogind-daemon[2010]: New session 1 of user kdb424.
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
xdg-desktop-por[7241]: segfault at 8 ip 000055e32136b1a3 sp 00007ffd70fe5920 error 4 in xdg-desktop-portal-wlr[55e321368000+9000]
Code: ff eb d6 48 8b 15 dd a4 00 00 eb dd 66 66 2e 0f 1f 84 00 00 00 00 00 41 56 41 55 4c 8d 77 18 41 54 55 49 89 fc 53 48 8b 5f 20 8b 6b 08 48 89 df 4c 39 f3 75 14 eb 47 66 66 2e 0f 1f 84 00 00
xdg-desktop-por[7244]: segfault at 8 ip 0000555f11daa1a3 sp 00007ffd8435a280 error 4 in xdg-desktop-portal-wlr[555f11da7000+9000]
Code: ff eb d6 48 8b 15 dd a4 00 00 eb dd 66 66 2e 0f 1f 84 00 00 00 00 00 41 56 41 55 4c 8d 77 18 41 54 55 49 89 fc 53 48 8b 5f 20 8b 6b 08 48 89 df 4c 39 f3 75 14 eb 47 66 66 2e 0f 1f 84 00 00
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
be2net 0000:0c:00.1 enp12s0f1: Link is Down
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
GpuWatchdog[14353]: segfault at 0 ip 0000560279125519 sp 00007f681eb90760 error 6 in Discord[5602757da000+5cbb000]
Code: 00 79 09 48 8b 7d c0 e8 25 24 be fe c7 45 c0 aa aa aa aa 0f ae f0 41 8b 84 24 e0 00 00 00 89 45 c0 48 8d 7d c0 e8 17 54 6b fc 04 25 00 00 00 00 37 13 00 00 48 83 c4 38 5b 41 5c 41 5d 41 5e
GpuWatchdog[9631]: segfault at 0 ip 0000560279125519 sp 00007f681eb90760 error 6 in Discord[5602757da000+5cbb000]
Code: 00 79 09 48 8b 7d c0 e8 25 24 be fe c7 45 c0 aa aa aa aa 0f ae f0 41 8b 84 24 e0 00 00 00 89 45 c0 48 8d 7d c0 e8 17 54 6b fc 04 25 00 00 00 00 37 13 00 00 48 83 c4 38 5b 41 5c 41 5d 41 5e
GpuWatchdog[10573]: segfault at 0 ip 0000560279125519 sp 00007f681eb90760 error 6 in Discord[5602757da000+5cbb000]
Code: 00 79 09 48 8b 7d c0 e8 25 24 be fe c7 45 c0 aa aa aa aa 0f ae f0 41 8b 84 24 e0 00 00 00 89 45 c0 48 8d 7d c0 e8 17 54 6b fc 04 25 00 00 00 00 37 13 00 00 48 83 c4 38 5b 41 5c 41 5d 41 5e
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
usb 5-2: USB disconnect, device number 2
usb 5-2: new full-speed USB device number 4 using xhci_hcd
usb 5-2: New USB device found, idVendor=03eb, idProduct=2ff4, bcdDevice= 0.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: ATm32U4DFU
usb 5-2: Manufacturer: ATMEL
usb 5-2: SerialNumber: 1.0.0
usb 5-2: USB disconnect, device number 4
usb 5-2: new full-speed USB device number 5 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0006/input/input27
hid-generic 0003:FEED:3060.0006: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 5
usb 5-2: new full-speed USB device number 6 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0007/input/input28
hid-generic 0003:FEED:3060.0007: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
perf: interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 78900
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Unexpected flush for atomic writes: ino=1118357, npages=1
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
usb 5-2: USB disconnect, device number 6
usb 5-2: new full-speed USB device number 7 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0008/input/input29
hid-generic 0003:FEED:3060.0008: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 7
usb 5-2: new full-speed USB device number 8 using xhci_hcd
usb 5-2: New USB device found, idVendor=03eb, idProduct=2ff4, bcdDevice= 0.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: ATm32U4DFU
usb 5-2: Manufacturer: ATMEL
usb 5-2: SerialNumber: 1.0.0
usb 5-2: USB disconnect, device number 8
usb 5-2: new full-speed USB device number 9 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0009/input/input30
hid-generic 0003:FEED:3060.0009: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 9
usb 5-2: new full-speed USB device number 10 using xhci_hcd
usb 5-2: New USB device found, idVendor=03eb, idProduct=2ff4, bcdDevice= 0.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: ATm32U4DFU
usb 5-2: Manufacturer: ATMEL
usb 5-2: SerialNumber: 1.0.0
usb 5-2: USB disconnect, device number 10
usb 5-2: new full-speed USB device number 11 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.000A/input/input31
hid-generic 0003:FEED:3060.000A: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 11
usb 5-2: new full-speed USB device number 12 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.000B/input/input32
hid-generic 0003:FEED:3060.000B: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 12
usb 5-2: new full-speed USB device number 13 using xhci_hcd
usb 5-2: New USB device found, idVendor=03eb, idProduct=2ff4, bcdDevice= 0.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: ATm32U4DFU
usb 5-2: Manufacturer: ATMEL
usb 5-2: SerialNumber: 1.0.0
usb 5-2: USB disconnect, device number 13
usb 5-2: new full-speed USB device number 14 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.000C/input/input33
hid-generic 0003:FEED:3060.000C: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 14
usb 5-2: new full-speed USB device number 15 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.000D/input/input34
hid-generic 0003:FEED:3060.000D: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 15
usb 5-2: new full-speed USB device number 16 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.000E/input/input35
hid-generic 0003:FEED:3060.000E: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 16
usb 5-2: new full-speed USB device number 17 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.000F/input/input36
hid-generic 0003:FEED:3060.000F: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 17
usb 5-2: new full-speed USB device number 18 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0010/input/input37
hid-generic 0003:FEED:3060.0010: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
i2c /dev entries driver
i2c /dev entries driver
asus_wmi_sensors: loading out-of-tree module taints kernel.
asuswmisensors: Vendor: ASUSTeK COMPUTER INC. Board: CROSSHAIR VI HERO BIOS version: 7601 WMI version: 3
asuswmisensors: Supported board
asuswmisensors: ASUS WMI sensors driver loaded
usb 5-2: USB disconnect, device number 18
usb 5-2: new full-speed USB device number 19 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0011/input/input38
hid-generic 0003:FEED:3060.0011: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
kodi-wayland[8504]: segfault at 0 ip 00007f8f13c907ca sp 00007ffc2714efa0 error 4 in liblcms2.so.2.0.10[7f8f13c74000+37000]
Code: e9 79 fe ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec 28 41 b8 08 00 00 00 64 48 8b 04 25 28 00 00 00 48 89 44 24 18 31 c0 07 48 c7 04 24 00 00 00 00 49 89 e1 83 e0 07 41 0f 44 c0 0f af
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
[drm] DM_MST: stopping TM on aconnector: 00000000a7a2140f [id: 59]
[drm] DM_MST: Disabling connector: 00000000bfe4b5bc [id: 77] [master: 00000000a7a2140f]
[drm] DM_MST: Disabling connector: 00000000f260e36b [id: 82] [master: 00000000a7a2140f]
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
[drm] DM_MST: starting TM on aconnector: 00000000a7a2140f [id: 59]
[drm] DM_MST: added connector: 000000004b949ac1 [id: 82] [master: 00000000a7a2140f]
[drm] amdgpu_dm_irq_schedule_work FAILED src 12
[drm] amdgpu_dm_irq_schedule_work FAILED src 12
[drm] DM_MST: added connector: 000000000a3d1822 [id: 91] [master: 00000000a7a2140f]
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
be2net 0000:0c:00.0 enp12s0f0: Link is Down
be2net 0000:0c:00.0 enp12s0f0: Link is Up
be2net 0000:0c:00.0 enp12s0f0: Link is Up
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
[drm] DM_MST: stopping TM on aconnector: 00000000a7a2140f [id: 59]
[drm] DM_MST: Disabling connector: 000000004b949ac1 [id: 82] [master: 00000000a7a2140f]
[drm] DM_MST: Disabling connector: 000000000a3d1822 [id: 91] [master: 00000000a7a2140f]
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
[drm] DM_MST: starting TM on aconnector: 00000000a7a2140f [id: 59]
[drm] DM_MST: added connector: 00000000f2bdb1c7 [id: 82] [master: 00000000a7a2140f]
[drm] amdgpu_dm_irq_schedule_work FAILED src 12
[drm] DM_MST: added connector: 000000006a08a556 [id: 97] [master: 00000000a7a2140f]
usb 5-1: new full-speed USB device number 20 using xhci_hcd
usb 5-1: New USB device found, idVendor=1050, idProduct=0407, bcdDevice= 4.37
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Yubikey 4 OTP+U2F+CCID
usb 5-1: Manufacturer: Yubico
input: Yubico Yubikey 4 OTP+U2F+CCID as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-1/5-1:1.0/0003:1050:0407.0012/input/input39
hid-generic 0003:1050:0407.0012: input,hidraw5: USB HID v1.10 Keyboard [Yubico Yubikey 4 OTP+U2F+CCID] on usb-0000:0d:00.3-1/input0
hid-generic 0003:1050:0407.0013: hiddev98,hidraw6: USB HID v1.10 Device [Yubico Yubikey 4 OTP+U2F+CCID] on usb-0000:0d:00.3-1/input1
usb 5-1: USB disconnect, device number 20
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
perf: interrupt took too long (3165 > 3158), lowering kernel.perf_event_max_sample_rate to 63000
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
[drm] DM_MST: stopping TM on aconnector: 00000000a7a2140f [id: 59]
[drm] DM_MST: Disabling connector: 00000000f2bdb1c7 [id: 82] [master: 00000000a7a2140f]
[drm] DM_MST: Disabling connector: 000000006a08a556 [id: 97] [master: 00000000a7a2140f]
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
[drm] DM_MST: starting TM on aconnector: 00000000a7a2140f [id: 59]
[drm] DM_MST: added connector: 00000000782b0210 [id: 82] [master: 00000000a7a2140f]
[drm] amdgpu_dm_irq_schedule_work FAILED src 12
[drm] DM_MST: added connector: 00000000ea8dc02e [id: 103] [master: 00000000a7a2140f]
usb 5-1: new full-speed USB device number 21 using xhci_hcd
usb 5-1: New USB device found, idVendor=1050, idProduct=0407, bcdDevice= 4.37
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Yubikey 4 OTP+U2F+CCID
usb 5-1: Manufacturer: Yubico
input: Yubico Yubikey 4 OTP+U2F+CCID as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-1/5-1:1.0/0003:1050:0407.0014/input/input40
hid-generic 0003:1050:0407.0014: input,hidraw5: USB HID v1.10 Keyboard [Yubico Yubikey 4 OTP+U2F+CCID] on usb-0000:0d:00.3-1/input0
hid-generic 0003:1050:0407.0015: hiddev98,hidraw6: USB HID v1.10 Device [Yubico Yubikey 4 OTP+U2F+CCID] on usb-0000:0d:00.3-1/input1
usb 5-1: USB disconnect, device number 21
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
usb 5-2: USB disconnect, device number 19
usb 5-2: new full-speed USB device number 22 using xhci_hcd
usb 5-2: New USB device found, idVendor=03eb, idProduct=2ff4, bcdDevice= 0.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: ATm32U4DFU
usb 5-2: Manufacturer: ATMEL
usb 5-2: SerialNumber: 1.0.0
usb 5-2: USB disconnect, device number 22
usb 5-2: new full-speed USB device number 23 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0016/input/input41
hid-generic 0003:FEED:3060.0016: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb usb5-port2: disabled by hub (EMI?), re-enabling...
usb 5-2: USB disconnect, device number 23
usb 5-2: new full-speed USB device number 24 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0017/input/input42
hid-generic 0003:FEED:3060.0017: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 24
usb 5-2: new full-speed USB device number 25 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0018/input/input43
hid-generic 0003:FEED:3060.0018: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 25
usb 5-2: new full-speed USB device number 26 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0019/input/input44
hid-generic 0003:FEED:3060.0019: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 26
usb 5-2: new full-speed USB device number 27 using xhci_hcd
usb 5-2: New USB device found, idVendor=03eb, idProduct=2ff4, bcdDevice= 0.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: ATm32U4DFU
usb 5-2: Manufacturer: ATMEL
usb 5-2: SerialNumber: 1.0.0
usb 5-2: USB disconnect, device number 27
usb 5-2: new full-speed USB device number 28 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.001A/input/input45
hid-generic 0003:FEED:3060.001A: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
usb 5-2: USB disconnect, device number 28
elogind-daemon[2010]: Failed to open /dev/input/event2: No such device
usb 5-2: new full-speed USB device number 29 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.001B/input/input46
hid-generic 0003:FEED:3060.001B: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 29
usb 5-2: new full-speed USB device number 30 using xhci_hcd
usb 5-2: New USB device found, idVendor=03eb, idProduct=2ff4, bcdDevice= 0.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: ATm32U4DFU
usb 5-2: Manufacturer: ATMEL
usb 5-2: SerialNumber: 1.0.0
usb 5-2: USB disconnect, device number 30
usb 5-2: new full-speed USB device number 31 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.001C/input/input47
hid-generic 0003:FEED:3060.001C: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 31
usb 5-2: new full-speed USB device number 32 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.001D/input/input48
hid-generic 0003:FEED:3060.001D: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 32
usb 5-2: new full-speed USB device number 33 using xhci_hcd
usb 5-2: New USB device found, idVendor=03eb, idProduct=2ff4, bcdDevice= 0.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: ATm32U4DFU
usb 5-2: Manufacturer: ATMEL
usb 5-2: SerialNumber: 1.0.0
usb 5-2: USB disconnect, device number 33
usb 5-2: new full-speed USB device number 34 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.001E/input/input49
hid-generic 0003:FEED:3060.001E: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 34
usb 5-2: new full-speed USB device number 35 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.001F/input/input50
hid-generic 0003:FEED:3060.001F: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 35
usb 5-2: new full-speed USB device number 36 using xhci_hcd
usb 5-2: New USB device found, idVendor=03eb, idProduct=2ff4, bcdDevice= 0.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: ATm32U4DFU
usb 5-2: Manufacturer: ATMEL
usb 5-2: SerialNumber: 1.0.0
usb 5-2: USB disconnect, device number 36
usb 5-2: new full-speed USB device number 37 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0020/input/input51
hid-generic 0003:FEED:3060.0020: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 37
usb 5-2: new full-speed USB device number 38 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0021/input/input52
hid-generic 0003:FEED:3060.0021: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 38
usb 5-2: new full-speed USB device number 39 using xhci_hcd
usb 5-2: New USB device found, idVendor=03eb, idProduct=2ff4, bcdDevice= 0.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: ATm32U4DFU
usb 5-2: Manufacturer: ATMEL
usb 5-2: SerialNumber: 1.0.0
usb 5-2: USB disconnect, device number 39
usb 5-2: new full-speed USB device number 40 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0022/input/input53
hid-generic 0003:FEED:3060.0022: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 40
usb 5-2: new full-speed USB device number 41 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0023/input/input54
hid-generic 0003:FEED:3060.0023: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 41
usb 5-2: new full-speed USB device number 42 using xhci_hcd
usb 5-2: New USB device found, idVendor=03eb, idProduct=2ff4, bcdDevice= 0.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: ATm32U4DFU
usb 5-2: Manufacturer: ATMEL
usb 5-2: SerialNumber: 1.0.0
usb 5-2: USB disconnect, device number 42
usb 5-2: new full-speed USB device number 43 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0024/input/input55
hid-generic 0003:FEED:3060.0024: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 43
usb 5-2: new full-speed USB device number 44 using xhci_hcd
usb 5-2: Device not responding to setup address.
usb 5-2: Device not responding to setup address.
usb 5-2: device not accepting address 44, error -71
usb 5-2: new full-speed USB device number 45 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0025/input/input56
hid-generic 0003:FEED:3060.0025: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 45
usb 5-2: new full-speed USB device number 46 using xhci_hcd
usb 5-2: New USB device found, idVendor=03eb, idProduct=2ff4, bcdDevice= 0.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: ATm32U4DFU
usb 5-2: Manufacturer: ATMEL
usb 5-2: SerialNumber: 1.0.0
usb 5-2: USB disconnect, device number 46
usb 5-2: new full-speed USB device number 47 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0026/input/input57
hid-generic 0003:FEED:3060.0026: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
usb 5-2: USB disconnect, device number 47
usb 5-2: new full-speed USB device number 48 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0027/input/input58
hid-generic 0003:FEED:3060.0027: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
[drm] DM_MST: stopping TM on aconnector: 00000000a7a2140f [id: 59]
[drm] DM_MST: Disabling connector: 00000000782b0210 [id: 82] [master: 00000000a7a2140f]
[drm] DM_MST: Disabling connector: 00000000ea8dc02e [id: 103] [master: 00000000a7a2140f]
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
[drm] DM_MST: starting TM on aconnector: 00000000a7a2140f [id: 59]
[drm] DM_MST: added connector: 00000000fd1d71ac [id: 82] [master: 00000000a7a2140f]
[drm] amdgpu_dm_irq_schedule_work FAILED src 12
[drm] amdgpu_dm_irq_schedule_work FAILED src 12
[drm] DM_MST: added connector: 000000009025c300 [id: 109] [master: 00000000a7a2140f]
usb 5-2: USB disconnect, device number 48
usb 5-2: new full-speed USB device number 49 using xhci_hcd
usb 5-2: New USB device found, idVendor=03eb, idProduct=2ff4, bcdDevice= 0.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: ATm32U4DFU
usb 5-2: Manufacturer: ATMEL
usb 5-2: SerialNumber: 1.0.0
usb 5-2: USB disconnect, device number 49
usb 5-2: new full-speed USB device number 50 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.0028/input/input59
hid-generic 0003:FEED:3060.0028: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
traps: Chrome_IOThread[14240] trap invalid opcode ip:563ee9f44724 sp:7efc67afdf50 error:0 in Discord[563ee7aaf000+5cbb000]
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
usb 5-2: USB disconnect, device number 50
usb 5-2: new full-speed USB device number 51 using xhci_hcd
usb 5-2: device descriptor read/64, error -71
usb 5-2: device descriptor read/64, error -71
usb 5-2: new full-speed USB device number 52 using xhci_hcd
usb 5-2: device descriptor read/64, error -71
usb 5-2: new full-speed USB device number 53 using xhci_hcd
usb 5-2: New USB device found, idVendor=cb10, idProduct=1267, bcdDevice= 1.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Sinc Rev. 1
usb 5-2: Manufacturer: Keebio
usb 5-2: SerialNumber: 0
input: Keebio Sinc Rev. 1 as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:CB10:1267.0029/input/input60
hid-generic 0003:CB10:1267.0029: input,hidraw0: USB HID v1.11 Keyboard [Keebio Sinc Rev. 1] on usb-0000:0d:00.3-2/input0
input: Keebio Sinc Rev. 1 as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.1/0003:CB10:1267.002A/input/input61
hid-generic 0003:CB10:1267.002A: input,hidraw5: USB HID v1.11 Mouse [Keebio Sinc Rev. 1] on usb-0000:0d:00.3-2/input1
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (Keebio Sinc Rev. 1)
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
usb 5-2: USB disconnect, device number 53
usb 5-2: new full-speed USB device number 54 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.002B/input/input62
hid-generic 0003:FEED:3060.002B: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
usb usb5-port2: disabled by hub (EMI?), re-enabling...
usb 5-2: USB disconnect, device number 54
usb 5-2: new full-speed USB device number 55 using xhci_hcd
usb 5-2: Device not responding to setup address.
usb 5-2: Device not responding to setup address.
usb 5-2: device not accepting address 55, error -71
usb 5-2: new full-speed USB device number 56 using xhci_hcd
usb 5-2: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Corne Keyboard (crkbd)
usb 5-2: Manufacturer: foostan
usb 5-2: SerialNumber: 0
input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:07.1/0000:0d:00.3/usb5/5-2/5-2:1.0/0003:FEED:3060.002C/input/input63
hid-generic 0003:FEED:3060.002C: input,hidraw0: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:0d:00.3-2/input0
elogind-daemon[2010]: Watching system buttons on /dev/input/event2 (foostan Corne Keyboard (crkbd))
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.
perf: interrupt took too long (3976 > 3956), lowering kernel.perf_event_max_sample_rate to 50100
F2FS-fs (nvme0n1p2): Found FS corruption, run fsck to fix.