dmesg - benchmark_basis_system
microcode: microcode updated early to revision 0xd6, date = 2020-04-27
Linux version 5.8.12-master2ACDI (root@dG82) (gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, GNU ld (GNU Binutils for Ubuntu) 2.26.1) #9 SMP Sun Nov 8 13:57:08 CET 2020
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000005dfff] usable
BIOS-e820: [mem 0x000000000005e000-0x000000000005efff] reserved
BIOS-e820: [mem 0x000000000005f000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000044f2ffff] usable
BIOS-e820: [mem 0x0000000044f30000-0x0000000044f30fff] ACPI NVS
BIOS-e820: [mem 0x0000000044f31000-0x0000000044f31fff] reserved
BIOS-e820: [mem 0x0000000044f32000-0x00000000549a1fff] usable
BIOS-e820: [mem 0x00000000549a2000-0x00000000577b5fff] reserved
BIOS-e820: [mem 0x00000000577b6000-0x0000000057832fff] ACPI data
BIOS-e820: [mem 0x0000000057833000-0x00000000581a7fff] ACPI NVS
BIOS-e820: [mem 0x00000000581a8000-0x0000000058dfefff] reserved
BIOS-e820: [mem 0x0000000058dff000-0x0000000058dfffff] usable
BIOS-e820: [mem 0x0000000058e00000-0x000000005f7fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000049c7fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x41d40018-0x41d79e57] usable ==> usable
e820: update [mem 0x41d40018-0x41d79e57] usable ==> usable
e820: update [mem 0x41d2f018-0x41d3f057] usable ==> usable
e820: update [mem 0x41d2f018-0x41d3f057] usable ==> usable
e820: update [mem 0x41d1e018-0x41d2e457] usable ==> usable
e820: update [mem 0x41d1e018-0x41d2e457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000005dfff] usable
reserve setup_data: [mem 0x000000000005e000-0x000000000005efff] reserved
reserve setup_data: [mem 0x000000000005f000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000041d1e017] usable
reserve setup_data: [mem 0x0000000041d1e018-0x0000000041d2e457] usable
reserve setup_data: [mem 0x0000000041d2e458-0x0000000041d2f017] usable
reserve setup_data: [mem 0x0000000041d2f018-0x0000000041d3f057] usable
reserve setup_data: [mem 0x0000000041d3f058-0x0000000041d40017] usable
reserve setup_data: [mem 0x0000000041d40018-0x0000000041d79e57] usable
reserve setup_data: [mem 0x0000000041d79e58-0x0000000044f2ffff] usable
reserve setup_data: [mem 0x0000000044f30000-0x0000000044f30fff] ACPI NVS
reserve setup_data: [mem 0x0000000044f31000-0x0000000044f31fff] reserved
reserve setup_data: [mem 0x0000000044f32000-0x00000000549a1fff] usable
reserve setup_data: [mem 0x00000000549a2000-0x00000000577b5fff] reserved
reserve setup_data: [mem 0x00000000577b6000-0x0000000057832fff] ACPI data
reserve setup_data: [mem 0x0000000057833000-0x00000000581a7fff] ACPI NVS
reserve setup_data: [mem 0x00000000581a8000-0x0000000058dfefff] reserved
reserve setup_data: [mem 0x0000000058dff000-0x0000000058dfffff] usable
reserve setup_data: [mem 0x0000000058e00000-0x000000005f7fffff] reserved
reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000049c7fffff] usable
efi: EFI v2.70 by American Megatrends
efi: ACPI 2.0=0x577cf000 ACPI=0x577cf000 SMBIOS=0x588aa000 SMBIOS 3.0=0x588a9000 ESRT=0x58847018 MEMATTR=0x52503018 RNG=0x58c20918
efi: seeding entropy pool
SMBIOS 3.1.1 present.
DMI: Dell Inc. Precision 7530/0YRWN0, BIOS 1.13.1 04/28/2020
tsc: Detected 2500.000 MHz processor
tsc: Detected 2499.952 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x49c800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 0060000000 mask 7FF0000000 write-combining
2 base 005C000000 mask 7FFC000000 uncachable
3 base 005B000000 mask 7FFF000000 uncachable
4 base 4000000000 mask 4000000000 uncachable
5 base 0070000000 mask 7FF0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x58e00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd0a0-0x000fd0af]
esrt: Reserving ESRT space from 0x0000000058847018 to 0x0000000058847050.
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
Secure boot disabled
RAMDISK: [mem 0x3f254000-0x3fffafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000577CF000 000024 (v02 DELL )
ACPI: XSDT 0x00000000577CF0C8 000114 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x0000000057812CF8 000114 (v06 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x00000000577CF270 043A84 (v02 DELL CBX3 01072009 INTL 20160527)
ACPI: FACS 0x00000000581A6C00 000040
ACPI: APIC 0x0000000057812E10 0000BC (v04 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x0000000057812ED0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FIDT 0x0000000057812F18 00009C (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x0000000057812FB8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: SSDT 0x0000000057812FF8 000761 (v01 SataRe SataTabl 00001000 INTL 20160527)
ACPI: SSDT 0x0000000057813760 0017DF (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
ACPI: BOOT 0x0000000057814F40 000028 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: SSDT 0x0000000057814F68 001336 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x00000000578162A0 00283A (v02 PegSsd PegSsdt 00001000 INTL 20160527)
ACPI: HPET 0x0000000057818AE0 000038 (v01 INTEL CBX3 00000002 01000013)
ACPI: SSDT 0x0000000057818B18 002A2F (v02 INTEL xh_cfhd4 00000000 INTL 20160527)
ACPI: UEFI 0x000000005781B548 000048 (v01 DELL\x CBX3 00000002 01000013)
ACPI: LPIT 0x000000005781B590 00005C (v01 INTEL CBX3 00000002 01000013)
ACPI: SSDT 0x000000005781B5F0 0027DE (v02 INTEL PtidDevc 00001000 INTL 20160527)
ACPI: SSDT 0x000000005781DDD0 00088A (v02 INTEL TbtTypeC 00000000 INTL 20160527)
ACPI: DBGP 0x000000005781E660 000034 (v01 DELL\x CBX3 00000002 01000013)
ACPI: DBG2 0x000000005781E698 000054 (v00 DELL\x CBX3 00000002 01000013)
ACPI: SSDT 0x000000005781E6F0 0007F2 (v02 DELL\x UsbCTabl 00001000 INTL 20160527)
ACPI: SSDT 0x000000005781EEE8 005ACD (v02 DptfTa DptfTabl 00001000 INTL 20160527)
ACPI: SSDT 0x00000000578249B8 000144 (v02 Intel ADebTabl 00001000 INTL 20160527)
ACPI: SSDT 0x0000000057824B00 0000AE (v02 SgRef SgPeg 00001000 INTL 20160527)
ACPI: DMAR 0x0000000057824BB0 0000A8 (v01 INTEL EDK2 00000002 01000013)
ACPI: ASF! 0x0000000057824C58 000074 (v32 DELL\x CBX3 00000002 01000013)
ACPI: SSDT 0x0000000057824CD0 0021D0 (v01 OptRef OptTabl 00001000 INTL 20160527)
ACPI: EINJ 0x0000000057826EA0 000130 (v01 AMI AMI.EINJ 00000000 AMI. 00000000)
ACPI: ERST 0x0000000057826FD0 000230 (v01 AMIER AMI.ERST 00000000 AMI. 00000000)
ACPI: BERT 0x0000000057827200 000030 (v01 AMI AMI.BERT 00000000 AMI. 00000000)
ACPI: HEST 0x0000000057827230 0000A8 (v01 AMI AMI.HEST 00000000 AMI. 00000000)
ACPI: BGRT 0x00000000578272D8 000038 (v00 \xfffffff3\xffffffee 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000049c7fffff]
NODE_DATA(0) allocated [mem 0x49c7fc000-0x49c7fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000049c7fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000005dfff]
node 0: [mem 0x000000000005f000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000044f2ffff]
node 0: [mem 0x0000000044f32000-0x00000000549a1fff]
node 0: [mem 0x0000000058dff000-0x0000000058dfffff]
node 0: [mem 0x0000000100000000-0x000000049c7fffff]
Zeroed struct page in unavailable ranges: 61121 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000049c7fffff]
On node 0 totalpages: 4133183
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 5351 pages used for memmap
DMA32 zone: 342433 pages, LIFO batch:63
Normal zone: 59168 pages used for memmap
Normal zone: 3786752 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x5b800000-0x5f7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x4f76b000-0x4f7f3fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0005e000-0x0005efff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x41d1e000-0x41d1efff]
PM: hibernation: Registered nosave memory: [mem 0x41d2e000-0x41d2efff]
PM: hibernation: Registered nosave memory: [mem 0x41d2f000-0x41d2ffff]
PM: hibernation: Registered nosave memory: [mem 0x41d3f000-0x41d3ffff]
PM: hibernation: Registered nosave memory: [mem 0x41d40000-0x41d40fff]
PM: hibernation: Registered nosave memory: [mem 0x41d79000-0x41d79fff]
PM: hibernation: Registered nosave memory: [mem 0x44f30000-0x44f30fff]
PM: hibernation: Registered nosave memory: [mem 0x44f31000-0x44f31fff]
PM: hibernation: Registered nosave memory: [mem 0x4f76b000-0x4f7f3fff]
PM: hibernation: Registered nosave memory: [mem 0x549a2000-0x577b5fff]
PM: hibernation: Registered nosave memory: [mem 0x577b6000-0x57832fff]
PM: hibernation: Registered nosave memory: [mem 0x57833000-0x581a7fff]
PM: hibernation: Registered nosave memory: [mem 0x581a8000-0x58dfefff]
PM: hibernation: Registered nosave memory: [mem 0x58e00000-0x5f7fffff]
PM: hibernation: Registered nosave memory: [mem 0x5f800000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x5f800000-0xefffffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 52 pages/cpu s172312 r8192 d32488 u262144
pcpu-alloc: s172312 r8192 d32488 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 4068576
Policy zone: Normal
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 16073748K/16532732K available (14340K kernel code, 1596K rwdata, 3124K rodata, 1180K init, 1132K bss, 458984K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
rcu: Hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16
random: get_random_bytes called from start_kernel+0x356/0x547 with crng_init=0
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200528
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x24090c9bc00, max_idle_ns: 440795288559 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.90 BogoMIPS (lpj=2499952)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
SELinux: Initializing.
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
TAA: Mitigation: Clear CPU buffers
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 44K
smpboot: CPU0: Intel(R) Core(TM) i5-8400H CPU @ 2.50GHz (family: 0x6, model: 0x9e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4
MDS CPU bug present and SMT on, data leak possible. See for more details.
TAA CPU bug present and SMT on, data leak possible. See for more details.
#5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (39999.23 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x44f30000-0x44f30fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x57833000-0x581a7fff] (9916416 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
xor: automatically using best checksumming function avx
PM: RTC time: 12:50:40, date: 2020-11-09
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1604926240.018:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
Simple Boot Flag at 0x47 set to 0x80
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptomgr_test (56) used greatest stack depth: 15680 bytes left
cryptomgr_test (64) used greatest stack depth: 15656 bytes left
raid6: avx2x4 gen() 40996 MB/s
raid6: avx2x4 xor() 14768 MB/s
raid6: avx2x2 gen() 41468 MB/s
raid6: avx2x2 xor() 27023 MB/s
raid6: avx2x1 gen() 36240 MB/s
raid6: avx2x1 xor() 18540 MB/s
raid6: sse2x4 gen() 17765 MB/s
raid6: sse2x4 xor() 10261 MB/s
raid6: sse2x2 gen() 18054 MB/s
raid6: sse2x2 xor() 11649 MB/s
raid6: sse2x1 gen() 15924 MB/s
raid6: sse2x1 xor() 8124 MB/s
raid6: using algorithm avx2x2 gen() 41468 MB/s
raid6: .... xor() 27023 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS11._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS11._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS12._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS12._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS13._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS13._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS14._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS14._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS07._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS07._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS08._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS08._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS09._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS09._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS10._UPC], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS10._PLD], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS11.CAMB], AE_ALREADY_EXISTS (20200528/dswload2-327)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200528/psobject-221)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x5B82)
ACPI: 13 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF97C90A3F1000 000621 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF97C90A0A4C00 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF97C90A1C2200 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF97C90A3F1800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF97C90A0A9000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF97C90A0A5000 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF97C90A0A5400 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [PIN] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PME]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x5f800000-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:00.0: [8086:3e10] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb4000000-0xb4ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x60000000-0x6fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0x404a100000-0x404a107fff 64bit]
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0x404a10f000-0x404a10ffff 64bit]
pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0xb5338000-0xb5338fff 64bit]
pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb5320000-0xb532ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0x404a108000-0x404a109fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0x404a10e000-0x404a10efff 64bit]
pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000
pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:15.1: [8086:a369] type 00 class 0x0c8000
pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x404a10b000-0x404a10bfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a353] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xb5334000-0xb5335fff]
pci 0000:00:17.0: reg 0x14: [mem 0xb5337000-0xb53370ff]
pci 0000:00:17.0: reg 0x18: [io 0x4090-0x4097]
pci 0000:00:17.0: reg 0x1c: [io 0x4080-0x4083]
pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:17.0: reg 0x24: [mem 0xb5336000-0xb53367ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a32c] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:a33d] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:a33e] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a30e] type 00 class 0x060100
pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xb5330000-0xb5333fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0x404a000000-0x404a0fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0x404a10a000-0x404a10a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:00:1f.6: [8086:15bb] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xb5300000-0xb531ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [10de:1cbb] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xb2000000-0xb2ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x70000000-0x7fffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
pci 0000:01:00.0: reg 0x30: [mem 0xb3000000-0xb307ffff pref]
pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xb3080000-0xb3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xb30fffff]
pci 0000:00:01.0: bridge window [mem 0x70000000-0x7fffffff 64bit pref]
pci 0000:02:00.0: [1179:0116] type 00 class 0x010802
pci 0000:02:00.0: reg 0x10: [mem 0xb5200000-0xb5203fff 64bit]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.0: bridge window [mem 0xb5200000-0xb52fffff]
pci 0000:00:1c.0: PCI bridge to [bus 03-6d]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0xae0fffff]
pci 0000:00:1c.0: bridge window [mem 0x4000000000-0x4049ffffff 64bit pref]
pci 0000:6e:00.0: [10ec:5260] type 00 class 0xff0000
pci 0000:6e:00.0: reg 0x10: [mem 0xb5100000-0xb5100fff]
pci 0000:6e:00.0: supports D1 D2
pci 0000:6e:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 6e]
pci 0000:00:1c.5: bridge window [mem 0xb5100000-0xb51fffff]
pci 0000:6f:00.0: [8086:2526] type 00 class 0x028000
pci 0000:6f:00.0: reg 0x10: [mem 0xb5000000-0xb5003fff 64bit]
pci 0000:6f:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: ASPM: current common clock configuration is inconsistent, reconfiguring
pci 0000:00:1c.6: PCI bridge to [bus 6f]
pci 0000:00:1c.6: bridge window [mem 0xb5000000-0xb50fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: EC: GPE=0x6e
ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
iommu: Default domain type: Translated
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:00:02.0: vgaarb: no bridge control possible
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Registered efivars operations
Advanced Linux Sound Architecture Driver Initialized.
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0005e000-0x0005ffff]
e820: reserve RAM buffer [mem 0x41d1e018-0x43ffffff]
e820: reserve RAM buffer [mem 0x41d2f018-0x43ffffff]
e820: reserve RAM buffer [mem 0x41d40018-0x43ffffff]
e820: reserve RAM buffer [mem 0x44f30000-0x47ffffff]
e820: reserve RAM buffer [mem 0x4f76b000-0x4fffffff]
e820: reserve RAM buffer [mem 0x549a2000-0x57ffffff]
e820: reserve RAM buffer [mem 0x58e00000-0x5bffffff]
e820: reserve RAM buffer [mem 0x49c800000-0x49fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x1800-0x18fe] could not be reserved
system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:05: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x2000-0x20fe] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03-6d] add_size 1000
pci 0000:00:15.0: BAR 0: assigned [mem 0x404a10c000-0x404a10cfff 64bit]
pci 0000:00:15.1: BAR 0: assigned [mem 0x404a10d000-0x404a10dfff 64bit]
pci 0000:00:1c.0: BAR 7: assigned [io 0x5000-0x5fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xb30fffff]
pci 0000:00:01.0: bridge window [mem 0x70000000-0x7fffffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.0: bridge window [mem 0xb5200000-0xb52fffff]
pci 0000:00:1c.0: PCI bridge to [bus 03-6d]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0xae0fffff]
pci 0000:00:1c.0: bridge window [mem 0x4000000000-0x4049ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 6e]
pci 0000:00:1c.5: bridge window [mem 0xb5100000-0xb51fffff]
pci 0000:00:1c.6: PCI bridge to [bus 6f]
pci 0000:00:1c.6: bridge window [mem 0xb5000000-0xb50fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x5f800000-0xefffffff window]
pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xb0000000-0xb30fffff]
pci_bus 0000:01: resource 2 [mem 0x70000000-0x7fffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xb5200000-0xb52fffff]
pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0x80000000-0xae0fffff]
pci_bus 0000:03: resource 2 [mem 0x4000000000-0x4049ffffff 64bit pref]
pci_bus 0000:6e: resource 1 [mem 0xb5100000-0xb51fffff]
pci_bus 0000:6f: resource 1 [mem 0xb5000000-0xb50fffff]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 13980K
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x000000585fd000 end: 0x00000058846fff
DMAR: RMRR base: 0x0000005b000000 end: 0x0000005f7fffff
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x4b76b000-0x4f76b000] (64MB)
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
check: Scanning for low memory corruption every 60 seconds
simple-framebuffer simple-framebuffer.0: framebuffer at 0x60000000, 0x7e9000 bytes, mapped to 0x0000000099cb96f9
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
Console: switching to colour frame buffer device 240x67
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
Initialise system trusted keyrings
workingset: timestamp_bits=56 max_order=22 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
ntfs: driver 2.1.32 [Flags: R/W].
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler mq-deadline registered
io scheduler kyber registered
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: \_SB_.PR00: Found 3 idle states
ACPI: \_SB_.PR01: Found 3 idle states
ACPI: \_SB_.PR02: Found 3 idle states
ACPI: \_SB_.PR03: Found 3 idle states
ACPI: \_SB_.PR04: Found 3 idle states
ACPI: \_SB_.PR05: Found 3 idle states
ACPI: \_SB_.PR06: Found 3 idle states
ACPI: \_SB_.PR07: Found 3 idle states
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
loop: module loaded
nvme nvme0: pci function 0000:02:00.0
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x0 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
ata1: DUMMY
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
nvme nvme0: 8/0/0 default/read/poll queues
nvme0n1: p1 p2 p3 p4
battery: ACPI: Battery Slot [BAT0] (battery present)
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) c8:f7:50:39:59:c9
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
sky2: driver version 1.30
usbcore: registered new interface driver ipheth
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.8.12-master2ACDI xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.8.12-master2ACDI xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usb-storage
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.4: SPD Write Disable is set
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration
i2c i2c-0: 2/4 memory slots populated (from DMI)
i2c i2c-0: Successfully instantiated SPD at 0x50
i2c i2c-0: Successfully instantiated SPD at 0x51
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
EFI Variables Facility v0.08 2004-May-17
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
modprobe (109) used greatest stack depth: 14600 bytes left
snd_hda_intel 0000:01:00.1: Disabling MSI
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x906ea, pf=0x20, revision=0xd6
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1157838733, 8765272)->(1228722987, -62118982)
registered taskstats version 1
Loading compiled-in X.509 certificates
Btrfs loaded, crc32c=crc32c-generic
PM: Magic number: 12:765:834
random: fast init done
printk: console [netcon0] enabled
netconsole: network logging started
cfg80211: Loading compiled-in X.509 certificates for regulatory database
modprobe (113) used greatest stack depth: 14408 bytes left
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
ALSA device list:
No soundcards found.
Freeing unused kernel image (initmem) memory: 1180K
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
Write protecting the kernel read-only data: 20480k
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
Freeing unused kernel image (text/rodata gap) memory: 2040K
Freeing unused kernel image (rodata/data gap) memory: 972K
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.8.12-master2ACDI
exe (125) used greatest stack depth: 14312 bytes left
exe (127) used greatest stack depth: 14192 bytes left
exe (128) used greatest stack depth: 14056 bytes left
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
udevadm (148) used greatest stack depth: 13832 bytes left
e1000e 0000:00:1f.6 eno1: renamed from eth0
systemd-udevd (155) used greatest stack depth: 13568 bytes left
systemd-udevd (154) used greatest stack depth: 13048 bytes left
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.01
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
usb 1-1: Manufacturer: GenesysLogic
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice= 4.01
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB3.0 Hub
usb 2-1: Manufacturer: GenesysLogic
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 1-10: new full-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2495.988 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa6bcc764, max_idle_ns: 440795206109 ns
clocksource: Switched to clocksource tsc
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5832, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
usb 1-1.1: new full-speed USB device number 4 using xhci_hcd
usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: USB Receiver
usb 1-1.1: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52B.0001/input/input12
hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1.1/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input13
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input14
usb 1-11: new high-speed USB device number 5 using xhci_hcd
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input15
hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1.1/input1
hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1.1/input2
usb 1-11: New USB device found, idVendor=0c45, idProduct=6717, bcdDevice=75.24
usb 1-11: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-11: Product: Integrated_Webcam_HD
usb 1-11: Manufacturer: CN0K49W1LOG00915BD4TA02
usb 1-1.2: new low-speed USB device number 6 using xhci_hcd
usb 1-1.2: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB Optical Mouse
usb 1-1.2: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:093A:2510.0004/input/input17
hid-generic 0003:093A:2510.0004: input,hidraw3: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1.2/input0
usb 1-14: new full-speed USB device number 7 using xhci_hcd
usb 1-14: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
process '/bin/fstype' started with executable stack
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: [/etc/systemd/system/snap-core18-1932.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
systemd[1]: [/etc/systemd/system/snap-spotify-42.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
systemd[1]: [/etc/systemd/system/snap-gitkraken-163.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
systemd[1]: [/etc/systemd/system/snap-slack-30.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
systemd[1]: [/etc/systemd/system/snap-slack-29.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
systemd[1]: [/etc/systemd/system/snap-gtk\x2dcommon\x2dthemes-1506.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
systemd[1]: [/etc/systemd/system/snap-core-10126.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
EXT4-fs (nvme0n1p3): re-mounted. Opts: errors=remount-ro
systemd-journald[343]: Received request to flush runtime journal from PID 1
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
wmi_bus wmi_bus-PNP0C14:05: WQBC data block query control method not found
acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
acpi PNP0C14:06: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
acpi PNP0C14:07: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:6f:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:6f:00.0: Direct firmware load for iwlwifi-9260-th-b0-jf-b0-46.ucode failed with error -2
iwlwifi 0000:6f:00.0: Direct firmware load for iwlwifi-9260-th-b0-jf-b0-45.ucode failed with error -2
iwlwifi 0000:6f:00.0: Direct firmware load for iwlwifi-9260-th-b0-jf-b0-44.ucode failed with error -2
iwlwifi 0000:6f:00.0: Direct firmware load for iwlwifi-9260-th-b0-jf-b0-43.ucode failed with error -2
iwlwifi 0000:6f:00.0: Direct firmware load for iwlwifi-9260-th-b0-jf-b0-42.ucode failed with error -2
iwlwifi 0000:6f:00.0: Direct firmware load for iwlwifi-9260-th-b0-jf-b0-41.ucode failed with error -2
iwlwifi 0000:6f:00.0: Direct firmware load for iwlwifi-9260-th-b0-jf-b0-40.ucode failed with error -2
iwlwifi 0000:6f:00.0: Direct firmware load for iwlwifi-9260-th-b0-jf-b0-39.ucode failed with error -2
iwlwifi 0000:6f:00.0: loaded firmware version 38.c0e03d94.0 9260-th-b0-jf-b0-38.ucode op_mode iwlmvm
iwlwifi 0000:6f:00.0: Direct firmware load for iwl-debug-yoyo.bin failed with error -2
checking generic (60000000 7e9000) vs hw (b4000000 1000000)
checking generic (60000000 7e9000) vs hw (60000000 10000000)
fb0: switching to inteldrmfb from simple
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
iwlwifi 0000:6f:00.0: Detected Intel(R) Wireless-AC 9260, REV=0x324
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2
i915 0000:00:02.0: [drm] Failed to load DMC firmware i915/kbl_dmc_ver1_04.bin. Disabling runtime power management.
i915 0000:00:02.0: [drm] DMC firmware homepage:
i915 0000:00:02.0: [drm] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a _new_ bug report on drm/i915, see for details.
Adding 16287740k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:16287740k SS
iwlwifi 0000:6f:00.0: base HW address: d4:3b:04:67:bf:9c
new mount options do not match the existing superblock, will be ignored
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone2: failed to read out thermal zone (-61)
iwlwifi 0000:6f:00.0 wlp111s0: renamed from wlan0
Process accounting resumed
[drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
i915 0000:00:02.0: [drm] *ERROR* LSPCON init failed on port D
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: Firmware revision 0.1 build 73 week 26 2018
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
[drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input19
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC289: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1b
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
systemd-udevd (402) used greatest stack depth: 12496 bytes left
wlp111s0: authenticate with 38:94:ed:f6:5c:c5
wlp111s0: send auth to 38:94:ed:f6:5c:c5 (try 1/3)
wlp111s0: authenticated
wlp111s0: associating with AP with corrupt probe response
wlp111s0: associate with 38:94:ed:f6:5c:c5 (try 1/3)
wlp111s0: RX AssocResp from 38:94:ed:f6:5c:c5 (capab=0x411 status=0 aid=3)
wlp111s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp111s0: link becomes ready
wlp111s0: deauthenticating from 38:94:ed:f6:5c:c5 by local choice (Reason: 3=DEAUTH_LEAVING)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
usb 1-1.1: USB disconnect, device number 4
usb 1-2: new full-speed USB device number 8 using xhci_hcd
usb 1-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB Receiver
usb 1-2: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C52B.0005/input/input26
hid-generic 0003:046D:C52B.0005: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52B.0006/input/input27
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52B.0006/input/input28
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52B.0006/input/input29
hid-generic 0003:046D:C52B.0006: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
hid-generic 0003:046D:C52B.0007: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C52B.0008/input/input31
hid-generic 0003:046D:C52B.0008: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52B.0009/input/input32
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52B.0009/input/input33
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52B.0009/input/input34
hid-generic 0003:046D:C52B.0009: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
hid-generic 0003:046D:C52B.000A: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
kworker/dying (61) used greatest stack depth: 12336 bytes left
kworker/dying (90) used greatest stack depth: 12168 bytes left