dmesg - x220-i3-ior
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0x (ptrval), using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (78 C)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf252a000
ACPI: Battery Slot [BAT0] (battery present)
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.0-121-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2529000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.0-121-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
mce: Using 7 MCE banks
RAS: Correctable Errors collector initialized.
microcode: sig=0x206a7, pf=0x10, revision=0x2f
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (827647918, 0)->(804390841, 23257077)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 517b2180bafe62ad6f81db3336688475b28504c0'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
ima: Allocated hash algorithm: sha1
evm: HMAC attrs: 0x1
Magic number: 8:407:700
rtc_cmos 00:02: setting system clock to 2020-10-15 20:41:44 UTC (1602794504)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel image memory: 2436K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1872K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 7)
mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 24
ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 24
ata3: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528200 irq 24
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 24
ata6: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 1-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
usb 2-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:80:9f:a0
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
e1000e 0000:00:19.0 enp0s25: renamed from eth0
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: HITACHI HTS543232A7A384, ES2ZB70B, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54323 B70B PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
random: fast init done
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: Biometric Coprocessor
usb 1-1.3: Manufacturer: UPEK
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
usb 1-1.4: new full-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 2093.200 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e2c18db8be, max_idle_ns: 440795251115 ns
usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Broadcom Bluetooth Device
usb 1-1.4: Manufacturer: Broadcom Corp
usb 1-1.4: SerialNumber: 402CF45662A2
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
usb 1-1.6: new high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00/0x0, board id: 1611, fw id: 774180
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATA-7: INTEL SSDMAEMC080G2, 2CV102M3, max UDMA/133
ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA INTEL SSDMAEMC08 02M3 PQ: 0 ANSI: 5
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: Enabling discard_zeroes_data
sdb: sdb1 sdb2 < sdb5 sdb6 >
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdb] Attached SCSI disk
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Integrated Camera
usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
ata5: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Huge Pages File System...
EXT4-fs (sdb6): re-mounted. Opts: discard,errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd-journald[284]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
Non-volatile memory driver v1.3
cfg80211: Loading compiled-in X.509 certificates for regulatory database
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 8DET50WW (1.20 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad X220, model 4290W1A
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
------------[ cut here ]------------
Could not determine valid watermarks for inherited state
WARNING: CPU: 2 PID: 317 at /build/linux-uI6OXA/linux-4.15.0/drivers/gpu/drm/i915/intel_display.c:14537 intel_modeset_init+0xfcf/0x1010 [i915]
Modules linked in: snd_hda_codec snd_hda_core crc32_pclmul snd_hwdep ghash_clmulni_intel cryptd snd_pcm arc4 intel_cstate snd_seq_midi intel_rapl_perf snd_seq_midi_event iwldvm snd_rawmidi mac80211 input_leds i915(+) iwlwifi joydev snd_seq serio_raw thinkpad_acpi snd_seq_device nvram drm_kms_helper cfg80211 snd_timer drm wmi mei_me snd i2c_algo_bit fb_sys_fops syscopyarea sysfillrect mei sysimgblt lpc_ich shpchp soundcore mac_hid video sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 e1000e psmouse ahci ptp pps_core sdhci_pci libahci sdhci
CPU: 2 PID: 317 Comm: systemd-udevd Not tainted 4.15.0-121-generic #123-Ubuntu
Hardware name: LENOVO 4290W1A/4290W1A, BIOS 8DET50WW (1.20 ) 07/07/2011
RIP: 0010:intel_modeset_init+0xfcf/0x1010 [i915]
RSP: 0018:ffffac5c812279b0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff90c711688000 RCX: 0000000000000006
RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff90c71e296490
RBP: ffffac5c81227a40 R08: 000000000000038a R09: 0000000000000004
R10: 0000000000000040 R11: 0000000000000001 R12: ffff90c71178f800
R13: ffff90c70fdf0000 R14: 00000000ffffffea R15: ffff90c711688358
FS: 00007f82f32ad680(0000) GS:ffff90c71e280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4d13734634 CR3: 0000000210e5e005 CR4: 00000000000606e0
Call Trace:
i915_driver_load+0xa73/0xe60 [i915]
i915_pci_probe+0x42/0x70 [i915]
local_pci_probe+0x47/0xa0
pci_device_probe+0xf1/0x1d0
driver_probe_device+0x30c/0x4a0
__driver_attach+0xcc/0xf0
? driver_probe_device+0x4a0/0x4a0
bus_for_each_dev+0x70/0xc0
driver_attach+0x1e/0x20
bus_add_driver+0x1c7/0x270
? 0xffffffffc0953000
driver_register+0x60/0xe0
? 0xffffffffc0953000
__pci_register_driver+0x5a/0x60
i915_init+0x5c/0x5f [i915]
do_one_initcall+0x52/0x19f
? __vunmap+0xb5/0xe0
? _cond_resched+0x19/0x40
? kmem_cache_alloc_trace+0x15d/0x1d0
? do_init_module+0x27/0x213
do_init_module+0x5f/0x213
load_module+0x16bd/0x1f20
? ima_post_read_file+0x96/0xa0
SYSC_finit_module+0xfc/0x120
? SYSC_finit_module+0xfc/0x120
SyS_finit_module+0xe/0x10
do_syscall_64+0x73/0x130
entry_SYSCALL_64_after_hwframe+0x41/0xa6
RIP: 0033:0x7f82f2dd8959
RSP: 002b:00007ffcdae2e118 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000555a9cb2ea10 RCX: 00007f82f2dd8959
RDX: 0000000000000000 RSI: 00007f82f2ab7105 RDI: 0000000000000015
RBP: 00007f82f2ab7105 R08: 0000000000000000 R09: 00007ffcdae2e230
R10: 0000000000000015 R11: 0000000000000246 R12: 0000000000000000
R13: 0000555a9cb13120 R14: 0000000000020000 R15: 0000555a9cb2ea10
Code: e9 46 fc ff ff 48 c7 c6 f7 1d 8e c0 48 c7 c7 4f 11 8e c0 e8 64 a7 23 fa 0f 0b e9 73 fe ff ff 48 c7 c7 40 76 8f c0 e8 51 a7 23 fa 0b e9 4b fe ff ff 48 c7 c6 04 1e 8e c0 48 c7 c7 4f 11 8e c0
---[ end trace 7c6c55675acb368a ]---
[drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
acpi device:00: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
media: Linux media interface: v0.10
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
usbcore: registered new interface driver btusb
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC0D0: inputs:
snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
Adding 15624188k swap on /dev/sdb1. Priority:-2 extents:1 across:15624188k SSFS
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1602794510.601:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=982 comm="apparmor_parser"
audit: type=1400 audit(1602794510.601:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=982 comm="apparmor_parser"
audit: type=1400 audit(1602794510.601:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=982 comm="apparmor_parser"
audit: type=1400 audit(1602794510.601:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/5145/usr/lib/snapd/snap-confine" pid=979 comm="apparmor_parser"
audit: type=1400 audit(1602794510.601:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/5145/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=979 comm="apparmor_parser"
audit: type=1400 audit(1602794510.605:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=983 comm="apparmor_parser"
audit: type=1400 audit(1602794510.605:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=984 comm="apparmor_parser"
audit: type=1400 audit(1602794510.605:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=978 comm="apparmor_parser"
audit: type=1400 audit(1602794510.605:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=978 comm="apparmor_parser"
audit: type=1400 audit(1602794510.605:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=978 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
aufs 4.15-20180219
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: waiting for beacon from 84:00:2d:5f:06:60
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2093188582 Hz
vboxdrv: Successfully loaded version 5.2.42_Ubuntu (interface 0x00290001)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
IRQ 27: no longer affine to CPU1
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 16: no longer affine to CPU3
IRQ 23: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ...
ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: docking
ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: Unable to dock!
done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
perf: interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
perf: interrupt took too long (3146 > 3136), lowering kernel.perf_event_max_sample_rate to 63500
perf: interrupt took too long (3936 > 3932), lowering kernel.perf_event_max_sample_rate to 50750
powercap intel-rapl:0: package locked by BIOS, monitoring only
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Core temperature above threshold, cpu clock throttled (total events = 53)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 53)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 53)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 53)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 53)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 53)
CPU1: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 357)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 357)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 361)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 361)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 361)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 361)
CPU1: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 359)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 359)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 363)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 363)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 363)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 363)
CPU1: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
perf: interrupt took too long (4921 > 4920), lowering kernel.perf_event_max_sample_rate to 40500
CPU1: Core temperature above threshold, cpu clock throttled (total events = 375)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 375)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 379)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 379)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 379)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 379)
CPU0: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1265)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1244)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1244)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1265)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1265)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1265)
CPU0: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
intel_pstate: Turbo disabled by BIOS or unavailable on processor
CPU1: Core temperature above threshold, cpu clock throttled (total events = 3196)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 3196)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 3369)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 3369)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 3369)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 3369)
CPU0: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Core temperature above threshold, cpu clock throttled (total events = 6386)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 6386)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 6737)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 6737)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 6737)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 6737)
CPU1: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 6493)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 6848)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 6493)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 6848)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 6848)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 6848)
CPU0: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Core temperature above threshold, cpu clock throttled (total events = 6547)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 6547)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 6902)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 6902)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 6902)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 6902)
CPU1: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.091 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 2:0:0:0: [sdb] Starting disk
sd 0:0:0:0: [sda] Starting disk
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
kauditd_printk_skb: 73 callbacks suppressed
audit: type=1400 audit(1602872093.322:85): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.slack.slack" pid=14771 comm="apparmor_parser"
audit: type=1400 audit(1602872093.330:86): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.slack" pid=14773 comm="apparmor_parser"
usb 2-1.2: new high-speed USB device number 3 using ehci-pci
usb 2-1.2: New USB device found, idVendor=14cd, idProduct=6116
usb 2-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 2-1.2: Product: USB Mass Storage Device
usb 2-1.2: Manufacturer: Generic
usb 2-1.2: SerialNumber: 116AC2101219
usb-storage 2-1.2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-1.2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] 156301486 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.2: USB disconnect, device number 3
TCP: wlp3s0: Driver has suspect GRO implementation, TCP performance may be compromised.
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
audit: type=1400 audit(1602950411.116:87): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=24193 comm="apparmor_parser"
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Initializing XFRM netlink socket
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
CPU1: Core temperature above threshold, cpu clock throttled (total events = 6549)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 6549)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 6904)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 6904)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 6904)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 6904)
CPU0: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 2:0:0:0: [sdb] Starting disk
sd 0:0:0:0: [sda] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: issuing reconnect request
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 2:0:0:0: [sdb] Starting disk
sd 0:0:0:0: [sda] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
CPU0: Core temperature above threshold, cpu clock throttled (total events = 6565)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 6565)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 6920)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 6920)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 6920)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 6920)
CPU0: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Core temperature above threshold, cpu clock throttled (total events = 6592)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 6592)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 6947)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 6947)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 6947)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 6947)
CPU1: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 2:0:0:0: [sdb] Starting disk
sd 0:0:0:0: [sda] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
audit: type=1400 audit(1603496960.167:88): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/10185/usr/lib/snapd/snap-confine" pid=26560 comm="apparmor_parser"
audit: type=1400 audit(1603496960.167:89): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/10185/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=26560 comm="apparmor_parser"
audit: type=1400 audit(1603496960.999:90): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=26562 comm="apparmor_parser"
audit: type=1400 audit(1603496962.035:91): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gimp" pid=26563 comm="apparmor_parser"
audit: type=1400 audit(1603496962.503:92): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=26564 comm="apparmor_parser"
audit: type=1400 audit(1603496962.519:93): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=26565 comm="apparmor_parser"
audit: type=1400 audit(1603496962.699:94): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=26566 comm="apparmor_parser"
audit: type=1400 audit(1603496963.351:95): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=26568 comm="apparmor_parser"
audit: type=1400 audit(1603496963.643:96): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.xournalpp" pid=26569 comm="apparmor_parser"
audit: type=1400 audit(1603496963.651:97): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=26571 comm="apparmor_parser"
kauditd_printk_skb: 12 callbacks suppressed
audit: type=1400 audit(1603496966.671:110): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/10185/usr/lib/snapd/snap-confine" pid=26758 comm="apparmor_parser"
audit: type=1400 audit(1603496966.695:111): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/10185/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=26758 comm="apparmor_parser"
audit: type=1400 audit(1603496968.347:112): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=26761 comm="apparmor_parser"
audit: type=1400 audit(1603496968.519:113): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.xournalpp" pid=26760 comm="apparmor_parser"
audit: type=1400 audit(1603496968.551:114): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=26763 comm="apparmor_parser"
audit: type=1400 audit(1603496968.571:115): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gimp" pid=26762 comm="apparmor_parser"
audit: type=1400 audit(1603496969.351:116): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=26764 comm="apparmor_parser"
audit: type=1400 audit(1603496969.691:117): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=26765 comm="apparmor_parser"
audit: type=1400 audit(1603496969.699:118): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.notes" pid=26767 comm="apparmor_parser"
audit: type=1400 audit(1603496969.703:119): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.vlc" pid=26769 comm="apparmor_parser"
CPU3: Package temperature above threshold, cpu clock throttled (total events = 6966)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 6611)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 6611)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 6966)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 6966)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 6966)
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU1: Core temperature above threshold, cpu clock throttled (total events = 6614)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 6614)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 6969)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 6969)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 6969)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 6969)
CPU0: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
netlink: 'svpn': attribute type 6 has an invalid length.
netlink: 'svpn': attribute type 4 has an invalid length.
netlink: 'svpn': attribute type 6 has an invalid length.
netlink: 'svpn': attribute type 4 has an invalid length.
netlink: 'svpn': attribute type 6 has an invalid length.
netlink: 'svpn': attribute type 4 has an invalid length.
netlink: 'svpn': attribute type 6 has an invalid length.
netlink: 'svpn': attribute type 4 has an invalid length.
netlink: 'svpn': attribute type 6 has an invalid length.
netlink: 'svpn': attribute type 4 has an invalid length.
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
validate_nla: 18 callbacks suppressed
netlink: 'svpn': attribute type 6 has an invalid length.
netlink: 'svpn': attribute type 4 has an invalid length.
netlink: 'svpn': attribute type 6 has an invalid length.
netlink: 'svpn': attribute type 4 has an invalid length.
netlink: 'svpn': attribute type 6 has an invalid length.
netlink: 'svpn': attribute type 4 has an invalid length.
netlink: 'svpn': attribute type 6 has an invalid length.
netlink: 'svpn': attribute type 4 has an invalid length.
netlink: 'svpn': attribute type 6 has an invalid length.
netlink: 'svpn': attribute type 4 has an invalid length.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
CPU0: Core temperature above threshold, cpu clock throttled (total events = 7013)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 7013)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 7378)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 7378)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 7378)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 7378)
CPU1: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1 gen() 5131 MB/s
raid6: sse2x1 xor() 4047 MB/s
raid6: sse2x2 gen() 7109 MB/s
raid6: sse2x2 xor() 4813 MB/s
raid6: sse2x4 gen() 8249 MB/s
raid6: sse2x4 xor() 4796 MB/s
raid6: using algorithm sse2x4 gen() 8249 MB/s
raid6: .... xor() 4796 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
CPU3: Package temperature above threshold, cpu clock throttled (total events = 7379)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 7379)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 7014)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 7014)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 7379)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 7379)
CPU1: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
CPU1: Core temperature above threshold, cpu clock throttled (total events = 7017)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 7017)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 7382)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 7382)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 7382)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 7382)
CPU1: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU1: Core temperature above threshold, cpu clock throttled (total events = 7019)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 7019)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 7384)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 7384)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 7384)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 7384)
CPU1: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 2:0:0:0: [sdb] Starting disk
sd 0:0:0:0: [sda] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
kauditd_printk_skb: 18 callbacks suppressed
audit: type=1400 audit(1604247433.017:138): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=6604 comm="apparmor_parser"
audit: type=1400 audit(1604247433.033:139): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=6604 comm="apparmor_parser"
audit: type=1400 audit(1604247435.449:140): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=6713 comm="apparmor_parser"
audit: type=1400 audit(1604247435.461:141): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/10185/usr/lib/snapd/snap-confine" pid=6712 comm="apparmor_parser"
audit: type=1400 audit(1604247435.461:142): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/10185/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=6712 comm="apparmor_parser"
audit: type=1400 audit(1604247435.461:143): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=6715 comm="apparmor_parser"
audit: type=1400 audit(1604247435.473:144): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gimp" pid=6714 comm="apparmor_parser"
audit: type=1400 audit(1604247435.477:145): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=6718 comm="apparmor_parser"
audit: type=1400 audit(1604247435.485:146): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.julia-mrcinv" pid=6728 comm="apparmor_parser"
audit: type=1400 audit(1604247435.493:147): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.skype" pid=6736 comm="apparmor_parser"
kauditd_printk_skb: 22 callbacks suppressed
audit: type=1400 audit(1604247438.477:170): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=6894 comm="apparmor_parser"
audit: type=1400 audit(1604247438.585:171): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=6893 comm="apparmor_parser"
audit: type=1400 audit(1604247438.853:172): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=6892 comm="apparmor_parser"
audit: type=1400 audit(1604247438.893:173): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=6891 comm="apparmor_parser"
audit: type=1400 audit(1604247439.525:174): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gimp" pid=6895 comm="apparmor_parser"
audit: type=1400 audit(1604247439.897:175): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.xournalpp" pid=6896 comm="apparmor_parser"
audit: type=1400 audit(1604247439.913:176): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=6899 comm="apparmor_parser"
audit: type=1400 audit(1604247439.913:177): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=6900 comm="apparmor_parser"
audit: type=1400 audit(1604247439.913:178): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=6898 comm="apparmor_parser"
audit: type=1400 audit(1604247439.917:179): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.julia-mrcinv" pid=6901 comm="apparmor_parser"
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
ACPI: EC: event unblocked
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
wlp3s0: deauthenticating from 84:00:2d:5f:06:60 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 28: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 23: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:00:2d:5f:06:60
wlp3s0: send auth to 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:00:2d:5f:06:60 (try 1/3)
wlp3s0: RX AssocResp from 84:00:2d:5f:06:60 (capab=0x1411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 84:00:2d:5f:06:60
kauditd_printk_skb: 16 callbacks suppressed
audit: type=1400 audit(1604418220.782:196): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.skype.skype" pid=20919 comm="apparmor_parser"
audit: type=1400 audit(1604418220.790:197): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.skype" pid=20921 comm="apparmor_parser"