dmesg - 2020-10-31
microcode: microcode updated early to revision 0xd6, date = 2020-04-23
Linux version 5.8.0-26-generic (buildd@lcy01-amd64-025) (gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, GNU ld (GNU Binutils for Ubuntu) 2.35.1) #27-Ubuntu SMP Wed Oct 21 22:29:16 UTC 2020 (Ubuntu 5.8.0-26.27-generic 5.8.14)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000008c5ecfff] usable
BIOS-e820: [mem 0x000000008c5ed000-0x000000008dc73fff] reserved
BIOS-e820: [mem 0x000000008dc74000-0x000000008dd3cfff] usable
BIOS-e820: [mem 0x000000008dd3d000-0x000000008de6efff] ACPI NVS
BIOS-e820: [mem 0x000000008de6f000-0x000000008ec0efff] reserved
BIOS-e820: [mem 0x000000008ec0f000-0x000000008ec0ffff] usable
BIOS-e820: [mem 0x000000008ec10000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000106bffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x80dce018-0x80deda57] usable ==> usable
e820: update [mem 0x80dce018-0x80deda57] usable ==> usable
e820: update [mem 0x80dbd018-0x80dcde57] usable ==> usable
e820: update [mem 0x80dbd018-0x80dcde57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000080dbd017] usable
reserve setup_data: [mem 0x0000000080dbd018-0x0000000080dcde57] usable
reserve setup_data: [mem 0x0000000080dcde58-0x0000000080dce017] usable
reserve setup_data: [mem 0x0000000080dce018-0x0000000080deda57] usable
reserve setup_data: [mem 0x0000000080deda58-0x000000008c5ecfff] usable
reserve setup_data: [mem 0x000000008c5ed000-0x000000008dc73fff] reserved
reserve setup_data: [mem 0x000000008dc74000-0x000000008dd3cfff] usable
reserve setup_data: [mem 0x000000008dd3d000-0x000000008de6efff] ACPI NVS
reserve setup_data: [mem 0x000000008de6f000-0x000000008ec0efff] reserved
reserve setup_data: [mem 0x000000008ec0f000-0x000000008ec0ffff] usable
reserve setup_data: [mem 0x000000008ec10000-0x000000008fffffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000106bffffff] usable
efi: EFI v2.70 by American Megatrends
efi: ACPI 2.0=0x8dd50000 ACPI=0x8dd50000 TPMFinalLog=0x8ddb9000 SMBIOS=0x8e9bc000 SMBIOS 3.0=0x8e9bb000 MEMATTR=0x89085418 ESRT=0x89160f98 RNG=0x8e9e6b18 TPMEventLog=0x82aee018
efi: seeding entropy pool
random: fast init done
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: Compulab Ltd. Airtop3/SBC-ATCFL, BIOS ATOP3.PRD.0.29.2 07/08/2019
tsc: Detected 3700.000 MHz processor
tsc: Detected 3699.850 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x106c000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 2000000000 mask 6000000000 uncachable
4 base 4000000000 mask 4000000000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x8ec10 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x0000000089160f98 to 0x0000000089160fd0.
e820: update [mem 0x89160000-0x89160fff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x3cec4000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008DD50000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008DD500D0 00011C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000008DD8BEF0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000008DD50280 03BC6A (v02 ALASKA A M I 01072009 INTL 20160527)
ACPI: FACS 0x000000008DE6EF80 000040
ACPI: APIC 0x000000008DD8C008 00012C (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000008DD8C138 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000008DD8C180 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000008DD8C220 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008DD8C260 001B5F (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
ACPI: WDAT 0x000000008DD8DDC0 000194 (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: SSDT 0x000000008DD8DF58 0031C6 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x000000008DD91120 00241B (v02 PegSsd PegSsdt 00001000 INTL 20160527)
ACPI: HPET 0x000000008DD93540 000038 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000008DD93578 00279C (v02 ALASKA CflS82Rv 00001000 INTL 20160527)
ACPI: SSDT 0x000000008DD95D18 000FAE (v02 ALASKA Ther_Rvp 00001000 INTL 20160527)
ACPI: SSDT 0x000000008DD96CC8 002FCE (v02 INTEL xh_cfsd4 00000000 INTL 20160527)
ACPI: UEFI 0x000000008DD99C98 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: LPIT 0x000000008DD99CE0 000094 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000008DD99D78 0027DE (v02 ALASKA PtidDevc 00001000 INTL 20160527)
ACPI: SSDT 0x000000008DD9C558 0014E2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527)
ACPI: DBGP 0x000000008DD9DA40 000034 (v01 ALASKA A M I 00000002 01000013)
ACPI: DBG2 0x000000008DD9DA78 000054 (v00 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000008DD9DAD0 001B67 (v02 ALASKA UsbCTabl 00001000 INTL 20160527)
ACPI: DMAR 0x000000008DD9F638 000090 (v01 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x000000008DD9F6C8 000144 (v02 Intel ADebTabl 00001000 INTL 20160527)
ACPI: NHLT 0x000000008DD9F810 001771 (v00 INTEL EDK2 00000002 01000013)
ACPI: BGRT 0x000000008DDA0F88 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: TPM2 0x000000008DDA0FC0 000034 (v04 ALASKA A M I 00000001 AMI 00000000)
ACPI: ASF! 0x000000008DDA0FF8 000074 (v32 ALASKA A M I 00000002 01000013)
ACPI: WSMT 0x000000008DDA1070 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: EINJ 0x000000008DDA1098 000130 (v01 AMI AMI.EINJ 00000000 AMI. 00000000)
ACPI: ERST 0x000000008DDA11C8 000230 (v01 AMIER AMI.ERST 00000000 AMI. 00000000)
ACPI: BERT 0x000000008DDA13F8 000030 (v01 AMI AMI.BERT 00000000 AMI. 00000000)
ACPI: HEST 0x000000008DDA1428 0000A8 (v01 AMI AMI.HEST 00000000 AMI. 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000106bffffff]
NODE_DATA(0) allocated [mem 0x106bfd6000-0x106bffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000106bffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000008c5ecfff]
node 0: [mem 0x000000008dc74000-0x000000008dd3cfff]
node 0: [mem 0x000000008ec0f000-0x000000008ec0ffff]
node 0: [mem 0x0000000100000000-0x000000106bffffff]
Zeroed struct page in unavailable ranges: 31147 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000106bffffff]
On node 0 totalpages: 16746069
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8923 pages used for memmap
DMA32 zone: 571063 pages, LIFO batch:63
Normal zone: 252672 pages used for memmap
Normal zone: 16171008 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x88750000-0x887c5fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x80dbd000-0x80dbdfff]
PM: hibernation: Registered nosave memory: [mem 0x80dcd000-0x80dcdfff]
PM: hibernation: Registered nosave memory: [mem 0x80dce000-0x80dcefff]
PM: hibernation: Registered nosave memory: [mem 0x80ded000-0x80dedfff]
PM: hibernation: Registered nosave memory: [mem 0x88750000-0x887c5fff]
PM: hibernation: Registered nosave memory: [mem 0x89160000-0x89160fff]
PM: hibernation: Registered nosave memory: [mem 0x8c5ed000-0x8dc73fff]
PM: hibernation: Registered nosave memory: [mem 0x8dd3d000-0x8de6efff]
PM: hibernation: Registered nosave memory: [mem 0x8de6f000-0x8ec0efff]
PM: hibernation: Registered nosave memory: [mem 0x8ec10000-0x8fffffff]
PM: hibernation: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 16484388
Policy zone: Normal
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 65601884K/66984276K available (14339K kernel code, 2535K rwdata, 8792K rodata, 2636K init, 4924K bss, 1382392K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2b/0x240 with crng_init=1
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 48582 entries in 190 pages
ftrace: allocated 190 pages with 6 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 2184, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200528
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000008e2ed000 end: 0x0000008e536fff
DMAR: RMRR base: 0x0000008dbf4000 end: 0x0000008dc73fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=14799400)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Enhanced IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
TAA: Mitigation: TSX disabled
SRBDS: Mitigation: TSX disabled
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Xeon(R) E-2288G CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xd)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (118395.20 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x8dd3d000-0x8de6efff] (1253376 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 12:33:54, date: 2020-10-31
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
NET: Registered protocol family 16
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1604147634.052:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 11 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DFCA3931B00 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DFCA392D000 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DFCA4BAF000 0006EC (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DFCA3821C00 000149 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DFCA4BAD800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DFCA4BAA000 0005FC (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DFCA392B000 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DFCA3819000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DFCA3928C00 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 9 GPEs in block 00 to 7F
ACPI: Power Resource [PXP] (off)
ACPI: Power Resource [PXP] (off)
ACPI: Power Resource [PXP] (off)
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [PAUD] (on)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [PXTC] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: Power Resource [PIN] (off)
ACPI: Power Resource [SPR0] (off)
ACPI: Power Resource [SPR1] (off)
ACPI: Power Resource [SPR2] (off)
ACPI: Power Resource [SPR3] (off)
ACPI: Power Resource [SPR5] (off)
ACPI: Power Resource [ZPDR] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3e31] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xa4543000-0xa4543fff 64bit]
pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0xa4542000-0xa4542fff 64bit]
pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xa4520000-0xa452ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0xa4536000-0xa4537fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0xa4541000-0xa4541fff 64bit]
pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000
pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:15.1: [8086:a369] type 00 class 0x0c8000
pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xa453e000-0xa453efff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:16.3: [8086:a363] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x5060-0x5067]
pci 0000:00:16.3: reg 0x14: [mem 0xa453d000-0xa453dfff]
pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xa4534000-0xa4535fff]
pci 0000:00:17.0: reg 0x14: [mem 0xa453c000-0xa453c0ff]
pci 0000:00:17.0: reg 0x18: [io 0x5050-0x5057]
pci 0000:00:17.0: reg 0x1c: [io 0x5040-0x5043]
pci 0000:00:17.0: reg 0x20: [io 0x5020-0x503f]
pci 0000:00:17.0: reg 0x24: [mem 0xa453b000-0xa453b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
pci 0000:00:1c.5: [8086:a33d] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PTM enabled (root), 4ns granularity
pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
pci 0000:00:1e.0: [8086:a328] type 00 class 0x078000
pci 0000:00:1e.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:1e.1: [8086:a329] type 00 class 0x078000
pci 0000:00:1e.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:1f.0: [8086:a309] type 00 class 0x060100
pci 0000:00:1f.3: [8086:a348] type 00 class 0x040380
pci 0000:00:1f.3: reg 0x10: [mem 0xa4530000-0xa4533fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xa4100000-0xa41fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xa4538000-0xa45380ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:00:1f.6: [8086:15bb] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xa4500000-0xa451ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [10de:1eb1] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
pci 0000:01:00.0: reg 0x30: [mem 0xa4000000-0xa407ffff pref]
pci 0000:01:00.0: BAR 1: assigned to efifb
pci 0000:01:00.0: PME# supported from D0 D3hot
pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
pci 0000:01:00.1: [10de:10f8] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xa4080000-0xa4083fff]
pci 0000:01:00.2: [10de:1ad8] type 00 class 0x0c0330
pci 0000:01:00.2: reg 0x10: [mem 0xa2000000-0xa203ffff 64bit pref]
pci 0000:01:00.2: reg 0x1c: [mem 0xa2040000-0xa204ffff 64bit pref]
pci 0000:01:00.2: PME# supported from D0 D3hot
pci 0000:01:00.3: [10de:1ad9] type 00 class 0x0c8000
pci 0000:01:00.3: reg 0x10: [mem 0xa4084000-0xa4084fff]
pci 0000:01:00.3: PME# supported from D0 D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xa3000000-0xa40fffff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0xa20fffff 64bit pref]
pci 0000:02:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xa4400000-0xa4407fff 64bit]
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D0
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xa4400000-0xa44fffff]
pci 0000:03:00.0: [8086:157b] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xa4300000-0xa431ffff]
pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
pci 0000:03:00.0: reg 0x1c: [mem 0xa4320000-0xa4323fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.5: bridge window [mem 0xa4300000-0xa43fffff]
pci 0000:04:00.0: [144d:a808] type 00 class 0x010802
pci 0000:04:00.0: reg 0x10: [mem 0xa4200000-0xa4203fff 64bit]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [mem 0xa4200000-0xa42fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x80dbd018-0x83ffffff]
e820: reserve RAM buffer [mem 0x80dce018-0x83ffffff]
e820: reserve RAM buffer [mem 0x88750000-0x8bffffff]
e820: reserve RAM buffer [mem 0x89160000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8c5ed000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8dd3d000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8ec10000-0x8fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x1800-0x18fe] could not be reserved
system 00:04: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:04: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:04: [mem 0xfd6f0000-0xfdffffff] could not be reserved
system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:04: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x2000-0x20fe] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:15.0: BAR 0: assigned [mem 0xa2100000-0xa2100fff 64bit]
pci 0000:00:15.1: BAR 0: assigned [mem 0xa2101000-0xa2101fff 64bit]
pci 0000:00:1e.0: BAR 0: assigned [mem 0xa2102000-0xa2102fff 64bit]
pci 0000:00:1e.1: BAR 0: assigned [mem 0xa2103000-0xa2103fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xa3000000-0xa40fffff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0xa20fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xa4400000-0xa44fffff]
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.5: bridge window [mem 0xa4300000-0xa43fffff]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [mem 0xa4200000-0xa42fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 11 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 12 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 13 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa40fffff]
pci_bus 0000:01: resource 2 [mem 0x90000000-0xa20fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xa4400000-0xa44fffff]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xa4300000-0xa43fffff]
pci_bus 0000:04: resource 1 [mem 0xa4200000-0xa42fffff]
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
pci 0000:01:00.2: D0 power state depends on 0000:01:00.0
pci 0000:01:00.3: D0 power state depends on 0000:01:00.0
pci 0000:02:00.0: PME# does not work under D0, disabling it
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Initramfs unpacking failed: Decoding failed
Freeing initrd memory: 50408K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x84750000-0x88750000] (64MB)
platform rtc_cmos: registered platform RTC device (no PNP device found)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 121
pcieport 0000:00:01.0: AER: enabled with IRQ 121
pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
pcieport 0000:00:1c.0: AER: enabled with IRQ 122
pcieport 0000:00:1c.0: DPC: enabled with IRQ 122
pcieport 0000:00:1c.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1c.5: PME: Signaling with IRQ 123
pcieport 0000:00:1c.5: AER: enabled with IRQ 123
pcieport 0000:00:1c.5: DPC: enabled with IRQ 123
pcieport 0000:00:1c.5: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1d.0: PME: Signaling with IRQ 124
pcieport 0000:00:1d.0: AER: enabled with IRQ 124
pcieport 0000:00:1d.0: DPC: enabled with IRQ 124
pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0x90000000, using 8640k, total 8640k
efifb: mode is 1920x1080x32, linelength=8192, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.5.1 model 0x9E
intel_idle: Local APIC timer is reliable in all C-states
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Invalid passive threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
serial 0000:00:16.3: enabling device (0001 -> 0003)
0000:00:16.3: ttyS4 at I/O 0x5060 (irq = 19, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 16)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: registered as rtc0
rtc_cmos rtc_cmos: setting system clock to 2020-10-31T12:33:55 UTC (1604147635)
rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x906ed, pf=0x2, revision=0xd6
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (788365147, 8621508)->(803561066, -6574411)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: df57c770f6852d92fa3c4f2b0da7fcf1ad831014'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
pstore: Using crash dump compression: deflate
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 8:656:583
pci_bus 0000:04: hash matches
RAS: Correctable Errors collector initialized.
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2636K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 1448K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.8.0-26-generic
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
nvidia-gpu 0000:01:00.3: enabling device (0000 -> 0002)
dca service started, version 1.12.1
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
ahci 0000:00:17.0: version 3.0
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.8.0-26-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
nvme nvme0: pci function 0000:04:00.0
hub 1-0:1.0: USB hub found
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
hub 1-0:1.0: 16 ports detected
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igb 0000:03:00.0: enabling device (0000 -> 0002)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
idma64 idma64.0: Found Intel integrated DMA 64-bit
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.8.0-26-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
i2c i2c-1: 2/4 memory slots populated (from DMI)
i2c i2c-1: Successfully instantiated SPD at 0x50
usb: port power management may be unreliable
i2c i2c-1: Successfully instantiated SPD at 0x52
xhci_hcd 0000:01:00.2: xHCI Host Controller
xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 3
xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.8.0-26-generic xhci-hcd
usb usb3: SerialNumber: 0000:01:00.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:01:00.2: xHCI Host Controller
xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 4
xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.8.0-26-generic xhci-hcd
usb usb4: SerialNumber: 0000:01:00.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 5
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 8 seconds
nvme nvme0: 16/0/0 default/read/poll queues
nvme0n1: p1 p2
pps pps0: new PPS source ptp0
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:01:c0:24:e1:df
igb 0000:03:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:03:00.0 enp3s0: renamed from eth0
xhci_hcd 0000:02:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.8.0-26-generic xhci-hcd
usb usb5: SerialNumber: 0000:02:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.8.0-26-generic xhci-hcd
usb usb6: SerialNumber: 0000:02:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
idma64 idma64.1: Found Intel integrated DMA 64-bit
intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
idma64 idma64.2: Found Intel integrated DMA 64-bit
intel-lpss 0000:00:1e.1: enabling device (0000 -> 0002)
idma64 idma64.3: Found Intel integrated DMA 64-bit
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 00:01:c0:25:40:bc
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 eno1: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xa453b000 port 0xa453b100 irq 127
ata2: SATA max UDMA/133 abar m2048@0xa453b000 port 0xa453b180 irq 127
ata3: SATA max UDMA/133 abar m2048@0xa453b000 port 0xa453b200 irq 127
ata4: SATA max UDMA/133 abar m2048@0xa453b000 port 0xa453b280 irq 127
usb 1-1: new low-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=04f2, idProduct=0939, bcdDevice= 1.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Optical Mouse
usb 1-1: Manufacturer: PixArt
ata1: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
usb 1-2: new low-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3695.989 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d11e346a, max_idle_ns: 881590970436 ns
clocksource: Switched to clocksource tsc
usb 1-2: New USB device found, idVendor=04f2, idProduct=0833, bcdDevice= 2.30
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB Keyboard
usb 1-2: Manufacturer: CHICONY
usb 1-11: new high-speed USB device number 4 using xhci_hcd
usb 1-11: New USB device found, idVendor=0424, idProduct=2640, bcdDevice= 9.02
usb 1-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-11:1.0: USB hub found
hub 1-11:1.0: 3 ports detected
usb 1-14: new high-speed USB device number 5 using xhci_hcd
usb 1-14: New USB device found, idVendor=0403, idProduct=6014, bcdDevice= 9.00
usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-14: Product: Single RS232-HS
usb 1-14: Manufacturer: FTDI
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:04F2:0939.0001/input/input3
hid-generic 0003:04F2:0939.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:04F2:0833.0002/input/input4
hid-generic 0003:04F2:0833.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-2/input0
input: CHICONY USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04F2:0833.0003/input/input5
usb 1-11.1: new high-speed USB device number 6 using xhci_hcd
input: CHICONY USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04F2:0833.0003/input/input6
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04F2:0833.0003/input/input7
hid-generic 0003:04F2:0833.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-2/input1
usb 1-11.1: New USB device found, idVendor=0424, idProduct=4041, bcdDevice= 2.09
usb 1-11.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-11.1: Product: Ultra Fast Media Reader
usb 1-11.1: Manufacturer: Generic
usb 1-11.1: SerialNumber: 000008264001
usb-storage 1-11.1:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-11.1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
fbcon: Taking over console
Console: switching to colour frame buffer device 240x67
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 246.6-1ubuntu1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.service:12: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: /lib/systemd/system/plymouth-start.service:17: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting Rule-based Manager for Device Events and Files...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting Mount unit for core18, revision 1885...
systemd[1]: Mounting Mount unit for core18, revision 1932...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 60...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506...
systemd[1]: Mounting Mount unit for snap-store, revision 481...
systemd[1]: Mounting Mount unit for snapd, revision 9721...
systemd[1]: Started Journal Service.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED)
intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002)
pstore: ignoring unexpected backend 'efi'
dw-apb-uart.2: ttyS5 at MMIO 0xa2102000 (irq = 20, base_baud = 7500000) is a 16550A
ee1004 1-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
ee1004 1-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
usbcore: registered new interface driver usbserial_generic
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
usbcore: registered new interface driver ftdi_sio
ftdi_sio 1-14:1.0: FTDI USB Serial Device converter detected
usb 1-14: Detected FT232H
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
dw-apb-uart.3: ttyS6 at MMIO 0xa2103000 (irq = 21, base_baud = 7500000) is a 16550A
usb 1-14: FTDI USB Serial Device converter now attached to ttyUSB0
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
nvidia-nvlink: Nvlink Core is being initialized, major device number 511
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
audit: type=1400 audit(1604147638.191:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=620 comm="apparmor_parser"
audit: type=1400 audit(1604147638.191:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=619 comm="apparmor_parser"
audit: type=1400 audit(1604147638.191:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=616 comm="apparmor_parser"
audit: type=1400 audit(1604147638.191:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=611 comm="apparmor_parser"
audit: type=1400 audit(1604147638.191:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=611 comm="apparmor_parser"
audit: type=1400 audit(1604147638.191:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=622 comm="apparmor_parser"
audit: type=1400 audit(1604147638.195:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=617 comm="apparmor_parser"
audit: type=1400 audit(1604147638.195:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=621 comm="apparmor_parser"
audit: type=1400 audit(1604147638.195:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=621 comm="apparmor_parser"
sof-audio-pci 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
sof-audio-pci 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
sof-audio-pci 0000:00:1f.3: enabling device (0000 -> 0002)
sof-audio-pci 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040380
sof-audio-pci 0000:00:1f.3: init of i915 and HDMI codec failed
sof-audio-pci 0000:00:1f.3: use msi interrupt mode
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input9
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input10
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input11
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input12
input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input13
input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input14
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 455.28 Wed Sep 30 01:05:16 UTC 2020
scsi 4:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 2.09 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg0 type 0
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 455.28 Wed Sep 30 00:58:12 UTC 2020
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain dram
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
sof-audio-pci 0000:00:1f.3: hda codecs found, mask 3
sof-audio-pci 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
sof-audio-pci 0000:00:1f.3: DMICs detected in NHLT tables: 4
nvidia-uvm: Loaded the UVM driver, major device number 509.
sd 4:0:0:0: [sda] Attached SCSI removable disk
sof-audio-pci 0000:00:1f.3: Firmware info: version 1:4:2-66a5a
sof-audio-pci 0000:00:1f.3: Firmware: ABI 3:11:0 Kernel ABI 3:16:0
skl_hda_dsp_generic skl_hda_dsp_generic: Unsupported HDAudio/iDisp configuration found
skl_hda_dsp_generic: probe of skl_hda_dsp_generic failed with error -22
kauditd_printk_skb: 38 callbacks suppressed
audit: type=1400 audit(1604147640.363:49): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=859 comm="cups-browsed" capability=23 capname="sys_nice"
e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
audit: type=1400 audit(1604147642.739:50): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/proc/858/attr/apparmor/current" pid=858 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
rfkill: input handler disabled
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
process 'pts/gmpbench-1.1.0/gmp-5.0.3/dummy-105452' started with executable stack
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
sched: RT throttling activated
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.0: AER: device [8086:a338] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: AER: [ 0] RxErr (First)