dmesg - sal_03
microcode: microcode updated early to revision 0xdc, date = 2020-04-27
Linux version 5.4.0-47-generic (buildd@lcy01-amd64-014) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #51-Ubuntu SMP Fri Sep 4 19:50:52 UTC 2020 (Ubuntu 5.4.0-47.51-generic 5.4.55)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b856cfff] usable
BIOS-e820: [mem 0x00000000b856d000-0x00000000b85a4fff] ACPI data
BIOS-e820: [mem 0x00000000b85a5000-0x00000000b8954fff] usable
BIOS-e820: [mem 0x00000000b8955000-0x00000000b8955fff] ACPI NVS
BIOS-e820: [mem 0x00000000b8956000-0x00000000b8956fff] reserved
BIOS-e820: [mem 0x00000000b8957000-0x00000000c55f5fff] usable
BIOS-e820: [mem 0x00000000c55f6000-0x00000000c6e4cfff] reserved
BIOS-e820: [mem 0x00000000c6e4d000-0x00000000c6e60fff] ACPI data
BIOS-e820: [mem 0x00000000c6e61000-0x00000000c6f5dfff] usable
BIOS-e820: [mem 0x00000000c6f5e000-0x00000000c7285fff] ACPI NVS
BIOS-e820: [mem 0x00000000c7286000-0x00000000c7ba1fff] reserved
BIOS-e820: [mem 0x00000000c7ba2000-0x00000000c7bfffff] usable
BIOS-e820: [mem 0x00000000c7c00000-0x00000000c7ffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000236ffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xb80f1018-0xb810e057] usable ==> usable
e820: update [mem 0xb80f1018-0xb810e057] usable ==> usable
e820: update [mem 0xb80d3018-0xb80f0a57] usable ==> usable
e820: update [mem 0xb80d3018-0xb80f0a57] usable ==> usable
e820: update [mem 0xb80c2018-0xb80d2e57] usable ==> usable
e820: update [mem 0xb80c2018-0xb80d2e57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000b80c2017] usable
reserve setup_data: [mem 0x00000000b80c2018-0x00000000b80d2e57] usable
reserve setup_data: [mem 0x00000000b80d2e58-0x00000000b80d3017] usable
reserve setup_data: [mem 0x00000000b80d3018-0x00000000b80f0a57] usable
reserve setup_data: [mem 0x00000000b80f0a58-0x00000000b80f1017] usable
reserve setup_data: [mem 0x00000000b80f1018-0x00000000b810e057] usable
reserve setup_data: [mem 0x00000000b810e058-0x00000000b856cfff] usable
reserve setup_data: [mem 0x00000000b856d000-0x00000000b85a4fff] ACPI data
reserve setup_data: [mem 0x00000000b85a5000-0x00000000b8954fff] usable
reserve setup_data: [mem 0x00000000b8955000-0x00000000b8955fff] ACPI NVS
reserve setup_data: [mem 0x00000000b8956000-0x00000000b8956fff] reserved
reserve setup_data: [mem 0x00000000b8957000-0x00000000c55f5fff] usable
reserve setup_data: [mem 0x00000000c55f6000-0x00000000c6e4cfff] reserved
reserve setup_data: [mem 0x00000000c6e4d000-0x00000000c6e60fff] ACPI data
reserve setup_data: [mem 0x00000000c6e61000-0x00000000c6f5dfff] usable
reserve setup_data: [mem 0x00000000c6f5e000-0x00000000c7285fff] ACPI NVS
reserve setup_data: [mem 0x00000000c7286000-0x00000000c7ba1fff] reserved
reserve setup_data: [mem 0x00000000c7ba2000-0x00000000c7bfffff] usable
reserve setup_data: [mem 0x00000000c7c00000-0x00000000c7ffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x0000000236ffffff] usable
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0xb856d000 ACPI=0xb856d000 SMBIOS=0xc7a8d000 SMBIOS 3.0=0xc7a8c000 MPS=0xfc9e0 ESRT=0xc32a5c18
secureboot: Secure boot disabled
SMBIOS 3.0.0 present.
DMI: System manufacturer System Product Name/STRIX B250F GAMING, BIOS 1207 09/04/2018
tsc: Detected 3200.000 MHz processor
tsc: Detected 3199.980 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x237000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask 7FE0000000 uncachable
1 base 00D0000000 mask 7FF0000000 uncachable
2 base 00C8000000 mask 7FF8000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xc7c00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcc40-0x000fcc4f]
esrt: Reserving ESRT space from 0x00000000c32a5c18 to 0x00000000c32a5c50.
e820: update [mem 0xc32a5000-0xc32a5fff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x3ad62000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000B856D000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000B856D0B8 0000EC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000B8598018 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000B856D240 02ADD3 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x00000000C7285F00 000040
ACPI: APIC 0x00000000B8598130 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000B85981B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000B8598200 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WSMT 0x00000000B85A4680 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000B85982F8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x00000000B8598338 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: SSDT 0x00000000B85986E0 003063 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x00000000B859B748 0025A5 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x00000000B859DCF0 000038 (v01 INTEL SKL 00000001 MSFT 0000005F)
ACPI: SSDT 0x00000000B859DD28 000024 (v02 INTEL OEM_RTD3 00001000 INTL 20160422)
ACPI: SSDT 0x00000000B859DD50 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x00000000B859EB38 000B1B (v02 INTEL xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x00000000B859F658 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x00000000B859F6A0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x00000000B85A0580 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000B85A0618 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
ACPI: SSDT 0x00000000B85A0760 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x00000000B85A0A00 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x00000000B85A3A08 00050D (v02 INTEL TbtTypeC 00000000 INTL 20160422)
ACPI: DBGP 0x00000000B85A3F18 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x00000000B85A3F50 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: BGRT 0x00000000B85A3FA8 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: UEFI 0x00000000B85A3FE0 00063A (v01 INTEL RstSataE 00000000 ?? 00000000)
ACPI: UEFI 0x00000000B85A4620 00005C (v01 INTEL RstSataV 00000000 ?? 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000236ffffff]
NODE_DATA(0) allocated [mem 0x236fd3000-0x236ffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000236ffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000b856cfff]
node 0: [mem 0x00000000b85a5000-0x00000000b8954fff]
node 0: [mem 0x00000000b8957000-0x00000000c55f5fff]
node 0: [mem 0x00000000c6e61000-0x00000000c6f5dfff]
node 0: [mem 0x00000000c7ba2000-0x00000000c7bfffff]
node 0: [mem 0x0000000100000000-0x0000000236ffffff]
Zeroed struct page in unavailable ranges: 14668 pages
Initmem setup node 0 [mem 0x0000000000001000-0x0000000236ffffff]
On node 0 totalpages: 2082484
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12573 pages used for memmap
DMA32 zone: 804631 pages, LIFO batch:63
Normal zone: 19904 pages used for memmap
Normal zone: 1273856 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0xc23fb000-0xc2440fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0xb80c2000-0xb80c2fff]
PM: Registered nosave memory: [mem 0xb80d2000-0xb80d2fff]
PM: Registered nosave memory: [mem 0xb80d3000-0xb80d3fff]
PM: Registered nosave memory: [mem 0xb80f0000-0xb80f0fff]
PM: Registered nosave memory: [mem 0xb80f1000-0xb80f1fff]
PM: Registered nosave memory: [mem 0xb810e000-0xb810efff]
PM: Registered nosave memory: [mem 0xb856d000-0xb85a4fff]
PM: Registered nosave memory: [mem 0xb8955000-0xb8955fff]
PM: Registered nosave memory: [mem 0xb8956000-0xb8956fff]
PM: Registered nosave memory: [mem 0xc23fb000-0xc2440fff]
PM: Registered nosave memory: [mem 0xc32a5000-0xc32a5fff]
PM: Registered nosave memory: [mem 0xc55f6000-0xc6e4cfff]
PM: Registered nosave memory: [mem 0xc6e4d000-0xc6e60fff]
PM: Registered nosave memory: [mem 0xc6f5e000-0xc7285fff]
PM: Registered nosave memory: [mem 0xc7286000-0xc7ba1fff]
PM: Registered nosave memory: [mem 0xc7c00000-0xc7ffffff]
PM: Registered nosave memory: [mem 0xc8000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xc8000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 2049917
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7790352K/8329936K available (14339K kernel code, 2398K rwdata, 4956K rodata, 2716K init, 4988K bss, 539584K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44505 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e2036ff8d5, max_idle_ns: 440795275316 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.96 BogoMIPS (lpj=12799920)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
TAA: Mitigation: Clear CPU buffers
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (25599.84 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xb8955000-0xb8955fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xc6f5e000-0xc7285fff] (3309568 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 07:10:04, date: 2020-09-12
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1599894604.040:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 12 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF911BADB54800 0006D5 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF911BACC1B800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF911BADB54000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF911BACC14800 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc8000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7f30000-0xf7f3ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7f4d000-0xf7f4dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:2822] type 00 class 0x010400
pci 0000:00:17.0: reg 0x10: [mem 0xf7f48000-0xf7f49fff]
pci 0000:00:17.0: reg 0x14: [mem 0xf7f4c000-0xf7f4c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xf7f4b000-0xf7f4b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a294] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.2: [8086:a29a] type 01 class 0x060400
pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a2c8] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xf7f44000-0xf7f47fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xf7f40000-0xf7f43fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xf7f20000-0xf7f2ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xf7f4a000-0xf7f4a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xf7f00000-0xf7f1ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [1002:67df] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xf7e00000-0xf7e3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref]
pci 0000:01:00.0: BAR 0: assigned to efifb
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
acpiphp: Slot [1-1] registered
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xf7d00000-0xf7d07fff 64bit]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8 GT/s x1 link at 0000:00:1d.2 (capable of 15.752 Gb/s with 8 GT/s x2 link)
pci 0000:00:1d.2: PCI bridge to [bus 04]
pci 0000:00:1d.2: bridge window [mem 0xf7d00000-0xf7dfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xb80c2018-0xbbffffff]
e820: reserve RAM buffer [mem 0xb80d3018-0xbbffffff]
e820: reserve RAM buffer [mem 0xb80f1018-0xbbffffff]
e820: reserve RAM buffer [mem 0xb856d000-0xbbffffff]
e820: reserve RAM buffer [mem 0xb8955000-0xbbffffff]
e820: reserve RAM buffer [mem 0xc23fb000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc32a5000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc55f6000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc6f5e000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc7c00000-0xc7ffffff]
e820: reserve RAM buffer [mem 0x237000000-0x237ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xf7fe0000-0xf7ffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc8000000-0xc81fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc8200000-0xc83fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xc8000000-0xc81fffff]
pci 0000:00:1c.0: bridge window [mem 0xc8200000-0xc83fffff 64bit pref]
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci 0000:00:1d.2: PCI bridge to [bus 04]
pci 0000:00:1d.2: bridge window [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc8000000-0xf7ffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xc8000000-0xc81fffff]
pci_bus 0000:02: resource 2 [mem 0xc8200000-0xc83fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Initramfs unpacking failed: Decoding failed
fbcon: Taking over console
Freeing initrd memory: 84592K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xb40c2000-0xb80c2000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:1d.2: AER: enabled with IRQ 123
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-47-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-47-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-47-generic xhci-hcd
usb usb3: SerialNumber: 0000:04:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:04:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-47-generic xhci-hcd
usb usb4: SerialNumber: 0000:04:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: registered as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:07 [mem 0xfdb00000-0xfdffffff]
caller pmc_core_probe+0x7f/0x17f mapping multiple BARs
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x506e3, pf=0x2, revision=0xdc
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (525315444, 414144)->(557057491, -31327903)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 52d16be8a47f13ed569e4734dd7da053d9d3759d'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 4:277:167
acpi device:30: hash matches
acpi PNP0000:00: hash matches
rtc_cmos 00:04: setting system clock to 2020-09-12T07:10:04 UTC (1599894604)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2716K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1188K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:17.0: flags: 64bit ncq led clo only pio slum part ems deso sadm sds apst
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
AMD-Vi: AMD IOMMUv2 functionality not available on this system
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7f4b000 port 0xf7f4b100 irq 130
ata2: SATA max UDMA/133 abar m2048@0xf7f4b000 port 0xf7f4b180 irq 130
ata3: SATA max UDMA/133 abar m2048@0xf7f4b000 port 0xf7f4b200 irq 130
ata4: SATA max UDMA/133 abar m2048@0xf7f4b000 port 0xf7f4b280 irq 130
ata5: SATA max UDMA/133 abar m2048@0xf7f4b000 port 0xf7f4b300 irq 130
ata6: SATA max UDMA/133 abar m2048@0xf7f4b000 port 0xf7f4b380 irq 130
[drm] amdgpu kernel modesetting enabled.
CRAT table not found
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xf7e00000 -> 0xf7e3ffff
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb0: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
amdgpu 0000:01:00.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1462:0x341A 0xEF).
[drm] register mmio base: 0xF7E00000
[drm] register mmio size: 262144
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
amdgpu 0000:01:00.0: No more image in the PCI ROM
ATOM BIOS: 113-V34121-X3
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
amdgpu 0000:01:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:01:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 4047014 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
[drm] Chained IB support enabled!
amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
[drm] Found UVD firmware Version: 1.130 Family ID: 16
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
usb 1-8: new low-speed USB device number 2 using xhci_hcd
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 588000
[drm] DM_PPLIB: 971000
[drm] DM_PPLIB: 1061000
[drm] DM_PPLIB: 1128000
[drm] DM_PPLIB: 1191000
[drm] DM_PPLIB: 1233000
[drm] DM_PPLIB: 1268000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 126800
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 1000000
[drm] DM_PPLIB: 1750000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 126800
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.2.48!
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
kfd kfd: Allocated 3969056 bytes on gart
Virtual CRAT table created for GPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add dGPU node [0x67df:0x1002]
kfd kfd: added device 1002:67df
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[drm] fb mappable at 0xE0830000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
usb 1-8: New USB device found, idVendor=c0f4, idProduct=01b0, bcdDevice= 1.10
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: usb keyboard
usb 1-8: Manufacturer: USB
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.35.0 20150101 for 0000:01:00.0 on minor 0
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 60:45:cb:a7:38:97
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
ata5: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ATA-10: WDC WD10EZEX-00WN4A0, 01.01A01, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-10: WDC WDS240G2G0B-00EPW0, UJ400400, max UDMA/133
ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32)
ata2.00: configured for UDMA/133
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WDS240G2G0B- 0400 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-00W 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sdb:
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-11: new full-speed USB device number 3 using xhci_hcd
usb 1-11: New USB device found, idVendor=248a, idProduct=8514, bcdDevice= 1.00
usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-11: Product: Wireless Receiver
usb 1-11: Manufacturer: Telink
usb 1-12: new low-speed USB device number 4 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3192.000 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02c4a121d, max_idle_ns: 440795236083 ns
clocksource: Switched to clocksource tsc
usb 1-12: New USB device found, idVendor=081f, idProduct=e401, bcdDevice= 1.06
usb 1-12: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-12: Product: USB gamepad
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB usb keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:C0F4:01B0.0001/input/input3
hid-generic 0003:C0F4:01B0.0001: input,hidraw0: USB HID v1.10 Keyboard [USB usb keyboard] on usb-0000:00:14.0-8/input0
input: USB usb keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:C0F4:01B0.0002/input/input4
input: USB usb keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:C0F4:01B0.0002/input/input5
hid-generic 0003:C0F4:01B0.0002: input,hidraw1: USB HID v1.10 Device [USB usb keyboard] on usb-0000:00:14.0-8/input1
input: Telink Wireless Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:248A:8514.0003/input/input6
input: Telink Wireless Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:248A:8514.0003/input/input7
input: Telink Wireless Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:248A:8514.0003/input/input8
hid-generic 0003:248A:8514.0003: input,hidraw2: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:14.0-11/input0
input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:248A:8514.0004/input/input9
hid-generic 0003:248A:8514.0004: input,hidraw3: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:14.0-11/input1
input: USB gamepad as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:081F:E401.0005/input/input10
hid-generic 0003:081F:E401.0005: input,hidraw4: USB HID v1.10 Joystick [USB gamepad ] on usb-0000:00:14.0-12/input0
raid6: avx2x4 gen() 35952 MB/s
raid6: avx2x4 xor() 21005 MB/s
raid6: avx2x2 gen() 31403 MB/s
raid6: avx2x2 xor() 19696 MB/s
raid6: avx2x1 gen() 25461 MB/s
raid6: avx2x1 xor() 18091 MB/s
raid6: sse2x4 gen() 15000 MB/s
raid6: sse2x4 xor() 9331 MB/s
raid6: sse2x2 gen() 12862 MB/s
raid6: sse2x2 xor() 8567 MB/s
raid6: sse2x1 gen() 11453 MB/s
raid6: sse2x1 xor() 6449 MB/s
raid6: using algorithm avx2x4 gen() 35952 MB/s
raid6: .... xor() 21005 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/veeamservice.service:7: PIDFile= references a path below legacy directory /var/run/, updating /var/run/veeamservice.pid → /run/veeamservice.pid; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Finished Create list of static device nodes for the current kernel.
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Started Journal Service.
systemd-journald[354]: Received client request to flush runtime journal.
asus_wmi: ASUS WMI generic driver loaded
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input11
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
kvm: disabled by bios
kvm: disabled by bios
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain dram
kvm: disabled by bios
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
kvm: disabled by bios
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
Adding 4882428k swap on /dev/sda2. Priority:-2 extents:1 across:4882428k SSFS
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
audit: type=1400 audit(1599894608.488:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1599894608.488:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1599894608.488:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=638 comm="apparmor_parser"
audit: type=1400 audit(1599894608.500:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=636 comm="apparmor_parser"
audit: type=1400 audit(1599894608.500:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=636 comm="apparmor_parser"
audit: type=1400 audit(1599894608.500:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=636 comm="apparmor_parser"
audit: type=1400 audit(1599894608.500:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=636 comm="apparmor_parser"
audit: type=1400 audit(1599894608.500:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=641 comm="apparmor_parser"
audit: type=1400 audit(1599894608.504:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=639 comm="apparmor_parser"
kauditd_printk_skb: 14 callbacks suppressed
audit: type=1400 audit(1599894609.672:25): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=821 comm="cups-browsed" capability=23 capname="sys_nice"
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready