dmesg - test1
Linux version 5.4.0-7634-generic (buildd@lgw01-amd64-017) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #38~1592497129~20.04~9a1ea2e-Ubuntu SMP Fri Jun 19 22:43:37 UTC (Ubuntu 5.4.0-7634.38~1592497129~20.04~9a1ea2e-generic 5.4.41)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d81fff] usable
BIOS-e820: [mem 0x0000000009d82000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
BIOS-e820: [mem 0x000000000a20c000-0x00000000db9f3fff] usable
BIOS-e820: [mem 0x00000000db9f4000-0x00000000dbbb7fff] reserved
BIOS-e820: [mem 0x00000000dbbb8000-0x00000000dbc7cfff] usable
BIOS-e820: [mem 0x00000000dbc7d000-0x00000000dbd9cfff] ACPI NVS
BIOS-e820: [mem 0x00000000dbd9d000-0x00000000dcb88fff] reserved
BIOS-e820: [mem 0x00000000dcb89000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000081f2fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xd6885018-0xd6893057] usable ==> usable
e820: update [mem 0xd6885018-0xd6893057] usable ==> usable
e820: update [mem 0xd6840018-0xd6860257] usable ==> usable
e820: update [mem 0xd6840018-0xd6860257] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009d81fff] usable
reserve setup_data: [mem 0x0000000009d82000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
reserve setup_data: [mem 0x000000000a20c000-0x00000000d6840017] usable
reserve setup_data: [mem 0x00000000d6840018-0x00000000d6860257] usable
reserve setup_data: [mem 0x00000000d6860258-0x00000000d6885017] usable
reserve setup_data: [mem 0x00000000d6885018-0x00000000d6893057] usable
reserve setup_data: [mem 0x00000000d6893058-0x00000000db9f3fff] usable
reserve setup_data: [mem 0x00000000db9f4000-0x00000000dbbb7fff] reserved
reserve setup_data: [mem 0x00000000dbbb8000-0x00000000dbc7cfff] usable
reserve setup_data: [mem 0x00000000dbc7d000-0x00000000dbd9cfff] ACPI NVS
reserve setup_data: [mem 0x00000000dbd9d000-0x00000000dcb88fff] reserved
reserve setup_data: [mem 0x00000000dcb89000-0x00000000deffffff] usable
reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000081f2fffff] usable
efi: EFI v2.70 by American Megatrends
efi: ACPI 2.0=0xdbd19000 ACPI=0xdbd19000 SMBIOS=0xdc9cd000 MEMATTR=0xd8f89018 ESRT=0xd8f8bf98
secureboot: Secure boot disabled
SMBIOS 2.8 present.
DMI: Micro-Star International Co., Ltd. MS-7C37/X570-A PRO (MS-7C37), BIOS H.84 05/13/2020
tsc: Fast TSC calibration failed
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x81f300 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DC190000 mask FFFFFFFF0000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000820000000 aka 33280M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 3583M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G
e820: update [mem 0xdc190000-0xdc19ffff] usable ==> reserved
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000d8f8bf98 to 0x00000000d8f8bfd0.
e820: update [mem 0xd8f8b000-0xd8f8bfff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x7ebc01000, 0x7ebc01fff] PGTABLE
BRK [0x7ebc02000, 0x7ebc02fff] PGTABLE
BRK [0x7ebc03000, 0x7ebc03fff] PGTABLE
BRK [0x7ebc04000, 0x7ebc04fff] PGTABLE
BRK [0x7ebc05000, 0x7ebc05fff] PGTABLE
BRK [0x7ebc06000, 0x7ebc06fff] PGTABLE
BRK [0x7ebc07000, 0x7ebc07fff] PGTABLE
BRK [0x7ebc08000, 0x7ebc08fff] PGTABLE
BRK [0x7ebc09000, 0x7ebc09fff] PGTABLE
BRK [0x7ebc0a000, 0x7ebc0afff] PGTABLE
BRK [0x7ebc0b000, 0x7ebc0bfff] PGTABLE
BRK [0x7ebc0c000, 0x7ebc0cfff] PGTABLE
secureboot: Secure boot disabled
RAMDISK: [mem 0x7ae25000-0x7fffefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DBD19000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DBD19098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DBD20D08 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DBD191E8 007B20 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DBD85E00 000040
ACPI: APIC 0x00000000DBD20E20 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DBD20F80 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DBD20FC8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DBD21068 000164 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: SSDT 0x00000000DBD211D0 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DBD29E68 003566 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DBD2D3D0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000DBD2D410 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DBD2D448 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DBD2D470 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: IVRS 0x00000000DBD2D4B8 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: PCCT 0x00000000DBD2D588 00006E (v01 AMD AMD PCCT 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DBD2D5F8 005E09 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DBD33408 001658 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DBD34A60 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DBD34A90 001D4A (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: WSMT 0x00000000DBD367E0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000081f2fffff]
NODE_DATA(0) allocated [mem 0x81f2d5000-0x81f2fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000081f2fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009d81fff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a20c000-0x00000000db9f3fff]
node 0: [mem 0x00000000dbbb8000-0x00000000dbc7cfff]
node 0: [mem 0x00000000dcb89000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000081f2fffff]
Zeroed struct page in unavailable ranges: 12475 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000081f2fffff]
On node 0 totalpages: 8376133
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 14131 pages used for memmap
DMA32 zone: 904358 pages, LIFO batch:63
Normal zone: 116684 pages used for memmap
Normal zone: 7467776 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 25, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 26, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 32 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09d82000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0a200000-0x0a20bfff]
PM: Registered nosave memory: [mem 0xd6840000-0xd6840fff]
PM: Registered nosave memory: [mem 0xd6860000-0xd6860fff]
PM: Registered nosave memory: [mem 0xd6885000-0xd6885fff]
PM: Registered nosave memory: [mem 0xd6893000-0xd6893fff]
PM: Registered nosave memory: [mem 0xd8f8b000-0xd8f8bfff]
PM: Registered nosave memory: [mem 0xdb9f4000-0xdbbb7fff]
PM: Registered nosave memory: [mem 0xdbc7d000-0xdbd9cfff]
PM: Registered nosave memory: [mem 0xdbd9d000-0xdcb88fff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists, mobility grouping on. Total pages: 8245228
Policy zone: Normal
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32621732K/33504532K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 882800K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 44480 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: PIT calibration matches HPET. 2 loops
tsc: Detected 3800.097 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d8d6979a45, max_idle_ns: 881591148087 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7600.19 BogoMIPS (lpj=15200388)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Ryzen 9 3900X 12-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23
smp: Brought up 1 node, 24 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 24 processors activated (182404.65 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20bfff] (49152 bytes)
PM: Registering ACPI NVS region [mem 0xdbc7d000-0xdbd9cfff] (1179648 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 19:04:57, date: 2020-07-03
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
EISA bus registered
audit: type=2000 audit(1593803097.200:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec02fff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:1484] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:08.3: [1022:1484] type 01 class 0x060400
pci 0000:00:08.3: enabling Extended Tags
pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
pci 0000:20:00.0: [1022:57ad] type 01 class 0x060400
pci 0000:20:00.0: enabling Extended Tags
pci 0000:20:00.0: PME# supported from D0 D3hot D3cold
pci 0000:20:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16 GT/s x8 link)
pci 0000:00:01.2: PCI bridge to [bus 20-2c]
pci 0000:00:01.2: bridge window [io 0xd000-0xefff]
pci 0000:00:01.2: bridge window [mem 0xf7200000-0xf77fffff]
pci 0000:21:03.0: [1022:57a3] type 01 class 0x060400
pci 0000:21:03.0: enabling Extended Tags
pci 0000:21:03.0: PME# supported from D0 D3hot D3cold
pci 0000:21:04.0: [1022:57a3] type 01 class 0x060400
pci 0000:21:04.0: enabling Extended Tags
pci 0000:21:04.0: PME# supported from D0 D3hot D3cold
pci 0000:21:05.0: [1022:57a3] type 01 class 0x060400
pci 0000:21:05.0: enabling Extended Tags
pci 0000:21:05.0: PME# supported from D0 D3hot D3cold
pci 0000:21:08.0: [1022:57a4] type 01 class 0x060400
pci 0000:21:08.0: enabling Extended Tags
pci 0000:21:08.0: PME# supported from D0 D3hot D3cold
pci 0000:21:0a.0: [1022:57a4] type 01 class 0x060400
pci 0000:21:0a.0: enabling Extended Tags
pci 0000:21:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:20:00.0: PCI bridge to [bus 21-2c]
pci 0000:20:00.0: bridge window [io 0xd000-0xefff]
pci 0000:20:00.0: bridge window [mem 0xf7200000-0xf77fffff]
pci 0000:25:00.0: [8086:2526] type 00 class 0x028000
pci 0000:25:00.0: reg 0x10: [mem 0xf7700000-0xf7703fff 64bit]
pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
pci 0000:21:03.0: PCI bridge to [bus 25]
pci 0000:21:03.0: bridge window [mem 0xf7700000-0xf77fffff]
pci 0000:26:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:26:00.0: reg 0x10: [io 0xe050-0xe057]
pci 0000:26:00.0: reg 0x14: [io 0xe040-0xe043]
pci 0000:26:00.0: reg 0x18: [io 0xe030-0xe037]
pci 0000:26:00.0: reg 0x1c: [io 0xe020-0xe023]
pci 0000:26:00.0: reg 0x20: [io 0xe000-0xe01f]
pci 0000:26:00.0: reg 0x24: [mem 0xf7600000-0xf76001ff]
pci 0000:21:04.0: PCI bridge to [bus 26]
pci 0000:21:04.0: bridge window [io 0xe000-0xefff]
pci 0000:21:04.0: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:27:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:27:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:27:00.0: reg 0x18: [mem 0xf7504000-0xf7504fff 64bit]
pci 0000:27:00.0: reg 0x20: [mem 0xf7500000-0xf7503fff 64bit]
pci 0000:27:00.0: supports D1 D2
pci 0000:27:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:21:05.0: PCI bridge to [bus 27]
pci 0000:21:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:21:05.0: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:2a:00.0: [1022:1485] type 00 class 0x130000
pci 0000:2a:00.0: enabling Extended Tags
pci 0000:2a:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:2a:00.1: [1022:149c] type 00 class 0x0c0330
pci 0000:2a:00.1: reg 0x10: [mem 0xf7300000-0xf73fffff 64bit]
pci 0000:2a:00.1: enabling Extended Tags
pci 0000:2a:00.1: PME# supported from D0 D3hot D3cold
pci 0000:2a:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:2a:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
pci 0000:2a:00.3: enabling Extended Tags
pci 0000:2a:00.3: PME# supported from D0 D3hot D3cold
pci 0000:21:08.0: PCI bridge to [bus 2a]
pci 0000:21:08.0: bridge window [mem 0xf7200000-0xf73fffff]
pci 0000:2c:00.0: [1022:7901] type 00 class 0x010601
pci 0000:2c:00.0: reg 0x24: [mem 0xf7400000-0xf74007ff]
pci 0000:2c:00.0: enabling Extended Tags
pci 0000:2c:00.0: PME# supported from D3hot D3cold
pci 0000:2c:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:21:0a.0: PCI bridge to [bus 2c]
pci 0000:21:0a.0: bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:2d:00.0: [10de:1e07] type 00 class 0x030000
pci 0000:2d:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:2d:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:2d:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:2d:00.0: reg 0x24: [io 0xf000-0xf07f]
pci 0000:2d:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:2d:00.0: BAR 1: assigned to efifb
pci 0000:2d:00.0: PME# supported from D0 D3hot
pci 0000:2d:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:2d:00.1: [10de:10f7] type 00 class 0x040300
pci 0000:2d:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:2d:00.2: [10de:1ad6] type 00 class 0x0c0330
pci 0000:2d:00.2: reg 0x10: [mem 0xf2000000-0xf203ffff 64bit pref]
pci 0000:2d:00.2: reg 0x1c: [mem 0xf2040000-0xf204ffff 64bit pref]
pci 0000:2d:00.2: PME# supported from D0 D3hot
pci 0000:2d:00.3: [10de:1ad7] type 00 class 0x0c8000
pci 0000:2d:00.3: reg 0x10: [mem 0xf7084000-0xf7084fff]
pci 0000:2d:00.3: PME# supported from D0 D3hot
pci 0000:00:03.1: PCI bridge to [bus 2d]
pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf20fffff 64bit pref]
pci 0000:2e:00.0: [1022:148a] type 00 class 0x130000
pci 0000:2e:00.0: enabling Extended Tags
pci 0000:00:07.1: PCI bridge to [bus 2e]
pci 0000:2f:00.0: [1022:1485] type 00 class 0x130000
pci 0000:2f:00.0: enabling Extended Tags
pci 0000:2f:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:2f:00.3: reg 0x10: [mem 0xf7800000-0xf78fffff 64bit]
pci 0000:2f:00.3: enabling Extended Tags
pci 0000:2f:00.3: PME# supported from D0 D3hot D3cold
pci 0000:2f:00.4: [1022:1487] type 00 class 0x040300
pci 0000:2f:00.4: reg 0x10: [mem 0xf7900000-0xf7907fff]
pci 0000:2f:00.4: enabling Extended Tags
pci 0000:2f:00.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 2f]
pci 0000:00:08.1: bridge window [mem 0xf7800000-0xf79fffff]
pci 0000:30:00.0: [1022:7901] type 00 class 0x010601
pci 0000:30:00.0: reg 0x24: [mem 0xf7b00000-0xf7b007ff]
pci 0000:30:00.0: enabling Extended Tags
pci 0000:30:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 30]
pci 0000:00:08.2: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:31:00.0: [1022:7901] type 00 class 0x010601
pci 0000:31:00.0: reg 0x24: [mem 0xf7a00000-0xf7a007ff]
pci 0000:31:00.0: enabling Extended Tags
pci 0000:31:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.3: PCI bridge to [bus 31]
pci 0000:00:08.3: bridge window [mem 0xf7a00000-0xf7afffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:2d:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:2d:00.0: vgaarb: bridge control possible
pci 0000:2d:00.0: vgaarb: setting as boot device
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x09d82000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0xd6840018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd6885018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd8f8b000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb9f4000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbc7d000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x81f300000-0x81fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfd000000-0xfd0fffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: [io 0x0a10-0x0a1f] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: [io 0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] has been reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:21:03.0: PCI bridge to [bus 25]
pci 0000:21:03.0: bridge window [mem 0xf7700000-0xf77fffff]
pci 0000:21:04.0: PCI bridge to [bus 26]
pci 0000:21:04.0: bridge window [io 0xe000-0xefff]
pci 0000:21:04.0: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:21:05.0: PCI bridge to [bus 27]
pci 0000:21:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:21:05.0: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:21:08.0: PCI bridge to [bus 2a]
pci 0000:21:08.0: bridge window [mem 0xf7200000-0xf73fffff]
pci 0000:21:0a.0: PCI bridge to [bus 2c]
pci 0000:21:0a.0: bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:20:00.0: PCI bridge to [bus 21-2c]
pci 0000:20:00.0: bridge window [io 0xd000-0xefff]
pci 0000:20:00.0: bridge window [mem 0xf7200000-0xf77fffff]
pci 0000:00:01.2: PCI bridge to [bus 20-2c]
pci 0000:00:01.2: bridge window [io 0xd000-0xefff]
pci 0000:00:01.2: bridge window [mem 0xf7200000-0xf77fffff]
pci 0000:00:03.1: PCI bridge to [bus 2d]
pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf20fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 2e]
pci 0000:00:08.1: PCI bridge to [bus 2f]
pci 0000:00:08.1: bridge window [mem 0xf7800000-0xf79fffff]
pci 0000:00:08.2: PCI bridge to [bus 30]
pci 0000:00:08.2: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:08.3: PCI bridge to [bus 31]
pci 0000:00:08.3: bridge window [mem 0xf7a00000-0xf7afffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec02fff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:20: resource 0 [io 0xd000-0xefff]
pci_bus 0000:20: resource 1 [mem 0xf7200000-0xf77fffff]
pci_bus 0000:21: resource 0 [io 0xd000-0xefff]
pci_bus 0000:21: resource 1 [mem 0xf7200000-0xf77fffff]
pci_bus 0000:25: resource 1 [mem 0xf7700000-0xf77fffff]
pci_bus 0000:26: resource 0 [io 0xe000-0xefff]
pci_bus 0000:26: resource 1 [mem 0xf7600000-0xf76fffff]
pci_bus 0000:27: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:27: resource 1 [mem 0xf7500000-0xf75fffff]
pci_bus 0000:2a: resource 1 [mem 0xf7200000-0xf73fffff]
pci_bus 0000:2c: resource 1 [mem 0xf7400000-0xf74fffff]
pci_bus 0000:2d: resource 0 [io 0xf000-0xffff]
pci_bus 0000:2d: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:2d: resource 2 [mem 0xe0000000-0xf20fffff 64bit pref]
pci_bus 0000:2f: resource 1 [mem 0xf7800000-0xf79fffff]
pci_bus 0000:30: resource 1 [mem 0xf7b00000-0xf7bfffff]
pci_bus 0000:31: resource 1 [mem 0xf7a00000-0xf7afffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:2d:00.1: D0 power state depends on 0000:2d:00.0
pci 0000:2d:00.2: D0 power state depends on 0000:2d:00.0
pci 0000:2d:00.3: D0 power state depends on 0000:2d:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 83816K
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.2: Adding to iommu group 1
pci 0000:00:02.0: Adding to iommu group 2
pci 0000:00:03.0: Adding to iommu group 3
pci 0000:00:03.1: Adding to iommu group 4
pci 0000:00:04.0: Adding to iommu group 5
pci 0000:00:05.0: Adding to iommu group 6
pci 0000:00:07.0: Adding to iommu group 7
pci 0000:00:07.1: Adding to iommu group 8
pci 0000:00:08.0: Adding to iommu group 9
pci 0000:00:08.1: Adding to iommu group 10
pci 0000:00:08.2: Adding to iommu group 11
pci 0000:00:08.3: Adding to iommu group 12
pci 0000:00:14.0: Adding to iommu group 13
pci 0000:00:14.3: Adding to iommu group 13
pci 0000:00:18.0: Adding to iommu group 14
pci 0000:00:18.1: Adding to iommu group 14
pci 0000:00:18.2: Adding to iommu group 14
pci 0000:00:18.3: Adding to iommu group 14
pci 0000:00:18.4: Adding to iommu group 14
pci 0000:00:18.5: Adding to iommu group 14
pci 0000:00:18.6: Adding to iommu group 14
pci 0000:00:18.7: Adding to iommu group 14
pci 0000:20:00.0: Adding to iommu group 15
pci 0000:21:03.0: Adding to iommu group 16
pci 0000:21:04.0: Adding to iommu group 17
pci 0000:21:05.0: Adding to iommu group 18
pci 0000:21:08.0: Adding to iommu group 19
pci 0000:21:0a.0: Adding to iommu group 20
pci 0000:25:00.0: Adding to iommu group 21
pci 0000:26:00.0: Adding to iommu group 22
pci 0000:27:00.0: Adding to iommu group 23
pci 0000:2a:00.0: Adding to iommu group 19
pci 0000:2a:00.1: Adding to iommu group 19
pci 0000:2a:00.3: Adding to iommu group 19
pci 0000:2c:00.0: Adding to iommu group 20
pci 0000:2d:00.0: Adding to iommu group 24
pci 0000:2d:00.1: Adding to iommu group 24
pci 0000:2d:00.2: Adding to iommu group 24
pci 0000:2d:00.3: Adding to iommu group 24
pci 0000:2e:00.0: Adding to iommu group 25
pci 0000:2f:00.0: Adding to iommu group 26
pci 0000:2f:00.3: Adding to iommu group 27
pci 0000:2f:00.4: Adding to iommu group 28
pci 0000:30:00.0: Adding to iommu group 29
pci 0000:31:00.0: Adding to iommu group 30
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0x58f77ef22294ade):
PPR X2APIC NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: X2APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.2: AER: enabled with IRQ 27
pcieport 0000:00:03.1: AER: enabled with IRQ 28
pcieport 0000:00:07.1: AER: enabled with IRQ 30
pcieport 0000:00:08.1: AER: enabled with IRQ 31
pcieport 0000:00:08.2: AER: enabled with IRQ 32
pcieport 0000:00:08.3: AER: enabled with IRQ 33
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:2a:00.1: xHCI Host Controller
xhci_hcd 0000:2a:00.1: new USB bus registered, assigned bus number 1
xhci_hcd 0000:2a:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb1: SerialNumber: 0000:2a:00.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:2a:00.1: xHCI Host Controller
xhci_hcd 0000:2a:00.1: new USB bus registered, assigned bus number 2
xhci_hcd 0000:2a:00.1: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb2: SerialNumber: 0000:2a:00.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:2a:00.3: xHCI Host Controller
xhci_hcd 0000:2a:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:2a:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb3: SerialNumber: 0000:2a:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
xhci_hcd 0000:2a:00.3: xHCI Host Controller
xhci_hcd 0000:2a:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:2a:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb4: SerialNumber: 0000:2a:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:2d:00.2: xHCI Host Controller
xhci_hcd 0000:2d:00.2: new USB bus registered, assigned bus number 5
xhci_hcd 0000:2d:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb5: SerialNumber: 0000:2d:00.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:2d:00.2: xHCI Host Controller
xhci_hcd 0000:2d:00.2: new USB bus registered, assigned bus number 6
xhci_hcd 0000:2d:00.2: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb6: SerialNumber: 0000:2d:00.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
xhci_hcd 0000:2f:00.3: xHCI Host Controller
xhci_hcd 0000:2f:00.3: new USB bus registered, assigned bus number 7
xhci_hcd 0000:2f:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb7: SerialNumber: 0000:2f:00.3
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
xhci_hcd 0000:2f:00.3: xHCI Host Controller
xhci_hcd 0000:2f:00.3: new USB bus registered, assigned bus number 8
xhci_hcd 0000:2f:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb8: SerialNumber: 0000:2f:00.3
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08701021
microcode: CPU1: patch_level=0x08701021
microcode: CPU2: patch_level=0x08701021
microcode: CPU3: patch_level=0x08701021
microcode: CPU4: patch_level=0x08701021
microcode: CPU5: patch_level=0x08701021
microcode: CPU6: patch_level=0x08701021
microcode: CPU7: patch_level=0x08701021
microcode: CPU8: patch_level=0x08701021
microcode: CPU9: patch_level=0x08701021
microcode: CPU10: patch_level=0x08701021
microcode: CPU11: patch_level=0x08701021
microcode: CPU12: patch_level=0x08701021
microcode: CPU13: patch_level=0x08701021
microcode: CPU14: patch_level=0x08701021
microcode: CPU15: patch_level=0x08701021
microcode: CPU16: patch_level=0x08701021
microcode: CPU17: patch_level=0x08701021
microcode: CPU18: patch_level=0x08701021
microcode: CPU19: patch_level=0x08701021
microcode: CPU20: patch_level=0x08701021
microcode: CPU21: patch_level=0x08701021
microcode: CPU22: patch_level=0x08701021
microcode: CPU23: patch_level=0x08701021
microcode: Microcode Update Driver: v2.2.
*** VALIDATE rdt ***
resctrl: L3 allocation detected
resctrl: L3DATA allocation detected
resctrl: L3CODE allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (415533205, -31997330)->(387825280, -4289405)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: b29621d343e779673d9b82cdbcd5e89612fb785a'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 12:758:90
edac: hash matches
memory memory243: hash matches
rtc_cmos 00:02: setting system clock to 2020-07-03T19:04:58 UTC (1593803098)
acpi_cpufreq: overriding BIOS provided _PSD data
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1192K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
r8168: loading out-of-tree module taints kernel.
r8168: module verification failed: signature and/or required key missing - tainting kernel
r8168 Gigabit Ethernet driver 8.048.00-NAPI loaded
r8168 0000:27:00.0: enabling device (0000 -> 0003)
ahci 0000:26:00.0: version 3.0
ahci 0000:26:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:26:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:26:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m512@0xf7600000 port 0xf7600100 irq 62
ata2: SATA max UDMA/133 abar m512@0xf7600000 port 0xf7600180 irq 62
ahci 0000:2c:00.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x31 impl SATA mode
ahci 0000:2c:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host2: ahci
scsi host3: ahci
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
scsi host4: ahci
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata3: SATA max UDMA/133 abar m2048@0xf7400000 port 0xf7400100 irq 63
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ata7: SATA max UDMA/133 abar m2048@0xf7400000 port 0xf7400300 irq 67
ata8: SATA max UDMA/133 abar m2048@0xf7400000 port 0xf7400380 irq 68
ahci 0000:30:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:30:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host8: ahci
ata9: SATA max UDMA/133 abar m2048@0xf7b00000 port 0xf7b00100 irq 80
ahci 0000:31:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:31:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host9: ahci
ata10: SATA max UDMA/133 abar m2048@0xf7a00000 port 0xf7a00100 irq 82
r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
r8168 Copyright (C) 2019 Realtek NIC software team
This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
This is free software, and you are welcome to redistribute it under certain conditions; see .
r8168 0000:27:00.0 enp39s0: renamed from eth0
usb 1-2: new high-speed USB device number 2 using xhci_hcd
usb 3-5: new full-speed USB device number 2 using xhci_hcd
usb 7-3: new high-speed USB device number 2 using xhci_hcd
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
usb 7-3: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
usb 7-3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 7-3: SerialNumber: F70708696B90
usb 1-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
usb 1-2: Manufacturer: GenesysLogic
usb 3-5: New USB device found, idVendor=1462, idProduct=7c37, bcdDevice= 0.01
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-5: Product: MYSTIC LIGHT
usb 3-5: Manufacturer: MSI
usb 3-5: SerialNumber: A02019050806
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: MSI MYSTIC LIGHT as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.3/usb3/3-5/3-5:1.0/0003:1462:7C37.0001/input/input2
hid-generic 0003:1462:7C37.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [MSI MYSTIC LIGHT ] on usb-0000:2a:00.3-5/input0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
hub 7-3:1.0: USB hub found
hub 7-3:1.0: 4 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-8: ST1000DM003-1SB102, CC43, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata3.00: configured for UDMA/133
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8.00: ATA-9: WDC WD30EZRZ-00Z5HB0, 80.00A80, max UDMA/133
ata8.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata8.00: configured for UDMA/133
ata7.00: ATA-10: CT480BX500SSD1, M6CR022, max UDMA/133
ata7.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] supports TCG Opal
sd 0:0:0:0: [sda] Attached SCSI disk
ata7.00: configured for UDMA/133
usb 8-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 8-3: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
usb 8-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: New USB device found, idVendor=1058, idProduct=25e2, bcdDevice=40.05
usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-1: Product: My Passport 25E2
usb 2-1: Manufacturer: Western Digital
usb 2-1: SerialNumber: 575838314438384B31324336
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 3-6: new high-speed USB device number 3 using xhci_hcd
hub 8-3:1.0: USB hub found
hub 8-3:1.0: 4 ports detected
usb 7-4: new high-speed USB device number 3 using xhci_hcd
usb 1-5: new full-speed USB device number 3 using xhci_hcd
usb 3-6: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
usb 3-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-6: Product: USB2.0 Hub
hub 3-6:1.0: USB hub found
hub 3-6:1.0: 4 ports detected
ata2: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1SB1 CC43 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:0:0: Direct-Access ATA CT480BX500SSD1 R022 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 7:0:0:0: Direct-Access ATA WDC WD30EZRZ-00Z 0A80 PQ: 0 ANSI: 5
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 7:0:0:0: [sdd] 4096-byte physical blocks
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3 sdc4
sd 6:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
usb 7-4: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0
usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-4: Product: USB2.0 Hub
usb 7-4: Manufacturer: VIA Labs, Inc.
sd 7:0:0:0: [sdd] Attached SCSI disk
usb 1-5: New USB device found, idVendor=b58e, idProduct=9e84, bcdDevice= 1.00
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Yeti Stereo Microphone
usb 1-5: Manufacturer: Blue Microphones
usb 1-5: SerialNumber: REV8
input: Blue Microphones Yeti Stereo Microphone Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-5/1-5:1.3/0003:B58E:9E84.0002/input/input3
hub 7-4:1.0: USB hub found
hub 7-4:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 3799.998 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d8cab05ec1, max_idle_ns: 881590646801 ns
clocksource: Switched to clocksource tsc
hid-generic 0003:B58E:9E84.0002: input,hiddev1,hidraw1: USB HID v1.00 Device [Blue Microphones Yeti Stereo Microphone] on usb-0000:2a:00.1-5/input3
usb 8-4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
usb 2-2: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.16
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB3.0 Hub
usb 2-2: Manufacturer: GenesysLogic
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 1-2.1: new high-speed USB device number 4 using xhci_hcd
usb 3-6.1: new full-speed USB device number 4 using xhci_hcd
usb 3-6.1: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
usb 3-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 8-4: New USB device found, idVendor=2109, idProduct=0812, bcdDevice= b.e1
usb 8-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-4: Product: USB3.0 Hub
usb 8-4: Manufacturer: VIA Labs, Inc.
hub 8-4:1.0: USB hub found
hub 8-4:1.0: 4 ports detected
usb 7-3.1: new full-speed USB device number 4 using xhci_hcd
usb 7-3.1: New USB device found, idVendor=fc08, idProduct=0101, bcdDevice= 2.50
usb 7-3.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 7-3.1: Product: USB MIDI Interface
usb 8-3.4: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
usb 8-3.4: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
usb 8-3.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-3.4:1.0: USB hub found
hub 8-3.4:1.0: 2 ports detected
usb 7-4.3: new high-speed USB device number 5 using xhci_hcd
scsi 10:0:0:0: Direct-Access WD My Passport 25E2 4005 PQ: 0 ANSI: 6
scsi 10:0:0:1: Enclosure WD SES Device 4005 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg4 type 0
sd 10:0:0:1: Attached scsi generic sg5 type 13
sd 10:0:0:0: [sde] Very big device. Trying to use READ CAPACITY(16).
sd 10:0:0:0: [sde] 7813969920 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 10:0:0:0: [sde] 4096-byte physical blocks
sd 10:0:0:0: [sde] Write Protect is off
sd 10:0:0:0: [sde] Mode Sense: 47 00 10 08
sd 10:0:0:0: [sde] No Caching mode page found
sd 10:0:0:0: [sde] Assuming drive cache: write through
scsi 10:0:0:1: Wrong diagnostic page; asked for 1 got 8
scsi 10:0:0:1: Failed to get diagnostic page 0x1
scsi 10:0:0:1: Failed to bind enclosure -19
sde: sde1 sde2
sd 10:0:0:0: [sde] Attached SCSI disk
ses 10:0:0:1: Attached Enclosure device
usb 7-4.3: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0
usb 7-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-4.3: Product: USB2.0 Hub
usb 7-4.3: Manufacturer: VIA Labs, Inc.
hub 7-4.3:1.0: USB hub found
hub 7-4.3:1.0: 4 ports detected
usb 7-3.4: new high-speed USB device number 6 using xhci_hcd
usb 7-3.4: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
usb 7-3.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 7-3.4: SerialNumber: 380708696B90
hub 7-3.4:1.0: USB hub found
hub 7-3.4:1.0: 2 ports detected
usb 8-4.3: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd
system76: Model does not utilize this driver
usbcore: registered new interface driver system76-io
raid6: avx2x4 gen() 42580 MB/s
usb 8-4.3: New USB device found, idVendor=2109, idProduct=0812, bcdDevice= b.e1
usb 8-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-4.3: Product: USB3.0 Hub
usb 8-4.3: Manufacturer: VIA Labs, Inc.
hub 8-4.3:1.0: USB hub found
hub 8-4.3:1.0: 4 ports detected
raid6: avx2x4 xor() 21810 MB/s
raid6: avx2x2 gen() 39836 MB/s
usb 7-4.4: new high-speed USB device number 7 using xhci_hcd
raid6: avx2x2 xor() 25874 MB/s
raid6: avx2x1 gen() 22292 MB/s
usb 7-4.4: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0
usb 7-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-4.4: Product: USB2.0 Hub
usb 7-4.4: Manufacturer: VIA Labs, Inc.
raid6: avx2x1 xor() 18771 MB/s
hub 7-4.4:1.0: USB hub found
hub 7-4.4:1.0: 4 ports detected
raid6: sse2x4 gen() 20356 MB/s
usb 7-3.4.1: new full-speed USB device number 8 using xhci_hcd
raid6: sse2x4 xor() 12035 MB/s
raid6: sse2x2 gen() 19639 MB/s
usb 7-3.4.1: New USB device found, idVendor=046d, idProduct=c33c, bcdDevice=19.00
usb 7-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-3.4.1: Product: G513 Carbon Tactile
usb 7-3.4.1: Manufacturer: Logitech
usb 7-3.4.1: SerialNumber: 036C375B3734
raid6: sse2x2 xor() 12829 MB/s
raid6: sse2x1 gen() 9320 MB/s
usb 8-4.4: new SuperSpeed Gen 1 USB device number 6 using xhci_hcd
input: Logitech G513 Carbon Tactile as /devices/pci0000:00/0000:00:08.1/0000:2f:00.3/usb7/7-3/7-3.4/7-3.4.1/7-3.4.1:1.0/0003:046D:C33C.0003/input/input5
raid6: sse2x1 xor() 9495 MB/s
raid6: using algorithm avx2x4 gen() 42580 MB/s
raid6: .... xor() 21810 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
hid-generic 0003:046D:C33C.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech G513 Carbon Tactile] on usb-0000:2f:00.3-3.4.1/input0
input: Logitech G513 Carbon Tactile Keyboard as /devices/pci0000:00/0000:00:08.1/0000:2f:00.3/usb7/7-3/7-3.4/7-3.4.1/7-3.4.1:1.1/0003:046D:C33C.0004/input/input6
EXT4-fs (sdc3): INFO: recovery required on readonly filesystem
EXT4-fs (sdc3): write access will be enabled during recovery
input: Logitech G513 Carbon Tactile Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:2f:00.3/usb7/7-3/7-3.4/7-3.4.1/7-3.4.1:1.1/0003:046D:C33C.0004/input/input7
hid-generic 0003:046D:C33C.0004: input,hiddev2,hidraw3: USB HID v1.11 Keyboard [Logitech G513 Carbon Tactile] on usb-0000:2f:00.3-3.4.1/input1
EXT4-fs (sdc3): recovery complete
EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
usb 8-4.4: New USB device found, idVendor=2109, idProduct=0812, bcdDevice= b.e1
usb 8-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-4.4: Product: USB3.0 Hub
usb 8-4.4: Manufacturer: VIA Labs, Inc.
hub 8-4.4:1.0: USB hub found
hub 8-4.4:1.0: 4 ports detected
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.1pop0~1590695674~20.04~eaac747 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 1-2.1: New USB device found, idVendor=046d, idProduct=082d, bcdDevice= 0.11
usb 1-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=1
usb 1-2.1: Product: HD Pro Webcam C920
usb 1-2.1: SerialNumber: 4FAD276F
usb 1-2.2: new full-speed USB device number 5 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=046d, idProduct=c332, bcdDevice= 3.02
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.2: Product: Gaming Mouse G502
usb 1-2.2: Manufacturer: Logitech
usb 1-2.2: SerialNumber: 027438513136
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-2/1-2.2/1-2.2:1.0/0003:046D:C332.0005/input/input10
hid-generic 0003:046D:C332.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:2a:00.1-2.2/input0
input: Logitech Gaming Mouse G502 Keyboard as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C332.0006/input/input11
input: Logitech Gaming Mouse G502 Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C332.0006/input/input12
input: Logitech Gaming Mouse G502 System Control as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C332.0006/input/input13
hid-generic 0003:046D:C332.0006: input,hiddev3,hidraw5: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:2a:00.1-2.2/input1
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/fancontrol.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-postfix.slice.
systemd[1]: Created slice Cryptsetup Units Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 664 (systemd-binfmt)
systemd[1]: Mounting Arbitrary Executable File Formats File System...
EXT4-fs (sdc3): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Finished Set Up Additional Binary Formats.
lp: driver loaded but no devices found
systemd[1]: Finished Load/Save Random Seed.
ppdev: user-space parallel port driver
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
nct6775: Found NCT6797D or compatible chip at 0x4e:0xa20
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Starting Helper to synchronize boot up for ifupdown...
systemd[1]: Finished Helper to synchronize boot up for ifupdown.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: plymouth-start.service: Succeeded.
systemd[1]: Started Show Plymouth Boot Screen.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
IPMI message handler: version 39.2
ipmi device interface
MCE: In-kernel MCE decoding enabled.
systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
mc: Linux media interface: v0.10
systemd[1]: Started Journal Service.
videodev: Linux video capture interface: v2.00
iwlwifi 0000:25:00.0: enabling device (0000 -> 0002)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
systemd-journald[650]: Received client request to flush runtime journal.
iwlwifi 0000:25:00.0: Found debug destination: EXTERNAL_DRAM
iwlwifi 0000:25:00.0: Found debug configuration: 0
iwlwifi 0000:25:00.0: loaded firmware version 46.6bf1df06.0 op_mode iwlmvm
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
nvidia-nvlink: Nvlink Core is being initialized, major device number 235
nvidia 0000:2d:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
snd_hda_intel 0000:2d:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:2d:00.1: Disabling MSI
snd_hda_intel 0000:2d:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:2f:00.4: enabling device (0000 -> 0002)
uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
iwlwifi 0000:25:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x324
uvcvideo 1-2.1:1.0: Entity type for entity Processing 3 was not initialized!
uvcvideo 1-2.1:1.0: Entity type for entity Extension 6 was not initialized!
uvcvideo 1-2.1:1.0: Entity type for entity Extension 12 was not initialized!
uvcvideo 1-2.1:1.0: Entity type for entity Camera 1 was not initialized!
uvcvideo 1-2.1:1.0: Entity type for entity Extension 8 was not initialized!
uvcvideo 1-2.1:1.0: Entity type for entity Extension 9 was not initialized!
uvcvideo 1-2.1:1.0: Entity type for entity Extension 10 was not initialized!
uvcvideo 1-2.1:1.0: Entity type for entity Extension 11 was not initialized!
input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-2/1-2.1/1-2.1:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
iwlwifi 0000:25:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:25:00.0: Allocated 0x00400000 bytes for firmware monitor.
snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC2D0: inputs:
snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card2/input17
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card2/input18
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card2/input19
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card2/input20
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card2/input21
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card2/input22
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card2/input23
iwlwifi 0000:25:00.0: base HW address: d4:d2:52:5a:e1:eb
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 440.100 Fri May 29 08:45:51 UTC 2020
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:14:04 UTC 2020
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone0: failed to read out thermal zone (-61)
iwlwifi 0000:25:00.0 wlp37s0: renamed from wlan0
[drm] [nvidia-drm] [GPU ID 0x00002d00] Loading driver
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
usbcore: registered new interface driver btusb
Bluetooth: hci0: Firmware revision 0.1 build 26 week 11 2020
EXT4-fs (sdd): mounted filesystem with ordered data mode. Opts: (null)
usbcore: registered new interface driver snd-usb-audio
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input24
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input25
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input26
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input27
FAT-fs (sdc2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
audit: type=1400 audit(1593803104.469:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1567 comm="apparmor_parser"
audit: type=1400 audit(1593803104.469:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1576 comm="apparmor_parser"
audit: type=1400 audit(1593803104.469:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1575 comm="apparmor_parser"
audit: type=1400 audit(1593803104.469:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1563 comm="apparmor_parser"
audit: type=1400 audit(1593803104.469:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1566 comm="apparmor_parser"
audit: type=1400 audit(1593803104.469:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1566 comm="apparmor_parser"
audit: type=1400 audit(1593803104.469:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1568 comm="apparmor_parser"
audit: type=1400 audit(1593803104.469:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1572 comm="apparmor_parser"
audit: type=1400 audit(1593803104.469:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1572 comm="apparmor_parser"
audit: type=1400 audit(1593803104.469:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1572 comm="apparmor_parser"
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NET: Registered protocol family 38
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:2d:00.0 on minor 0
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
nvidia-uvm: Loaded the UVM driver, major device number 511.
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 15
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
enp39s0: 0xffffb349c0075000, 00:d8:61:9f:24:d7, IRQ 61
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 9
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 9
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 9
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 37
r8168: enp39s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp39s0: link becomes ready
FS-Cache: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
CIFS: Attempting to mount //192.168.1.54/HDD Comedor
vboxdrv: Found 24 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3799988086 Hz
vboxdrv: Successfully loaded version 6.1.6_Ubuntu (interface 0x002d0001)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 77
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 26
usb 1-2.1: reset high-speed USB device number 4 using xhci_hcd
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 9
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 12
rfkill: input handler disabled
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -2
rfkill: input handler enabled
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 9
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 6
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
show_signal_msg: 21 callbacks suppressed
SGI_video_sync[6522]: segfault at e6 ip 000056130f1ec24d sp 00007fd1c8e27780 error 6 in DiscordPTB[56130bd4b000+53ad000]
Code: 0f 46 d8 89 df e8 43 00 00 00 4c 89 f7 e8 db 01 00 00 41 8b 46 10 41 8b 4e 18 0f b6 c0 c1 e0 0c 0f b6 c9 c1 e1 14 09 c1 09 d9 01 00 81 e3 ff 0f 00 00 c6 03 00 bf 01 00 00 00 e8 4d 59 f0 01
SGI_video_sync[6541]: segfault at e6 ip 00005654f903f24d sp 00007f6d77a5e780 error 6 in DiscordPTB[5654f5b9e000+53ad000]
Code: 0f 46 d8 89 df e8 43 00 00 00 4c 89 f7 e8 db 01 00 00 41 8b 46 10 41 8b 4e 18 0f b6 c0 c1 e0 0c 0f b6 c9 c1 e1 14 09 c1 09 d9 01 00 81 e3 ff 0f 00 00 c6 03 00 bf 01 00 00 00 e8 4d 59 f0 01
SGI_video_sync[6574]: segfault at e6 ip 000056358b58e24d sp 00007fde51630780 error 6 in DiscordPTB[5635880ed000+53ad000]
Code: 0f 46 d8 89 df e8 43 00 00 00 4c 89 f7 e8 db 01 00 00 41 8b 46 10 41 8b 4e 18 0f b6 c0 c1 e0 0c 0f b6 c9 c1 e1 14 09 c1 09 d9 01 00 81 e3 ff 0f 00 00 c6 03 00 bf 01 00 00 00 e8 4d 59 f0 01
input: Beats Solo³ de shiku (AVRCP) as /devices/virtual/input/input28
input: Beats Solo³ de shiku (AVRCP) as /devices/virtual/input/input29
input: Beats Solo³ de shiku (AVRCP) as /devices/virtual/input/input30
input: Beats Solo³ de shiku (AVRCP) as /devices/virtual/input/input31
input: Beats Solo³ de shiku (AVRCP) as /devices/virtual/input/input32
input: Beats Solo³ de shiku (AVRCP) as /devices/virtual/input/input33
input: Beats Solo³ de shiku (AVRCP) as /devices/virtual/input/input34
SGI_video_sync[87300]: segfault at e6 ip 000055f51427d24d sp 00007f0cc0554780 error 6 in DiscordPTB[55f510ddc000+53ad000]
Code: 0f 46 d8 89 df e8 43 00 00 00 4c 89 f7 e8 db 01 00 00 41 8b 46 10 41 8b 4e 18 0f b6 c0 c1 e0 0c 0f b6 c9 c1 e1 14 09 c1 09 d9 01 00 81 e3 ff 0f 00 00 c6 03 00 bf 01 00 00 00 e8 4d 59 f0 01
SGI_video_sync[87322]: segfault at e6 ip 000055fc361f024d sp 00007ff58bcf6780 error 6 in DiscordPTB[55fc32d4f000+53ad000]
Code: 0f 46 d8 89 df e8 43 00 00 00 4c 89 f7 e8 db 01 00 00 41 8b 46 10 41 8b 4e 18 0f b6 c0 c1 e0 0c 0f b6 c9 c1 e1 14 09 c1 09 d9 01 00 81 e3 ff 0f 00 00 c6 03 00 bf 01 00 00 00 e8 4d 59 f0 01
SGI_video_sync[87362]: segfault at e6 ip 00005613185de24d sp 00007f2089a55780 error 6 in DiscordPTB[56131513d000+53ad000]
Code: 0f 46 d8 89 df e8 43 00 00 00 4c 89 f7 e8 db 01 00 00 41 8b 46 10 41 8b 4e 18 0f b6 c0 c1 e0 0c 0f b6 c9 c1 e1 14 09 c1 09 d9 01 00 81 e3 ff 0f 00 00 c6 03 00 bf 01 00 00 00 e8 4d 59 f0 01
usb 1-5: USB disconnect, device number 3
usb 1-5: new full-speed USB device number 6 using xhci_hcd
usb 1-5: New USB device found, idVendor=b58e, idProduct=9e84, bcdDevice= 1.00
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Yeti Stereo Microphone
usb 1-5: Manufacturer: Blue Microphones
usb 1-5: SerialNumber: REV8
input: Blue Microphones Yeti Stereo Microphone Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-5/1-5:1.3/0003:B58E:9E84.0007/input/input35
hid-generic 0003:B58E:9E84.0007: input,hiddev1,hidraw1: USB HID v1.00 Device [Blue Microphones Yeti Stereo Microphone] on usb-0000:2a:00.1-5/input3
audit: type=1400 audit(1593813609.069:33): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=115904 comm="cups-browsed" capability=23 capname="sys_nice"
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 66
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 3
input: Beats Solo³ de shiku (AVRCP) as /devices/virtual/input/input37
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 51
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 3
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 0
usb 7-4.2: new full-speed USB device number 9 using xhci_hcd
usb 7-4.2: New USB device found, idVendor=057e, idProduct=2009, bcdDevice= 2.10
usb 7-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-4.2: Product: Pro Controller
usb 7-4.2: Manufacturer: Nintendo Co., Ltd.
usb 7-4.2: SerialNumber: 000000000001
input: Nintendo Co., Ltd. Pro Controller as /devices/pci0000:00/0000:00:08.1/0000:2f:00.3/usb7/7-4/7-4.2/7-4.2:1.0/0003:057E:2009.0008/input/input38
hid-generic 0003:057E:2009.0008: input,hidraw6: USB HID v1.11 Joystick [Nintendo Co., Ltd. Pro Controller] on usb-0000:2f:00.3-4.2/input0
input: Microsoft X-Box 360 pad as /devices/virtual/input/input39
usb 8-3: USB disconnect, device number 2
usb 8-3.4: USB disconnect, device number 4
usb 8-3: new SuperSpeed Gen 1 USB device number 7 using xhci_hcd
usb 8-3: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
usb 8-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-3:1.0: USB hub found
hub 8-3:1.0: 4 ports detected
usb 8-3.4: new SuperSpeed Gen 1 USB device number 8 using xhci_hcd
usb 8-3.4: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
usb 8-3.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-3.4:1.0: USB hub found
hub 8-3.4:1.0: 2 ports detected
usb 8-3: USB disconnect, device number 7
usb 8-3.4: USB disconnect, device number 8
usb 8-3: new SuperSpeed Gen 1 USB device number 9 using xhci_hcd
usb 8-3: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
usb 8-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-3:1.0: USB hub found
hub 8-3:1.0: 4 ports detected
usb 8-3.4: new SuperSpeed Gen 1 USB device number 10 using xhci_hcd
usb 8-3.4: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
usb 8-3.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-3.4:1.0: USB hub found
hub 8-3.4:1.0: 2 ports detected
usb 8-3: USB disconnect, device number 9
usb 8-3.4: USB disconnect, device number 10
usb 8-3: new SuperSpeed Gen 1 USB device number 11 using xhci_hcd
usb 8-3: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
usb 8-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-3:1.0: USB hub found
hub 8-3:1.0: 4 ports detected
usb 8-3.4: new SuperSpeed Gen 1 USB device number 12 using xhci_hcd
usb 8-3.4: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
usb 8-3.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-3.4:1.0: USB hub found
hub 8-3.4:1.0: 2 ports detected
usb 8-3: USB disconnect, device number 11
usb 8-3.4: USB disconnect, device number 12
usb 8-3: new SuperSpeed Gen 1 USB device number 13 using xhci_hcd
usb 8-3: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
usb 8-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-3:1.0: USB hub found
hub 8-3:1.0: 4 ports detected
usb 8-3.4: new SuperSpeed Gen 1 USB device number 14 using xhci_hcd
usb 8-3.4: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
usb 8-3.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-3.4:1.0: USB hub found
hub 8-3.4:1.0: 2 ports detected