dmesg - testin1

Return To testin1 System Information

Linux version 5.4.0-40-generic (buildd@lcy01-amd64-011) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #44-Ubuntu SMP Tue Jun 23 00:01:04 UTC 2020 (Ubuntu 5.4.0-40.44-generic 5.4.44)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
  zhaoxin   Shanghai  
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009e01fff] usable
BIOS-e820: [mem 0x0000000009e02000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000db877fff] usable
BIOS-e820: [mem 0x00000000db878000-0x00000000db9cbfff] reserved
BIOS-e820: [mem 0x00000000db9cc000-0x00000000dbb57fff] usable
BIOS-e820: [mem 0x00000000dbb58000-0x00000000dbf94fff] ACPI NVS
BIOS-e820: [mem 0x00000000dbf95000-0x00000000dcbb0fff] reserved
BIOS-e820: [mem 0x00000000dcbb1000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021f37ffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.2.0 present.
DMI: Gigabyte Technology Co., Ltd. AB350M-DS3H/AB350M-DS3H-CF, BIOS F40 06/14/2019
tsc: Fast TSC calibration failed
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x21f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFE0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000220000000 aka 8704M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x66001000, 0x66001fff] PGTABLE
BRK [0x66002000, 0x66002fff] PGTABLE
BRK [0x66003000, 0x66003fff] PGTABLE
BRK [0x66004000, 0x66004fff] PGTABLE
BRK [0x66005000, 0x66005fff] PGTABLE
BRK [0x66006000, 0x66006fff] PGTABLE
BRK [0x66007000, 0x66007fff] PGTABLE
BRK [0x66008000, 0x66008fff] PGTABLE
BRK [0x66009000, 0x66009fff] PGTABLE
BRK [0x6600a000, 0x6600afff] PGTABLE
RAMDISK: [mem 0x2e0c5000-0x33059fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05A0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DBF100A0 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000DBF16D18 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000DBF10200 006B14 (v02 ALASKA A M I    01072009 INTL 20160930)
ACPI: FACS 0x00000000DBF7CE00 000040
ACPI: APIC 0x00000000DBF16E30 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000DBF16F90 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x00000000DBF16FD8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000DBF17078 0000C8 (v02 ALASKA A M I    01072009 AMI  01072009)
ACPI: SSDT 0x00000000DBF17140 008C98 (v02 ALASKA A M I    00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DBF1FDD8 003202 (v01 ALASKA A M I    00000001 INTL 20160930)
ACPI: MCFG 0x00000000DBF22FE0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: SSDT 0x00000000DBF23020 006466 (v01 ALASKA A M I    00000001 INTL 20160930)
ACPI: HPET 0x00000000DBF29488 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: SSDT 0x00000000DBF294C0 000024 (v01 ALASKA A M I    00001000 INTL 20160930)
ACPI: UEFI 0x00000000DBF294E8 000042 (v01 ALASKA A M I    00000002      01000013)
ACPI: IVRS 0x00000000DBF29530 0000D0 (v02 ALASKA A M I    00000001 AMD  00000000)
ACPI: SSDT 0x00000000DBF29600 001A58 (v01 ALASKA A M I    00000001 AMD  00000001)
ACPI: CRAT 0x00000000DBF2B058 000BD0 (v01 ALASKA A M I    00000001 AMD  00000001)
ACPI: CDIT 0x00000000DBF2BC28 000029 (v01 ALASKA A M I    00000001 AMD  00000001)
ACPI: SSDT 0x00000000DBF2BC58 001EC3 (v01 ALASKA A M I    00000001 INTL 20160930)
ACPI: SSDT 0x00000000DBF2DB20 0000BF (v01 ALASKA A M I    00001000 INTL 20160930)
ACPI: WSMT 0x00000000DBF2DBE0 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000DBF2DC08 0013F0 (v01 ALASKA A M I    00000001 INTL 20160930)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021f37ffff]
NODE_DATA(0) allocated [mem 0x21f355000-0x21f37ffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000021f37ffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009cfff]
  node   0: [mem 0x0000000000100000-0x0000000009e01fff]
  node   0: [mem 0x000000000a000000-0x000000000a1fffff]
  node   0: [mem 0x000000000a20b000-0x000000000affffff]
  node   0: [mem 0x000000000b020000-0x00000000db877fff]
  node   0: [mem 0x00000000db9cc000-0x00000000dbb57fff]
  node   0: [mem 0x00000000dcbb1000-0x00000000deffffff]
  node   0: [mem 0x0000000100000000-0x000000021f37ffff]
Zeroed struct page in unavailable ranges: 12474 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000021f37ffff]
On node 0 totalpages: 2084678
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 14129 pages used for memmap
  DMA32 zone: 904234 pages, LIFO batch:63
  Normal zone: 18382 pages used for memmap
  Normal zone: 1176448 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 32 CPUs, 20 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09e02000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: Registered nosave memory: [mem 0xdb878000-0xdb9cbfff]
PM: Registered nosave memory: [mem 0xdbb58000-0xdbf94fff]
PM: Registered nosave memory: [mem 0xdbf95000-0xdcbb0fff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
Built 1 zonelists, mobility grouping on.  Total pages: 2052082
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8007872K/8338712K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 330840K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 44488 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
	Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3592.862 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33c9fc223e4, max_idle_ns: 440795330167 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7185.72 BogoMIPS (lpj=14371448)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Vulnerable
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Ryzen 5 1600X Six-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 3
smpboot: Total of 12 processors activated (86228.68 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
PM: Registering ACPI NVS region [mem 0xdbb58000-0xdbf94fff] (4444160 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 02:34:28, date: 2020-06-27
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1593225268.176:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [mem 0x21f380000-0x7fffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: enabling Extended Tags
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:01:00.0: [1022:43b9] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.1: [1022:43b5] type 00 class 0x010601
pci 0000:01:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff]
pci 0000:01:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:01:00.1: PME# supported from D3hot D3cold
pci 0000:01:00.2: [1022:43b0] type 01 class 0x060400
pci 0000:01:00.2: enabling Extended Tags
pci 0000:01:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 01-07]
pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
pci 0000:00:01.3:   bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:00:01.3:   bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref]
pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:01.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:01.0: enabling Extended Tags
pci 0000:02:01.0: PME# supported from D3hot D3cold
pci 0000:02:02.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:02.0: enabling Extended Tags
pci 0000:02:02.0: PME# supported from D3hot D3cold
pci 0000:02:03.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:03.0: enabling Extended Tags
pci 0000:02:03.0: PME# supported from D3hot D3cold
pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:04.0: enabling Extended Tags
pci 0000:02:04.0: PME# supported from D3hot D3cold
pci 0000:01:00.2: PCI bridge to [bus 02-07]
pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
pci 0000:01:00.2:   bridge window [mem 0xfcc00000-0xfccfffff]
pci 0000:01:00.2:   bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io  0xf000-0xf0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xfcc00000-0xfcc00fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0x7ffff00000-0x7ffff03fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:01.0:   bridge window [io  0xf000-0xffff]
pci 0000:02:01.0:   bridge window [mem 0xfcc00000-0xfccfffff]
pci 0000:02:01.0:   bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref]
pci 0000:02:02.0: PCI bridge to [bus 05]
pci 0000:02:03.0: PCI bridge to [bus 06]
pci 0000:02:04.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [1002:6939] type 00 class 0x030000
pci 0000:08:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:08:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:08:00.0: reg 0x20: [io  0xe000-0xe0ff]
pci 0000:08:00.0: reg 0x24: [mem 0xfcf00000-0xfcf3ffff]
pci 0000:08:00.0: reg 0x30: [mem 0xfcf40000-0xfcf5ffff pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:08:00.1: [1002:aad8] type 00 class 0x040300
pci 0000:08:00.1: reg 0x10: [mem 0xfcf60000-0xfcf63fff 64bit]
pci 0000:08:00.1: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 08]
pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.1:   bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:09:00.0: [1022:145a] type 00 class 0x130000
pci 0000:09:00.0: enabling Extended Tags
pci 0000:09:00.2: [1022:1456] type 00 class 0x108000
pci 0000:09:00.2: reg 0x18: [mem 0xfca00000-0xfcafffff]
pci 0000:09:00.2: reg 0x24: [mem 0xfcb00000-0xfcb01fff]
pci 0000:09:00.2: enabling Extended Tags
pci 0000:09:00.3: [1022:145c] type 00 class 0x0c0330
pci 0000:09:00.3: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit]
pci 0000:09:00.3: enabling Extended Tags
pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 09]
pci 0000:00:07.1:   bridge window [mem 0xfc900000-0xfcbfffff]
pci 0000:0a:00.0: [1022:1455] type 00 class 0x130000
pci 0000:0a:00.0: enabling Extended Tags
pci 0000:0a:00.2: [1022:7901] type 00 class 0x010601
pci 0000:0a:00.2: reg 0x24: [mem 0xfce00000-0xfce00fff]
pci 0000:0a:00.2: enabling Extended Tags
pci 0000:0a:00.2: PME# supported from D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0a]
pci 0000:00:08.1:   bridge window [mem 0xfce00000-0xfcefffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
iommu: Default domain type: Translated 
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:08:00.0: vgaarb: setting as boot VGA device
pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:08:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x09e02000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0xdb878000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbb58000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f380000-0x21fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x0a00-0x0a2f] has been reserved
system 00:02: [io  0x0a30-0x0a3f] has been reserved
system 00:02: [io  0x0a40-0x0a4f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: [io  0x040b] has been reserved
system 00:04: [io  0x04d6] has been reserved
system 00:04: [io  0x0c00-0x0c01] has been reserved
system 00:04: [io  0x0c14] has been reserved
system 00:04: [io  0x0c50-0x0c51] has been reserved
system 00:04: [io  0x0c52] has been reserved
system 00:04: [io  0x0c6c] has been reserved
system 00:04: [io  0x0c6f] has been reserved
system 00:04: [io  0x0cd0-0x0cd1] has been reserved
system 00:04: [io  0x0cd2-0x0cd3] has been reserved
system 00:04: [io  0x0cd4-0x0cd5] has been reserved
system 00:04: [io  0x0cd6-0x0cd7] has been reserved
system 00:04: [io  0x0cd8-0x0cdf] has been reserved
system 00:04: [io  0x0800-0x089f] has been reserved
system 00:04: [io  0x0b00-0x0b0f] has been reserved
system 00:04: [io  0x0b20-0x0b3f] has been reserved
system 00:04: [io  0x0900-0x090f] has been reserved
system 00:04: [io  0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:01.0:   bridge window [io  0xf000-0xffff]
pci 0000:02:01.0:   bridge window [mem 0xfcc00000-0xfccfffff]
pci 0000:02:01.0:   bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref]
pci 0000:02:02.0: PCI bridge to [bus 05]
pci 0000:02:03.0: PCI bridge to [bus 06]
pci 0000:02:04.0: PCI bridge to [bus 07]
pci 0000:01:00.2: PCI bridge to [bus 02-07]
pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
pci 0000:01:00.2:   bridge window [mem 0xfcc00000-0xfccfffff]
pci 0000:01:00.2:   bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref]
pci 0000:00:01.3: PCI bridge to [bus 01-07]
pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
pci 0000:00:01.3:   bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:00:01.3:   bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 08]
pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.1:   bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 09]
pci 0000:00:07.1:   bridge window [mem 0xfc900000-0xfcbfffff]
pci 0000:00:08.1: PCI bridge to [bus 0a]
pci 0000:00:08.1:   bridge window [mem 0xfce00000-0xfcefffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: resource 12 [mem 0x21f380000-0x7fffffffff window]
pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xfcc00000-0xfcdfffff]
pci_bus 0000:01: resource 2 [mem 0x7ffff00000-0x7fffffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xfcc00000-0xfccfffff]
pci_bus 0000:02: resource 2 [mem 0x7ffff00000-0x7fffffffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xf000-0xffff]
pci_bus 0000:04: resource 1 [mem 0xfcc00000-0xfccfffff]
pci_bus 0000:04: resource 2 [mem 0x7ffff00000-0x7fffffffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:08: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xfc900000-0xfcbfffff]
pci_bus 0000:0a: resource 1 [mem 0xfce00000-0xfcefffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:08:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:08:00.1: D0 power state depends on 0000:08:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 81492K
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.3: Adding to iommu group 1
pci 0000:00:02.0: Adding to iommu group 2
pci 0000:00:03.0: Adding to iommu group 3
pci 0000:00:03.1: Adding to iommu group 4
pci 0000:00:04.0: Adding to iommu group 5
pci 0000:00:07.0: Adding to iommu group 6
pci 0000:00:07.1: Adding to iommu group 7
pci 0000:00:08.0: Adding to iommu group 8
pci 0000:00:08.1: Adding to iommu group 9
pci 0000:00:14.0: Adding to iommu group 10
pci 0000:00:14.3: Adding to iommu group 10
pci 0000:00:18.0: Adding to iommu group 11
pci 0000:00:18.1: Adding to iommu group 11
pci 0000:00:18.2: Adding to iommu group 11
pci 0000:00:18.3: Adding to iommu group 11
pci 0000:00:18.4: Adding to iommu group 11
pci 0000:00:18.5: Adding to iommu group 11
pci 0000:00:18.6: Adding to iommu group 11
pci 0000:00:18.7: Adding to iommu group 11
pci 0000:01:00.0: Adding to iommu group 12
pci 0000:01:00.1: Adding to iommu group 12
pci 0000:01:00.2: Adding to iommu group 12
pci 0000:02:00.0: Adding to iommu group 12
pci 0000:02:01.0: Adding to iommu group 12
pci 0000:02:02.0: Adding to iommu group 12
pci 0000:02:03.0: Adding to iommu group 12
pci 0000:02:04.0: Adding to iommu group 12
pci 0000:04:00.0: Adding to iommu group 12
pci 0000:08:00.0: Adding to iommu group 13
pci 0000:08:00.0: Using iommu direct mapping
pci 0000:08:00.1: Adding to iommu group 13
pci 0000:09:00.0: Adding to iommu group 14
pci 0000:09:00.2: Adding to iommu group 15
pci 0000:09:00.3: Adding to iommu group 16
pci 0000:0a:00.0: Adding to iommu group 17
pci 0000:0a:00.2: Adding to iommu group 18
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0xf77ef22294ada):
 PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.3: PME: Signaling with IRQ 26
pcieport 0000:00:01.3: AER: enabled with IRQ 26
pcieport 0000:00:03.1: PME: Signaling with IRQ 27
pcieport 0000:00:03.1: AER: enabled with IRQ 27
pcieport 0000:00:07.1: PME: Signaling with IRQ 28
pcieport 0000:00:07.1: AER: enabled with IRQ 28
pcieport 0000:00:08.1: PME: Signaling with IRQ 30
pcieport 0000:00:08.1: AER: enabled with IRQ 30
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 1360x768x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0x000000002fc65f07, using 4224k, total 4224k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
tsc: Refined TSC clocksource calibration: 3593.249 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb698e952, max_idle_ns: 440795267109 ns
clocksource: Switched to clocksource tsc
ACPI: Invalid passive threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ10] (17 C)
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000008000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-40-generic xhci-hcd
usb usb1: SerialNumber: 0000:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-40-generic xhci-hcd
usb usb2: SerialNumber: 0000:01:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:09:00.3: xHCI Host Controller
xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:09:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000040000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-40-generic xhci-hcd
usb usb3: SerialNumber: 0000:09:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:09:00.3: xHCI Host Controller
xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:09:00.3: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-40-generic xhci-hcd
usb usb4: SerialNumber: 0000:09:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08001138
microcode: CPU1: patch_level=0x08001138
microcode: CPU2: patch_level=0x08001138
microcode: CPU3: patch_level=0x08001138
microcode: CPU4: patch_level=0x08001138
microcode: CPU5: patch_level=0x08001138
microcode: CPU6: patch_level=0x08001138
microcode: CPU7: patch_level=0x08001138
microcode: CPU8: patch_level=0x08001138
microcode: CPU9: patch_level=0x08001138
microcode: CPU10: patch_level=0x08001138
microcode: CPU11: patch_level=0x08001138
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (2551283764, -31995541)->(2531941265, -12653042)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: c7397aba4b613cce0e4070f289f6e01155c15620'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 8:268:562
pci_express 0000:02:02.0:pcie202: hash matches
rtc_cmos 00:01: setting system clock to 2020-06-27T02:34:30 UTC (1593225270)
acpi_cpufreq: overriding BIOS provided _PSD data
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1192K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
ahci 0000:01:00.1: version 3.0
ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
scsi host0: ahci
scsi host1: ahci
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
scsi host2: ahci
scsi host3: ahci
cryptd: max_cpu_qlen set to 1000
amdkcl: loading out-of-tree module taints kernel.
amdkcl: module verification failed: signature and/or required key missing - tainting kernel
scsi host4: ahci
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 43
ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 43
ata3: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80200 irq 43
ata4: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80280 irq 43
ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 43
ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 43
ata7: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80400 irq 43
ata8: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80480 irq 43
ahci 0000:0a:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0a:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
scsi host8: ahci
ata9: SATA max UDMA/133 abar m4096@0xfce00000 port 0xfce00100 irq 46
libphy: r8169: probed
r8169 0000:04:00.0 eth0: RTL8168g/8111g, e0:d5:5e:63:71:17, XID 4c0, IRQ 44
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 0000:04:00.0 enp4s0: renamed from eth0
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel 
[drm] amdgpu kernel modesetting enabled.
[drm] amdgpu version: 5.6.0.20.20
[drm] OS DRM version: 5.4.0
amdgpu: Ignoring ACPI CRAT on non-APU system
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfcf00000 -> 0xfcf3ffff
checking generic (e0000000 420000) vs hw (e0000000 10000000)
fb0: switching to amdgpudrmfb from VESA VGA
amdgpu 0000:08:00.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (TONGA 0x1002:0x6939 0x1682:0x9380 0xF1).
amdgpu 0000:08:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[drm] register mmio base: 0xFCF00000
[drm] register mmio size: 262144
[drm] add ip block number 0 
[drm] add ip block number 1 
[drm] add ip block number 2 
[drm] add ip block number 3 
[drm] add ip block number 4 
[drm] add ip block number 5 
[drm] add ip block number 6 
[drm] add ip block number 7 
[drm] add ip block number 8 
amdgpu 0000:08:00.0: No more image in the PCI ROM
amdgpu: ATOM BIOS: 113-380PEDF74-W80
[drm] VCE enabled in physical mode
[drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
amdgpu 0000:08:00.0: BAR 2: releasing [mem 0xf0000000-0xf01fffff 64bit pref]
amdgpu 0000:08:00.0: BAR 0: releasing [mem 0xe0000000-0xefffffff 64bit pref]
pcieport 0000:00:03.1: BAR 15: releasing [mem 0xe0000000-0xf01fffff 64bit pref]
pcieport 0000:00:03.1: BAR 15: assigned [mem 0x280000000-0x3ffffffff 64bit pref]
amdgpu 0000:08:00.0: BAR 0: assigned [mem 0x300000000-0x3ffffffff 64bit pref]
amdgpu 0000:08:00.0: BAR 2: assigned [mem 0x280000000-0x2801fffff 64bit pref]
pcieport 0000:00:03.1: PCI bridge to [bus 08]
pcieport 0000:00:03.1:   bridge window [io  0xe000-0xefff]
pcieport 0000:00:03.1:   bridge window [mem 0xfcf00000-0xfcffffff]
pcieport 0000:00:03.1:   bridge window [mem 0x280000000-0x3ffffffff 64bit pref]
amdgpu 0000:08:00.0: amdgpu: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:08:00.0: amdgpu: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=4096M
[drm] RAM width 256bits GDDR5
[TTM] Zone  kernel: Available graphics memory: 4081638 KiB
[TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 7971M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F4003FC000).
[drm] Chained IB support enabled!
amdgpu: [powerplay] hwmgr_sw_init smu backed is tonga_smu
[drm] Found UVD firmware Version: 1.68 Family ID: 10
[drm] Found VCE firmware Version: 52.8 Binary ID: 3
[drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[drm] Display Core initialized with v3.2.81!
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
usb 1-4: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new low-speed USB device number 2 using xhci_hcd
[drm] UVD initialized successfully.
ata9: SATA link down (SStatus 0 SControl 300)
usb 1-4: New USB device found, idVendor=0bda, idProduct=8812, bcdDevice= 0.00
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: 802.11n NIC
usb 1-4: Manufacturer: Realtek
usb 1-4: SerialNumber: 123456
usb 3-1: New USB device found, idVendor=045e, idProduct=00db, bcdDevice= 1.73
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Natural® Ergonomic Keyboard 4000
usb 3-1: Manufacturer: Microsoft
[drm] VCE initialized successfully.
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
amdgpu: SW scheduler is used
amdgpu: Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x6939:0x1002]
kfd kfd: amdgpu: added device 1002:6939
amdgpu 0000:08:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 8, active_cu_number 28
[drm] fb mappable at 0x300929000
[drm] vram apper at 0x300000000
[drm] size 4325376
[drm] fb depth is 24
[drm]    pitch is 5632
fbcon: amdgpudrmfb (fb0) is primary device
fbcon: Deferring console take-over
amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.37.0 20150101 for 0000:08:00.0 on minor 0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-11: SanDisk SDSSDH31024G, X6104000, max UDMA/133
ata1.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDH31 4000 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-2: new full-speed USB device number 3 using xhci_hcd
usb 3-2: New USB device found, idVendor=1d57, idProduct=ad17, bcdDevice= 1.07
usb 3-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 3-2: Product: Gaming Mouse
usb 3-2: Manufacturer: LXD
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: LXD Gaming Mouse as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-2/3-2:1.0/0003:1D57:AD17.0003/input/input2
hid-generic 0003:1D57:AD17.0003: input,hidraw0: USB HID v1.10 Mouse [LXD Gaming Mouse] on usb-0000:09:00.3-2/input0
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.0/0003:045E:00DB.0001/input/input3
microsoft 0003:045E:00DB.0001: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:09:00.3-1/input0
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:045E:00DB.0002/input/input4
microsoft 0003:045E:00DB.0002: input,hidraw2: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:09:00.3-1/input1
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-11: SanDisk SDSSDA-2T00, 411040RL, max UDMA/133
ata2.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      SanDisk SDSSDA-2 40RL PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3: failed to resume link (SControl 0)
ata3: SATA link down (SStatus 0 SControl 0)
ata4: failed to resume link (SControl 0)
ata4: SATA link down (SStatus 0 SControl 0)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN00, max UDMA/133
ata6.00: configured for UDMA/133
scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NS95  RN00 PQ: 0 ANSI: 5
sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg2 type 5
ata7: failed to resume link (SControl 0)
ata7: SATA link down (SStatus 0 SControl 0)
ata8: failed to resume link (SControl 0)
ata8: SATA link down (SStatus 0 SControl 0)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting Mount unit for core18, revision 1754...
systemd[1]: Mounting Mount unit for snapd, revision 8140...
systemd[1]: Mounting Mount unit for vlc, revision 1700...
systemd[1]: Finished udev Coldplug all Devices.
Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
systemd[1]: Activated swap /swapfile.
systemd[1]: Reached target Swap.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: plymouth-start.service: Succeeded.
systemd[1]: Started Show Plymouth Boot Screen.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Mounted Mount unit for snapd, revision 8140.
systemd[1]: Mounted Mount unit for core18, revision 1754.
systemd[1]: Mounted Mount unit for vlc, revision 1700.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Load AppArmor profiles...
systemd[1]: Starting Set console font and keymap...
systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
systemd[1]: Finished Set console font and keymap.
systemd[1]: Received SIGRTMIN+20 from PID 440 (plymouthd).
systemd[1]: plymouth-read-write.service: Succeeded.
systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.
audit: type=1400 audit(1593225277.652:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=604 comm="apparmor_parser"
audit: type=1400 audit(1593225277.652:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=608 comm="apparmor_parser"
audit: type=1400 audit(1593225277.652:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=601 comm="apparmor_parser"
audit: type=1400 audit(1593225277.652:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=609 comm="apparmor_parser"
audit: type=1400 audit(1593225277.652:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=609 comm="apparmor_parser"
audit: type=1400 audit(1593225277.656:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=606 comm="apparmor_parser"
audit: type=1400 audit(1593225277.656:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=606 comm="apparmor_parser"
audit: type=1400 audit(1593225277.656:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=610 comm="apparmor_parser"
audit: type=1400 audit(1593225277.656:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=607 comm="apparmor_parser"
audit: type=1400 audit(1593225277.656:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=611 comm="apparmor_parser"
systemd[1]: Finished Load AppArmor profiles.
ccp 0000:09:00.2: ccp enabled
systemd[1]: Starting Load AppArmor profiles managed internally by snapd...
systemd[1]: Finished Load AppArmor profiles managed internally by snapd.
cfg80211: Loading compiled-in X.509 certificates for regulatory database
systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
kvm: disabled by bios
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
8812au: version magic '5.4.0-39-generic SMP mod_unload ' should be '5.4.0-40-generic SMP mod_unload '
systemd[1]: Started Journal Service.
systemd-journald[509]: Received client request to flush runtime journal.
kvm: disabled by bios
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
snd_hda_intel 0000:08:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:08:00.1: Force to non-snoop mode
snd_hda_intel 0000:08:00.1: bound 0000:08:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input5
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input6
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input7
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input8
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input9
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input10
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
Generic FE-GE Realtek PHY r8169-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
r8169 0000:04:00.0 enp4s0: Link is Down
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
usb 1-4: 88XXau 00:c0:ca:ab:a5:3d hw_info[d7]
usbcore: registered new interface driver rtl88XXau
rtl88XXau 1-4:1.0 wlx00c0caaba53d: renamed from wlan0
IPv6: ADDRCONF(NETDEV_CHANGE): wlx00c0caaba53d: link becomes ready
------------[ cut here ]------------
Modules linked in: snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi edac_mce_amd snd_seq 88XXau(OE) snd_seq_device snd_timer input_leds kvm cfg80211 joydev wmi_bmof k10temp snd ccp soundcore mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_microsoft ff_memless hid_generic usbhid hid amdgpu(OE) crct10dif_pclmul crc32_pclmul amd_iommu_v2 amd_sched(OE) ghash_clmulni_intel amdttm(OE) amdkcl(OE) aesni_intel i2c_algo_bit drm_kms_helper crypto_simd syscopyarea sysfillrect cryptd sysimgblt glue_helper fb_sys_fops drm i2c_piix4 r8169 ahci realtek libahci wmi gpio_amdpt gpio_generic
CPU: 8 PID: 1454 Comm: RTW_CMD_THREAD Tainted: G           OE     5.4.0-40-generic #44-Ubuntu
Hardware name: Gigabyte Technology Co., Ltd. AB350M-DS3H/AB350M-DS3H-CF, BIOS F40 06/14/2019
RIP: 0010:nl80211_send_chandef+0x142/0x160 [cfg80211]
Code: 4d dc ba 04 00 00 00 4c 89 e7 89 45 dc be a1 00 00 00 e8 a1 b3 d0 c1 85 c0 74 82 41 bd 97 ff ff ff e9 77 ff ff ff 31 c0 eb af  0b 41 bd ea ff ff ff e9 66 ff ff ff e8 ec 73 85 c1 66 66 2e 0f
RSP: 0018:ffffb14641f77d10 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffb14641f77de8 RCX: 0000000000000046
RDX: 00000000406297ec RSI: 00000000ffff32b5 RDI: ffffb14641f77de8
RBP: ffffb14641f77d38 R08: 0000000000000000 R09: ffff9f0f4c8ca01c
R10: 0000000000000000 R11: 000000000000001e R12: ffff9f0f4576d500
R13: ffffb14641f77de8 R14: ffff9f0f4576d500 R15: ffff9f0f4c8ca014
FS:  0000000000000000(0000) GS:ffff9f0f56a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0df40051a8 CR3: 0000000207b92000 CR4: 00000000003406e0
Call Trace:
 ? __nla_put+0x20/0x30
 nl80211_ch_switch_notify.constprop.0+0xcf/0x170 [cfg80211]
 cfg80211_ch_switch_started_notify+0x51/0xa0 [cfg80211]
 rtw_cfg80211_ch_switch_notify+0x132/0x141 [88XXau]
 rtw_chk_start_clnt_join+0x76/0x80 [88XXau]
 join_cmd_hdl+0x26e/0x36f [88XXau]
 ? rtw_chk_start_clnt_join+0x80/0x80 [88XXau]
 rtw_cmd_thread+0x2b2/0x407 [88XXau]
 kthread+0x104/0x140
 ? rtw_stop_cmd_thread+0x3e/0x3e [88XXau]
 ? kthread_park+0x90/0x90
 ret_from_fork+0x22/0x40
---[ end trace 737e2118500b4d59 ]---
IPv6: ADDRCONF(NETDEV_CHANGE): wlx00c0caaba53d: link becomes ready

Return To testin1 System Information