dmesg - debian-paraview
microcode: microcode updated early to revision 0x2e, date = 2019-06-13
Linux version 5.6.4-xanmod1 (root@mascote) (gcc version 9.3.0 (Debian 9.3.0-10)) #0 SMP PREEMPT Mon Apr 13 13:36:55 -03 2020
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bc039fff] usable
BIOS-e820: [mem 0x00000000bc03a000-0x00000000bc4c4fff] reserved
BIOS-e820: [mem 0x00000000bc4c5000-0x00000000d95aefff] usable
BIOS-e820: [mem 0x00000000d95af000-0x00000000d96eafff] reserved
BIOS-e820: [mem 0x00000000d96eb000-0x00000000d971bfff] ACPI data
BIOS-e820: [mem 0x00000000d971c000-0x00000000da1b1fff] usable
BIOS-e820: [mem 0x00000000da1b2000-0x00000000da610fff] ACPI NVS
BIOS-e820: [mem 0x00000000da611000-0x00000000dba54fff] reserved
BIOS-e820: [mem 0x00000000dba55000-0x00000000dbafefff] type 20
BIOS-e820: [mem 0x00000000dbaff000-0x00000000dbafffff] usable
BIOS-e820: [mem 0x00000000dd000000-0x00000000df7fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021e7fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xd96f9000 ACPI 2.0=0xd96f9000 SMBIOS=0xf0000
SMBIOS 2.8 present.
DMI: Dell Inc. Latitude E5450/09X6YN, BIOS A20 10/23/2018
tsc: Fast TSC calibration using PIT
tsc: Detected 2593.929 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x21e800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FF0000000 write-back
2 base 0210000000 mask 7FF8000000 write-back
3 base 0218000000 mask 7FFC000000 write-back
4 base 021C000000 mask 7FFE000000 write-back
5 base 021E000000 mask 7FFF800000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 base 00DE000000 mask 7FFE000000 uncachable
8 base 00DD000000 mask 7FFF000000 uncachable
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 8120M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 9 lose cover RAM: 0G
e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
last_pfn = 0xdbb00 max_arch_pfn = 0x400000000
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0xc5801000, 0xc5801fff] PGTABLE
BRK [0xc5802000, 0xc5802fff] PGTABLE
BRK [0xc5803000, 0xc5803fff] PGTABLE
BRK [0xc5804000, 0xc5804fff] PGTABLE
BRK [0xc5805000, 0xc5805fff] PGTABLE
BRK [0xc5806000, 0xc5806fff] PGTABLE
BRK [0xc5807000, 0xc5807fff] PGTABLE
BRK [0xc5808000, 0xc5808fff] PGTABLE
BRK [0xc5809000, 0xc5809fff] PGTABLE
BRK [0xc580a000, 0xc580afff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x3085d000-0x34425fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000D96F9000 000024 (v02 DELL )
ACPI: XSDT 0x00000000D96F90A8 0000D4 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x00000000D970DA80 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x00000000D96F9210 01486E (v02 DELL CBX3 01072009 INTL 20120913)
ACPI: FACS 0x00000000DA60FF80 000040
ACPI: APIC 0x00000000D970DB90 000084 (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x00000000D970DC18 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FIDT 0x00000000D970DC60 00009C (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x00000000D970DD00 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: HPET 0x00000000D970DD40 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000D970DD78 0004B5 (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: UEFI 0x00000000D970E230 000042 (v01 00000000 00000000)
ACPI: SSDT 0x00000000D970E278 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
ACPI: ASF! 0x00000000D970EEF8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: SSDT 0x00000000D970EF98 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: SSDT 0x00000000D970F4B8 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: SSDT 0x00000000D9710030 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913)
ACPI: SSDT 0x00000000D97101F8 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
ACPI: PCCT 0x00000000D97105A0 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
ACPI: SSDT 0x00000000D9710610 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
ACPI: SSDT 0x00000000D97110D8 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: SSDT 0x00000000D9715288 004508 (v01 DptfTa DptfTabl 00001000 INTL 20120913)
ACPI: SLIC 0x00000000D9719790 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: MSDM 0x00000000D9719908 000055 (v03 DELL CBX3 06222004 AMI 00010013)
ACPI: DMAR 0x00000000D9719960 0000B0 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: BGRT 0x00000000D9719A10 000038 (v00 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021e7fffff]
NODE_DATA(0) allocated [mem 0x21e7d3000-0x21e7fcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021e7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000bc039fff]
node 0: [mem 0x00000000bc4c5000-0x00000000d95aefff]
node 0: [mem 0x00000000d971c000-0x00000000da1b1fff]
node 0: [mem 0x00000000dbaff000-0x00000000dbafffff]
node 0: [mem 0x0000000100000000-0x000000021e7fffff]
Zeroed struct page in unavailable ranges: 31913 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000021e7fffff]
On node 0 totalpages: 2065239
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13871 pages used for memmap
DMA32 zone: 887739 pages, LIFO batch:63
Normal zone: 18336 pages used for memmap
Normal zone: 1173504 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0xdd800000-0xdf7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] low res lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl res lint[0x89])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x03] dfl edge lint[0xb9])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x04] high dfl lint[0xf])
ACPI: NMI not connected to LINT 1!
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
e820: update [mem 0xd5edb000-0xd5f5ffff] usable ==> reserved
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xbc03a000-0xbc4c4fff]
PM: hibernation: Registered nosave memory: [mem 0xd5edb000-0xd5f5ffff]
PM: hibernation: Registered nosave memory: [mem 0xd95af000-0xd96eafff]
PM: hibernation: Registered nosave memory: [mem 0xd96eb000-0xd971bfff]
PM: hibernation: Registered nosave memory: [mem 0xda1b2000-0xda610fff]
PM: hibernation: Registered nosave memory: [mem 0xda611000-0xdba54fff]
PM: hibernation: Registered nosave memory: [mem 0xdba55000-0xdbafefff]
PM: hibernation: Registered nosave memory: [mem 0xdbb00000-0xdcffffff]
PM: hibernation: Registered nosave memory: [mem 0xdd000000-0xdf7fffff]
PM: hibernation: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3821924579961850 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u524288
pcpu-alloc: s196608 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 2032946
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 7868532K/8260956K available (14339K kernel code, 2562K rwdata, 5000K rodata, 2496K init, 4884K bss, 392424K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x3e/0x520 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44968 entries in 176 pages
ftrace: allocated 176 pages with 3 groups
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
rcu: RCU priority boosting: priority 1 delay 0 ms.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 50 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200110
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
DMAR: RMRR base: 0x000000db9ad000 end: 0x000000db9bbfff
DMAR: RMRR base: 0x000000dd000000 end: 0x000000df7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2563d51119f, max_idle_ns: 440795282150 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.85 BogoMIPS (lpj=5187858)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
TAA: Mitigation: Clear CPU buffers
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (family: 0x6, model: 0x3d, stepping: 0x4)
Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2
MDS CPU bug present and SMT on, data leak possible. See for more details.
TAA CPU bug present and SMT on, data leak possible. See for more details.
#3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (20751.43 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xda1b2000-0xda610fff] (4583424 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520892550000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 01:34:11, date: 2020-05-14
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1589420051.120:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9CB794D00000 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9CB794A41800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9CB794813E00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x27, IRQ=-1, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:02.0: DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf723c000-0xf723ffff 64bit]
pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xf7230000-0xf7237fff 64bit]
pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7220000-0xf722ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7246000-0xf724601f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7200000-0xf721ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7243000-0xf7243fff]
pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7238000-0xf723bfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7242000-0xf72423ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7241000-0xf72417ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7240000-0xf72400ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [1217:8520] type 00 class 0x080501
pci 0000:01:00.0: reg 0x10: [mem 0xf7101000-0xf7101fff]
pci 0000:01:00.0: reg 0x14: [mem 0xf7100000-0xf71007ff]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
pci 0000:00:1c.4: PCI bridge to [bus 03]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x27, IRQ=-1, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions and events
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbc03a000-0xbfffffff]
e820: reserve RAM buffer [mem 0xd5edb000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd95af000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda1b2000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbb00000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21e800000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs DLL062b PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (disabled)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0xdf800000-0xfeafffff window]
pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff]
pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x645 took 16931 usecs
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 61220K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xd146d000-0xd546d000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuseblk ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:1c.0: PME: Signaling with IRQ 42
pcieport 0000:00:1c.3: PME: Signaling with IRQ 43
pcieport 0000:00:1c.4: PME: Signaling with IRQ 44
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xe0000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x3D
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ01] (30 C)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7242000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.6.4-xanmod1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.6.4-xanmod1 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 11 ports detected
battery: ACPI: Battery Slot [BAT0] (battery present)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.6.4-xanmod1 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x306d4, pf=0x40, revision=0x2e
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1112639672, 214276)->(1118886060, -6032112)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: d3cea0633864b1b71ae7d2b3b96e43b8b5a8b6ff'
zswap: loaded using pool lz4/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 4:178:559
tty ttyS31: hash matches
rtc_cmos 00:01: setting system clock to 2020-05-14T01:34:12 UTC (1589420052)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2496K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 1144K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.6.4-xanmod1
i801_smbus 0000:00:1f.3: PCI INT C: failed to register GSI
i801_smbus 0000:00:1f.3: Failed to enable SMBus PCI device (-16)
fbcon: Taking over console
i801_smbus: probe of 0000:00:1f.3 failed with error -16
Console: switching to colour frame buffer device 240x67
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: enabling device (0000 -> 0002)
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7241000 port 0xf7241100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xf7241000 port 0xf7241180 irq 47
sdhci-pci 0000:01:00.0: SDHCI controller found [1217:8520] (rev 1)
mmc0: SDHCI controller on PCI [0000:01:00.0] using ADMA
checking generic (e0000000 7f0000) vs hw (f6000000 1000000)
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] ACPI BIOS requests an excessive sleep of 20000 ms, using 1500 ms instead
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-1: new high-speed USB device number 2 using ehci-pci
[drm] Initialized i915 1.6.0 20200114 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
fbcon: i915drmfb (fb0) is primary device
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 20:47:47:d4:fd:97
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 eno1: renamed from eth0
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
usb 1-1.3: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1.6: new high-speed USB device number 4 using ehci-pci
usb 1-1.6: New USB device found, idVendor=0c45, idProduct=6709, bcdDevice=48.06
usb 1-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1.6: Product: Integrated_Webcam_HD
usb 1-1.6: Manufacturer: CN0FHKK772487587FC1FA00
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: Enabling discard_zeroes_data
sda: sda1 sda2 sda3 sda4 sda5
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sda] supports TCG Opal
sd 1:0:0:0: [sda] Attached SCSI disk
usb 1-1.7: new full-speed USB device number 5 using ehci-pci
tsc: Refined TSC clocksource calibration: 2593.998 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2564164249b, max_idle_ns: 440795293190 ns
clocksource: Switched to clocksource tsc
usb 1-1.7: New USB device found, idVendor=0a5c, idProduct=5800, bcdDevice= 1.01
usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.7: Product: 5880
usb 1-1.7: Manufacturer: Broadcom Corp
usb 1-1.7: SerialNumber: 0123456789ABCD
usb 1-1.7: config 0 descriptor??
input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input8
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
process '/usr/bin/fstype' started with executable stack
PM: Image not found (code -22)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.5-2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-postgresql.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Libvirt guests shutdown.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Mounted Kernel Configuration File System.
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
systemd[1]: Reached target Containers.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Starting Helper to synchronize boot up for ifupdown...
systemd[1]: Finished Helper to synchronize boot up for ifupdown.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: Started Show Plymouth Boot Screen.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Paths.
input: DELL Wireless hotkeys as /devices/virtual/input/input9
parport_pc 00:05: [io 0x0378-0x037b]
ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20200110/nspredef-258)
ACPI: Invalid package element [0]: got number, expecting [R]
_ART package 0 is invalid, ignored
systemd[1]: Started Journal Service.
parport_pc 00:05: [irq 5]
parport_pc 00:05: activated
parport_pc 00:05: reported by Plug and Play ACPI
proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
systemd-journald[346]: Received client request to flush runtime journal.
proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: PC Speaker as /devices/platform/pcspkr/input/input10
Error: Driver 'pcspkr' is already registered, aborting...
mc: Linux media interface: v0.10
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11
videodev: Linux video capture interface: v2.00
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
cryptd: max_cpu_qlen set to 1000
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
Adding 8300540k swap on /dev/sda3. Priority:-2 extents:1 across:8300540k SSFS
iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 7265D-29.ucode op_mode iwlmvm
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3235: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x13
uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6709)
dell_laptop: Using i8042 filter function for receiving events
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input20
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ppdev: user-space parallel port driver
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
intel_rapl_common: RAPL package-0 domain package locked by BIOS
intel_rapl_common: RAPL package-0 domain dram locked by BIOS
usbcore: registered new interface driver btusb
iwlwifi 0000:02:00.0: base HW address: 4c:34:88:3e:64:6c
Bluetooth: hci0: read Intel version: 370810011003110e32
Bluetooth: hci0: Intel device is already patched. patch num: 32
audit: type=1400 audit(1589420056.513:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=549 comm="apparmor_parser"
audit: type=1400 audit(1589420056.521:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=547 comm="apparmor_parser"
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone8: failed to read out thermal zone (-61)
audit: type=1400 audit(1589420056.523:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=546 comm="apparmor_parser"
audit: type=1400 audit(1589420056.529:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=548 comm="apparmor_parser"
audit: type=1400 audit(1589420056.543:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=562 comm="apparmor_parser"
audit: type=1400 audit(1589420056.543:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=562 comm="apparmor_parser"
audit: type=1400 audit(1589420056.567:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=566 comm="apparmor_parser"
audit: type=1400 audit(1589420056.575:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=566 comm="apparmor_parser"
audit: type=1400 audit(1589420056.575:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=566 comm="apparmor_parser"
iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
kauditd_printk_skb: 1 callbacks suppressed
audit: type=1400 audit(1589420056.595:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd" pid=572 comm="apparmor_parser"
audit: type=1400 audit(1589420056.595:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd//qemu_bridge_helper" pid=572 comm="apparmor_parser"
audit: type=1400 audit(1589420056.711:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=554 comm="apparmor_parser"
audit: type=1400 audit(1589420056.711:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=554 comm="apparmor_parser"
audit: type=1400 audit(1589420056.711:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=554 comm="apparmor_parser"
audit: type=1400 audit(1589420056.711:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=554 comm="apparmor_parser"
audit: type=1400 audit(1589420056.711:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=554 comm="apparmor_parser"
audit: type=1400 audit(1589420056.719:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=557 comm="apparmor_parser"
audit: type=1400 audit(1589420056.719:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=557 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
wlp2s0: authenticate with 08:3e:5d:52:0d:9e
wlp2s0: send auth to 08:3e:5d:52:0d:9e (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 08:3e:5d:52:0d:9e (try 1/3)
wlp2s0: RX AssocResp from 08:3e:5d:52:0d:9e (capab=0x1411 status=0 aid=5)
wlp2s0: associated
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 08:3e:5d:52:0d:9e
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
rfkill: input handler enabled
rfkill: input handler disabled
hid: raw HID events driver (C) Jiri Kosina
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
hid-generic 0005:046D:B014.0001: unknown main item tag 0x0
input: Bluetooth Mouse M336/M337/M535 Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/bluetooth/hci0/hci0:256/0005:046D:B014.0001/input/input21
input: Bluetooth Mouse M336/M337/M535 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/bluetooth/hci0/hci0:256/0005:046D:B014.0001/input/input22
input: Bluetooth Mouse M336/M337/M535 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/bluetooth/hci0/hci0:256/0005:046D:B014.0001/input/input25
hid-generic 0005:046D:B014.0001: input,hidraw0: BLUETOOTH HID v12.00 Mouse [Bluetooth Mouse M336/M337/M535] on 4c:34:88:3e:64:70