dmesg - phenom2.2ghz

Return To phenom2.2ghz System Information

Linux version 4.15.0-99-generic (buildd@lcy01-amd64-013) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #100-Ubuntu SMP Wed Apr 22 20:32:56 UTC 2020 (Ubuntu 4.15.0-99.100-generic 4.15.18)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e3000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000d7f8ffff] usable
BIOS-e820: [mem 0x00000000d7f90000-0x00000000d7f9dfff] ACPI data
BIOS-e820: [mem 0x00000000d7f9e000-0x00000000d7fdffff] ACPI NVS
BIOS-e820: [mem 0x00000000d7fe0000-0x00000000d7fedfff] reserved
BIOS-e820: [mem 0x00000000d7ff0000-0x00000000d7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M3N78, BIOS 0216    06/18/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000D0000000 mask FFFFF8000000 write-back
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000120000000 aka 4608M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
e820: update [mem 0xd8000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xd7f90 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f]
Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x10b91000, 0x10b91fff] PGTABLE
BRK [0x10b92000, 0x10b92fff] PGTABLE
BRK [0x10b93000, 0x10b93fff] PGTABLE
BRK [0x10b94000, 0x10b94fff] PGTABLE
BRK [0x10b95000, 0x10b95fff] PGTABLE
RAMDISK: [mem 0x3089f000-0x34446fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FB6B0 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000D7F90100 000064 (v01 061808 XSDT1622 20080618 MSFT 00000097)
ACPI: FACP 0x00000000D7F90290 0000F4 (v03 061808 FACP1622 20080618 MSFT 00000097)
ACPI: DSDT 0x00000000D7F90450 00AAD0 (v01 A1046  A1046000 00000000 INTL 20051117)
ACPI: FACS 0x00000000D7F9E000 000040
ACPI: FACS 0x00000000D7F9E000 000040
ACPI: APIC 0x00000000D7F90390 000080 (v01 061808 APIC1622 20080618 MSFT 00000097)
ACPI: MCFG 0x00000000D7F90410 00003C (v01 061808 OEMMCFG  20080618 MSFT 00000097)
ACPI: OEMB 0x00000000D7F9E040 000072 (v01 061808 OEMB1622 20080618 MSFT 00000097)
ACPI: HPET 0x00000000D7F9AF20 000038 (v01 061808 OEMHPET0 20080618 MSFT 00000097)
ACPI: INFO 0x00000000D7F9E0C0 000124 (v01 061808 AMDINFO  20080618 MSFT 00000097)
ACPI: NVHD 0x00000000D7F9E1F0 000284 (v01 061808 NVHDCP   20080618 MSFT 00000097)
ACPI: SSDT 0x00000000D7F9AF60 000544 (v01 A_M_I_ POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
NODE_DATA(0) allocated [mem 0x11ffd3000-0x11fffdfff]
tsc: Fast TSC calibration using PIT
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000011fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x00000000d7f8ffff]
  node   0: [mem 0x0000000100000000-0x000000011fffffff]
Reserved but unavailable: 99 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
On node 0 totalpages: 1015597
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 13759 pages used for memmap
  DMA32 zone: 880528 pages, LIFO batch:31
  Normal zone: 2048 pages used for memmap
  Normal zone: 131072 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
PM: Registered nosave memory: [mem 0xd7f90000-0xd7f9dfff]
PM: Registered nosave memory: [mem 0xd7f9e000-0xd7fdffff]
PM: Registered nosave memory: [mem 0xd7fe0000-0xd7fedfff]
PM: Registered nosave memory: [mem 0xd7fee000-0xd7feffff]
PM: Registered nosave memory: [mem 0xd7ff0000-0xd7ffffff]
PM: Registered nosave memory: [mem 0xd8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xd8000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u524288
pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists, mobility grouping on.  Total pages: 999705
Policy zone: Normal
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xcc000000-0xcdffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xcc000000-0xcfffffff] (65536KB)
PM: Registered nosave memory: [mem 0xcc000000-0xcfffffff]
Memory: 3777008K/4062388K available (12300K kernel code, 2481K rwdata, 4268K rodata, 2432K init, 2712K bss, 285380K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 39364 entries in 154 pages
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
	Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 2 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 2250.132 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4500.26 BogoMIPS (lpj=9000528)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD Phenom(tm) 9150e Quad-Core Processor (family: 0x10, model: 0x2, stepping: 0x3)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (18001.05 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xd7f9e000-0xd7fdffff] (270336 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 18:56:34, date: 05/11/20
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1589223394.152:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
node 0 link 0: io port [1000, 1fff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [e0000000, efffffff] ==> [e0100000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [e0000000, fe0bffff] ==> [e0100000, fe0bffff]
TOM2: 0000000120000000 aka 4608M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io  0x0000-0xffff]
bus: 00 [mem 0xe0100000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0x120000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 12 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [10de:0754] type 00 class 0x050000
pci 0000:00:01.0: [10de:075c] type 00 class 0x060100
pci 0000:00:01.0: reg 0x10: [io  0x0900-0x09ff]
pci 0000:00:01.1: [10de:0752] type 00 class 0x0c0500
pci 0000:00:01.1: reg 0x10: [io  0x0e00-0x0e3f]
pci 0000:00:01.1: reg 0x20: [io  0x0600-0x063f]
pci 0000:00:01.1: reg 0x24: [io  0x0700-0x073f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.2: [10de:0751] type 00 class 0x050000
pci 0000:00:01.3: [10de:0753] type 00 class 0x0b4000
pci 0000:00:01.3: reg 0x10: [mem 0xfcf80000-0xfcffffff]
pci 0000:00:01.4: [10de:0568] type 00 class 0x050000
pci 0000:00:02.0: [10de:077b] type 00 class 0x0c0310
pci 0000:00:02.0: reg 0x10: [mem 0xfcf7e000-0xfcf7efff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: [10de:077c] type 00 class 0x0c0320
pci 0000:00:02.1: reg 0x10: [mem 0xfcf7fc00-0xfcf7fcff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: [10de:077d] type 00 class 0x0c0310
pci 0000:00:04.0: reg 0x10: [mem 0xfcf7d000-0xfcf7dfff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: [10de:077e] type 00 class 0x0c0320
pci 0000:00:04.1: reg 0x10: [mem 0xfcf7f800-0xfcf7f8ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: [10de:0759] type 00 class 0x01018a
pci 0000:00:06.0: reg 0x20: [io  0xffa0-0xffaf]
pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:07.0: [10de:0774] type 00 class 0x040300
pci 0000:00:07.0: reg 0x10: [mem 0xfcf78000-0xfcf7bfff]
pci 0000:00:07.0: PME# supported from D3hot D3cold
pci 0000:00:08.0: [10de:075a] type 01 class 0x060401
pci 0000:00:09.0: [10de:0ad0] type 00 class 0x010185
pci 0000:00:09.0: reg 0x10: [io  0xd480-0xd487]
pci 0000:00:09.0: reg 0x14: [io  0xd400-0xd403]
pci 0000:00:09.0: reg 0x18: [io  0xd080-0xd087]
pci 0000:00:09.0: reg 0x1c: [io  0xd000-0xd003]
pci 0000:00:09.0: reg 0x20: [io  0xcc00-0xcc0f]
pci 0000:00:09.0: reg 0x24: [mem 0xfcf76000-0xfcf77fff]
pci 0000:00:0a.0: [10de:0760] type 00 class 0x020000
pci 0000:00:0a.0: reg 0x10: [mem 0xfcf7c000-0xfcf7cfff]
pci 0000:00:0a.0: reg 0x14: [io  0xc880-0xc887]
pci 0000:00:0a.0: reg 0x18: [mem 0xfcf7f400-0xfcf7f4ff]
pci 0000:00:0a.0: reg 0x1c: [mem 0xfcf7f000-0xfcf7f00f]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: [10de:0569] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: [10de:0778] type 01 class 0x060400
pci 0000:00:10.0: enabling Extended Tags
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: [10de:075b] type 01 class 0x060400
pci 0000:00:12.0: enabling Extended Tags
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [10de:077a] type 01 class 0x060400
pci 0000:00:13.0: enabling Extended Tags
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:08.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:08.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:08.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:08.0:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
pci 0000:02:00.0: [10de:0849] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:02:00.0: reg 0x24: [io  0xec00-0xec7f]
pci 0000:02:00.0: reg 0x30: [mem 0xfebe0000-0xfebfffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 02]
pci 0000:00:0b.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:0b.0:   bridge window [mem 0xfd000000-0xfebfffff]
pci 0000:00:0b.0:   bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 03]
pci 0000:00:12.0: PCI bridge to [bus 04]
pci 0000:00:13.0: PCI bridge to [bus 05]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:02:00.0: vgaarb: setting as boot VGA device
pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:02:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xd7f90000-0xd7ffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: [dma 2]
pnp 00:00: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:02: disabling [io  0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io  0x0900-0x09ff]
pnp 00:02: disabling [io  0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io  0x0900-0x09ff]
system 00:02: [io  0x04d0-0x04d1] has been reserved
system 00:02: [io  0x0800-0x080f] has been reserved
system 00:02: [io  0x0500-0x057f] has been reserved
system 00:02: [io  0x0580-0x05ff] has been reserved
system 00:02: [io  0x0800-0x087f] could not be reserved
system 00:02: [io  0x0880-0x08ff] has been reserved
system 00:02: [io  0x0d00-0x0d7f] has been reserved
system 00:02: [io  0x0d80-0x0dff] has been reserved
system 00:02: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:02: [mem 0x000de000-0x000dffff window] has been reserved
system 00:02: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io  0x0230-0x023f] has been reserved
system 00:05: [io  0x0290-0x029f] has been reserved
system 00:05: [io  0x0a00-0x0a0f] has been reserved
system 00:05: [io  0x0a10-0x0a1f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:08.0: PCI bridge to [bus 01]
pci 0000:00:0b.0: PCI bridge to [bus 02]
pci 0000:00:0b.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:0b.0:   bridge window [mem 0xfd000000-0xfebfffff]
pci 0000:00:0b.0:   bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 03]
pci 0000:00:12.0: PCI bridge to [bus 04]
pci 0000:00:13.0: PCI bridge to [bus 05]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfd000000-0xfebfffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xfbffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
pci 0000:00:07.0: Enabling HT MSI Mapping
pci 0000:00:08.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:0a.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Enabling HT MSI Mapping
pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 61088K
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ cc000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x00000007)
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.1: EHCI Host Controller
ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.1: debug port 1
ehci-pci 0000:00:02.1: cache line size of 64 is not supported
ehci-pci 0000:00:02.1: irq 22, io mem 0xfcf7fc00
ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.0-99-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:04.1: EHCI Host Controller
ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:04.1: debug port 1
ehci-pci 0000:00:04.1: cache line size of 64 is not supported
ehci-pci 0000:00:04.1: irq 20, io mem 0xfcf7f800
ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.0-99-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:04.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:02.0: OHCI PCI host controller
ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:02.0: irq 23, io mem 0xfcf7e000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 4.15.0-99-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:02.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ohci-pci 0000:00:04.0: OHCI PCI host controller
ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:04.0: irq 21, io mem 0xfcf7d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.15.0-99-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:04.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
mce: Using 6 MCE banks
RAS: Correctable Errors collector initialized.
microcode: microcode updated early to new patch_level=0x01000083
microcode: CPU0: patch_level=0x01000083
microcode: CPU1: patch_level=0x01000083
microcode: CPU2: patch_level=0x01000083
microcode: CPU3: patch_level=0x01000083
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1768237440, 0)->(1742214934, 26022506)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 7480108fe56bba9284001dfb9078560125be4684'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
ima: Allocated hash algorithm: sha1
evm: HMAC attrs: 0x1
  Magic number: 4:620:948
tty tty5: hash matches
processor cpu3: hash matches
memory memory1: hash matches
rtc_cmos 00:03: setting system clock to 2020-05-11 18:56:36 UTC (1589223396)
acpi_cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel image memory: 2432K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1876K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input4
Floppy drive(s): fd0 is 1.44M
i2c i2c-0: nForce2 SMBus adapter at 0x600
ACPI Warning: SystemIO range 0x0000000000000700-0x000000000000073F conflicts with OpRegion 0x0000000000000700-0x000000000000073F (\SM00) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000700-0x000000000000073F conflicts with OpRegion 0x0000000000000700-0x000000000000073F (\SM00) (20170831/utaddress-247)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i2c i2c-1: nForce2 SMBus adapter at 0x700
pata_amd 0000:00:06.0: version 0.4.1
scsi host0: pata_amd
FDC 0 is a post-1991 82077
scsi host1: pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ahci 0000:00:09.0: version 3.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh 
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata3: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76100 irq 24
ata4: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76180 irq 24
ata5: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76200 irq 24
ata6: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76280 irq 24
ata7: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76300 irq 24
ata8: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76380 irq 24
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:22:15:cf:f3:36
forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
forcedeth 0000:00:0a.0 enp0s10: renamed from eth0
MXM: GUID detected in BIOS
ACPI Warning: \_SB.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
ACPI: \_SB_.PCI0.IXVE.IGPU: failed to evaluate _DSM
ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21
nouveau 0000:02:00.0: NVIDIA MCP77/MCP78 (0aa480a2)
nouveau 0000:02:00.0: bios: version 62.77.19.00.00
nouveau 0000:02:00.0: fb: 128 MiB stolen system memory
ata2: port disabled--ignoring
usb 3-2: new low-speed USB device number 2 using ohci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: ST500LT012-9WS142, 0001LVM1, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: ATA-9: ST2000DM006-2DM164, CC26, max UDMA/133
ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: ATA-8: WDC WD5000AAKS-75A7B0, 01.03B01, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata5.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      ST500LT012-9WS14 LVM1 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 4096-byte physical blocks
ata4.00: configured for UDMA/133
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-7 3B01 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: Attached scsi generic sg1 type 0
scsi 4:0:0:0: Direct-Access     ATA      ST2000DM006-2DM1 CC26 PQ: 0 ANSI: 5
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 4:0:0:0: [sdc] 4096-byte physical blocks
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8: SATA link down (SStatus 0 SControl 300)
 sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 4-1: new full-speed USB device number 2 using ohci-pci
 sdc: sdc1 sdc2 sdc3 sdc4
sd 4:0:0:0: [sdc] Attached SCSI disk
 sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
random: fast init done
usb 3-2: New USB device found, idVendor=046d, idProduct=c517
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Receiver
usb 3-2: Manufacturer: Logitech
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 4-1: New USB device found, idVendor=248a, idProduct=8514
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: Wireless Receiver
usb 4-1: Manufacturer: Telink
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/0003:046D:C517.0001/input/input6
input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/0003:248A:8514.0003/input/input7
tsc: Refined TSC clocksource calibration: 2250.000 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x206eb41f0da, max_idle_ns: 440795249997 ns
logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2/input0
logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/0003:046D:C517.0002/input/input8
hid-generic 0003:248A:8514.0003: input,hidraw1: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:04.0-1/input0
input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.1/0003:248A:8514.0004/input/input9
logitech 0003:046D:C517.0002: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2/input1
hid-generic 0003:248A:8514.0004: input,hidraw3: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:04.0-1/input1
[TTM] Zone  kernel: Available graphics memory: 1955200 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:02:00.0: DRM: VRAM: 128 MiB
nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
nouveau 0000:02:00.0: DRM: TMDS table version 2.0
nouveau 0000:02:00.0: DRM: DCB version 4.0
nouveau 0000:02:00.0: DRM: DCB outp 00: 01000300 0000001e
nouveau 0000:02:00.0: DRM: DCB outp 01: 01011332 00020010
nouveau 0000:02:00.0: DRM: DCB conn 00: 00000100
nouveau 0000:02:00.0: DRM: DCB conn 01: 00001261
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:02:00.0: DRM: MM: using M2MF for buffer copies
nouveau 0000:02:00.0: DRM: allocated 1366x768 fb: 0x50000, bo         (ptrval)
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
raid6: sse2x1   gen()  3108 MB/s
raid6: sse2x1   xor()  2825 MB/s
raid6: sse2x2   gen()  4929 MB/s
raid6: sse2x2   xor()  4870 MB/s
raid6: sse2x4   gen()  5893 MB/s
raid6: sse2x4   xor()  2630 MB/s
raid6: using algorithm sse2x4 gen() 5893 MB/s
raid6: .... xor() 2630 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
xor: measuring software checksum speed
   prefetch64-sse:  9015.000 MB/sec
   generic_sse:  8423.000 MB/sec
xor: using function: prefetch64-sse (9015.000 MB/sec)
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-generic
clocksource: Switched to clocksource tsc
print_req_error: I/O error, dev fd0, sector 0
floppy: error 10 while reading block 0
EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-tor.slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Syslog Socket.
EXT4-fs (sdc3): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:01: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
systemd-journald[424]: Received request to flush runtime journal from PID 1
it87: Found IT8712F chip at 0x290, revision 8
it87: VID is disabled (pins used for GPIO)
ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x00000000000002AF (\_SB.PCI0.SBRG.SIOR.ECRE) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x00000000000002AF (\_SB.PCI0.SBRG.SIOR.ECRE) (20170831/utaddress-247)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
asus_atk0110: Resources not safely usable due to acpi_enforce_resources kernel parameter
asus_atk0110: Resources not safely usable due to acpi_enforce_resources kernel parameter
k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
snd_hda_intel 0000:00:07.0: Disabling MSI
snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708B 8-Ch: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_via hdaudioC0D0:    dig-out=0x20/0x0
snd_hda_codec_via hdaudioC0D0:    inputs:
snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x1a
snd_hda_codec_via hdaudioC0D0:      Front Mic=0x1e
snd_hda_codec_via hdaudioC0D0:      Line=0x1b
snd_hda_codec_via hdaudioC0D0:      CD=0x1f
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input14
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input15
input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input16
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input17
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 7812092k swap on /dev/sdc1.  Priority:-2 extents:1 across:7812092k FS
EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1589223441.750:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=959 comm="apparmor_parser"
audit: type=1400 audit(1589223441.750:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=959 comm="apparmor_parser"
audit: type=1400 audit(1589223441.750:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=959 comm="apparmor_parser"
audit: type=1400 audit(1589223441.750:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=959 comm="apparmor_parser"
audit: type=1400 audit(1589223441.966:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=957 comm="apparmor_parser"
audit: type=1400 audit(1589223441.966:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=957 comm="apparmor_parser"
audit: type=1400 audit(1589223441.978:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=978 comm="apparmor_parser"
audit: type=1400 audit(1589223441.978:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=978 comm="apparmor_parser"
audit: type=1400 audit(1589223441.978:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=978 comm="apparmor_parser"
audit: type=1400 audit(1589223441.978:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=978 comm="apparmor_parser"
ip6_tables: (C) 2000-2006 Netfilter Core Team
forcedeth 0000:00:0a.0 enp0s10: MSI enabled
IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s10: link becomes ready
new mount options do not match the existing superblock, will be ignored
rfkill: input handler disabled
print_req_error: I/O error, dev fd0, sector 0
floppy: error 10 while reading block 0
print_req_error: I/O error, dev fd0, sector 0
floppy: error 10 while reading block 0

Return To phenom2.2ghz System Information