dmesg - configcnc
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-4linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-4linuxcnc
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
BIOS-e820: 00000000dfff0000 - 00000000dfff3000 (ACPI NVS)
BIOS-e820: 00000000dfff3000 - 00000000e0000000 (ACPI data)
BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. M52L-S3P/M52L-S3P, BIOS F1 12/31/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xdfff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 000100000000 mask FFFFE0000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000120000000 aka 4608M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
found SMP MP-table at [c00f4b70] f4b70
initial memory mapped : 0 - 01800000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 0x377fdfff @ [mem 0x017f8000-0x017fffff]
RAMDISK: 36412000 - 37201000
ACPI: RSDP 000f6540 00014 (v00 GBT )
ACPI: RSDT dfff3000 00038 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: FACP dfff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: DSDT dfff30c0 04845 (v01 GBT NVDAACPI 00001000 MSFT 03000000)
ACPI: FACS dfff0000 00040
ACPI: SSDT dfff7a00 0095E (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET dfff8380 00038 (v01 GBT NVDAACPI 42302E31 NVDA 00000098)
ACPI: MCFG dfff83c0 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: APIC dfff7940 00098 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: Local APIC address 0xfee00000
2695MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000dfff0
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000dfff0
On node 0 totalpages: 917375
free_area_init_node: node 0, pgdat c1498a00, node_mem_map f4812200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 5392 pages used for memmap
HighMem zone: 684770 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at e0000000 (gap: e0000000:10000000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 17 pages/cpu @f77a7000 s48384 r0 d21248 u69632
pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 910207
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 7339776 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:000dfff0)
Memory: 3612384k/3669952k available (3495k kernel code, 57116k reserved, 1237k data, 416k init, 2760648k highmem)
virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc14a0000 - 0xc1508000 ( 416 kB)
.data : 0xc1369d4a - 0xc149f480 (1237 kB)
.text : 0xc1000000 - 0xc1369d4a (3495 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f3c06000 soft=f3c08000
Interrupt pipeline (release #3)
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2913.065 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5826.13 BogoMIPS (lpj=11652260)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
using AMD E400 aware idle routine
ACPI: Core revision 20120320
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) X2 245 Processor stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f3c94000 soft=f3c96000
Booting Node 0, Processors #1
Initializing CPU#1
NMI watchdog: enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (11652.26 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xdfff0000-0xdfff2fff] (12288 bytes)
dummy:
NET: Registered protocol family 16
node 0 link 0: io port [1000, fffff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [mem 0xf0000000-0xf00fffff]
node 0 link 0: mmio [f0000000, f7ffffff] ==> [f0100000, f7ffffff]
node 0 link 0: mmio [f8000000, ffb7ffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [e0000000, efffffff]
TOM2: 0000000120000000 aka 4608M
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0xf0100000-0xffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
bus: 00 index 3 [mem 0xe0000000-0xefffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc3f]
pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
pci 0000:00:02.0: reg 10: [mem 0xfa106000-0xfa106fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
pci 0000:00:02.1: reg 10: [mem 0xfa105000-0xfa1050ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
pci 0000:00:05.0: reg 10: [mem 0xfa100000-0xfa103fff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
pci 0000:00:07.0: reg 10: [mem 0xfa107000-0xfa107fff]
pci 0000:00:07.0: reg 14: [io 0xc400-0xc407]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
pci 0000:00:08.0: reg 20: [io 0xd800-0xd80f]
pci 0000:00:08.0: reg 24: [mem 0xfa104000-0xfa104fff]
pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xe0000000-0xfebfffff] (subtractive decode)
pci 0000:02:00.0: [1002:954f] type 00 class 0x030000
pci 0000:02:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xf9000000-0xf900ffff 64bit]
pci 0000:02:00.0: reg 20: [io 0xa000-0xa0ff]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: [1002:aa38] type 00 class 0x040300
pci 0000:02:00.1: reg 10: [mem 0xf9010000-0xf9013fff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
pci 0000:00:09.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: [9710:9912] type 00 class 0x070002
pci 0000:03:00.0: reg 10: [io 0xb000-0xb007]
pci 0000:03:00.0: reg 14: [mem 0xfa000000-0xfa000fff]
pci 0000:03:00.0: reg 24: [mem 0xfa001000-0xfa001fff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.1: [9710:9912] type 00 class 0x070002
pci 0000:03:00.1: reg 10: [io 0xb400-0xb407]
pci 0000:03:00.1: reg 14: [mem 0xfa002000-0xfa002fff]
pci 0000:03:00.1: reg 24: [mem 0xfa003000-0xfa003fff]
pci 0000:03:00.1: PME# supported from D3hot D3cold
pci 0000:03:00.2: [9710:9912] type 00 class 0x070103
pci 0000:03:00.2: reg 10: [io 0xb800-0xb807]
pci 0000:03:00.2: reg 14: [io 0xbc00-0xbc07]
pci 0000:03:00.2: reg 18: [mem 0xfa004000-0xfa004fff]
pci 0000:03:00.2: reg 24: [mem 0xfa005000-0xfa005fff]
pci 0000:03:00.2: PME# supported from D3hot D3cold
pci 0000:00:0c.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0c.0: bridge window [mem 0xfa000000-0xfa0fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 00000000dfff0000 - 00000000dfffffff
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xe0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x1000-0x107f]
pnp 00:01: [io 0x1080-0x10ff]
pnp 00:01: [io 0x1400-0x147f]
pnp 00:01: [io 0x1480-0x14ff]
pnp 00:01: [io 0x1800-0x187f]
pnp 00:01: [io 0x1880-0x18ff]
pnp 00:01: [mem 0xfefe0000-0xfefe01ff]
pnp 00:01: [mem 0xfefe1000-0xfefe10ff]
pnp 00:01: [mem 0x00000000-0xffffffff disabled]
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1080-0x10ff] has been reserved
system 00:01: [io 0x1400-0x147f] has been reserved
system 00:01: [io 0x1480-0x14ff] has been reserved
system 00:01: [io 0x1800-0x187f] has been reserved
system 00:01: [io 0x1880-0x18ff] has been reserved
system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0022-0x003f]
pnp 00:02: [io 0x0044-0x005f]
pnp 00:02: [io 0x0062-0x0063]
pnp 00:02: [io 0x0065-0x006f]
pnp 00:02: [io 0x0074-0x007f]
pnp 00:02: [io 0x0091-0x0093]
pnp 00:02: [io 0x00a2-0x00bf]
pnp 00:02: [io 0x00e0-0x00ef]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x0800-0x087f]
pnp 00:02: [io 0x0295-0x0296]
pnp 00:02: [io 0x0290-0x0294]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: [io 0x0295-0x0296] has been reserved
system 00:02: [io 0x0290-0x0294] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x03f0-0x03f5]
pnp 00:08: [io 0x03f7]
pnp 00:08: [irq 6]
pnp 00:08: [dma 2]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: [irq 4]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io 0x02f8-0x02ff]
pnp 00:0a: [irq 3]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [io 0x0378-0x037f]
pnp 00:0b: [irq 7]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0c: [io 0x0060]
pnp 00:0c: [io 0x0064]
pnp 00:0c: [irq 1]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0d: [mem 0xf0000000-0xf7ffffff]
system 00:0d: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x000cf000-0x000cffff]
pnp 00:0e: [mem 0x000f0000-0x000f7fff]
pnp 00:0e: [mem 0x000f8000-0x000fbfff]
pnp 00:0e: [mem 0x000fc000-0x000fffff]
pnp 00:0e: [mem 0xdfff0000-0xdfffffff]
pnp 00:0e: [mem 0xffff0000-0xffffffff]
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x00100000-0xdffeffff]
pnp 00:0e: [mem 0x00000000-0xffffffff disabled]
pnp 00:0e: [mem 0xfec00000-0xfec00fff]
pnp 00:0e: [mem 0xfee00000-0xfee00fff]
pnp 00:0e: [Firmware Bug]: [mem 0x00000000-0xffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xf0000000-0xf00fffff]; adding more reservations
system 00:0e: [mem 0x000cf000-0x000cffff] has been reserved
system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0e: [mem 0xdfff0000-0xdfffffff] could not be reserved
system 00:0e: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x00100000-0xdffeffff] could not be reserved
system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:04.0: bridge window [io 0x9000-0x9fff]
pci 0000:02:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
pci 0000:00:09.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:0c.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0c.0: bridge window [mem 0xfa000000-0xfa0fffff]
pci 0000:00:04.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xe0000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfa0fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
pci 0000:02:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14268k freed
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1581267781.408:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1691
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
0000:03:00.0: ttyS2 at I/O 0xb000 (irq = 16) is a ST16650V2
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
0000:03:00.1: ttyS3 at I/O 0xb400 (irq = 16) is a ST16650V2
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
TCP: cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2020-02-09 17:03:02 UTC (1581267782)
Freeing unused kernel memory: 416k freed
Write protecting the kernel text: 3496k
Write protecting the kernel read-only data: 984k
udevd[49]: starting version 175
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
microcode: CPU0: patch_level=0x00000000
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
forcedeth 0000:00:07.0: setting latency timer to 64
libata version 3.00 loaded.
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Floppy drive(s): fd0 is 1.44M
microcode: CPU0: new patch_level=0x010000c7
microcode: CPU1: patch_level=0x00000000
microcode: CPU1: new patch_level=0x010000c7
microcode: Microcode Update Driver: v2.00 , Peter Oruba
FDC 0 is a post-1991 82077
Refined TSC clocksource calibration: 2913.248 MHz.
Switching to clocksource tsc
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:24:1d:6d:22:99
forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfa105000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xfa106000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ata1.00: HPA detected: current 488395055, native 488397168
ata1.00: ATA-7: ST3250823A, 3.02, max UDMA/100
ata1.00: 488395055 sectors, multi 16: LBA48
ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST3250823A 3.02 PQ: 0 ANSI: 5
ata2: port disabled--ignoring
usb 1-4: new high-speed USB device number 3 using ehci_hcd
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB02, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB02 PQ: 0 ANSI: 5
usb 1-4: New USB device found, idVendor=ffff, idProduct=ffff
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
ata4: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
usb 2-3: new full-speed USB device number 2 using ohci_hcd
usb 2-3: New USB device found, idVendor=1b1c, idProduct=1b3d
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: Corsair Gaming K55 RGB Keyboard
usb 2-3: Manufacturer: Corsair
usb 2-3: SerialNumber: 0001
usb 2-6: new low-speed USB device number 3 using ohci_hcd
usb 2-6: New USB device found, idVendor=045e, idProduct=00cb
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-6: Product: Microsoft Basic Optical Mouse v2.0
usb 2-6: Manufacturer: Microsoft
input: Corsair Corsair Gaming K55 RGB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1
generic-usb 0003:1B1C:1B3D.0001: input,hidraw0: USB HID v1.11 Keyboard [Corsair Corsair Gaming K55 RGB Keyboard] on usb-0000:00:02.0-3/input0
input: Corsair Corsair Gaming K55 RGB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input2
generic-usb 0003:1B1C:1B3D.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Corsair Corsair Gaming K55 RGB Keyboard] on usb-0000:00:02.0-3/input1
generic-usb 0003:1B1C:1B3D.0003: hiddev0,hidraw2: USB HID v1.11 Device [Corsair Corsair Gaming K55 RGB Keyboard] on usb-0000:00:02.0-3/input2
input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input3
generic-usb 0003:045E:00CB.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:02.0-6/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-4.1: new full-speed USB device number 5 using ehci_hcd
usb 1-4.1: New USB device found, idVendor=1b1c, idProduct=1b3b
usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.1: Product: Corsair Gaming MM800 RGB POLARIS
usb 1-4.1: Manufacturer: Corsair Components, Inc.
usb 1-4.1: SerialNumber: 1F8000010015BDAEC1832B56471900F5
generic-usb 0003:1B1C:1B3B.0005: hiddev0,hidraw4: USB HID v1.11 Device [Corsair Components, Inc. Corsair Gaming MM800 RGB POLARIS] on usb-0000:00:02.1-4.1/input0
input: Corsair Components, Inc. Corsair Gaming MM800 RGB POLARIS as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.1/1-4.1:1.1/input/input4
generic-usb 0003:1B1C:1B3B.0006: input,hidraw5: USB HID v1.11 Keyboard [Corsair Components, Inc. Corsair Gaming MM800 RGB POLARIS] on usb-0000:00:02.1-4.1/input1
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
udevd[399]: starting version 175
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
i2c i2c-1: nForce2 SMBus adapter at 0x1c40
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x1787:0x2271).
[drm] register mmio base: 0xF9000000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:02:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 433210 kiB
[TTM] Zone highmem: Available graphics memory: 1813534 kiB
[TTM] Initializing pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: ib pool ready.
[drm] Loading RV710 Microcode
ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
parport1: PC-style at 0xb800 (0xbc00), irq 16 [PCSPP,TRISTATE]
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:02:00.0: WB enabled
[drm] fence driver on ring 0 use gpu addr 0x20000c00 and cpu addr 0xff97fc00
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] HDMI-A
[drm] HPD1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] DVI-I
[drm] HPD4
[drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xE0142000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
hda_intel: Disabling MSI
snd_hda_intel 0000:00:05.0: setting latency timer to 64
Console: switching to colour frame buffer device 240x67
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.16.0 20080528 for 0000:02:00.0 on minor 0
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input7
input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input14
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input15
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input16
Adding 8385532k swap on /dev/sda5. Priority:-1 extents:1 across:8385532k
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
loop: module loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
NFS: Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
lp0: using parport0 (interrupt-driven).
lp1: using parport1 (interrupt-driven).
ppdev: user-space parallel port driver
ttyS2: LSR safety check engaged!
ttyS3: LSR safety check engaged!
eth0: no IPv6 routers present
I-pipe: head domain RTAI registered.
RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) .
RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12556215, CLK_FREQ 2913065000, CPU_FREQ 2913065000
RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312
TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12556215, 12556215, 12522750
RTAI[malloc]: global heap size = 2097152 bytes, .
, , kstacks pool size = 524288 bytes.
RTAI[sched]: hard timer type/freq = APIC/12556215(Hz); default timing: oneshot; linear timed lists.
RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2913065000 hz.
RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns.
RTAI[math]: loaded.
RTAPI: ERROR: Unexpected realtime delay on task 1
This Message will only display once per session.
Run the Latency Test and resolve before continuing.