dmesg - test1

Return To test1 System Information

microcode: CPU0 microcode updated early to revision 0xb000037, date = 2019-05-14
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.12-124.32.3.el6uek.x86_64 (mockbuild@jenkins-10-147-72-125-b132afbf-0413-4988-8a1d-6455ae05f3c3) (gcc version 4.9.2 20150212 (Red Hat 4.9.2-6.2.0.3) (GCC) ) #2 SMP Tue Oct 15 17:04:17 PDT 2019
Command line: ro root=/dev/mapper/PQ00-root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=PQ01/swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=PQ00/root  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet numa=off transparent_hugepage=never
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000079266fff] usable
BIOS-e820: [mem 0x0000000079267000-0x0000000079a47fff] reserved
BIOS-e820: [mem 0x0000000079a48000-0x0000000079aa9fff] ACPI data
BIOS-e820: [mem 0x0000000079aaa000-0x0000000079fdcfff] ACPI NVS
BIOS-e820: [mem 0x0000000079fdd000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000607fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: Cisco Systems Inc UCSB-B200-M4/UCSB-B200-M4, BIOS B200M4.3.1.3i.0.032120171710 03/21/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x6080000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000080000000 mask 3FFF80000000 uncachable
  1 base 038000000000 mask 3F8000000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
e820: last_pfn = 0x79267 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce10-0x000fce1f] mapped at [ffff8800000fce10]
Base memory trampoline at [ffff880000096000] 96000 size 28672
Using GB pages for direct mapping
BRK [0x02159000, 0x02159fff] PGTABLE
BRK [0x0215a000, 0x0215afff] PGTABLE
BRK [0x0215b000, 0x0215bfff] PGTABLE
RAMDISK: [mem 0x35707000-0x37feffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 Cisco )
ACPI: XSDT 0x0000000079A5B0A8 0000CC (v01 Cisco  CiscoUCS 01072009 AMI  00010013)
ACPI: FACP 0x0000000079A8D940 00010C (v05 Cisco  CiscoUCS 01072009 AMI  00010013)
ACPI: DSDT 0x0000000079A5B200 032739 (v02 Cisco  CiscoUCS 01072009 INTL 20091013)
ACPI: FACS 0x0000000079FDBF80 000040
ACPI: APIC 0x0000000079A8DA50 000144 (v03 Cisco  CiscoUCS 01072009 AMI  00010013)
ACPI: FPDT 0x0000000079A8DB98 000044 (v01 Cisco  CiscoUCS 01072009 AMI  00010013)
ACPI: FIDT 0x0000000079A8DBE0 00009C (v01 Cisco  CiscoUCS 01072009 AMI  00010013)
ACPI: SPMI 0x0000000079A8DC80 000041 (v05 Cisco  CiscoUCS 00000000 AMI. 00000000)
ACPI: MCFG 0x0000000079A8DCC8 00003C (v01 Cisco  CiscoUCS 01072009 MSFT 00000097)
ACPI: UEFI 0x0000000079A8DD08 000042 (v01 Cisco  CiscoUCS 01072009      00000000)
ACPI: HPET 0x0000000079A8DD50 000038 (v01 Cisco  CiscoUCS 00000001 INTL 20091013)
ACPI: MSCT 0x0000000079A8DD88 000090 (v01 Cisco  CiscoUCS 00000001 INTL 20091013)
ACPI: SLIT 0x0000000079A8DE18 000030 (v01 Cisco  CiscoUCS 00000001 INTL 20091013)
ACPI: SRAT 0x0000000079A8DE48 001158 (v03 Cisco  CiscoUCS 00000001 INTL 20091013)
ACPI: WDDT 0x0000000079A8EFA0 000040 (v01 Cisco  CiscoUCS 00000000 INTL 20091013)
ACPI: SSDT 0x0000000079A8EFE0 017141 (v02 Cisco  PmMgt    00000002 INTL 20120913)
ACPI: SSDT 0x0000000079AA6128 0028AA (v02 Cisco  SpsNm    00000002 INTL 20120913)
ACPI: SSDT 0x0000000079AA89D8 000064 (v02 Cisco  SpsNvs   00000002 INTL 20120913)
ACPI: PRAD 0x0000000079AA8A40 000102 (v02 Cisco  CiscoUCS 00000002 INTL 20120913)
ACPI: DMAR 0x0000000079AA8B48 0000E8 (v01 Cisco  CiscoUCS 00000001 INTL 20091013)
ACPI: HEST 0x0000000079AA8C30 0000A8 (v01 Cisco  CiscoUCS 00000001 INTL 00000001)
ACPI: BERT 0x0000000079AA8CD8 000030 (v01 Cisco  CiscoUCS 00000001 INTL 00000001)
ACPI: ERST 0x0000000079AA8D08 000230 (v01 Cisco  CiscoUCS 00000001 INTL 00000001)
ACPI: EINJ 0x0000000079AA8F38 000130 (v01 Cisco  CiscoUCS 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
NUMA turned off
Faking a node at [mem 0x0000000000000000-0x000000607fffffff]
NODE_DATA(0) allocated [mem 0x607ffd7000-0x607fffdfff]
Reserving 128MB of memory at 720MB for crashkernel (System RAM: 393106MB)
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000607fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x0000000079266fff]
  node   0: [mem 0x0000000100000000-0x000000607fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000607fffffff]
On node 0 totalpages: 100635140
  DMA zone: 64 pages used for memmap
  DMA zone: 22 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 7690 pages used for memmap
  DMA32 zone: 492135 pages, LIFO batch:31
  Normal zone: 1564672 pages used for memmap
  Normal zone: 100139008 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
IOAPIC[2]: apic_id 10, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x79267000-0x79a47fff]
PM: Registered nosave memory: [mem 0x79a48000-0x79aa9fff]
PM: Registered nosave memory: [mem 0x79aaa000-0x79fdcfff]
PM: Registered nosave memory: [mem 0x79fdd000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 35 pages/cpu @ffff885eff200000 s104536 r8192 d30632 u262144
pcpu-alloc: s104536 r8192 d30632 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 99062692
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/PQ00-root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=PQ01/swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=PQ00/root  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet numa=off transparent_hugepage=never
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Memory: 395989340K/402540560K available (7165K kernel code, 1658K rwdata, 3868K rodata, 1996K init, 3020K bss, 6551220K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Kernel/User page tables isolation: enabled
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS:524544 nr_irqs:1368 16
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-15.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3491.814 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.62 BogoMIPS (lpj=3491814)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 67108864 (order: 17, 536870912 bytes)
Inode-cache hash table entries: 33554432 (order: 16, 268435456 bytes)
Mount-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mountpoint-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
FEATURE SPEC_CTRL Present
FEATURE IBPB Present
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Options: IBRS(basic) IBPB retpoline
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Spectre V2 : Enabling Restricted Speculation for firmware calls
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: MDS CPU bug present and SMT on, data leak possible. See  for more details.
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 28K (ffffffff81e5d000 - ffffffff81e64000)
ftrace: allocating 27467 entries in 108 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de
dmar: DRHD base: 0x000000c7ffc000 flags: 0x1
dmar: IOMMU 1: reg_base_addr c7ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de
dmar: RMRR base: 0x0000007bb77000 end: 0x0000007bb87fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000c7ffc000 proximity domain: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x1
IOAPIC id 10 under DRHD base  0xfbffc000 IOMMU 0
IOAPIC id 8 under DRHD base  0xc7ffc000 IOMMU 1
IOAPIC id 9 under DRHD base  0xc7ffc000 IOMMU 1
HPET id 0 under DRHD base 0xc7ffc000
x2apic is disabled because BIOS sets x2apic opt out bit. You can use 'intremap=no_x2apic_optout' to override the BIOS setting.
Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2637 v4 @ 3.50GHz (fam: 06, model: 4f, stepping: 01)
Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
microcode: CPU1 microcode updated early to revision 0xb000037, date = 2019-05-14
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  #2
microcode: CPU2 microcode updated early to revision 0xb000037, date = 2019-05-14
  #3[    0.273421] microcode: CPU3 microcode updated early to revision 0xb000037, date = 2019-05-14
  #4
microcode: CPU4 microcode updated early to revision 0xb000037, date = 2019-05-14
  #5
microcode: CPU5 microcode updated early to revision 0xb000037, date = 2019-05-14
  #6
microcode: CPU6 microcode updated early to revision 0xb000037, date = 2019-05-14
  #7
microcode: CPU7 microcode updated early to revision 0xb000037, date = 2019-05-14
  #8  #9 #10 #11 #12 #13 #14 #15
x86: Booted up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (111792.14 BogoMIPS)
devtmpfs: initialized
Using 2GB memory block size for large-memory system
PM: Registering ACPI NVS region [mem 0x79aaa000-0x79fdcfff] (5451776 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150410/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:02: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:6f80] type 00 class 0x088000
pci 0000:ff:08.2: [8086:6f32] type 00 class 0x110100
pci 0000:ff:08.3: [8086:6f83] type 00 class 0x088000
pci 0000:ff:09.0: [8086:6f90] type 00 class 0x088000
pci 0000:ff:09.2: [8086:6f33] type 00 class 0x110100
pci 0000:ff:09.3: [8086:6f93] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:08.0: [8086:6f80] type 00 class 0x088000
pci 0000:7f:08.2: [8086:6f32] type 00 class 0x110100
pci 0000:7f:08.3: [8086:6f83] type 00 class 0x088000
pci 0000:7f:09.0: [8086:6f90] type 00 class 0x088000
pci 0000:7f:09.2: [8086:6f33] type 00 class 0x110100
pci 0000:7f:09.3: [8086:6f93] type 00 class 0x088000
pci 0000:7f:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:7f:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:7f:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:7f:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:7f:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:7f:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:7f:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:7f:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:7f:0c.4: [8086:6fe4] type 00 class 0x088000
pci 0000:7f:0c.5: [8086:6fe5] type 00 class 0x088000
pci 0000:7f:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:7f:0f.1: [8086:6ff9] type 00 class 0x088000
pci 0000:7f:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:7f:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:7f:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:7f:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:7f:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:7f:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:7f:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:7f:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:7f:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:7f:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:7f:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:7f:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:7f:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:7f:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:7f:13.4: [8086:6fac] type 00 class 0x088000
pci 0000:7f:13.5: [8086:6fad] type 00 class 0x088000
pci 0000:7f:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:7f:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:7f:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:7f:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:7f:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:7f:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:7f:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:7f:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:7f:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:7f:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:7f:15.0: [8086:6fb4] type 00 class 0x088000
pci 0000:7f:15.1: [8086:6fb5] type 00 class 0x088000
pci 0000:7f:15.2: [8086:6fb6] type 00 class 0x088000
pci 0000:7f:15.3: [8086:6fb7] type 00 class 0x088000
pci 0000:7f:16.0: [8086:6f68] type 00 class 0x088000
pci 0000:7f:16.6: [8086:6f6e] type 00 class 0x088000
pci 0000:7f:16.7: [8086:6f6f] type 00 class 0x088000
pci 0000:7f:17.0: [8086:6fd0] type 00 class 0x088000
pci 0000:7f:17.4: [8086:6fb8] type 00 class 0x088000
pci 0000:7f:17.5: [8086:6fb9] type 00 class 0x088000
pci 0000:7f:17.6: [8086:6fba] type 00 class 0x088000
pci 0000:7f:17.7: [8086:6fbb] type 00 class 0x088000
pci 0000:7f:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:7f:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:7f:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:7f:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:7f:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:7f:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:7f:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7e]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x1000-0x7fff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff window]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xc7e17000-0xc7e17fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xc7e13000-0xc7e133ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:8d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc7e12000-0xc7e123ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
acpiphp: Slot [11] registered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1137:007a] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot
pci 0000:00:02.0: PCI bridge to [bus 02-07]
pci 0000:00:02.0:   bridge window [io  0x4000-0x5fff]
pci 0000:00:02.0:   bridge window [mem 0xc7900000-0xc7bfffff]
pci 0000:03:00.0: [1137:0041] type 01 class 0x060400
pci 0000:03:00.0: reg 0x10: [mem 0xc7b00000-0xc7b03fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-07]
pci 0000:02:00.0:   bridge window [io  0x4000-0x5fff]
pci 0000:02:00.0:   bridge window [mem 0xc7900000-0xc7bfffff]
pci 0000:04:00.0: [1137:0040] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04-07]
pci 0000:03:00.0:   bridge window [io  0x4000-0x5fff]
pci 0000:03:00.0:   bridge window [mem 0xc7900000-0xc7afffff]
pci 0000:05:00.0: [1137:0041] type 01 class 0x060400
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:01.0: [1137:0041] type 01 class 0x060400
pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PCI bridge to [bus 05-07]
pci 0000:04:00.0:   bridge window [io  0x4000-0x5fff]
pci 0000:04:00.0:   bridge window [mem 0xc7900000-0xc7afffff]
pci 0000:06:00.0: [1137:0043] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xc7a10000-0xc7a17fff 64bit]
pci 0000:06:00.0: reg 0x18: [mem 0xc7a18000-0xc7a19fff 64bit]
pci 0000:06:00.0: reg 0x20: [io  0x5000-0x507f]
pci 0000:06:00.0: reg 0x30: [mem 0xc7a00000-0xc7a0ffff pref]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0:   bridge window [io  0x5000-0x5fff]
pci 0000:05:00.0:   bridge window [mem 0xc7a00000-0xc7afffff]
pci 0000:07:00.0: [1137:0045] type 00 class 0x0c0400
pci 0000:07:00.0: reg 0x10: [mem 0xc7908000-0xc790ffff 64bit]
pci 0000:07:00.0: reg 0x18: [mem 0xc7910000-0xc7911fff 64bit]
pci 0000:07:00.0: reg 0x20: [io  0x4000-0x407f]
pci 0000:07:00.0: reg 0x30: [mem 0xc7900000-0xc7907fff pref]
pci 0000:05:01.0: PCI bridge to [bus 07]
pci 0000:05:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:05:01.0:   bridge window [mem 0xc7900000-0xc79fffff]
pci 0000:08:00.0: [1137:007a] type 01 class 0x060400
pci 0000:08:00.0: PME# supported from D0 D3hot
pci 0000:00:02.2: PCI bridge to [bus 08-0c]
pci 0000:00:02.2:   bridge window [io  0x6000-0x6fff]
pci 0000:00:02.2:   bridge window [mem 0xc7c00000-0xc7dfffff]
pci 0000:09:00.0: [1137:0041] type 01 class 0x060400
pci 0000:09:00.0: reg 0x10: [mem 0xc7d00000-0xc7d03fff 64bit]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PCI bridge to [bus 09-0c]
pci 0000:08:00.0:   bridge window [io  0x6000-0x6fff]
pci 0000:08:00.0:   bridge window [mem 0xc7c00000-0xc7dfffff]
pci 0000:0a:00.0: [1137:0040] type 01 class 0x060400
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
pci 0000:09:00.0:   bridge window [io  0x6000-0x6fff]
pci 0000:09:00.0:   bridge window [mem 0xc7c00000-0xc7cfffff]
pci 0000:0b:00.0: [1137:0041] type 01 class 0x060400
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.0: PCI bridge to [bus 0b-0c]
pci 0000:0a:00.0:   bridge window [io  0x6000-0x6fff]
pci 0000:0a:00.0:   bridge window [mem 0xc7c00000-0xc7cfffff]
pci 0000:0c:00.0: [1137:0045] type 00 class 0x0c0400
pci 0000:0c:00.0: reg 0x10: [mem 0xc7c08000-0xc7c0ffff 64bit]
pci 0000:0c:00.0: reg 0x18: [mem 0xc7c10000-0xc7c11fff 64bit]
pci 0000:0c:00.0: reg 0x20: [io  0x6000-0x607f]
pci 0000:0c:00.0: reg 0x30: [mem 0xc7c00000-0xc7c07fff pref]
pci 0000:0b:00.0: PCI bridge to [bus 0c]
pci 0000:0b:00.0:   bridge window [io  0x6000-0x6fff]
pci 0000:0b:00.0:   bridge window [mem 0xc7c00000-0xc7cfffff]
pci 0000:00:03.0: PCI bridge to [bus 0d]
pci 0000:00:1c.0: PCI bridge to [bus 0e]
pci 0000:0f:00.0: [102b:0522] type 00 class 0x030000
pci 0000:0f:00.0: reg 0x10: [mem 0xc6000000-0xc6ffffff]
pci 0000:0f:00.0: reg 0x14: [mem 0xc7810000-0xc7813fff]
pci 0000:0f:00.0: reg 0x18: [mem 0xc7000000-0xc77fffff]
pci 0000:0f:00.0: reg 0x30: [mem 0xc7800000-0xc780ffff pref]
pci 0000:0f:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.7: PCI bridge to [bus 0f]
pci 0000:00:1c.7:   bridge window [mem 0xc6000000-0xc78fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [bus 80-fe]
pci_bus 0000:80: root bus resource [io  0x8000-0xffff window]
pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff window]
pci 0000:80:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:80:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:80:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:80:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:80:05.4: reg 0x10: [mem 0xfbf00000-0xfbf00fff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:0f:00.0
vgaarb: device added: PCI:0000:0f:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0f:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0x79267000-0x7bffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
Switched to clocksource hpet
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io  0x0500-0x057f] has been reserved
system 00:01: [io  0x0400-0x047f] could not be reserved
system 00:01: [io  0x0580-0x059f] has been reserved
system 00:01: [io  0x0600-0x061f] has been reserved
system 00:01: [io  0x0880-0x0883] has been reserved
system 00:01: [io  0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: Plug and Play ACPI device, IDs IPI0001 (active)
pnp: PnP ACPI: found 5 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:ff:12.0: BAR 6: no space for [mem size 0x00000001 pref]
pci 0000:ff:12.0: BAR 6: failed to assign [mem size 0x00000001 pref]
pci 0000:ff:1e.3: BAR 6: no space for [mem size 0x00000001 pref]
pci 0000:ff:1e.3: BAR 6: failed to assign [mem size 0x00000001 pref]
pci 0000:7f:12.0: BAR 6: no space for [mem size 0x00000001 pref]
pci 0000:7f:12.0: BAR 6: failed to assign [mem size 0x00000001 pref]
pci 0000:7f:1e.3: BAR 6: no space for [mem size 0x00000001 pref]
pci 0000:7f:1e.3: BAR 6: failed to assign [mem size 0x00000001 pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0:   bridge window [io  0x5000-0x5fff]
pci 0000:05:00.0:   bridge window [mem 0xc7a00000-0xc7afffff]
pci 0000:05:01.0: PCI bridge to [bus 07]
pci 0000:05:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:05:01.0:   bridge window [mem 0xc7900000-0xc79fffff]
pci 0000:04:00.0: PCI bridge to [bus 05-07]
pci 0000:04:00.0:   bridge window [io  0x4000-0x5fff]
pci 0000:04:00.0:   bridge window [mem 0xc7900000-0xc7afffff]
pci 0000:03:00.0: PCI bridge to [bus 04-07]
pci 0000:03:00.0:   bridge window [io  0x4000-0x5fff]
pci 0000:03:00.0:   bridge window [mem 0xc7900000-0xc7afffff]
pci 0000:02:00.0: PCI bridge to [bus 03-07]
pci 0000:02:00.0:   bridge window [io  0x4000-0x5fff]
pci 0000:02:00.0:   bridge window [mem 0xc7900000-0xc7bfffff]
pci 0000:00:02.0: PCI bridge to [bus 02-07]
pci 0000:00:02.0:   bridge window [io  0x4000-0x5fff]
pci 0000:00:02.0:   bridge window [mem 0xc7900000-0xc7bfffff]
pci 0000:0b:00.0: PCI bridge to [bus 0c]
pci 0000:0b:00.0:   bridge window [io  0x6000-0x6fff]
pci 0000:0b:00.0:   bridge window [mem 0xc7c00000-0xc7cfffff]
pci 0000:0a:00.0: PCI bridge to [bus 0b-0c]
pci 0000:0a:00.0:   bridge window [io  0x6000-0x6fff]
pci 0000:0a:00.0:   bridge window [mem 0xc7c00000-0xc7cfffff]
pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
pci 0000:09:00.0:   bridge window [io  0x6000-0x6fff]
pci 0000:09:00.0:   bridge window [mem 0xc7c00000-0xc7cfffff]
pci 0000:08:00.0: PCI bridge to [bus 09-0c]
pci 0000:08:00.0:   bridge window [io  0x6000-0x6fff]
pci 0000:08:00.0:   bridge window [mem 0xc7c00000-0xc7dfffff]
pci 0000:00:02.2: PCI bridge to [bus 08-0c]
pci 0000:00:02.2:   bridge window [io  0x6000-0x6fff]
pci 0000:00:02.2:   bridge window [mem 0xc7c00000-0xc7dfffff]
pci 0000:00:03.0: PCI bridge to [bus 0d]
pci 0000:00:1c.0: PCI bridge to [bus 0e]
pci 0000:00:1c.7: PCI bridge to [bus 0f]
pci 0000:00:1c.7:   bridge window [mem 0xc6000000-0xc78fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x1000-0x7fff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xc7ffbfff window]
pci_bus 0000:02: resource 0 [io  0x4000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xc7900000-0xc7bfffff]
pci_bus 0000:03: resource 0 [io  0x4000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xc7900000-0xc7bfffff]
pci_bus 0000:04: resource 0 [io  0x4000-0x5fff]
pci_bus 0000:04: resource 1 [mem 0xc7900000-0xc7afffff]
pci_bus 0000:05: resource 0 [io  0x4000-0x5fff]
pci_bus 0000:05: resource 1 [mem 0xc7900000-0xc7afffff]
pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xc7a00000-0xc7afffff]
pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:07: resource 1 [mem 0xc7900000-0xc79fffff]
pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:08: resource 1 [mem 0xc7c00000-0xc7dfffff]
pci_bus 0000:09: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:09: resource 1 [mem 0xc7c00000-0xc7dfffff]
pci_bus 0000:0a: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:0a: resource 1 [mem 0xc7c00000-0xc7cfffff]
pci_bus 0000:0b: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:0b: resource 1 [mem 0xc7c00000-0xc7cfffff]
pci_bus 0000:0c: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:0c: resource 1 [mem 0xc7c00000-0xc7cfffff]
pci_bus 0000:0f: resource 1 [mem 0xc6000000-0xc78fffff]
pci_bus 0000:80: resource 4 [io  0x8000-0xffff window]
pci_bus 0000:80: resource 5 [mem 0xc8000000-0xfbffbfff window]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:0f:00.0: Video device with shadowed ROM
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 41892K (ffff880035707000 - ffff880037ff0000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x75267000-0x79267000] (64MB) mapped at [ffff880075267000-ffff880079266fff]
Intel CQM monitoring enabled
microcode: CPU0 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU1 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU2 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU3 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU4 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU5 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU6 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU7 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU8 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU9 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU10 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU11 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU12 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU13 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU14 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: CPU15 sig=0x406f1, pf=0x1, revision=0xb000037
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1572800415.133:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
page_owner is disabled
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:02.2:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:05:01.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pcieport 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:0b:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:0f:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x4F
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [P111] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
  MST::  : mst_init 1355: Mellanox Technologies Software Tools Driver - version 2.0.0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xc7e13000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.12-124.32.3.el6uek.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xc7e12000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.1.12-124.32.3.el6uek.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
tsc: Refined TSC clocksource calibration: 3491.914 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x32557ae966b, max_idle_ns: 440795369289 ns
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
gre: GRE over IPv4 demultiplexor driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Oracle America, Inc.: Ksplice Kernel Module Signing Key: 09010ebef5545fa7c54b626ef518e077b5b1ee4c'
Loaded X.509 cert 'Oracle Linux Kernel Module Signing Key: 2bb352412969a3653f0eb6021763408ebb9bb5ab'
Loaded X.509 cert 'Oracle Corporation: 7f559b8e9d9e05183480a7149e5a1de0bc265ada'
Loaded X.509 cert 'Oracle CA Server: a0ebae63b777670fce9dc880dd4c251594b9585a'
registered taskstats version 1
ima: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:00: setting system clock to 2019-11-03 17:00:17 UTC (1572800417)
Freeing unused kernel memory: 1996K (ffffffff81c6a000 - ffffffff81e5d000)
dracut: dracut-004-411.0.4.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
udev: starting version 147
device-mapper: multipath: version 1.9.0 loaded
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 1-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
hub 1-1:1.0: 6 ports detected
wmi: Mapper loaded
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 2-1.4: new full-speed USB device number 3 using ehci-pci
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
IPv6: Loaded, but administratively disabled, reboot required to enable
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.4
iscsi: registered transport (cxgb4i)
cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
iscsi: registered transport (bnx2i)
usb 2-1.4: New USB device found, idVendor=0624, idProduct=0402
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.4: Product: Cisco USB Composite Device-0
usb 2-1.4: Manufacturer: Avocent
usb 2-1.4: SerialNumber: 20111102-00000001
input: Avocent Cisco USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:0624:0402.0001/input/input2
iscsi: registered transport (be2iscsi)
In beiscsi_module_init, tt=ffffffffc02c1100
hid-generic 0003:0624:0402.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Cisco USB Composite Device-0] on usb-0000:00:1d.0-1.4/input0
input: Avocent Cisco USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:0624:0402.0002/input/input3
hid-generic 0003:0624:0402.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Cisco USB Composite Device-0] on usb-0000:00:1d.0-1.4/input1
input: Avocent Cisco USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:0624:0402.0003/input/input4
hid-generic 0003:0624:0402.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Cisco USB Composite Device-0] on usb-0000:00:1d.0-1.4/input2
enic: Cisco VIC Ethernet NIC Driver, ver 2.3.0.53
enic 0000:06:00.0: vNIC MAC addr 00:25:b5:a6:00:67 wq/rq 256/512 mtu 1500
enic 0000:06:00.0: vNIC csum tx/rx yes/yes tso/lro yes/yes rss no intr mode any type min timer 125 usec loopback tag 0x0000
enic 0000:06:00.0: vNIC resources avail: wq 1 rq 1 cq 2 intr 4
enic 0000:06:00.0: vNIC resources used:  wq 1 rq 1 cq 2 intr 4 intr mode MSI-X
fnic: Cisco FCoE HBA Driver, ver 1.6.0.34
fnic: Successfully Initialized Trace Buffer
fnic: Successfully Initialized FC_CTLR Trace Buffer
Switched to clocksource tsc
scsi host0: vNIC MAC addr 00:25:b5:a6:a4:ff wq/wq_copy/rq 64/512/64
scsi host0: vNIC node wwn 20000025b5a6054f port wwn 20000025b5a6a4ff
scsi host0: vNIC ed_tov 2000 ra_tov 10000
scsi host0: vNIC mtu 2048 intr timer 0
scsi host0: vNIC flags 0x8 luns per tgt 256
scsi host0: vNIC flogi_retries 8 flogi timeout 4000
scsi host0: vNIC plogi retries 8 plogi timeout 20000
scsi host0: vNIC io throttle count 256 link dn timeout 30000
scsi host0: vNIC port dn io retries 30 port dn timeout 30000
scsi host0: vNIC interrupt mode: MSI-X
scsi host0: vNIC resources avail: wq 2 cp_wq 1 raw_wq 1 rq 1 cq 3 intr 4
scsi host0: firmware uses non-FIP mode
scsi host0: fnic
scsi host1: vNIC MAC addr 00:25:b5:a6:b7:ff wq/wq_copy/rq 64/512/64
scsi host1: vNIC node wwn 20000025b5a6054f port wwn 20000025b5a6b7ff
scsi host1: vNIC ed_tov 2000 ra_tov 10000
scsi host1: vNIC mtu 2048 intr timer 0
scsi host1: vNIC flags 0x8 luns per tgt 256
scsi host1: vNIC flogi_retries 8 flogi timeout 4000
scsi host1: vNIC plogi retries 8 plogi timeout 20000
scsi host1: vNIC io throttle count 256 link dn timeout 30000
scsi host1: vNIC port dn io retries 30 port dn timeout 30000
scsi host1: vNIC interrupt mode: MSI-X
scsi host1: vNIC resources avail: wq 2 cp_wq 1 raw_wq 1 rq 1 cq 3 intr 4
scsi host1: firmware uses non-FIP mode
scsi host1: fnic
fnic: Resetting the read idx
host0: libfc: Link up on port (000000)
host0: Assigned Port ID 0403ba
scsi 0:0:0:1: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
scsi 0:0:0:2: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
scsi 0:0:1:1: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 0:0:0:1: [sda] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
sd 0:0:1:1: [sdc] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
sd 0:0:0:2: [sdb] 419430400 512-byte logical blocks: (214 GB/200 GiB)
scsi 0:0:1:2: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 0:0:0:1: [sda] Write Protect is off
sd 0:0:0:1: [sda] Mode Sense: 43 00 00 08
sd 0:0:1:2: [sdd] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 0:0:1:1: [sdc] Write Protect is off
sd 0:0:1:1: [sdc] Mode Sense: 43 00 00 08
sd 0:0:0:2: [sdb] Write Protect is off
sd 0:0:0:2: [sdb] Mode Sense: 43 00 00 08
sd 0:0:0:1: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:1: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:2: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:2: [sdd] Write Protect is off
sd 0:0:1:2: [sdd] Mode Sense: 43 00 00 08
sd 0:0:1:2: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc2
 sda: sda1 sda2
 sdb: sdb1
 sdd: sdd1
sd 0:0:1:1: [sdc] Attached SCSI disk
sd 0:0:0:1: [sda] Attached SCSI disk
sd 0:0:0:2: [sdb] Attached SCSI disk
sd 0:0:1:2: [sdd] Attached SCSI disk
host1: libfc: Link up on port (000000)
scsi 0:0:2:1: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 0:0:2:1: [sde] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
scsi 0:0:2:2: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 0:0:2:2: [sdf] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 0:0:2:1: [sde] Write Protect is off
sd 0:0:2:1: [sde] Mode Sense: 43 00 00 08
sd 0:0:2:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 0:0:3:1: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
host1: Assigned Port ID 0f033a
sd 0:0:3:1: [sdg] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
scsi 0:0:3:2: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 0:0:2:2: [sdf] Write Protect is off
sd 0:0:2:2: [sdf] Mode Sense: 43 00 00 08
sd 0:0:2:2: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:3:1: [sdg] Write Protect is off
sd 0:0:3:1: [sdg] Mode Sense: 43 00 00 08
sd 0:0:3:2: [sdh] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 0:0:3:1: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 0:0:4:1: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
 sde: sde1 sde2
sd 0:0:3:2: [sdh] Write Protect is off
sd 0:0:3:2: [sdh] Mode Sense: 43 00 00 08
sd 0:0:3:2: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:4:1: [sdi] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
scsi 0:0:4:2: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
 sdf: sdf1
sd 0:0:2:1: [sde] Attached SCSI disk
 sdg: sdg1 sdg2
sd 0:0:4:2: [sdj] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 0:0:4:1: [sdi] Write Protect is off
sd 0:0:4:1: [sdi] Mode Sense: 43 00 00 08
scsi 0:0:5:1: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 0:0:4:1: [sdi] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:1: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 1:0:0:1: [sdk] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
scsi 1:0:0:2: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
 sdh: sdh1
sd 0:0:2:2: [sdf] Attached SCSI disk
sd 1:0:0:2: [sdm] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 0:0:4:2: [sdj] Write Protect is off
sd 0:0:4:2: [sdj] Mode Sense: 43 00 00 08
sd 0:0:5:1: [sdl] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
sd 1:0:0:1: [sdk] Write Protect is off
sd 1:0:0:1: [sdk] Mode Sense: 43 00 00 08
scsi 0:0:5:2: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 1:0:0:1: [sdk] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:4:2: [sdj] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:3:1: [sdg] Attached SCSI disk
sd 1:0:0:2: [sdm] Write Protect is off
sd 1:0:0:2: [sdm] Mode Sense: 43 00 00 08
sd 1:0:0:2: [sdm] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdk: sdk1 sdk2
sd 0:0:5:2: [sdn] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 0:0:5:1: [sdl] Write Protect is off
sd 0:0:5:1: [sdl] Mode Sense: 43 00 00 08
 sdi: sdi1 sdi2
 sdm: sdm1
sd 0:0:5:1: [sdl] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:3:2: [sdh] Attached SCSI disk
sd 1:0:0:1: [sdk] Attached SCSI disk
sd 0:0:5:2: [sdn] Write Protect is off
sd 0:0:5:2: [sdn] Mode Sense: 43 00 00 08
sd 0:0:5:2: [sdn] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:2: [sdm] Attached SCSI disk
 sdj: sdj1
sd 0:0:4:1: [sdi] Attached SCSI disk
 sdl: sdl1 sdl2
sd 0:0:4:2: [sdj] Attached SCSI disk
device-mapper: multipath queue-length: version 0.1.0 loaded
 sdn: sdn1
sd 0:0:5:1: [sdl] Attached SCSI disk
sd 0:0:5:2: [sdn] Attached SCSI disk
scsi 1:0:1:1: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 1:0:1:1: [sdo] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
scsi 1:0:1:2: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 1:0:1:2: [sdp] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 1:0:1:1: [sdo] Write Protect is off
sd 1:0:1:1: [sdo] Mode Sense: 43 00 00 08
sd 1:0:1:1: [sdo] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:2:1: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 1:0:1:2: [sdp] Write Protect is off
sd 1:0:1:2: [sdp] Mode Sense: 43 00 00 08
sd 1:0:1:2: [sdp] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:2:1: [sdq] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
scsi 1:0:2:2: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 1:0:2:1: [sdq] Write Protect is off
sd 1:0:2:1: [sdq] Mode Sense: 43 00 00 08
sd 1:0:2:2: [sdr] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 1:0:2:1: [sdq] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdo: sdo1 sdo2
scsi 1:0:3:1: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
 sdp: sdp1
sd 1:0:2:2: [sdr] Write Protect is off
sd 1:0:2:2: [sdr] Mode Sense: 43 00 00 08
sd 1:0:2:2: [sdr] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:3:1: [sds] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
scsi 1:0:3:2: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 1:0:1:1: [sdo] Attached SCSI disk
 sdq: sdq1 sdq2
sd 1:0:3:2: [sdt] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 1:0:3:1: [sds] Write Protect is off
sd 1:0:3:1: [sds] Mode Sense: 43 00 00 08
scsi 1:0:4:1: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 1:0:3:1: [sds] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:1:2: [sdp] Attached SCSI disk
 sdr: sdr1
sd 1:0:3:2: [sdt] Write Protect is off
sd 1:0:3:2: [sdt] Mode Sense: 43 00 00 08
sd 1:0:4:1: [sdu] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
scsi 1:0:4:2: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 1:0:3:2: [sdt] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:2:1: [sdq] Attached SCSI disk
sd 1:0:4:2: [sdv] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 1:0:4:1: [sdu] Write Protect is off
sd 1:0:4:1: [sdu] Mode Sense: 43 00 00 08
sd 1:0:4:1: [sdu] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:2:2: [sdr] Attached SCSI disk
scsi 1:0:5:1: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
 sds: sds1 sds2
sd 1:0:4:2: [sdv] Write Protect is off
sd 1:0:4:2: [sdv] Mode Sense: 43 00 00 08
sd 1:0:4:2: [sdv] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:5:2: Direct-Access     PURE     FlashArray       8888 PQ: 0 ANSI: 6
sd 1:0:5:1: [sdw] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
 sdt: sdt1
sd 1:0:5:2: [sdx] 419430400 512-byte logical blocks: (214 GB/200 GiB)
 sdu: sdu1 sdu2
sd 1:0:5:1: [sdw] Write Protect is off
sd 1:0:5:1: [sdw] Mode Sense: 43 00 00 08
sd 1:0:5:1: [sdw] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:3:1: [sds] Attached SCSI disk
sd 1:0:3:2: [sdt] Attached SCSI disk
sd 1:0:5:2: [sdx] Write Protect is off
sd 1:0:5:2: [sdx] Mode Sense: 43 00 00 08
sd 1:0:5:2: [sdx] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdv: sdv1
sd 1:0:4:1: [sdu] Attached SCSI disk
 sdw: sdw1 sdw2
random: nonblocking pool is initialized
sd 1:0:4:2: [sdv] Attached SCSI disk
 sdx: sdx1
sd 1:0:5:1: [sdw] Attached SCSI disk
sd 1:0:5:2: [sdx] Attached SCSI disk
dracut: Scanning devices dm-2 dm-4  for LVM logical volumes PQ01/swap PQ00/root 
dracut: inactive '/dev/PQ00/root' [15.00 GiB] inherit
dracut: inactive '/dev/PQ00/home' [4.00 GiB] inherit
dracut: inactive '/dev/PQ01/swap' [16.00 GiB] inherit
dracut: inactive '/dev/PQ01/oracle' [20.00 GiB] inherit
dracut: inactive '/dev/PQ01/grid' [20.00 GiB] inherit
dracut: inactive '/dev/PQ01/orainventory' [4.00 GiB] inherit
dracut: inactive '/dev/PQ01/oradiag' [10.00 GiB] inherit
EXT4-fs (dm-6): INFO: recovery required on readonly filesystem
EXT4-fs (dm-6): write access will be enabled during recovery
EXT4-fs (dm-6): recovery complete
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/mapper/PQ00-root
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit: type=1404 audit(1572800422.008:2): selinux=0 auid=4294967295 ses=4294967295
dracut: 
dracut: Switching root
udev: starting version 147
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:04: [io  0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:04: Found new BMC (man_id: 0x00168b, prod_id: 0x0018, dev_id: 0x20)
ipmi_si 00:04: IPMI kcs interface initialized
ipmi device interface
sd 0:0:0:1: Attached scsi generic sg0 type 0
sd 0:0:0:2: Attached scsi generic sg1 type 0
sd 0:0:1:1: Attached scsi generic sg2 type 0
sd 0:0:1:2: Attached scsi generic sg3 type 0
sd 0:0:2:1: Attached scsi generic sg4 type 0
sd 0:0:2:2: Attached scsi generic sg5 type 0
sd 0:0:3:1: Attached scsi generic sg6 type 0
sd 0:0:3:2: Attached scsi generic sg7 type 0
sd 0:0:4:1: Attached scsi generic sg8 type 0
sd 0:0:4:2: Attached scsi generic sg9 type 0
sd 1:0:0:1: Attached scsi generic sg10 type 0
sd 0:0:5:1: Attached scsi generic sg11 type 0
sd 1:0:0:2: Attached scsi generic sg12 type 0
sd 0:0:5:2: Attached scsi generic sg13 type 0
sd 1:0:1:1: Attached scsi generic sg14 type 0
sd 1:0:1:2: Attached scsi generic sg15 type 0
sd 1:0:2:1: Attached scsi generic sg16 type 0
sd 1:0:2:2: Attached scsi generic sg17 type 0
sd 1:0:3:1: Attached scsi generic sg18 type 0
sd 1:0:3:2: Attached scsi generic sg19 type 0
sd 1:0:4:1: Attached scsi generic sg20 type 0
sd 1:0:4:2: Attached scsi generic sg21 type 0
sd 1:0:5:1: Attached scsi generic sg22 type 0
sd 1:0:5:2: Attached scsi generic sg23 type 0
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC MC0: Giving out device to module sbridge_edac.c controller Broadwell Socket#0: DEV 0000:ff:12.0 (POLLED)
EDAC MC1: Giving out device to module sbridge_edac.c controller Broadwell Socket#1: DEV 0000:7f:12.0 (POLLED)
EDAC sbridge:  Ver: 1.1.0 
input: PC Speaker as /devices/platform/pcspkr/input/input5
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
EXT4-fs (dm-6): re-mounted. Opts: (null)
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-11): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null)
Adding 16777212k swap on /dev/mapper/PQ01-swap.  Priority:-1 extents:1 across:16777212k SSFS
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
enic 0000:06:00.0 eth0: Link UP
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
enic 0000:06:00.0: vNIC resources used:  wq 1 rq 1 cq 2 intr 4 intr mode MSI-X
enic 0000:06:00.0 eth0: Link UP
enic 0000:06:00.0 eth0: Link UP
EXT4-fs (dm-8): resizing filesystem from 5242880 to 39313408 blocks
EXT4-fs (dm-8): resized filesystem to 39313408
EXT4-fs (dm-6): resizing filesystem from 3932160 to 11952128 blocks
EXT4-fs (dm-6): resized filesystem to 11952128
perf interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5088 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
python2 (28468): drop_caches: 3
python2 (28468): drop_caches: 3
python2 (28548): drop_caches: 3
python2 (28548): drop_caches: 3
python2 (28612): drop_caches: 3
python2 (28612): drop_caches: 3

Return To test1 System Information