dmesg - test5
Linux version 5.1.4-1-default (geeko@buildhost) (gcc version 8.3.1 20190226 [gcc-8-branch revision 269204] (SUSE Linux)) #1 SMP Wed May 22 11:11:40 UTC 2019 (0739fa4)
random: get_random_u32 called from bsp_init_amd+0x1df/0x270 with crng_init=0
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfd9ffff] usable
BIOS-e820: [mem 0x00000000bfda0000-0x00000000bfdd0fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfdd1000-0x00000000bfdfffff] ACPI data
BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000033fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-990XA-UD3/GA-990XA-UD3, BIOS F14e 09/09/2014
tsc: Fast TSC calibration using PIT
tsc: Detected 4419.663 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
last_pfn = 0x340000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BFE00000 mask FFFFFFE00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000340000000 aka 13312M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved
last_pfn = 0xbfda0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4be0-0x000f4bef]
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x22ae01000, 0x22ae01fff] PGTABLE
BRK [0x22ae02000, 0x22ae02fff] PGTABLE
BRK [0x22ae03000, 0x22ae03fff] PGTABLE
BRK [0x22ae04000, 0x22ae04fff] PGTABLE
BRK [0x22ae05000, 0x22ae05fff] PGTABLE
BRK [0x22ae06000, 0x22ae06fff] PGTABLE
RAMDISK: [mem 0x35ab3000-0x36d50fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6B00 000014 (v00 GBT )
ACPI: RSDT 0x00000000BFDD1000 000048 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000BFDD1080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000BFDD1100 007A4B (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 0x00000000BFDA0000 000040
ACPI: MSDM 0x00000000BFDD8C40 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 0x00000000BFDD8CC0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000BFDD8D00 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 0x00000000BFDD8D80 000740 (v01 GBT 00000000 00000000)
ACPI: MATS 0x00000000BFDD94C0 000034 (v01 GBT 00000000 00000000)
ACPI: TAMG 0x00000000BFDD9530 000182 (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 0x00000000BFDD8B80 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 0x00000000BFDD96C0 006209 (v01 MATS RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000033fffffff]
NODE_DATA(0) allocated [mem 0x33ffea000-0x33fffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000033fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000098fff]
node 0: [mem 0x0000000000100000-0x00000000bfd9ffff]
node 0: [mem 0x0000000100000000-0x000000033fffffff]
Zeroed struct page in unavailable ranges: 712 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000033fffffff]
On node 0 totalpages: 3145016
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3992 pages, LIFO batch:0
DMA32 zone: 12215 pages used for memmap
DMA32 zone: 781728 pages, LIFO batch:63
Normal zone: 36864 pages used for memmap
Normal zone: 2359296 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbfda0000-0xbfdd0fff]
PM: Registered nosave memory: [mem 0xbfdd1000-0xbfdfffff]
PM: Registered nosave memory: [mem 0xbfe00000-0xbfefffff]
PM: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[mem 0xbff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 47 pages/cpu s155648 r8192 d28672 u262144
pcpu-alloc: s155648 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 3095852
Policy zone: Normal
printk: log_buf_len individual max cpu contribution: 32768 bytes
printk: log_buf_len total cpu_extra contributions: 229376 bytes
printk: log_buf_len min size: 262144 bytes
printk: log_buf_len: 524288 bytes
printk: early log buf free: 252680(96%)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xb4000000-0xb5ffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
Memory: 3123732K/12580064K available (12291K kernel code, 1437K rwdata, 3660K rodata, 2136K init, 4924K bss, 380252K reserved, 0K cma-reserved)
ftrace: allocating 37028 entries in 145 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190215
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3fb4f466d99, max_idle_ns: 440795296159 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 8839.32 BogoMIPS (lpj=17678652)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Vulnerable
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
do_IRQ: 1.55 No irq handler for vector
#2
do_IRQ: 2.55 No irq handler for vector
#3
do_IRQ: 3.55 No irq handler for vector
#4
do_IRQ: 4.55 No irq handler for vector
#5
do_IRQ: 5.55 No irq handler for vector
#6
do_IRQ: 6.55 No irq handler for vector
#7
do_IRQ: 7.55 No irq handler for vector
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (70714.60 BogoMIPS)
node 0 initialised, 2269020 pages in 80ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbfda0000-0xbfdd0fff] (200704 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 19:41:22, date: 2019-05-30
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1559245281.136:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190215/dspkginit-440)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190215/dspkginit-440)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 9 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: enabling Extended Tags
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1002:5a17] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: enabling Extended Tags
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: enabling Extended Tags
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: enabling Extended Tags
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 0x24: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfdffe000-0xfdffefff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfdffd000-0xfdffd0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfdffc000-0xfdffcfff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfdffb000-0xfdffb0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfdffa000-0xfdffafff]
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: enabling Extended Tags
pci 0000:00:15.0: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfdff9000-0xfdff9fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfdff8000-0xfdff80ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:67df] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xdfe00000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xee00-0xeeff]
pci 0000:01:00.0: reg 0x24: [mem 0xfdd80000-0xfddbffff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfddfc000-0xfddfffff 64bit]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1b21:1080] type 01 class 0x060400
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 02-03]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:03.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:03: extended config space not accessible
pci 0000:03:04.0: [13f6:8788] type 00 class 0x040100
pci 0000:03:04.0: reg 0x10: [io 0xde00-0xdeff]
pci 0000:03:04.0: supports D1 D2
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:00.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:02:00.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfdaf8000-0xfdafffff 64bit]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 04]
pci 0000:00:04.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:04.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xbe00-0xbeff]
pci 0000:05:00.0: reg 0x18: [mem 0xfd3ff000-0xfd3fffff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xfd3f8000-0xfd3fbfff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:09.0: bridge window [mem 0xfd600000-0xfd6fffff]
pci 0000:00:09.0: bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfd2f8000-0xfd2fffff 64bit]
pci 0000:06:00.0: enabling Extended Tags
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 06]
pci 0000:00:0a.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0a.0: bridge window [mem 0xfd200000-0xfd2fffff]
pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:07: extended config space not accessible
pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
pci 0000:00:14.4: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 08]
pci 0000:00:15.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:15.0: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:15.0: bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00099800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfda0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0220-0x0225] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:01: [io 0x0900-0x091f] has been reserved
system 00:01: [io 0x0228-0x022f] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c52] has been reserved
system 00:01: [io 0x0c6c-0x0c6d] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x08fe] has been reserved
system 00:01: [io 0x0a10-0x0a17] has been reserved
system 00:01: [io 0x0b00-0x0b0f] has been reserved
system 00:01: [io 0x0b10-0x0b1f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0x000d5e00-0x000d7fff] has been reserved
system 00:04: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:04: [mem 0xbfda0000-0xbfdfffff] could not be reserved
system 00:04: [mem 0xffff0000-0xffffffff] has been reserved
system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:04: [mem 0x00100000-0xbfd9ffff] could not be reserved
system 00:04: [mem 0xbfe00000-0xbfefffff] has been reserved
system 00:04: [mem 0xbff00000-0xbfffffff] could not be reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:04: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:00.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:02:00.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02-03]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:03.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 04]
pci 0000:00:04.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:04.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:09.0: bridge window [mem 0xfd600000-0xfd6fffff]
pci 0000:00:09.0: bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 06]
pci 0000:00:0a.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0a.0: bridge window [mem 0xfd200000-0xfd2fffff]
pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 07]
pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
pci 0000:00:14.4: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff pref]
pci 0000:00:15.0: PCI bridge to [bus 08]
pci 0000:00:15.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:15.0: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:15.0: bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xfd600000-0xfd6fffff]
pci_bus 0000:05: resource 2 [mem 0xfd300000-0xfd3fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xa000-0xafff]
pci_bus 0000:06: resource 1 [mem 0xfd200000-0xfd2fffff]
pci_bus 0000:06: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:07: resource 1 [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:07: resource 2 [mem 0xfd700000-0xfd7fffff pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:07: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:07: resource 9 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:08: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:08: resource 1 [mem 0xfd500000-0xfd5fffff]
pci_bus 0000:08: resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x616 took 25149 usecs
pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x616 took 19257 usecs
pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x616 took 19259 usecs
pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x616 took 19458 usecs
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 19064K
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
amd_uncore: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=37 max_order=22 bucket_order=0
zbud: loaded
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff380 irq 19
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 10
Segment Routing with IPv6
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x06000852
microcode: CPU1: patch_level=0x06000852
microcode: CPU2: patch_level=0x06000852
microcode: CPU3: patch_level=0x06000852
microcode: CPU4: patch_level=0x06000852
microcode: CPU5: patch_level=0x06000852
microcode: CPU6: patch_level=0x06000852
microcode: CPU7: patch_level=0x06000852
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (2386025263, 3499751)->(3910741246, -1521216232)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'openSUSE Secure Boot Signkey: 0332fa9cbf0d88bf21924b0de82a09a54d5defc8'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 3:398:699
rtc_cmos 00:02: setting system clock to 2019-05-30T19:41:24 UTC (1559245284)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT02B6Q, max UDMA/133
ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: supports DRM functions and may not be fully accessible
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: configured for UDMA/133
ata2.00: disabling queued TRIM support
ata2.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM04B6Q, max UDMA/133
ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 4B6Q PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 860 2B6Q PQ: 0 ANSI: 5
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: Enabling discard_zeroes_data
sdb: sdb1 sdb2
sdc: sdc1 sdc2 sdc3 sdc4
sd 1:0:0:0: [sdb] supports TCG Opal
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdc] supports TCG Opal
sd 2:0:0:0: [sdc] Attached SCSI disk
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2136K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel image memory: 2012K
Freeing unused kernel image memory: 436K
Run /init as init process
systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
systemd[1]: systemd +suse.75.g9984a86d0d running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Socket.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on udev Kernel Socket.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Reached target Swap.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
alua: device handler registered
emc: device handler registered
rdac: device handler registered
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
tsc: Refined TSC clocksource calibration: 4419.912 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3fb5e03d639, max_idle_ns: 440795404310 ns
clocksource: Switched to clocksource tsc
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfdffd000
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
AMD-Vi: AMD IOMMUv2 functionality not available on this system
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.1.4-1-default ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.1.4-1-default xhci-hcd
usb usb2: SerialNumber: 0000:04:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.1.4-1-default xhci-hcd
usb usb3: SerialNumber: 0000:04:00.0
ehci-pci 0000:00:13.2: EHCI Host Controller
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 5.1.4-1-default ehci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.1.4-1-default xhci-hcd
usb usb5: SerialNumber: 0000:06:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:06:00.0: Host supports USB 3.0 SuperSpeed
ehci-pci 0000:00:16.2: EHCI Host Controller
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.1.4-1-default xhci-hcd
usb usb6: SerialNumber: 0000:06:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 5.1.4-1-default ehci_hcd
usb usb7: SerialNumber: 0000:00:16.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:12.0: irq 18, io mem 0xfdffe000
[drm] amdgpu kernel modesetting enabled.
CRAT table not found
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
amdgpu 0000:01:00.0: vgaarb: deactivate vga console
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1DA2:0xE366 0xE1).
[drm] register mmio base: 0xFDD80000
[drm] register mmio size: 262144
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
kfd kfd: skipped device 1002:67df, PCI rejects atomics
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than pnp 00:04 [mem 0x000d5e00-0x000d7fff]
caller pci_map_rom+0x6a/0x17d mapping multiple BARs
amdgpu 0000:01:00.0: No more image in the PCI ROM
ATOM BIOS: 113-4E3661U-X6I
[drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
amdgpu 0000:01:00.0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used)
amdgpu 0000:01:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[drm] Detected VRAM RAM=8192M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 6145728 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 8192M of VRAM memory ready
[drm] amdgpu: 8192M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400900000).
[drm] Chained IB support enabled!
[drm] Found UVD firmware Version: 1.130 Family ID: 16
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 5.1.4-1-default ohci_hcd
usb usb8: SerialNumber: 0000:00:12.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 909000
[drm] DM_PPLIB: 1134000
[drm] DM_PPLIB: 1266000
[drm] DM_PPLIB: 1365000
[drm] DM_PPLIB: 1432000
[drm] DM_PPLIB: 1490000
[drm] DM_PPLIB: 1560000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 156000
[drm] DM_PPLIB: memory_max_clock: 210000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 400000
[drm] DM_PPLIB: 1000000
[drm] DM_PPLIB: 2100000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 156000
[drm] DM_PPLIB: memory_max_clock: 210000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.2.17!
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 5.1.4-1-default ohci_hcd
usb usb9: SerialNumber: 0000:00:13.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: OHCI PCI host controller
usb usb10: Manufacturer: Linux 5.1.4-1-default ohci_hcd
usb usb10: SerialNumber: 0000:00:14.5
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
[drm] VCE initialized successfully.
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000
[drm] fb mappable at 0xC0E30000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.30.0 20150101 for 0000:01:00.0 on minor 0
usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: OHCI PCI host controller
usb usb11: Manufacturer: Linux 5.1.4-1-default ohci_hcd
usb usb11: SerialNumber: 0000:00:16.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 4 ports detected
EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null)
usb 7-4: new high-speed USB device number 2 using ehci-pci
usb 7-4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.52
usb 7-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 7-4: Product: USB2.0 Hub
hub 7-4:1.0: USB hub found
hub 7-4:1.0: 4 ports detected
systemd-journald[258]: Received SIGTERM from PID 1 (systemd).
printk: systemd: 23 output lines suppressed due to ratelimiting
systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
systemd[1]: systemd +suse.75.g9984a86d0d running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /usr/lib/systemd/system/auditd.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/auditd.pid → /run/auditd.pid; please update the unit file accordingly.
usb 9-3: new full-speed USB device number 2 using ohci-pci
usb 8-1: new full-speed USB device number 2 using ohci-pci
systemd[1]: /usr/lib/systemd/system/iscsiuio.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsiuio.pid → /run/iscsiuio.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/display-manager.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/displaymanager.pid → /run/displaymanager.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/rpc-statd.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/chronyd.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/chrony/chronyd.pid → /run/chrony/chronyd.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/pcscd.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly.
systemd[1]: initrd-switch-root.service: Succeeded.
usb 7-4.3: new full-speed USB device number 3 using ehci-pci
EXT4-fs (sdc4): re-mounted. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
audit: type=1400 audit(1559234486.346:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=555 comm="apparmor_parser"
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
audit: type=1400 audit(1559234486.370:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript" pid=577 comm="apparmor_parser"
audit: type=1400 audit(1559234486.370:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript///usr/bin/basename" pid=577 comm="apparmor_parser"
audit: type=1400 audit(1559234486.370:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript///usr/bin/dirname" pid=577 comm="apparmor_parser"
audit: type=1400 audit(1559234486.370:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript///usr/bin/hpijs" pid=577 comm="apparmor_parser"
audit: type=1400 audit(1559234486.370:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript//tempdir" pid=577 comm="apparmor_parser"
audit: type=1400 audit(1559234486.382:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=588 comm="apparmor_parser"
audit: type=1400 audit(1559234486.382:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=588 comm="apparmor_parser"
audit: type=1400 audit(1559234486.394:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=595 comm="apparmor_parser"
usb 9-3: New USB device found, idVendor=0951, idProduct=16dc, bcdDevice=21.18
usb 9-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-3: Product: HyperX Alloy FPS RGB
usb 9-3: Manufacturer: Kingston
usb 8-1: New USB device found, idVendor=0951, idProduct=16d7, bcdDevice=11.11
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: HyperX Pulsefire FPS Pro
usb 8-1: Manufacturer: Kingston Technology Company
usb 7-4.3: New USB device found, idVendor=1462, idProduct=3fa4, bcdDevice= 0.00
usb 7-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-4.3: Product: MSI Gaming Controller
usb 7-4.3: Manufacturer: MS
usb 7-4.3: SerialNumber: A02018011700
systemd-journald[509]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
usb 4-5: new high-speed USB device number 3 using ehci-pci
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20190215/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: PC Speaker as /devices/platform/pcspkr/input/input3
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
cryptd: max_cpu_qlen set to 1000
libphy: r8169: probed
r8169 0000:05:00.0 eth0: RTL8168evl/8111evl, 90:2b:34:14:8e:bd, XID 2c9, IRQ 33
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
r8169 0000:05:00.0 enp5s0: renamed from eth0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Kingston HyperX Alloy FPS RGB as /devices/pci0000:00/0000:00:13.0/usb9/9-3/9-3:1.0/0003:0951:16DC.0001/input/input4
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input5
hid-generic 0003:0951:16DC.0001: input,hidraw0: USB HID v1.11 Keyboard [Kingston HyperX Alloy FPS RGB] on usb-0000:00:13.0-3/input0
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
input: Kingston HyperX Alloy FPS RGB as /devices/pci0000:00/0000:00:13.0/usb9/9-3/9-3:1.1/0003:0951:16DC.0002/input/input11
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
usb 4-5: New USB device found, idVendor=046d, idProduct=0805, bcdDevice= 0.09
usb 4-5: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 4-5: SerialNumber: 14E49480
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
hid-generic 0003:0951:16DC.0002: input,hidraw1: USB HID v1.11 Keyboard [Kingston HyperX Alloy FPS RGB] on usb-0000:00:13.0-3/input1
input: Kingston HyperX Alloy FPS RGB Mouse as /devices/pci0000:00/0000:00:13.0/usb9/9-3/9-3:1.2/0003:0951:16DC.0003/input/input12
input: Kingston HyperX Alloy FPS RGB System Control as /devices/pci0000:00/0000:00:13.0/usb9/9-3/9-3:1.2/0003:0951:16DC.0003/input/input13
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
input: Kingston HyperX Alloy FPS RGB Consumer Control as /devices/pci0000:00/0000:00:13.0/usb9/9-3/9-3:1.2/0003:0951:16DC.0003/input/input14
input: Kingston HyperX Alloy FPS RGB Keyboard as /devices/pci0000:00/0000:00:13.0/usb9/9-3/9-3:1.2/0003:0951:16DC.0003/input/input16
hid-generic 0003:0951:16DC.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [Kingston HyperX Alloy FPS RGB] on usb-0000:00:13.0-3/input2
input: Kingston Technology Company HyperX Pulsefire FPS Pro as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.0/0003:0951:16D7.0004/input/input18
hid-generic 0003:0951:16D7.0004: input,hidraw3: USB HID v1.11 Mouse [Kingston Technology Company HyperX Pulsefire FPS Pro] on usb-0000:00:12.0-1/input0
input: Kingston Technology Company HyperX Pulsefire FPS Pro Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.1/0003:0951:16D7.0005/input/input19
input: Kingston Technology Company HyperX Pulsefire FPS Pro System Control as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.1/0003:0951:16D7.0005/input/input20
input: Kingston Technology Company HyperX Pulsefire FPS Pro Consumer Control as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.1/0003:0951:16D7.0005/input/input21
hid-generic 0003:0951:16D7.0005: input,hiddev97,hidraw4: USB HID v1.11 Keyboard [Kingston Technology Company HyperX Pulsefire FPS Pro] on usb-0000:00:12.0-1/input1
hid-generic 0003:0951:16D7.0006: hiddev98,hidraw5: USB HID v1.11 Device [Kingston Technology Company HyperX Pulsefire FPS Pro] on usb-0000:00:12.0-1/input2
input: MS MSI Gaming Controller as /devices/pci0000:00/0000:00:16.2/usb7/7-4/7-4.3/7-4.3:1.0/0003:1462:3FA4.0007/input/input23
hid-generic 0003:1462:3FA4.0007: input,hidraw6: USB HID v1.10 Device [MS MSI Gaming Controller] on usb-0000:00:16.2-4.3/input0
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
videodev: Linux video capture interface: v2.00
usb 4-5: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
usb 4-5: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device (046d:0805)
input: UVC Camera (046d:0805) as /devices/pci0000:00/0000:00:13.2/usb4/4-5/4-5:1.0/input/input24
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
No iBFT detected.
RTL8211E Gigabit Ethernet r8169-500:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-500:00, irq=IGNORE)
r8169 0000:05:00.0 enp5s0: Link is Down
r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx
NET: Registered protocol family 17
Loading iSCSI transport class v2.0-870.
NFSD: starting 90-second grace period (net f0000098)
fuse init (API version 7.29)
usb 4-5: reset high-speed USB device number 3 using ehci-pci