dmesg - apu2systemconfig

Return To apu2systemconfig System Information

Linux version 5.0.16-300.fc30.x86_64 (mockbuild@bkernel03.phx2.fedoraproject.org) (gcc version 9.1.1 20190503 (Red Hat 9.1.1-1) (GCC)) #1 SMP Tue May 14 19:33:09 UTC 2019
Command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.0.16-300.fc30.x86_64 root=/dev/mapper/fedora_tesseract-root ro resume=/dev/mapper/fedora_tesseract-swap rd.lvm.lv=fedora_tesseract/root rd.lvm.lv=fedora_tesseract/swap console=ttyS0,115200n8
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dffadfff] usable
BIOS-e820: [mem 0x00000000dffae000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017
tsc: Fast TSC calibration using PIT
tsc: Detected 998.072 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x11f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-back
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0080000000 mask FFC0000000 write-back
  2 base 00C0000000 mask FFE0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 base 00FF800000 mask FFFF800000 write-protect
  7 disabled
TOM2: 000000011f000000 aka 4592M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
last_pfn = 0xdffae max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4690-0x000f469f]
Using GB pages for direct mapping
BRK [0x116e01000, 0x116e01fff] PGTABLE
BRK [0x116e02000, 0x116e02fff] PGTABLE
BRK [0x116e03000, 0x116e03fff] PGTABLE
BRK [0x116e04000, 0x116e04fff] PGTABLE
BRK [0x116e05000, 0x116e05fff] PGTABLE
BRK [0x116e06000, 0x116e06fff] PGTABLE
BRK [0x116e07000, 0x116e07fff] PGTABLE
RAMDISK: [mem 0x35256000-0x36922fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F4840 000024 (v02 CORE  )
ACPI: XSDT 0x00000000DFFB80E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: FACP 0x00000000DFFB96F0 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: DSDT 0x00000000DFFB8250 001496 (v02 AMD    COREBOOT 00010001 INTL 20140114)
ACPI: FACS 0x00000000DFFB8210 000040
ACPI: SSDT 0x00000000DFFB97F0 000045 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
ACPI: APIC 0x00000000DFFB9840 00007E (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: HEST 0x00000000DFFB98C0 0001D0 (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: SSDT 0x00000000DFFB9A90 0048A6 (v02 AMD    AGESA    00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DFFBE340 0007C8 (v01 AMD    AGESA    00000001 AMD  00000001)
ACPI: HPET 0x00000000DFFBEB10 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011effffff]
NODE_DATA(0) allocated [mem 0x11efd5000-0x11effffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000011effffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000dffadfff]
  node   0: [mem 0x0000000100000000-0x000000011effffff]
Zeroed struct page in unavailable ranges: 180 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
On node 0 totalpages: 1044300
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 14271 pages used for memmap
  DMA32 zone: 913326 pages, LIFO batch:63
  Normal zone: 1984 pages used for memmap
  Normal zone: 126976 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x818
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdffae000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
random: get_random_bytes called from start_kernel+0x91/0x515 with crng_init=0
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u524288
pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists, mobility grouping on.  Total pages: 1027960
Policy zone: Normal
Kernel command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.0.16-300.fc30.x86_64 root=/dev/mapper/fedora_tesseract-root ro resume=/dev/mapper/fedora_tesseract-swap rd.lvm.lv=fedora_tesseract/root rd.lvm.lv=fedora_tesseract/swap console=ttyS0,115200n8
Memory: 3990400K/4177200K available (12291K kernel code, 1524K rwdata, 4028K rodata, 2204K init, 4688K bss, 186800K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 39076 entries in 153 pages
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
	Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 65792, nr_irqs: 1000, preallocated irqs: 16
Console: colour dummy device 80x25
printk: console [ttyS0] enabled
ACPI: Core revision 20181213
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cc5f3ad68c, max_idle_ns: 881590472205 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.14 BogoMIPS (lpj=998072)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux:  Initializing.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
mce: CPU supports 6 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD GX-412TC SOC (family: 0x16, model: 0x30, stepping: 0x1)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
do_IRQ: 1.55 No irq handler for vector
 #2
do_IRQ: 2.55 No irq handler for vector
 #3
do_IRQ: 3.55 No irq handler for vector
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (7984.57 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 15:54:46, date: 2019-05-22
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1558540485.136:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S2 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: host bridge window expanded to [io  0x0000-0x0cf7 window]; [io  0x03b0-0x03df window] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
pci 0000:00:02.2: enabling Extended Tags
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
pci 0000:00:02.3: enabling Extended Tags
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
pci 0000:00:02.4: enabling Extended Tags
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xfeb00000-0xfeb1ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xfe900000-0xfe9fffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xfeb24000-0xfeb24fff]
pci 0000:00:08.0: reg 0x20: [mem 0xfea00000-0xfeafffff]
pci 0000:00:08.0: reg 0x24: [mem 0xfeb20000-0xfeb21fff]
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb22000-0xfeb23fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io  0x4010-0x4017]
pci 0000:00:11.0: reg 0x14: [io  0x4020-0x4023]
pci 0000:00:11.0: reg 0x18: [io  0x4018-0x401f]
pci 0000:00:11.0: reg 0x1c: [io  0x4024-0x4027]
pci 0000:00:11.0: reg 0x20: [io  0x4000-0x400f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb25000-0xfeb253ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.0: reg 0x10: [mem 0xfeb25400-0xfeb254ff]
pci 0000:00:13.0: supports D1 D2
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xfeb25500-0xfeb255ff]
pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
pci 0000:01:00.0: [8086:157b] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xfe600000-0xfe61ffff]
pci 0000:01:00.0: reg 0x18: [io  0x1000-0x101f]
pci 0000:01:00.0: reg 0x1c: [mem 0xfe620000-0xfe623fff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2:   bridge window [io  0x1000-0x1fff]
pci 0000:00:02.2:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:02:00.0: [8086:157b] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xfe700000-0xfe71ffff]
pci 0000:02:00.0: reg 0x18: [io  0x2000-0x201f]
pci 0000:02:00.0: reg 0x1c: [mem 0xfe720000-0xfe723fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3:   bridge window [io  0x2000-0x2fff]
pci 0000:00:02.3:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:03:00.0: [8086:157b] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe81ffff]
pci 0000:03:00.0: reg 0x18: [io  0x3000-0x301f]
pci 0000:03:00.0: reg 0x1c: [mem 0xfe820000-0xfe823fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: PCI bridge to [bus 03]
pci 0000:00:02.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:02.4:   bridge window [mem 0xfe800000-0xfe8fffff]
ACPI: PCI Interrupt Link [INTA] (IRQs *3 5 7 10 11 12 15)
ACPI: PCI Interrupt Link [INTB] (IRQs *3 5 7 10 11 12 15)
ACPI: PCI Interrupt Link [INTC] (IRQs 3 *5 7 10 11 12 15)
ACPI: PCI Interrupt Link [INTD] (IRQs 3 5 *7 10 11 12 15)
ACPI: PCI Interrupt Link [INTE] (IRQs 3 5 7 10 *11 12 15)
ACPI: PCI Interrupt Link [INTF] (IRQs 3 5 7 *10 11 12 15)
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdffae000-0xdfffffff]
e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 3 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2:   bridge window [io  0x1000-0x1fff]
pci 0000:00:02.2:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3:   bridge window [io  0x2000-0x2fff]
pci 0000:00:02.3:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:02.4: PCI bridge to [bus 03]
pci 0000:00:02.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:02.4:   bridge window [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:13.0: PME# does not work under D3, disabling it
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 23348K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xdbfae000-0xdffae000] (64MB)
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
Platform Keyring initialized
tsc: Refined TSC clocksource calibration: 998.127 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc65b93289, max_idle_ns: 881590487074 ns
clocksource: Switched to clocksource tsc
alg: No test for 842 (842-generic)
alg: No test for 842 (842-scomp)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:02.2: Signaling PME with IRQ 25
pcieport 0000:00:02.3: Signaling PME with IRQ 27
pcieport 0000:00:02.4: Signaling PME with IRQ 29
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: Failed to enable APEI firmware first mode.
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part 
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb25000 port 0xfeb25100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb25000 port 0xfeb25180 irq 19
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:13.0: EHCI Host Controller
ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.0: debug port 2
ehci-pci 0000:00:13.0: irq 18, io mem 0xfeb25400
ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.0.16-300.fc30.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:13.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.0.16-300.fc30.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.0: Host supports USB 3.0  SuperSpeed
usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.0.16-300.fc30.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:00:10.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
ata2: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x07030105
microcode: CPU1: patch_level=0x07030105
microcode: CPU2: patch_level=0x07030105
microcode: CPU3: patch_level=0x07030105
microcode: Microcode Update Driver: v2.2.
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-10: SATA SSD, S9FM02.9, max UDMA/133
ata1.00: 31277232 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SATA SSD         02.9 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
sched_clock: Marking stable (6019015742, 638328534)->(6928933892, -271589616)
registered taskstats version 1
hub 1-1:1.0: USB hub found
Loading compiled-in X.509 certificates
hub 1-1:1.0: 4 ports detected
Loaded X.509 cert 'Fedora kernel signing key: 1b6fea36252d0ac22f82fd8516a7648794079dde'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
No architecture policies found
  Magic number: 3:130:943
tty tty0: hash matches
tty console: hash matches
rtc_cmos 00:01: setting system clock to 2019-05-22T15:54:51 UTC (1558540491)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2204K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel image memory: 2020K
Freeing unused kernel image memory: 68K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
Run /init as init process
systemd[1]: systemd v241-8.git9ef65cb.fc30 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Audit Socket.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Slices.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Socket.
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
audit: type=1130 audit(1558540494.662:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1558540495.740:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1558540496.150:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
dca service started, version 1.12.1
audit: type=1130 audit(1558540496.232:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
pps pps0: new PPS source ptp0
igb 0000:01:00.0: added PHC on eth0
igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:4a:e8:0c
sdhci: Secure Digital Host Controller Interface driver
igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
random: fast init done
pps pps1: new PPS source ptp1
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
igb 0000:02:00.0: added PHC on eth1
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:4a:e8:0d
igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
pps pps2: new PPS source ptp2
igb 0000:03:00.0: added PHC on eth2
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:4a:e8:0e
igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:01:00.0 enp1s0: renamed from eth0
igb 0000:02:00.0 enp2s0: renamed from eth1
igb 0000:03:00.0 enp3s0: renamed from eth2
audit: type=1130 audit(1558540498.043:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
PM: Image not found (code -22)
audit: type=1130 audit(1558540498.071:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-mapper-fedora_tesseract\x2dswap comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1558540498.071:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-mapper-fedora_tesseract\x2dswap comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1558540498.192:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1558540498.232:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
SGI XFS with ACLs, security attributes, scrub, no debug enabled
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Ending clean mount
audit: type=1130 audit(1558540499.840:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1558540499.840:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1558540500.224:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1558540500.297:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1558540500.331:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1558540500.358:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1558540500.389:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1558540500.416:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1558540500.440:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1558540500.462:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[283]: Received SIGTERM from PID 1 (systemd).
printk: systemd: 22 output lines suppressed due to ratelimiting
SELinux:  policy capability network_peer_controls=1
SELinux:  policy capability open_perms=1
SELinux:  policy capability extended_socket_class=1
SELinux:  policy capability always_check_network=0
SELinux:  policy capability cgroup_seclabel=1
SELinux:  policy capability nnp_nosuid_transition=1
systemd[1]: Successfully loaded SELinux policy in 1.664985s.
systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 213.049ms.
systemd[1]: systemd v241-8.git9ef65cb.fc30 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /usr/lib/systemd/system/gssproxy.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/gssproxy.pid → /run/gssproxy.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/rpc-statd.service:14: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/nfs-blkmap.service:10: PIDFile= references path below legacy directory /var/run/, updating /var/run/blkmapd.pid → /run/blkmapd.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/sssd.service:11: PIDFile= references path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/mdmonitor.service:6: PIDFile= references path below legacy directory /var/run/, updating /var/run/mdadm/mdadm.pid → /run/mdadm/mdadm.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/iscsiuio.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/iscsiuio.pid → /run/iscsiuio.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/iscsid.service:10: PIDFile= references path below legacy directory /var/run/, updating /var/run/iscsid.pid → /run/iscsid.pid; please update the unit file accordingly.
Adding 1564668k swap on /dev/mapper/fedora_tesseract-swap.  Priority:-2 extents:1 across:1564668k SSFS
kauditd_printk_skb: 26 callbacks suppressed
audit: type=1130 audit(1558540504.856:47): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1558540504.917:48): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1558540504.917:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1558540505.063:50): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1305 audit(1558540506.531:51): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:syslogd_t:s0 res=1
audit: type=1130 audit(1558540506.552:52): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[641]: Received request to flush runtime journal from PID 1
audit: type=1130 audit(1558540507.083:53): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1558540507.293:54): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
acpi_cpufreq: overriding BIOS provided _PSD data
ccp 0000:00:08.0: 5 command queues available
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
ccp 0000:00:08.0: ccp enabled
ccp 0000:00:08.0: enabled
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
audit: type=1130 audit(1558540508.379:55): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1558540508.483:56): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@8:2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC enabled.
EDAC amd64: F16h_M30h detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0:  4096MB 1:     0MB
EDAC amd64: MC: 2:     0MB 3:     0MB
EDAC amd64: MC: 4:     0MB 5:     0MB
EDAC amd64: MC: 6:     0MB 7:     0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0:     0MB 1:     0MB
EDAC amd64: MC: 2:     0MB 3:     0MB
EDAC amd64: MC: 4:     0MB 5:     0MB
EDAC amd64: MC: 6:     0MB 7:     0MB
EDAC amd64: using x4 syndromes.
EDAC amd64: MCT channel count: 1
EDAC MC0: Giving out device to module amd64_edac controller F16h_M30h: DEV 0000:00:18.3 (INTERRUPT)
EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
AMD64 EDAC driver v3.5.0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
kauditd_printk_skb: 6 callbacks suppressed
audit: type=1130 audit(1558540510.034:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1305 audit(1558540510.154:64): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
audit: type=1305 audit(1558540510.154:65): audit_pid=767 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
capability: warning: `zerotier-one' uses 32-bit capabilities (legacy support in use)
tun: Universal TUN/TAP device driver, 1.6
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
fbcon: Taking over console
perf: interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3176 > 3142), lowering kernel.perf_event_max_sample_rate to 62000
perf: interrupt took too long (4081 > 3970), lowering kernel.perf_event_max_sample_rate to 49000

Return To apu2systemconfig System Information