dmesg - test4
Linux version 4.12.5-300.fc26.i686+PAE (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 7.1.1 20170622 (Red Hat 7.1.1-3) (GCC) ) #1 SMP Mon Aug 7 15:58:11 UTC 2017
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f68ffff] usable
BIOS-e820: [mem 0x000000007f690000-0x000000007f69dfff] ACPI data
BIOS-e820: [mem 0x000000007f69e000-0x000000007f6dffff] ACPI NVS
BIOS-e820: [mem 0x000000007f6e0000-0x000000007f6fffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: ASUSTeK Computer INC. 1001PX/1001PX, BIOS 0601 04/30/2010
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7f690 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 080000000 write-back
1 base 07F700000 mask 0FFF00000 uncachable
2 base 07F800000 mask 0FF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
initial memory mapped: [mem 0x00000000-0x08dfffff]
Base memory trampoline at [c009b000] 9b000 size 16384
BRK [0x0894a000, 0x0894afff] PGTABLE
BRK [0x0894b000, 0x0894dfff] PGTABLE
BRK [0x0894e000, 0x0894efff] PGTABLE
BRK [0x0894f000, 0x0894ffff] PGTABLE
RAMDISK: [mem 0x3579e000-0x36bc6fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FBF40 000024 (v02 ACPIAM)
ACPI: XSDT 0x000000007F690100 00006C (v01 _ASUS_ Notebook 04001030 MSFT 00000097)
ACPI: FACP 0x000000007F690290 0000F4 (v04 A_M_I_ OEMFACP 04001030 MSFT 00000097)
ACPI: DSDT 0x000000007F690490 008BA0 (v02 A1591 A1591000 00000000 INTL 20060113)
ACPI: FACS 0x000000007F69E000 000040
ACPI: FACS 0x000000007F69E000 000040
ACPI: APIC 0x000000007F690390 00005C (v02 A_M_I_ OEMAPIC 04001030 MSFT 00000097)
ACPI: MCFG 0x000000007F6903F0 00003C (v01 A_M_I_ OEMMCFG 04001030 MSFT 00000097)
ACPI: ECDT 0x000000007F690430 000055 (v01 A_M_I_ OEMECDT 04001030 MSFT 00000097)
ACPI: OEMB 0x000000007F69E040 000061 (v01 A_M_I_ AMI_OEM 04001030 MSFT 00000097)
ACPI: HPET 0x000000007F699030 000038 (v01 A_M_I_ OEMHPET 04001030 MSFT 00000097)
ACPI: GSCI 0x000000007F69E0B0 002024 (v01 A_M_I_ GMCHSCI 04001030 MSFT 00000097)
ACPI: SSDT 0x000000007F6A0C80 0004F0 (v01 PmRef CpuPm 00003000 INTL 20060113)
ACPI: SLIC 0x000000007F699070 000176 (v01 _ASUS_ Notebook 04001030 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
1150MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
Normal [mem 0x0000000001000000-0x00000000377fdfff]
HighMem [mem 0x00000000377fe000-0x000000007f68ffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007f68ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007f68ffff]
On node 0 totalpages: 521774
free_area_init_node: node 0, pgdat c8735240, node_mem_map f43b2028
DMA zone: 40 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 2180 pages used for memmap
Normal zone: 223230 pages, LIFO batch:31
HighMem zone: 294546 pages, LIFO batch:31
Using APIC driver default
Reserving Intel graphics memory at 0x000000007f800000-0x000000007fffffff
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
e820: [mem 0x80000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:32 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
percpu: Embedded 21 pages/cpu @f77d0000 s57036 r0 d28980 u86016
pcpu-alloc: s57036 r0 d28980 u86016 alloc=21*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519554
Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.5-300.fc26.i686+PAE root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=es_MX.UTF-8
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0007f690)
Initializing Movable for node 0 (00000000:00000000)
Memory: 2031380K/2087096K available (7761K kernel code, 797K rwdata, 3080K rodata, 912K init, 640K bss, 55716K reserved, 0K cma-reserved, 1178184K highmem)
virtual kernel memory layout:
fixmap : 0xffa76000 - 0xfffff000 (5668 kB)
pkmap : 0xff800000 - 0xffa00000 (2048 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc8776000 - 0xc885a000 ( 912 kB)
.data : 0xc83947ca - 0xc87606c0 (3887 kB)
.text : 0xc7c00000 - 0xc83947ca (7761 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
ftrace: allocating 33291 entries in 66 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:2304 nr_irqs:440 16
CPU 0 irqstacks, hard=f70c2000 soft=f70c4000
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1666.427 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3332.85 BogoMIPS (lpj=1666427)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
Freeing SMP alternatives memory: 32K
smpboot: Max logical packages: 2
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz (family: 0x6, model: 0x1c, stepping: 0xa)
Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
CPU 1 irqstacks, hard=f718a000 soft=f718c000
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Initializing CPU#1
Disabled fast string operations
smp: Brought up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (6665.72 BogoMIPS)
sched_clock: Marking stable (91000000, 0)->(327779698, -236779698)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7f69e000-0x7f6dffff] (270336 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 19:19:00, date: 02/06/19
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \: Used as first EC
ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \: Used as boot ECDT EC to handle transactions
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000F7194C00 000326 (v01 PmRef Cpu0Ist 00003000 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000F700A800 000724 (v01 PmRef Cpu0Cst 00003001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000F7113CC0 0000AB (v01 PmRef Cpu1Ist 00003000 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000F7216300 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113)
ACPI : EC: EC stopped
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x7f700000-0xfed8ffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7e00000-0xf7e7ffff]
pci 0000:00:02.0: reg 0x14: [io 0xdc00-0xdc07]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xf7e80000-0xf7efffff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7cf8000-0xf7cfbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xd400-0xd41f]
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xd480-0xd49f]
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xd800-0xd81f]
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xd880-0xd89f]
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf7cf7c00-0xf7cf7fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xd080-0xd087]
pci 0000:00:1f.2: reg 0x14: [io 0xd000-0xd003]
pci 0000:00:1f.2: reg 0x18: [io 0xcc00-0xcc07]
pci 0000:00:1f.2: reg 0x1c: [io 0xc880-0xc883]
pci 0000:00:1f.2: reg 0x20: [io 0xc800-0xc80f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7cf7800-0xf7cf7bff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xfbff0000-0xfbffffff 64bit]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 02-03]
pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
pci 0000:01:00.0: [1969:1062] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xf7fc0000-0xf7ffffff 64bit]
pci 0000:01:00.0: reg 0x18: [io 0xec00-0xec7f]
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 01]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x7f700000-0xfed8ffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f690000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
system 00:04: [io 0x025c-0x025f] has been reserved
system 00:04: [io 0x0380-0x0383] has been reserved
system 00:04: [io 0x0400-0x041f] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x0800-0x087f] has been reserved
system 00:04: [io 0x0480-0x04bf] has been reserved
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:04: [mem 0xfff00000-0xffffffff] could not be reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0x7f6fffff] could not be reserved
system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02-03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 01]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:1c.3: bridge window [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0x7f700000-0xfed8ffff window]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0x80000000-0x801fffff]
pci_bus 0000:04: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:01: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:05: resource 8 [mem 0x7f700000-0xfed8ffff window]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 20644K
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1549480740.259:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=14 max_order=19 bucket_order=5
zbud: loaded
SELinux: Registering netfilter hooks
tsc: Refined TSC clocksource calibration: 1666.477 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x180573589cb, max_idle_ns: 440795224286 ns
clocksource: Switched to clocksource tsc
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
atomic64_test: passed for i586+ platform with CX8 and with SSE
pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
pcieport 0000:00:1c.1: enabling device (0106 -> 0107)
intel_idle: MWAIT substates: 0x20220
intel_idle: v0.4.1 model 0x1C
sched_clock: Marking unstable (3747016738, 12115343)regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by f4:9e:ef:53:cd:03
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
wlp2s0: deauthenticated from f4:9e:ef:53:cd:03 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: RX AssocResp from f4:9e:ef:53:cd:03 (capab=0x411 status=0 aid=6)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by f4:9e:ef:53:cd:03
tun: Universal TUN/TAP device driver, 1.6
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
wlp2s0: deauthenticating from f4:9e:ef:53:cd:03 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
PM: Hibernation mode set to 'suspend'
PM: Syncing filesystems ...
PM: done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
PM: Basic memory bitmaps created
PM: Preallocating image memory... done (allocated 189756 pages)
PM: Allocated 759024 kbytes in 0.82 seconds (925.63 MB/s)
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
PM: freeze of devices complete after 296.658 msecs
PM: late freeze of devices complete after 12.570 msecs
PM: noirq freeze of devices complete after 1.420 msecs
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
PM: Creating hibernation image:
PM: Need to copy 188932 pages
PM: Normal pages needed: 42986 + 1024, available pages: 184201
PM: Hibernation image created (188932 pages copied)
Suspended for 1.000 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
Disabled fast string operations
cache: parent cpu1 should not be sleeping
CPU1 is up
PM: noirq thaw of devices complete after 1.078 msecs
PM: early thaw of devices complete after 11.636 msecs
ath: phy0: ASPM enabled: 0x42
ACPI : button: The lid device is not compliant to SW_LID.
rtc_cmos 00:01: System wakeup disabled by ACPI
ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
PM: thaw of devices complete after 439.740 msecs
PM: Writing image.
PM: Using 1 thread(s) for compression.
PM: Compressing and saving image data (189117 pages)...
PM: Image saving progress: 0%
PM: Image saving progress: 10%
PM: Image saving progress: 20%
PM: Image saving progress: 30%
PM: Image saving progress: 40%
PM: Image saving progress: 50%
PM: Image saving progress: 60%
PM: Image saving progress: 70%
perf: interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
PM: Image saving progress: 80%
PM: Image saving progress: 90%
PM: Image saving progress: 100%
PM: Image saving done.
PM: Wrote 756468 kbytes in 12.90 seconds (58.64 MB/s)
PM: S
|
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 369.673 msecs
PM: suspend devices took 0.370 seconds
PM: late suspend of devices complete after 12.926 msecs
PM: noirq suspend of devices complete after 12.981 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: event blocked
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 3.069 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
cache: parent cpu1 should not be sleeping
CPU1 is up
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 12.937 msecs
PM: early resume of devices complete after 0.414 msecs
ACPI : EC: event unblocked
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
ath: phy0: ASPM enabled: 0x42
sd 0:0:0:0: [sda] Starting disk
rtc_cmos 00:01: System wakeup disabled by ACPI
usb 1-6: reset high-speed USB device number 2 using ehci-pci
PM: resume of devices complete after 973.727 msecs
PM: resume devices took 0.975 seconds
psmouse serio1: synaptics: queried max coordinates: x [..5808], y [..4842]
psmouse serio1: synaptics: hardware appears to be different: id(149271-149271), model(106673-106673), caps(d04733-d04731), ext(a40000-a40000).
psmouse serio1: synaptics: queried max coordinates: x [..5808], y [..4842]
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 570166
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
PM: Basic memory bitmaps freed
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: RX AssocResp from f4:9e:ef:53:cd:03 (capab=0x411 status=0 aid=6)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by f4:9e:ef:53:cd:03
fuse init (API version 7.26)
perf: interrupt took too long (3152 > 3140), lowering kernel.perf_event_max_sample_rate to 63000
rfkill: input handler disabled
perf: interrupt took too long (3950 > 3940), lowering kernel.perf_event_max_sample_rate to 50000
perf: interrupt took too long (4945 > 4937), lowering kernel.perf_event_max_sample_rate to 40000
perf: interrupt took too long (6196 > 6181), lowering kernel.perf_event_max_sample_rate to 32000
perf: interrupt took too long (7753 > 7745), lowering kernel.perf_event_max_sample_rate to 25000
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: authenticated
wlp2s0: associate with f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: RX AssocResp from f4:9e:ef:53:cd:03 (capab=0x411 status=0 aid=6)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by f4:9e:ef:53:cd:03
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
perf: interrupt took too long (9701 > 9691), lowering kernel.perf_event_max_sample_rate to 20000
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: authentication with f4:9e:ef:53:cd:03 timed out
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: authentication with f4:9e:ef:53:cd:03 timed out
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: authenticated
wlp2s0: associate with f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: associate with f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: associate with f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: association with f4:9e:ef:53:cd:03 timed out
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: aborting authentication with f4:9e:ef:53:cd:03 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: authentication with f4:9e:ef:53:cd:03 timed out
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: authentication with f4:9e:ef:53:cd:03 timed out
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: authentication with f4:9e:ef:53:cd:03 timed out
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: authentication with f4:9e:ef:53:cd:03 timed out
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: authentication with f4:9e:ef:53:cd:03 timed out
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: authenticated
wlp2s0: associate with f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: associate with f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: associate with f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: association with f4:9e:ef:53:cd:03 timed out
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: authentication with f4:9e:ef:53:cd:03 timed out
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: authentication with f4:9e:ef:53:cd:03 timed out
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: authentication with f4:9e:ef:53:cd:03 timed out
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: authentication with f4:9e:ef:53:cd:03 timed out
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: authentication with f4:9e:ef:53:cd:03 timed out
wlp2s0: authenticate with f4:9e:ef:53:cd:03
wlp2s0: send auth to f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with f4:9e:ef:53:cd:03 (try 1/3)
wlp2s0: associate with f4:9e:ef:53:cd:03 (try 2/3)
wlp2s0: associate with f4:9e:ef:53:cd:03 (try 3/3)
wlp2s0: RX AssocResp from f4:9e:ef:53:cd:03 (capab=0x411 status=0 aid=6)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by f4:9e:ef:53:cd:03
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready