dmesg - 5
Linux version 4.20.3-lp150.12.45-default (root@linux-xc5x) (gcc version 7.3.1 20180323 [gcc-7-branch revision 258812] (SUSE Linux)) #1 SMP Tue Jan 22 10:32:42 CST 2019
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000089e4ffff] usable
BIOS-e820: [mem 0x0000000089e50000-0x000000008a2b4fff] reserved
BIOS-e820: [mem 0x000000008a2b5000-0x000000008a39dfff] usable
BIOS-e820: [mem 0x000000008a39e000-0x000000008a550fff] ACPI NVS
BIOS-e820: [mem 0x000000008a551000-0x000000008ac0efff] reserved
BIOS-e820: [mem 0x000000008ac0f000-0x000000008ac0ffff] usable
BIOS-e820: [mem 0x000000008ac10000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000026bffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x82577018-0x82587e57] usable ==> usable
e820: update [mem 0x82577018-0x82587e57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000082577017] usable
reserve setup_data: [mem 0x0000000082577018-0x0000000082587e57] usable
reserve setup_data: [mem 0x0000000082587e58-0x0000000089e4ffff] usable
reserve setup_data: [mem 0x0000000089e50000-0x000000008a2b4fff] reserved
reserve setup_data: [mem 0x000000008a2b5000-0x000000008a39dfff] usable
reserve setup_data: [mem 0x000000008a39e000-0x000000008a550fff] ACPI NVS
reserve setup_data: [mem 0x000000008a551000-0x000000008ac0efff] reserved
reserve setup_data: [mem 0x000000008ac0f000-0x000000008ac0ffff] usable
reserve setup_data: [mem 0x000000008ac10000-0x000000008fffffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000026bffffff] usable
efi: EFI v2.70 by
efi: ACPI 2.0=0x8a3b1000 ACPI=0x8a3b1000 SMBIOS=0x8a991000 SMBIOS 3.0=0x8a990000 MEMATTR=0x88b92018 ESRT=0x88b94f98
SMBIOS 3.1.1 present.
DMI: Elo Touch Solutions Elo Z5/CoffeeLake, BIOS B191.25A 01/25/2019
tsc: Detected 2100.000 MHz processor
tsc: Detected 2112.000 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x26c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 00FF000000 mask 7FFF000000 write-protect
1 base 0000000000 mask 7F80000000 write-back
2 base 0080000000 mask 7FF0000000 write-back
3 base 0100000000 mask 7F00000000 write-back
4 base 0200000000 mask 7E00000000 write-back
5 base 008B800000 mask 7FFF800000 uncachable
6 base 008C000000 mask 7FFC000000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x8ac10 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x0000000088b94f98 to 0x0000000088b94fd0.
check: Scanning 1 areas for low memory corruption
Base memory trampoline at [(____ptrval____)] 98000 size 24576
Using GB pages for direct mapping
BRK [0x03601000, 0x03601fff] PGTABLE
BRK [0x03602000, 0x03602fff] PGTABLE
BRK [0x03603000, 0x03603fff] PGTABLE
BRK [0x03604000, 0x03604fff] PGTABLE
BRK [0x03605000, 0x03605fff] PGTABLE
BRK [0x03606000, 0x03606fff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x3f364000-0x3fffafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008A3B1000 000024 (v02 Elo )
ACPI: XSDT 0x000000008A3B10B0 0000DC (v01 Elo A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000008A3F1BD8 000114 (v06 Elo A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000008A3B1220 0409B6 (v02 Elo A M I 01072009 INTL 20160527)
ACPI: FACS 0x000000008A450080 000040
ACPI: APIC 0x000000008A3F1CF0 0000A0 (v04 Elo A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000008A3F1D90 000044 (v01 Elo A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000008A3F1DD8 00009C (v01 Elo A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000008A3F1E78 00003C (v01 Elo A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008A3F1EB8 000378 (v01 SataRe SataTabl 00001000 INTL 20160527)
ACPI: SSDT 0x000000008A3F2230 0017C6 (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x000000008A3F39F8 0031C6 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x000000008A3F6BC0 002358 (v02 PegSsd PegSsdt 00001000 INTL 20160527)
ACPI: HPET 0x000000008A3F8F18 000038 (v01 INTEL A M I 00000002 01000013)
ACPI: SSDT 0x000000008A3F8F50 000FAE (v02 INTEL Ther_Rvp 00001000 INTL 20160527)
ACPI: SSDT 0x000000008A3F9F00 00294F (v02 INTEL xh_cfsd4 00000000 INTL 20160527)
ACPI: UEFI 0x000000008A3FC850 000048 (v01 Elo A M I 00000002 01000013)
ACPI: LPIT 0x000000008A3FC898 00005C (v01 INTEL A M I 00000002 01000013)
ACPI: SSDT 0x000000008A3FC8F8 0027DE (v02 INTEL PtidDevc 00001000 INTL 20160527)
ACPI: SSDT 0x000000008A3FF0D8 0014E2 (v02 INTEL TbtTypeC 00000000 INTL 20160527)
ACPI: DBGP 0x000000008A4005C0 000034 (v01 Elo A M I 00000002 01000013)
ACPI: DBG2 0x000000008A4005F8 000054 (v00 Elo A M I 00000002 01000013)
ACPI: SSDT 0x000000008A400650 001B67 (v02 Elo UsbCTabl 00001000 INTL 20160527)
ACPI: SSDT 0x000000008A4021B8 000144 (v02 Intel ADebTabl 00001000 INTL 20160527)
ACPI: DMAR 0x000000008A402300 0000A8 (v01 INTEL EDK2 00000002 01000013)
ACPI: ASF! 0x000000008A4023A8 000074 (v32 Elo A M I 00000002 01000013)
ACPI: WSMT 0x000000008A402420 000028 (v01 Elo A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000026bffffff]
NODE_DATA(0) allocated [mem 0x26bfe8000-0x26bffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000026bffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x0000000089e4ffff]
node 0: [mem 0x000000008a2b5000-0x000000008a39dfff]
node 0: [mem 0x000000008ac0f000-0x000000008ac0ffff]
node 0: [mem 0x0000000100000000-0x000000026bffffff]
Zeroed struct page in unavailable ranges: 24872 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000026bffffff]
On node 0 totalpages: 2055896
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8765 pages used for memmap
DMA32 zone: 560954 pages, LIFO batch:63
Normal zone: 23296 pages used for memmap
Normal zone: 1490944 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 6 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x82577000-0x82577fff]
PM: Registered nosave memory: [mem 0x82587000-0x82587fff]
PM: Registered nosave memory: [mem 0x89e50000-0x8a2b4fff]
PM: Registered nosave memory: [mem 0x8a39e000-0x8a550fff]
PM: Registered nosave memory: [mem 0x8a551000-0x8ac0efff]
PM: Registered nosave memory: [mem 0x8ac10000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x94/0x4b6 with crng_init=0
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
percpu: Embedded 47 pages/cpu @(____ptrval____) s155648 r8192 d28672 u262144
pcpu-alloc: s155648 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists, mobility grouping on. Total pages: 2023749
Policy zone: Normal
printk: log_buf_len individual max cpu contribution: 32768 bytes
printk: log_buf_len total cpu_extra contributions: 163840 bytes
printk: log_buf_len min size: 262144 bytes
printk: log_buf_len: 524288 bytes
printk: early log buf free: 247560(94%)
Memory: 2233940K/8223584K available (12293K kernel code, 1393K rwdata, 3544K rodata, 2116K init, 13448K bss, 290336K reserved, 0K cma-reserved)
Kernel/User page tables isolation: enabled
ftrace: allocating 35777 entries in 140 pages
rcu: Hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
NR_IRQS: 33024, nr_irqs: 1536, preallocated irqs: 16
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20181003
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000008a724000 end: 0x0000008a96dfff
DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e71785e5dd, max_idle_ns: 440795244814 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4224.00 BogoMIPS (lpj=8448000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 12 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 32K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-8500T CPU @ 2.10GHz (family: 0x6, model: 0x9e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5
smp: Brought up 1 node, 6 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 6 processors activated (25344.00 BogoMIPS)
node 0 initialised, 1424827 pages in 60ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x8a39e000-0x8a550fff] (1781760 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 6:12:47, date: 02/01/19
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1549001567.104:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: 11 ACPI AML tables successfully acquired and loaded
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88826358F800 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888263BE5000 000567 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888263592200 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888263BE5800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888106BB8000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88826358F400 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888107D50C00 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.DFEC: Used as first EC
ACPI: \_SB_.PCI0.LPCB.DFEC: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.DFEC: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: Power Resource [PIN] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3e92] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xa1240000-0xa1240fff 64bit]
pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0xa123f000-0xa123ffff 64bit]
pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xa1220000-0xa122ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0xa1236000-0xa1237fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0xa123e000-0xa123efff 64bit]
pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000
pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xa123c000-0xa123cfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:16.3: [8086:a363] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x30a0-0x30a7]
pci 0000:00:16.3: reg 0x14: [mem 0xa123b000-0xa123bfff]
pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xa1234000-0xa1235fff]
pci 0000:00:17.0: reg 0x14: [mem 0xa123a000-0xa123a0ff]
pci 0000:00:17.0: reg 0x18: [io 0x3090-0x3097]
pci 0000:00:17.0: reg 0x1c: [io 0x3080-0x3083]
pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:17.0: reg 0x24: [mem 0xa1239000-0xa12397ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1d.0: [8086:a332] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
pci 0000:00:1f.0: [8086:a306] type 00 class 0x060100
pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xa1230000-0xa1233fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xa1238000-0xa12380ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:00:1f.6: [8086:15bb] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xa1200000-0xa121ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:2526] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xa1100000-0xa1103fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PCI bridge to [bus 02]
pci 0000:00:1d.0: bridge window [mem 0xa1100000-0xa11fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.DFEC: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.DFEC: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x82577018-0x83ffffff]
e820: reserve RAM buffer [mem 0x89e50000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8a39e000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8ac10000-0x8bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x1800-0x18fe] could not be reserved
system 00:04: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:04: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:04: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:04: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x2000-0x20fe] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:15.0: BAR 0: assigned [mem 0xa123d000-0xa123dfff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1d.0: PCI bridge to [bus 02]
pci 0000:00:1d.0: bridge window [mem 0xa1100000-0xa11fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 11 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 12 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 13 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:02: resource 1 [mem 0xa1100000-0xa11fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 12892K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x84b92000-0x88b92000] (64MB)
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e71785e5dd, max_idle_ns: 440795244814 ns
clocksource: Switched to clocksource tsc
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=37 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.0: Signaling PME with IRQ 122
pcieport 0000:00:1d.0: Signaling PME with IRQ 123
aer 0000:00:1d.0:pcie002: AER enabled with IRQ 123
dpc 0000:00:1d.0:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
efifb: probing for efifb
efifb: framebuffer at 0x90000000, using 1876k, total 1875k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
serial 0000:00:16.3: enabling device (0000 -> 0003)
0000:00:16.3: ttyS4 at I/O 0x30a0 (irq = 19, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
hidraw: raw HID events driver (C) Jiri Kosina
intel_pmc_core: initialized
NET: Registered protocol family 10
Segment Routing with IPv6
RAS: Correctable Errors collector initialized.
microcode: sig=0x906ea, pf=0x2, revision=0x96
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (2296589655, -3218764)->(2301200018, -7829127)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
page_owner is disabled
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
Magic number: 7:849:214
acpi device:65: hash matches
rtc_cmos 00:01: setting system clock to 2019-02-01 06:12:49 UTC (1549001569)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2116K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel image memory: 2016K
Freeing unused kernel image memory: 552K
Run /init as init process
systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on udev Kernel Socket.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice System Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Slices.
systemd[1]: Reached target Timers.
systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
systemd[1]: Reached target Swap.
alua: device handler registered
emc: device handler registered
rdac: device handler registered
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
ahci 0000:00:17.0: version 3.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.20.3-lp150.12.45-default xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.20.3-lp150.12.45-default xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xa1239000 port 0xa1239100 irq 124
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
checking generic (90000000 1d5000) vs hw (90000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[drm] Initialized i915 1.6.0 20180921 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input0
fbcon: inteldrmfb (fb0) is primary device
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-11: SanDisk SD9SN8W128G1122, X6104000, max UDMA/133
ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SanDisk SD9SN8W1 4000 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-2: new full-speed USB device number 2 using xhci_hcd
usb 1-2: New USB device found, idVendor=03eb, idProduct=8a6e, bcdDevice=10.34
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: Atmel maXTouch Digitizer
usb 1-2: Manufacturer: Atmel
usb 1-2: SerialNumber: D18R083987
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:03EB:8A6E.0001: hiddev96,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-2/input0
input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:03EB:8A6E.0002/input/input1
hid-generic 0003:03EB:8A6E.0002: input,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-2/input1
input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:03EB:8A6E.0003/input/input2
hid-generic 0003:03EB:8A6E.0003: input,hiddev97,hidraw2: USB HID v1.11 Pointer [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-2/input2
input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:03EB:8A6E.0002/input/input3
hid-multitouch 0003:03EB:8A6E.0002: input,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-2/input1
usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=0424, idProduct=5807, bcdDevice= 2.04
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB5807 Hub
usb 2-2: Manufacturer: Microchip
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 7 ports detected
usb 1-7: new high-speed USB device number 3 using xhci_hcd
usb 1-7: New USB device found, idVendor=0424, idProduct=2807, bcdDevice= 2.04
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: USB2807 Hub
usb 1-7: Manufacturer: Microchip
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 7 ports detected
usb 1-9: new full-speed USB device number 4 using xhci_hcd
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-9: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
PM: Image not found (code -22)
usb 1-7.1: new low-speed USB device number 5 using xhci_hcd
raid6: sse2x1 gen() 12220 MB/s
usb 1-7.1: New USB device found, idVendor=04f2, idProduct=0760, bcdDevice= 1.00
usb 1-7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7.1: Product: USB Keyboard
usb 1-7.1: Manufacturer: Chicony
raid6: sse2x1 xor() 8825 MB/s
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.1/1-7.1:1.0/0003:04F2:0760.0004/input/input4
hid-generic 0003:04F2:0760.0004: input,hidraw3: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:14.0-7.1/input0
input: Chicony USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.1/1-7.1:1.1/0003:04F2:0760.0005/input/input5
raid6: sse2x2 gen() 15364 MB/s
input: Chicony USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.1/1-7.1:1.1/0003:04F2:0760.0005/input/input6
hid-generic 0003:04F2:0760.0005: input,hiddev98,hidraw4: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:14.0-7.1/input1
raid6: sse2x2 xor() 10183 MB/s
raid6: sse2x4 gen() 18058 MB/s
usb 1-7.4: new high-speed USB device number 6 using xhci_hcd
raid6: sse2x4 xor() 11395 MB/s
usb 1-7.4: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
usb 1-7.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-7.4:1.0: USB hub found
hub 1-7.4:1.0: 4 ports detected
raid6: avx2x1 gen() 24870 MB/s
usb 1-7.6: new high-speed USB device number 7 using xhci_hcd
raid6: avx2x1 xor() 17166 MB/s
raid6: avx2x2 gen() 31543 MB/s
usb 1-7.6: New USB device found, idVendor=0781, idProduct=5571, bcdDevice= 1.00
usb 1-7.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7.6: Product: Cruzer Fit
usb 1-7.6: Manufacturer: SanDisk
usb 1-7.6: SerialNumber: 4C531001390419105552
usb-storage 1-7.6:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-7.6:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
raid6: avx2x2 xor() 18733 MB/s
usb 1-7.7: new full-speed USB device number 8 using xhci_hcd
raid6: avx2x4 gen() 34520 MB/s
raid6: avx2x4 xor() 20636 MB/s
raid6: using algorithm avx2x4 gen() 34520 MB/s
raid6: .... xor() 20636 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
usb 1-7.7: New USB device found, idVendor=04e2, idProduct=1422, bcdDevice= 0.02
usb 1-7.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7.7: Product: Exar USB UART
usb 1-7.7: Manufacturer: Exar Corp.
usb 1-7.7: SerialNumber: M305191232
Btrfs loaded, crc32c=crc32c-intel, assert=on
BTRFS: device fsid 52d3049b-dca4-49ee-a6cc-f62611e28c6f devid 1 transid 6337 /dev/sda3
BTRFS info (device sda3): disk space caching is enabled
BTRFS info (device sda3): has skinny extents
BTRFS info (device sda3): enabling ssd optimizations
usb 1-7.4.1: new low-speed USB device number 9 using xhci_hcd
usb 1-7.4.1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
usb 1-7.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7.4.1: Product: USB Optical Mouse
usb 1-7.4.1: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.1/1-7.4.1:1.0/0003:093A:2510.0006/input/input8
hid-generic 0003:093A:2510.0006: input,hidraw5: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-7.4.1/input0
usb 1-7.4.3: new full-speed USB device number 10 using xhci_hcd
systemd-journald[221]: Received SIGTERM from PID 1 (systemd).
printk: systemd: 16 output lines suppressed due to ratelimiting
usb 1-7.4.3: New USB device found, idVendor=04b8, idProduct=0e02, bcdDevice= 1.00
usb 1-7.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7.4.3: Product: TM-T88V
usb 1-7.4.3: Manufacturer: EPSON
usb 1-7.4.3: SerialNumber: 4E3346463351460000
BTRFS info (device sda3): disk space caching is enabled
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C09:01/PNP0C0D:00/input/input9
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
input: PC Speaker as /devices/platform/pcspkr/input/input13
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
cryptd: max_cpu_qlen set to 1000
iTCO_vendor_support: vendor-support=0
PTP clock support registered
cdc_acm 1-7.7:1.0: ttyACM0: USB ACM device
cdc_acm 1-7.7:1.2: ttyACM1: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
scsi 4:0:0:0: Direct-Access SanDisk Cruzer Fit 1.00 PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
idma64 idma64.0: Found Intel integrated DMA 64-bit
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
usblp 1-7.4.3:1.0: usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0E02
usbcore: registered new interface driver usblp
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff]
iTCO_wdt: probe of iTCO_wdt failed with error -16
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
Bluetooth: hci0: Device revision is 2
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
iwlwifi 0000:02:00.0: loaded firmware version 41.1f1e8d4a.0 op_mode iwlmvm
Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
iio iio:device0: registered accelerometer lng2dm
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 1c:ee:c9:04:10:f0
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 eth1: renamed from eth0
Adding 12582908k swap on /dev/sda2. Priority:-2 extents:1 across:12582908k SSFS
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 9260, REV=0x324
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
systemd-journald[458]: Received request to flush runtime journal from PID 1
iwlwifi 0000:02:00.0: base HW address: e4:70:b8:ff:de:35
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone3: failed to read out thermal zone (-61)
iwlwifi 0000:02:00.0 wlan1: renamed from wlan0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ppdev: user-space parallel port driver
usblp0: removed
usblp 1-7.4.3:1.0: usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0E02
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1402340 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 12702 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-18-16-1.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
iwlwifi 0000:02:00.0: BIOS contains WGDS but no WRDS
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
iwlwifi 0000:02:00.0: BIOS contains WGDS but no WRDS
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
NET: Registered protocol family 17
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
fuse init (API version 7.28)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
usblp0: removed
usblp 1-7.4.3:1.0: usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0E02
wlan1: authenticate with 74:d0:2b:dd:b3:d8
wlan1: send auth to 74:d0:2b:dd:b3:d8 (try 1/3)
wlan1: authenticated
wlan1: associate with 74:d0:2b:dd:b3:d8 (try 1/3)
wlan1: RX AssocResp from 74:d0:2b:dd:b3:d8 (capab=0x411 status=0 aid=3)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
traps: render_bench[2549] trap divide error ip:401f0c sp:7ffe301ab900 error:0 in render_bench[400000+5000]
traps: render_bench[2552] trap divide error ip:401f0c sp:7fffbdb345e0 error:0 in render_bench[400000+5000]
traps: render_bench[2555] trap divide error ip:401f0c sp:7ffeccfea7a0 error:0 in render_bench[400000+5000]
perf: interrupt took too long (2637 > 2500), lowering kernel.perf_event_max_sample_rate to 75750
perf: interrupt took too long (3305 > 3296), lowering kernel.perf_event_max_sample_rate to 60500
perf: interrupt took too long (4212 > 4131), lowering kernel.perf_event_max_sample_rate to 47250
perf: interrupt took too long (5363 > 5265), lowering kernel.perf_event_max_sample_rate to 37250
perf: interrupt took too long (6779 > 6703), lowering kernel.perf_event_max_sample_rate to 29500
BTRFS info (device sda3): qgroup scan completed (inconsistency flag cleared)