dmesg - RocGao-chess-2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-573.el6.x86_64 (mockbuild@x86-027.build.eng.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-16) (GCC) ) #1 SMP Wed Jul 1 18:23:37 EDT 2015
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000008d49c000 (usable)
BIOS-e820: 000000008d49c000 - 000000008d49d000 (ACPI NVS)
BIOS-e820: 000000008d49d000 - 000000008d6df000 (usable)
BIOS-e820: 000000008d6df000 - 000000008ef6a000 (reserved)
BIOS-e820: 000000008ef6a000 - 000000008ef9a000 (ACPI NVS)
BIOS-e820: 000000008ef9a000 - 000000008efe8000 (ACPI data)
BIOS-e820: 000000008efe8000 - 000000008f000000 (usable)
BIOS-e820: 000000008f000000 - 0000000090000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fd000000 - 00000000fe800000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed84000 - 00000000fed85000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff400000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000270000000 (usable)
DMI 2.8 present.
SMBIOS version 2.8 @ 0xFE300
DMI: Dell Inc. PowerEdge R230/0FRVY0, BIOS 2.2.3 08/17/2017
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x270000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
x2apic enabled by BIOS, switching to x2apic ops
last_pfn = 0x8f000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000008f000000
0000000000 - 0080000000 page 1G
0080000000 - 008f000000 page 2M
kernel direct mapping tables up to 8f000000 @ 8000-a000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000270000000
0100000000 - 0240000000 page 1G
0240000000 - 0270000000 page 2M
kernel direct mapping tables up to 270000000 @ 9000-b000
RAMDISK: 36548000 - 37fef2f6
ACPI: Deleted _OSI()
ACPI: Deleted _OSI()
ACPI: RSDP 00000000000fe320 00024 (v02 DELL )
ACPI: XSDT 000000008efbe188 000EC (v01 DELL PE_SC3 00000000 01000013)
ACPI: FACP 000000008efdf000 0010C (v05 DELL PE_SC3 00000000 DELL 00000001)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20090903/tbfadt-288)
ACPI: DSDT 000000008efcb000 0E6F5 (v02 DELL PE_SC3 00000000 INTL 20121114)
ACPI: FACS 000000008ef83000 00040
ACPI: BOOT 000000008efe5000 00028 (v01 INTEL TIANO 00000002 MSFT 01000013)
ACPI: SSDT 000000008efe1000 0387B (v02 SaSsdt SaSsdt 00003000 INTL 20121114)
ACPI: SLIC 000000008efe0000 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 000000008efde000 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: LPIT 000000008efdd000 00094 (v01 DELL PE_SC3 00000000 DELL 00000001)
ACPI: APIC 000000008efdc000 000BC (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 000000008efdb000 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WDAT 000000008efda000 00134 (v01 DELL PE_SC3 00000000 DELL 00000001)
ACPI: SSDT 000000008efca000 0019A (v02 DELL Sata0Ide 00001000 INTL 20121114)
ACPI: DBGP 000000008efc9000 00034 (v01 DELL 00000000 DELL 00000001)
ACPI: DBG2 000000008efc8000 00054 (v00 DELL 00000000 DELL 00000001)
ACPI: SSDT 000000008efc7000 006C3 (v01 DELL xh_rack0 00000000 INTL 20121114)
ACPI: SSDT 000000008efc6000 00E33 (v02 CpuRef CpuSsdt 00003000 INTL 20121114)
ACPI: SSDT 000000008efc5000 00365 (v02 PmRef Cpu0Tst 00003000 INTL 20121114)
ACPI: SSDT 000000008efc4000 003BF (v02 PmRef ApTst 00003000 INTL 20121114)
ACPI: DMAR 000000008efc3000 00070 (v01 INTEL GNLR 00000001 INTL 00000001)
ACPI: SSDT 000000008efc2000 006CE (v02 DELL PE_SC3 00000002 INTL 20121114)
ACPI: SSDT 000000008efc1000 0006E (v02 DELL PE_SC3 00000002 INTL 20121114)
ACPI: PRAD 000000008efc0000 00132 (v02 DELL PE_SC3 00000002 INTL 20121114)
ACPI: HEST 000000008efbf000 0017C (v01 DELL PE_SC3 00000002 DELL 00000001)
ACPI: BERT 000000008efe6000 00030 (v01 DELL PE_SC3 00000002 DELL 00000001)
ACPI: ERST 000000008efbd000 00230 (v01 DELL PE_SC3 00000002 DELL 00000001)
ACPI: EINJ 000000008efbc000 00130 (v01 DELL PE_SC3 00000002 DELL 00000001)
ACPI: FPDT 000000008efbb000 00044 (v01 DELL EDK2 00000002 01000013)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to cluster x2apic.
No NUMA configuration found
Faking a node at 0000000000000000-0000000270000000
Bootmem setup node 0 0000000000000000-0000000270000000
NODE_DATA [000000000000a000 - 000000000003dfff]
bootmap [000000000003e000 - 000000000008bfff] pages 4e
(8 early reservations) ==> bootmem [0000000000 - 0270000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000203cb24] TEXT DATA BSS ==> [0001000000 - 000203cb24]
#3 [0036548000 - 0037fef2f6] RAMDISK ==> [0036548000 - 0037fef2f6]
#4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
#5 [000203d000 - 000203d43d] BRK ==> [000203d000 - 000203d43d]
#6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
#7 [0000009000 - 000000a000] PGTABLE ==> [0000009000 - 000000a000]
Reserving 128MB of memory at 48MB for crashkernel (System RAM: 9984MB)
[ffffea0000000000-ffffea00089fffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00270000
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000001 -> 0x0000009d
0: 0x00000100 -> 0x0008d49c
0: 0x0008d49d -> 0x0008d6df
0: 0x0008efe8 -> 0x0008f000
0: 0x00100000 -> 0x00270000
On node 0 totalpages: 2086546
DMA zone: 56 pages used for memmap
DMA zone: 103 pages reserved
DMA zone: 3837 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 560942 pages, LIFO batch:31
Normal zone: 20608 pages used for memmap
Normal zone: 1486720 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to cluster x2apic.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000008d49c000 - 000000008d49d000
PM: Registered nosave memory: 000000008d6df000 - 000000008ef6a000
PM: Registered nosave memory: 000000008ef6a000 - 000000008ef9a000
PM: Registered nosave memory: 000000008ef9a000 - 000000008efe8000
PM: Registered nosave memory: 000000008f000000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fd000000
PM: Registered nosave memory: 00000000fd000000 - 00000000fe800000
PM: Registered nosave memory: 00000000fe800000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed84000
PM: Registered nosave memory: 00000000fed84000 - 00000000fed85000
PM: Registered nosave memory: 00000000fed85000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff400000
PM: Registered nosave memory: 00000000ff400000 - 0000000100000000
Allocating PCI resources starting at 90000000 (gap: 90000000:50000000)
Booting paravirtualized kernel on bare hardware
Detected CPU family 6 model 158
Warning: Intel CPU model - this hardware has not undergone testing by Red Hat and might not be certified. Please consult for certified hardware.
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91224 r8192 d23464 u262144
pcpu-alloc: s91224 r8192 d23464 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2051499
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
Memory: 7986932k/10223616k available (5394k kernel code, 1877432k absent, 359252k reserved, 7014k data, 1296k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: using HPET reference calibration
Detected 3000.004 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.00 BogoMIPS (lpj=3000004)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22127 entries in 87 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
dmar: RMRR base: 0x0000008eb68000 end: 0x0000008ef67fff
dmar: No ATSR found
IOAPIC id 2 under DRHD base 0xfed90000
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
APIC routing finalized to cluster x2apic.
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E3-1220 v6 @ 3.00GHz stepping 09
Performance Events: no PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (24000.03 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 8d49c000 (4096 bytes)
PM: Registering ACPI NVS region at 8ef6a000 (196608 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
PCI: Dell System detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Executed 4 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x90000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0x2000000000-0x2fffffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfd000000-0xfe7fffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0x2000000000-0x2fffffffff]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:14.0: reg 10: [mem 0x92c00000-0x92c0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:14.2: reg 10: [mem 0x2ffff03000-0x2ffff03fff 64bit]
pci 0000:00:16.0: reg 10: [mem 0x2ffff02000-0x2ffff02fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.1: reg 10: [mem 0x2ffff01000-0x2ffff01fff 64bit]
pci 0000:00:16.1: PME# supported from D3hot
pci 0000:00:16.1: PME# disabled
pci 0000:00:17.0: reg 10: [mem 0x92c14000-0x92c15fff]
pci 0000:00:17.0: reg 14: [mem 0x92c17000-0x92c170ff]
pci 0000:00:17.0: reg 18: [io 0x3040-0x3047]
pci 0000:00:17.0: reg 1c: [io 0x3048-0x304b]
pci 0000:00:17.0: reg 20: [io 0x3020-0x303f]
pci 0000:00:17.0: reg 24: [mem 0x92c16000-0x92c167ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:17.0: PME# disabled
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.2: PME# disabled
pci 0000:00:1f.2: reg 10: [mem 0x92c10000-0x92c13fff]
pci 0000:00:1f.4: reg 10: [mem 0x2ffff00000-0x2ffff000ff 64bit]
pci 0000:00:1f.4: reg 20: [io 0xefa0-0xefbf]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: reg 10: [mem 0x92a90000-0x92a9ffff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0x92aa0000-0x92aaffff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0x92ab0000-0x92abffff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10: [mem 0x92a60000-0x92a6ffff 64bit pref]
pci 0000:02:00.1: reg 18: [mem 0x92a70000-0x92a7ffff 64bit pref]
pci 0000:02:00.1: reg 20: [mem 0x92a80000-0x92a8ffff 64bit pref]
pci 0000:02:00.1: reg 30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:02:00.2: reg 10: [mem 0x92a30000-0x92a3ffff 64bit pref]
pci 0000:02:00.2: reg 18: [mem 0x92a40000-0x92a4ffff 64bit pref]
pci 0000:02:00.2: reg 20: [mem 0x92a50000-0x92a5ffff 64bit pref]
pci 0000:02:00.2: reg 30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
pci 0000:02:00.2: PME# disabled
pci 0000:02:00.3: reg 10: [mem 0x92a00000-0x92a0ffff 64bit pref]
pci 0000:02:00.3: reg 18: [mem 0x92a10000-0x92a1ffff 64bit pref]
pci 0000:02:00.3: reg 20: [mem 0x92a20000-0x92a2ffff 64bit pref]
pci 0000:02:00.3: reg 30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
pci 0000:02:00.3: PME# disabled
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:01.1: bridge window [mem 0x92a00000-0x92afffff 64bit pref]
pci 0000:03:00.0: reg 10: [mem 0x92b30000-0x92b3ffff 64bit pref]
pci 0000:03:00.0: reg 18: [mem 0x92b40000-0x92b4ffff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0x92b50000-0x92b5ffff 64bit pref]
pci 0000:03:00.0: reg 30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: reg 10: [mem 0x92b00000-0x92b0ffff 64bit pref]
pci 0000:03:00.1: reg 18: [mem 0x92b10000-0x92b1ffff 64bit pref]
pci 0000:03:00.1: reg 20: [mem 0x92b20000-0x92b2ffff 64bit pref]
pci 0000:03:00.1: reg 30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: PME# disabled
pci 0000:00:1d.0: PCI bridge to [bus 03-03]
pci 0000:00:1d.0: bridge window [mem 0x92b00000-0x92bfffff 64bit pref]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1d.2: PCI bridge to [bus 04-08]
pci 0000:00:1d.2: bridge window [mem 0x92000000-0x929fffff]
pci 0000:00:1d.2: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:04:00.0: PCI bridge to [bus 05-08]
pci 0000:04:00.0: bridge window [mem 0x92000000-0x929fffff]
pci 0000:04:00.0: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
pci 0000:05:00.0: PCI bridge to [bus 06-07]
pci 0000:05:00.0: bridge window [mem 0x92000000-0x928fffff]
pci 0000:05:00.0: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
pci 0000:07:00.0: reg 10: [mem 0x91000000-0x91ffffff pref]
pci 0000:07:00.0: reg 14: [mem 0x92800000-0x92803fff]
pci 0000:07:00.0: reg 18: [mem 0x92000000-0x927fffff]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [mem 0x92000000-0x928fffff]
pci 0000:06:00.0: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP09._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP11._PRT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 25, 26, 27, 28, 29, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
hpet: hpet2 irq 25 for MSI
hpet: hpet3 irq 26 for MSI
hpet: hpet4 irq 27 for MSI
hpet: hpet5 irq 28 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfd000000-0xfdabffff]
pnp 00:01: [mem 0xfdad0000-0xfdadffff]
pnp 00:01: [mem 0xfdb00000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfe01ffff]
pnp 00:01: [mem 0xfe036000-0xfe03bfff]
pnp 00:01: [mem 0xfe03d000-0xfe3fffff]
pnp 00:01: [mem 0xfe410000-0xfe7fffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x1800-0x18fe]
pnp 00:05: [io 0x164e-0x164f]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0800-0x087f]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0070-0x0077]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x1854-0x1857]
pnp 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:09: [io 0x02f8-0x02ff]
pnp 00:09: [irq 3]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io 0x03f8-0x03ff]
pnp 00:0a: [irq 4]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [io 0x0ca8]
pnp 00:0b: [io 0x0cac]
pnp 00:0b: [irq 10]
pnp 00:0b: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
pnp 00:0c: [mem 0xfed10000-0xfed17fff]
pnp 00:0c: [mem 0xfed18000-0xfed18fff]
pnp 00:0c: [mem 0xfed19000-0xfed19fff]
pnp 00:0c: [mem 0xe0000000-0xefffffff]
pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
pnp 00:0c: [mem 0xfed90000-0xfed93fff]
pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
pnp 00:0c: [mem 0xff000000-0xffffffff]
pnp 00:0c: [mem 0xfee00000-0xfeefffff]
pnp 00:0c: [mem 0x90000000-0x9001ffff]
pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:01: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:01: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:01: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:01: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:01: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x1800-0x18fe] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x1854-0x1857] has been reserved
system 00:0b: [io 0x0ca8] has been reserved
system 00:0b: [io 0x0cac] has been reserved
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:0c: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0x90000000-0x9001ffff] has been reserved
pci 0000:02:00.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:02:00.1: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:02:00.2: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:02:00.3: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:03:00.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:03:00.1: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:00:01.1: BAR 14: assigned [mem 0x90100000-0x901fffff]
pci 0000:00:1d.0: BAR 14: assigned [mem 0x90200000-0x902fffff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: BAR 6: assigned [mem 0x92ac0000-0x92afffff pref]
pci 0000:02:00.1: BAR 6: assigned [mem 0x90100000-0x9013ffff pref]
pci 0000:02:00.2: BAR 6: assigned [mem 0x90140000-0x9017ffff pref]
pci 0000:02:00.3: BAR 6: assigned [mem 0x90180000-0x901bffff pref]
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:01.1: bridge window [mem 0x90100000-0x901fffff]
pci 0000:00:01.1: bridge window [mem 0x92a00000-0x92afffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0x92b80000-0x92bbffff pref]
pci 0000:03:00.1: BAR 6: assigned [mem 0x92bc0000-0x92bfffff pref]
pci 0000:00:1d.0: PCI bridge to [bus 03-03]
pci 0000:00:1d.0: bridge window [mem 0x90200000-0x902fffff]
pci 0000:00:1d.0: bridge window [mem 0x92b00000-0x92bfffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [mem 0x92000000-0x928fffff]
pci 0000:06:00.0: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
pci 0000:05:00.0: PCI bridge to [bus 06-07]
pci 0000:05:00.0: bridge window [mem 0x92000000-0x928fffff]
pci 0000:05:00.0: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05-08]
pci 0000:04:00.0: bridge window [mem 0x92000000-0x929fffff]
pci 0000:04:00.0: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
pci 0000:00:1d.2: PCI bridge to [bus 04-08]
pci 0000:00:1d.2: bridge window [mem 0x92000000-0x929fffff]
pci 0000:00:1d.2: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.1: setting latency timer to 64
pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.0: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:05:00.0: setting latency timer to 64
pci 0000:06:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0x2000000000-0x2fffffffff]
pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff]
pci_bus 0000:02: resource 1 [mem 0x90100000-0x901fffff]
pci_bus 0000:02: resource 2 [mem 0x92a00000-0x92afffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0x90200000-0x902fffff]
pci_bus 0000:03: resource 2 [mem 0x92b00000-0x92bfffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0x92000000-0x929fffff]
pci_bus 0000:04: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0x92000000-0x929fffff]
pci_bus 0000:05: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0x92000000-0x928fffff]
pci_bus 0000:06: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0x92000000-0x928fffff]
pci_bus 0000:07: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:14.0: power state changed by ACPI to D0
pci 0000:00:14.0: power state changed by ACPI to D0
pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:14.0: PCI INT A disabled
pci 0000:07:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27292k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Simple Boot Flag at 0x36 set to 0x1
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1538129892.517:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15652
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key F26C4F8C5052F303
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
- Added public key CB445E0DA3EA1F65
- User ID: Red Hat Enterprise Linux Driver Update Program (key 4)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 30 for MSI/MSI-X
pcieport 0000:00:01.1: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.1: irq 31 for MSI/MSI-X
pcieport 0000:00:1d.0: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1d.0: irq 32 for MSI/MSI-X
pcieport 0000:00:1d.2: setting latency timer to 64
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1d.2: irq 33 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI: SSDT 000000008e310698 00648 (v02 PmRef Cpu0Ist 00003000 INTL 20121114)
ACPI: SSDT 000000008e30f618 005AA (v02 PmRef ApIst 00003000 INTL 20121114)
ACPI: \_PR_.CPU4: failed to get CPU APIC ID.
ACPI: \_PR_.CPU5: failed to get CPU APIC ID.
ACPI: \_PR_.CPU6: failed to get CPU APIC ID.
ACPI: \_PR_.CPU7: failed to get CPU APIC ID.
[Firmware Bug]: No valid trip found
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2018-09-28 10:18:14 UTC (1538129894)
Initalizing network drop monitor service
Freeing unused kernel memory: 1296k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 732k freed
Freeing unused kernel memory: 1576k freed
dracut: dracut-004-388.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ahci 0000:00:17.0: irq 34 for MSI/MSI-X
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems apst
ahci 0000:00:17.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0x92c16000 port 0x92c16100 irq 34
ata2: SATA max UDMA/133 abar m2048@0x92c16000 port 0x92c16180 irq 34
ata3: SATA max UDMA/133 abar m2048@0x92c16000 port 0x92c16200 irq 34
ata4: SATA max UDMA/133 abar m2048@0x92c16000 port 0x92c16280 irq 34
ata5: SATA max UDMA/133 abar m2048@0x92c16000 port 0x92c16300 irq 34
ata6: SATA max UDMA/133 abar m2048@0x92c16000 port 0x92c16380 irq 34
Refined TSC clocksource calibration: 2999.998 MHz.
Switching to clocksource tsc
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: WDC WD5003ABYX-18WERA0, 01.01S05, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5003ABYX-1 01.0 PQ: 0 ANSI: 5
ata5.00: ATAPI: PLDS DVD+/-RW DU-8A5LH, 6D51, max UDMA/133, ATAPI AN
ata5.00: configured for UDMA/133
scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DU-8A5LH 6D51 PQ: 0 ANSI: 5
xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:00:14.0: irq 35 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-573.el6.x86_64 xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-573.el6.x86_64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ACPI: WMI: Mapper loaded
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
usb 1-2: new low speed USB device number 2 using xhci_hcd
usb 1-2: New USB device found, idVendor=413c, idProduct=301a
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: Dell MS116 USB Optical Mouse
usb 1-2: Manufacturer: PixArt
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input3
generic-usb 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-2/input0
usb 1-3: new high speed USB device number 3 using xhci_hcd
usb 1-3: New USB device found, idVendor=413c, idProduct=a001
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: Gadget USB HUB
usb 1-3: Manufacturer: no manufacturer
usb 1-3: SerialNumber: 0123456789
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 6 ports detected
usb 1-4: new low speed USB device number 4 using xhci_hcd
usb 1-4: New USB device found, idVendor=1c4f, idProduct=0002
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Keykoard
usb 1-4: Manufacturer: USB
usb 1-4: configuration #1 chosen from 1 choice
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input4
generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:14.0-4/input0
drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
generic-usb 0003:1C4F:0002.0003: timeout initializing reports
input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/input/input5
generic-usb 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:14.0-4/input1
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda3
dracut: Loading SELinux policy
type=1404 audit(1538129906.597:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 304891 rules.
SELinux: 2048 avtab hash slots, 304891 rules.
SELinux: 9 users, 12 roles, 4199 types, 234 bools, 1 sens, 1024 cats
SELinux: 81 classes, 304891 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda3, type ext4), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1538129907.083:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.137 (May 11, 2014)
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:02:00.0: setting latency timer to 64
tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 00:0a:f7:b8:d2:3c
tg3 0000:02:00.0: eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:02:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
tg3 0000:02:00.1: setting latency timer to 64
tg3 0000:02:00.1: eth1: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 00:0a:f7:b8:d2:3d
tg3 0000:02:00.1: eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.1: eth1: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:02:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:02:00.2: setting latency timer to 64
tg3 0000:02:00.2: eth2: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 00:0a:f7:b8:d2:3e
tg3 0000:02:00.2: eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.2: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.2: eth2: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:02:00.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
tg3 0000:02:00.3: setting latency timer to 64
tg3 0000:02:00.3: eth3: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 00:0a:f7:b8:d2:3f
tg3 0000:02:00.3: eth3: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.3: eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.3: eth3: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:03:00.0: setting latency timer to 64
tg3 0000:03:00.0: eth4: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 50:9a:4c:71:9f:3b
tg3 0000:03:00.0: eth4: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.0: eth4: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.0: eth4: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
tg3 0000:03:00.1: setting latency timer to 64
tg3 0000:03:00.1: eth5: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 50:9a:4c:71:9f:3c
tg3 0000:03:00.1: eth5: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.1: eth5: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.1: eth5: dma_rwctrl[00000001] dma_mask[64-bit]
microcode: CPU0 sig=0x906e9, pf=0x2, revision=0x5e
platform microcode: firmware: requesting intel-ucode/06-9e-09
microcode: CPU1 sig=0x906e9, pf=0x2, revision=0x5e
platform microcode: firmware: requesting intel-ucode/06-9e-09
microcode: CPU2 sig=0x906e9, pf=0x2, revision=0x5e
platform microcode: firmware: requesting intel-ucode/06-9e-09
microcode: CPU3 sig=0x906e9, pf=0x2, revision=0x5e
platform microcode: firmware: requesting intel-ucode/06-9e-09
Microcode Update Driver: v2.00 , Peter Oruba
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 10
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 10
IRQ 10/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
ipmi_si ipmi_si.0: Using irq 10
ipmi_si ipmi_si.0: Couldn't set irq info: cc.
ipmi_si ipmi_si.0: Maybe ok, but ipmi might run very slowly.
udev: renamed network interface eth1 to p1p2
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
ACPI: No handler for Region [SYSI] (ffff88026cd84fa8) [IPMI]
power_meter ACPI000D:00: Found ACPI power meter.
udev: renamed network interface eth2 to p1p3
udev: renamed network interface eth4 to em1
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
ipmi device interface
udev: renamed network interface eth0 to p1p1
udev: renamed network interface eth5 to em2
udev: renamed network interface eth3 to p1p4
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda2, type ext4), uses xattr
Adding 16777212k swap on /dev/sda5. Priority:-1 extents:1 across:16777212k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.0: irq 36 for MSI/MSI-X
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.0: irq 37 for MSI/MSI-X
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.0: irq 38 for MSI/MSI-X
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.0: irq 39 for MSI/MSI-X
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.0: irq 40 for MSI/MSI-X
ADDRCONF(NETDEV_UP): em1: link is not ready
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.1: irq 41 for MSI/MSI-X
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.1: irq 42 for MSI/MSI-X
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.1: irq 43 for MSI/MSI-X
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.1: irq 44 for MSI/MSI-X
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.1: irq 45 for MSI/MSI-X
ADDRCONF(NETDEV_UP): em2: link is not ready
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.0: irq 46 for MSI/MSI-X
alloc irq_desc for 47 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.0: irq 47 for MSI/MSI-X
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.0: irq 48 for MSI/MSI-X
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.0: irq 49 for MSI/MSI-X
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.0: irq 50 for MSI/MSI-X
ADDRCONF(NETDEV_UP): p1p1: link is not ready
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.1: irq 51 for MSI/MSI-X
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.1: irq 52 for MSI/MSI-X
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.1: irq 53 for MSI/MSI-X
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.1: irq 54 for MSI/MSI-X
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.1: irq 55 for MSI/MSI-X
ADDRCONF(NETDEV_UP): p1p2: link is not ready
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.2: irq 56 for MSI/MSI-X
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.2: irq 57 for MSI/MSI-X
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.2: irq 58 for MSI/MSI-X
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.2: irq 59 for MSI/MSI-X
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.2: irq 60 for MSI/MSI-X
ADDRCONF(NETDEV_UP): p1p3: link is not ready
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.3: irq 61 for MSI/MSI-X
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.3: irq 62 for MSI/MSI-X
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.3: irq 63 for MSI/MSI-X
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.3: irq 64 for MSI/MSI-X
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:02:00.3: irq 65 for MSI/MSI-X
ADDRCONF(NETDEV_UP): p1p4: link is not ready
tg3 0000:02:00.3: p1p4: Link is up at 100 Mbps, full duplex
tg3 0000:02:00.3: p1p4: Flow control is on for TX and on for RX
tg3 0000:02:00.3: p1p4: EEE is disabled
ADDRCONF(NETDEV_CHANGE): p1p4: link becomes ready
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
p1p4: no IPv6 routers present
fuse init (API version 7.14)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
type=1400 audit(1538102689.663:4): avc: denied { getattr } for pid=7096 comm="gnome-clock-app" name="/" dev=sda3 ino=2 scontext=system_u:system_r:gnomeclock_t:s0-s0:c0.c1023 tcontext=system_u:object_r:fs_t:s0 tclass=filesystem
type=1400 audit(1538102689.735:5): avc: denied { getattr } for pid=7096 comm="gnome-clock-app" name="/" dev=sda3 ino=2 scontext=system_u:system_r:gnomeclock_t:s0-s0:c0.c1023 tcontext=system_u:object_r:fs_t:s0 tclass=filesystem