dmesg - 1
Linux version 4.18.8-xanmod5 (root@mascote) (gcc version 8.2.0 (Debian 8.2.0-6)) #1 SMP PREEMPT Sun Sep 16 11:37:35 -03 2018
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000de545fff] usable
BIOS-e820: [mem 0x00000000de546000-0x00000000de745fff] ACPI NVS
BIOS-e820: [mem 0x00000000de746000-0x00000000dfd3efff] usable
BIOS-e820: [mem 0x00000000dfd3f000-0x00000000dfdbefff] reserved
BIOS-e820: [mem 0x00000000dfdbf000-0x00000000dfebefff] ACPI NVS
BIOS-e820: [mem 0x00000000dfebf000-0x00000000dfef6fff] ACPI data
BIOS-e820: [mem 0x00000000dfef7000-0x00000000dfefffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000f8ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000010fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: TOSHIBA Satellite C650D/Portable PC, BIOS 1.80 06/28/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
last_pfn = 0x110000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DFEBE000 mask FFFFFFFFF000 uncachable
4 base 0000FFE00000 mask FFFFFFE00000 write-protect
5 base 000100000000 mask FFFFF0000000 write-back
6 disabled
7 disabled
TOM2: 0000000120000000 aka 4608M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xdff00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [(____ptrval____)] 99000 size 24576
Using GB pages for direct mapping
BRK [0x5856d000, 0x5856dfff] PGTABLE
BRK [0x5856e000, 0x5856efff] PGTABLE
BRK [0x5856f000, 0x5856ffff] PGTABLE
BRK [0x58570000, 0x58570fff] PGTABLE
BRK [0x58571000, 0x58571fff] PGTABLE
BRK [0x58572000, 0x58572fff] PGTABLE
BRK [0x58573000, 0x58573fff] PGTABLE
BRK [0x58574000, 0x58574fff] PGTABLE
BRK [0x58575000, 0x58575fff] PGTABLE
BRK [0x58576000, 0x58576fff] PGTABLE
RAMDISK: [mem 0x30b33000-0x34590fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 TOSINV)
ACPI: XSDT 0x00000000DFEF6120 00005C (v01 TOSINV TOSINV00 00000003 01000013)
ACPI: FACP 0x00000000DFEF5000 0000F4 (v04 TOSINV TOSINV00 00000003 MSFT 01000013)
ACPI: DSDT 0x00000000DFEE6000 00BAD7 (v01 TOSINV TOSINV00 F0000000 MSFT 01000013)
ACPI: FACS 0x00000000DFE9B000 000040
ACPI: FACS 0x00000000DFE9B000 000040
ACPI: HPET 0x00000000DFEF4000 000038 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: APIC 0x00000000DFEF3000 000084 (v02 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: MCFG 0x00000000DFEF2000 00003C (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: BOOT 0x00000000DFEE5000 000028 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: SLIC 0x00000000DFEE4000 000176 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: SSDT 0x00000000DFEE3000 000392 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000010fffffff]
NODE_DATA(0) allocated [mem 0x10ffd5000-0x10fffffff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000010fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000de545fff]
node 0: [mem 0x00000000de746000-0x00000000dfd3efff]
node 0: [mem 0x00000000dfef7000-0x00000000dfefffff]
node 0: [mem 0x0000000100000000-0x000000010fffffff]
Reserved but unavailable: 1306 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000010fffffff]
On node 0 totalpages: 981734
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14254 pages used for memmap
DMA32 zone: 912200 pages, LIFO batch:31
Normal zone: 1024 pages used for memmap
Normal zone: 65536 pages, LIFO batch:15
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x1002a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xde546000-0xde745fff]
PM: Registered nosave memory: [mem 0xdfd3f000-0xdfdbefff]
PM: Registered nosave memory: [mem 0xdfdbf000-0xdfebefff]
PM: Registered nosave memory: [mem 0xdfebf000-0xdfef6fff]
PM: Registered nosave memory: [mem 0xdff00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xf8ffffff]
PM: Registered nosave memory: [mem 0xf9000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[mem 0xdff00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3821924579961850 ns
random: get_random_bytes called from start_kernel+0x93/0x55f with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 47 pages/cpu @(____ptrval____) s155648 r8192 d28672 u524288
pcpu-alloc: s155648 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 966371
Policy zone: Normal
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xd4000000-0xd5ffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
Memory: 3640944K/3926936K available (12300K kernel code, 2996K rwdata, 4360K rodata, 2356K init, 2352K bss, 285992K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 40943 entries in 160 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU priority boosting: priority 1 delay 500 ms.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180531
TOSHIBA Satellite detected - force copy of DSDT to local memory
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 2094.633 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e316270a5e, max_idle_ns: 440795236664 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.26 BogoMIPS (lpj=4189266)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Freeing SMP alternatives memory: 36K
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU0
smpboot: CPU0: AMD Athlon(tm) II P320 Dual-Core Processor (family: 0x10, model: 0x6, stepping: 0x3)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
do_IRQ: 1.55 No irq handler for vector
process: Switch to broadcast mode on CPU1
smp: Brought up 1 node, 2 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 2 processors activated (8378.53 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xde546000-0xde745fff] (2097152 bytes)
PM: Registering ACPI NVS region [mem 0xdfdbf000-0xdfebefff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520892550000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 21:01:40, date: 09/17/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1537218100.086:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [0, ffffff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [mem 0xf8000000-0xfbffffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [f0000000, f20fffff]
node 0 link 0: mmio [f2100000, f22fffff]
node 0 link 0: mmio [f2300000, f7ffffff]
node 0 link 0: mmio [f8000000, fbffffff] ==> none
node 0 link 0: mmio [fc000000, febfffff]
node 0 link 0: mmio [fec00000, fffeffff]
node 0 link 0: mmio [ffff0000, ffffffff]
TOM2: 0000000120000000 aka 4608M
bus: [bus 00-1f] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xe0000000-0xf7ffffff]
bus: 00 [mem 0xfc000000-0xffffffff]
bus: 00 [mem 0x120000000-0xfcffffffff]
Simple Boot Flag at 0x44 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: MMCONFIG for 0000 [bus00-0f] at [mem 0xf8000000-0xf8ffffff] (base 0xf8000000) (size reduced!)
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Forced DSDT copy: length 0x0BAD7 copied locally, original unmapped
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
random: fast init done
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: Power Resource [PFA1] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0f] only partially covers this bridge
acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cefff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
pci 0000:00:04.0: enabling Extended Tags
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
pci 0000:00:05.0: enabling Extended Tags
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0x8038-0x803f]
pci 0000:00:11.0: reg 0x14: [io 0x804c-0x804f]
pci 0000:00:11.0: reg 0x18: [io 0x8030-0x8037]
pci 0000:00:11.0: reg 0x1c: [io 0x8048-0x804b]
pci 0000:00:11.0: reg 0x20: [io 0x8010-0x801f]
pci 0000:00:11.0: reg 0x24: [mem 0xf2307000-0xf23073ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xf2306000-0xf2306fff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xf2307600-0xf23076ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xf2305000-0xf2305fff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xf2307500-0xf23075ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf2300000-0xf2303fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060400
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xf2304000-0xf2304fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xf2307400-0xf23074ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci_bus 0000:01: extended config space not accessible
pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
pci 0000:01:05.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
pci 0000:01:05.0: reg 0x14: [io 0x7000-0x70ff]
pci 0000:01:05.0: reg 0x18: [mem 0xf2200000-0xf220ffff]
pci 0000:01:05.0: reg 0x24: [mem 0xf2100000-0xf21fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xf2100000-0xf22fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf1100000-0xf110ffff 64bit]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:04.0: PCI bridge to [bus 02-07]
pci 0000:00:04.0: bridge window [io 0x3000-0x6fff]
pci 0000:00:04.0: bridge window [mem 0xf1100000-0xf20fffff]
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
pci 0000:08:00.0: [1969:2060] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xf1000000-0xf103ffff 64bit]
pci 0000:08:00.0: reg 0x18: [io 0x2000-0x207f]
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 08]
pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:05.0: bridge window [mem 0xf1000000-0xf10fffff]
pci_bus 0000:09: extended config space not accessible
pci 0000:00:14.4: PCI bridge to [bus 09]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
pci 0000:01:05.0: vgaarb: setting as boot VGA device
pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:05.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xde546000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdfd3f000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdff00000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xf8000000-0xfbffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs TOS0100 SYN1900 SYN0002 PNP0f13 (active)
system 00:04: [io 0x0400-0x04cf] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0680-0x06ff] has been reserved
system 00:04: [io 0x077a] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cdb] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xffe00000-0xffffffff] has been reserved
system 00:05: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xf2100000-0xf22fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-07]
pci 0000:00:04.0: bridge window [io 0x3000-0x6fff]
pci 0000:00:04.0: bridge window [mem 0xf1100000-0xf20fffff]
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 08]
pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:05.0: bridge window [mem 0xf1000000-0xf10fffff]
pci 0000:00:14.4: PCI bridge to [bus 09]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xf2100000-0xf22fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x6fff]
pci_bus 0000:02: resource 1 [mem 0xf1100000-0xf20fffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:08: resource 1 [mem 0xf1000000-0xf10fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c3 took 65645 usecs
pci 0000:00:12.2: quirk_usb_early_handoff+0x0/0x6c3 took 13655 usecs
pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c3 took 66417 usecs
pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x6c3 took 13649 usecs
pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x6c3 took 66381 usecs
pci 0000:00:16.2: quirk_usb_early_handoff+0x0/0x6c3 took 13655 usecs
pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:08:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 59768K
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ d4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.27)
pstore: using deflate compression
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler noop registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
shpchp 0000:00:01.0: Requesting control of SHPC hotplug via OSHP (\_SB_.PCI0.AGP_)
shpchp 0000:00:01.0: Requesting control of SHPC hotplug via OSHP (\_SB_.PCI0)
shpchp 0000:00:01.0: Cannot get control of SHPC hotplug
shpchp 0000:00:14.4: Requesting control of SHPC hotplug via OSHP (\_SB_.PCI0.P2P_)
shpchp 0000:00:14.4: Requesting control of SHPC hotplug via OSHP (\_SB_.PCI0)
shpchp 0000:00:14.4: Cannot get control of SHPC hotplug
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP0] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: ACPI: processor limited to max C-state 1
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THZN] (53 C)
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf2307600
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.18.8-xanmod5 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xf2307500
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.18.8-xanmod5 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xf2307400
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.18.8-xanmod5 ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xf2306000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.18.8-xanmod5 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xf2305000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.18.8-xanmod5 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:16.0: irq 18, io mem 0xf2304000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.18.8-xanmod5 ohci_hcd
usb usb6: SerialNumber: 0000:00:16.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x010000b6
microcode: CPU1: patch_level=0x010000b6
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (2563151277, 0)->(2686207976, -123056699)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 9a4d1b0d9c32014a5b038b2d629a0e3f67f09fcc'
zswap: loaded using pool lz4/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
ima: Allocated hash algorithm: sha1
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
Magic number: 2:486:45
rtc_cmos 00:01: setting system clock to 2018-09-17 21:01:43 UTC (1537218103)
acpi_cpufreq: overriding BIOS provided _PSD data
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
usb 3-4: new high-speed USB device number 2 using ehci-pci
tsc: Refined TSC clocksource calibration: 2094.754 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e31d4d7de1, max_idle_ns: 440795244466 ns
clocksource: Switched to clocksource tsc
Freeing unused kernel image memory: 2356K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1784K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
scsi host0: ahci
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
atl1c 0000:08:00.0: version 1.0.1.1-NAPI
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m1024@0xf2307000 port 0xf2307100 irq 24
ata2: SATA max UDMA/133 abar m1024@0xf2307000 port 0xf2307180 irq 24
ata3: SATA max UDMA/133 abar m1024@0xf2307000 port 0xf2307200 irq 24
acpi device:02: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
atl1c 0000:08:00.0 enp8s0: renamed from eth0
[drm] radeon kernel modesetting enabled.
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x1179:0xFDE4 0x00).
resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
caller pci_map_rom+0x58/0xe0 mapping multiple BARs
ATOM BIOS: Tos_Berlin10AD
radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 1886424 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading RS780 Microcode
[drm] radeon: power management initialized
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x00000000C0146000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0x(____ptrval____)
radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038 and cpu addr 0x(____ptrval____)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 0 usecs
ata3: SATA link down (SStatus 0 SControl 300)
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: SanDisk SDSSDHP064G, X2316RL, max UDMA/133
ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata2.00: ATAPI: MATSHITADVD-RAM UJ890AS, 1.40, max UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDHP0 6RL PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/100
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890AS 1.40 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 3-4: New USB device found, idVendor=10f1, idProduct=1a2a, bcdDevice=18.15
usb 3-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-4: Product: USB Camera
usb 3-4: Manufacturer: Generic
usb 3-4: SerialNumber: MU418ASA
[drm] ib test on ring 5 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] LVDS-1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] LCD1: INTERNAL_KLDSCP_LVTMA
psmouse serio1: synaptics: queried max coordinates: x [..5692], y [..4680]
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
psmouse serio1: synaptics: Toshiba Satellite C650D detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[drm] fb mappable at 0xE0247000
[drm] vram apper at 0xE0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:01:05.0 on minor 0
raid6: sse2x1 gen() 2560 MB/s
raid6: sse2x1 xor() 2421 MB/s
raid6: sse2x2 gen() 3179 MB/s
raid6: sse2x2 xor() 2751 MB/s
raid6: sse2x4 gen() 3419 MB/s
raid6: sse2x4 xor() 1981 MB/s
raid6: using algorithm sse2x4 gen() 3419 MB/s
raid6: .... xor() 1981 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 6452.000 MB/sec
generic_sse: 6216.000 MB/sec
xor: using function: prefetch64-sse (6452.000 MB/sec)
Btrfs loaded, crc32c=crc32c-generic
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice System Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
systemd-journald[345]: Received request to flush runtime journal from PID 1
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.24
audit: type=1400 audit(1537218109.636:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=447 comm="apparmor_parser"
audit: type=1400 audit(1537218109.636:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=447 comm="apparmor_parser"
audit: type=1400 audit(1537218109.636:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=447 comm="apparmor_parser"
audit: type=1400 audit(1537218109.636:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=447 comm="apparmor_parser"
audit: type=1400 audit(1537218109.738:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=448 comm="apparmor_parser"
audit: type=1400 audit(1537218109.740:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=448 comm="apparmor_parser"
input: Toshiba input device as /devices/virtual/input/input7
cfg80211: Loading compiled-in X.509 certificates for regulatory database
media: Linux media interface: v0.10
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
videodev: Linux video capture interface: v2.00
toshiba_acpi: Supported laptop features: hotkeys touchpad cooling-method
audit: type=1400 audit(1537218110.074:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=463 comm="apparmor_parser"
audit: type=1400 audit(1537218110.078:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=463 comm="apparmor_parser"
audit: type=1400 audit(1537218110.080:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=463 comm="apparmor_parser"
snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC0D0: inputs:
snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
uvcvideo: Found UVC 1.00 device USB Camera (10f1:1a2a)
uvcvideo 3-4:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 3-4:1.0: Entity type for entity Camera 1 was not initialized!
uvcvideo 3-4:1.0: Entity type for entity Extension 4 was not initialized!
input: USB Camera: Toshiba Webcam as /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
audit: type=1400 audit(1537218110.370:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=470 comm="apparmor_parser"
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffbd65c0ec0000, irq=16
ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 44:d9:e7:03:47:67
wlp2s0: send auth to 44:d9:e7:03:47:67 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 44:d9:e7:03:47:67 (try 1/3)
wlp2s0: RX AssocResp from 44:d9:e7:03:47:67 (capab=0x431 status=0 aid=2)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
midori[3324]: segfault at b8 ip 00007f0753238160 sp 00007ffec3cc4508 error 4 in libwebkitgtk-1.0.so.0.22.17[7f0752d7b000+1e37000]
Code: 53 48 89 fb 48 8d 7f 28 e8 9d 09 03 00 48 89 df 41 89 c4 e8 82 ff ff ff 44 89 e0 5b 41 5c 5d c3 66 2e 0f 1f 84 00 00 00 00 00 b6 87 b8 00 00 00 a8 20 74 04 a8 10 74 09 f3 c3 0f 1f 80 00 00
wlp2s0: deauthenticating from 44:d9:e7:03:47:67 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
IRQ 16: no longer affine to CPU1
IRQ 18: no longer affine to CPU1
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
LVT offset 1 assigned for vector 0x400
LVT offset 1 assigned
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
process: Switch to broadcast mode on CPU1
cache: parent cpu1 should not be sleeping
microcode: CPU1: patch_level=0x010000b6
CPU1 is up
ACPI: Waking up from system sleep state S3
ath: phy0: ASPM enabled: 0x42
[drm] PCIE GART of 512M enabled (table at 0x00000000C0146000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0x0000000014fa5de3
radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038 and cpu addr 0x00000000129c515d
sd 0:0:0:0: [sda] Starting disk
[drm] ring test on 0 succeeded in 0 usecs
usb 3-4: reset high-speed USB device number 2 using ehci-pci
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/100
psmouse serio1: synaptics: queried max coordinates: x [..5692], y [..4680]
[drm] ib test on ring 5 succeeded
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
usb 2-2: new high-speed USB device number 2 using ehci-pci
IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 2-2: New USB device found, idVendor=0bda, idProduct=0138, bcdDevice=38.82
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: USB2.0-CRW
usb 2-2: Manufacturer: Generic
usb 2-2: SerialNumber: 20090516388200000
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ums-realtek 2-2:1.0: USB Mass Storage device detected
usb 2-2: USB disconnect, device number 2
scsi host3: usb-storage 2-2:1.0
usbcore: registered new interface driver ums-realtek
wlp2s0: authenticate with 44:d9:e7:03:47:67
wlp2s0: send auth to 44:d9:e7:03:47:67 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 44:d9:e7:03:47:67 (try 1/3)
wlp2s0: RX AssocResp from 44:d9:e7:03:47:67 (capab=0x431 status=0 aid=2)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
Chrome_~dThread[31488]: segfault at 0 ip 00007ffbb3f172dd sp 00007ffbb2349b00 error 6 in libxul.so[7ffbb320f000+61dc000]
Code: a7 05 48 8d 0d 30 2d 50 04 48 89 08 c7 04 25 00 00 00 00 00 00 00 00 0f 0b 48 8b 05 8d 09 a7 05 48 8d 0d 86 2f 50 04 48 89 08 04 25 00 00 00 00 00 00 00 00 0f 0b 66 0f 1f 44 00 00 55 53 48
Chrome_~dThread[31558]: segfault at 0 ip 00007f12a84172dd sp 00007f12a6849b00 error 6 in libxul.so[7f12a770f000+61dc000]
Code: a7 05 48 8d 0d 30 2d 50 04 48 89 08 c7 04 25 00 00 00 00 00 00 00 00 0f 0b 48 8b 05 8d 09 a7 05 48 8d 0d 86 2f 50 04 48 89 08 04 25 00 00 00 00 00 00 00 00 0f 0b 66 0f 1f 44 00 00 55 53 48