dmesg - f3
random: get_random_bytes called from start_kernel+0x42/0x4f3 with crng_init=0
Linux version 4.13.13-2-pve (root@nora) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP PVE 4.13.13-32 (Thu, 21 Dec 2017 09:02:14 +0100) ()
Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.13-2-pve root=/dev/mapper/pve-root ro quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000ccb61fff] usable
BIOS-e820: [mem 0x00000000ccb62000-0x00000000cd15dfff] reserved
BIOS-e820: [mem 0x00000000cd15e000-0x00000000cd16dfff] ACPI data
BIOS-e820: [mem 0x00000000cd16e000-0x00000000cd28dfff] ACPI NVS
BIOS-e820: [mem 0x00000000cd28e000-0x00000000cd837fff] reserved
BIOS-e820: [mem 0x00000000cd838000-0x00000000cd838fff] usable
BIOS-e820: [mem 0x00000000cd839000-0x00000000cd87bfff] ACPI NVS
BIOS-e820: [mem 0x00000000cd87c000-0x00000000cdc9afff] usable
BIOS-e820: [mem 0x00000000cdc9b000-0x00000000cdff3fff] reserved
BIOS-e820: [mem 0x00000000cdff4000-0x00000000cdffffff] usable
BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/P8H77-V LE, BIOS 0608 07/27/2012
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FE0000000 write-back
2 base 0E0000000 mask FE0000000 uncachable
3 base 0D0000000 mask FF0000000 uncachable
4 base 0CF000000 mask FFF000000 uncachable
5 base 41FE00000 mask FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 16110M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8b86000fd7f0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8b8600097000] 97000 size 24576
BRK [0x39cd29000, 0x39cd29fff] PGTABLE
BRK [0x39cd2a000, 0x39cd2afff] PGTABLE
BRK [0x39cd2b000, 0x39cd2bfff] PGTABLE
BRK [0x39cd2c000, 0x39cd2cfff] PGTABLE
BRK [0x39cd2d000, 0x39cd2dfff] PGTABLE
BRK [0x39cd2e000, 0x39cd2efff] PGTABLE
BRK [0x39cd2f000, 0x39cd2ffff] PGTABLE
BRK [0x39cd30000, 0x39cd30fff] PGTABLE
BRK [0x39cd31000, 0x39cd31fff] PGTABLE
BRK [0x39cd32000, 0x39cd32fff] PGTABLE
BRK [0x39cd33000, 0x39cd33fff] PGTABLE
BRK [0x39cd34000, 0x39cd34fff] PGTABLE
RAMDISK: [mem 0x33aeb000-0x35d6cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CD161078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000CD16BC88 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000CD161180 00AB08 (v02 ALASKA A M I 00000021 INTL 20051117)
ACPI: FACS 0x00000000CD28C080 000040
ACPI: APIC 0x00000000CD16BD98 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000CD16BE10 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000CD16BE58 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000CD16BE98 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000CD16BED0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000CD16C240 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000CD16CBF0 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: BGRT 0x00000000CD16D6E0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
NODE_DATA(0) allocated [mem 0x41fdc8000-0x41fdf2fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041fdfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x0000000040003fff]
node 0: [mem 0x0000000040005000-0x00000000ccb61fff]
node 0: [mem 0x00000000cd838000-0x00000000cd838fff]
node 0: [mem 0x00000000cd87c000-0x00000000cdc9afff]
node 0: [mem 0x00000000cdff4000-0x00000000cdffffff]
node 0: [mem 0x0000000100000000-0x000000041fdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
On node 0 totalpages: 4115241
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13047 pages used for memmap
DMA32 zone: 834957 pages, LIFO batch:31
Normal zone: 51192 pages used for memmap
Normal zone: 3276288 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000cf200000-0x00000000df1fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0xccb62000-0xcd15dfff]
PM: Registered nosave memory: [mem 0xcd15e000-0xcd16dfff]
PM: Registered nosave memory: [mem 0xcd16e000-0xcd28dfff]
PM: Registered nosave memory: [mem 0xcd28e000-0xcd837fff]
PM: Registered nosave memory: [mem 0xcd839000-0xcd87bfff]
PM: Registered nosave memory: [mem 0xcdc9b000-0xcdff3fff]
PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff8b8a1fa00000 s119768 r8192 d31784 u524288
pcpu-alloc: s119768 r8192 d31784 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4050917
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.13-2-pve root=/dev/mapper/pve-root ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16078916K/16460964K available (9446K kernel code, 2485K rwdata, 4024K rodata, 2336K init, 2388K bss, 382048K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 38328 entries in 150 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3200.022 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.04 BogoMIPS (lpj=12800088)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-3210 CPU @ 3.20GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (25600.17 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcd16e000-0xcd28dfff] (1179648 bytes)
PM: Registering ACPI NVS region [mem 0xcd839000-0xcd87bfff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 4:51:37, date: 05/28/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8B8A0D626000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8B8A0D568800 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8B8A0D60BC00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 10 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7c1a000-0xf7c1a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7c18000-0xf7c183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7c17000-0xf7c173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7c16000-0xf7c167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7c15000-0xf7c150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xccb62000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcd839000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcdc9b000-0xcfffffff]
e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x1000-0x100f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] has been reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a1f] has been reserved
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xdf200000-0xdf200fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x20000000-0x201fffff] has been reserved
system 00:08: [mem 0x40004000-0x40004fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.5: PCI bridge to [bus 04-05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff window]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:05: resource 13 [mem 0xdf200000-0xfeafffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 35336K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc8b62000-0xccb62000] (64MB) mapped at [ffff8b86c8b62000-ffff8b86ccb61fff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1527483097.566:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7c18000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.13-2-pve ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c17000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.13-2-pve ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.13.13-2-pve xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.13.13-2-pve xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Bridge firewalling registered
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x306a9, pf=0x2, revision=0x12
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (637879472, 0)->(636029650, 1849822)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 2:858:869
rtc_cmos 00:02: setting system clock to 2018-05-28 04:51:38 UTC (1527483098)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2336K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 780K
Freeing unused kernel memory: 72K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xffffb140818c1000, 50:46:5d:09:2d:cb, XID 08000800 IRQ 25
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x18 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
r8169 0000:03:00.0 enp3s0: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16280 irq 26
ata5: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16300 irq 26
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT3._GTF, AE_NOT_FOUND (20170531/psparse-550)
ata5.00: ATA-8: WDC WD5003ABYZ-011FA0, 01.01S03, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133
ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT3._GTF, AE_NOT_FOUND (20170531/psparse-550)
ata5.00: configured for UDMA/133
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD7501AALS-0 0K05 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access ATA WDC WD5003ABYZ-0 1S03 PQ: 0 ANSI: 5
sda: sda1
sd 3:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
sdb: sdb1 sdb2 sdb3
sd 4:0:0:0: [sdb] Attached SCSI disk
usb 2-1.5: new low-speed USB device number 3 using ehci-pci
usb 2-1.5: New USB device found, idVendor=046d, idProduct=c05a
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: USB Optical Mouse
usb 2-1.5: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver usbmouse
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.0001/input/input2
hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.6: new low-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 3199.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e2048a8b6b, max_idle_ns: 440795205530 ns
usb 2-1.6: New USB device found, idVendor=046d, idProduct=c31c
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: USB Keyboard
usb 2-1.6: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:046D:C31C.0002/input/input3
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.6/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:046D:C31C.0003/input/input4
hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.6/input1
usbcore: registered new interface driver usbkbd
usb 2-1.8: new low-speed USB device number 5 using ehci-pci
usb 2-1.8: New USB device found, idVendor=0529, idProduct=0001
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8: Product: HASP HL 3.25
usb 2-1.8: Manufacturer: AKS
raid6: sse2x1 gen() 8548 MB/s
raid6: sse2x1 xor() 6532 MB/s
raid6: sse2x2 gen() 7959 MB/s
raid6: sse2x2 xor() 5411 MB/s
raid6: sse2x4 gen() 8550 MB/s
raid6: sse2x4 xor() 5941 MB/s
raid6: using algorithm sse2x4 gen() 8550 MB/s
raid6: .... xor() 5941 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
clocksource: Switched to clocksource tsc
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: crng init done
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
Loading iSCSI transport class v2.0-870.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd-journald[318]: Received request to flush runtime journal from PID 1
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input5
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
Error: Driver 'pcspkr' is already registered, aborting...
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
asus_wmi: Number of fans: 1
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
fbcon: inteldrmfb (fb0) is primary device
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
Console: switching to colour frame buffer device 160x64
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
Adding 8388604k swap on /dev/mapper/pve-swap. Priority:-1 extents:1 across:8388604k FS
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
device-mapper: thin: Data device (dm-5) discard unsupported: Disabling discard passdown.
Netfilter messages via NETLINK v0.30.
audit: type=1400 audit(1527483109.665:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=855 comm="apparmor_parser"
audit: type=1400 audit(1527483109.669:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=854 comm="apparmor_parser"
audit: type=1400 audit(1527483109.669:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=854 comm="apparmor_parser"
audit: type=1400 audit(1527483109.669:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=854 comm="apparmor_parser"
audit: type=1400 audit(1527483109.669:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=854 comm="apparmor_parser"
softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
new mount options do not match the existing superblock, will be ignored
vmbr0: port 1(enp3s0) entered blocking state
vmbr0: port 1(enp3s0) entered disabled state
device enp3s0 entered promiscuous mode
r8169 0000:03:00.0 enp3s0: link down
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): vmbr0: link is not ready
audit: type=1400 audit(1527483111.927:7): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/bin/lxc-start" pid=1184 comm="apparmor_parser"
audit: type=1400 audit(1527483111.933:8): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default" pid=1188 comm="apparmor_parser"
audit: type=1400 audit(1527483111.933:9): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-cgns" pid=1188 comm="apparmor_parser"
audit: type=1400 audit(1527483111.933:10): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-mounting" pid=1188 comm="apparmor_parser"
audit: type=1400 audit(1527483111.933:11): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-nesting" pid=1188 comm="apparmor_parser"
r8169 0000:03:00.0 enp3s0: link up
vmbr0: port 1(enp3s0) entered blocking state
vmbr0: port 1(enp3s0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vmbr0: link becomes ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_set: protocol 6
EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): veth100i0: link is not ready
vmbr0: port 2(veth100i0) entered blocking state
vmbr0: port 2(veth100i0) entered disabled state
device veth100i0 entered promiscuous mode
eth0: renamed from vethX0IAXV
vmbr0: port 2(veth100i0) entered blocking state
vmbr0: port 2(veth100i0) entered forwarding state
EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): veth101i0: link is not ready
vmbr0: port 3(veth101i0) entered blocking state
vmbr0: port 3(veth101i0) entered disabled state
device veth101i0 entered promiscuous mode
eth0: renamed from veth96RCUN
vmbr0: port 3(veth101i0) entered blocking state
vmbr0: port 3(veth101i0) entered forwarding state
device tap102i0 entered promiscuous mode
vmbr0: port 4(tap102i0) entered blocking state
vmbr0: port 4(tap102i0) entered disabled state
vmbr0: port 4(tap102i0) entered blocking state
vmbr0: port 4(tap102i0) entered forwarding state
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3130 > 3128), lowering kernel.perf_event_max_sample_rate to 63750
apache2 invoked oom-killer: gfp_mask=0x14000c0(GFP_KERNEL), nodemask=(null), order=0, oom_score_adj=0
apache2 cpuset=ns mems_allowed=0
CPU: 1 PID: 16707 Comm: apache2 Not tainted 4.13.13-2-pve #1
Hardware name: System manufacturer System Product Name/P8H77-V LE, BIOS 0608 07/27/2012
Call Trace:
dump_stack+0x63/0x8b
dump_header+0x97/0x225
? mem_cgroup_scan_tasks+0xc4/0xf0
oom_kill_process+0x208/0x410
out_of_memory+0x11d/0x4c0
mem_cgroup_out_of_memory+0x4b/0x80
mem_cgroup_oom_synchronize+0x31e/0x340
? get_mem_cgroup_from_mm+0x90/0x90
pagefault_out_of_memory+0x36/0x7b
mm_fault_error+0x8f/0x190
__do_page_fault+0x4be/0x4f0
do_page_fault+0x22/0x30
page_fault+0x28/0x30
RIP: 0033:0x7f82c16c3208
RSP: 002b:00007f82a8150cc8 EFLAGS: 00010246
RAX: ffffffffffffff92 RBX: 00007f82a8150d90 RCX: 00007f82c16c2a55
RDX: 0000000000000000 RSI: 0000000000000189 RDI: 0000000000000000
RBP: 00007f82a411ecf0 R08: 0000000000000000 R09: 00000000ffffffff
R10: 00007f82a8150d90 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00000000c0000001 R15: 00007f82a414cca8
Task in /lxc/101/ns/user.slice/user-0.slice/session-8.scope killed as a result of limit of /lxc/101
memory: usage 524288kB, limit 524288kB, failcnt 158252
memory+swap: usage 606092kB, limit 1048576kB, failcnt 0
kmem: usage 23036kB, limit 9007199254740988kB, failcnt 0
Memory cgroup stats for /lxc/101: cache:0KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB swap:0KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns: cache:96KB rss:4KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:96KB writeback:0KB swap:19356KB inactive_anon:4KB active_anon:0KB inactive_file:40KB active_file:56KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns/user.slice: cache:0KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB swap:0KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns/user.slice/user-0.slice: cache:0KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB swap:0KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns/user.slice/user-0.slice/user@0.service: cache:0KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB swap:824KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns/user.slice/user-0.slice/session-8.scope: cache:500516KB rss:152KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:500440KB writeback:96KB swap:32672KB inactive_anon:0KB active_anon:0KB inactive_file:249960KB active_file:250172KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns/user.slice/user-0.slice/session-27.scope: cache:0KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB swap:928KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns/init.scope: cache:0KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB swap:1028KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns/system.slice: cache:484KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:76KB dirty:16KB writeback:0KB swap:26996KB inactive_anon:0KB active_anon:0KB inactive_file:368KB active_file:116KB unevictable:0KB
[ pid ] uid tgid total_vm rss nr_ptes nr_pmds swapents oom_score_adj name
[13352] 0 13352 9336 1 22 3 349 0 systemd
[13444] 0 13444 8819 1 19 3 75 0 systemd-journal
[13562] 0 13562 6517 0 18 3 72 0 cron
[13563] 109 13563 10726 0 26 3 113 -900 dbus-daemon
[13609] 0 13609 7137 1 18 3 77 0 systemd-logind
[13611] 104 13611 64099 1 28 3 147 0 rsyslogd
[13614] 0 13614 68209 0 37 3 170 0 accounts-daemon
[13660] 0 13660 4030 0 11 3 214 0 dhclient
[13699] 0 13699 16403 0 34 4 182 -1000 sshd
[13716] 0 13716 3211 0 12 4 36 0 agetty
[13717] 0 13717 3211 0 12 3 37 0 agetty
[13718] 0 13718 3211 0 12 3 38 0 agetty
[13922] 0 13922 16352 0 21 3 128 0 master
[13924] 106 13924 16881 1 24 3 114 0 qmgr
[13998] 999 13998 173376 0 50 3 905 -100 ras
[16220] 0 16220 23865 1 50 3 250 0 sshd
[16222] 0 16222 9134 0 22 3 149 0 systemd
[16240] 0 16240 15157 0 32 3 341 0 (sd-pam)
[16305] 0 16305 4790 1 14 3 350 0 bash
[ 5567] 0 5567 12418 1 30 3 430 0 mc
[ 5569] 0 5569 4574 1 15 3 134 0 bash
[ 7206] 106 7206 16869 0 23 3 111 0 pickup
[14520] 0 14520 23957 1 50 3 355 0 sshd
[14577] 0 14577 2397 1 10 3 53 0 bash
[14579] 0 14579 1127 1 8 3 39 0 sh
[16413] 0 16413 30139 0 49 4 545 0 apache2
[16416] 33 16416 569057 0 162 6 3338 0 apache2
[16417] 33 16417 569089 0 161 6 3468 0 apache2
[18816] 0 18816 12448 1 29 3 113 0 sudo
[18817] 0 18817 21596 0 47 3 3771 0 apt-get
[19335] 0 19335 4253 1 14 3 449 0 dpkg
[19339] 0 19339 14586 1 32 3 2783 0 frontend
[19362] 0 19362 1127 1 8 3 45 0 oracle-java8-in
[19582] 0 19582 4426 28 14 3 68 0 cp
Memory cgroup out of memory: Kill process 18817 (apt-get) score 14 or sacrifice child
Killed process 19335 (dpkg) total-vm:17012kB, anon-rss:0kB, file-rss:4kB, shmem-rss:0kB
oom_reaper: reaped process 19335 (dpkg), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
cp invoked oom-killer: gfp_mask=0x14000c0(GFP_KERNEL), nodemask=(null), order=0, oom_score_adj=0
cp cpuset=ns mems_allowed=0
CPU: 1 PID: 19582 Comm: cp Not tainted 4.13.13-2-pve #1
Hardware name: System manufacturer System Product Name/P8H77-V LE, BIOS 0608 07/27/2012
Call Trace:
dump_stack+0x63/0x8b
dump_header+0x97/0x225
? mem_cgroup_scan_tasks+0xc4/0xf0
oom_kill_process+0x208/0x410
out_of_memory+0x11d/0x4c0
mem_cgroup_out_of_memory+0x4b/0x80
mem_cgroup_oom_synchronize+0x31e/0x340
? get_mem_cgroup_from_mm+0x90/0x90
pagefault_out_of_memory+0x36/0x7b
mm_fault_error+0x8f/0x190
__do_page_fault+0x4be/0x4f0
do_page_fault+0x22/0x30
page_fault+0x28/0x30
RIP: 0033:0x410317
RSP: 002b:00007ffc4768b268 EFLAGS: 00010202
RAX: 0000000000020000 RBX: 0000000000020000 RCX: 00007f0b43e21a10
RDX: 0000000000020000 RSI: 0000000001b07000 RDI: 0000000000000005
RBP: 0000000000020000 R08: 0000000001b07000 R09: 0000000000000000
R10: 0000000000001000 R11: 0000000000000246 R12: 0000000001b07000
R13: 0000000000000005 R14: 0000000001b07000 R15: 0000000000000000
Task in /lxc/101/ns/user.slice/user-0.slice/session-8.scope killed as a result of limit of /lxc/101
memory: usage 524288kB, limit 524288kB, failcnt 158727
memory+swap: usage 604716kB, limit 1048576kB, failcnt 0
kmem: usage 22928kB, limit 9007199254740988kB, failcnt 0
Memory cgroup stats for /lxc/101: cache:0KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB swap:0KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns: cache:96KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:96KB writeback:0KB swap:19360KB inactive_anon:0KB active_anon:0KB inactive_file:48KB active_file:48KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns/user.slice: cache:0KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB swap:0KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns/user.slice/user-0.slice: cache:0KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB swap:0KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns/user.slice/user-0.slice/user@0.service: cache:0KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB swap:824KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns/user.slice/user-0.slice/session-8.scope: cache:500484KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:500464KB writeback:0KB swap:31288KB inactive_anon:0KB active_anon:0KB inactive_file:249728KB active_file:249604KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns/user.slice/user-0.slice/session-27.scope: cache:0KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB swap:928KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns/init.scope: cache:0KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB swap:1028KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
Memory cgroup stats for /lxc/101/ns/system.slice: cache:780KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:132KB dirty:16KB writeback:0KB swap:27000KB inactive_anon:0KB active_anon:0KB inactive_file:608KB active_file:172KB unevictable:0KB
[ pid ] uid tgid total_vm rss nr_ptes nr_pmds swapents oom_score_adj name
[13352] 0 13352 9336 1 22 3 349 0 systemd
[13444] 0 13444 8819 1 19 3 75 0 systemd-journal
[13562] 0 13562 6517 0 18 3 74 0 cron
[13563] 109 13563 10726 0 26 3 113 -900 dbus-daemon
[13609] 0 13609 7137 1 18 3 77 0 systemd-logind
[13611] 104 13611 64099 1 28 3 147 0 rsyslogd
[13614] 0 13614 68209 0 37 3 170 0 accounts-daemon
[13660] 0 13660 4030 0 11 3 214 0 dhclient
[13699] 0 13699 16403 0 34 4 182 -1000 sshd
[13716] 0 13716 3211 0 12 4 36 0 agetty
[13717] 0 13717 3211 0 12 3 37 0 agetty
[13718] 0 13718 3211 0 12 3 38 0 agetty
[13922] 0 13922 16352 0 21 3 128 0 master
[13924] 106 13924 16881 1 24 3 114 0 qmgr
[13998] 999 13998 173376 0 50 3 905 -100 ras
[16220] 0 16220 23865 1 50 3 250 0 sshd
[16222] 0 16222 9134 0 22 3 149 0 systemd
[16240] 0 16240 15157 0 32 3 341 0 (sd-pam)
[16305] 0 16305 4790 1 14 3 350 0 bash
[ 5567] 0 5567 12418 1 30 3 430 0 mc
[ 5569] 0 5569 4574 1 15 3 134 0 bash
[ 7206] 106 7206 16869 0 23 3 111 0 pickup
[14520] 0 14520 23957 1 50 3 355 0 sshd
[14577] 0 14577 2397 1 10 3 53 0 bash
[14579] 0 14579 1127 1 8 3 39 0 sh
[16413] 0 16413 30139 0 49 4 545 0 apache2
[16416] 33 16416 569057 0 162 6 3342 0 apache2
[16417] 33 16417 569089 0 161 6 3469 0 apache2
[18816] 0 18816 12448 1 29 3 113 0 sudo
[18817] 0 18817 21596 0 47 3 3776 0 apt-get
[19339] 0 19339 14586 1 32 3 2783 0 frontend
[19362] 0 19362 1127 1 8 3 45 0 oracle-java8-in
[19582] 0 19582 4426 0 14 3 103 0 cp
Memory cgroup out of memory: Kill process 18817 (apt-get) score 14 or sacrifice child
Killed process 18817 (apt-get) total-vm:86384kB, anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
oom_reaper: reaped process 18817 (apt-get), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
vmbr0: port 3(veth101i0) entered disabled state
vmbr0: port 3(veth101i0) entered disabled state
device veth101i0 left promiscuous mode
vmbr0: port 3(veth101i0) entered disabled state
EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): veth101i0: link is not ready
vmbr0: port 3(veth101i0) entered blocking state
vmbr0: port 3(veth101i0) entered disabled state
device veth101i0 entered promiscuous mode
eth0: renamed from veth367A1T
vmbr0: port 3(veth101i0) entered blocking state
vmbr0: port 3(veth101i0) entered forwarding state
EXT4-fs (dm-13): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-13): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): veth105i0: link is not ready
vmbr0: port 5(veth105i0) entered blocking state
vmbr0: port 5(veth105i0) entered disabled state
device veth105i0 entered promiscuous mode
eth0: renamed from vethC0XMDH
audit: type=1400 audit(1527504798.690:12): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/pstore/" pid=18639 comm="mount" fstype="pstore" srcname="pstore"
audit: type=1400 audit(1527504798.690:13): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/pstore/" pid=18639 comm="mount" fstype="pstore" srcname="pstore" flags="ro"
audit: type=1400 audit(1527504798.695:14): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/kernel/config/" pid=18646 comm="mount" fstype="configfs" srcname="configfs"
audit: type=1400 audit(1527504798.695:15): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/kernel/config/" pid=18646 comm="mount" fstype="configfs" srcname="configfs" flags="ro"
audit: type=1400 audit(1527504799.106:16): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=18850 comm="mount" flags="rw, remount, silent"
audit: type=1400 audit(1527504799.107:17): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=18851 comm="mount" flags="rw, remount, relatime"
audit: type=1400 audit(1527504799.148:18): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/run/" pid=18927 comm="mount" flags="rw, nosuid, noexec, remount, relatime"
audit: type=1400 audit(1527504799.152:19): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/run/lock/" pid=18938 comm="mount" flags="rw, nosuid, nodev, noexec, remount, relatime"
audit: type=1400 audit(1527504799.193:20): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/run/shm/" pid=19025 comm="mount" flags="rw, nosuid, nodev, noexec, remount, relatime"
audit: type=1400 audit(1527504799.197:21): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/dev/pts/" pid=19033 comm="mount" flags="rw, nosuid, noexec, remount, relatime"
vmbr0: port 5(veth105i0) entered blocking state
vmbr0: port 5(veth105i0) entered forwarding state
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
perf: interrupt took too long (3913 > 3912), lowering kernel.perf_event_max_sample_rate to 51000
vmbr0: port 5(veth105i0) entered disabled state
device veth105i0 left promiscuous mode
vmbr0: port 5(veth105i0) entered disabled state
EXT4-fs (dm-13): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-13): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): veth105i0: link is not ready
vmbr0: port 5(veth105i0) entered blocking state
vmbr0: port 5(veth105i0) entered disabled state
device veth105i0 entered promiscuous mode
eth0: renamed from vethM6J5S9
kauditd_printk_skb: 1 callbacks suppressed
audit: type=1400 audit(1527507419.985:23): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/pstore/" pid=24629 comm="mount" fstype="pstore" srcname="pstore"
audit: type=1400 audit(1527507419.985:24): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/pstore/" pid=24629 comm="mount" fstype="pstore" srcname="pstore" flags="ro"
audit: type=1400 audit(1527507419.989:25): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/kernel/config/" pid=24636 comm="mount" fstype="configfs" srcname="configfs"
audit: type=1400 audit(1527507419.989:26): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/kernel/config/" pid=24636 comm="mount" fstype="configfs" srcname="configfs" flags="ro"
audit: type=1400 audit(1527507420.225:27): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=24838 comm="mount" flags="rw, remount, silent"
audit: type=1400 audit(1527507420.226:28): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=24839 comm="mount" flags="rw, remount, relatime"
audit: type=1400 audit(1527507420.264:29): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/run/" pid=24915 comm="mount" flags="rw, nosuid, noexec, remount, relatime"
audit: type=1400 audit(1527507420.268:30): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/run/lock/" pid=24926 comm="mount" flags="rw, nosuid, nodev, noexec, remount, relatime"
audit: type=1400 audit(1527507420.302:31): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/run/shm/" pid=25013 comm="mount" flags="rw, nosuid, nodev, noexec, remount, relatime"
audit: type=1400 audit(1527507420.305:32): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/dev/pts/" pid=25021 comm="mount" flags="rw, nosuid, noexec, remount, relatime"
vmbr0: port 5(veth105i0) entered blocking state
vmbr0: port 5(veth105i0) entered forwarding state
audit: type=1400 audit(1527507425.003:33): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=25621 comm="cgmanager" flags="rw, rprivate"
vmbr0: port 5(veth105i0) entered disabled state
device veth105i0 left promiscuous mode
vmbr0: port 5(veth105i0) entered disabled state
device tap103i0 entered promiscuous mode
vmbr0: port 5(tap103i0) entered blocking state
vmbr0: port 5(tap103i0) entered disabled state
vmbr0: port 5(tap103i0) entered blocking state
vmbr0: port 5(tap103i0) entered forwarding state
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
device tap104i0 entered promiscuous mode
vmbr0: port 6(tap104i0) entered blocking state
vmbr0: port 6(tap104i0) entered disabled state
vmbr0: port 6(tap104i0) entered blocking state
vmbr0: port 6(tap104i0) entered forwarding state
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.0004/input/input14
hid-generic 0003:046D:C05A.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.0005/input/input15
hid-generic 0003:046D:C05A.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.0006/input/input16
hid-generic 0003:046D:C05A.0006: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.0007/input/input17
hid-generic 0003:046D:C05A.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.0008/input/input18
hid-generic 0003:046D:C05A.0008: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: usbfs: interface 0 claimed by usbfs while 'kvm' sets config #1
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.0009/input/input19
hid-generic 0003:046D:C05A.0009: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
vmbr0: port 6(tap104i0) entered disabled state
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
device tap105i0 entered promiscuous mode
vmbr0: port 6(tap105i0) entered blocking state
vmbr0: port 6(tap105i0) entered disabled state
vmbr0: port 6(tap105i0) entered blocking state
vmbr0: port 6(tap105i0) entered forwarding state
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
vmbr0: port 5(tap103i0) entered disabled state
vmbr0: port 6(tap105i0) entered disabled state
device tap105i0 entered promiscuous mode
vmbr0: port 5(tap105i0) entered blocking state
vmbr0: port 5(tap105i0) entered disabled state
vmbr0: port 5(tap105i0) entered blocking state
vmbr0: port 5(tap105i0) entered forwarding state
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
vmbr0: port 5(tap105i0) entered disabled state
device tap105i0 entered promiscuous mode
vmbr0: port 5(tap105i0) entered blocking state
vmbr0: port 5(tap105i0) entered disabled state
vmbr0: port 5(tap105i0) entered blocking state
vmbr0: port 5(tap105i0) entered forwarding state
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
device tap103i0 entered promiscuous mode
vmbr0: port 6(tap103i0) entered blocking state
vmbr0: port 6(tap103i0) entered disabled state
vmbr0: port 6(tap103i0) entered blocking state
vmbr0: port 6(tap103i0) entered forwarding state
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: device descriptor read/64, error 18
usb 2-1.8: device descriptor read/64, error 18
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: device descriptor read/64, error -32
usb 2-1.5: device descriptor read/64, error -32
usb 2-1.6: reset low-speed USB device number 4 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: reset low-speed USB device number 4 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.8: reset low-speed USB device number 5 using ehci-pci
usb 2-1.8: device firmware changed
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.8: USB disconnect, device number 5
usb 2-1.6: reset low-speed USB device number 4 using ehci-pci
usb 2-1.8: new low-speed USB device number 6 using ehci-pci
usb 2-1.8: New USB device found, idVendor=0529, idProduct=0001
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8: Product: HASP HL 3.25
usb 2-1.8: Manufacturer: AKS
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
device tap104i0 entered promiscuous mode
vmbr0: port 7(tap104i0) entered blocking state
vmbr0: port 7(tap104i0) entered disabled state
vmbr0: port 7(tap104i0) entered blocking state
vmbr0: port 7(tap104i0) entered forwarding state
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.000A/input/input20
hid-generic 0003:046D:C05A.000A: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.000B/input/input21
hid-generic 0003:046D:C05A.000B: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.000C/input/input22
hid-generic 0003:046D:C05A.000C: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.000D/input/input23
hid-generic 0003:046D:C05A.000D: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.000E/input/input24
hid-generic 0003:046D:C05A.000E: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.000F/input/input25
hid-generic 0003:046D:C05A.000F: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.5: usbfs: process 14121 (kvm) did not claim interface 0 before use
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: usbfs: interface 0 claimed by usbfs while 'kvm' sets config #1
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.0010/input/input26
hid-generic 0003:046D:C05A.0010: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
vmbr0: port 7(tap104i0) entered disabled state
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
device tap104i0 entered promiscuous mode
vmbr0: port 7(tap104i0) entered blocking state
vmbr0: port 7(tap104i0) entered disabled state
vmbr0: port 7(tap104i0) entered blocking state
vmbr0: port 7(tap104i0) entered forwarding state
device tap106i0 entered promiscuous mode
vmbr0: port 8(tap106i0) entered blocking state
vmbr0: port 8(tap106i0) entered disabled state
vmbr0: port 8(tap106i0) entered blocking state
vmbr0: port 8(tap106i0) entered forwarding state
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
hrtimer: interrupt took 4955 ns
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
usb 2-1.8: reset low-speed USB device number 6 using ehci-pci
vmbr0: port 6(tap103i0) entered disabled state
vmbr0: port 7(tap104i0) entered disabled state
vmbr0: port 5(tap105i0) entered disabled state
vmbr0: port 8(tap106i0) entered disabled state
EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): veth107i0: link is not ready
vmbr0: port 5(veth107i0) entered blocking state
vmbr0: port 5(veth107i0) entered disabled state
device veth107i0 entered promiscuous mode
eth0: renamed from veth4BCXUO
audit: type=1400 audit(1527763504.565:34): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=2028 comm="mount" flags="rw, remount"
vmbr0: port 5(veth107i0) entered blocking state
vmbr0: port 5(veth107i0) entered forwarding state
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
usb 2-1.5: reset low-speed USB device number 3 using ehci-pci
vmbr0: port 4(tap102i0) entered disabled state
usb 2-1.5: USB disconnect, device number 3
usb 2-1.5: new low-speed USB device number 7 using ehci-pci
usb 2-1.5: New USB device found, idVendor=046d, idProduct=c05a
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: USB Optical Mouse
usb 2-1.5: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05A.0011/input/input27
hid-generic 0003:046D:C05A.0011: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
vmbr0: port 3(veth101i0) entered disabled state
device veth101i0 left promiscuous mode
vmbr0: port 3(veth101i0) entered disabled state
vmbr0: port 2(veth100i0) entered disabled state
device veth100i0 left promiscuous mode
vmbr0: port 2(veth100i0) entered disabled state
device tap108i0 entered promiscuous mode
vmbr0: port 2(tap108i0) entered blocking state
vmbr0: port 2(tap108i0) entered disabled state
vmbr0: port 2(tap108i0) entered blocking state
vmbr0: port 2(tap108i0) entered forwarding state
vmbr0: port 5(veth107i0) entered disabled state
device veth107i0 left promiscuous mode
vmbr0: port 5(veth107i0) entered disabled state
vmbr0: port 2(tap108i0) entered disabled state
device tap108i0 entered promiscuous mode
vmbr0: port 2(tap108i0) entered blocking state
vmbr0: port 2(tap108i0) entered disabled state
vmbr0: port 2(tap108i0) entered blocking state
vmbr0: port 2(tap108i0) entered forwarding state
vmbr0: port 2(tap108i0) entered disabled state
EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): veth107i0: link is not ready
vmbr0: port 2(veth107i0) entered blocking state
vmbr0: port 2(veth107i0) entered disabled state
device veth107i0 entered promiscuous mode
eth0: renamed from vethQ9K8KG
audit: type=1400 audit(1527827189.452:35): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=28849 comm="mount" flags="rw, remount"
vmbr0: port 2(veth107i0) entered blocking state
vmbr0: port 2(veth107i0) entered forwarding state