dmesg - Low_Server
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-693.21.1.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Wed Mar 7 19:03:37 UTC 2018
Command line: BOOT_IMAGE=/vmlinuz-3.10.0-693.21.1.el7.x86_64 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=en_US.UTF-8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000987ff] usable
BIOS-e820: [mem 0x0000000000098800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000c2000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bff1ffff] usable
BIOS-e820: [mem 0x00000000bff20000-0x00000000bff25fff] ACPI data
BIOS-e820: [mem 0x00000000bff26000-0x00000000bff7ffff] ACPI NVS
BIOS-e820: [mem 0x00000000bff80000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec003ff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.34 present.
DMI: empty empty/S2892, BIOS 2003Q2 12/04/2006
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0100000000 mask FFC0000000 write-back
2 base 0080000000 mask FFC0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbff20 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f6f60-0x000f6f6f] mapped at [ffff8800000f6f60]
Base memory trampoline at [ffff880000092000] 92000 size 24576
BRK [0x02001000, 0x02001fff] PGTABLE
BRK [0x02002000, 0x02002fff] PGTABLE
BRK [0x02003000, 0x02003fff] PGTABLE
BRK [0x02004000, 0x02004fff] PGTABLE
RAMDISK: [mem 0x3598a000-0x36cbcfff]
Early table checksum verification disabled
ACPI: RSDP 00000000000f6f30 00014 (v00 PTLTD )
ACPI: RSDT 00000000bff21eb9 00038 (v01 PTLTD RSDT 06040000 LTP 00000000)
ACPI: FACP 00000000bff25dae 00074 (v01 NVIDIA CK8S 06040000 PTL_ 000F4240)
ACPI: DSDT 00000000bff21ef1 03EBD (v01 NVIDIA CK8 06040000 MSFT 0100000E)
ACPI: FACS 00000000bff26fc0 00040
ACPI: SRAT 00000000bff25e22 000F0 (v01 AMD HAMMER 06040000 AMD 00000001)
ACPI: SPCR 00000000bff25f12 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
ACPI: APIC 00000000bff25f62 00076 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 00000000bff25fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 1 -> APIC 0x01 -> Node 1
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0x7fffffff]
SRAT: Node 1 PXM 1 [mem 0x80000000-0xbfffffff]
SRAT: Node 1 PXM 1 [mem 0x100000000-0x13fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x7fffffff] -> [mem 0x00000000-0x7fffffff]
NUMA: Node 1 [mem 0x80000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x80000000-0x13fffffff]
NODE_DATA(0) allocated [mem 0x7ffd9000-0x7fffffff]
NODE_DATA(1) allocated [mem 0x13ffd6000-0x13fffcfff]
Reserving 161MB of memory at 688MB for crashkernel (System RAM: 4094MB)
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00097fff]
node 0: [mem 0x00100000-0x7fffffff]
node 1: [mem 0x80000000-0xbff1ffff]
node 1: [mem 0x100000000-0x13fffffff]
Initmem setup node 0 [mem 0x00001000-0x7fffffff]
On node 0 totalpages: 524183
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3991 pages, LIFO batch:0
DMA32 zone: 8128 pages used for memmap
DMA32 zone: 520192 pages, LIFO batch:31
Initmem setup node 1 [mem 0x80000000-0x13fffffff]
On node 1 totalpages: 524064
DMA32 zone: 4093 pages used for memmap
DMA32 zone: 261920 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xdf300000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 17, address 0xdf300000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xdf301000] gsi_base[28])
IOAPIC[2]: apic_id 4, version 17, address 0xdf301000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00098000-0x00098fff]
PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000c1fff]
PM: Registered nosave memory: [mem 0x000c2000-0x000fffff]
PM: Registered nosave memory: [mem 0xbff20000-0xbff25fff]
PM: Registered nosave memory: [mem 0xbff26000-0xbff7ffff]
PM: Registered nosave memory: [mem 0xbff80000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfff7ffff]
PM: Registered nosave memory: [mem 0xfff80000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
Detected single cpu native boot.
Important: In CentOS 7, single threaded, single CPU 64-bit physical systems are unsupported. Please see for more information
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:2
PERCPU: Embedded 35 pages/cpu @ffff88007dc00000 s104600 r8192 d30568 u2097152
pcpu-alloc: s104600 r8192 d30568 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0 [1] 1
Built 2 zonelists in Node order, mobility grouping on. Total pages: 1031845
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-693.21.1.el7.x86_64 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=en_US.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
Memory: 3793860k/5242880k available (6940k kernel code, 1049892k absent, 399128k reserved, 4560k data, 1792k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=2
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=2.
NR_IRQS:327936 nr_irqs:512 0
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
tsc: Fast TSC calibration using PIT
tsc: Detected 2210.053 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.10 BogoMIPS (lpj=2210053)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys net_prio
tseg: 00bff80000
mce: CPU supports 5 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 6
FEATURE SPEC_CTRL Not Present
FEATURE IBPB_SUPPORT Not Present
Spectre V2 : Vulnerable: Retpoline without IBPB
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 26646 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
smpboot: CPU0: AMD Opteron(tm) Processor 248 (fam: 0f, model: 25, stepping: 01)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 1, Processors #1 OK
Brought up 2 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 2 processors activated (8839.54 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbff26000-0xbff7ffff] (368640 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 7:54:22, date: 05/04/18
NET: Registered protocol family 16
node 0 link 0: io port [1000, 2fff]
node 0 link 2: io port [3000, 4fff]
TOM: 00000000c0000000 aka 3072M
node 0 link 0: mmio [dd000000, df2fffff]
node 0 link 2: mmio [df300000, dfffffff]
node 0 link 0: mmio [a0000, bffff]
TOM2: 0000000140000000 aka 5120M
bus: [bus 00-17] on node 0 link 0
bus: 00 [io 0x0000-0x2fff]
bus: 00 [io 0x5000-0xffff]
bus: 00 [mem 0xc0000000-0xdf2fffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xe0000000-0xffffffff]
bus: 00 [mem 0x140000000-0xfcffffffff]
bus: [bus 18-ff] on node 0 link 2
bus: 18 [io 0x3000-0x4fff]
bus: 18 [mem 0xdf300000-0xdfffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x2fff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xdd000000-0xdf2fffff window]
pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
pci 0000:00:01.1: reg 0x10: [io 0x0000-0x001f]
pci 0000:00:01.1: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:01.1: reg 0x24: [io 0x5040-0x507f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xdd000fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
pci 0000:00:06.0: reg 0x20: [io 0x1400-0x140f]
pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
pci 0000:00:07.0: reg 0x10: [io 0x1440-0x1447]
pci 0000:00:07.0: reg 0x14: [io 0x1434-0x1437]
pci 0000:00:07.0: reg 0x18: [io 0x1438-0x143f]
pci 0000:00:07.0: reg 0x1c: [io 0x1430-0x1433]
pci 0000:00:07.0: reg 0x20: [io 0x1410-0x141f]
pci 0000:00:07.0: reg 0x24: [mem 0xdd001000-0xdd001fff]
pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
pci 0000:00:08.0: reg 0x10: [io 0x1458-0x145f]
pci 0000:00:08.0: reg 0x14: [io 0x144c-0x144f]
pci 0000:00:08.0: reg 0x18: [io 0x1450-0x1457]
pci 0000:00:08.0: reg 0x1c: [io 0x1448-0x144b]
pci 0000:00:08.0: reg 0x20: [io 0x1420-0x142f]
pci 0000:00:08.0: reg 0x24: [mem 0xdd002000-0xdd002fff]
pci 0000:00:09.0: [10de:005c] type 01 class 0x060401
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: System wakeup disabled by ACPI
pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
pci 0000:01:06.0: [1002:4752] type 00 class 0x030000
pci 0000:01:06.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:06.0: reg 0x14: [io 0x2000-0x20ff]
pci 0000:01:06.0: reg 0x18: [mem 0xdd100000-0xdd100fff]
pci 0000:01:06.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:06.0: supports D1 D2
pci 0000:01:08.0: [8086:1229] type 00 class 0x020000
pci 0000:01:08.0: reg 0x10: [mem 0xdd101000-0xdd101fff]
pci 0000:01:08.0: reg 0x14: [io 0x2400-0x243f]
pci 0000:01:08.0: reg 0x18: [mem 0xdd120000-0xdd13ffff]
pci 0000:01:08.0: supports D1 D2
pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:09.0: bridge window [mem 0xdd100000-0xdeffffff]
pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0x0d00-0x2fff window] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0xdd000000-0xdf2fffff window] (subtractive decode)
pci 0000:00:0d.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:0370] type 01 class 0x060400
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.2: [8086:0372] type 01 class 0x060400
pci 0000:03:00.2: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0e.0: PCI bridge to [bus 03-05]
pci 0000:00:0e.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci 0000:04:0e.0: [105a:8350] type 00 class 0x010400
pci 0000:04:0e.0: reg 0x10: [mem 0xdf000000-0xdf000fff]
pci 0000:04:0e.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:0e.0: supports D1
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci 0000:03:00.2: PCI bridge to [bus 05]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Root Bridge [PCI2] (domain 0000 [bus 18-7f])
acpi PNP0A03:01: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:01: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:18
pci_bus 0000:18: busn_res: can not insert [bus 18-7f] under domain [bus 00-ff] (conflicts with (null) [bus 00-7f])
pci_bus 0000:18: root bus resource [bus 18-7f]
pci_bus 0000:18: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:18: root bus resource [io 0x3000-0x4fff window]
pci_bus 0000:18: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:18: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:18: root bus resource [mem 0xdf300000-0xdfffffff window]
pci 0000:18:0a.0: [1022:7450] type 01 class 0x060400
pci 0000:18:0a.1: [1022:7451] type 00 class 0x080010
pci 0000:18:0a.1: reg 0x10: [mem 0xdf300000-0xdf300fff 64bit]
pci 0000:18:0b.0: [1022:7450] type 01 class 0x060400
pci 0000:18:0b.1: [1022:7451] type 00 class 0x080010
pci 0000:18:0b.1: reg 0x10: [mem 0xdf301000-0xdf301fff 64bit]
pci 0000:19:02.0: [8086:1079] type 00 class 0x020000
pci 0000:19:02.0: reg 0x10: [mem 0xdf400000-0xdf41ffff 64bit]
pci 0000:19:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:19:02.0: PME# supported from D0 D3hot D3cold
pci 0000:19:02.1: [8086:1079] type 00 class 0x020000
pci 0000:19:02.1: reg 0x10: [mem 0xdf420000-0xdf43ffff 64bit]
pci 0000:19:02.1: reg 0x20: [io 0x3040-0x307f]
pci 0000:19:02.1: PME# supported from D0 D3hot D3cold
pci 0000:19:03.0: [8086:1079] type 00 class 0x020000
pci 0000:19:03.0: reg 0x10: [mem 0xdf440000-0xdf45ffff 64bit]
pci 0000:19:03.0: reg 0x20: [io 0x3080-0x30bf]
pci 0000:19:03.0: PME# supported from D0 D3hot D3cold
pci 0000:19:03.1: [8086:1079] type 00 class 0x020000
pci 0000:19:03.1: reg 0x10: [mem 0xdf460000-0xdf47ffff 64bit]
pci 0000:19:03.1: reg 0x20: [io 0x30c0-0x30ff]
pci 0000:19:03.1: PME# supported from D0 D3hot D3cold
pci 0000:18:0a.0: PCI bridge to [bus 19]
pci 0000:18:0a.0: bridge window [io 0x3000-0x3fff]
pci 0000:18:0a.0: bridge window [mem 0xdf400000-0xdf4fffff]
pci 0000:1a:03.0: [8086:1079] type 00 class 0x020000
pci 0000:1a:03.0: reg 0x10: [mem 0xdf500000-0xdf51ffff 64bit]
pci 0000:1a:03.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:1a:03.0: PME# supported from D0 D3hot D3cold
pci 0000:1a:03.1: [8086:1079] type 00 class 0x020000
pci 0000:1a:03.1: reg 0x10: [mem 0xdf520000-0xdf53ffff 64bit]
pci 0000:1a:03.1: reg 0x20: [io 0x4040-0x407f]
pci 0000:1a:03.1: PME# supported from D0 D3hot D3cold
pci 0000:1a:09.0: [14e4:1648] type 00 class 0x020000
pci 0000:1a:09.0: reg 0x10: [mem 0xdf540000-0xdf54ffff 64bit]
pci 0000:1a:09.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:1a:09.0: PME# supported from D3hot D3cold
pci 0000:1a:09.1: [14e4:1648] type 00 class 0x020000
pci 0000:1a:09.1: reg 0x10: [mem 0xdf550000-0xdf55ffff 64bit]
pci 0000:1a:09.1: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:1a:09.1: PME# supported from D3hot D3cold
pci 0000:18:0b.0: PCI bridge to [bus 1a]
pci 0000:18:0b.0: bridge window [io 0x4000-0x4fff]
pci 0000:18:0b.0: bridge window [mem 0xdf500000-0xdf5fffff]
pci_bus 0000:18: on NUMA node 0
ACPI: Enabled 1 GPEs in block 00 to 1F
vgaarb: device added: PCI:0000:01:06.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:06.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:01.1: can't claim BAR 4 [io 0x5000-0x503f]: no compatible bridge window
pci 0000:00:01.1: can't claim BAR 5 [io 0x5040-0x507f]: no compatible bridge window
Expanded resource reserved due to conflict with PCI Bus 0000:18
e820: reserve RAM buffer [mem 0x00098800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbff20000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:00: [mem 0xfefff000-0xfeffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x8000-0x807f] could not be reserved
system 00:01: [io 0x8080-0x80ff] has been reserved
system 00:01: [io 0x8400-0x847f] has been reserved
system 00:01: [io 0x8480-0x84ff] has been reserved
system 00:01: [io 0x8800-0x887f] has been reserved
system 00:01: [io 0x8880-0x88ff] has been reserved
system 00:01: [io 0x5000-0x503f] has been reserved
system 00:01: [io 0x5040-0x507f] has been reserved
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: disabling [io 0x0010-0x001f] because it overlaps 0000:00:01.1 BAR 0 [io 0x0000-0x001f]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0600-0x065e] has been reserved
system 00:02: [io 0x9000-0x907f] has been reserved
system 00:02: [io 0x9080-0x90ff] has been reserved
system 00:02: [io 0x9200-0x927f] has been reserved
system 00:02: [io 0x9280-0x92ff] has been reserved
system 00:02: [io 0x9400-0x947f] has been reserved
system 00:02: [io 0x9480-0x94ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [dma 2]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
Switched to clocksource acpi_pm
pci 0000:00:09.0: BAR 15: assigned [mem 0xdf100000-0xdf1fffff pref]
pci 0000:00:01.1: BAR 4: assigned [io 0x1000-0x103f]
pci 0000:00:01.1: BAR 5: assigned [io 0x1040-0x107f]
pci 0000:00:01.1: BAR 0: assigned [io 0x1080-0x109f]
pci 0000:01:06.0: BAR 6: assigned [mem 0xdf100000-0xdf11ffff pref]
pci 0000:00:09.0: PCI bridge to [bus 01]
pci 0000:00:09.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:09.0: bridge window [mem 0xdd100000-0xdeffffff]
pci 0000:00:09.0: bridge window [mem 0xdf100000-0xdf1fffff pref]
pci 0000:00:0d.0: PCI bridge to [bus 02]
pci 0000:04:0e.0: BAR 6: assigned [mem 0xdf010000-0xdf01ffff pref]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci 0000:03:00.2: PCI bridge to [bus 05]
pci 0000:00:0e.0: PCI bridge to [bus 03-05]
pci 0000:00:0e.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0x2fff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xdd000000-0xdf2fffff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xdd100000-0xdeffffff]
pci_bus 0000:01: resource 2 [mem 0xdf100000-0xdf1fffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:01: resource 5 [io 0x0d00-0x2fff window]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:01: resource 8 [mem 0xdd000000-0xdf2fffff window]
pci_bus 0000:03: resource 1 [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:04: resource 1 [mem 0xdf000000-0xdf0fffff]
pci 0000:18:0a.0: PCI bridge to [bus 19]
pci 0000:18:0a.0: bridge window [io 0x3000-0x3fff]
pci 0000:18:0a.0: bridge window [mem 0xdf400000-0xdf4fffff]
pci 0000:1a:09.0: BAR 6: assigned [mem 0xdf560000-0xdf56ffff pref]
pci 0000:1a:09.1: BAR 6: assigned [mem 0xdf570000-0xdf57ffff pref]
pci 0000:18:0b.0: PCI bridge to [bus 1a]
pci 0000:18:0b.0: bridge window [io 0x4000-0x4fff]
pci 0000:18:0b.0: bridge window [mem 0xdf500000-0xdf5fffff]
pci_bus 0000:18: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:18: resource 5 [io 0x3000-0x4fff window]
pci_bus 0000:18: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:18: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:18: resource 8 [mem 0xdf300000-0xdfffffff window]
pci_bus 0000:19: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:19: resource 1 [mem 0xdf400000-0xdf4fffff]
pci_bus 0000:1a: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:1a: resource 1 [mem 0xdf500000-0xdf5fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:01:06.0: Boot video device
pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
pci 0000:03:00.0: rerouting interrupts for [8086:0370]
pci 0000:03:00.2: rerouting interrupts for [8086:0372]
pci 0000:18:0a.0: MSI quirk detected; subordinate MSI disabled
pci 0000:18:0b.0: MSI quirk detected; subordinate MSI disabled
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 19660k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Simple Boot Flag at 0x36 set to 0x1
sha1_ssse3: Neither AVX nor AVX2 nor SSSE3/SHA-NI is available/usable.
sha256_ssse3: Neither AVX nor SSSE3/SHA-NI is available/usable.
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1525420462.833:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7577
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:02.0: OHCI PCI host controller
ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci-pci 0000:00:02.0: irq 23, io mem 0xdd000000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI PCI host controller
usb usb1: Manufacturer: Linux 3.10.0-693.21.1.el7.x86_64 ohci_hcd
usb usb1: SerialNumber: 0000:00:02.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: AMD CPU family 0xf not supported
PM: Hibernation image not present or could not be loaded.
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: 03da6092f6711321b5ace12e845da97336f7674d'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
Magic number: 2:923:924
rtc_cmos 00:03: setting system clock to 2018-05-04 07:54:23 UTC (1525420463)
Freeing unused kernel memory: 1792k freed
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
FDC 0 is a post-1991 82077
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 19
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
libata version 3.00 loaded.
pata_amd 0000:00:06.0: version 0.4.1
scsi host1: pata_amd
tg3.c:v3.137 (May 11, 2014)
scsi host2: pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1400 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1408 irq 15
sata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
scsi host3: sata_nv
scsi host4: sata_nv
ata3: SATA max UDMA/133 cmd 0x1440 ctl 0x1434 bmdma 0x1410 irq 22
ata4: SATA max UDMA/133 cmd 0x1438 ctl 0x1430 bmdma 0x1418 irq 22
ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 21
scsi host0: stex
scsi host5: sata_nv
scsi 0:0:0:0: Direct-Access Promise 5+3 Disk RAID6 1.10 PQ: 0 ANSI: 2
scsi host6: sata_nv
ata5: SATA max UDMA/133 cmd 0x1458 ctl 0x144c bmdma 0x1420 irq 21
ata6: SATA max UDMA/133 cmd 0x1450 ctl 0x1448 bmdma 0x1428 irq 21
scsi 0:0:16:0: Processor Promise RAID Console 1.00 PQ: 0 ANSI: 3
tg3 0000:1a:09.0 eth0: Tigon3 [partno(BCM95704A7) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:e0:81:4a:36:5a
tg3 0000:1a:09.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:1a:09.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:1a:09.0 eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
ata1.00: ATA-0: M-Systems iDOC V1.13, 060726, max MWDMA2
ata1.00: 512000 sectors, multi 0: LBA
ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0x0) ACPI=0x39f (120:600:0x12)
ata1.00: configured for MWDMA2
scsi 1:0:0:0: Direct-Access ATA M-Systems iDOC V 26 PQ: 0 ANSI: 5
ata2: port disabled--ignoring
tg3 0000:1a:09.1 eth1: Tigon3 [partno(BCM95704A7) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:e0:81:4a:36:5b
tg3 0000:1a:09.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:1a:09.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:1a:09.1 eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
e1000 0000:19:02.0 eth0: (PCI-X:133MHz:64-bit) 00:e0:ed:08:da:5a
e1000 0000:19:02.0 eth0: Intel(R) PRO/1000 Network Connection
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
e1000 0000:19:02.1 eth1: (PCI-X:133MHz:64-bit) 00:e0:ed:08:da:5b
e1000 0000:19:02.1 eth1: Intel(R) PRO/1000 Network Connection
ata4: SATA link down (SStatus 0 SControl 300)
e1000 0000:19:03.0 eth2: (PCI-X:133MHz:64-bit) 00:e0:ed:08:da:5c
e1000 0000:19:03.0 eth2: Intel(R) PRO/1000 Network Connection
ata6: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
sd 1:0:0:0: [sdb] 512000 512-byte logical blocks: (262 MB/250 MiB)
sd 0:0:0:0: [sda] 4883210240 512-byte logical blocks: (2.50 TB/2.27 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 12 00 00
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
sdb:
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
sd 0:0:0:0: [sda] Attached SCSI disk
e1000 0000:19:03.1 eth3: (PCI-X:133MHz:64-bit) 00:e0:ed:08:da:5d
e1000 0000:19:03.1 eth3: Intel(R) PRO/1000 Network Connection
e1000 0000:1a:03.0 eth4: (PCI-X:100MHz:64-bit) 00:e0:ed:08:da:68
e1000 0000:1a:03.0 eth4: Intel(R) PRO/1000 Network Connection
e1000 0000:1a:03.1 eth5: (PCI-X:100MHz:64-bit) 00:e0:ed:08:da:69
e1000 0000:1a:03.1 eth5: Intel(R) PRO/1000 Network Connection
random: fast init done
random: crng init done
SGI XFS with ACLs, security attributes, no debug enabled
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Ending clean mount
systemd-journald[98]: Received SIGTERM from PID 1 (systemd).
type=1404 audit(1525420467.731:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 106013 rules.
SELinux: 2048 avtab hash slots, 106013 rules.
SELinux: 8 users, 14 roles, 4998 types, 307 bools, 1 sens, 1024 cats
SELinux: 94 classes, 106013 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
type=1403 audit(1525420468.233:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 526.430ms.
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd[1]: Relabelled /dev and /run in 29.339ms.
systemd-journald[494]: Received request to flush runtime journal from PID 1
shpchp 0000:18:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp 0000:18:0a.0: Cannot reserve MMIO region
shpchp 0000:18:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp 0000:18:0b.0: Cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i2c i2c-0: nForce2 SMBus adapter at 0x1000
i2c i2c-1: nForce2 SMBus adapter at 0x1040
sd 0:0:0:0: Attached scsi generic sg0 type 0
input: PC Speaker as /devices/platform/pcspkr/input/input2
scsi 0:0:16:0: Attached scsi generic sg1 type 3
sd 1:0:0:0: Attached scsi generic sg2 type 0
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revE or earlier detected (node 0).
EDAC amd64: using x4 syndromes.
EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:18.3
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revE or earlier detected (node 1).
EDAC amd64: using x4 syndromes.
EDAC MC1: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:19.3
EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
powernow_k8: [Firmware Bug]: No compatible ACPI _PSS objects found.
[Firmware Bug]: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: If that doesn't help, try upgrading your BIOS.
powernow_k8: [Firmware Bug]: No compatible ACPI _PSS objects found.
[Firmware Bug]: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: If that doesn't help, try upgrading your BIOS.
ppdev: user-space parallel port driver
Adding 4063228k swap on /dev/mapper/centos-swap. Priority:-1 extents:1 across:4063228k FS
XFS (sda2): Mounting V5 Filesystem
XFS (sda2): Ending clean mount
XFS (dm-2): Mounting V5 Filesystem
XFS (dm-2): Ending clean mount
type=1305 audit(1525420474.755:4): audit_pid=632 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
w83627hf: w83627hf: Found W83627HF chip at 0x290
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
IPv6: ADDRCONF(NETDEV_UP): enp26s9f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp26s9f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp26s9f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp26s9f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp25s2f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp25s2f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp25s2f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp25s2f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp25s3f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp25s3f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp25s3f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp25s3f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp26s3f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp26s3f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp26s3f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp26s3f1: link is not ready
tg3 0000:1a:09.0 enp26s9f0: Link is up at 1000 Mbps, full duplex
tg3 0000:1a:09.0 enp26s9f0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp26s9f0: link becomes ready
perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3134 > 3132), lowering kernel.perf_event_max_sample_rate to 63000