dmesg - Average_Computer
microcode: microcode updated early to revision 0x22, date = 2017-01-27
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-693.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Tue Aug 22 21:09:27 UTC 2017
Command line: BOOT_IMAGE=/vmlinuz-3.10.0-693.el7.x86_64 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=en_US.UTF-8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cbca5fff] usable
BIOS-e820: [mem 0x00000000cbca6000-0x00000000cbcacfff] ACPI NVS
BIOS-e820: [mem 0x00000000cbcad000-0x00000000cc5defff] usable
BIOS-e820: [mem 0x00000000cc5df000-0x00000000cc853fff] reserved
BIOS-e820: [mem 0x00000000cc854000-0x00000000de365fff] usable
BIOS-e820: [mem 0x00000000de366000-0x00000000de3fdfff] reserved
BIOS-e820: [mem 0x00000000de3fe000-0x00000000de447fff] usable
BIOS-e820: [mem 0x00000000de448000-0x00000000de503fff] ACPI NVS
BIOS-e820: [mem 0x00000000de504000-0x00000000df7fefff] reserved
BIOS-e820: [mem 0x00000000df7ff000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041dffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. P85-D3/P85-D3, BIOS FD 08/18/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FF0000000 write-back
2 base 0410000000 mask 7FF8000000 write-back
3 base 0418000000 mask 7FFC000000 write-back
4 base 041C000000 mask 7FFE000000 write-back
5 base 00E0000000 mask 7FE0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 256MB, type WB
reg 2, base: 16640MB, range: 128MB, type WB
reg 3, base: 16768MB, range: 64MB, type WB
reg 4, base: 16832MB, range: 32MB, type WB
reg 5, base: 3584MB, range: 512MB, type UC
total RAM covered: 16352M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16G num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 16GB, range: 256MB, type WB
reg 3, base: 16640MB, range: 128MB, type WB
reg 4, base: 16768MB, range: 64MB, type WB
reg 5, base: 16832MB, range: 32MB, type WB
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd740-0x000fd74f] mapped at [ffff8800000fd740]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
BRK [0x01fea000, 0x01feafff] PGTABLE
BRK [0x01feb000, 0x01febfff] PGTABLE
BRK [0x01fec000, 0x01fecfff] PGTABLE
BRK [0x01fed000, 0x01fedfff] PGTABLE
BRK [0x01fee000, 0x01feefff] PGTABLE
BRK [0x01fef000, 0x01feffff] PGTABLE
BRK [0x01ff0000, 0x01ff0fff] PGTABLE
BRK [0x01ff1000, 0x01ff1fff] PGTABLE
RAMDISK: [mem 0x352aa000-0x3694cfff]
Early table checksum verification disabled
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000de4d0078 00074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000de4dcee8 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000de4d0188 0CD5A (v02 ALASKA A M I 00000088 INTL 20091112)
ACPI: FACS 00000000de502080 00040
ACPI: APIC 00000000de4dcff8 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000de4dd090 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000de4dd0d8 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 00000000de4dd618 00AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: MCFG 00000000de4de0f0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000de4de130 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000de4de168 00495 (v01 IdeRef IdeTable 00001000 INTL 20120711)
ACPI: SSDT 00000000de4de600 034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: DMAR 00000000de4e1ae8 00080 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041dffffff]
NODE_DATA(0) allocated [mem 0x41dfd7000-0x41dffdfff]
Reserving 161MB of memory at 688MB for crashkernel (System RAM: 16320MB)
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41dffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xcbca5fff]
node 0: [mem 0xcbcad000-0xcc5defff]
node 0: [mem 0xcc854000-0xde365fff]
node 0: [mem 0xde3fe000-0xde447fff]
node 0: [mem 0xdf7ff000-0xdf7fffff]
node 0: [mem 0x100000000-0x41dffffff]
Initmem setup node 0 [mem 0x00001000-0x41dffffff]
On node 0 totalpages: 4178130
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 14149 pages used for memmap
DMA32 zone: 905525 pages, LIFO batch:31
Normal zone: 51072 pages used for memmap
Normal zone: 3268608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcbca6000-0xcbcacfff]
PM: Registered nosave memory: [mem 0xcc5df000-0xcc853fff]
PM: Registered nosave memory: [mem 0xde366000-0xde3fdfff]
PM: Registered nosave memory: [mem 0xde448000-0xde503fff]
PM: Registered nosave memory: [mem 0xde504000-0xdf7fefff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88041dc00000 s97048 r8192 d29928 u262144
pcpu-alloc: s97048 r8192 d29928 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4112824
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-693.el7.x86_64 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=en_US.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 5465204k/17268736k available (6886k kernel code, 556216k absent, 534144k reserved, 4545k data, 1764k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8.
NR_IRQS:327936 nr_irqs:488 0
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
tsc: Detected 3591.755 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7183.51 BogoMIPS (lpj=3591755)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 26584 entries in 104 pages
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
DMAR: RMRR base: 0x000000df6c4000 end: 0x000000df6d2fff
DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (57468.08 BogoMIPS)
node 0 initialised, 2678293 pages in 43ms
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcbca6000-0xcbcacfff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xde448000-0xde503fff] (770048 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 11:18:17, date: 04/25/18
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff88041dbcc000 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff88041d7ca000 005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff88041d7c1800 00119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7f1a000-0xf7f1a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
pci 0000:00:16.3: reg 0x14: [mem 0xf7f18000-0xf7f18fff]
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7f16000-0xf7f163ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 0x24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: [8086:8c08] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 0x20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 0x24: [io 0xf020-0xf02f]
pci 0000:01:00.0: [1002:6811] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf7e00000-0xf7e3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xf7dc0000-0xf7ddffff]
pci 0000:02:00.0: reg 0x14: [mem 0xf7d00000-0xf7d7ffff]
pci 0000:02:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:02:00.0: reg 0x1c: [mem 0xf7de0000-0xf7de3fff]
pci 0000:02:00.0: reg 0x30: [mem 0xf7d80000-0xf7dbffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
pci 0000:04:03.0: [1102:0007] type 00 class 0x040100
pci 0000:04:03.0: reg 0x10: [io 0xc000-0xc01f]
pci 0000:04:03.0: supports D1 D2
pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:03:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
pci 0000:05:00.0: [1000:0058] type 00 class 0x010000
pci 0000:05:00.0: reg 0x10: [io 0xb000-0xb0ff]
pci 0000:05:00.0: reg 0x14: [mem 0xf7c10000-0xf7c13fff 64bit]
pci 0000:05:00.0: reg 0x1c: [mem 0xf7c00000-0xf7c0ffff 64bit]
pci 0000:05:00.0: reg 0x30: [mem 0xf7a00000-0xf7bfffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7cfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcbca6000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcc5df000-0xcfffffff]
e820: reserve RAM buffer [mem 0xde366000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde448000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41e000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:0a: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 12 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:03: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:03: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:03: resource 10 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:03: resource 11 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:03: resource 12 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 4 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 5 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 6 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 7 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xf7a00000-0xf7cfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 23180k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xda366000-0xde366000] (64MB) mapped at [ffff8800da366000-ffff8800de365fff]
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
sha1_ssse3: Using AVX optimized SHA-1 implementation
sha256_ssse3: Using AVX2 optimized SHA-256 implementation
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1524655097.399:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31643
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 25 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
0000:00:16.3: ttyS2 at I/O 0xf0e0 (irq = 19) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f17000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-693.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f16000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-693.el7.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 26 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-693.el7.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-693.el7.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x22
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x22
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x22
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x22
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x22
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x22
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x22
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x22
microcode: Microcode Update Driver: v2.01 , Peter Oruba
PM: Hibernation image not present or could not be loaded.
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: da187dca7dbe53ab05bd13bd0c4e21f422b6a49c'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
Magic number: 14:303:328
rtc_cmos 00:02: setting system clock to 2018-04-25 11:18:18 UTC (1524655098)
Freeing unused kernel memory: 1764k freed
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Journal Service...
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.20
mptbase: ioc0: Initiating bringup
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:02:00.0: irq 27 for MSI/MSI-X
e1000e 0000:02:00.0: irq 28 for MSI/MSI-X
e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
[drm] Initialized
e1000e 0000:02:00.0 (unregistered net_device): registered PHC clock
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
[drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6811 0x174B:0xE271 0x00).
[drm] register mmio base: 0xF7E00000
[drm] register mmio size: 262144
ATOM BIOS: C63001
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 8101672 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading pitcairn Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
usb 1-1: new high-speed USB device number 2 using ehci-pci
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 50.0.1 / 17!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880407260c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880407260c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880407260c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880407260c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880407260c10
usb 2-1: new high-speed USB device number 2 using ehci-pci
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001e35a18
e1000e 0000:02:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:05:ca:66:5f:4d
e1000e 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0 eth0: MAC: 3, PHY: 8, PBA No: E46981-008
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff880407260c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff880407260c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: irq 30 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
ata_piix 0000:00:1f.5: MAP [
P0 -- P1 -- ]
usb 3-6: new low-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
ioc0: LSISAS1068E B3: Capabilities={Initiator}
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 5 usecs
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
ata2.00: ATA-8: OCZ-VERTEX460, 1.0, max UDMA/133
ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX460 1.0 PQ: 0 ANSI: 5
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
usb 3-6: New USB device found, idVendor=046d, idProduct=c31c
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-6: Product: USB Keyboard
usb 3-6: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/input/input2
hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-6/input0
random: fast init done
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/input/input3
[drm] ring test on 6 succeeded in 27 usecs
[drm] ring test on 7 succeeded in 4 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-6/input1
tsc: Refined TSC clocksource calibration: 3591.682 MHz
Switched to clocksource tsc
[drm] ib test on ring 5 succeeded
sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:00:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:00:4b:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:a0:4b:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:a8:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:a8:4b:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:a8:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:a8:4a:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:70:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:70:4b:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:b0:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:b0:4a:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/133
ata2: EH complete
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
ata2.00: limiting speed to UDMA/100:PIO4
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:20:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:20:4a:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2: soft resetting link
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:60:49:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:60:49:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:08:49:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:08:49:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:d0:48:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:d0:48:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:20:48:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:20:48:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:e0:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:e0:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:d0:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:d0:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: limiting speed to UDMA/33:PIO4
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:f8:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:f8:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2: soft resetting link
[drm] ib test on ring 6 succeeded
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:d8:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:d8:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:10:e8:47:f9/00:00:00:00:00/ed tag 0 dma 8192 in
res 51/04:10:e8:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:20:00:48:f9/00:00:00:00:00/ed tag 0 dma 16384 in
res 51/04:20:00:48:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:a8:28:48:f9/00:00:00:00:00/ed tag 0 dma 86016 in
res 51/04:a8:28:48:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:28:d8:48:f9/00:00:00:00:00/ed tag 0 dma 20480 in
res 51/04:28:d8:48:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:00:49:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:00:49:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:50:10:49:f9/00:00:00:00:00/ed tag 0 dma 40960 in
res 51/04:50:10:49:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:98:68:49:f9/00:00:00:00:00/ed tag 0 dma 77824 in
res 51/04:98:68:49:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:80:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:80:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:f0:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:f0:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:f8:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:f8:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:f8:46:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:f8:46:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD4
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD5
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 3:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY1
[drm] fb mappable at 0xE05D8000
[drm] vram apper at 0xE0000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0
scsi host4: ioc0: LSISAS1068E B3, FwRev=01172b00h, Ports=1, MaxQ=163, IRQ=16
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:80:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:80:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:f0:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:f0:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:80:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:80:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:f0:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:f0:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:20:00:0d:f9/00:00:00:00:00/ed tag 0 dma 16384 in
res 51/04:20:00:0d:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:48:b8:0d:f9/00:00:00:00:00/ed tag 0 dma 36864 in
res 51/04:48:b8:0d:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:70:00:0e:f9/00:00:00:00:00/ed tag 0 dma 57344 in
res 51/04:70:00:0e:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:80:78:0e:f9/00:00:00:00:00/ed tag 0 dma 65536 in
res 51/04:80:78:0e:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:78:08:0f:f9/00:00:00:00:00/ed tag 0 dma 61440 in
res 51/04:78:08:0f:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:38:88:0f:f9/00:00:00:00:00/ed tag 0 dma 28672 in
res 51/04:38:88:0f:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:48:b8:0d:f9/00:00:00:00:00/ed tag 0 dma 36864 in
res 51/04:48:b8:0d:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:80:78:0e:f9/00:00:00:00:00/ed tag 0 dma 65536 in
res 51/04:80:78:0e:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:38:88:0f:f9/00:00:00:00:00/ed tag 0 dma 28672 in
res 51/04:38:88:0f:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:80:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:80:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:f0:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:f0:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:20:00:0d:f9/00:00:00:00:00/ed tag 0 dma 16384 in
res 51/04:20:00:0d:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:48:b8:0d:f9/00:00:00:00:00/ed tag 0 dma 36864 in
res 51/04:48:b8:0d:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:70:00:0e:f9/00:00:00:00:00/ed tag 0 dma 57344 in
res 51/04:70:00:0e:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:80:78:0e:f9/00:00:00:00:00/ed tag 0 dma 65536 in
res 51/04:80:78:0e:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:78:08:0f:f9/00:00:00:00:00/ed tag 0 dma 61440 in
res 51/04:78:08:0f:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:38:88:0f:f9/00:00:00:00:00/ed tag 0 dma 28672 in
res 51/04:38:88:0f:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
SGI XFS with ACLs, security attributes, no debug enabled
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Ending clean mount
systemd-journald[133]: Received SIGTERM from PID 1 (systemd).
type=1404 audit(1524655111.944:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 106122 rules.
SELinux: 2048 avtab hash slots, 106122 rules.
SELinux: 8 users, 14 roles, 5004 types, 307 bools, 1 sens, 1024 cats
SELinux: 94 classes, 106122 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
type=1403 audit(1524655112.159:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 221.480ms.
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd[1]: Relabelled /dev and /run in 23.195ms.
systemd-journald[537]: Received request to flush runtime journal from PID 1
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input5
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
mei_me 0000:00:16.0: irq 31 for MSI/MSI-X
sd 1:0:0:0: Attached scsi generic sg0 type 0
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:00:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:00:4b:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:a0:4b:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
ppdev: user-space parallel port driver
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:a8:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:a8:4b:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:a8:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:a8:4a:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:70:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:70:4b:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:b0:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:b0:4a:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:20:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:20:4a:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:60:49:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:60:49:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:08:49:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:08:49:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:d0:48:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:d0:48:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:20:48:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:20:48:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:e0:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:e0:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:d0:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:d0:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:f8:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:f8:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:00:00:46:f9/00:00:00:00:00/ed tag 0 dma 131072 in
res 51/04:00:00:46:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:d0:00:47:f9/00:00:00:00:00/ed tag 0 dma 106496 in
res 51/04:d0:00:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:d8:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:d8:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:10:e8:47:f9/00:00:00:00:00/ed tag 0 dma 8192 in
res 51/04:10:e8:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:20:00:48:f9/00:00:00:00:00/ed tag 0 dma 16384 in
res 51/04:20:00:48:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:a8:28:48:f9/00:00:00:00:00/ed tag 0 dma 86016 in
res 51/04:a8:28:48:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:28:d8:48:f9/00:00:00:00:00/ed tag 0 dma 20480 in
res 51/04:28:d8:48:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:00:49:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:00:49:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:50:10:49:f9/00:00:00:00:00/ed tag 0 dma 40960 in
res 51/04:50:10:49:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:98:68:49:f9/00:00:00:00:00/ed tag 0 dma 77824 in
res 51/04:98:68:49:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:80:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:80:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:f0:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:f0:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:f8:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:f8:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:f8:46:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:f8:46:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
snd_ca0106 0000:04:03.0: Model 1013 Rev 00000000 Serial 10131102
snd_hda_intel 0000:00:1b.0: irq 32 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 33 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input6
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input7
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input8
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input10
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input11
snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D2: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC1D2: inputs:
snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D2: Line=0x1a
snd_hda_codec_realtek hdaudioC1D2: CD=0x1c
snd_hda_codec_realtek hdaudioC1D2: dig-in=0x1f
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:80:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:80:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:f0:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:f0:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
Adding 8191996k swap on /dev/mapper/centos-swap. Priority:-1 extents:1 across:8191996k SSFS
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for crc32 (crc32-pclmul)
XFS (sda1): Mounting V5 Filesystem
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
XFS (sda1): Ending clean mount
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:80:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:80:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:f0:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:f0:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
XFS (dm-2): Mounting V5 Filesystem
XFS (dm-2): Ending clean mount
type=1305 audit(1524655115.392:4): audit_pid=747 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
e1000e: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
random: crng init done
This update supersedes microcode provided by Red Hat with the CVE-2017-5715 (“Spectre”)
CPU branch injection vulnerability mitigation. (Historically, Red Hat has provided updated
microcode, developed by our microprocessor partners, as a customer convenience.) Further
testing has uncovered problems with the microcode provided along with the “Spectre” mitigation
that could lead to system instabilities. As a result, Red Hat is providing an microcode update
that reverts to the last known good microcode version dated before 03 January 2018.
Red Hat strongly recommends that customers contact their hardware provider for the latest microcode updates.
IMPORTANT: Customers using Intel Skylake-, Broadwell-, and Haswell-based platforms must obtain and
install updated microcode from their hardware vendor immediately. The "Spectre" mitigation requires
both an updated kernel from Red Hat and updated microcode from your hardware vendor.
SELinux: 2048 avtab hash slots, 106013 rules.
SELinux: 2048 avtab hash slots, 106013 rules.
SELinux: 8 users, 14 roles, 4998 types, 307 bools, 1 sens, 1024 cats
SELinux: 94 classes, 106013 rules
SELinux: Context system_u:unconfined_r:sandbox_t:s0-s0:c0.c1023 became invalid (unmapped).
SELinux: Context unconfined_u:unconfined_r:sandbox_t:s0-s0:c0.c1023 became invalid (unmapped).
This update supersedes microcode provided by Red Hat with the CVE-2017-5715 (“Spectre”)
CPU branch injection vulnerability mitigation. (HIstorically, Red Hat has provided updated
microcode, developed by our microprocessor partners, as a customer convenience.) Further
testing has uncovered problems with the microcode provided along with the “Spectre” mitigation
that could lead to system instabilities. As a result, Red Hat is providing an microcode update
that reverts to the last known good microcode version dated before 03 January 2018.
Red Hat strongly recommends that customers contact their hardware provider for the latest microcode updates.
IMPORTANT: Customers using Intel Skylake-, Broadwell-, and Haswell-based platforms must obtain and
install updated microcode from their hardware vendor immediately. The "Spectre" mitigation requires
both an updated kernel from Red Hat and updated microcode from your hardware vendor.
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:80:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:80:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:f0:47:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:f0:47:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x24
ata2.00: failed command: READ DMA
ata2.00: cmd c8/00:08:a8:45:f9/00:00:00:00:00/ed tag 0 dma 4096 in
res 51/04:08:a8:45:f9/00:00:00:00:00/ed Emask 0x1 (device error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { ABRT }
ata2.00: configured for UDMA/33
ata2: EH complete
fuse init (API version 7.22)
perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3146 > 3137), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (4017 > 3932), lowering kernel.perf_event_max_sample_rate to 49000
perf: interrupt took too long (5058 > 5021), lowering kernel.perf_event_max_sample_rate to 39000
perf: interrupt took too long (6323 > 6322), lowering kernel.perf_event_max_sample_rate to 31000
perf: interrupt took too long (7930 > 7903), lowering kernel.perf_event_max_sample_rate to 25000