dmesg - navjaro-custom-kernel
Linux version 4.17.0-rc3-navjaro (root@8250u) (gcc version 7.3.1 20180312 (GCC)) #3 SMP PREEMPT Mon Apr 30 13:14:17 EDT 2018
KERNEL supported cpus:
Intel GenuineIntel
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000061069fff] usable
BIOS-e820: [mem 0x000000006106a000-0x000000006106afff] ACPI NVS
BIOS-e820: [mem 0x000000006106b000-0x000000006106bfff] reserved
BIOS-e820: [mem 0x000000006106c000-0x000000008920dfff] usable
BIOS-e820: [mem 0x000000008920e000-0x000000008960dfff] type 20
BIOS-e820: [mem 0x000000008960e000-0x000000008a10dfff] reserved
BIOS-e820: [mem 0x000000008a10e000-0x000000008a7fdfff] ACPI NVS
BIOS-e820: [mem 0x000000008a7fe000-0x000000008affdfff] ACPI data
BIOS-e820: [mem 0x000000008affe000-0x000000008affefff] usable
BIOS-e820: [mem 0x000000008afff000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.50 by INSYDE Corp.
efi: ACPI 2.0=0x8affd014 SMBIOS=0x89648000 SMBIOS 3.0=0x89646000 ESRT=0x896441d8
SMBIOS 3.0.0 present.
DMI: HP HP Pavilion x360 Convertible 14m-ba1xx/83C4, BIOS F.38 02/23/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008C000000 mask 7FFC000000 uncachable
4 base 008B800000 mask 7FFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: last_pfn = 0x8afff max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000896441d8 to 0x0000000089644210.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 98000 size 24576
Using GB pages for direct mapping
BRK [0x22d557000, 0x22d557fff] PGTABLE
BRK [0x22d558000, 0x22d558fff] PGTABLE
BRK [0x22d559000, 0x22d559fff] PGTABLE
BRK [0x22d55a000, 0x22d55afff] PGTABLE
BRK [0x22d55b000, 0x22d55bfff] PGTABLE
BRK [0x22d55c000, 0x22d55cfff] PGTABLE
BRK [0x22d55d000, 0x22d55dfff] PGTABLE
BRK [0x22d55e000, 0x22d55efff] PGTABLE
BRK [0x22d55f000, 0x22d55ffff] PGTABLE
BRK [0x22d560000, 0x22d560fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x36f23000-0x37788fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008AFFD014 000024 (v02 HPQOEM)
ACPI: XSDT 0x000000008AFAD188 000124 (v01 HPQOEM SLIC-MPC 00000000 HP 01000013)
ACPI: FACP 0x000000008AFE4000 00010C (v05 HPQOEM SLIC-MPC 00000000 HP 00040000)
ACPI: DSDT 0x000000008AFB0000 030F98 (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
ACPI: FACS 0x000000008A7D4000 000040
ACPI: UEFI 0x000000008AFFC000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: UEFI 0x000000008AFFB000 000042 (v01 HPQOEM INSYDE 00000002 HP 00040000)
ACPI: SSDT 0x000000008AFF6000 004899 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: MSDM 0x000000008AFF5000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: SSDT 0x000000008AFF4000 0004C3 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008AFF3000 000046 (v02 HPQOEM INSYDE 00003000 ACPI 00040000)
ACPI: TPM2 0x000000008AFF2000 000034 (v03 HPQOEM INSYDE 00000000 HP 00040000)
ACPI: SSDT 0x000000008AFEF000 002F9F (v02 HPQOEM INSYDE 00003000 ACPI 00040000)
ACPI: SSDT 0x000000008AFEA000 004625 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008AFE9000 000895 (v02 HPQOEM INSYDE 00000000 ACPI 00040000)
ACPI: ASF! 0x000000008AFE8000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: ASPT 0x000000008AFE7000 000034 (v07 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: BOOT 0x000000008AFE6000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: DBGP 0x000000008AFE5000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: HPET 0x000000008AFE3000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: APIC 0x000000008AFE2000 00012C (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: MCFG 0x000000008AFE1000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: SSDT 0x000000008AFAF000 000517 (v02 HPQOEM INSYDE 00000000 ACPI 00040000)
ACPI: LPIT 0x000000008AFAE000 000094 (v01 HPQOEM INSYDE 00000000 HP 00040000)
ACPI: WSMT 0x000000008AFAC000 000028 (v01 HPQOEM INSYDE 00000000 HP 00040000)
ACPI: SSDT 0x000000008AFAB000 00029F (v02 HPQOEM INSYDE 00000000 ACPI 00040000)
ACPI: SSDT 0x000000008AFAA000 000346 (v01 HPQOEM INSYDE 00000000 ACPI 00040000)
ACPI: SSDT 0x000000008AFA6000 003002 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008AFA5000 00051E (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: DBGP 0x000000008AFA4000 000034 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
ACPI: DBG2 0x000000008AFA3000 000054 (v00 HPQOEM INSYDE 00000002 HP 00040000)
ACPI: SSDT 0x000000008AFA1000 0012E6 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008AF9F000 0017AE (v02 HPQOEM INSYDE 00003000 ACPI 00040000)
ACPI: DMAR 0x000000008AF9E000 0000F0 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: FPDT 0x000000008AF9D000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
ACPI: BGRT 0x000000008AF9C000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000026effffff]
NODE_DATA(0) allocated [mem 0x26effd000-0x26effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000026effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x0000000061069fff]
node 0: [mem 0x000000006106c000-0x000000008920dfff]
node 0: [mem 0x000000008affe000-0x000000008affefff]
node 0: [mem 0x0000000100000000-0x000000026effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
On node 0 totalpages: 2064809
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 8713 pages used for memmap
DMA32 zone: 557581 pages, LIFO batch:31
Normal zone: 23488 pages used for memmap
Normal zone: 1503232 pages, LIFO batch:31
Reserved but unavailable: 99 pages
Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: Registered nosave memory: [mem 0x6106a000-0x6106afff]
PM: Registered nosave memory: [mem 0x6106b000-0x6106bfff]
PM: Registered nosave memory: [mem 0x8920e000-0x8960dfff]
PM: Registered nosave memory: [mem 0x8960e000-0x8a10dfff]
PM: Registered nosave memory: [mem 0x8a10e000-0x8a7fdfff]
PM: Registered nosave memory: [mem 0x8a7fe000-0x8affdfff]
PM: Registered nosave memory: [mem 0x8afff000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
e820: [mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
random: get_random_bytes called from start_kernel+0x96/0x52e with crng_init=0
setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 44 pages/cpu @ (ptrval) s142168 r8192 d29864 u262144
pcpu-alloc: s142168 r8192 d29864 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 2032522
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7970636K/8259236K available (12300K kernel code, 1272K rwdata, 3132K rodata, 1420K init, 588K bss, 288600K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 28563 entries in 112 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180313
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000008a014000 end: 0x0000008a033fff
DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Detected 1800.000 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=1800000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (28800.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x6106a000-0x6106afff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8a10e000-0x8a7fdfff] (7274496 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 8:46:12, date: 05/01/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: 14 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF923B64E95800 00058B (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF923B64A74400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF923B64B51540 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF923B64E91800 000628 (v02 PmRef HwpLvt 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF923B64A7E000 000D14 (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF923B64A72800 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF923B64A75C00 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI: Power Resource [WRST] (on)
acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [mem 0xfe800000-0xfe80ffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xb1220000-0xb1227fff 64bit]
pci 0000:00:13.0: [8086:9d35] type 00 class 0x000000
pci 0000:00:13.0: reg 0x10: [mem 0xb1232000-0xb1232fff 64bit]
pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb1210000-0xb121ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xb1233000-0xb1233fff 64bit]
pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xb1234000-0xb1234fff 64bit]
pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0xb1235000-0xb1235fff 64bit]
pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb1236000-0xb1236fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xb1230000-0xb1231fff]
pci 0000:00:17.0: reg 0x14: [mem 0xb1239000-0xb12390ff]
pci 0000:00:17.0: reg 0x18: [io 0x3080-0x3087]
pci 0000:00:17.0: reg 0x1c: [io 0x3088-0x308b]
pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:17.0: reg 0x24: [mem 0xb1237000-0xb12377ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.1: [8086:9d19] type 01 class 0x060400
pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xb122c000-0xb122ffff]
pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xb1228000-0xb122bfff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xb1200000-0xb120ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xb1238000-0xb12380ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0x3040-0x305f]
pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000
pci 0000:01:00.0: reg 0x10: [mem 0xb1100000-0xb1100fff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1d.0: PCI bridge to [bus 01]
pci 0000:00:1d.0: bridge window [mem 0xb1100000-0xb11fffff]
pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xb1000000-0xb1001fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.1: PCI bridge to [bus 02]
pci 0000:00:1d.1: bridge window [mem 0xb1000000-0xb10fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x6106a000-0x63ffffff]
e820: reserve RAM buffer [mem 0x8920e000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8afff000-0x8bffffff]
e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x2000-0x20fe] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs ETD072b ETD0000 PNP0f13 (active)
system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0x90000000-0x9001ffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1d.0: PCI bridge to [bus 01]
pci 0000:00:1d.0: bridge window [mem 0xb1100000-0xb11fffff]
pci 0000:00:1d.1: PCI bridge to [bus 02]
pci 0000:00:1d.1: bridge window [mem 0xb1000000-0xb10fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: resource 22 [mem 0xfe800000-0xfe80ffff window]
pci_bus 0000:01: resource 1 [mem 0xb1100000-0xb11fffff]
pci_bus 0000:02: resource 1 [mem 0xb1000000-0xb10fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8600K
DMAR: ACPI device "device:73" under DMAR at fed91000 as 00:15.0
DMAR: ACPI device "device:74" under DMAR at fed91000 as 00:15.1
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x84c1b000-0x88c1b000] (64MB) mapped at [ (ptrval)- (ptrval)]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
clocksource: Switched to clocksource tsc
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=44 max_order=21 bucket_order=0
zbud: loaded
pstore: using deflate compression
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered (default)
io scheduler deadline registered
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:1d.0: AER enabled with IRQ 122
pcieport 0000:00:1d.1: AER enabled with IRQ 123
pcieport 0000:00:1d.0: Signaling PME with IRQ 122
pcieport 0000:00:1d.1: Signaling PME with IRQ 123
efifb: probing for efifb
efifb: framebuffer at 0xa0000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x8E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:01/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Invalid passive threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (32 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (32 C)
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
intel_pmc_core: initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x806ea, pf=0x80, revision=0x84
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (752310072, 0)->(760232011, -7921939)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 2:151:775
hctosys: unable to open rtc device (rtc0)
Freeing unused kernel memory: 1420K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2012K
Freeing unused kernel memory: 964K
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.17.0-rc3-navjaro xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.17.0-rc3-navjaro xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb: port power management may be unreliable
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x6 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xb1237000 port 0xb1237180 irq 126
ata3: SATA max UDMA/133 abar m2048@0xb1237000 port 0xb1237200 irq 126
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ata3: SATA link down (SStatus 4 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: SanDisk SD8SN8U-128G-1006, X4120006, max UDMA/133
ata2.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
usb 1-4: new high-speed USB device number 2 using xhci_hcd
scsi 1:0:0:0: Direct-Access ATA SanDisk SD8SN8U- 0006 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
PM: Image not found (code -22)
SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled
XFS (sda1): Mounting V5 Filesystem
XFS (sda1): Ending clean mount
random: fast init done
usb 1-4: New USB device found, idVendor=0bda, idProduct=58e6, bcdDevice= 0.10
usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-4: Product: HP Wide Vision FHD Camera
usb 1-4: Manufacturer: DGFST019I91J4Q
usb 1-4: SerialNumber: 200901010001
systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 1-5: new full-speed USB device number 3 using xhci_hcd
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Process Core Dump Socket.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Created slice User and Session Slice.
systemd-journald[243]: Received request to flush runtime journal from PID 1
input: HP Wireless hotkeys as /devices/virtual/input/input5
usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.03
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hp_accel: laptop model unknown, using default axes configuration
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
acpi INT33D6:00: intel-vbtn: created platform device
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
wmi_bus wmi_bus-PNP0C14:02: WQBJ data block query control method not found
ACPI: AC Adapter [ADP1] (on-line)
lis3lv02d: unknown sensor type 0x0
hp_accel: probe of HPQ6007:00 failed with error -22
hidraw: raw HID events driver (C) Jiri Kosina
input: Intel Virtual Button driver as /devices/pci0000:00/0000:00:1f.0/PNP0C09:01/INT33D6:01/input/input6
input: Intel Virtual Button driver as /devices/platform/INT33D6:00/input/input7
ACPI: Battery Slot [BAT0] (battery present)
input: PC Speaker as /devices/platform/pcspkr/input/input8
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
Linux agpgart interface v0.103
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
idma64 idma64.0: Found Intel integrated DMA 64-bit
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
i2c_hid i2c-ELAN0732:00: i2c-ELAN0732:00 supply vdd not found, using dummy regulator
cryptd: max_cpu_qlen set to 1000
i2c_hid i2c-ELAN0732:00: i2c_hid_get_input: incomplete report (64/65535)
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
Adding 16777536k swap on /dev/sda2. Priority:-2 extents:1 across:16777536k SSDscFS
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
iwlwifi 0000:02:00.0: loaded firmware version 29.610311.0 op_mode iwlmvm
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
media: Linux media interface: v0.10
input: ELAN0732:00 04F3:2521 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN0732:00/0018:04F3:2521.0001/input/input11
hid-generic 0018:04F3:2521.0001: input,hidraw0: I2C HID v1.00 Device [ELAN0732:00 04F3:2521] on i2c-ELAN0732:00
Linux video capture interface: v2.00
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
input: ELAN0732:00 04F3:2521 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN0732:00/0018:04F3:2521.0001/input/input12
input: ELAN0732:00 04F3:2521 Pen as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN0732:00/0018:04F3:2521.0001/input/input15
hid-multitouch 0018:04F3:2521.0001: input,hidraw0: I2C HID v1.00 Device [ELAN0732:00 04F3:2521] on i2c-ELAN0732:00
usbcore: registered new interface driver btusb
mousedev: PS/2 mouse device common for all mice
uvcvideo: Found UVC 1.00 device HP Wide Vision FHD Camera (0bda:58e6)
Bluetooth: hci0: read Intel version: 370810225019140f33
Bluetooth: hci0: Intel device is already patched. patch num: 33
uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
input: HP Wide Vision FHD Camera: HP W as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input19
uvcvideo: Found UVC 1.00 device HP Wide Vision FHD Camera (0bda:58e6)
uvcvideo: Unable to create debugfs 1-2 directory.
uvcvideo 1-4:1.2: Entity type for entity Extension 10 was not initialized!
uvcvideo 1-4:1.2: Entity type for entity Extension 12 was not initialized!
uvcvideo 1-4:1.2: Entity type for entity Processing 9 was not initialized!
uvcvideo 1-4:1.2: Entity type for entity Camera 11 was not initialized!
input: HP Wide Vision FHD Camera: HP I as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/input/input20
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
pcieport 0000:00:1d.1: AER: Corrected error received: id=00e9
pcieport 0000:00:1d.1: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e9(Receiver ID)
pcieport 0000:00:1d.1: device [8086:9d19] error status/mask=00000001/00002000
pcieport 0000:00:1d.1: [ 0] Receiver Error (First)
iwlwifi 0000:02:00.0: base HW address: 1c:4d:70:a1:8d:f8
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone8: failed to read out thermal zone (-61)
iwlwifi 0000:02:00.0 wlo1: renamed from wlan0
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4d5f01)
psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x1a, 0x0d.
psmouse serio1: elantech: Elan sample query result 04, 49, 86
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=2
checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
hid-generic 001F:8086:22D8.0002: hidraw1: HID v2.00 Device [hid-ishtp 8086:22D8] on
hid-generic 001F:8086:22D8.0003: hidraw2: HID v2.00 Device [hid-ishtp 8086:22D8] on
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
pcieport 0000:00:1d.1: AER: Corrected error received: id=00e9
pcieport 0000:00:1d.1: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e9(Receiver ID)
pcieport 0000:00:1d.1: device [8086:9d19] error status/mask=00000001/00002000
pcieport 0000:00:1d.1: [ 0] Receiver Error (First)
fbcon: inteldrmfb (fb0) is primary device
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC295: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
pcieport 0000:00:1d.1: AER: Corrected error received: id=00e9
pcieport 0000:00:1d.1: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e9(Receiver ID)
pcieport 0000:00:1d.1: device [8086:9d19] error status/mask=00000001/00002000
pcieport 0000:00:1d.1: [ 0] Receiver Error (First)
hp_wmi: query 0xd returned error 0x5
input: HP WMI hotkeys as /devices/virtual/input/input10
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
pcieport 0000:00:1d.1: AER: Corrected error received: id=00e9
pcieport 0000:00:1d.1: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e9(Receiver ID)
pcieport 0000:00:1d.1: device [8086:9d19] error status/mask=00000001/00002000
pcieport 0000:00:1d.1: [ 0] Receiver Error (First)
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
fuse init (API version 7.26)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ata2: hard resetting link
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with 70:8b:cd:ca:12:5c
wlo1: send auth to 70:8b:cd:ca:12:5c (try 1/3)
wlo1: authenticated
wlo1: associate with 70:8b:cd:ca:12:5c (try 1/3)
wlo1: RX AssocResp from 70:8b:cd:ca:12:5c (capab=0x1011 status=0 aid=2)
wlo1: AP has invalid WMM params (CWmin/max=15/1023 for ACI 0), using defaults
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
i2c_hid i2c-ELAN0732:00: i2c_hid_get_input: incomplete report (67/65535)
i2c_hid i2c-ELAN0732:00: i2c_hid_get_input: incomplete report (67/65535)
i2c_hid i2c-ELAN0732:00: i2c_hid_get_input: incomplete report (67/65535)
usb 1-3: new high-speed USB device number 4 using xhci_hcd
usb 1-3: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 3.18
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: Pixel
usb 1-3: Manufacturer: Google
usb 1-3: SerialNumber: FA6AE0312973
usb 1-3: can't set config #1, error -32
usb 1-3: USB disconnect, device number 4
usb 1-3: new high-speed USB device number 5 using xhci_hcd
usb 1-3: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 3.18
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: Pixel
usb 1-3: Manufacturer: Google
usb 1-3: SerialNumber: FA6AE0312973
i2c_hid i2c-ELAN0732:00: i2c_hid_get_input: incomplete report (67/65535)
i2c_hid i2c-ELAN0732:00: i2c_hid_get_input: incomplete report (67/65535)
i2c_hid i2c-ELAN0732:00: i2c_hid_get_input: incomplete report (67/65535)