dmesg - mytest
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-696.el6.x86_64 (mockbuild@c1bm.rdu2.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-18) (GCC) ) #1 SMP Tue Mar 21 19:29:05 UTC 2017
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf730000 (usable)
BIOS-e820: 00000000bf730000 - 00000000bf73e000 (ACPI data)
BIOS-e820: 00000000bf73e000 - 00000000bf7a0000 (ACPI NVS)
BIOS-e820: 00000000bf7a0000 - 00000000bf7b0000 (reserved)
BIOS-e820: 00000000bf7bc000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
SMBIOS version 2.6 @ 0xFB7D0
SMBIOS 2.6 present.
DMI: Dell SLIMFAST09 /0YG5J5, BIOS 1.71 09/17/2013
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x240000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 1GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 3064MB, range: 8MB, type UC
total RAM covered: 8184M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 8G num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 3064MB, range: 8MB, type UC
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 8GB, range: 1GB, type WB
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf730 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bf730000
0000000000 - 0080000000 page 1G
0080000000 - 00bf600000 page 2M
00bf600000 - 00bf730000 page 4k
kernel direct mapping tables up to bf730000 @ 8000-b000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000240000000
0100000000 - 0240000000 page 1G
kernel direct mapping tables up to 240000000 @ a000-b000
RAMDISK: 366d1000 - 37fef929
ACPI: Deleted _OSI(Windows 2012)
ACPI: Deleted _OSI(Windows 2013)
ACPI: RSDP 00000000000fa6f0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bf730100 00064 (v01 091713 XSDT2129 20130917 MSFT 00000097)
ACPI: FACP 00000000bf730290 000F4 (v04 091713 FACP2129 20130917 MSFT 00000097)
ACPI: DSDT 00000000bf730540 048F7 (v02 5442B 5442B171 00000171 INTL 20051117)
ACPI: FACS 00000000bf73e000 00040
ACPI: APIC 00000000bf730390 0011E (v02 091713 APIC2129 20130917 MSFT 00000097)
ACPI: SPCR 00000000bf7304b0 00050 (v01 091713 SPCR2129 20130917 MSFT 00000097)
ACPI: MCFG 00000000bf730500 0003C (v01 091713 OEMMCFG 20130917 MSFT 00000097)
ACPI: OEMB 00000000bf73e040 00082 (v01 091713 OEMB2129 20130917 MSFT 00000097)
ACPI: HPET 00000000bf73a540 00038 (v01 091713 OEMHPET 20130917 MSFT 00000097)
ACPI: DMAR 00000000bf73e0d0 000D0 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 00000000bf73ffb0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000240000000
Bootmem setup node 0 0000000000000000-0000000240000000
NODE_DATA [000000000000a000 - 000000000003dfff]
bootmap [000000000003e000 - 0000000000085fff] pages 48
(7 early reservations) ==> bootmem [0000000000 - 0240000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002045964] TEXT DATA BSS ==> [0001000000 - 0002045964]
#3 [00366d1000 - 0037fef929] RAMDISK ==> [00366d1000 - 0037fef929]
#4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
#5 [0002046000 - 00020464fb] BRK ==> [0002046000 - 00020464fb]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
found SMP MP-table at [ffff8800000ff780] ff780
Found 129MB of memory at 48MB for crashkernel auto
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 9216MB)
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00240000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009e
0: 0x00000100 -> 0x000bf730
0: 0x00100000 -> 0x00240000
On node 0 totalpages: 2094797
DMA zone: 56 pages used for memmap
DMA zone: 102 pages reserved
DMA zone: 3839 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765800 pages, LIFO batch:31
Normal zone: 17920 pages used for memmap
Normal zone: 1292800 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 24 CPUs, 16 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf730000 - 00000000bf73e000
PM: Registered nosave memory: 00000000bf73e000 - 00000000bf7a0000
PM: Registered nosave memory: 00000000bf7a0000 - 00000000bf7b0000
PM: Registered nosave memory: 00000000bf7b0000 - 00000000bf7bc000
PM: Registered nosave memory: 00000000bf7bc000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88002f600000 s96600 r8192 d22184 u131072
pcpu-alloc: s96600 r8192 d22184 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062439
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 8020460k/9437184k available (5467k kernel code, 1057996k absent, 358728k reserved, 6954k data, 1316k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1008
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2133.378 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.75 BogoMIPS (lpj=2133378)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21966 entries in 87 pages
dmar: Host address width 40
dmar: DRHD base: 0x000000fbffe000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020f6
dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff
dmar: RMRR base: 0x000000bf7ec000 end: 0x000000bf7fffff
dmar: ATSR flags: 0x0
APIC routing finalized to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz stepping 02
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
Brought up 8 CPUs
Total of 8 processors activated (34134.04 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at bf73e000 (401408 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
_OSC request data:1 1f
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb]
pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfec8a000-0xfec8afff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:13.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xfbef8000-0xfbefbfff 64bit]
pci 0000:00:16.1: reg 10: [mem 0xfbef4000-0xfbef7fff 64bit]
pci 0000:00:16.2: reg 10: [mem 0xfbef0000-0xfbef3fff 64bit]
pci 0000:00:16.3: reg 10: [mem 0xfbeec000-0xfbeeffff 64bit]
pci 0000:00:16.4: reg 10: [mem 0xfbee8000-0xfbeebfff 64bit]
pci 0000:00:16.5: reg 10: [mem 0xfbee4000-0xfbee7fff 64bit]
pci 0000:00:16.6: reg 10: [mem 0xfbee0000-0xfbee3fff 64bit]
pci 0000:00:16.7: reg 10: [mem 0xfbedc000-0xfbedffff 64bit]
pci 0000:00:1d.0: reg 20: [io 0xcc00-0xcc1f]
pci 0000:00:1d.1: reg 20: [io 0xc880-0xc89f]
pci 0000:00:1d.2: reg 20: [io 0xc800-0xc81f]
pci 0000:00:1d.7: reg 10: [mem 0xfbeda000-0xfbeda3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.2: reg 10: [io 0xbc00-0xbc07]
pci 0000:00:1f.2: reg 14: [io 0xc480-0xc483]
pci 0000:00:1f.2: reg 18: [io 0xc400-0xc407]
pci 0000:00:1f.2: reg 1c: [io 0xc080-0xc083]
pci 0000:00:1f.2: reg 20: [io 0xc000-0xc01f]
pci 0000:00:1f.2: reg 24: [mem 0xfbed8000-0xfbed87ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xfbed6000-0xfbed60ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:01:00.0: reg 10: [mem 0xfbde0000-0xfbdfffff]
pci 0000:01:00.0: reg 14: [mem 0xfbdc0000-0xfbddffff]
pci 0000:01:00.0: reg 18: [io 0xdc00-0xdc1f]
pci 0000:01:00.0: reg 1c: [mem 0xfbd9c000-0xfbd9ffff]
pci 0000:01:00.0: reg 30: [mem 0xfbda0000-0xfbdbffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: reg 10: [mem 0xfbd60000-0xfbd7ffff]
pci 0000:01:00.1: reg 14: [mem 0xfbd40000-0xfbd5ffff]
pci 0000:01:00.1: reg 18: [io 0xd880-0xd89f]
pci 0000:01:00.1: reg 1c: [mem 0xfbd1c000-0xfbd1ffff]
pci 0000:01:00.1: reg 30: [mem 0xfbd20000-0xfbd3ffff pref]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: PME# disabled
pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:04:04.0: reg 10: [mem 0xfb000000-0xfb7fffff]
pci 0000:04:04.0: reg 14: [mem 0xfafe0000-0xfaffffff]
pci 0000:04:04.0: reg 18: [io 0xec00-0xec7f]
pci 0000:04:04.0: supports D1 D2
pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:04.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfaf00000-0xfb7fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
vgaarb: device added: PCI:0000:04:04.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:04.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfbf00000-0xfbffffff]
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfec8a000-0xfec8afff]
pnp 00:01: [mem 0xfed10000-0xfed10fff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0010-0x001f]
pnp 00:06: [io 0x0022-0x003f]
pnp 00:06: [io 0x0044-0x005f]
pnp 00:06: [io 0x0062-0x0063]
pnp 00:06: [io 0x0065-0x006f]
pnp 00:06: [io 0x0072-0x007f]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0084-0x0086]
pnp 00:06: [io 0x0088]
pnp 00:06: [io 0x008c-0x008e]
pnp 00:06: [io 0x0090-0x009f]
pnp 00:06: [io 0x00a2-0x00bf]
pnp 00:06: [io 0x00e0-0x00ef]
pnp 00:06: [io 0x04d0-0x04d1]
pnp 00:06: [io 0x0800-0x087f]
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0500-0x057f]
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [mem 0xfed1c000-0xfed1ffff]
pnp 00:06: [mem 0xfed20000-0xfed3ffff]
pnp 00:06: [mem 0xfed40000-0xfed8ffff]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0ca2]
pnp 00:07: [io 0x0ca3]
pnp 00:07: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xe0000000-0xefffffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x000c0000-0x000cffff]
pnp 00:0b: [mem 0x000e0000-0x000fffff]
pnp 00:0b: [mem 0x00100000-0xbfffffff]
pnp 00:0b: [mem 0xfed90000-0xffffffff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfbf00000-0xfbffffff] could not be reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: [io 0x0500-0x057f] could not be reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved
pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: BAR 7: can't assign mem (size 0x20000)
pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: BAR 10: can't assign mem (size 0x20000)
pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: BAR 7: can't assign mem (size 0x20000)
pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: BAR 10: can't assign mem (size 0x20000)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfaf00000-0xfb7fffff]
Some PCI device resources are unassigned, try booting with pci=realloc
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03bb]
pci_bus 0000:00: resource 7 [io 0x03c0-0x03df]
pci_bus 0000:00: resource 8 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 12 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfaf00000-0xfb7fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03bb]
pci_bus 0000:04: resource 7 [io 0x03c0-0x03df]
pci_bus 0000:04: resource 8 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 10 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 11 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:04: resource 12 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:04:04.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 25722k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
futex hash table entries: 8192 (order: 7, 524288 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1515688139.687:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15715
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 1A01485A64DD991D
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000bf73e1a0 013CC (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: SSDT 00000000bf73f570 00678 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bf73fbf0 003BA (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbeda000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-696.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-696.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-696.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-696.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2018-01-11 16:29:01 UTC (1515688141)
Initalizing network drop monitor service
Freeing unused kernel memory: 1316k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 656k freed
Freeing unused kernel memory: 1548k freed
dracut: dracut-004-409.el6_8.2
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbed8000 port 0xfbed8100 irq 48
ata2: SATA max UDMA/133 abar m2048@0xfbed8000 port 0xfbed8180 irq 48
ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 48
ata4: SATA max UDMA/133 abar m2048@0xfbed8000 port 0xfbed8280 irq 48
ata5: SATA max UDMA/133 abar m2048@0xfbed8000 port 0xfbed8300 irq 48
ata6: SATA max UDMA/133 abar m2048@0xfbed8000 port 0xfbed8380 irq 48
usb 1-5: new high speed USB device number 2 using ehci_hcd
usb 1-5: New USB device found, idVendor=046b, idProduct=ff01
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Generic Hub
usb 1-5: Manufacturer: American Megatrends Inc.
usb 1-5: SerialNumber: serial
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 3 ports detected
Refined TSC clocksource calibration: 2133.408 MHz.
Switching to clocksource tsc
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-5.1: new low speed USB device number 3 using ehci_hcd
usb 1-5.1: New USB device found, idVendor=046b, idProduct=ff10
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5.1: Product: Virtual Keyboard and Mouse
usb 1-5.1: Manufacturer: American Megatrends Inc.
usb 1-5.1: SerialNumber: serial
usb 1-5.1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input3
generic-usb 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.7-5.1/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/1-5.1:1.1/input/input4
generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.7-5.1/input1
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-9: SanDisk SD8SBBU240G1122, Z3107000, max UDMA/133
ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SanDisk SD8SBBU2 7000 PQ: 0 ANSI: 5
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda3
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1515688144.347:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Mar 21 2017
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:16.0: enabling device (0000 -> 0002)
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.0: PCI INT A -> GSI 43 (level, low) -> IRQ 43
ioatdma 0000:00:16.0: setting latency timer to 64
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.0: irq 49 for MSI/MSI-X
ioatdma 0000:00:16.1: enabling device (0000 -> 0002)
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44
ioatdma 0000:00:16.1: setting latency timer to 64
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.1: irq 50 for MSI/MSI-X
ioatdma 0000:00:16.2: enabling device (0000 -> 0002)
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.2: PCI INT C -> GSI 45 (level, low) -> IRQ 45
ioatdma 0000:00:16.2: setting latency timer to 64
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.2: irq 51 for MSI/MSI-X
ioatdma 0000:00:16.3: enabling device (0000 -> 0002)
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.3: PCI INT D -> GSI 46 (level, low) -> IRQ 46
ioatdma 0000:00:16.3: setting latency timer to 64
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.3: irq 52 for MSI/MSI-X
ioatdma 0000:00:16.4: enabling device (0000 -> 0002)
ioatdma 0000:00:16.4: PCI INT A -> GSI 43 (level, low) -> IRQ 43
ioatdma 0000:00:16.4: setting latency timer to 64
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.4: irq 53 for MSI/MSI-X
ioatdma 0000:00:16.5: enabling device (0000 -> 0002)
ioatdma 0000:00:16.5: PCI INT B -> GSI 44 (level, low) -> IRQ 44
ioatdma 0000:00:16.5: setting latency timer to 64
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.5: irq 54 for MSI/MSI-X
ioatdma 0000:00:16.6: enabling device (0000 -> 0002)
ioatdma 0000:00:16.6: PCI INT C -> GSI 45 (level, low) -> IRQ 45
ioatdma 0000:00:16.6: setting latency timer to 64
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.6: irq 55 for MSI/MSI-X
ioatdma 0000:00:16.7: enabling device (0000 -> 0002)
ioatdma 0000:00:16.7: PCI INT D -> GSI 46 (level, low) -> IRQ 46
ioatdma 0000:00:16.7: setting latency timer to 64
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.7: irq 56 for MSI/MSI-X
sd 2:0:0:0: Attached scsi generic sg0 type 0
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
i801_smbus 0000:00:1f.3: SMBus using polling
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
igb 0000:01:00.0: setting latency timer to 64
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 57 for MSI/MSI-X
igb 0000:01:00.0: irq 57 for MSI/MSI-X
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 58 for MSI/MSI-X
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 59 for MSI/MSI-X
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 60 for MSI/MSI-X
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 61 for MSI/MSI-X
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 62 for MSI/MSI-X
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 63 for MSI/MSI-X
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 64 for MSI/MSI-X
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 65 for MSI/MSI-X
igb 0000:01:00.0: added PHC on eth0
igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:26:6c:ff:91:34
igb 0000:01:00.0: eth0: PBA No: Unknown
igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
igb 0000:01:00.1: setting latency timer to 64
alloc irq_desc for 66 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 66 for MSI/MSI-X
igb 0000:01:00.1: irq 66 for MSI/MSI-X
alloc irq_desc for 67 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 67 for MSI/MSI-X
alloc irq_desc for 68 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 68 for MSI/MSI-X
alloc irq_desc for 69 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 69 for MSI/MSI-X
alloc irq_desc for 70 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 70 for MSI/MSI-X
alloc irq_desc for 71 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 71 for MSI/MSI-X
alloc irq_desc for 72 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 72 for MSI/MSI-X
alloc irq_desc for 73 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 73 for MSI/MSI-X
alloc irq_desc for 74 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 74 for MSI/MSI-X
igb 0000:01:00.1: added PHC on eth1
igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:26:6c:ff:91:35
igb 0000:01:00.1: eth1: PBA No: Unknown
igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-2c-02
Microcode Update Driver: v2.00 , Peter Oruba
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:07: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
Adding 4095996k swap on /dev/sda2. Priority:-1 extents:1 across:4095996k SS
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb 0000:01:00.0: eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
type=1305 audit(1515659538.684:3): audit_pid=1507 old=0 auid=4294967295 ses=4294967295 res=1
INFO: task modprobe:1024 blocked for more than 120 seconds.
Not tainted 2.6.32-696.el6.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
modprobe D 0000000000000003 0 1024 1 0x00000000
ffff8802394b7cd8 0000000000000082 0000000000000000 ffff880235024800
ffff880234aeb000 ffff8802394b7d58 00000001495db29c ffffffffa01fcce2
ffff8802394b7c58 00000000fffb8042 ffff880235b325f8 ffff8802394b7fd8
Call Trace:
[] ? i_ipmi_request+0x262/0x620 [ipmi_msghandler]
[] get_guid+0x125/0x150 [ipmi_msghandler]
[] ? autoremove_wake_function+0x0/0x40
[] ? wake_up_process+0x15/0x20
[] ipmi_register_smi+0x41d/0x9d4 [ipmi_msghandler]
[] ? start_kcs_transaction+0x66/0x120 [ipmi_si]
[] try_smi_init+0x54c/0x9a0 [ipmi_si]
[] ? sysfs_add_file+0x11/0x20
[] init_ipmi_si+0x80c/0x9d6 [ipmi_si]
[] ? kasprintf+0x38/0x40
[] ? init_ipmi_si+0x0/0x9d6 [ipmi_si]
[] do_one_initcall+0xc0/0x280
[] sys_init_module+0xe1/0x250
[] system_call_fastpath+0x16/0x1b
INFO: task modprobe:1024 blocked for more than 120 seconds.
Not tainted 2.6.32-696.el6.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
modprobe D 0000000000000003 0 1024 1 0x00000000
ffff8802394b7cd8 0000000000000082 0000000000000000 ffff880235024800
ffff880234aeb000 ffff8802394b7d58 00000001495db29c ffffffffa01fcce2
ffff8802394b7c58 00000000fffb8042 ffff880235b325f8 ffff8802394b7fd8
Call Trace:
[] ? i_ipmi_request+0x262/0x620 [ipmi_msghandler]
[] get_guid+0x125/0x150 [ipmi_msghandler]
[] ? autoremove_wake_function+0x0/0x40
[] ? wake_up_process+0x15/0x20
[] ipmi_register_smi+0x41d/0x9d4 [ipmi_msghandler]
[] ? start_kcs_transaction+0x66/0x120 [ipmi_si]
[] try_smi_init+0x54c/0x9a0 [ipmi_si]
[] ? sysfs_add_file+0x11/0x20
[] init_ipmi_si+0x80c/0x9d6 [ipmi_si]
[] ? kasprintf+0x38/0x40
[] ? init_ipmi_si+0x0/0x9d6 [ipmi_si]
[] do_one_initcall+0xc0/0x280
[] sys_init_module+0xe1/0x250
[] system_call_fastpath+0x16/0x1b
INFO: task modprobe:1024 blocked for more than 120 seconds.
Not tainted 2.6.32-696.el6.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
modprobe D 0000000000000003 0 1024 1 0x00000000
ffff8802394b7cd8 0000000000000082 0000000000000000 ffff880235024800
ffff880234aeb000 ffff8802394b7d58 00000001495db29c ffffffffa01fcce2
ffff8802394b7c58 00000000fffb8042 ffff880235b325f8 ffff8802394b7fd8
Call Trace:
[] ? i_ipmi_request+0x262/0x620 [ipmi_msghandler]
[] get_guid+0x125/0x150 [ipmi_msghandler]
[] ? autoremove_wake_function+0x0/0x40
[] ? wake_up_process+0x15/0x20
[] ipmi_register_smi+0x41d/0x9d4 [ipmi_msghandler]
[] ? start_kcs_transaction+0x66/0x120 [ipmi_si]
[] try_smi_init+0x54c/0x9a0 [ipmi_si]
[] ? sysfs_add_file+0x11/0x20
[] init_ipmi_si+0x80c/0x9d6 [ipmi_si]
[] ? kasprintf+0x38/0x40
[] ? init_ipmi_si+0x0/0x9d6 [ipmi_si]
[] do_one_initcall+0xc0/0x280
[] sys_init_module+0xe1/0x250
[] system_call_fastpath+0x16/0x1b
INFO: task modprobe:1024 blocked for more than 120 seconds.
Not tainted 2.6.32-696.el6.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
modprobe D 0000000000000003 0 1024 1 0x00000000
ffff8802394b7cd8 0000000000000082 0000000000000000 ffff880235024800
ffff880234aeb000 ffff8802394b7d58 00000001495db29c ffffffffa01fcce2
ffff8802394b7c58 00000000fffb8042 ffff880235b325f8 ffff8802394b7fd8
Call Trace:
[] ? i_ipmi_request+0x262/0x620 [ipmi_msghandler]
[] get_guid+0x125/0x150 [ipmi_msghandler]
[] ? autoremove_wake_function+0x0/0x40
[] ? wake_up_process+0x15/0x20
[] ipmi_register_smi+0x41d/0x9d4 [ipmi_msghandler]
[] ? start_kcs_transaction+0x66/0x120 [ipmi_si]
[] try_smi_init+0x54c/0x9a0 [ipmi_si]
[] ? sysfs_add_file+0x11/0x20
[] init_ipmi_si+0x80c/0x9d6 [ipmi_si]
[] ? kasprintf+0x38/0x40
[] ? init_ipmi_si+0x0/0x9d6 [ipmi_si]
[] do_one_initcall+0xc0/0x280
[] sys_init_module+0xe1/0x250
[] system_call_fastpath+0x16/0x1b
INFO: task modprobe:1024 blocked for more than 120 seconds.
Not tainted 2.6.32-696.el6.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
modprobe D 0000000000000003 0 1024 1 0x00000000
ffff8802394b7cd8 0000000000000082 0000000000000000 ffff880235024800
ffff880234aeb000 ffff8802394b7d58 00000001495db29c ffffffffa01fcce2
ffff8802394b7c58 00000000fffb8042 ffff880235b325f8 ffff8802394b7fd8
Call Trace:
[] ? i_ipmi_request+0x262/0x620 [ipmi_msghandler]
[] get_guid+0x125/0x150 [ipmi_msghandler]
[] ? autoremove_wake_function+0x0/0x40
[] ? wake_up_process+0x15/0x20
[] ipmi_register_smi+0x41d/0x9d4 [ipmi_msghandler]
[] ? start_kcs_transaction+0x66/0x120 [ipmi_si]
[] try_smi_init+0x54c/0x9a0 [ipmi_si]
[] ? sysfs_add_file+0x11/0x20
[] init_ipmi_si+0x80c/0x9d6 [ipmi_si]
[] ? kasprintf+0x38/0x40
[] ? init_ipmi_si+0x0/0x9d6 [ipmi_si]
[] do_one_initcall+0xc0/0x280
[] sys_init_module+0xe1/0x250
[] system_call_fastpath+0x16/0x1b
INFO: task modprobe:1024 blocked for more than 120 seconds.
Not tainted 2.6.32-696.el6.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
modprobe D 0000000000000003 0 1024 1 0x00000000
ffff8802394b7cd8 0000000000000082 0000000000000000 ffff880235024800
ffff880234aeb000 ffff8802394b7d58 00000001495db29c ffffffffa01fcce2
ffff8802394b7c58 00000000fffb8042 ffff880235b325f8 ffff8802394b7fd8
Call Trace:
[] ? i_ipmi_request+0x262/0x620 [ipmi_msghandler]
[] get_guid+0x125/0x150 [ipmi_msghandler]
[] ? autoremove_wake_function+0x0/0x40
[] ? wake_up_process+0x15/0x20
[] ipmi_register_smi+0x41d/0x9d4 [ipmi_msghandler]
[] ? start_kcs_transaction+0x66/0x120 [ipmi_si]
[] try_smi_init+0x54c/0x9a0 [ipmi_si]
[] ? sysfs_add_file+0x11/0x20
[] init_ipmi_si+0x80c/0x9d6 [ipmi_si]
[] ? kasprintf+0x38/0x40
[] ? init_ipmi_si+0x0/0x9d6 [ipmi_si]
[] do_one_initcall+0xc0/0x280
[] sys_init_module+0xe1/0x250
[] system_call_fastpath+0x16/0x1b
INFO: task modprobe:1024 blocked for more than 120 seconds.
Not tainted 2.6.32-696.el6.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
modprobe D 0000000000000003 0 1024 1 0x00000000
ffff8802394b7cd8 0000000000000082 0000000000000000 ffff880235024800
ffff880234aeb000 ffff8802394b7d58 00000001495db29c ffffffffa01fcce2
ffff8802394b7c58 00000000fffb8042 ffff880235b325f8 ffff8802394b7fd8
Call Trace:
[] ? i_ipmi_request+0x262/0x620 [ipmi_msghandler]
[] get_guid+0x125/0x150 [ipmi_msghandler]
[] ? autoremove_wake_function+0x0/0x40
[] ? wake_up_process+0x15/0x20
[] ipmi_register_smi+0x41d/0x9d4 [ipmi_msghandler]
[] ? start_kcs_transaction+0x66/0x120 [ipmi_si]
[] try_smi_init+0x54c/0x9a0 [ipmi_si]
[] ? sysfs_add_file+0x11/0x20
[] init_ipmi_si+0x80c/0x9d6 [ipmi_si]
[] ? kasprintf+0x38/0x40
[] ? init_ipmi_si+0x0/0x9d6 [ipmi_si]
[] do_one_initcall+0xc0/0x280
[] sys_init_module+0xe1/0x250
[] system_call_fastpath+0x16/0x1b
INFO: task modprobe:1024 blocked for more than 120 seconds.
Not tainted 2.6.32-696.el6.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
modprobe D 0000000000000003 0 1024 1 0x00000000
ffff8802394b7cd8 0000000000000082 0000000000000000 ffff880235024800
ffff880234aeb000 ffff8802394b7d58 00000001495db29c ffffffffa01fcce2
ffff8802394b7c58 00000000fffb8042 ffff880235b325f8 ffff8802394b7fd8
Call Trace:
[] ? i_ipmi_request+0x262/0x620 [ipmi_msghandler]
[] get_guid+0x125/0x150 [ipmi_msghandler]
[] ? autoremove_wake_function+0x0/0x40
[] ? wake_up_process+0x15/0x20
[] ipmi_register_smi+0x41d/0x9d4 [ipmi_msghandler]
[] ? start_kcs_transaction+0x66/0x120 [ipmi_si]
[] try_smi_init+0x54c/0x9a0 [ipmi_si]
[] ? sysfs_add_file+0x11/0x20
[] init_ipmi_si+0x80c/0x9d6 [ipmi_si]
[] ? kasprintf+0x38/0x40
[] ? init_ipmi_si+0x0/0x9d6 [ipmi_si]
[] do_one_initcall+0xc0/0x280
[] sys_init_module+0xe1/0x250
[] system_call_fastpath+0x16/0x1b
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb 0000:01:00.0: eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ADDRCONF(NETDEV_UP): eth1: link is not ready
igb 0000:01:00.1: eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
INFO: task modprobe:1024 blocked for more than 120 seconds.
Not tainted 2.6.32-696.el6.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
modprobe D 0000000000000003 0 1024 1 0x00000000
ffff8802394b7cd8 0000000000000082 0000000000000000 ffff880235024800
ffff880234aeb000 ffff8802394b7d58 00000001495db29c ffffffffa01fcce2
ffff8802394b7c58 00000000fffb8042 ffff880235b325f8 ffff8802394b7fd8
Call Trace:
[] ? i_ipmi_request+0x262/0x620 [ipmi_msghandler]
[] get_guid+0x125/0x150 [ipmi_msghandler]
[] ? autoremove_wake_function+0x0/0x40
[] ? wake_up_process+0x15/0x20
[] ipmi_register_smi+0x41d/0x9d4 [ipmi_msghandler]
[] ? start_kcs_transaction+0x66/0x120 [ipmi_si]
[] try_smi_init+0x54c/0x9a0 [ipmi_si]
[] ? sysfs_add_file+0x11/0x20
[] init_ipmi_si+0x80c/0x9d6 [ipmi_si]
[] ? kasprintf+0x38/0x40
[] ? init_ipmi_si+0x0/0x9d6 [ipmi_si]
[] do_one_initcall+0xc0/0x280
[] sys_init_module+0xe1/0x250
[] system_call_fastpath+0x16/0x1b
INFO: task modprobe:1024 blocked for more than 120 seconds.
Not tainted 2.6.32-696.el6.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
modprobe D 0000000000000003 0 1024 1 0x00000000
ffff8802394b7cd8 0000000000000082 0000000000000000 ffff880235024800
ffff880234aeb000 ffff8802394b7d58 00000001495db29c ffffffffa01fcce2
ffff8802394b7c58 00000000fffb8042 ffff880235b325f8 ffff8802394b7fd8
Call Trace:
[] ? i_ipmi_request+0x262/0x620 [ipmi_msghandler]
[] get_guid+0x125/0x150 [ipmi_msghandler]
[] ? autoremove_wake_function+0x0/0x40
[] ? wake_up_process+0x15/0x20
[] ipmi_register_smi+0x41d/0x9d4 [ipmi_msghandler]
[] ? start_kcs_transaction+0x66/0x120 [ipmi_si]
[] try_smi_init+0x54c/0x9a0 [ipmi_si]
[] ? sysfs_add_file+0x11/0x20
[] init_ipmi_si+0x80c/0x9d6 [ipmi_si]
[] ? kasprintf+0x38/0x40
[] ? init_ipmi_si+0x0/0x9d6 [ipmi_si]
[] do_one_initcall+0xc0/0x280
[] sys_init_module+0xe1/0x250
[] system_call_fastpath+0x16/0x1b
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb 0000:01:00.0: eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ADDRCONF(NETDEV_UP): eth1: link is not ready
igb 0000:01:00.1: eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
igb 0000:01:00.0: eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb 0000:01:00.0: eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ADDRCONF(NETDEV_UP): eth1: link is not ready
igb 0000:01:00.1: eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
ip_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
usb 1-5: USB disconnect, device number 2
usb 1-5.1: USB disconnect, device number 3
usb 1-5: new high speed USB device number 4 using ehci_hcd
usb 1-5: New USB device found, idVendor=046b, idProduct=ff01
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Generic Hub
usb 1-5: Manufacturer: American Megatrends Inc.
usb 1-5: SerialNumber: serial
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 3 ports detected
usb 1-5.1: new low speed USB device number 5 using ehci_hcd
usb 1-5.1: New USB device found, idVendor=046b, idProduct=ff10
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5.1: Product: Virtual Keyboard and Mouse
usb 1-5.1: Manufacturer: American Megatrends Inc.
usb 1-5.1: SerialNumber: serial
usb 1-5.1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input5
generic-usb 0003:046B:FF10.0003: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.7-5.1/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/1-5.1:1.1/input/input6
generic-usb 0003:046B:FF10.0004: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.7-5.1/input1
ipmi_si 00:07: Found new BMC (man_id: 0x005059, prod_id: 0x0034, dev_id: 0x25)
ipmi_si 00:07: IPMI kcs interface initialized
NOHZ: local_softirq_pending 100