dmesg - 1
microcode: microcode updated early to revision 0xba, date = 2017-04-09
random: get_random_bytes called from start_kernel+0x42/0x504 with crng_init=0
Linux version 4.13.0-26-generic (buildd@lgw01-amd64-031) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #29~16.04.2-Ubuntu SMP Tue Jan 9 22:00:44 UTC 2018 (Ubuntu 4.13.0-26.29~16.04.2-generic 4.13.13)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000092650fff] usable
BIOS-e820: [mem 0x0000000092651000-0x0000000092651fff] ACPI NVS
BIOS-e820: [mem 0x0000000092652000-0x000000009269bfff] reserved
BIOS-e820: [mem 0x000000009269c000-0x0000000096f6dfff] usable
BIOS-e820: [mem 0x0000000096f6e000-0x00000000972acfff] reserved
BIOS-e820: [mem 0x00000000972ad000-0x0000000097445fff] usable
BIOS-e820: [mem 0x0000000097446000-0x0000000097ac8fff] ACPI NVS
BIOS-e820: [mem 0x0000000097ac9000-0x0000000097ffefff] reserved
BIOS-e820: [mem 0x0000000097fff000-0x0000000097ffffff] usable
BIOS-e820: [mem 0x0000000098000000-0x00000000980fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000864ffffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 3.0.0 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./C236M WS, BIOS P1.50 06/17/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x865000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 009C000000 mask 7FFC000000 uncachable
3 base 009A000000 mask 7FFE000000 uncachable
4 base 0099000000 mask 7FFF000000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x98000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdaf0-0x000fdaff] mapped at [ffff8fea000fdaf0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8fea00096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x7e4d2c000, 0x7e4d2cfff] PGTABLE
BRK [0x7e4d2d000, 0x7e4d2dfff] PGTABLE
BRK [0x7e4d2e000, 0x7e4d2efff] PGTABLE
BRK [0x7e4d2f000, 0x7e4d2ffff] PGTABLE
BRK [0x7e4d30000, 0x7e4d30fff] PGTABLE
BRK [0x7e4d31000, 0x7e4d31fff] PGTABLE
BRK [0x7e4d32000, 0x7e4d32fff] PGTABLE
BRK [0x7e4d33000, 0x7e4d33fff] PGTABLE
BRK [0x7e4d34000, 0x7e4d34fff] PGTABLE
BRK [0x7e4d35000, 0x7e4d35fff] PGTABLE
BRK [0x7e4d36000, 0x7e4d36fff] PGTABLE
RAMDISK: [mem 0x31ea6000-0x34f4afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x000000009754E0A8 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x0000000097570860 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000009754E218 022641 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x0000000097AC7F80 000040
ACPI: APIC 0x0000000097570970 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x0000000097570A30 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x0000000097570A78 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x0000000097570B18 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x0000000097570B58 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
ACPI: SSDT 0x0000000097570B90 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x0000000097570F00 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: DBGP 0x0000000097570F98 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x0000000097570FD0 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000097571028 000618 (v02 INTEL xh_rvp08 00000000 INTL 20120913)
ACPI: AAFT 0x0000000097571640 000061 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: SSDT 0x00000000975716A8 0053FD (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x0000000097576AA8 000042 (v01 00000000 00000000)
ACPI: SSDT 0x0000000097576AF0 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: DMAR 0x0000000097577948 000070 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: SSDT 0x00000000975779B8 000169 (v01 Intel IntelRMT 00001000 INTL 20120913)
ACPI: ASF! 0x0000000097577B28 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: EINJ 0x0000000097577BD0 000130 (v01 AMI AMI.EINJ 00000000 AMI. 00000000)
ACPI: ERST 0x0000000097577D00 000230 (v01 AMIER AMI.ERST 00000000 AMI. 00000000)
ACPI: BERT 0x0000000097577F30 000030 (v01 AMI AMI.BERT 00000000 AMI. 00000000)
ACPI: HEST 0x0000000097577F60 0000A8 (v01 AMI AMI.HEST 00000000 AMI. 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000864ffffff]
NODE_DATA(0) allocated [mem 0x864fd5000-0x864ffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000864ffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x0000000092650fff]
node 0: [mem 0x000000009269c000-0x0000000096f6dfff]
node 0: [mem 0x00000000972ad000-0x0000000097445fff]
node 0: [mem 0x0000000097fff000-0x0000000097ffffff]
node 0: [mem 0x0000000100000000-0x0000000864ffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000864ffffff]
On node 0 totalpages: 8372312
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 9603 pages used for memmap
DMA32 zone: 614589 pages, LIFO batch:31
Normal zone: 121152 pages used for memmap
Normal zone: 7753728 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x92651000-0x92651fff]
PM: Registered nosave memory: [mem 0x92652000-0x9269bfff]
PM: Registered nosave memory: [mem 0x96f6e000-0x972acfff]
PM: Registered nosave memory: [mem 0x97446000-0x97ac8fff]
PM: Registered nosave memory: [mem 0x97ac9000-0x97ffefff]
PM: Registered nosave memory: [mem 0x98000000-0x980fffff]
PM: Registered nosave memory: [mem 0x98100000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x98100000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 46 pages/cpu @ffff8ff264c00000 s149784 r8192 d30440 u262144
pcpu-alloc: s149784 r8192 d30440 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8241472
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32821528K/33489248K available (12300K kernel code, 2480K rwdata, 4004K rodata, 2372K init, 2368K bss, 667720K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 37814 entries in 148 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 3400.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6816.00 BogoMIPS (lpj=13632000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170531/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170531/psobject-252)
ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20170531/tbxfload-228)
ACPI Error: 1 table load failures, 5 successful (20170531/tbxfload-246)
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x00000097024000 end: 0x00000097043fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1230 v5 @ 3.40GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54528.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x92651000-0x92651fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x97446000-0x97ac8fff] (6828032 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 21:43:44, date: 03/17/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 24 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FF2404D7800 0006E4 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FF240699000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FF240B61000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FF24075C000 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x99000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:1918] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf330000-0xdf33ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf34f000-0xdf34ffff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf34e000-0xdf34efff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:16.3: [8086:a13d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xf060-0xf067]
pci 0000:00:16.3: reg 0x14: [mem 0xdf34d000-0xdf34dfff]
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf348000-0xdf349fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf34c000-0xdf34c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf34b000-0xdf34b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf344000-0xdf347fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf340000-0xdf343fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf320000-0xdf32ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf34a000-0xdf34a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf300000-0xdf31ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [10de:1287] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xdf200000-0xdf27ffff]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:03:00.0: reg 0x1c: [mem 0xdf280000-0xdf283fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 03]
pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.7: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:04:00.0: [144d:a804] type 00 class 0x010802
pci 0000:04:00.0: reg 0x10: [mem 0xdf100000-0xdf103fff 64bit]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [mem 0xdf100000-0xdf1fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
e820: reserve RAM buffer [mem 0x92651000-0x93ffffff]
e820: reserve RAM buffer [mem 0x96f6e000-0x97ffffff]
e820: reserve RAM buffer [mem 0x97446000-0x97ffffff]
e820: reserve RAM buffer [mem 0x865000000-0x867ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0280-0x028f] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x02a0-0x02af] has been reserved
system 00:00: [io 0x02b0-0x02bf] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xff00-0xfffe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.7: PCI bridge to [bus 03]
pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.7: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x99000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 49812K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x92f6e000-0x96f6e000] (64MB) mapped at [ffff8fea92f6e000-ffff8fea96f6dfff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd3cd494, max_idle_ns: 440795223879 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1521323023.721:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: AER enabled with IRQ 122
pcieport 0000:00:1c.7: AER enabled with IRQ 123
pcieport 0000:00:1d.0: AER enabled with IRQ 124
pcieport 0000:00:01.0: Signaling PME with IRQ 121
pcieport 0000:00:1c.0: Signaling PME with IRQ 122
pcieport 0000:00:1c.7: Signaling PME with IRQ 123
pcieport 0000:00:1d.0: Signaling PME with IRQ 124
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: using zlib compression
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit.
00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
0000:00:16.3: ttyS4 at I/O 0xf060 (irq = 19, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-26-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-26-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x506e3, pf=0x2, revision=0xba
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (780020566, 0)->(783811439, -3790873)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: b1931af2efdddab2cc28005a48cb6f00161c7d17'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 10:172:753
tty ttyS4: hash matches
rtc_cmos 00:04: setting system clock to 2018-03-17 21:43:44 UTC (1521323024)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2372K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2024K
Freeing unused kernel memory: 92K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
hidraw: raw HID events driver (C) Jiri Kosina
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
PTP clock support registered
nvme nvme0: pci function 0000:04:00.0
dca service started, version 1.12.1
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b100 irq 126
ata2: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b180 irq 126
ata3: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b200 irq 126
ata4: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b280 irq 126
ata5: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b300 irq 126
ata6: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b380 irq 126
ata7: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b400 irq 126
ata8: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b480 irq 126
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:c0:c6:b2
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
usb 1-11: new high-speed USB device number 2 using xhci_hcd
nvme0n1: p1 p2 p3 p4
pps pps0: new PPS source ptp1
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) d0:50:99:c0:c6:b1
igb 0000:03:00.0: eth0: PBA No: 001300-000
igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:03:00.0 enp3s0: renamed from eth0
usb 1-11: New USB device found, idVendor=2109, idProduct=2812
usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-11: Product: USB2.0 Hub
usb 1-11: Manufacturer: VIA Labs, Inc.
hub 1-11:1.0: USB hub found
hub 1-11:1.0: 4 ports detected
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata6.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-10: Crucial_CT525MX300SSD1, M0CR031, max UDMA/133
ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata4.00: configured for UDMA/133
ata7.00: ATA-8: Hitachi HUS724030ALE641, MJ8OA5F0, max UDMA/133
ata7.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata8.00: ATA-8: Hitachi HUS724030ALE641, MJ8OA5F0, max UDMA/133
ata8.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata7.00: configured for UDMA/133
ata8.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Crucial_CT525MX3 R031 PQ: 0 ANSI: 5
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5
ata1.00: Enabling discard_zeroes_data
sda: sda1
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] supports TCG Opal
sd 0:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 3:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-13: new high-speed USB device number 3 using xhci_hcd
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sdc] 4096-byte physical blocks
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
scsi 4:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb9
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:0:0: [sdd] 4096-byte physical blocks
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg3 type 0
scsi 5:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5
sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sde] 4096-byte physical blocks
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: Attached scsi generic sg4 type 0
scsi 6:0:0:0: Direct-Access ATA Hitachi HUS72403 A5F0 PQ: 0 ANSI: 5
sdc: sdc1 sdc9
sd 3:0:0:0: [sdc] Attached SCSI disk
sdd: sdd1 sdd9
sd 4:0:0:0: [sdd] Attached SCSI disk
sd 6:0:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 6:0:0:0: [sdf] 4096-byte physical blocks
sd 6:0:0:0: [sdf] Write Protect is off
sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: Attached scsi generic sg5 type 0
usb 1-13: New USB device found, idVendor=0451, idProduct=8142
usb 1-13: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-13: SerialNumber: 4C0600694A5F
scsi 7:0:0:0: Direct-Access ATA Hitachi HUS72403 A5F0 PQ: 0 ANSI: 5
hub 1-13:1.0: USB hub found
hub 1-13:1.0: 4 ports detected
sde: sde1 sde9
sd 5:0:0:0: [sde] Attached SCSI disk
sdf: sdf1 sdf9
sd 6:0:0:0: [sdf] Attached SCSI disk
sd 7:0:0:0: [sdg] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 7:0:0:0: [sdg] 4096-byte physical blocks
sd 7:0:0:0: [sdg] Write Protect is off
sd 7:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: Attached scsi generic sg6 type 0
sdg: sdg1 sdg9
sd 7:0:0:0: [sdg] Attached SCSI disk
clocksource: Switched to clocksource tsc
random: crng init done
usb 1-13.1: new low-speed USB device number 4 using xhci_hcd
usb 1-13.1: New USB device found, idVendor=04d9, idProduct=1605
usb 1-13.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-13.1: Product: USB Keyboard
usb 1-13.1: Manufacturer:
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.0/0003:04D9:1605.0001/input/input3
usb 1-13.4: new high-speed USB device number 5 using xhci_hcd
hid-generic 0003:04D9:1605.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-13.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:04D9:1605.0002/input/input4
hid-generic 0003:04D9:1605.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-13.1/input1
usb 1-13.4: New USB device found, idVendor=0451, idProduct=8142
usb 1-13.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-13.4: SerialNumber: 4C0600894A5F
hub 1-13.4:1.0: USB hub found
hub 1-13.4:1.0: 4 ports detected
usb 1-13.4.1: new full-speed USB device number 6 using xhci_hcd
usb 1-13.4.1: New USB device found, idVendor=413c, idProduct=a503
usb 1-13.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-13.4.1: Product: Dell AC511 USB SoundBar
usb 1-13.4.1: Manufacturer: Dell
input: Dell Dell AC511 USB SoundBar as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.4/1-13.4.1/1-13.4.1:1.3/0003:413C:A503.0003/input/input5
hid-generic 0003:413C:A503.0003: input,hidraw2: USB HID v1.00 Device [Dell Dell AC511 USB SoundBar] on usb-0000:00:14.0-13.4.1/input3
usb 1-13.4.2: new full-speed USB device number 7 using xhci_hcd
usb 1-13.4.2: New USB device found, idVendor=062a, idProduct=4102
usb 1-13.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-13.4.2: Product: 2.4G Wireless Mouse
usb 1-13.4.2: Manufacturer: MOSART Semi.
input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.4/1-13.4.2/1-13.4.2:1.0/0003:062A:4102.0004/input/input6
hid-generic 0003:062A:4102.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:14.0-13.4.2/input0
raid6: sse2x1 gen() 10346 MB/s
raid6: sse2x1 xor() 6631 MB/s
raid6: sse2x2 gen() 12853 MB/s
raid6: sse2x2 xor() 8953 MB/s
raid6: sse2x4 gen() 14604 MB/s
raid6: sse2x4 xor() 10011 MB/s
raid6: avx2x1 gen() 24623 MB/s
raid6: avx2x1 xor() 18775 MB/s
raid6: avx2x2 gen() 28460 MB/s
raid6: avx2x2 xor() 20469 MB/s
raid6: avx2x4 gen() 31675 MB/s
raid6: avx2x4 xor() 23554 MB/s
raid6: using algorithm avx2x4 gen() 31675 MB/s
raid6: .... xor() 23554 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd-journald[423]: Received request to flush runtime journal from PID 1
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED)
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia-nvlink: Nvlink Core is being initialized, major device number 239
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.111 Tue Dec 19 23:51:45 PST 2017 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.111 Tue Dec 19 22:56:18 PST 2017
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
usbcore: registered new interface driver snd-usb-audio
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 238
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
SPL: Loaded module v0.6.5.11-1ubuntu1
ZFS: Loaded module v0.6.5.11-1ubuntu3, ZFS pool version 5000, ZFS filesystem version 5
SPL: using hostid 0x00000000
audit: type=1400 audit(1521323033.394:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=3358 comm="apparmor_parser"
audit: type=1400 audit(1521323033.394:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=3356 comm="apparmor_parser"
audit: type=1400 audit(1521323033.395:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=3354 comm="apparmor_parser"
audit: type=1400 audit(1521323033.395:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd" pid=3359 comm="apparmor_parser"
audit: type=1400 audit(1521323033.395:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=3352 comm="apparmor_parser"
audit: type=1400 audit(1521323033.395:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=3352 comm="apparmor_parser"
audit: type=1400 audit(1521323033.395:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=3352 comm="apparmor_parser"
audit: type=1400 audit(1521323033.395:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=3352 comm="apparmor_parser"
audit: type=1400 audit(1521323033.395:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3357 comm="apparmor_parser"
audit: type=1400 audit(1521323033.395:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=3357 comm="apparmor_parser"
new mount options do not match the existing superblock, will be ignored
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
nvidia-modeset: Allocated GPU:0 (GPU-befc925c-5e42-19ca-5381-344cad18ceef) @ PCI:0000:01:00.0
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
igb 0000:03:00.0 enp3s0: igb: enp3s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)
/dev/vmmon[4853]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[4853]: Using tsc_khz as TSC frequency: 3408000
/dev/vmmon[4853]: Module vmmon: initialized
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=54)
Initialized host personality
NET: Registered protocol family 40
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
/dev/vmnet: open called by PID 5013 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-enp0s31f6: up
bridge-enp0s31f6: attached
bridge-enp0s31f6: disabling the bridge on dev down
bridge-enp0s31f6: down
bridge-enp0s31f6: detached
/dev/vmnet: open called by PID 5013 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-enp3s0: up
bridge-enp3s0: attached
bridge-enp3s0: disabling the bridge on dev down
bridge-enp3s0: down
bridge-enp3s0: detached
/dev/vmnet: open called by PID 5013 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-enp0s31f6: up
bridge-enp0s31f6: attached
/dev/vmnet: open called by PID 5121 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 5125 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 5144 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-5: sent link down event.
userif-5: sent link up event.
/dev/vmnet: open called by PID 5145 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 5154 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened