dmesg - test
random: get_random_bytes called from start_kernel+0x42/0x4ef with crng_init=0
Linux version 4.13.0-36-generic (buildd@lcy01-amd64-017) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3.2)) #40-Ubuntu SMP Fri Feb 16 20:07:48 UTC 2018 (Ubuntu 4.13.0-36.40-generic 4.13.13)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000390e1fff] usable
BIOS-e820: [mem 0x00000000390e2000-0x00000000390e2fff] ACPI NVS
BIOS-e820: [mem 0x00000000390e3000-0x00000000390e3fff] reserved
BIOS-e820: [mem 0x00000000390e4000-0x000000003e13afff] usable
BIOS-e820: [mem 0x000000003e13b000-0x000000003eaeffff] reserved
BIOS-e820: [mem 0x000000003eaf0000-0x000000003ebaefff] usable
BIOS-e820: [mem 0x000000003ebaf000-0x000000003ef6bfff] ACPI NVS
BIOS-e820: [mem 0x000000003ef6c000-0x000000003fb8efff] reserved
BIOS-e820: [mem 0x000000003fb8f000-0x000000003fbfefff] type 20
BIOS-e820: [mem 0x000000003fbff000-0x000000003fbfffff] usable
BIOS-e820: [mem 0x000000003fc00000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000010beffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.50 by American Megatrends
efi: ACPI 2.0=0x3ebaf000 ACPI=0x3ebaf000 SMBIOS=0x3fb02000 SMBIOS 3.0=0x3fb01000 ESRT=0x3d06b3d8
random: fast init done
SMBIOS 3.0.0 present.
DMI: TUXEDO P7xxDM2(-G) /P7xxDM2(-G) , BIOS 1.06.10 07/07/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x10bf000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 0040000000 mask 7FC0000000 uncachable
2 base 2000000000 mask 7000000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x3fc00 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000003d06b3d8 to 0x000000003d06b410.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9bebc0097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0xbad52c000, 0xbad52cfff] PGTABLE
BRK [0xbad52d000, 0xbad52dfff] PGTABLE
BRK [0xbad52e000, 0xbad52efff] PGTABLE
BRK [0xbad52f000, 0xbad52ffff] PGTABLE
BRK [0xbad530000, 0xbad530fff] PGTABLE
BRK [0xbad531000, 0xbad531fff] PGTABLE
BRK [0xbad532000, 0xbad532fff] PGTABLE
BRK [0xbad533000, 0xbad533fff] PGTABLE
BRK [0xbad534000, 0xbad534fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x30a45000-0x34519fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000003EBAF000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000003EBAF0A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000003EBCC710 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000003EBAF208 01D501 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000003EF53C40 000040
ACPI: APIC 0x000000003EBCC828 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000003EBCC8E8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000003EBCC930 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000003EBCC970 000377 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: FIDT 0x000000003EBCCCE8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000003EBCCD88 0028F8 (v01 NvdRef NvdTabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000003EBCF680 0005C8 (v02 Intel PerfTune 00001000 INTL 20160422)
ACPI: SSDT 0x000000003EBCFC48 001802 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: HPET 0x000000003EBD1450 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: UEFI 0x000000003EBD1488 000042 (v01 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x000000003EBD14D0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: WSMT 0x000000003EBD23B0 000028 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000003EBD23D8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x000000003EBD53E0 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000003EBD5418 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: BGRT 0x000000003EBD5470 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x000000003EBD54A8 000070 (v01 INTEL KBL 00000001 INTL 00000001)
ACPI: TPM2 0x000000003EBD5518 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
ACPI: ASF! 0x000000003EBD5550 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000010beffffff]
NODE_DATA(0) allocated [mem 0x10befd5000-0x10beffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000010beffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000390e1fff]
node 0: [mem 0x00000000390e4000-0x000000003e13afff]
node 0: [mem 0x000000003eaf0000-0x000000003ebaefff]
node 0: [mem 0x000000003fbff000-0x000000003fbfffff]
node 0: [mem 0x0000000100000000-0x00000010beffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000010beffffff]
On node 0 totalpages: 16765333
DMA zone: 64 pages used for memmap
DMA zone: 23 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 3912 pages used for memmap
DMA32 zone: 250361 pages, LIFO batch:31
Normal zone: 257984 pages used for memmap
Normal zone: 16510976 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: Registered nosave memory: [mem 0x390e2000-0x390e2fff]
PM: Registered nosave memory: [mem 0x390e3000-0x390e3fff]
PM: Registered nosave memory: [mem 0x3e13b000-0x3eaeffff]
PM: Registered nosave memory: [mem 0x3ebaf000-0x3ef6bfff]
PM: Registered nosave memory: [mem 0x3ef6c000-0x3fb8efff]
PM: Registered nosave memory: [mem 0x3fb8f000-0x3fbfefff]
PM: Registered nosave memory: [mem 0x3fc00000-0x3fffffff]
PM: Registered nosave memory: [mem 0x40000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x40000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 45 pages/cpu @ffff9bfc7ec00000 s146520 r8192 d29608 u262144
pcpu-alloc: s146520 r8192 d29608 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 16503350
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 65785400K/67061332K available (12300K kernel code, 2482K rwdata, 4000K rodata, 2372K init, 2368K bss, 1275932K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 37826 entries in 148 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 2900.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5808.00 BogoMIPS (lpj=11616000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 7 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
FEATURE SPEC_CTRL Not Present
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 mitigation: Mitigation: Full generic retpoline
Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
Spectre V2 mitigation: Filling RSB on context switch
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000003e544000 end: 0x0000003e563fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-7700T CPU @ 2.90GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (46464.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x390e2000-0x390e2fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x3ebaf000-0x3ef6bfff] (3919872 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 8:49:19, date: 03/02/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 31 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9BFC37455000 000672 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9BFC37731800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9BFC37456000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9BFC3773E400 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0x2000000000-0x2fffffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0x2ffff26000-0x2ffff26fff 64bit]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x2ffff10000-0x2ffff1ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x2ffff25000-0x2ffff25fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdc504000-0xdc505fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdc507000-0xdc5070ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdc506000-0xdc5067ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400
pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdc500000-0xdc503fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0x2ffff20000-0x2ffff23fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0x2ffff00000-0x2ffff0ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0x2ffff24000-0x2ffff240ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1c60] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xdb000000-0xdbffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdc000000-0xdc07ffff pref]
pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdc080000-0xdc083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-6c]
pci 0000:00:1c.0: bridge window [mem 0xac000000-0xda0fffff]
pci 0000:00:1c.0: bridge window [mem 0x2fb0000000-0x2ff9ffffff 64bit pref]
pci 0000:6d:00.0: [1969:e0a1] type 00 class 0x020000
pci 0000:6d:00.0: reg 0x10: [mem 0xdc400000-0xdc43ffff 64bit]
pci 0000:6d:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:6d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 6d]
pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.6: bridge window [mem 0xdc400000-0xdc4fffff]
pci 0000:6e:00.0: [10ec:5250] type 00 class 0x080501
pci 0000:6e:00.0: reg 0x10: [mem 0xdc301000-0xdc301fff]
pci 0000:6e:00.0: reg 0x14: [mem 0xdc300000-0xdc300fff]
pci 0000:6e:00.0: supports D1 D2
pci 0000:6e:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 6e]
pci 0000:00:1c.7: bridge window [mem 0xdc300000-0xdc3fffff]
pci 0000:6f:00.0: [144d:a804] type 00 class 0x010802
pci 0000:6f:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit]
pci 0000:00:1d.0: PCI bridge to [bus 6f]
pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
pci 0000:70:00.0: [8086:24fd] type 00 class 0x028000
pci 0000:70:00.0: reg 0x10: [mem 0xdc100000-0xdc101fff 64bit]
pci 0000:70:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.4: PCI bridge to [bus 70]
pci 0000:00:1d.4: bridge window [mem 0xdc100000-0xdc1fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x390e2000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3e13b000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3ebaf000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3fc00000-0x3fffffff]
e820: reserve RAM buffer [mem 0x10bf000000-0x10bfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: [io 0x3322-0x3323] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN1220 PNP0f13 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xff00-0xfffe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-6c] add_size 1000
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-6c]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xac000000-0xda0fffff]
pci 0000:00:1c.0: bridge window [mem 0x2fb0000000-0x2ff9ffffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 6d]
pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.6: bridge window [mem 0xdc400000-0xdc4fffff]
pci 0000:00:1c.7: PCI bridge to [bus 6e]
pci 0000:00:1c.7: bridge window [mem 0xdc300000-0xdc3fffff]
pci 0000:00:1d.0: PCI bridge to [bus 6f]
pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
pci 0000:00:1d.4: PCI bridge to [bus 70]
pci 0000:00:1d.4: bridge window [mem 0xdc100000-0xdc1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0x40000000-0xdfffffff window]
pci_bus 0000:00: resource 21 [mem 0x2000000000-0x2fffffffff window]
pci_bus 0000:00: resource 22 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xac000000-0xda0fffff]
pci_bus 0000:02: resource 2 [mem 0x2fb0000000-0x2ff9ffffff 64bit pref]
pci_bus 0000:6d: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:6d: resource 1 [mem 0xdc400000-0xdc4fffff]
pci_bus 0000:6e: resource 1 [mem 0xdc300000-0xdc3fffff]
pci_bus 0000:6f: resource 1 [mem 0xdc200000-0xdc2fffff]
pci_bus 0000:70: resource 1 [mem 0xdc100000-0xdc1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 60244K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x2ca45000-0x30a45000] (64MB) mapped at [ffff9bebeca45000-ffff9bebf0a44fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc05e54fc, max_idle_ns: 440795291716 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1519980559.984:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
efifb: probing for efifb
efifb: framebuffer at 0x90000000, using 8640k, total 8640k
efifb: mode is 1920x1080x32, linelength=8192, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (50 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-36-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-36-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
clocksource: Switched to clocksource tsc
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906e9, pf=0x2, revision=0x5e
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (2307160278, 0)->(2314395960, -7235682)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: ed17cb0b980ab73b98c1ee5cf598999494007d7d'
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI db list
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI MokListRT
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI dbx list
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
usb 1-2: new full-speed USB device number 2 using xhci_hcd
usb 1-2: New USB device found, idVendor=06cb, idProduct=0078
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-2: SerialNumber: 7e2798007587
usb 1-10: new high-speed USB device number 3 using xhci_hcd
usb 1-10: New USB device found, idVendor=04f2, idProduct=b5a7
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10: Product: Chicony USB 2.0 Camera
usb 1-10: Manufacturer: SunplusIT Inc
usb 1-11: new full-speed USB device number 4 using xhci_hcd
usb 1-11: New USB device found, idVendor=8087, idProduct=0a2b
usb 1-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
evm: HMAC attrs: 0x1
Magic number: 10:763:825
rtc_cmos 00:02: setting system clock to 2018-03-02 08:49:23 UTC (1519980563)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2372K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2024K
Freeing unused kernel memory: 96K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
hidraw: raw HID events driver (C) Jiri Kosina
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
ipmi message handler version 39.2
ipmi device interface
ahci 0000:00:17.0: version 3.0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:6e:00.0: SDHCI controller found [10ec:5250] (rev 1)
sdhci-pci 0000:6e:00.0: enabling device (0000 -> 0002)
nvme nvme0: pci function 0000:6f:00.0
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0xc impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
nvidia: module verification failed: signature and/or required key missing - tainting kernel
mmc0: Unknown controller version (3). You may experience problems.
acpi device:05: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input9
mmc0: SDHCI controller on PCI [0000:6e:00.0] using ADMA
nvidia-nvlink: Nvlink Core is being initialized, major device number 243
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.25 Wed Jan 24 20:02:43 PST 2018 (using threaded interrupts)
alx 0000:6d:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [80:fa:5b:3b:95:f0]
alx 0000:6d:00.0 enp109s0: renamed from eth0
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.25 Wed Jan 24 19:29:37 PST 2018
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xdc506000 port 0xdc506200 irq 122
ata4: SATA max UDMA/133 abar m2048@0xdc506000 port 0xdc506280 irq 122
nvme0n1: p1 p2 p3 p4
ata4: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
raid6: sse2x1 gen() 13040 MB/s
raid6: sse2x1 xor() 9447 MB/s
raid6: sse2x2 gen() 16125 MB/s
raid6: sse2x2 xor() 10867 MB/s
raid6: sse2x4 gen() 18705 MB/s
raid6: sse2x4 xor() 11427 MB/s
raid6: avx2x1 gen() 25898 MB/s
raid6: avx2x1 xor() 18088 MB/s
raid6: avx2x2 gen() 31626 MB/s
raid6: avx2x2 xor() 19706 MB/s
raid6: avx2x4 gen() 36372 MB/s
raid6: avx2x4 xor() 21390 MB/s
raid6: using algorithm avx2x4 gen() 36372 MB/s
raid6: .... xor() 21390 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
psmouse serio2: synaptics: queried max coordinates: x [..5656], y [..4728]
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
psmouse serio2: synaptics: queried min coordinates: x [1284..], y [1128..]
psmouse serio2: synaptics: Your touchpad (PNP: SYN1220 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Audit Socket.
EXT4-fs (nvme0n1p3): re-mounted. Opts: (null)
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x26800/0x0, board id: 3261, fw id: 2393254
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
systemd-journald[371]: Received request to flush runtime journal from PID 1
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 241
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:70:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:70:00.0: Direct firmware load for iwlwifi-8265-33.ucode failed with error -2
iwlwifi 0000:70:00.0: Direct firmware load for iwlwifi-8265-32.ucode failed with error -2
iwlwifi 0000:70:00.0: loaded firmware version 31.560484.0 op_mode iwlmvm
iwlwifi 0000:70:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
iwlwifi 0000:70:00.0: base HW address: 00:28:f8:05:bd:3d
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone1: failed to read out thermal zone (-5)
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b5a7)
uvcvideo 1-10:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-10:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-10:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-10:1.0: Entity type for entity Camera 1 was not initialized!
input: Chicony USB 2.0 Camera: Chicony as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usbcore: registered new interface driver btusb
Bluetooth: hci0: Firmware revision 0.1 build 173 week 45 2017
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
iwlwifi 0000:70:00.0 wlp112s0: renamed from wlan0
Adding 8388604k swap on /dev/nvme0n1p2. Priority:-1 extents:1 across:8388604k SSFS
EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
audit: type=1400 audit(1519980565.980:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=2508 comm="apparmor_parser"
audit: type=1400 audit(1519980565.981:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=2505 comm="apparmor_parser"
audit: type=1400 audit(1519980565.981:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2505 comm="apparmor_parser"
audit: type=1400 audit(1519980565.981:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=2505 comm="apparmor_parser"
audit: type=1400 audit(1519980565.981:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=2506 comm="apparmor_parser"
audit: type=1400 audit(1519980565.982:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2498 comm="apparmor_parser"
audit: type=1400 audit(1519980565.982:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2498 comm="apparmor_parser"
audit: type=1400 audit(1519980565.982:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2498 comm="apparmor_parser"
audit: type=1400 audit(1519980565.982:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2498 comm="apparmor_parser"
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2903984749 Hz
vboxdrv: Successfully loaded version 5.2.2 (interface 0x00290000)
IPv6: ADDRCONF(NETDEV_UP): enp109s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp109s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp112s0: link is not ready
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
IPv6: ADDRCONF(NETDEV_UP): wlp112s0: link is not ready
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
alx 0000:6d:00.0 enp109s0: NIC Up: 1 Gbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): enp109s0: link becomes ready
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
IPv6: ADDRCONF(NETDEV_UP): wlp112s0: link is not ready
nvidia-modeset: Allocated GPU:0 (GPU-ac262dbc-bf2c-f557-f0b6-31f1dee947d7) @ PCI:0000:01:00.0
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
show_signal_msg: 11 callbacks suppressed
Chrome_~dThread[5233]: segfault at 0 ip 00007f47c68d8abd sp 00007f47c4bb1b10 error 6 in libxul.so[7f47c5a77000+5863000]
Chrome_~dThread[10070]: segfault at 0 ip 00007f3e521d8abd sp 00007f3e504b1b10 error 6 in libxul.so[7f3e51377000+5863000]
Chrome_~dThread[11088]: segfault at 0 ip 00007f3801bd8abd sp 00007f37ffeb1b10 error 6
Chrome_~dThread[11191]: segfault at 0 ip 00007f47221d8abd sp 00007f47204b1b10 error 6
in libxul.so[7f3800d77000+5863000]
in libxul.so[7f4721377000+5863000]
Chrome_~dThread[13639]: segfault at 0 ip 00007f6ae9ed8abd sp 00007f6ae81b1b10 error 6 in libxul.so[7f6ae9077000+5863000]
Chrome_~dThread[13774]: segfault at 0 ip 00007f52d72d8abd sp 00007f52d55b1b10 error 6 in libxul.so[7f52d6477000+5863000]
perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
mmc0: error -84 whilst initialising SD card
mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00000003
mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000000
mmc0: sdhci: Argument: 0x80ff1fff | Trn mode: 0x00000013
mmc0: sdhci: Present: 0x01ff00f0 | Host ctl: 0x00000012
mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa07
mmc0: sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps: 0x1168c899 | Caps_1: 0x1000a07f
mmc0: sdhci: Cmd: 0x0000063a | Max curr: 0x00008880
mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0xe3ffff06
mmc0: sdhci: Resp[2]: 0x4828d01f | Resp[3]: 0xc1800002
mmc0: sdhci: Host ctl2: 0x00000008
mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34000208
mmc0: sdhci: ============================================
mmc0: new high speed SDXC card at address 59b4
mmcblk0: mmc0:59b4 SDU1 59.1 GiB
mmc0: Timeout waiting for hardware interrupt.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000003
mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000
mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x0000003b
mmc0: sdhci: Present: 0x01ff00f3 | Host ctl: 0x00000017
mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000207
mmc0: sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps: 0x1168c899 | Caps_1: 0x1000a07f
mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x00008880
mmc0: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x00007f06
mmc0: sdhci: Resp[2]: 0xff28c000 | Resp[3]: 0xffffffff
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34000200
mmc0: sdhci: ============================================
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmc0: tried to reset card, got error -84
print_req_error: I/O error, dev mmcblk0, sector 0
Buffer I/O error on dev mmcblk0, logical block 0, async page read
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
print_req_error: I/O error, dev mmcblk0, sector 0
Buffer I/O error on dev mmcblk0, logical block 0, async page read
mmc0: Timeout waiting for hardware interrupt.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000003
mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000
mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x0000003b
mmc0: sdhci: Present: 0x01ef00f3 | Host ctl: 0x00000015
mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000207
mmc0: sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps: 0x1168c899 | Caps_1: 0x1000a07f
mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x00008880
mmc0: sdhci: Resp[0]: 0x00000600 | Resp[1]: 0x00007f0a
mmc0: sdhci: Resp[2]: 0xff53566d | Resp[3]: 0xffffffff
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34000200
mmc0: sdhci: ============================================
mmc0: Got command interrupt 0x000a0001 even though no command operation was in progress.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000003
mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000033
mmc0: sdhci: Present: 0x01ff00f0 | Host ctl: 0x00000014
mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000207
mmc0: sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps: 0x1168c899 | Caps_1: 0x1000a07f
mmc0: sdhci: Cmd: 0x00000c1a | Max curr: 0x00008880
mmc0: sdhci: Resp[0]: 0x00000600 | Resp[1]: 0x00007f08
mmc0: sdhci: Resp[2]: 0xffd30000 | Resp[3]: 0xffffffff
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34000200
mmc0: sdhci: ============================================
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
print_req_error: I/O error, dev mmcblk0, sector 0
Buffer I/O error on dev mmcblk0, logical block 0, async page read
ldm_validate_partition_table(): Disk read failed.
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
print_req_error: I/O error, dev mmcblk0, sector 0
Buffer I/O error on dev mmcblk0, logical block 0, async page read
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
print_req_error: I/O error, dev mmcblk0, sector 0
Buffer I/O error on dev mmcblk0, logical block 0, async page read
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
print_req_error: I/O error, dev mmcblk0, sector 0
Buffer I/O error on dev mmcblk0, logical block 0, async page read
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
print_req_error: I/O error, dev mmcblk0, sector 0
Buffer I/O error on dev mmcblk0, logical block 0, async page read
Dev mmcblk0: unable to read RDB block 0
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
print_req_error: I/O error, dev mmcblk0, sector 0
Buffer I/O error on dev mmcblk0, logical block 0, async page read
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
print_req_error: I/O error, dev mmcblk0, sector 0
Buffer I/O error on dev mmcblk0, logical block 0, async page read
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
print_req_error: I/O error, dev mmcblk0, sector 24
Buffer I/O error on dev mmcblk0, logical block 3, async page read
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
print_req_error: I/O error, dev mmcblk0, sector 0
Buffer I/O error on dev mmcblk0, logical block 0, async page read
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
print_req_error: I/O error, dev mmcblk0, sector 0
Buffer I/O error on dev mmcblk0, logical block 0, async page read
mmcblk0: unable to read partition table
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
ldm_validate_partition_table(): Disk read failed.
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
Dev mmcblk0: unable to read RDB block 0
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -110 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, aborting
mmcblk0: unable to read partition table
mmc0: Timeout waiting for hardware interrupt.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000003
mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000
mmc0: sdhci: Argument: 0x0763f780 | Trn mode: 0x0000003b
mmc0: sdhci: Present: 0x01ff00f3 | Host ctl: 0x00000015
mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000207
mmc0: sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps: 0x1168c899 | Caps_1: 0x1000a07f
mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x00008880
mmc0: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00007f0a
mmc0: sdhci: Resp[2]: 0xff53566d | Resp[3]: 0xffffffff
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34000200
mmc0: sdhci: ============================================
mmc0: Got command interrupt 0x000a0001 even though no command operation was in progress.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000003
mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000033
mmc0: sdhci: Present: 0x01ff00f0 | Host ctl: 0x00000014
mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000207
mmc0: sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps: 0x1168c899 | Caps_1: 0x1000a07f
mmc0: sdhci: Cmd: 0x00000c1a | Max curr: 0x00008880
mmc0: sdhci: Resp[0]: 0x00000600 | Resp[1]: 0x00007f08
mmc0: sdhci: Resp[2]: 0x00530000 | Resp[3]: 0x80000000
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34000200
mmc0: sdhci: ============================================
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -110 sending status command, aborting
print_req_error: 25 callbacks suppressed
print_req_error: I/O error, dev mmcblk0, sector 123991936
mmc0: Timeout waiting for hardware interrupt.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000003
mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
mmc0: sdhci: Argument: 0x00000080 | Trn mode: 0x0000003b
mmc0: sdhci: Present: 0x01ff00f3 | Host ctl: 0x00000015
mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000207
mmc0: sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps: 0x1168c899 | Caps_1: 0x1000a07f
mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x00008880
mmc0: sdhci: Resp[0]: 0xffffffff | Resp[1]: 0xffffffff
mmc0: sdhci: Resp[2]: 0xff01ffff | Resp[3]: 0xffffffff
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34000200
mmc0: sdhci: ============================================
mmc0: Got command interrupt 0x000a0001 even though no command operation was in progress.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000003
mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000033
mmc0: sdhci: Present: 0x01ff00f0 | Host ctl: 0x00000014
mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000207
mmc0: sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps: 0x1168c899 | Caps_1: 0x1000a07f
mmc0: sdhci: Cmd: 0x00000c1a | Max curr: 0x00008880
mmc0: sdhci: Resp[0]: 0x00000700 | Resp[1]: 0x00007f08
mmc0: sdhci: Resp[2]: 0x00530000 | Resp[3]: 0x80000001
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34000200
mmc0: sdhci: ============================================
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -110 sending status command, retrying
mmcblk0: error -110 sending status command, aborting
print_req_error: I/O error, dev mmcblk0, sector 128
mmc0: Timeout waiting for hardware interrupt.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000003
mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
mmc0: sdhci: Argument: 0x0763f780 | Trn mode: 0x0000003b
mmc0: sdhci: Present: 0x01ff00f3 | Host ctl: 0x00000015
mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000207
mmc0: sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps: 0x1168c899 | Caps_1: 0x1000a07f
mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x00008880
mmc0: sdhci: Resp[0]: 0xffffffff | Resp[1]: 0xffffffff
mmc0: sdhci: Resp[2]: 0xff01ffff | Resp[3]: 0xffffffff
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34000200
mmc0: sdhci: ============================================
mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000003
mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000033
mmc0: sdhci: Present: 0x01ef00f0 | Host ctl: 0x00000014
mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000207
mmc0: sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps: 0x1168c899 | Caps_1: 0x1000a07f
mmc0: sdhci: Cmd: 0x00000c1a | Max curr: 0x00008880
mmc0: sdhci: Resp[0]: 0xffffffff | Resp[1]: 0xffffffff
mmc0: sdhci: Resp[2]: 0x0001ffff | Resp[3]: 0x014c0000
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34000200
mmc0: sdhci: ============================================
mmcblk0: error -110 sending status command, retrying
mmcblk0: error -110 sending status command, retrying
mmcblk0: error -110 sending status command, aborting
print_req_error: I/O error, dev mmcblk0, sector 123991936
buffer_io_error: 17 callbacks suppressed
Buffer I/O error on dev mmcblk0, logical block 15498992, async page read
mmc0: Timeout waiting for hardware interrupt.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000003
mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
mmc0: sdhci: Argument: 0x00000080 | Trn mode: 0x0000003b
mmc0: sdhci: Present: 0x01ff00f3 | Host ctl: 0x00000015
mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000207
mmc0: sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps: 0x1168c899 | Caps_1: 0x1000a07f
mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x00008880
mmc0: sdhci: Resp[0]: 0xffffffff | Resp[1]: 0xffffffff
mmc0: sdhci: Resp[2]: 0xff01ffff | Resp[3]: 0xffffffff
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34000200
mmc0: sdhci: ============================================
mmc0: Got command interrupt 0x00000001 even though no command operation was in progress.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000003
mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000033
mmc0: sdhci: Present: 0x01ff00f0 | Host ctl: 0x00000014
mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000207
mmc0: sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps: 0x1168c899 | Caps_1: 0x1000a07f
mmc0: sdhci: Cmd: 0x00000c1a | Max curr: 0x00008880
mmc0: sdhci: Resp[0]: 0x80c00b00 | Resp[1]: 0x00003f0c
mmc0: sdhci: Resp[2]: 0xffe98000 | Resp[3]: 0xffffffff
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34000200
mmc0: sdhci: ============================================
mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x900
mmcblk0: error -110 transferring data, sector 128, nr 8, cmd response 0x0, card status 0x0
mmcblk0: retrying using single block read
mmcblk0: p1
mmc0: card 59b4 removed
perf: interrupt took too long (3136 > 3132), lowering kernel.perf_event_max_sample_rate to 63750