dmesg - valley_i3-6100T
Linux version 4.15.3-1-ARCH (builduser@bpiotrowski) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Mon Feb 12 23:01:17 UTC 2018
Command line: initrd=\initramfs-linux.img root=/dev/sda2 quiet rw
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b54e7fff] usable
BIOS-e820: [mem 0x00000000b54e8000-0x00000000b54e8fff] ACPI NVS
BIOS-e820: [mem 0x00000000b54e9000-0x00000000b54e9fff] reserved
BIOS-e820: [mem 0x00000000b54ea000-0x00000000be132fff] usable
BIOS-e820: [mem 0x00000000be133000-0x00000000be47bfff] reserved
BIOS-e820: [mem 0x00000000be47c000-0x00000000be5e8fff] usable
BIOS-e820: [mem 0x00000000be5e9000-0x00000000bec9afff] ACPI NVS
BIOS-e820: [mem 0x00000000bec9b000-0x00000000bf7fefff] reserved
BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xb2490018-0xb24ae457] usable ==> usable
e820: update [mem 0xb2490018-0xb24ae457] usable ==> usable
e820: update [mem 0xb247f018-0xb248fe57] usable ==> usable
e820: update [mem 0xb247f018-0xb248fe57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000b247f017] usable
reserve setup_data: [mem 0x00000000b247f018-0x00000000b248fe57] usable
reserve setup_data: [mem 0x00000000b248fe58-0x00000000b2490017] usable
reserve setup_data: [mem 0x00000000b2490018-0x00000000b24ae457] usable
reserve setup_data: [mem 0x00000000b24ae458-0x00000000b54e7fff] usable
reserve setup_data: [mem 0x00000000b54e8000-0x00000000b54e8fff] ACPI NVS
reserve setup_data: [mem 0x00000000b54e9000-0x00000000b54e9fff] reserved
reserve setup_data: [mem 0x00000000b54ea000-0x00000000be132fff] usable
reserve setup_data: [mem 0x00000000be133000-0x00000000be47bfff] reserved
reserve setup_data: [mem 0x00000000be47c000-0x00000000be5e8fff] usable
reserve setup_data: [mem 0x00000000be5e9000-0x00000000bec9afff] ACPI NVS
reserve setup_data: [mem 0x00000000bec9b000-0x00000000bf7fefff] reserved
reserve setup_data: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
reserve setup_data: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000043effffff] usable
efi: EFI v2.50 by American Megatrends
efi: ACPI 2.0=0xbe8e9000 ACPI=0xbe8e9000 SMBIOS=0xbf6cd000 SMBIOS 3.0=0xbf6cc000 MPS=0xfca10 ESRT=0xbce09d18
random: fast init done
SMBIOS 3.0.0 present.
DMI: Gigabyte Technology Co., Ltd. Z270X-UD3/Z270X-UD3-CF, BIOS F6 04/24/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ (ptrval)]
esrt: Reserving ESRT space from 0x00000000bce09d18 to 0x00000000bce09d50.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 95000 size 24576
Using GB pages for direct mapping
BRK [0x39c637000, 0x39c637fff] PGTABLE
BRK [0x39c638000, 0x39c638fff] PGTABLE
BRK [0x39c639000, 0x39c639fff] PGTABLE
BRK [0x39c63a000, 0x39c63afff] PGTABLE
BRK [0x39c63b000, 0x39c63bfff] PGTABLE
BRK [0x39c63c000, 0x39c63cfff] PGTABLE
BRK [0x39c63d000, 0x39c63dfff] PGTABLE
BRK [0x39c63e000, 0x39c63efff] PGTABLE
BRK [0x39c63f000, 0x39c63ffff] PGTABLE
BRK [0x39c640000, 0x39c640fff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x7f919000-0x7fffefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BE8E9000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BE8E90A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BE9120F0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BE8E9208 028EE8 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x00000000BEC9AC40 000040
ACPI: APIC 0x00000000BE912208 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BE912290 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BE9122D8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x00000000BE912318 0003BC (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: FIDT 0x00000000BE9126D8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000BE912778 003159 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x00000000BE9158D8 00255F (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x00000000BE917E38 000038 (v01 INTEL SKL 00000001 MSFT 0000005F)
ACPI: SSDT 0x00000000BE917E70 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x00000000BE918C58 002AD7 (v02 INTEL xh_rvp10 00000000 INTL 20160422)
ACPI: UEFI 0x00000000BE91B730 000042 (v01 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x00000000BE91B778 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x00000000BE91C658 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: WSMT 0x00000000BE91C6F0 000028 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000BE91C718 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x00000000BE91C9B8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x00000000BE91F9C0 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x00000000BE91F9F8 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: BGRT 0x00000000BE91FA50 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x00000000BE91FA88 000070 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043effffff]
NODE_DATA(0) allocated [mem 0x43effc000-0x43effefff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000b54e7fff]
node 0: [mem 0x00000000b54ea000-0x00000000be132fff]
node 0: [mem 0x00000000be47c000-0x00000000be5e8fff]
node 0: [mem 0x00000000bf7ff000-0x00000000bf7fffff]
node 0: [mem 0x0000000100000000-0x000000043effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
On node 0 totalpages: 4182588
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12107 pages used for memmap
DMA32 zone: 774815 pages, LIFO batch:31
Normal zone: 53184 pages used for memmap
Normal zone: 3403776 pages, LIFO batch:31
Reserved but unavailable: 98 pages
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
[Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb2 (or later)
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0xb247f000-0xb247ffff]
PM: Registered nosave memory: [mem 0xb248f000-0xb248ffff]
PM: Registered nosave memory: [mem 0xb2490000-0xb2490fff]
PM: Registered nosave memory: [mem 0xb24ae000-0xb24aefff]
PM: Registered nosave memory: [mem 0xb54e8000-0xb54e8fff]
PM: Registered nosave memory: [mem 0xb54e9000-0xb54e9fff]
PM: Registered nosave memory: [mem 0xbe133000-0xbe47bfff]
PM: Registered nosave memory: [mem 0xbe5e9000-0xbec9afff]
PM: Registered nosave memory: [mem 0xbec9b000-0xbf7fefff]
PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xc0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 45 pages/cpu @ (ptrval) s147456 r8192 d28672 u524288
pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 4117207
Policy zone: Normal
Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 quiet rw
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16206952K/16730352K available (10252K kernel code, 1241K rwdata, 3220K rodata, 1432K init, 636K bss, 523400K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 31396 entries in 123 pages
Preemptible hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
RCU priority boosting: priority 1 delay 500 ms.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
Offload RCU callbacks from CPUs: .
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 9 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x000000be3f6000 end: 0x000000be415fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Detected 3200.000 MHz processor
tsc: Detected 3192.000 MHz TSC
Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.00 BogoMIPS (lpj=3192000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 8 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Filling RSB on context switch
Freeing SMP alternatives memory: 24K
smpboot: CPU0: Intel(R) Core(TM) i3-6100T CPU @ 3.20GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (25536.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xb54e8000-0xb54e8fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbe5e9000-0xbec9afff] (7020544 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 6:08:59, date: 02/14/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 36 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF897C6C1CE000 0006D5 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF897C6C381C00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF897C6C1C9000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF897C6BC75A00 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xeff4e000-0xeff4efff 64bit]
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xeff30000-0xeff3ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xeff4d000-0xeff4dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xeff48000-0xeff49fff]
pci 0000:00:17.0: reg 0x14: [mem 0xeff4c000-0xeff4c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xeff4b000-0xeff4b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.2: [8086:a2e9] type 01 class 0x060400
pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.3: [8086:a2ea] type 01 class 0x060400
pci 0000:00:1b.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400
pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:a296] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a2c5] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xeff44000-0xeff47fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xeff40000-0xeff43fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xeff20000-0xeff2ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xeff4a000-0xeff4a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xeff00000-0xeff1ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [1002:6939] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xefe00000-0xefe3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xefe40000-0xefe5ffff pref]
pci 0000:01:00.0: BAR 0: assigned to efifb
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.1: [1002:aad8] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xefe60000-0xefe63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xefe00000-0xefefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.2: PCI bridge to [bus 03]
pci 0000:00:1b.3: PCI bridge to [bus 04]
pci 0000:00:1b.4: PCI bridge to [bus 05]
acpiphp: Slot [1-1] registered
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xefd00000-0xefd07fff 64bit]
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 07]
pci 0000:00:1c.4: bridge window [mem 0xefd00000-0xefdfffff]
pci 0000:00:1c.6: PCI bridge to [bus 08]
pci 0000:09:00.0: [8086:f1a5] type 00 class 0x010802
pci 0000:09:00.0: reg 0x10: [mem 0xefc00000-0xefc03fff 64bit]
pci 0000:00:1d.0: PCI bridge to [bus 09]
pci 0000:00:1d.0: bridge window [mem 0xefc00000-0xefcfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xb247f018-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb2490018-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb54e8000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xbe133000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe5e9000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: [io 0x0a40-0x0a4f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x1800-0x18fe] has been reserved
system 00:03: [io 0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0800-0x087f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xeffe0000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0xff00-0xfffe] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xefe00000-0xefefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.2: PCI bridge to [bus 03]
pci 0000:00:1b.3: PCI bridge to [bus 04]
pci 0000:00:1b.4: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.4: PCI bridge to [bus 07]
pci 0000:00:1c.4: bridge window [mem 0xefd00000-0xefdfffff]
pci 0000:00:1c.6: PCI bridge to [bus 08]
pci 0000:00:1d.0: PCI bridge to [bus 09]
pci 0000:00:1d.0: bridge window [mem 0xefc00000-0xefcfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xefffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xefe00000-0xefefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xefd00000-0xefdfffff]
pci_bus 0000:09: resource 1 [mem 0xefc00000-0xefcfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 7064K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xae47f000-0xb247f000] (64MB) mapped at [00000000dbe858a8-00000000bb5c627b]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02c4a121d, max_idle_ns: 440795236083 ns
Scanning for low memory corruption every 60 seconds
simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x300000 bytes, mapped to 0x0000000010e0db72
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
Console: switching to colour frame buffer device 128x48
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=44 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
nvme nvme0: pci function 0000:09:00.0
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x506e3, pf=0x2, revision=0xa6
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (373564800, 0)->(465682486, -92117686)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 6:724:114
hctosys: unable to open rtc device (rtc0)
Freeing unused kernel memory: 1432K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 876K
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xeff4b000 port 0xeff4b100 irq 122
ata2: SATA max UDMA/133 abar m2048@0xeff4b000 port 0xeff4b180 irq 122
ata3: SATA max UDMA/133 abar m2048@0xeff4b000 port 0xeff4b200 irq 122
ata4: SATA max UDMA/133 abar m2048@0xeff4b000 port 0xeff4b280 irq 122
ata5: SATA max UDMA/133 abar m2048@0xeff4b000 port 0xeff4b300 irq 122
ata6: SATA max UDMA/133 abar m2048@0xeff4b000 port 0xeff4b380 irq 122
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.3-1-ARCH xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.3-1-ARCH xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
nvme0n1: p1
xhci_hcd 0000:07:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.15.3-1-ARCH xhci-hcd
usb usb3: SerialNumber: 0000:07:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:07:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.15.3-1-ARCH xhci-hcd
usb usb4: SerialNumber: 0000:07:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
raid6: sse2x1 gen() 11464 MB/s
raid6: sse2x1 xor() 8351 MB/s
raid6: sse2x2 gen() 14003 MB/s
raid6: sse2x2 xor() 9539 MB/s
raid6: sse2x4 gen() 14847 MB/s
raid6: sse2x4 xor() 10089 MB/s
raid6: avx2x1 gen() 22828 MB/s
raid6: avx2x1 xor() 16066 MB/s
raid6: avx2x2 gen() 28097 MB/s
raid6: avx2x2 xor() 17306 MB/s
raid6: avx2x4 gen() 31308 MB/s
raid6: avx2x4 xor() 19578 MB/s
raid6: using algorithm avx2x4 gen() 31308 MB/s
raid6: .... xor() 19578 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device fsid b988d809-9bbd-44c3-953b-f30c9a75bdfd devid 2 transid 335761 /dev/nvme0n1p1
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: NCQ Send/Recv Log not supported
ata6.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
ata6.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: NCQ Send/Recv Log not supported
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
sd 5:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 5:0:0:0: [sda] supports TCG Opal
sd 5:0:0:0: [sda] Attached SCSI disk
usb 1-3: new full-speed USB device number 2 using xhci_hcd
BTRFS: device fsid b988d809-9bbd-44c3-953b-f30c9a75bdfd devid 1 transid 335761 /dev/sda2
BTRFS info (device sda2): disk space caching is enabled
BTRFS info (device sda2): has skinny extents
usb 1-3: New USB device found, idVendor=046d, idProduct=c07e
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: Gaming Mouse G402
usb 1-3: Manufacturer: Logitech
usb 1-3: SerialNumber: 6D8D30A55455
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Gaming Mouse G402 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C07E.0001/input/input3
hid-generic 0003:046D:C07E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G402] on usb-0000:00:14.0-3/input0
input: Logitech Gaming Mouse G402 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C07E.0002/input/input4
BTRFS info (device sda2): enabling ssd optimizations
hid-generic 0003:046D:C07E.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G402] on usb-0000:00:14.0-3/input1
usb 1-7: new high-speed USB device number 3 using xhci_hcd
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
usb 1-7: New USB device found, idVendor=0d8c, idProduct=0004
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: Sanskrit 6th
usb 1-7: Manufacturer: SMSL Audio
systemd[1]: Set hostname to .
input: SMSL Audio Sanskrit 6th as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.2/0003:0D8C:0004.0003/input/input5
clocksource: Switched to clocksource tsc
hid-generic 0003:0D8C:0004.0003: input,hidraw2: USB HID v1.00 Device [SMSL Audio Sanskrit 6th] on usb-0000:00:14.0-7/input2
systemd[1]: Created slice User and Session Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-getty.slice.
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 4 processor cores
ata6.00: exception Emask 0x10 SAct 0x3c00000 SErr 0x400101 action 0x6 frozen
ata6.00: irq_stat 0x08000000, interface fatal error
ata6: SError: { RecovData UnrecovData Handshk }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/20:b0:00:f8:5f/00:00:00:00:00/40 tag 22 ncq dma 16384 out
res 40/00:b8:80:f8:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/20:b8:80:f8:5f/00:00:00:00:00/40 tag 23 ncq dma 16384 out
res 40/00:b8:80:f8:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/40:c0:e0:f9:5f/00:00:00:00:00/40 tag 24 ncq dma 32768 out
res 40/00:b8:80:f8:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/80:c8:c0:fa:5f/01:00:00:00:00/40 tag 25 ncq dma 196608 out
res 40/00:b8:80:f8:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6: hard resetting link
vboxdrv: TSC mode is Invariant, tentative frequency 3191989526 Hz
vboxdrv: Successfully loaded version 5.2.6 (interface 0x00290000)
usb 1-9: new low-speed USB device number 4 using xhci_hcd
usb 1-9: New USB device found, idVendor=046d, idProduct=c30e
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9: Product: HID compliant keyboard
usb 1-9: Manufacturer: Logitech
input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:046D:C30E.0004/input/input6
hid-generic 0003:046D:C30E.0004: input,hidraw3: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:14.0-9/input0
input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:046D:C30E.0005/input/input7
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: NCQ Send/Recv Log not supported
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: NCQ Send/Recv Log not supported
ata6.00: configured for UDMA/133
ata6: EH complete
ata6.00: exception Emask 0x10 SAct 0x70000005 SErr 0x400101 action 0x6 frozen
ata6.00: irq_stat 0x08000000, interface fatal error
ata6: SError: { RecovData UnrecovData Handshk }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/20:00:00:f8:5f/00:00:00:00:00/40 tag 0 ncq dma 16384 out
res 40/00:f0:80:f8:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/40:10:60:fc:5f/00:00:00:00:00/40 tag 2 ncq dma 32768 out
res 40/00:f0:80:f8:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/80:e0:c0:fa:5f/01:00:00:00:00/40 tag 28 ncq dma 196608 out
res 40/00:f0:80:f8:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/40:e8:e0:f9:5f/00:00:00:00:00/40 tag 29 ncq dma 32768 out
res 40/00:f0:80:f8:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/20:f0:80:f8:5f/00:00:00:00:00/40 tag 30 ncq dma 16384 out
res 40/00:f0:80:f8:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6: hard resetting link
hid-generic 0003:046D:C30E.0005: input,hidraw4: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:14.0-9/input1
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: NCQ Send/Recv Log not supported
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: NCQ Send/Recv Log not supported
ata6.00: configured for UDMA/133
ata6: EH complete
ata6.00: exception Emask 0x10 SAct 0x7c0 SErr 0x400100 action 0x6 frozen
ata6.00: irq_stat 0x08000000, interface fatal error
ata6: SError: { UnrecovData Handshk }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/20:30:80:f8:5f/00:00:00:00:00/40 tag 6 ncq dma 16384 out
res 40/00:38:e0:f9:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/40:38:e0:f9:5f/00:00:00:00:00/40 tag 7 ncq dma 32768 out
res 40/00:38:e0:f9:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/80:40:c0:fa:5f/01:00:00:00:00/40 tag 8 ncq dma 196608 out
res 40/00:38:e0:f9:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/40:48:60:fc:5f/00:00:00:00:00/40 tag 9 ncq dma 32768 out
res 40/00:38:e0:f9:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/20:50:00:f8:5f/00:00:00:00:00/40 tag 10 ncq dma 16384 out
res 40/00:38:e0:f9:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6: hard resetting link
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: NCQ Send/Recv Log not supported
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: NCQ Send/Recv Log not supported
ata6.00: configured for UDMA/133
ata6: EH complete
ata6: limiting SATA link speed to 3.0 Gbps
ata6.00: exception Emask 0x10 SAct 0x3e0000 SErr 0x400100 action 0x6 frozen
ata6.00: irq_stat 0x08000000, interface fatal error
ata6: SError: { UnrecovData Handshk }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/20:88:00:f8:5f/00:00:00:00:00/40 tag 17 ncq dma 16384 out
res 40/00:90:60:fc:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/40:90:60:fc:5f/00:00:00:00:00/40 tag 18 ncq dma 32768 out
res 40/00:90:60:fc:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/80:98:c0:fa:5f/01:00:00:00:00/40 tag 19 ncq dma 196608 out
res 40/00:90:60:fc:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/40:a0:e0:f9:5f/00:00:00:00:00/40 tag 20 ncq dma 32768 out
res 40/00:90:60:fc:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/20:a8:80:f8:5f/00:00:00:00:00/40 tag 21 ncq dma 16384 out
res 40/00:90:60:fc:5f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata6.00: status: { DRDY }
ata6: hard resetting link
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: NCQ Send/Recv Log not supported
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: NCQ Send/Recv Log not supported
ata6.00: configured for UDMA/133
ata6: EH complete
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
BTRFS info (device sda2): use zstd compression, level 0
BTRFS info (device sda2): disk space caching is enabled
systemd-journald[250]: Received request to flush runtime journal from PID 1
wmi_bus wmi_bus-PNP0C14:01: WQAA data block query control method not found
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
parport_pc 00:01: reported by Plug and Play ACPI
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
i801_smbus 0000:00:1f.4: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
PTP clock support registered
Linux agpgart interface v0.103
input: PC Speaker as /devices/platform/pcspkr/input/input8
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ppdev: user-space parallel port driver
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver snd-usb-audio
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: switching to amdgpudrmfb from simple
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (TONGA 0x1002:0x6939 0x1462:0x2015 0xF1).
[drm] register mmio base: 0xEFE00000
[drm] register mmio size: 262144
[drm] probing gen 2 caps for device 8086:1901 = 261ad03/e
[drm] probing mlw for device 8086:1901 = 261ad03
[drm] VCE enabled in physical mode
amdgpu 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: MS-V31412-F3
[drm] GPU post is not needed
[drm] Changing default dispclk from 600Mhz to 625Mhz
[drm] vm size is 64 GB, block size is 13-bit, fragment size is 9-bit
amdgpu 0000:01:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:01:00.0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 8191220 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400040000).
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
amdgpu: [powerplay] amdgpu: powerplay sw initialized
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000000400040, cpu addr 0x00000000a8918c76
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000004000c0, cpu addr 0x00000000ae5f13d4
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000000400140, cpu addr 0x000000000a92a685
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000004001c0, cpu addr 0x000000002fa6dab4
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000000400240, cpu addr 0x000000006ca7e809
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x00000000004002c0, cpu addr 0x0000000066c5d2c0
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000000400340, cpu addr 0x000000001a5752dc
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000004003c0, cpu addr 0x000000008c861db3
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000000400440, cpu addr 0x00000000086b1936
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x00000000004004e0, cpu addr 0x00000000257a4b44
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x0000000000400560, cpu addr 0x0000000009c5d3ac
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x00000000004005e0, cpu addr 0x00000000b300d585
[drm] Found UVD firmware Version: 1.65 Family ID: 10
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x000000f40035af40, cpu addr 0x000000000d06335b
[drm] Found VCE firmware Version: 52.8 Binary ID: 3
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000000004006e0, cpu addr 0x00000000f7169bca
amdgpu 0000:01:00.0: fence driver on ring 14 use gpu addr 0x0000000000400760, cpu addr 0x00000000d0fdfa94
amdgpu 0000:01:00.0: fence driver on ring 15 use gpu addr 0x00000000004007e0, cpu addr 0x000000004ed2e6e0
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 1c:1b:0d:6f:6b:59
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card1/input9
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card1/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card1/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card1/input12
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card1/input13
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card1/input14
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card1/input15
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card1/input16
[drm] DC: create_links: connectors_num: physical:4, virtual:0
[drm] Display Core initialized!
[drm] Rx Caps:
[drm] HBRx4 pass VS=0, PE=0
[drm] DELL P2416D: [Block 0]
[drm] DELL P2416D: [Block 1]
[drm] dc_link_detect: manufacturer_id = AC10, product_id = A0C4, serial_number = 30434855, manufacture_week = 42, manufacture_year = 25, display_name = DELL P2416D, speaker_flag = 1, audio_mode_count = 1
[drm] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 7
[drm] DELL P2416D: [Block 0]
[drm] DELL P2416D: [Block 1]
[drm] dc_link_detect: manufacturer_id = AC10, product_id = A0C3, serial_number = 31314C53, manufacture_week = 44, manufacture_year = 25, display_name = DELL P2416D, speaker_flag = 1, audio_mode_count = 1
[drm] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 7
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] ring test on 0 succeeded in 10 usecs
random: crng init done
[drm] ring test on 9 succeeded in 8 usecs
[drm] ring test on 1 succeeded in 16 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 5 usecs
[drm] ring test on 6 succeeded in 3 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] ring test on 8 succeeded in 3 usecs
[drm] ring test on 10 succeeded in 5 usecs
[drm] ring test on 11 succeeded in 5 usecs
[drm] ring test on 12 succeeded in 1 usecs
[drm] UVD initialized successfully.
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[drm] ring test on 13 succeeded in 21 usecs
[drm] ring test on 14 succeeded in 4 usecs
[drm] ring test on 15 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] fb mappable at 0xD0566000
[drm] vram apper at 0xD0000000
[drm] size 14745600
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
amdgpu 0000:01:00.0: kfd not supported on this ASIC
[drm] Initialized amdgpu 3.23.0 20150101 for 0000:01:00.0 on minor 0
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input18
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input19
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input20
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input21
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input22
[drm] {2560x1440, 2720x1481@241500Khz}
[drm] HBRx4 pass VS=1, PE=0
[drm] {2560x1440, 2720x1481@241500Khz}
[drm] {2560x1440, 2720x1481@241500Khz}
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[drm] {2560x1440, 2720x1481@241500Khz}
fuse init (API version 7.26)
nvme nvme0: async event result 00020001
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
serial 00:02: disabled
parport_pc 00:01: disabled
amdgpu 0000:01:00.0: 00000000e3c4884f unpin not necessary
e1000e: EEE TX LPI TIMER: 00000011
sd 5:0:0:0: [sda] Synchronizing SCSI cache
sd 5:0:0:0: [sda] Stopping disk
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
parport_pc 00:01: activated
serial 00:02: activated
rtc_cmos 00:05: Alarms can be up to one month in the future
sd 5:0:0:0: [sda] Starting disk
[drm] PCIE GART of 1024M enabled (table at 0x000000F400040000).
[drm] ring test on 0 succeeded in 11 usecs
[drm] ring test on 9 succeeded in 8 usecs
[drm] ring test on 1 succeeded in 15 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] ring test on 8 succeeded in 3 usecs
[drm] ring test on 10 succeeded in 5 usecs
[drm] ring test on 11 succeeded in 5 usecs
[drm] ring test on 12 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 13 succeeded in 0 usecs
[drm] ring test on 14 succeeded in 18 usecs
[drm] ring test on 15 succeeded in 7 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] Rx Caps:
[drm] HBRx4 pass VS=1, PE=0
[drm] DELL P2416D: [Block 0]
[drm] DELL P2416D: [Block 1]
[drm] dc_link_detect: manufacturer_id = AC10, product_id = A0C4, serial_number = 30434855, manufacture_week = 42, manufacture_year = 25, display_name = DELL P2416D, speaker_flag = 1, audio_mode_count = 1
[drm] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 7
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: NCQ Send/Recv Log not supported
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: NCQ Send/Recv Log not supported
ata6.00: configured for UDMA/133
[drm] DELL P2416D: [Block 0]
[drm] DELL P2416D: [Block 1]
[drm] dc_link_detect: manufacturer_id = AC10, product_id = A0C3, serial_number = 31314C53, manufacture_week = 44, manufacture_year = 25, display_name = DELL P2416D, speaker_flag = 1, audio_mode_count = 1
[drm] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 7
acpi LNXPOWER:16: Turning OFF
acpi LNXPOWER:15: Turning OFF
acpi LNXPOWER:14: Turning OFF
acpi LNXPOWER:13: Turning OFF
acpi LNXPOWER:12: Turning OFF
acpi LNXPOWER:11: Turning OFF
acpi LNXPOWER:10: Turning OFF
acpi LNXPOWER:0f: Turning OFF
acpi LNXPOWER:0e: Turning OFF
acpi LNXPOWER:0d: Turning OFF
acpi LNXPOWER:0c: Turning OFF
acpi LNXPOWER:0b: Turning OFF
acpi LNXPOWER:0a: Turning OFF
acpi LNXPOWER:09: Turning OFF
acpi LNXPOWER:08: Turning OFF
acpi LNXPOWER:07: Turning OFF
acpi LNXPOWER:06: Turning OFF
acpi LNXPOWER:05: Turning OFF
acpi LNXPOWER:04: Turning OFF
acpi LNXPOWER:03: Turning OFF
OOM killer enabled.
Restarting tasks ... done.
PM: suspend exit
[drm] {2560x1440, 2720x1481@241500Khz}
[drm] HBRx4 pass VS=1, PE=0
e1000e: enp0s31f6 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
tun: Universal TUN/TAP device driver, 1.6
[drm] {2560x1440, 2720x1481@241500Khz}