dmesg - m-player
microcode: microcode updated early to revision 0x7, date = 2013-08-20
Linux version 4.15.0-1-MANJARO (builduser@manjaro) (gcc version 7.2.1 20180116 (GCC)) #1 SMP PREEMPT Mon Jan 29 06:13:26 UTC 2018
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bbd9cfff] usable
BIOS-e820: [mem 0x00000000bbd9d000-0x00000000bbdeafff] ACPI NVS
BIOS-e820: [mem 0x00000000bbdeb000-0x00000000bbdf5fff] ACPI data
BIOS-e820: [mem 0x00000000bbdf6000-0x00000000bbdf8fff] ACPI NVS
BIOS-e820: [mem 0x00000000bbdf9000-0x00000000bbe1cfff] reserved
BIOS-e820: [mem 0x00000000bbe1d000-0x00000000bbe24fff] ACPI NVS
BIOS-e820: [mem 0x00000000bbe25000-0x00000000bbe27fff] reserved
BIOS-e820: [mem 0x00000000bbe28000-0x00000000bbe2cfff] ACPI NVS
BIOS-e820: [mem 0x00000000bbe2d000-0x00000000bbe4cfff] reserved
BIOS-e820: [mem 0x00000000bbe4d000-0x00000000bbe8ffff] ACPI NVS
BIOS-e820: [mem 0x00000000bbe90000-0x00000000bbffffff] usable
BIOS-e820: [mem 0x00000000bc000000-0x00000000bf7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.6 present.
DMI: Dell Inc. Inspiron N5010/0YXXJJ, BIOS A15 07/19/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbc000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcdd0-0x000fcddf] mapped at [ (ptrval)]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 97000 size 24576
BRK [0x7263e000, 0x7263efff] PGTABLE
BRK [0x7263f000, 0x7263ffff] PGTABLE
BRK [0x72640000, 0x72640fff] PGTABLE
BRK [0x72641000, 0x72641fff] PGTABLE
BRK [0x72642000, 0x72642fff] PGTABLE
BRK [0x72643000, 0x72643fff] PGTABLE
BRK [0x72644000, 0x72644fff] PGTABLE
BRK [0x72645000, 0x72645fff] PGTABLE
BRK [0x72646000, 0x72646fff] PGTABLE
BRK [0x72647000, 0x72647fff] PGTABLE
RAMDISK: [mem 0x36f99000-0x377c3fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0410 000024 (v03 DELL )
ACPI: XSDT 0x00000000BBDEB088 000064 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: FACP 0x00000000BBDF4A58 0000F4 (v04 DELL WN09 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BBDEB180 0098D2 (v02 DELL WN09 00005010 INTL 20051117)
ACPI: FACS 0x00000000BBE28F40 000040
ACPI: FACS 0x00000000BBE28F80 000040
ACPI: APIC 0x00000000BBDF4B50 000092 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: SSDT 0x00000000BBDF4BE8 00026E (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 0x00000000BBDF4E58 00003C (v01 DELL WN09 01072009 MSFT 00000097)
ACPI: SLIC 0x00000000BBDF4E98 000176 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: HPET 0x00000000BBDF5010 000038 (v01 DELL WN09 01072009 AMI. 00000003)
ACPI: OSFR 0x00000000BBDF5048 00008C (v01 DELL M08 07DB0713 ASL 00000061)
ACPI: DMAR 0x00000000BBDF50D8 000068 (v01 DELL WN09 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
NODE_DATA(0) allocated [mem 0x23fff9000-0x23fffcfff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000bbd9cfff]
node 0: [mem 0x00000000bbe90000-0x00000000bbffffff]
node 0: [mem 0x0000000100000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
On node 0 totalpages: 2080425
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11965 pages used for memmap
DMA32 zone: 765709 pages, LIFO batch:31
Normal zone: 20480 pages used for memmap
Normal zone: 1310720 pages, LIFO batch:31
Reserved but unavailable: 100 pages
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbbd9d000-0xbbdeafff]
PM: Registered nosave memory: [mem 0xbbdeb000-0xbbdf5fff]
PM: Registered nosave memory: [mem 0xbbdf6000-0xbbdf8fff]
PM: Registered nosave memory: [mem 0xbbdf9000-0xbbe1cfff]
PM: Registered nosave memory: [mem 0xbbe1d000-0xbbe24fff]
PM: Registered nosave memory: [mem 0xbbe25000-0xbbe27fff]
PM: Registered nosave memory: [mem 0xbbe28000-0xbbe2cfff]
PM: Registered nosave memory: [mem 0xbbe2d000-0xbbe4cfff]
PM: Registered nosave memory: [mem 0xbbe4d000-0xbbe8ffff]
PM: Registered nosave memory: [mem 0xbc000000-0xbf7fffff]
PM: Registered nosave memory: [mem 0xbf800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbf800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 43 pages/cpu @ (ptrval) s139264 r8192 d28672 u262144
pcpu-alloc: s139264 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 2047895
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8091940K/8321700K available (10252K kernel code, 1173K rwdata, 2828K rodata, 1372K init, 992K bss, 229760K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 29474 entries in 116 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 8448, nr_irqs: 488, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 2 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9078010ef0462 ecap f020e2
DMAR: RMRR base: 0x000000bbe0b000 end: 0x000000bbe18fff
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 1733.359 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3468.16 BogoMIPS (lpj=5777863)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V2 mitigation: Mitigation: Full generic retpoline
Freeing SMP alternatives memory: 24K
smpboot: CPU0: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz (family: 0x6, model: 0x1e, stepping: 0x5)
Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
core: CPU erratum AAJ80 worked around
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (27744.31 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbbd9d000-0xbbdeafff] (319488 bytes)
PM: Registering ACPI NVS region [mem 0xbbdf6000-0xbbdf8fff] (12288 bytes)
PM: Registering ACPI NVS region [mem 0xbbe1d000-0xbbe24fff] (32768 bytes)
PM: Registering ACPI NVS region [mem 0xbbe28000-0xbbe2cfff] (20480 bytes)
PM: Registering ACPI NVS region [mem 0xbbe4d000-0xbbe8ffff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 19:57:48, date: 02/05/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9540B5D38000 000724 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: GPE 0x01 active on init
ACPI: GPE 0x1B active on init
ACPI: Enabled 9 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbf09000-0xfbf0900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbf08000-0xfbf083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbf07000-0xfbf073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbf06000-0xfbf067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbf05000-0xfbf050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:02:00.0: [1002:68c1] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xfbe20000-0xfbe3ffff 64bit]
pci 0000:02:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x30: [mem 0xfbe00000-0xfbe1ffff pref]
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: [1002:aa60] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xfbe40000-0xfbe43fff 64bit]
pci 0000:02:00.1: enabling Extended Tags
pci 0000:02:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 11]
pci 0000:12:00.0: [14e4:4727] type 00 class 0x028000
pci 0000:12:00.0: reg 0x10: [mem 0xfbd00000-0xfbd03fff 64bit]
pci 0000:12:00.0: enabling Extended Tags
pci 0000:12:00.0: supports D1 D2
pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 12]
pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:13:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:13:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:13:00.0: reg 0x18: [mem 0xd0c10000-0xd0c10fff 64bit pref]
pci 0000:13:00.0: reg 0x20: [mem 0xd0c00000-0xd0c0ffff 64bit pref]
pci 0000:13:00.0: reg 0x30: [mem 0xfb300000-0xfb31ffff pref]
pci 0000:13:00.0: supports D1 D2
pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 13]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfb300000-0xfbcfffff]
pci 0000:00:1c.2: bridge window [mem 0xd0c00000-0xd15fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 15]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfa900000-0xfb2fffff]
pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd0afffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 20] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
pci 0000:02:00.0: vgaarb: setting as boot VGA device
pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:02:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbbd9d000-0xbbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
hpet: hpet6 irq 28 for MSI
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [mem 0xfe800000-0xfe8001ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs DLL0447 SYN0600 SYN0002 PNP0f13 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:05: [io 0x0400-0x047f] has been reserved
system 00:05: [io 0x1180-0x119f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 11] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 11] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 11] add_size 200000 add_align 100000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 12] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 12] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xd1600000-0xd17fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd1800000-0xd19fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd1a00000-0xd1bfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 11]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd17fffff]
pci 0000:00:1c.0: bridge window [mem 0xd1800000-0xd19fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 12]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.1: bridge window [mem 0xd1a00000-0xd1bfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 13]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfb300000-0xfbcfffff]
pci 0000:00:1c.2: bridge window [mem 0xd0c00000-0xd15fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 15]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfa900000-0xfb2fffff]
pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd0afffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 20]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:11: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:11: resource 1 [mem 0xd1600000-0xd17fffff]
pci_bus 0000:11: resource 2 [mem 0xd1800000-0xd19fffff 64bit pref]
pci_bus 0000:12: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:12: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:12: resource 2 [mem 0xd1a00000-0xd1bfffff 64bit pref]
pci_bus 0000:13: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:13: resource 1 [mem 0xfb300000-0xfbcfffff]
pci_bus 0000:13: resource 2 [mem 0xd0c00000-0xd15fffff 64bit pref]
pci_bus 0000:15: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:15: resource 1 [mem 0xfa900000-0xfb2fffff]
pci_bus 0000:15: resource 2 [mem 0xd0100000-0xd0afffff 64bit pref]
pci_bus 0000:20: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:20: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:20: resource 7 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 8364K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb7d9d000-0xbbd9d000] (64MB) mapped at [00000000f2e25c12-00000000f76e39c2]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:03.0: AER enabled with IRQ 29
pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.4:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0x000000007e0325fa, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x106e5, pf=0x10, revision=0x7
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1038951287, 0)->(1135915450, -96964163)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 6:807:1000
misc memory_bandwidth: hash matches
system 00:02: hash matches
rtc_cmos 00:01: setting system clock to 2018-02-05 19:57:49 UTC (1517860669)
Freeing unused kernel memory: 1372K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 1268K
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
libata version 3.00 loaded.
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbf08000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbf07000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06100 irq 34
ata2: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06180 irq 34
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06300 irq 34
ata6: DUMMY
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: CT120BX300SSD1, M2CR010, max UDMA/133
ata1.00: 234441648 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA CT120BX300SSD1 010 PQ: 0 ANSI: 5
ata2.00: ATA-8: ST9500325AS, D005DEM1, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST9500325AS DEM1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
tsc: Refined TSC clocksource calibration: 1733.333 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x18fc27ac6b3, max_idle_ns: 440795215955 ns
usb 1-1.6: new high-speed USB device number 3 using ehci-pci
usb 2-1.5: new high-speed USB device number 3 using ehci-pci
PM: Starting manual resume from disk
PM: Image not found (code -22)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
usb 2-1.6: new full-speed USB device number 4 using ehci-pci
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
hub 2-1.6:1.0: USB hub found
hub 2-1.6:1.0: 3 ports detected
systemd[1]: System is tainted: local-hwclock
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on Process Core Dump Socket.
EXT4-fs (sda2): re-mounted. Opts: discard
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:01/input/input4
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ACPI: AC Adapter [AC] (on-line)
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
usb 2-1.6.1: new full-speed USB device number 5 using ehci-pci
acpi device:06: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input6
ACPI: Battery Slot [BAT0] (battery absent)
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (58 C)
wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
systemd-journald[251]: Received request to flush runtime journal from PID 1
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:13:00.0 eth0: RTL8102e at 0x00000000f84f5289, f0:4d:a2:a6:d8:49, XID 04e00000 IRQ 36
input: PC Speaker as /devices/platform/pcspkr/input/input7
Linux agpgart interface v0.103
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
cfg80211: Loading compiled-in X.509 certificates for regulatory database
usb 2-1.6.2: new full-speed USB device number 6 using ehci-pci
snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
media: Linux media interface: v0.10
clocksource: Switched to clocksource tsc
snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_idt hdaudioC0D0: inputs:
snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xc
snd_hda_codec_idt hdaudioC0D0: Mic=0xa
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input9
Linux video capture interface: v2.00
usbcore: registered new interface driver usb-storage
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input13
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
usbcore: registered new interface driver uas
dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
ums-realtek 2-1.5:1.0: USB Mass Storage device detected
r8169 0000:13:00.0 enp19s0: renamed from eth0
scsi host6: usb-storage 2-1.5:1.0
usbcore: registered new interface driver ums-realtek
wl: loading out-of-tree module taints kernel.
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6480)
uvcvideo 1-1.6:1.0: Entity type for entity Extension 5 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Processing 3 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
input: Laptop_Integrated_Webcam_1.3M: as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
hidraw: raw HID events driver (C) Jiri Kosina
Adding 10239996k swap on /dev/sdb1. Priority:-2 extents:1 across:10239996k FS
wl 0000:12:00.0 wlp18s0: renamed from wlan0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID 413c:8161 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/0003:413C:8161.0001/input/input15
[drm] radeon kernel modesetting enabled.
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1 0x1028:0x0447 0x00).
ATOM BIOS: Dell
radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:02:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 4052492 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading REDWOOD Microcode
hid-generic 0003:413C:8161.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1d.0-1.6.1/input0
input: HID 413c:8162 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/0003:413C:8162.0002/input/input16
hid-generic 0003:413C:8162.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1d.0-1.6.2/input0
[drm] Internal thermal controller with fan control
mousedev: PS/2 mouse device common for all mice
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000005b3a2cae
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x000000005cf51b37
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000101730b2
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:02:00.0: radeon: MSI limited to 32-bit
radeon 0000:02:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
random: crng init done
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
psmouse serio1: synaptics: queried max coordinates: x [..5650], y [..4710]
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 581785
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[drm] ib test on ring 5 succeeded
usb 2-1.6.3: new full-speed USB device number 7 using ehci-pci
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS-1
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
IPv6: ADDRCONF(NETDEV_UP): enp19s0: link is not ready
r8169 0000:13:00.0 enp19s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp19s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp18s0: link is not ready
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
[drm] fb mappable at 0xC034D000
[drm] vram apper at 0xC0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
IPv6: ADDRCONF(NETDEV_UP): wlp18s0: link is not ready
Console: switching to colour frame buffer device 170x48
radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:02:00.0 on minor 0
CE: hpet increased min_delta_ns to 20115 nsec
IPv6: ADDRCONF(NETDEV_UP): wlp18s0: link is not ready
fuse init (API version 7.26)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
traps: xfwm4[941] trap int3 ip:7f5cda5a1982 sp:7ffdf78ce2a0 error:0 in libglib-2.0.so.0.5400.3[7f5cda551000+113000]
sd 6:0:0:0: [sdc] Attached SCSI removable disk
usb 2-1.5: USB disconnect, device number 3
IPv6: ADDRCONF(NETDEV_CHANGE): wlp18s0: link becomes ready
CE: hpet2 increased min_delta_ns to 20115 nsec
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/W MODULE].
raid6: sse2x1 gen() 6561 MB/s
raid6: sse2x1 xor() 5291 MB/s
raid6: sse2x2 gen() 8569 MB/s
raid6: sse2x2 xor() 6403 MB/s
raid6: sse2x4 gen() 9795 MB/s
raid6: sse2x4 xor() 6975 MB/s
raid6: using algorithm sse2x4 gen() 9795 MB/s
raid6: .... xor() 6975 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 9948.000 MB/sec
generic_sse: 8882.400 MB/sec
xor: using function: prefetch64-sse (9948.000 MB/sec)
Btrfs loaded, crc32c=crc32c-intel
CE: hpet4 increased min_delta_ns to 20115 nsec