dmesg - ramtest-ez2
microcode: microcode updated early to revision 0x1c, date = 2015-02-26
Linux version 4.14.14-1-MANJARO (builduser@manjaro) (gcc version 7.2.1 20171224 (GCC)) #1 SMP PREEMPT Wed Jan 17 22:34:54 UTC 2018
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
BIOS-e820: [mem 0x000000000009c000-0x000000000009cfff] reserved
BIOS-e820: [mem 0x000000000009d000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x000000007847cfff] usable
BIOS-e820: [mem 0x000000007847d000-0x000000007867efff] reserved
BIOS-e820: [mem 0x000000007867f000-0x00000000b6a05fff] usable
BIOS-e820: [mem 0x00000000b6a06000-0x00000000b6c05fff] type 20
BIOS-e820: [mem 0x00000000b6c06000-0x00000000bae9efff] reserved
BIOS-e820: [mem 0x00000000bae9f000-0x00000000baf9efff] ACPI NVS
BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023e5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by Lenovo
efi: ACPI 2.0=0xbaffe014 ACPI=0xbaffe000 SMBIOS=0xbae9e000
random: fast init done
SMBIOS 2.7 present.
DMI: LENOVO 2344BMU/2344BMU, BIOS G1ETA7WW (2.67 ) 12/08/2014
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23e600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BC000000 mask FFC000000 uncachable
4 base 0BB000000 mask FFF000000 uncachable
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask FC0000000 write-back
7 base 23F000000 mask FFF000000 uncachable
8 base 23E800000 mask FFF800000 uncachable
9 base 23E600000 mask FFFE00000 uncachable
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8898c0096000] 96000 size 24576
BRK [0x4e635000, 0x4e635fff] PGTABLE
BRK [0x4e636000, 0x4e636fff] PGTABLE
BRK [0x4e637000, 0x4e637fff] PGTABLE
BRK [0x4e638000, 0x4e638fff] PGTABLE
BRK [0x4e639000, 0x4e639fff] PGTABLE
BRK [0x4e63a000, 0x4e63afff] PGTABLE
BRK [0x4e63b000, 0x4e63bfff] PGTABLE
BRK [0x4e63c000, 0x4e63cfff] PGTABLE
BRK [0x4e63d000, 0x4e63dfff] PGTABLE
BRK [0x4e63e000, 0x4e63efff] PGTABLE
BRK [0x4e63f000, 0x4e63ffff] PGTABLE
BRK [0x4e640000, 0x4e640fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x36f09000-0x3777bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BAFFE014 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BAFFE170 0000CC (v01 LENOVO TP-G1 00002670 PTL 00000002)
ACPI: FACP 0x00000000BAFE6000 00010C (v05 LENOVO TP-G1 00002670 PTL 00000002)
ACPI: DSDT 0x00000000BAFE8000 0103F7 (v01 LENOVO TP-G1 00002670 INTL 20061109)
ACPI: FACS 0x00000000BAF5A000 000040
ACPI: SLIC 0x00000000BAFFD000 000176 (v01 LENOVO TP-G1 00002670 PTL 00000001)
ACPI: TCPA 0x00000000BAFFC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: SSDT 0x00000000BAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
ACPI: SSDT 0x00000000BAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
ACPI: SSDT 0x00000000BAFF9000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
ACPI: HPET 0x00000000BAFE4000 000038 (v01 LENOVO TP-G1 00002670 PTL 00000002)
ACPI: APIC 0x00000000BAFE3000 000098 (v01 LENOVO TP-G1 00002670 PTL 00000002)
ACPI: MCFG 0x00000000BAFE2000 00003C (v01 LENOVO TP-G1 00002670 PTL 00000002)
ACPI: ECDT 0x00000000BAFE1000 000052 (v01 LENOVO TP-G1 00002670 PTL 00000002)
ACPI: FPDT 0x00000000BAFE0000 000064 (v01 LENOVO TP-G1 00002670 PTL 00000002)
ACPI: ASF! 0x00000000BAFE7000 0000A5 (v32 LENOVO TP-G1 00002670 PTL 00000002)
ACPI: UEFI 0x00000000BAFDF000 00003E (v01 LENOVO TP-G1 00002670 PTL 00000002)
ACPI: UEFI 0x00000000BAFDE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: MSDM 0x00000000BAFDD000 000055 (v03 LENOVO TP-G1 00002670 PTL 00000002)
ACPI: SSDT 0x00000000BAFDC000 000C51 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0x00000000BAFDB000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: DMAR 0x00000000BAFDA000 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: UEFI 0x00000000BAFD9000 0002A6 (v01 LENOVO TP-G1 00002670 PTL 00000002)
ACPI: DBG2 0x00000000BAFD8000 0000E9 (v00 LENOVO TP-G1 00002670 PTL 00000002)
ACPI: BGRT 0x00000000BAFD7000 000038 (v00 LENOVO TP-G1 00002670 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023e5fffff]
NODE_DATA(0) allocated [mem 0x23e5f8000-0x23e5fbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023e5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x000000000009d000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x0000000040003fff]
node 0: [mem 0x0000000040005000-0x000000007847cfff]
node 0: [mem 0x000000007867f000-0x00000000b6a05fff]
node 0: [mem 0x00000000bafff000-0x00000000baffffff]
node 0: [mem 0x0000000100000000-0x000000023e5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023e5fffff]
On node 0 totalpages: 2050976
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11609 pages used for memmap
DMA32 zone: 742916 pages, LIFO batch:31
Normal zone: 20376 pages used for memmap
Normal zone: 1304064 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000bba00000-0x00000000bf9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
efi_bgrt: Ignoring BGRT: invalid version 0 (expected 1)
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009e000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0x7847d000-0x7867efff]
PM: Registered nosave memory: [mem 0xb6a06000-0xb6c05fff]
PM: Registered nosave memory: [mem 0xb6c06000-0xbae9efff]
PM: Registered nosave memory: [mem 0xbae9f000-0xbaf9efff]
PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xf80f7fff]
PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
e820: [mem 0xbfa00000-0xf80f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 42 pages/cpu @ffff889afe200000 s134168 r8192 d29672 u262144
pcpu-alloc: s134168 r8192 d29672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 2018903
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7907708K/8203904K available (10252K kernel code, 1163K rwdata, 2812K rodata, 1352K init, 992K bss, 296196K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 29419 entries in 115 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 8448, nr_irqs: 488, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2594.012 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.19 BogoMIPS (lpj=8646706)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170728
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V2 mitigation: Vulnerable: Minimal generic ASM retpoline
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 4
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000ba470000 end: 0x000000ba486fff
DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (20760.76 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbae9f000-0xbaf9efff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 17:17:47, date: 01/27/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \: Used as first EC
ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \: Used as boot ECDT EC to handle transactions
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF889AF47D8000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF889AF4130000 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF889AF4139E00 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:00: root bus resource [bus 00-3f]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf3920000-0xf392ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf3935000-0xf393500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7]
pci 0000:00:16.3: reg 0x14: [mem 0xf393c000-0xf393cfff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf3900000-0xf391ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf393b000-0xf393bfff]
pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf393a000-0xf393a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf3930000-0xf3933fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf3939000-0xf39393ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf]
pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb]
pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf3938000-0xf39387ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf3934000-0xf39340ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [10de:0def] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [1180:e823] type 00 class 0x088001
pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:02:00.0: reg 0x10: [mem 0xf3100000-0xf31000ff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf38fffff]
pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf3000000-0xf3001fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf3000000-0xf30fffff]
acpiphp: Slot [1] registered
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xf2800000-0xf2ffffff]
pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: setting as boot device
pci 0000:00:02.0: vgaarb: no bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0x7847d000-0x7bffffff]
e820: reserve RAM buffer [mem 0xb6a06000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
e820: reserve RAM buffer [mem 0x23e600000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x167f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf38fffff]
pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf3000000-0xf30fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xf2800000-0xf2ffffff]
pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xf3100000-0xf38fffff]
pci_bus 0000:02: resource 2 [mem 0xf1800000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf3000000-0xf30fffff]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xf2800000-0xf2ffffff]
pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf27fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8652K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xaebcf000-0xb2bcf000] (64MB) mapped at [ffff88996ebcf000-ffff889972bcefff]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
io scheduler bfq-sq registered (default)
BFQ I/O-scheduler: v8r12 (with cgroups support)
io scheduler bfq-mq registered
BFQ I/O-scheduler: v8r12 (with cgroups support)
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 5632k, total 5632k
efifb: mode is 1600x900x32, linelength=6400, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 200x56
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
0000:00:16.3: ttyS0 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x306a9, pf=0x10, revision=0x1c
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (601715436, 0)->(644084924, -42369488)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 2:521:290
tty tty23: hash matches
rtc_cmos 00:02: setting system clock to 2018-01-27 17:17:47 UTC (1517073467)
Freeing unused kernel memory: 1352K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 1284K
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
SCSI subsystem initialized
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf393a000
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 4)
mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3939000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf3938000 port 0xf3938100 irq 26
ata2: SATA max UDMA/133 abar m2048@0xf3938000 port 0xf3938180 irq 26
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf3938000 port 0xf3938300 irq 26
ata6: DUMMY
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
mmc0: new high speed SDHC card at address aaaa
mmcblk0: mmc0:aaaa SL32G 29.7 GiB
mmcblk0: p1 p2
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ATA-8: ST250LT003-9YG14C, 0003DEM1, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST250LT003-9YG14 DEM1 PQ: 0 ANSI: 5
tsc: Refined TSC clocksource calibration: 2594.107 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647d583cf, max_idle_ns: 440795304232 ns
usb 1-1.4: new full-speed USB device number 4 using ehci-pci
usb 1-1.6: new high-speed USB device number 5 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ATAPI: MATSHITADVD-RAM UJ8C0, SB01, max UDMA/133
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C0 SB01 PQ: 0 ANSI: 5
ata5: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
clocksource: Switched to clocksource tsc
PM: Starting manual resume from disk
PM: Image not found (code -22)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Login Prompts.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on udev Kernel Socket.
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
EXT4-fs (sda2): re-mounted. Opts: (null)
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2594107955 Hz
vboxdrv: Successfully loaded version 5.2.4 (interface 0x00290000)
systemd-journald[219]: Received request to flush runtime journal from PID 1
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (36 C)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS G1ETA7WW (2.67 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad T430, model 2344BMU
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Adding 8506064k swap on /dev/sda3. Priority:-2 extents:1 across:8506064k FS
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
input: PC Speaker as /devices/platform/pcspkr/input/input6
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:d9:8e:72
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
iTCO_vendor_support: vendor-support=0
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
e1000e 0000:00:19.0 enp0s25: renamed from eth0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Linux agpgart interface v0.103
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
mousedev: PS/2 mouse device common for all mice
media: Linux media interface: v0.10
Linux video capture interface: v2.00
ACPI Warning: \_SB.PCI0.PEG.VID._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170728/nsarguments-100)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG_.VID_ handle
nouveau 0000:01:00.0: enabling device (0004 -> 0007)
checking generic (e0000000 580000) vs hw (c0000000 10000000)
checking generic (e0000000 580000) vs hw (d0000000 2000000)
nouveau 0000:01:00.0: NVIDIA GF108 (0c1780a1)
ACPI Error: Field [TBF3] at bit offset/length 262144/32768 exceeds size of target Buffer (262144 bits) (20170728/dsopcode-235)
ACPI Error: Method parse/execution failed \_SB.PCI0.PEG.VID.GETB, AE_AML_BUFFER_LIMIT (20170728/psparse-550)
ACPI Error: Method parse/execution failed \_SB.PCI0.PEG.VID._ROM, AE_AML_BUFFER_LIMIT (20170728/psparse-550)
failed to evaluate ROM got AE_AML_BUFFER_LIMIT
nouveau 0000:01:00.0: bios: version 70.08.b7.05.01
nouveau 0000:01:00.0: fb: 1024 MiB DDR3
i915 0000:00:02.0: enabling device (0006 -> 0007)
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 580000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=mem
vga_switcheroo: enabled
[TTM] Zone kernel: Available graphics memory: 3993604 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.0
nouveau 0000:01:00.0: DRM: DCB outp 00: 01800323 00010034
nouveau 0000:01:00.0: DRM: DCB outp 01: 02811300 00000000
nouveau 0000:01:00.0: DRM: DCB outp 02: 028223a6 0f220010
nouveau 0000:01:00.0: DRM: DCB outp 03: 02822362 00020010
nouveau 0000:01:00.0: DRM: DCB outp 04: 048333b6 0f220010
nouveau 0000:01:00.0: DRM: DCB outp 05: 04833372 00020010
nouveau 0000:01:00.0: DRM: DCB outp 06: 088443c6 0f220010
nouveau 0000:01:00.0: DRM: DCB outp 07: 08844382 00020010
nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040
nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
nouveau 0000:01:00.0: DRM: DCB conn 02: 00110246
nouveau 0000:01:00.0: DRM: DCB conn 03: 00220346
nouveau 0000:01:00.0: DRM: DCB conn 04: 01400446
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[drm] Cannot find any crtc or sizes
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 1
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input10
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
fbcon: inteldrmfb (fb0) is primary device
[drm] Cannot find any crtc or sizes
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3202: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
Console: switching to colour frame buffer device 200x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2db)
uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usbcore: registered new interface driver btusb
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM: features 0x07
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
thinkpad_acpi: EC reports that Thermal Table has changed
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
thinkpad_acpi: EC reports that Thermal Table has changed
[drm] Cannot find any crtc or sizes
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
fuse init (API version 7.26)
thinkpad_acpi: EC reports that Thermal Table has changed
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with f8:7b:8c:0b:4d:d9
wlp3s0: send auth to f8:7b:8c:0b:4d:d9 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with f8:7b:8c:0b:4d:d9 (try 1/3)
wlp3s0: RX AssocResp from f8:7b:8c:0b:4d:d9 (capab=0x411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
thinkpad_acpi: EC reports that Thermal Table has changed
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
wlp3s0: deauthenticating from f8:7b:8c:0b:4d:d9 by local choice (Reason: 3=DEAUTH_LEAVING)
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000011
thinkpad_acpi: EC reports that Thermal Table has changed
sd 0:0:0:0: [sda] Stopping disk
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/133
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
usb 1-1.4:1.0: rebind failed: -517
usb 1-1.4:1.1: rebind failed: -517
OOM killer enabled.
Restarting tasks ... done.
PM: suspend exit
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM: features 0x07
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
thinkpad_acpi: EC reports that Thermal Table has changed
wlp3s0: authenticate with f8:7b:8c:0b:4d:d9
wlp3s0: send auth to f8:7b:8c:0b:4d:d9 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with f8:7b:8c:0b:4d:d9 (try 1/3)
wlp3s0: RX AssocResp from f8:7b:8c:0b:4d:d9 (capab=0x411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: deauthenticating from f8:7b:8c:0b:4d:d9 by local choice (Reason: 3=DEAUTH_LEAVING)
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
PM: hibernation entry
PM: Syncing filesystems ...
PM: done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
PM: Marking nosave pages: [mem 0x0009c000-0x0009cfff]
PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
PM: Marking nosave pages: [mem 0x40004000-0x40004fff]
PM: Marking nosave pages: [mem 0x7847d000-0x7867efff]
PM: Marking nosave pages: [mem 0xb6a06000-0xbaffefff]
PM: Marking nosave pages: [mem 0xbb000000-0xffffffff]
PM: Basic memory bitmaps created
PM: Preallocating image memory... done (allocated 774538 pages)
PM: Allocated 3098152 kbytes in 0.50 seconds (6196.30 MB/s)
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
thinkpad_acpi: EC reports that Thermal Table has changed
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
PM: Creating hibernation image:
PM: Need to copy 773547 pages
PM: Normal pages needed: 773547 + 1024, available pages: 1277256
PM: Hibernation image created (773547 pages copied)
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: button: The lid device is not compliant to SW_LID.
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/133
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
PM: Using 3 thread(s) for compression.
PM: Compressing and saving image data (775058 pages)...
PM: Image saving progress: 0%
PM: Image saving progress: 10%
PM: Image saving progress: 20%
PM: Image saving progress: 30%
PM: Image saving progress: 40%
PM: Image saving progress: 50%
PM: Image saving progress: 60%
PM: Image saving progress: 70%
PM: Image saving progress: 80%
PM: Image saving progress: 90%
PM: Image saving progress: 100%
PM: Image saving done.
PM: Wrote 3100232 kbytes in 31.25 seconds (99.20 MB/s)
PM: S
|
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/133
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
usb 1-1.4:1.0: rebind failed: -517
usb 1-1.4:1.1: rebind failed: -517
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM: features 0x07
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
PM: Basic memory bitmaps freed
OOM killer enabled.
Restarting tasks ... done.
PM: hibernation exit
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
thinkpad_acpi: EC reports that Thermal Table has changed
wlp3s0: authenticate with f8:7b:8c:0b:4d:d9
wlp3s0: send auth to f8:7b:8c:0b:4d:d9 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with f8:7b:8c:0b:4d:d9 (try 1/3)
wlp3s0: RX AssocResp from f8:7b:8c:0b:4d:d9 (capab=0x411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
thinkpad_acpi: EC reports that Thermal Table has changed
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
wlp3s0: deauthenticating from f8:7b:8c:0b:4d:d9 by local choice (Reason: 3=DEAUTH_LEAVING)
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000011
sd 0:0:0:0: [sda] Stopping disk
thinkpad_acpi: EC reports that Thermal Table has changed
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
thinkpad_acpi: EC reports that Thermal Table has changed
sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/133
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
usb 1-1.4:1.0: rebind failed: -517
usb 1-1.4:1.1: rebind failed: -517
OOM killer enabled.
Restarting tasks ... done.
PM: suspend exit
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM: features 0x07
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
thinkpad_acpi: EC reports that Thermal Table has changed
wlp3s0: authenticate with f8:7b:8c:0b:4d:d9
wlp3s0: send auth to f8:7b:8c:0b:4d:d9 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with f8:7b:8c:0b:4d:d9 (try 1/3)
wlp3s0: RX AssocResp from f8:7b:8c:0b:4d:d9 (capab=0x411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
thinkpad_acpi: EC reports that Thermal Table has changed
thinkpad_acpi: EC reports that Thermal Table has changed
thinkpad_acpi: EC reports that Thermal Table has changed
thinkpad_acpi: EC reports that Thermal Table has changed
thinkpad_acpi: EC reports that Thermal Table has changed
thinkpad_acpi: EC reports that Thermal Table has changed
thinkpad_acpi: EC reports that Thermal Table has changed
thinkpad_acpi: EC reports that Thermal Table has changed
thinkpad_acpi: EC reports that Thermal Table has changed
thinkpad_acpi: EC reports that Thermal Table has changed
thinkpad_acpi: EC reports that Thermal Table has changed