dmesg - bk003a
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-696.18.7.el6.x86_64 (mockbuild@x86-042.build.eng.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-18) (GCC) ) #1 SMP Thu Dec 28 20:15:47 EST 2017
Command line: ro root=/dev/mapper/vg0-root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg0/swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_NO_DM KEYBOARDTYPE=pc KEYTABLE=us rd_LVM_LV=vg0/root rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c800 (usable)
BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bddac000 (usable)
BIOS-e820: 00000000bddac000 - 00000000bddde000 (ACPI data)
BIOS-e820: 00000000bddde000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000023ffff000 (usable)
SMBIOS version 2.8 @ 0xF4F40
SMBIOS 2.8 present.
DMI: HP ProLiant DL380p Gen8, BIOS P70 08/02/2014
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x23ffff max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbddac max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bddac000
0000000000 - 0080000000 page 1G
0080000000 - 00bdc00000 page 2M
00bdc00000 - 00bddac000 page 4k
kernel direct mapping tables up to bddac000 @ 8000-b000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-000000023ffff000
0100000000 - 0200000000 page 1G
0200000000 - 023fe00000 page 2M
023fe00000 - 023ffff000 page 4k
kernel direct mapping tables up to 23ffff000 @ a000-d000
RAMDISK: 367bd000 - 37fefe1b
ACPI: Deleted _OSI(Windows 2012)
ACPI: Deleted _OSI(Windows 2013)
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 00000000bddaed00 000D4 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FACP 00000000bddaee40 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-615)
ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20090903/tbfadt-615)
ACPI: DSDT 00000000bddaef40 026DC (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000bddac140 00040
ACPI: SPCR 00000000bddac180 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 00000000bddac200 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 00000000bddac240 00038 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FFFF 00000000bddac280 00064 (v02 HP ProLiant 00000002 Ò? 0000162E)
ACPI: SPMI 00000000bddac300 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: ERST 00000000bddac340 00230 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 00000000bddac580 0025E (v01 HP ProLiant 00000002 00000000)
ACPI: SRAT 00000000bddac800 00750 (v01 HP Proliant 00000001 Ò? 0000162E)
ACPI: FFFF 00000000bddacf80 00176 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: BERT 00000000bddad100 00030 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: HEST 00000000bddad140 000BC (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: DMAR 00000000bddad200 003D8 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: FFFF 00000000bddaec40 00030 (v01 HP ProLiant 00000001 00000000)
ACPI: PCCT 00000000bddaec80 0006E (v01 HP Proliant 00000001 PH 0000504D)
ACPI: SSDT 00000000bddb1640 00103 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 00000000bddb1780 0038A (v02 HP riser0 00000002 INTL 20030228)
ACPI: SSDT 00000000bddb1b40 00536 (v03 HP riser1a 00000002 INTL 20030228)
ACPI: SSDT 00000000bddb2080 00BB9 (v01 HP pcc 00000001 INTL 20120503)
ACPI: SSDT 00000000bddb2c40 00377 (v01 HP pmab 00000001 INTL 20120503)
ACPI: SSDT 00000000bddb2fc0 05524 (v01 HP pcc2 00000001 INTL 20120503)
ACPI: SSDT 00000000bddb8500 03120 (v01 INTEL PPM RCM 00000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 0 -> APIC 8 -> Node 0
SRAT: PXM 0 -> APIC 9 -> Node 0
SRAT: PXM 0 -> APIC 16 -> Node 0
SRAT: PXM 0 -> APIC 17 -> Node 0
SRAT: PXM 0 -> APIC 18 -> Node 0
SRAT: PXM 0 -> APIC 19 -> Node 0
SRAT: PXM 0 -> APIC 20 -> Node 0
SRAT: PXM 0 -> APIC 21 -> Node 0
SRAT: PXM 0 -> APIC 22 -> Node 0
SRAT: PXM 0 -> APIC 23 -> Node 0
SRAT: PXM 0 -> APIC 24 -> Node 0
SRAT: PXM 0 -> APIC 25 -> Node 0
SRAT: Node 0 PXM 0 0-240000000
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-000000023ffff000
NODE_DATA [000000000000c000 - 000000000003ffff]
bootmap [0000000000040000 - 0000000000087fff] pages 48
(8 early reservations) ==> bootmem [0000000000 - 023ffff000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000204ba24] TEXT DATA BSS ==> [0001000000 - 000204ba24]
#3 [00367bd000 - 0037fefe1b] RAMDISK ==> [00367bd000 - 0037fefe1b]
#4 [000009c800 - 0000100000] BIOS reserved ==> [000009c800 - 0000100000]
#5 [000204c000 - 000204c871] BRK ==> [000204c000 - 000204c871]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000c000] PGTABLE ==> [000000a000 - 000000c000]
found SMP MP-table at [ffff8800000f4f80] f4f80
Found 129MB of memory at 48MB for crashkernel auto
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 9215MB)
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0023ffff
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009c
0: 0x00000100 -> 0x000bddac
0: 0x00100000 -> 0x0023ffff
On node 0 totalpages: 2088262
DMA zone: 56 pages used for memmap
DMA zone: 106 pages reserved
DMA zone: 3833 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 759268 pages, LIFO batch:31
Normal zone: 17920 pages used for memmap
Normal zone: 1292799 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x18] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x17] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x19] enabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x00] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 0, version 32, address 0xfec10000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 64 CPUs, 44 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bddac000 - 00000000bddde000
PM: Registered nosave memory: 00000000bddde000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88002f600000 s104088 r8192 d22888 u262144
pcpu-alloc: s104088 r8192 d22888 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 36 37 38 39 [0] 40 41 42 43 44 45 46 47
pcpu-alloc: [0] 48 49 50 51 52 53 54 55 [0] 56 57 58 59 60 61 62 63
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055900
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg0-root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg0/swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=129M@48M rd_NO_DM KEYBOARDTYPE=pc KEYTABLE=us rd_LVM_LV=vg0/root rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
Memory: 7989784k/9437180k available (5484k kernel code, 1084132k absent, 363264k reserved, 6944k data, 1332k init)
x86/pti: Kernel page table isolation enabled
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1328
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
TSC: cpu family 6 model 62, tsc initial value = 3fe3341f6e2d6
Fast TSC calibration failed
TSC: PIT calibration matches HPET. 1 loops
Detected 2194.572 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.14 BogoMIPS (lpj=2194572)
pid_max: default: 65536 minimum: 512
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
FEATURE SPEC_CTRL Not Present
FEATURE IBPB_SUPPORT Not Present
mce: CPU supports 27 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22006 entries in 87 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000f8ffe000 flags: 0x1
dmar: IOMMU 0: reg_base_addr f8ffe000 ver 1:0 cap d2078c106f0466 ecap f020de
dmar: RMRR base: 0x000000bdffd000 end: 0x000000bdffffff
dmar: RMRR base: 0x000000bdff6000 end: 0x000000bdffcfff
dmar: RMRR base: 0x000000bdf83000 end: 0x000000bdf84fff
dmar: RMRR base: 0x000000bdf7f000 end: 0x000000bdf82fff
dmar: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
dmar: RMRR base: 0x000000bdf6e000 end: 0x000000bdf6efff
dmar: RMRR base: 0x000000000f4000 end: 0x000000000f4fff
dmar: RMRR base: 0x000000000e8000 end: 0x000000000e8fff
dmar: RMRR base: 0x000000bddde000 end: 0x000000bdddefff
dmar: ATSR flags: 0x0
IOAPIC id 8 under DRHD base 0xf8ffe000
IOAPIC id 0 under DRHD base 0xf8ffe000
HPET id 0 under DRHD base 0xf8ffe000
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
APIC routing finalized to physical flat.
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19
Brought up 20 CPUs
Total of 20 processors activated (87782.88 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255
PCI: MCFG area at c0000000 reserved in E820
PCI: Using MMCONFIG at c0000000 - cfffffff
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL380 detected, enabling pci=bfsort.
PMU erratum BJ122, BV98, HSD29 worked around, HT is on
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xfbffffff]
pci_root PNP0A08:00: host bridge window [io 0x1000-0xffff]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb]
pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: PME# disabled
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: PME# disabled
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:04.0: reg 10: [mem 0xfacf0000-0xfacf3fff 64bit]
pci 0000:00:04.1: reg 10: [mem 0xface0000-0xface3fff 64bit]
pci 0000:00:04.2: reg 10: [mem 0xfacd0000-0xfacd3fff 64bit]
pci 0000:00:04.3: reg 10: [mem 0xfacc0000-0xfacc3fff 64bit]
pci 0000:00:04.4: reg 10: [mem 0xfacb0000-0xfacb3fff 64bit]
pci 0000:00:04.5: reg 10: [mem 0xfaca0000-0xfaca3fff 64bit]
pci 0000:00:04.6: reg 10: [mem 0xfac90000-0xfac93fff 64bit]
pci 0000:00:04.7: reg 10: [mem 0xfac80000-0xfac83fff 64bit]
pci 0000:00:05.4: reg 10: [mem 0xfac70000-0xfac70fff]
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xfac60000-0xfac603ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xfac50000-0xfac503ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x4000-0x4007]
pci 0000:00:1f.2: reg 14: [io 0x4008-0x400b]
pci 0000:00:1f.2: reg 18: [io 0x4010-0x4017]
pci 0000:00:1f.2: reg 1c: [io 0x4018-0x401b]
pci 0000:00:1f.2: reg 20: [io 0x4020-0x402f]
pci 0000:00:1f.2: reg 24: [io 0x4030-0x403f]
pci 0000:00:01.0: PCI bridge to [bus 07-07]
pci 0000:00:01.1: PCI bridge to [bus 13-13]
pci 0000:03:00.0: reg 10: [mem 0xfabf0000-0xfabfffff 64bit pref]
pci 0000:03:00.0: reg 18: [mem 0xfabe0000-0xfabeffff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xfabd0000-0xfabdffff 64bit pref]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: reg 10: [mem 0xfabc0000-0xfabcffff 64bit pref]
pci 0000:03:00.1: reg 18: [mem 0xfabb0000-0xfabbffff 64bit pref]
pci 0000:03:00.1: reg 20: [mem 0xfaba0000-0xfabaffff 64bit pref]
pci 0000:03:00.1: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: PME# disabled
pci 0000:03:00.2: reg 10: [mem 0xfab90000-0xfab9ffff 64bit pref]
pci 0000:03:00.2: reg 18: [mem 0xfab80000-0xfab8ffff 64bit pref]
pci 0000:03:00.2: reg 20: [mem 0xfab70000-0xfab7ffff 64bit pref]
pci 0000:03:00.2: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.2: PME# supported from D0 D3hot D3cold
pci 0000:03:00.2: PME# disabled
pci 0000:03:00.3: reg 10: [mem 0xfab60000-0xfab6ffff 64bit pref]
pci 0000:03:00.3: reg 18: [mem 0xfab50000-0xfab5ffff 64bit pref]
pci 0000:03:00.3: reg 20: [mem 0xfab40000-0xfab4ffff 64bit pref]
pci 0000:03:00.3: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
pci 0000:03:00.3: PME# disabled
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: bridge window [mem 0xfab00000-0xfabfffff 64bit pref]
pci 0000:00:02.1: PCI bridge to [bus 14-14]
pci 0000:02:00.0: reg 10: [mem 0xfbf00000-0xfbffffff 64bit]
pci 0000:02:00.0: reg 18: [mem 0xfbef0000-0xfbef03ff 64bit]
pci 0000:02:00.0: reg 20: [io 0x5000-0x50ff]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:00:02.2: PCI bridge to [bus 02-02]
pci 0000:00:02.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.2: bridge window [mem 0xfbe00000-0xfbffffff]
pci 0000:00:02.3: PCI bridge to [bus 15-15]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.1: PCI bridge to [bus 16-16]
pci 0000:00:03.2: PCI bridge to [bus 17-17]
pci 0000:00:03.3: PCI bridge to [bus 18-18]
pci 0000:00:11.0: PCI bridge to [bus 1a-1a]
pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 14: [mem 0xfbdf0000-0xfbdf01ff]
pci 0000:01:00.0: reg 18: [io 0x3400-0x34ff]
pci 0000:01:00.1: reg 10: [mem 0xf9000000-0xf9ffffff pref]
pci 0000:01:00.1: reg 14: [mem 0xfbde0000-0xfbde3fff]
pci 0000:01:00.1: reg 18: [mem 0xfb000000-0xfb7fffff]
pci 0000:01:00.2: reg 10: [io 0x3800-0x38ff]
pci 0000:01:00.2: reg 14: [mem 0xfaff0000-0xfaff00ff]
pci 0000:01:00.2: reg 18: [mem 0xfae00000-0xfaefffff]
pci 0000:01:00.2: reg 1c: [mem 0xfad80000-0xfadfffff]
pci 0000:01:00.2: reg 20: [mem 0xfad70000-0xfad77fff]
pci 0000:01:00.2: reg 24: [mem 0xfad60000-0xfad67fff]
pci 0000:01:00.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.2: PME# disabled
pci 0000:01:00.4: reg 20: [io 0x3c00-0x3c1f]
pci 0000:00:1c.7: PCI bridge to [bus 01-01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbdfffff]
pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 19-19] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfbffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.VRP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT1A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT1B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT2A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT2B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT2C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT2D._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT3A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT3B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT3C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT3D._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.1
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 49, 50, 51, 52, 53, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 49 for MSI
hpet: hpet3 irq 50 for MSI
hpet: hpet4 irq 51 for MSI
hpet: hpet5 irq 52 for MSI
hpet: hpet6 irq 53 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xf8ffe000-0xf8ffffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0070-0x0077]
pnp 00:02: [io 0x0408-0x040f]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x0020-0x003f]
pnp 00:02: [io 0x00a0-0x00bf]
pnp 00:02: [io 0x0090-0x009f]
pnp 00:02: [io 0x0050-0x0053]
pnp 00:02: [io 0x0310-0x0315]
pnp 00:02: [io 0x0316-0x0317]
pnp 00:02: [io 0x0700-0x071f]
pnp 00:02: [io 0x0880-0x08ff]
pnp 00:02: [io 0x0900-0x097f]
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0cd4-0x0cd7]
pnp 00:02: [io 0x0cd0-0x0cd3]
pnp 00:02: [io 0x0f50-0x0f58]
pnp 00:02: [io 0x00f0]
pnp 00:02: [io 0x0ca0-0x0ca1]
pnp 00:02: [io 0x0ca4-0x0ca5]
pnp 00:02: [mem 0xc0000000-0xcfffffff]
pnp 00:02: [mem 0xfe000000-0xfebfffff]
pnp 00:02: [mem 0xfc000000-0xfc000fff]
pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
pnp 00:02: [mem 0xfed30000-0xfed3ffff]
pnp 00:02: [mem 0xfee00000-0xfee00fff]
pnp 00:02: [mem 0xff800000-0xffffffff]
pnp 00:02: [io 0x02f8-0x02ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0ca2-0x0ca3]
pnp 00:03: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [dma 7]
pnp 00:05: [io 0x0000-0x000f]
pnp 00:05: [io 0x0080-0x008f]
pnp 00:05: [io 0x00c0-0x00df]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x002e-0x002f]
pnp 00:07: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:08: [irq 4]
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:09: [io 0x0070-0x0071]
pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xf8ffe000-0xf8ffffff] could not be reserved
system 00:02: [io 0x0408-0x040f] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0310-0x0315] has been reserved
system 00:02: [io 0x0316-0x0317] has been reserved
system 00:02: [io 0x0700-0x071f] has been reserved
system 00:02: [io 0x0880-0x08ff] has been reserved
system 00:02: [io 0x0900-0x097f] has been reserved
system 00:02: [io 0x0cd4-0x0cd7] has been reserved
system 00:02: [io 0x0cd0-0x0cd3] has been reserved
system 00:02: [io 0x0f50-0x0f58] has been reserved
system 00:02: [io 0x0ca0-0x0ca1] has been reserved
system 00:02: [io 0x0ca4-0x0ca5] has been reserved
system 00:02: [io 0x02f8-0x02ff] has been reserved
system 00:02: [mem 0xc0000000-0xcfffffff] has been reserved
system 00:02: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:02: [mem 0xfc000000-0xfc000fff] has been reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed30000-0xfed3ffff] has been reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: [mem 0xff800000-0xffffffff] has been reserved
pci 0000:00:02.0: BAR 14: assigned [mem 0xf8000000-0xf80fffff]
pci 0000:00:02.2: BAR 15: assigned [mem 0xf8100000-0xf81fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 07-07]
pci 0000:00:01.1: PCI bridge to [bus 13-13]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfab00000-0xfab3ffff pref]
pci 0000:03:00.1: BAR 6: assigned [mem 0xf8000000-0xf803ffff pref]
pci 0000:03:00.2: BAR 6: assigned [mem 0xf8040000-0xf807ffff pref]
pci 0000:03:00.3: BAR 6: assigned [mem 0xf8080000-0xf80bffff pref]
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:02.0: bridge window [mem 0xfab00000-0xfabfffff 64bit pref]
pci 0000:00:02.1: PCI bridge to [bus 14-14]
pci 0000:02:00.0: BAR 6: assigned [mem 0xf8100000-0xf817ffff pref]
pci 0000:00:02.2: PCI bridge to [bus 02-02]
pci 0000:00:02.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.2: bridge window [mem 0xfbe00000-0xfbffffff]
pci 0000:00:02.2: bridge window [mem 0xf8100000-0xf81fffff pref]
pci 0000:00:02.3: PCI bridge to [bus 15-15]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.1: PCI bridge to [bus 16-16]
pci 0000:00:03.2: PCI bridge to [bus 17-17]
pci 0000:00:03.3: PCI bridge to [bus 18-18]
pci 0000:00:11.0: PCI bridge to [bus 1a-1a]
pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 01-01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbdfffff]
pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 19-19]
alloc irq_desc for 45 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:01.0: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:01.1: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.1: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:02.1: setting latency timer to 64
pci 0000:00:02.2: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:02.2: setting latency timer to 64
pci 0000:00:02.3: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:02.3: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:03.1: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:03.1: setting latency timer to 64
pci 0000:00:03.2: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:03.2: setting latency timer to 64
pci 0000:00:03.3: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:03.3: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff]
pci_bus 0000:00: resource 6 [io 0x0000-0x03af]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:00: resource 9 [io 0x03b0-0x03bb]
pci_bus 0000:00: resource 10 [io 0x03c0-0x03df]
pci_bus 0000:00: resource 11 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf80fffff]
pci_bus 0000:03: resource 2 [mem 0xfab00000-0xfabfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xf8100000-0xf81fffff pref]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xfad00000-0xfbdfffff]
pci_bus 0000:01: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref]
pci_bus 0000:19: resource 4 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:19: resource 5 [io 0x1000-0xffff]
pci_bus 0000:19: resource 6 [io 0x0000-0x03af]
pci_bus 0000:19: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:19: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:19: resource 9 [io 0x03b0-0x03bb]
pci_bus 0000:19: resource 10 [io 0x03c0-0x03df]
pci_bus 0000:19: resource 11 [mem 0x000a0000-0x000bffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.1: Boot video device
pci 0000:01:00.4: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.4: PCI INT B disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 24779k freed
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:1f.05] not found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 16384 (order: 8, 1048576 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1516692842.800:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15653
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 4E438E799EBCB64C
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
- Added public key CB445E0DA3EA1F65
- User ID: Red Hat Enterprise Linux Driver Update Program (key 4)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[Firmware Bug]: No valid trip found
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 21, io mem 0xfac60000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-696.18.7.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 20, io mem 0xfac50000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-696.18.7.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:00.4: PCI INT B -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:01:00.4: setting latency timer to 64
uhci_hcd 0000:01:00.4: UHCI Host Controller
uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-696.18.7.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:01:00.4
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:09: RTC can wake from S4
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:09: setting system clock to 2018-01-23 07:34:04 UTC (1516692844)
Initalizing network drop monitor service
Freeing unused kernel memory: 1332k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 640k freed
Freeing unused kernel memory: 1544k freed
dracut: dracut-004-409.el6_8.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
udev: starting version 147
usb 1-1: new high speed USB device number 2 using ehci_hcd
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
Refined TSC clocksource calibration: 2194.710 MHz.
Switching to clocksource tsc
ata_piix 0000:00:1f.2: version 2.13
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x4000 ctl 0x4008 bmdma 0x4020 irq 17
ata2: SATA max UDMA/133 cmd 0x4010 ctl 0x4018 bmdma 0x4028 irq 17
usb 3-1: new full speed USB device number 2 using uhci_hcd
usb 3-1: New USB device found, idVendor=03f0, idProduct=7029
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Virtual Keyboard
usb 3-1: Manufacturer: HP
usb 3-1: configuration #1 chosen from 1 choice
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.0/input/input2
generic-usb 0003:03F0:7029.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard ] on usb-0000:01:00.4-1/input0
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.1/input/input3
generic-usb 0003:03F0:7029.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard ] on usb-0000:01:00.4-1/input1
usb 2-1.3: new high speed USB device number 3 using ehci_hcd
usb 2-1.3: New USB device found, idVendor=0424, idProduct=2660
usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.3: configuration #1 chosen from 1 choice
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 2 ports detected
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 0)
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 0)
hpsa: suspicious relative cardinality of products vs hpsa_pci_device_id (52/54)
HP HPSA Driver (v 3.4.8-140)
alloc irq_desc for 34 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
hpsa 0000:02:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
hpsa 0000:02:00.0: setting latency timer to 64
hpsa 0000:02:00.0: MSI-X capable controller
alloc irq_desc for 54 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
hpsa 0000:02:00.0: irq 54 for MSI/MSI-X
alloc irq_desc for 55 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
hpsa 0000:02:00.0: irq 55 for MSI/MSI-X
alloc irq_desc for 56 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
hpsa 0000:02:00.0: irq 56 for MSI/MSI-X
alloc irq_desc for 57 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
hpsa 0000:02:00.0: irq 57 for MSI/MSI-X
hpsa 0000:02:00.0: Using 4 reply queue(s)
Physical aborts supported: yes
Logical aborts supported: no
HP SSD Smart Path aborts supported: no
hpsa 0000:02:00.0: hpsa0: at IRQ 54 using DAC
bft2_offset = 0x8f4
scsi2 : hpsa
hpsa 0000:02:00.0: added scsi 2:3:0:0: RAID HP P420i RAID-UNKNOWN SSDSmartPathCap- En- Exp=4 qd=1024
hpsa 0000:02:00.0: added scsi 2:2:0:0: Direct-Access ATA MB3000GCWLU RAID-UNKNOWN SSDSmartPathCap- En- Exp=2 qd=14
hpsa 0000:02:00.0: added scsi 2:2:1:0: Direct-Access ATA MB3000GCWLU RAID-UNKNOWN SSDSmartPathCap- En- Exp=2 qd=14
hpsa 0000:02:00.0: added scsi 2:2:2:0: Direct-Access ATA MB3000GCWLU RAID-UNKNOWN SSDSmartPathCap- En- Exp=2 qd=14
hpsa 0000:02:00.0: added scsi 2:2:3:0: Direct-Access ATA MB3000GCWLU RAID-UNKNOWN SSDSmartPathCap- En- Exp=2 qd=14
hpsa 0000:02:00.0: added scsi 2:2:4:0: Direct-Access ATA MB3000GCWLU RAID-UNKNOWN SSDSmartPathCap- En- Exp=2 qd=14
hpsa 0000:02:00.0: added scsi 2:2:5:0: Direct-Access ATA MB3000GCWLU RAID-UNKNOWN SSDSmartPathCap- En- Exp=2 qd=14
hpsa 0000:02:00.0: added scsi 2:2:6:0: Direct-Access ATA MB3000GCWLU RAID-UNKNOWN SSDSmartPathCap- En- Exp=2 qd=14
hpsa 0000:02:00.0: added scsi 2:2:7:0: Direct-Access ATA MB3000GCWLU RAID-UNKNOWN SSDSmartPathCap- En- Exp=2 qd=14
hpsa 0000:02:00.0: added scsi 2:2:8:0: Direct-Access ATA MB3000GCWLU RAID-UNKNOWN SSDSmartPathCap- En- Exp=2 qd=14
hpsa 0000:02:00.0: added scsi 2:2:9:0: Direct-Access ATA MB3000GCWLU RAID-UNKNOWN SSDSmartPathCap- En- Exp=2 qd=14
hpsa 0000:02:00.0: added scsi 2:2:10:0: Direct-Access ATA MB3000GCWLU RAID-UNKNOWN SSDSmartPathCap- En- Exp=2 qd=14
hpsa 0000:02:00.0: added scsi 2:2:11:0: Direct-Access ATA MB3000GCWLU RAID-UNKNOWN SSDSmartPathCap- En- Exp=2 qd=14
hpsa 0000:02:00.0: added scsi 2:0:0:0: Direct-Access HP LOGICAL VOLUME RAID-5 SSDSmartPathCap- En- Exp=4 qd=1024
hpsa 0000:02:00.0: added scsi 2:0:0:1: Direct-Access HP LOGICAL VOLUME RAID-5 SSDSmartPathCap- En- Exp=4 qd=1024
scsi 2:3:0:0: RAID HP P420i 6.34 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access HP LOGICAL VOLUME 6.34 PQ: 0 ANSI: 5
scsi 2:0:0:1: Direct-Access HP LOGICAL VOLUME 6.34 PQ: 0 ANSI: 5
sd 2:0:0:1: [sdb] 23441869232 512-byte logical blocks: (12.0 TB/10.9 TiB)
sd 2:0:0:0: [sda] 23441869232 512-byte logical blocks: (12.0 TB/10.9 TiB)
sd 2:0:0:1: [sdb] Write Protect is off
sd 2:0:0:1: [sdb] Mode Sense: 73 00 00 08
sd 2:0:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 73 00 00 08
sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sda: sdb1
sd 2:0:0:1: [sdb] Attached SCSI disk
sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
dracut: Scanning devices sda2 sdb1 for LVM logical volumes vg0/swap vg0/root
dracut: inactive '/dev/vg0/sto' [21.78 TiB] inherit
dracut: inactive '/dev/vg0/root' [48.83 GiB] inherit
dracut: inactive '/dev/vg0/swap' [7.81 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg0-root
dracut: Loading SELinux policy
type=1404 audit(1516692847.637:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 309315 rules.
SELinux: 2048 avtab hash slots, 309315 rules.
SELinux: 9 users, 12 roles, 4215 types, 237 bools, 1 sens, 1024 cats
SELinux: 81 classes, 309315 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1516692848.337:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.137 (May 11, 2014)
alloc irq_desc for 32 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:03:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
tg3 0000:03:00.0: setting latency timer to 64
tg3 0000:03:00.0: eth0: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address 28:80:23:9d:ca:20
tg3 0000:03:00.0: eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
alloc irq_desc for 36 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:03:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
tg3 0000:03:00.1: setting latency timer to 64
tg3 0000:03:00.1: eth1: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address 28:80:23:9d:ca:21
tg3 0000:03:00.1: eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.1: eth1: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:03:00.2: PCI INT A -> GSI 32 (level, low) -> IRQ 32
tg3 0000:03:00.2: setting latency timer to 64
tg3 0000:03:00.2: eth2: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address 28:80:23:9d:ca:22
tg3 0000:03:00.2: eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.2: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.2: eth2: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:03:00.3: PCI INT B -> GSI 36 (level, low) -> IRQ 36
tg3 0000:03:00.3: setting latency timer to 64
tg3 0000:03:00.3: eth3: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address 28:80:23:9d:ca:23
tg3 0000:03:00.3: eth3: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.3: eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.3: eth3: dma_rwctrl[00000001] dma_mask[64-bit]
scsi 2:3:0:0: Attached scsi generic sg0 type 12
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:1: Attached scsi generic sg2 type 0
hpwdt 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
hpwdt: New timer passed in is 30 seconds.
hpwdt 0000:01:00.0: HPE Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 1/ON)
, priority: LAST (default = 0/LAST).
hpwdt 0000:01:00.0: HPE Watchdog Timer Driver: 1.4.0-rh, timer margin: 30 seconds (nowayout=0).
hpilo 0000:01:00.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
hpilo 0000:01:00.2: setting latency timer to 64
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
microcode: CPU0 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU1 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU2 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU3 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU4 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU5 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU6 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU7 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU8 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU9 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU10 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU11 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU12 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU13 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU14 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU15 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU16 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU17 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU18 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU19 sig=0x306e4, pf=0x1, revision=0x428
platform microcode: firmware: requesting intel-ucode/06-3e-04
Microcode Update Driver: v2.00 , Peter Oruba
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:03: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:03: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
ipmi_si 00:03: IPMI kcs interface initialized
power_meter ACPI000D:00: Found ACPI power meter.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS (dm-2): Mounting Filesystem
XFS (dm-2): Ending clean mount
SELinux: initialized (dev dm-2, type xfs), uses xattr
Adding 8191996k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:8191996k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
alloc irq_desc for 58 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:03:00.0: irq 58 for MSI/MSI-X
alloc irq_desc for 59 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:03:00.0: irq 59 for MSI/MSI-X
alloc irq_desc for 60 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:03:00.0: irq 60 for MSI/MSI-X
alloc irq_desc for 61 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:03:00.0: irq 61 for MSI/MSI-X
alloc irq_desc for 62 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:03:00.0: irq 62 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
tg3 0000:03:00.0: eth0: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
type=1305 audit(1516692866.563:4): audit_pid=2420 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1200 MHz, 2200 MHz
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
usb 3-1: USB disconnect, device number 2
ACPI Error: SMBus or IPMI write requires Buffer of length 66, found length 32 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88023ca98240), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-342)
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev loop0, type iso9660), uses genfs_contexts
ACPI Error: SMBus or IPMI write requires Buffer of length 66, found length 32 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88023ca98240), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-342)